aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/microchip/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2024-09-11microchip: lan865x: add driver support for Microchip's LAN865X MAC-PHYParthiban Veerasooran1-0/+1
The LAN8650/1 is designed to conform to the OPEN Alliance 10BASE-T1x MAC-PHY Serial Interface specification, Version 1.1. The IEEE Clause 4 MAC integration provides the low pin count standard SPI interface to any microcontroller therefore providing Ethernet functionality without requiring MAC integration within the microcontroller. The LAN8650/1 operates as an SPI client supporting SCLK clock rates up to a maximum of 25 MHz. This SPI interface supports the transfer of both data (Ethernet frames) and control (register access). By default, the chunk data payload is 64 bytes in size. The Ethernet Media Access Controller (MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible with the IEEE 802.3 standard. 10BASE-T1S physical layer transceiver integrated is into the LAN8650/1. The PHY and MAC are connected via an internal Media Independent Interface (MII). Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Parthiban Veerasooran <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-04net: microchip: add FDMA libraryDaniel Machon1-0/+1
Add new FDMA library for interacting with the FDMA engine on Microchip Sparx5 and lan966x switch chips, in an effort to reduce duplicate code and provide a common set of symbols and functions. Signed-off-by: Daniel Machon <[email protected]> Reviewed-by: Steen Hegelund <[email protected]> Reviewed-by: Jens Emil Schulz Østergaard <[email protected]> Reviewed-by: Horatiu Vultur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-24net: microchip: sparx5: Adding initial tc flower support for VCAP APISteen Hegelund1-0/+1
This adds initial TC flower filter support to Sparx5 for the IS2 VCAP. The support consists of the source and destination MAC addresses, and the trap and pass actions. This is how you can create a rule that test the functionality: tc qdisc add dev eth0 clsact tc filter add dev eth0 ingress chain 8000000 prio 10 handle 10 \ protocol all flower skip_sw \ dst_mac 0a:0b:0c:0d:0e:0f \ src_mac 2:0:0:0:0:1 \ action trap The IS2 chains in Sparx5 are assigned like this: - chain 8000000: IS2 Lookup 0 - chain 8100000: IS2 Lookup 1 - chain 8200000: IS2 Lookup 2 - chain 8300000: IS2 Lookup 3 Signed-off-by: Steen Hegelund <[email protected]> Tested-by: Casper Andersson <[email protected]> Reviewed-by: Casper Andersson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29net: lan966x: add the basic lan966x driverHoratiu Vultur1-0/+1
This patch adds basic SwitchDev driver framework for lan966x. It includes only the IO range mapping and probing of the switch. Signed-off-by: Horatiu Vultur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-24net: sparx5: add the basic sparx5 driverSteen Hegelund1-0/+2
This adds the Sparx5 basic SwitchDev driver framework with IO range mapping, switch device detection and core clock configuration. Support for ports, phylink, netdev, mactable etc. are in the following patches. Signed-off-by: Steen Hegelund <[email protected]> Signed-off-by: Bjarni Jonasson <[email protected]> Signed-off-by: Lars Povlsen <[email protected]> Reviewed-by: Philipp Zabel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-08-11lan743x: lan743x: Add PTP supportBryan Whitehead1-1/+1
PTP support includes: Ingress, and egress timestamping. One step timestamping available. PTP clock support. Periodic output support. Signed-off-by: Bryan Whitehead <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-23lan743x: Add support for ethtool get_drvinfoBryan Whitehead1-1/+1
Implement ethtool get_drvinfo Signed-off-by: Bryan Whitehead <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-07lan743x: Add main source files for new lan743x driverBryan Whitehead1-0/+3
Add main source files for new lan743x driver Signed-off-by: Bryan Whitehead <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-10-08net: Microchip encx24j600 driverJon Ringle1-0/+1
This ethernet driver supports the Micorchip enc424j600/626j600 Ethernet controller over a SPI bus interface. This driver makes use of the regmap API to optimize access to registers by caching registers where possible. Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/39935b.pdf Signed-off-by: Jon Ringle <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-10-06Revert "net: Microchip encx24j600 driver"David S. Miller1-1/+0
This reverts commit 04fbfce7a222327b97ca165294ef19f0faa45960.
2015-10-05net: Microchip encx24j600 driverJon Ringle1-0/+1
This ethernet driver supports the Micorchip enc424j600/626j600 Ethernet controller over a SPI bus interface. This driver makes use of the regmap API to optimize access to registers by caching registers where possible. Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/39935b.pdf Signed-off-by: Jon Ringle <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-12enc28j60: Move the Microchip driverJeff Kirsher1-0/+5
Move the Microchip driver into drivers/net/ethernet/microchip/ and make the necessary Kconfig and Makefile changes. CC: Claudio Lanconelli <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.