aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2024-03-04eth: igc: remove unused embedded struct net_deviceJakub Kicinski1-1/+0
struct net_device poll_dev in struct igc_q_vector was added in one of the initial commits, but never used. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-03-04net: adopt skb_network_header_len() more broadlyEric Dumazet2-2/+2
(skb_transport_header(skb) - skb_network_header(skb)) can be replaced by skb_network_header_len(skb) Add a DEBUG_NET_WARN_ON_ONCE() in skb_network_header_len() to catch cases were the transport_header was not set. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-03-04net: adopt skb_network_offset() and similar helpersEric Dumazet7-7/+7
This is a cleanup patch, making code a bit more concise. 1) Use skb_network_offset(skb) in place of (skb_network_header(skb) - skb->data) 2) Use -skb_network_offset(skb) in place of (skb->data - skb_network_header(skb)) 3) Use skb_transport_offset(skb) in place of (skb_transport_header(skb) - skb->data) 4) Use skb_inner_transport_offset(skb) in place of (skb_inner_transport_header(skb) - skb->data) Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Edward Cree <[email protected]> # for sfc Signed-off-by: David S. Miller <[email protected]>
2024-03-01ice: reconfig host after changing MSI-X on VFMichal Swiatkowski1-2/+9
During VSI reconfiguration filters and VSI config which is set in ice_vf_init_host_cfg() are lost. Recall the host configuration function to restore them. Without this config VF on which MSI-X amount was changed might had a connection problems. Fixes: 4d38cb44bd32 ("ice: manage VFs MSI-X using resource tracking") Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Michal Swiatkowski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2024-03-01ice: reorder disabling IRQ and NAPI in ice_qp_disMaciej Fijalkowski1-4/+5
ice_qp_dis() currently does things in very mixed way. Tx is stopped before disabling IRQ on related queue vector, then it takes care of disabling Rx and finally NAPI is disabled. Let us start with disabling IRQs in the first place followed by turning off NAPI. Then it is safe to handle queues. One subtle change on top of that is that even though ice_qp_ena() looks more sane, clear ICE_CFG_BUSY as the last thing there. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Chandan Kumar Rout <[email protected]> (A Contingent Worker at Intel) Acked-by: Magnus Karlsson <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2024-03-01i40e: disable NAPI right after disabling irqs when handling xsk_poolMaciej Fijalkowski1-1/+1
Disable NAPI before shutting down queues that this particular NAPI contains so that the order of actions in i40e_queue_pair_disable() mirrors what we do in i40e_queue_pair_enable(). Fixes: 123cecd427b6 ("i40e: added queue pair disable/enable functions") Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Chandan Kumar Rout <[email protected]> (A Contingent Worker at Intel) Acked-by: Magnus Karlsson <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2024-03-01ixgbe: {dis, en}able irqs in ixgbe_txrx_ring_{dis, en}ableMaciej Fijalkowski1-7/+49
Currently routines that are supposed to toggle state of ring pair do not take care of associated interrupt with queue vector that these rings belong to. This causes funky issues such as dead interface due to irq misconfiguration, as per Pavel's report from Closes: tag. Add a function responsible for disabling single IRQ in EIMC register and call this as a very first thing when disabling ring pair during xsk_pool setup. For enable let's reuse ixgbe_irq_enable_queues(). Besides this, disable/enable NAPI as first/last thing when dealing with closing or opening ring pair that xsk_pool is being configured on. Reported-by: Pavel Vazharov <[email protected]> Closes: https://lore.kernel.org/netdev/CAJEV1ijxNyPTwASJER1bcZzS9nMoZJqfR86nu_3jFFVXzZQ4NA@mail.gmail.com/ Fixes: 024aa5800f32 ("ixgbe: added Rx/Tx ring disable/enable functions") Signed-off-by: Maciej Fijalkowski <[email protected]> Acked-by: Magnus Karlsson <[email protected]> Tested-by: Chandan Kumar Rout <[email protected]> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-41/+164
Cross-merge networking fixes after downstream PR. Conflicts: net/mptcp/protocol.c adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket") 9426ce476a70 ("mptcp: annotate lockless access for RX path fields") https://lore.kernel.org/all/[email protected]/ Adjacent changes: drivers/dpll/dpll_core.c 0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()") e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order") drivers/net/veth.c 1ce7d306ea63 ("veth: try harder when allocating queue memory") 0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers") drivers/net/wireless/intel/iwlwifi/mvm/d3.c 8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO") 78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists") net/wireless/nl80211.c f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change") 414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately") Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-28igb: extend PTP timestamp adjustments to i211Oleksij Rempel1-2/+3
The i211 requires the same PTP timestamp adjustments as the i210, according to its datasheet. To ensure consistent timestamping across different platforms, this change extends the existing adjustments to include the i211. The adjustment result are tested and comparable for i210 and i211 based systems. Fixes: 3f544d2a4d5c ("igb: adjust PTP timestamps for Tx/Rx latency") Signed-off-by: Oleksij Rempel <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-28net: intel: igc: Use linkmode helpers for EEEAndrew Lunn1-4/+5
Make use of the existing linkmode helpers for converting PHY EEE register values into links modes, now that ethtool_keee uses link modes, rather than u32 values. Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-28net: intel: igb: Use linkmode helpers for EEEAndrew Lunn1-12/+23
Make use of the existing linkmode helpers for converting PHY EEE register values into links modes, now that ethtool_keee uses link modes, rather than u32 values. Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-28net: intel: e1000e: Use linkmode helpers for EEEAndrew Lunn1-5/+12
Make use of the existing linkmode helpers for converting PHY EEE register values into links modes, now that ethtool_keee uses link modes, rather than u32 values. Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-28net: intel: i40e/igc: Remove setting Autoneg in EEE capabilitiesAndrew Lunn2-10/+1
Energy Efficient Ethernet should always be negotiated with the link peer. Don't include SUPPORTED_Autoneg in the results of get_eee() for supported, advertised or lp_advertised, since it is assumed. Additionally, ethtool(1) ignores the set bit, and no other driver sets this. Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-28net: ethernet: ixgbe: Convert EEE to use linkmodesAndrew Lunn1-23/+25
Convert the tables to make use of ETHTOOL link mode bits, rather than the old u32 SUPPORTED speeds. Make use of the linkmode helps to set bits and compare linkmodes. As a result, the _u32 members of keee are no longer used, a step towards removing them. Signed-off-by: Andrew Lunn <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-20ice: Fix ASSERT_RTNL() warning during certain scenariosAmritha Nambiar4-26/+83
Commit 91fdbce7e8d6 ("ice: Add support in the driver for associating queue with napi") invoked the netif_queue_set_napi() call. This kernel function requires to be called with rtnl_lock taken, otherwise ASSERT_RTNL() warning will be triggered. ice_vsi_rebuild() initiating this call is under rtnl_lock when the rebuild is in response to configuration changes from external interfaces (such as tc, ethtool etc. which holds the lock). But, the VSI rebuild generated from service tasks and resets (PFR/CORER/GLOBR) is not under rtnl lock protection. Handle these cases as well to hold lock before the kernel call (by setting the 'locked' boolean to false). netif_queue_set_napi() is also used to clear previously set napi in the q_vector unroll flow. Handle this for locked/lockless execution paths. Fixes: 91fdbce7e8d6 ("ice: Add support in the driver for associating queue with napi") Signed-off-by: Amritha Nambiar <[email protected]> Reviewed-by: Sridhar Samudrala <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-20ice: fix pin phase adjust updates on PF resetArkadiusz Kubalewski1-0/+3
Do not allow to set phase adjust value for a pin if PF reset is in progress, this would cause confusing netlink extack errors as the firmware cannot process the request properly during the reset time. Return (-EBUSY) and report extack error for the user who tries configure pin phase adjust during the reset time. Test by looping execution of below steps until netlink error appears: - perform PF reset $ echo 1 > /sys/class/net/<ice PF>/device/reset - change pin phase adjust value: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \ --do pin-set --json '{"id":0, "phase-adjust":1000}' Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks") Reviewed-by: Igor Bagnucki <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-20ice: fix dpll periodic work data updates on PF resetArkadiusz Kubalewski1-1/+4
Do not allow dpll periodic work function to acquire data from firmware if PF reset is in progress. Acquiring data will cause dmesg errors as the firmware cannot respond or process the request properly during the reset time. Test by looping execution of below step until dmesg error appears: - perform PF reset $ echo 1 > /sys/class/net/<ice PF>/device/reset Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reviewed-by: Igor Bagnucki <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-20ice: fix dpll and dpll_pin data access on PF resetArkadiusz Kubalewski1-0/+38
Do not allow to acquire data or alter configuration of dpll and pins through firmware if PF reset is in progress, this would cause confusing netlink extack errors as the firmware cannot respond or process the request properly during the reset time. Return (-EBUSY) and extack error for the user who tries access/modify the config of dpll/pin through firmware during the reset time. The PF reset and kernel access to dpll data are both asynchronous. It is not possible to guard all the possible reset paths with any determinictic approach. I.e., it is possible that reset starts after reset check is performed (or if the reset would be checked after mutex is locked), but at the same time it is not possible to wait for dpll mutex unlock in the reset flow. This is best effort solution to at least give a clue to the user what is happening in most of the cases, knowing that there are possible race conditions where the user could see a different error received from firmware due to reset unexpectedly starting. Test by looping execution of below steps until netlink error appears: - perform PF reset $ echo 1 > /sys/class/net/<ice PF>/device/reset - i.e. try to alter/read dpll/pin config: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \ --dump pin-get Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reviewed-by: Aleksandr Loktionov <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-20ice: fix dpll input pin phase_adjust value updatesArkadiusz Kubalewski1-1/+1
The value of phase_adjust for input pin shall be updated in ice_dpll_pin_state_update(..). Fix by adding proper argument to the firmware query function call - a pin's struct field pointer where the phase_adjust value during driver runtime is stored. Previously the phase_adjust used to misinform user about actual phase_adjust value. I.e., if phase_adjust was set to a non zero value and if driver was reloaded, the user would see the value equal 0, which is not correct - the actual value is equal to value set before driver reload. Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks") Reviewed-by: Alan Brady <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-20ice: fix connection state of DPLL and out pinYochai Hagvi1-11/+32
Fix the connection state between source DPLL and output pin, updating the attribute 'state' of 'parent_device'. Previously, the connection state was broken, and didn't reflect the correct state. When 'state_on_dpll_set' is called with the value 'DPLL_PIN_STATE_CONNECTED' (1), the output pin will switch to the given DPLL, and the state of the given DPLL will be set to connected. E.g.: --do pin-set --json '{"id":2, "parent-device":{"parent-id":1, "state": 1 }}' This command will connect DPLL device with id 1 to output pin with id 2. When 'state_on_dpll_set' is called with the value 'DPLL_PIN_STATE_DISCONNECTED' (2) and the given DPLL is currently connected, then the output pin will be disabled. E.g: --do pin-set --json '{"id":2, "parent-device":{"parent-id":1, "state": 2 }}' This command will disable output pin with id 2 if DPLL device with ID 1 is connected to it; otherwise, the command is ignored. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reviewed-by: Wojciech Drewek <[email protected]> Reviewed-by: Arkadiusz Kubalewski <[email protected]> Signed-off-by: Yochai Hagvi <[email protected]> Tested-by: Sunitha Mekala <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-16i40e: Remove VEB recursionIvan Vecera3-109/+76
The VEB (virtual embedded switch) as a switch element can be connected according datasheet though its uplink to: - Physical port - Port Virtualizer (not used directly by i40e driver but can be present in MFP mode where the physical port is shared between PFs) - No uplink (aka floating VEB) But VEB uplink cannot be connected to another VEB and any attempt to do so results in: "i40e 0000:02:00.0: couldn't add VEB, err -EIO aq_err I40E_AQ_RC_ENOENT" that indicates "the uplink SEID does not point to valid element". Remove this logic from the driver code this way: 1) For debugfs only allow to build floating VEB (uplink_seid == 0) or main VEB (uplink_seid == mac_seid) 2) Do not recurse in i40e_veb_link_event() as no VEB cannot have sub-VEBs 3) Ditto for i40e_veb_rebuild() + simplify the function as we know that the VEB for rebuild can be only the main LAN VEB or some of the floating VEBs 4) In i40e_rebuild() there is no need to check veb->uplink_seid as the possible ones are 0 and MAC SEID 5) In i40e_vsi_release() do not take into account VEBs whose uplink is another VEB as this is not possible 6) Remove veb_idx field from i40e_veb as a VEB cannot have sub-VEBs Tested using i40e debugfs interface: 1) Initial state [root@cnb-03 net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command" [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c [ 98.440641] i40e 0000:02:00.0: header: 3 reported 3 total [ 98.446053] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 98.452593] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 98.458856] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 2) Add floating VEB [root@cnb-03 net-next]# echo add relay > $CMD [root@cnb-03 net-next]# dmesg -c [ 122.745630] i40e 0000:02:00.0: added relay 162 [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c [ 136.650049] i40e 0000:02:00.0: header: 4 reported 4 total [ 136.655466] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 136.661994] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 136.668264] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 [ 136.674787] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 3) Add VMDQ2 VSI to this new VEB [root@cnb-03 net-next]# dmesg -c [ 168.351763] i40e 0000:02:00.0: added VSI 394 to relay 162 [ 168.374652] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c [ 195.683204] i40e 0000:02:00.0: header: 5 reported 5 total [ 195.688611] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 195.695143] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 195.701410] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 195.707935] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 195.714201] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 4) Try to delete the VEB [root@cnb-03 net-next]# echo del relay 162 > $CMD [root@cnb-03 net-next]# dmesg -c [ 239.260901] i40e 0000:02:00.0: deleting relay 162 [ 239.265621] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left 5) Do PF reset and check switch status after rebuild [root@cnb-03 net-next]# echo pfr > $CMD [root@cnb-03 net-next]# echo dump switch > $CMD [root@cnb-03 net-next]# dmesg -c ... [ 272.333655] i40e 0000:02:00.0: header: 5 reported 5 total [ 272.339066] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 272.345599] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 272.351862] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 272.358387] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 272.364654] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 6) Delete VSI and delete VEB [ 297.199116] i40e 0000:02:00.0: deleting VSI 394 [ 299.807580] i40e 0000:02:00.0: deleting relay 162 [ 309.767905] i40e 0000:02:00.0: header: 3 reported 3 total [ 309.773318] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 309.779845] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 309.786111] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2024-02-16i40e: Fix broken support for floating VEBsIvan Vecera2-49/+67
Although the i40e supports so-called floating VEB (VEB without an uplink connection to external network), this support is broken. This functionality is currently unused (except debugfs) but it will be used by subsequent series for switchdev mode slow-path. Fix this by following: 1) Handle correctly floating VEB (VEB with uplink_seid == 0) in i40e_reconstitute_veb() and look for owner VSI and create it only for non-floating VEBs and also set bridge mode only for such VEBs as the floating ones are using always VEB mode. 2) Handle correctly floating VEB in i40e_veb_release() and disallow its release when there are some VSIs. This is different from regular VEB that have owner VSI that is connected to VEB's uplink after VEB deletion by FW. 3) Fix i40e_add_veb() to handle 'vsi' that is NULL for floating VEBs. For floating VEB use 0 for downlink SEID and 'true' for 'default_port' parameters as per datasheet. 4) Fix 'add relay' command in i40e_dbg_command_write() to allow to create floating VEB by 'add relay 0 0' or 'add relay' Tested using debugfs: 1) Initial state [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 173.701286] i40e 0000:02:00.0: header: 3 reported 3 total [ 173.706701] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 173.713241] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 173.719507] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 2) Add floating VEB [root@host net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command" [root@host net-next]# echo add relay > $CMD [root@host net-next]# dmesg -c [ 245.551720] i40e 0000:02:00.0: added relay 162 [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 276.984371] i40e 0000:02:00.0: header: 4 reported 4 total [ 276.989779] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 276.996302] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 277.002569] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 [ 277.009091] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 3) Add VMDQ2 VSI to this new VEB [root@host net-next]# echo add vsi 162 > $CMD [root@host net-next]# dmesg -c [ 332.314030] i40e 0000:02:00.0: added VSI 394 to relay 162 [ 332.337486] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 387.284490] i40e 0000:02:00.0: header: 5 reported 5 total [ 387.289904] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 387.296446] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 387.302708] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 387.309234] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 387.315500] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 4) Try to delete the VEB [root@host net-next]# echo del relay 162 > $CMD [root@host net-next]# dmesg -c [ 428.749297] i40e 0000:02:00.0: deleting relay 162 [ 428.754011] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left 5) Do PF reset and check switch status after rebuild [root@host net-next]# echo pfr > $CMD [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 738.056172] i40e 0000:02:00.0: header: 5 reported 5 total [ 738.061577] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16 [ 738.068104] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0 [ 738.074367] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 738.080892] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 738.087160] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 6) Delete VSI and delete VEB [root@host net-next]# echo del vsi 394 > $CMD [root@host net-next]# echo del relay 162 > $CMD [root@host net-next]# echo dump switch > $CMD [root@host net-next]# dmesg -c [ 1233.081126] i40e 0000:02:00.0: deleting VSI 394 [ 1239.345139] i40e 0000:02:00.0: deleting relay 162 [ 1244.886920] i40e 0000:02:00.0: header: 3 reported 3 total [ 1244.892328] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16 [ 1244.898853] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0 [ 1244.905119] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16 Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2024-02-16i40e: Add helpers to find VSI and VEB by SEID and use themIvan Vecera3-86/+68
Add two helpers i40e_(veb|vsi)_get_by_seid() to find corresponding VEB or VSI by their SEID value and use these helpers to replace existing open-coded loops. Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2024-02-16i40e: Introduce and use macros for iterating VSIs and VEBsIvan Vecera4-245/+264
Introduce i40e_for_each_vsi() and i40e_for_each_veb() helper macros and use them to iterate relevant arrays. Replace pattern: for (i = 0; i < pf->num_alloc_vsi; i++) by: i40e_for_each_vsi(pf, i, vsi) and pattern: for (i = 0; i < I40E_MAX_VEB; i++) by i40e_for_each_veb(pf, i, veb) These macros also check if array item pf->vsi[i] or pf->veb[i] are not NULL and skip such items so we can remove redundant checks from loop bodies. Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2024-02-16i40e: Use existing helper to find flow director VSIIvan Vecera1-7/+4
Use existing i40e_find_vsi_by_type() to find a VSI associated with flow director. Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2024-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski8-45/+90
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/dev.c 9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()") 723de3ebef03 ("net: free altname using an RCU callback") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.") drivers/net/ethernet/renesas/ravb_main.c ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path" ) c2da9408579d ("ravb: Add Rx checksum offload support for GbEth") net/mptcp/protocol.c bdd70eb68913 ("mptcp: drop the push_pending field") 28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields") Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-15Merge branch '1GbE' of ↵Jakub Kicinski3-23/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-02-06 (igb, igc) This series contains updates to igb and igc drivers. Kunwu Chan adjusts firmware version string implementation to resolve possible NULL pointer issue for igb. Sasha removes workaround on igc. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igc: Remove temporary workaround igb: Fix string truncation warnings in igb_set_fw_version ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-15igc: Add support for LEDs on i225/i226Kurt Kanzenbach6-0/+301
Add support for LEDs on i225/i226. The LEDs can be controlled via sysfs from user space using the netdev trigger. The LEDs are named as igc-<bus><device>-<led> to be easily identified. Offloading link speed and activity are supported. Other modes are simulated in software by using on/off. Tested on Intel i225. Signed-off-by: Kurt Kanzenbach <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-14ice: Add check for lport extraction to LAG initDave Ertman2-2/+26
To fully support initializing the LAG support code, a DDP package that extracts the logical port from the metadata is required. If such a package is not present, there could be difficulties in supporting some bond types. Add a check into the initialization flow that will bypass the new paths if any of the support pieces are missing. Reviewed-by: Przemek Kitszel <[email protected]> Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG") Signed-off-by: Dave Ertman <[email protected]> Reviewed-by: Marcin Szycik <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Sujai Buvaneswaran <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-14igc: Remove temporary workaroundSasha Neftin1-5/+1
PHY_CONTROL register works as defined in the IEEE 802.3 specification (IEEE 802.3-2008 22.2.4.1). Tidy up the temporary workaround. User impact: PHY can now be powered down when the ethernet link is down. Testing hints: ip link set down <device> (or just disconnect the ethernet cable). Oldest tested NVM version is: 1045:740. Fixes: 5586838fe9ce ("igc: Add code for PHY support") Signed-off-by: Sasha Neftin <[email protected]> Reviewed-by: Paul Menzel <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2024-02-14igb: Fix string truncation warnings in igb_set_fw_versionKunwu Chan2-18/+19
Commit 1978d3ead82c ("intel: fix string truncation warnings") fixes '-Wformat-truncation=' warnings in igb_main.c by using kasprintf. drivers/net/ethernet/intel/igb/igb_main.c:3092:53: warning：‘%d’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 1 and 13 [-Wformat-truncation=] 3092 | "%d.%d, 0x%08x, %d.%d.%d", | ^~ drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535] 3092 | "%d.%d, 0x%08x, %d.%d.%d", | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535] drivers/net/ethernet/intel/igb/igb_main.c:3090:25: note：‘snprintf’ output between 23 and 43 bytes into a destination of size 32 kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Fix this warning by using a larger space for adapter->fw_version, and then fall back and continue to use snprintf. Fixes: 1978d3ead82c ("intel: fix string truncation warnings") Signed-off-by: Kunwu Chan <[email protected]> Cc: Kunwu Chan <[email protected]> Suggested-by: Jakub Kicinski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-14Merge branch '40GbE' of ↵David S. Miller2-15/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-02-12 (i40e) This series contains updates to i40e driver only. Ivan Vecera corrects the looping value used while waiting for queues to be disabled as well as an incorrect mask being used for DCB configuration. Maciej resolves an issue related to XDP traffic; removing a double call to i40e_pf_rxq_wait() and accounting for XDP rings when stopping rings. ==================== Signed-off-by: David S. Miller <[email protected]>
2024-02-12i40e: take into account XDP Tx queues when stopping ringsMaciej Fijalkowski1-6/+8
Seth reported that on his side XDP traffic can not survive a round of down/up against i40e interface. Dmesg output was telling us that we were not able to disable the very first XDP ring. That was due to the fact that in i40e_vsi_stop_rings() in a pre-work that is done before calling i40e_vsi_wait_queues_disabled(), XDP Tx queues were not taken into the account. To fix this, let us distinguish between Rx and Tx queue boundaries and take into the account XDP queues for Tx side. Reported-by: Seth Forshee <[email protected]> Closes: https://lore.kernel.org/netdev/ZbkE7Ep1N1Ou17sA@do-x1extreme/ Fixes: 65662a8dcdd0 ("i40e: Fix logic of disabling queues") Tested-by: Seth Forshee <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Maciej Fijalkowski <[email protected]> Reviewed-by: Ivan Vecera <[email protected]> Tested-by: Chandan Kumar Rout <[email protected]> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-12i40e: avoid double calling i40e_pf_rxq_wait()Maciej Fijalkowski1-9/+3
Currently, when interface is being brought down and i40e_vsi_stop_rings() is called, i40e_pf_rxq_wait() is called two times, which is wrong. To showcase this scenario, simplified call stack looks as follows: i40e_vsi_stop_rings() i40e_control wait rx_q() i40e_control_rx_q() i40e_pf_rxq_wait() i40e_vsi_wait_queues_disabled() i40e_pf_rxq_wait() // redundant call To fix this, let us s/i40e_control_wait_rx_q/i40e_control_rx_q within i40e_vsi_stop_rings(). Fixes: 65662a8dcdd0 ("i40e: Fix logic of disabling queues") Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Maciej Fijalkowski <[email protected]> Reviewed-by: Ivan Vecera <[email protected]> Tested-by: Chandan Kumar Rout <[email protected]> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-12i40e: Fix wrong mask used during DCB configIvan Vecera1-1/+1
Mask used for clearing PRTDCB_RETSTCC register in function i40e_dcb_hw_rx_ets_bw_config() is incorrect as there is used define I40E_PRTDCB_RETSTCC_ETSTC_SHIFT instead of define I40E_PRTDCB_RETSTCC_ETSTC_MASK. The PRTDCB_RETSTCC register is used to configure whether ETS or strict priority is used as TSA in Rx for particular TC. In practice it means that once the register is set to use ETS as TSA then it is not possible to switch back to strict priority without CoreR reset. Fix the value in the clearing mask. Fixes: 90bc8e003be2 ("i40e: Add hardware configuration for software based DCB") Signed-off-by: Ivan Vecera <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-12i40e: Fix waiting for queues of all VSIs to be disabledIvan Vecera1-1/+1
The function i40e_pf_wait_queues_disabled() iterates all PF's VSIs up to 'pf->hw.func_caps.num_vsis' but this is incorrect because the real number of VSIs can be up to 'pf->num_alloc_vsi' that can be higher. Fix this loop. Fixes: 69129dc39fac ("i40e: Modify Tx disable wait flow in case of DCB reconfiguration") Signed-off-by: Ivan Vecera <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-12i40e: Do not allow untrusted VF to remove administratively set MACIvan Vecera1-5/+33
Currently when PF administratively sets VF's MAC address and the VF is put down (VF tries to delete all MACs) then the MAC is removed from MAC filters and primary VF MAC is zeroed. Do not allow untrusted VF to remove primary MAC when it was set administratively by PF. Reproducer: 1) Create VF 2) Set VF interface up 3) Administratively set the VF's MAC 4) Put VF interface down [root@host ~]# echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs [root@host ~]# ip link set enp2s0f0v0 up [root@host ~]# ip link set enp2s0f0 vf 0 mac fe:6c:b5:da:c7:7d [root@host ~]# ip link show enp2s0f0 23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff vf 0 link/ether fe:6c:b5:da:c7:7d brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off [root@host ~]# ip link set enp2s0f0v0 down [root@host ~]# ip link show enp2s0f0 23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff vf 0 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off Fixes: 700bbf6c1f9e ("i40e: allow VF to remove any MAC filter") Fixes: ceb29474bbbc ("i40e: Add support for VF to specify its primary MAC address") Signed-off-by: Ivan Vecera <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-12ice: Fix debugfs with devlink reloadWojciech Drewek4-2/+14
During devlink reload it is needed to remove debugfs entries correlated with only one PF. ice_debugfs_exit() removes all entries created by ice driver so we can't use it. Introduce ice_debugfs_pf_deinit() in order to release PF's debugfs entries. Move ice_debugfs_exit() call to ice_module_exit(), it makes more sense since ice_debugfs_init() is called in ice_module_init() and not in ice_probe(). Signed-off-by: Wojciech Drewek <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Reviewed-by: Brett Creeley <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2024-02-12ice: Remove and readd netdev during devlink reloadWojciech Drewek3-131/+125
Recent changes to the devlink reload (commit 9b2348e2d6c9 ("devlink: warn about existing entities during reload-reinit")) force the drivers to destroy devlink ports during reinit. Adjust ice driver to this requirement, unregister netdvice, destroy devlink port. ice_init_eth() was removed and all the common code between probe and reload was moved to ice_load(). During devlink reload we can't take devl_lock (it's already taken) and in ice_probe() we have to lock it. Use devl_* variant of the API which does not acquire and release devl_lock. Guard ice_load() with devl_lock only in case of probe. Suggested-by: Jiri Pirko <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Vadim Fedorenko <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Brett Creeley <[email protected]> Signed-off-by: Wojciech Drewek <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-12ice: add support for 3k signing DDP sections for E825CGrzegorz Nitka2-0/+10
E825C devices shall support the new signing type of RSA 3K for new DDP section (SEGMENT_SIGN_TYPE_RSA3K_E825 (5) - already in the code). The driver is responsible to verify the presence of correct signing type. Add 3k signinig support for E825C devices based on mac_type: ICE_MAC_GENERIC_3K_E825; Signed-off-by: Grzegorz Nitka <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-12ice: Add helper function ice_is_generic_macGrzegorz Nitka5-3/+19
E800 series devices have a couple of quirks: 1. Sideband control queues are not supported 2. The registers that the driver needs to program for the "Precision Time Protocol (PTP)" feature are different for E800 series devices compared to other devices supported by this driver. Both these require conditional logic based on the underlying device we are dealing with. The function ice_is_sbq_supported added by commit 8f5ee3c477a8 ("ice: add support for sideband messages") addresses (1). The same function can be used to address (2) as well but this just looks weird readability wise in cases that have nothing to do with sideband control queues: if (ice_is_sbq_supported(hw)) /* program register A */ else /* program register B */ For these cases, the function ice_is_generic_mac introduced by this patch communicates the idea/intention better. Also rework ice_is_sbq_supported to use this new function. As side-band queue is supported for E825C devices, it's mac_type is considered as generic mac_type. Co-developed-by: Anirudh Venkataramanan <[email protected]> Signed-off-by: Anirudh Venkataramanan <[email protected]> Signed-off-by: Grzegorz Nitka <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-12ice: introduce new E825C devices familyGrzegorz Nitka4-0/+32
Introduce new Intel Ethernet E825C family devices. Add new PCI device IDs which are going to be supported by the driver: - 579C: Intel(R) Ethernet Connection E825-C for backplane - 579D: Intel(R) Ethernet Connection E825-C for QSFP - 579E: Intel(R) Ethernet Connection E825-C for SFP - 579F: Intel(R) Ethernet Connection E825-C for SGMII Add helper function ice_is_e825c() to verify if the running device belongs to E825C family. Co-developed-by: Jan Glaza <[email protected]> Signed-off-by: Jan Glaza <[email protected]> Co-developed-by: Michal Michalik <[email protected]> Signed-off-by: Michal Michalik <[email protected]> Signed-off-by: Grzegorz Nitka <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2024-02-09Merge branch '1GbE' of ↵Jakub Kicinski3-13/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== igc: ethtool: Flex filter cleanup Kurt Kanzenbach says: This series contains some cosmetics for the flex filter code. The fixes have been merged separately via -net already. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igc: Unify filtering rule fields igc: Use netdev printing functions for flex filters igc: Use reverse xmas tree ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-08Merge branch '10GbE' of ↵Jakub Kicinski22-832/+808
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-02-06 (ixgbe) This series contains updates to ixgbe driver only. Jedrzej continues cleanup work from conversion away from ixgbe_status; s32 values are changed to int, various style issues are addressed, and some return statements refactored to address some smatch warnings. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ixgbe: Clarify the values of the returning status ixgbe: Rearrange args to fix reverse Christmas tree ixgbe: Convert ret val type from s32 to int ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-3/+3
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/stmicro/stmmac/common.h 38cc3c6dcc09 ("net: stmmac: protect updates of 64-bit statistics counters") fd5a6a71313e ("net: stmmac: est: Per Tx-queue error count for HLBF") c5c3e1bfc9e0 ("net: stmmac: Offload queueMaxSDU from tc-taprio") drivers/net/wireless/microchip/wilc1000/netdev.c c9013880284d ("wifi: fill in MODULE_DESCRIPTION()s for wilc1000") 328efda22af8 ("wifi: wilc1000: do not realloc workqueue everytime an interface is added") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 1279f9d9dec2 ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.") Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-07igc: Unify filtering rule fieldsKurt Kanzenbach3-7/+9
All filtering parameters such as EtherType and VLAN TCI are stored in host byte order except for the VLAN EtherType. Unify it. Signed-off-by: Kurt Kanzenbach <[email protected]> Acked-by: Vinicius Costa Gomes <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2024-02-07igc: Use netdev printing functions for flex filtersKurt Kanzenbach1-5/+4
All igc filter implementations use netdev_*() printing functions except for the flex filters. Unify it. Signed-off-by: Kurt Kanzenbach <[email protected]> Acked-by: Vinicius Costa Gomes <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2024-02-07igc: Use reverse xmas treeKurt Kanzenbach1-1/+1
Use reverse xmas tree coding style convention in igc_add_flex_filter(). Signed-off-by: Kurt Kanzenbach <[email protected]> Acked-by: Vinicius Costa Gomes <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2024-02-07net: intel: fix old compiler regressionsJesse Brandeburg3-3/+3
The kernel build regressions/improvements email contained a couple of issues with old compilers (in fact all the reports were on different architectures, but all gcc 5.5) and the FIELD_PREP() and FIELD_GET() conversions. They're all because an integer #define that should have been declared as unsigned, was shifted to the point that it could set the sign bit. The fix just involves making sure the defines use the "U" identifier on the constants to make sure they're unsigned. Should make the checkers happier. Confirmed with objdump before/after that there is no change to the binaries. Issues were reported as follows: ./drivers/net/ethernet/intel/ice/ice_base.c:238:7: note: in expansion of macro 'FIELD_GET' (FIELD_GET(GLINT_CTL_ITR_GRAN_25_M, regval) == ICE_ITR_GRAN_US)) ^ ./include/linux/compiler_types.h:435:38: error: call to '__compiletime_assert_1093' declared with attribute error: FIELD_GET: mask is not constant drivers/net/ethernet/intel/ice/ice_nvm.c:709:16: note: in expansion of macro ‘FIELD_GET’ orom->major = FIELD_GET(ICE_OROM_VER_MASK, combo_ver); ^ ./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_796’ declared with attribute error: FIELD_GET: mask is not constant drivers/net/ethernet/intel/ice/ice_common.c:945:18: note: in expansion of macro ‘FIELD_GET’ u8 max_agg_bw = FIELD_GET(GL_PWR_MODE_CTL_CAR_MAX_BW_M, ^ ./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_420’ declared with attribute error: FIELD_GET: mask is not constant drivers/net/ethernet/intel/i40e/i40e_dcb.c:458:8: note: in expansion of macro ‘FIELD_GET’ oui = FIELD_GET(I40E_LLDP_TLV_OUI_MASK, ouisubtype); ^ Reported-by: Geert Uytterhoeven <[email protected]> Closes: https://lore.kernel.org/lkml/[email protected]/ #i40e #ice Fixes: 62589808d73b ("i40e: field get conversion") Fixes: 5a259f8e0baf ("ice: field get conversion") Signed-off-by: Jesse Brandeburg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-06ixgbe: Clarify the values of the returning statusJedrzej Jagielski1-4/+4
Converting s32 functions to regular int in the previous patch of the series caused triggering smatch warnings about missing error code. New smatch warnings: drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c:2884 ixgbe_get_lcd_t_x550em() warn: missing error code? 'status' drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c:3130 ixgbe_enter_lplu_t_x550em() warn: missing error code? 'status' Old smatch warnings: drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c:2890 ixgbe_get_lcd_t_x550em() warn: missing error code? 'status' Fix it by clearly stating returning error code as 0. Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.