aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2022-05-05ice: use min_t() to make code cleaner in ice_gnssWan Jiabing1-2/+1
Fix the following coccicheck warning: ./drivers/net/ethernet/intel/ice/ice_gnss.c:79:26-27: WARNING opportunity for min() Signed-off-by: Wan Jiabing <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-05-05igb: Convert kmap() to kmap_local_page()Alaa Mohamed1-2/+2
kmap() is being deprecated and these usages are all local to the thread so there is no reason kmap_local_page() can't be used. Replace kmap() calls with kmap_local_page(). Signed-off-by: Alaa Mohamed <[email protected]> Reviewed-by: Ira Weiny <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-05-05ixgbe: Fix module_param allow_unsupported_sfp typeJeff Daly1-2/+2
The module_param allow_unsupported_sfp should be a boolean to match the type in the ixgbe_hw struct. Signed-off-by: Jeff Daly <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-20/+15
include/linux/netdevice.h net/core/dev.c 6510ea973d8d ("net: Use this_cpu_inc() to increment net->core_stats") 794c24e9921f ("net-core: rx_otherhost_dropped to core_stats") https://lore.kernel.org/all/[email protected]/ drivers/net/wan/cosa.c d48fea8401cf ("net: cosa: fix error check return value of register_chrdev()") 89fbca3307d4 ("net: wan: remove support for COSA and SRP synchronous serial boards") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-28ixgbe: ensure IPsec VF<->PF compatibilityLeon Romanovsky1-1/+2
The VF driver can forward any IPsec flags and such makes the function is not extendable and prone to backward/forward incompatibility. If new software runs on VF, it won't know that PF configured something completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag. Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Reviewed-by: Raed Salem <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Shannon Nelson <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-27Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski6-56/+92
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-04-27 We've added 85 non-merge commits during the last 18 day(s) which contain a total of 163 files changed, 4499 insertions(+), 1521 deletions(-). The main changes are: 1) Teach libbpf to enhance BPF verifier log with human-readable and relevant information about failed CO-RE relocations, from Andrii Nakryiko. 2) Add typed pointer support in BPF maps and enable it for unreferenced pointers (via probe read) and referenced ones that can be passed to in-kernel helpers, from Kumar Kartikeya Dwivedi. 3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel. 4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced the effective prog array before the rcu_read_lock, from Stanislav Fomichev. 5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic for USDT arguments under riscv{32,64}, from Pu Lehui. 6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire. 7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage so it can be shipped under Alpine which is musl-based, from Dominique Martinet. 8) Clean up {sk,task,inode} local storage trace RCU handling as they do not need to use call_rcu_tasks_trace() barrier, from KP Singh. 9) Improve libbpf API documentation and fix error return handling of various API functions, from Grant Seltzer. 10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data length of frags + frag_list may surpass old offset limit, from Liu Jian. 11) Various improvements to prog_tests in area of logging, test execution and by-name subtest selection, from Mykola Lysenko. 12) Simplify map_btf_id generation for all map types by moving this process to build time with help of resolve_btfids infra, from Menglong Dong. 13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*() helpers; the probing caused always to use old helpers, from Runqing Yang. 14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS tracing macros, from Vladimir Isaev. 15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel switched to memcg-based memory accouting a while ago, from Yafang Shao. 16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu. 17) Fix BPF selftests in two occasions to work around regressions caused by latest LLVM to unblock CI until their fixes are worked out, from Yonghong Song. 18) Misc cleanups all over the place, from various others. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits) selftests/bpf: Add libbpf's log fixup logic selftests libbpf: Fix up verifier log for unguarded failed CO-RE relos libbpf: Simplify bpf_core_parse_spec() signature libbpf: Refactor CO-RE relo human description formatting routine libbpf: Record subprog-resolved CO-RE relocations unconditionally selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests libbpf: Avoid joining .BTF.ext data with BPF programs by section name libbpf: Fix logic for finding matching program for CO-RE relocation libbpf: Drop unhelpful "program too large" guess libbpf: Fix anonymous type check in CO-RE logic bpf: Compute map_btf_id during build time selftests/bpf: Add test for strict BTF type check selftests/bpf: Add verifier tests for kptr selftests/bpf: Add C tests for kptr libbpf: Add kptr type tag macros to bpf_helpers.h bpf: Make BTF type match stricter for release arguments bpf: Teach verifier about kptr_get kfunc helpers bpf: Wire up freeing of referenced kptr bpf: Populate pairs of btf_id and destructor kfunc in btf bpf: Adapt copy_map_value for multiple offset case ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-26ice: fix use-after-free when deinitializing mailbox snapshotJacob Keller1-1/+1
During ice_sriov_configure, if num_vfs is 0, we are being asked by the kernel to remove all VFs. The driver first de-initializes the snapshot before freeing all the VFs. This results in a use-after-free BUG detected by KASAN. The bug occurs because the snapshot can still be accessed until all VFs are removed. Fix this by freeing all the VFs first before calling ice_mbx_deinit_snapshot. [ +0.032591] ================================================================== [ +0.000021] BUG: KASAN: use-after-free in ice_mbx_vf_state_handler+0x1c3/0x410 [ice] [ +0.000315] Write of size 28 at addr ffff889908eb6f28 by task kworker/55:2/1530996 [ +0.000029] CPU: 55 PID: 1530996 Comm: kworker/55:2 Kdump: loaded Tainted: G S I 5.17.0-dirty #1 [ +0.000022] Hardware name: Dell Inc. PowerEdge R740/0923K0, BIOS 1.6.13 12/17/2018 [ +0.000013] Workqueue: ice ice_service_task [ice] [ +0.000279] Call Trace: [ +0.000012] <TASK> [ +0.000011] dump_stack_lvl+0x33/0x42 [ +0.000030] print_report.cold.13+0xb2/0x6b3 [ +0.000028] ? ice_mbx_vf_state_handler+0x1c3/0x410 [ice] [ +0.000295] kasan_report+0xa5/0x120 [ +0.000026] ? __switch_to_asm+0x21/0x70 [ +0.000024] ? ice_mbx_vf_state_handler+0x1c3/0x410 [ice] [ +0.000298] kasan_check_range+0x183/0x1e0 [ +0.000019] memset+0x1f/0x40 [ +0.000018] ice_mbx_vf_state_handler+0x1c3/0x410 [ice] [ +0.000304] ? ice_conv_link_speed_to_virtchnl+0x160/0x160 [ice] [ +0.000297] ? ice_vsi_dis_spoofchk+0x40/0x40 [ice] [ +0.000305] ice_is_malicious_vf+0x1aa/0x250 [ice] [ +0.000303] ? ice_restore_all_vfs_msi_state+0x160/0x160 [ice] [ +0.000297] ? __mutex_unlock_slowpath.isra.15+0x410/0x410 [ +0.000022] ? ice_debug_cq+0xb7/0x230 [ice] [ +0.000273] ? __kasan_slab_alloc+0x2f/0x90 [ +0.000022] ? memset+0x1f/0x40 [ +0.000017] ? do_raw_spin_lock+0x119/0x1d0 [ +0.000022] ? rwlock_bug.part.2+0x60/0x60 [ +0.000024] __ice_clean_ctrlq+0x3a6/0xd60 [ice] [ +0.000273] ? newidle_balance+0x5b1/0x700 [ +0.000026] ? ice_print_link_msg+0x2f0/0x2f0 [ice] [ +0.000271] ? update_cfs_group+0x1b/0x140 [ +0.000018] ? load_balance+0x1260/0x1260 [ +0.000022] ? ice_process_vflr_event+0x27/0x130 [ice] [ +0.000301] ice_service_task+0x136e/0x1470 [ice] [ +0.000281] process_one_work+0x3b4/0x6c0 [ +0.000030] worker_thread+0x65/0x660 [ +0.000023] ? __kthread_parkme+0xe4/0x100 [ +0.000021] ? process_one_work+0x6c0/0x6c0 [ +0.000020] kthread+0x179/0x1b0 [ +0.000018] ? kthread_complete_and_exit+0x20/0x20 [ +0.000022] ret_from_fork+0x22/0x30 [ +0.000026] </TASK> [ +0.000018] Allocated by task 10742: [ +0.000013] kasan_save_stack+0x1c/0x40 [ +0.000018] __kasan_kmalloc+0x84/0xa0 [ +0.000016] kmem_cache_alloc_trace+0x16c/0x2e0 [ +0.000015] intel_iommu_probe_device+0xeb/0x860 [ +0.000015] __iommu_probe_device+0x9a/0x2f0 [ +0.000016] iommu_probe_device+0x43/0x270 [ +0.000015] iommu_bus_notifier+0xa7/0xd0 [ +0.000015] blocking_notifier_call_chain+0x90/0xc0 [ +0.000017] device_add+0x5f3/0xd70 [ +0.000014] pci_device_add+0x404/0xa40 [ +0.000015] pci_iov_add_virtfn+0x3b0/0x550 [ +0.000016] sriov_enable+0x3bb/0x600 [ +0.000013] ice_ena_vfs+0x113/0xa79 [ice] [ +0.000293] ice_sriov_configure.cold.17+0x21/0xe0 [ice] [ +0.000291] sriov_numvfs_store+0x160/0x200 [ +0.000015] kernfs_fop_write_iter+0x1db/0x270 [ +0.000018] new_sync_write+0x21d/0x330 [ +0.000013] vfs_write+0x376/0x410 [ +0.000013] ksys_write+0xba/0x150 [ +0.000012] do_syscall_64+0x3a/0x80 [ +0.000012] entry_SYSCALL_64_after_hwframe+0x44/0xae [ +0.000028] Freed by task 10742: [ +0.000011] kasan_save_stack+0x1c/0x40 [ +0.000015] kasan_set_track+0x21/0x30 [ +0.000016] kasan_set_free_info+0x20/0x30 [ +0.000012] __kasan_slab_free+0x104/0x170 [ +0.000016] kfree+0x9b/0x470 [ +0.000013] devres_destroy+0x1c/0x20 [ +0.000015] devm_kfree+0x33/0x40 [ +0.000012] ice_mbx_deinit_snapshot+0x39/0x70 [ice] [ +0.000295] ice_sriov_configure+0xb0/0x260 [ice] [ +0.000295] sriov_numvfs_store+0x1bc/0x200 [ +0.000015] kernfs_fop_write_iter+0x1db/0x270 [ +0.000016] new_sync_write+0x21d/0x330 [ +0.000012] vfs_write+0x376/0x410 [ +0.000012] ksys_write+0xba/0x150 [ +0.000012] do_syscall_64+0x3a/0x80 [ +0.000012] entry_SYSCALL_64_after_hwframe+0x44/0xae [ +0.000024] Last potentially related work creation: [ +0.000010] kasan_save_stack+0x1c/0x40 [ +0.000016] __kasan_record_aux_stack+0x98/0xa0 [ +0.000013] insert_work+0x34/0x160 [ +0.000015] __queue_work+0x20e/0x650 [ +0.000016] queue_work_on+0x4c/0x60 [ +0.000015] nf_nat_masq_schedule+0x297/0x2e0 [nf_nat] [ +0.000034] masq_device_event+0x5a/0x60 [nf_nat] [ +0.000031] raw_notifier_call_chain+0x5f/0x80 [ +0.000017] dev_close_many+0x1d6/0x2c0 [ +0.000015] unregister_netdevice_many+0x4e3/0xa30 [ +0.000015] unregister_netdevice_queue+0x192/0x1d0 [ +0.000014] iavf_remove+0x8f9/0x930 [iavf] [ +0.000058] pci_device_remove+0x65/0x110 [ +0.000015] device_release_driver_internal+0xf8/0x190 [ +0.000017] pci_stop_bus_device+0xb5/0xf0 [ +0.000014] pci_stop_and_remove_bus_device+0xe/0x20 [ +0.000016] pci_iov_remove_virtfn+0x19c/0x230 [ +0.000015] sriov_disable+0x4f/0x170 [ +0.000014] ice_free_vfs+0x9a/0x490 [ice] [ +0.000306] ice_sriov_configure+0xb8/0x260 [ice] [ +0.000294] sriov_numvfs_store+0x1bc/0x200 [ +0.000015] kernfs_fop_write_iter+0x1db/0x270 [ +0.000016] new_sync_write+0x21d/0x330 [ +0.000012] vfs_write+0x376/0x410 [ +0.000012] ksys_write+0xba/0x150 [ +0.000012] do_syscall_64+0x3a/0x80 [ +0.000012] entry_SYSCALL_64_after_hwframe+0x44/0xae [ +0.000025] The buggy address belongs to the object at ffff889908eb6f00 which belongs to the cache kmalloc-96 of size 96 [ +0.000016] The buggy address is located 40 bytes inside of 96-byte region [ffff889908eb6f00, ffff889908eb6f60) [ +0.000026] The buggy address belongs to the physical page: [ +0.000010] page:00000000b7e99a2e refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1908eb6 [ +0.000016] flags: 0x57ffffc0000200(slab|node=1|zone=2|lastcpupid=0x1fffff) [ +0.000024] raw: 0057ffffc0000200 ffffea0069d9fd80 dead000000000002 ffff88810004c780 [ +0.000015] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ +0.000009] page dumped because: kasan: bad access detected [ +0.000016] Memory state around the buggy address: [ +0.000012] ffff889908eb6e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ +0.000014] ffff889908eb6e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ +0.000014] >ffff889908eb6f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ +0.000011] ^ [ +0.000013] ffff889908eb6f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ +0.000013] ffff889908eb7000: fa fb fb fb fb fb fb fb fc fc fc fc fa fb fb fb [ +0.000012] ================================================================== Fixes: 0891c89674e8 ("ice: warn about potentially malicious VFs") Reported-by: Slawomir Laba <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-26ice: wait 5 s for EMP reset after firmware flashPetr Oros1-0/+3
We need to wait 5 s for EMP reset after firmware flash. Code was extracted from OOT driver (ice v1.8.3 downloaded from sourceforge). Without this wait, fw_activate let card in inconsistent state and recoverable only by second flash/activate. Flash was tested on these fw's: From -> To 3.00 -> 3.10/3.20 3.10 -> 3.00/3.20 3.20 -> 3.00/3.10 Reproducer: [root@host ~]# devlink dev flash pci/0000:ca:00.0 file E810_XXVDA4_FH_O_SEC_FW_1p6p1p9_NVM_3p10_PLDMoMCTP_0.11_8000AD7B.bin Preparing to flash [fw.mgmt] Erasing [fw.mgmt] Erasing done [fw.mgmt] Flashing 100% [fw.mgmt] Flashing done 100% [fw.undi] Erasing [fw.undi] Erasing done [fw.undi] Flashing 100% [fw.undi] Flashing done 100% [fw.netlist] Erasing [fw.netlist] Erasing done [fw.netlist] Flashing 100% [fw.netlist] Flashing done 100% Activate new firmware by devlink reload [root@host ~]# devlink dev reload pci/0000:ca:00.0 action fw_activate reload_actions_performed: fw_activate [root@host ~]# ip link show ens7f0 71: ens7f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000 link/ether b4:96:91:dc:72:e0 brd ff:ff:ff:ff:ff:ff altname enp202s0f0 dmesg after flash: [ 55.120788] ice: Copyright (c) 2018, Intel Corporation. [ 55.274734] ice 0000:ca:00.0: Get PHY capabilities failed status = -5, continuing anyway [ 55.569797] ice 0000:ca:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.28.0 [ 55.603629] ice 0000:ca:00.0: Get PHY capability failed. [ 55.608951] ice 0000:ca:00.0: ice_init_nvm_phy_type failed: -5 [ 55.647348] ice 0000:ca:00.0: PTP init successful [ 55.675536] ice 0000:ca:00.0: DCB is enabled in the hardware, max number of TCs supported on this port are 8 [ 55.685365] ice 0000:ca:00.0: FW LLDP is disabled, DCBx/LLDP in SW mode. [ 55.692179] ice 0000:ca:00.0: Commit DCB Configuration to the hardware [ 55.701382] ice 0000:ca:00.0: 126.024 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x8 link at 0000:c9:02.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) Reboot doesn’t help, only second flash/activate with OOT or patched driver put card back in consistent state. After patch: [root@host ~]# devlink dev flash pci/0000:ca:00.0 file E810_XXVDA4_FH_O_SEC_FW_1p6p1p9_NVM_3p10_PLDMoMCTP_0.11_8000AD7B.bin Preparing to flash [fw.mgmt] Erasing [fw.mgmt] Erasing done [fw.mgmt] Flashing 100% [fw.mgmt] Flashing done 100% [fw.undi] Erasing [fw.undi] Erasing done [fw.undi] Flashing 100% [fw.undi] Flashing done 100% [fw.netlist] Erasing [fw.netlist] Erasing done [fw.netlist] Flashing 100% [fw.netlist] Flashing done 100% Activate new firmware by devlink reload [root@host ~]# devlink dev reload pci/0000:ca:00.0 action fw_activate reload_actions_performed: fw_activate [root@host ~]# ip link show ens7f0 19: ens7f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether b4:96:91:dc:72:e0 brd ff:ff:ff:ff:ff:ff altname enp202s0f0 Fixes: 399e27dbbd9e94 ("ice: support immediate firmware activation via devlink reload") Signed-off-by: Petr Oros <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-04-26ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg()Ivan Vecera1-7/+5
Previous patch labelled "ice: Fix incorrect locking in ice_vc_process_vf_msg()" fixed an issue with ignored messages sent by VF driver but a small race window still left. Recently caught trace during 'ip link set ... vf 0 vlan ...' operation: [ 7332.995625] ice 0000:3b:00.0: Clearing port VLAN on VF 0 [ 7333.001023] iavf 0000:3b:01.0: Reset indication received from the PF [ 7333.007391] iavf 0000:3b:01.0: Scheduling reset task [ 7333.059575] iavf 0000:3b:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 3 [ 7333.059626] ice 0000:3b:00.0: Invalid message from VF 0, opcode 3, len 4, error -1 Setting of VLAN for VF causes a reset of the affected VF using ice_reset_vf() function that runs with cfg_lock taken: 1. ice_notify_vf_reset() informs IAVF driver that reset is needed and IAVF schedules its own reset procedure 2. Bit ICE_VF_STATE_DIS is set in vf->vf_state 3. Misc initialization steps 4. ice_sriov_post_vsi_rebuild() -> ice_vf_set_initialized() and that clears ICE_VF_STATE_DIS in vf->vf_state Step 3 is mentioned race window because IAVF reset procedure runs in parallel and one of its step is sending of VIRTCHNL_OP_GET_VF_RESOURCES message (opcode==3). This message is handled in ice_vc_process_vf_msg() and if it is received during the mentioned race window then it's marked as invalid and error is returned to VF driver. Protect vf_state check in ice_vc_process_vf_msg() by cfg_lock to avoid this race condition. Fixes: e6ba5273d4ed ("ice: Fix race conditions between virtchnl handling and VF ndo ops") Tested-by: Fei Liu <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-26ice: Fix incorrect locking in ice_vc_process_vf_msg()Ivan Vecera1-14/+7
Usage of mutex_trylock() in ice_vc_process_vf_msg() is incorrect because message sent from VF is ignored and never processed. Use mutex_lock() instead to fix the issue. It is safe because this mutex is used to prevent races between VF related NDOs and handlers processing request messages from VF and these handlers are running in ice_service_task() context. Additionally move this mutex lock prior ice_vc_is_opcode_allowed() call to avoid potential races during allowlist access. Fixes: e6ba5273d4ed ("ice: Fix race conditions between virtchnl handling and VF ndo ops") Signed-off-by: Ivan Vecera <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni8-10/+37
drivers/net/ethernet/microchip/lan966x/lan966x_main.c d08ed852560e ("net: lan966x: Make sure to release ptp interrupt") c8349639324a ("net: lan966x: Add FDMA functionality") Signed-off-by: Paolo Abeni <[email protected]>
2022-04-21i40e, xsk: Get rid of redundant 'fallthrough'Maciej Fijalkowski1-1/+0
Intel drivers translate actions returned from XDP programs to their own return codes that have the following mapping: XDP_REDIRECT -> I40E_XDP_{REDIR,CONSUMED} XDP_TX -> I40E_XDP_{TX,CONSUMED} XDP_DROP -> I40E_XDP_CONSUMED XDP_ABORTED -> I40E_XDP_CONSUMED XDP_PASS -> I40E_XDP_PASS Commit b8aef650e549 ("i40e, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") introduced new translation XDP_REDIRECT -> I40E_XDP_EXIT which is set when XSK RQ gets full and to indicate that driver should stop further Rx processing. This happens for unsuccessful xdp_do_redirect() so it is valuable to call trace_xdp_exception() for this case. In order to avoid I40E_XDP_EXIT -> IXGBE_XDP_CONSUMED overwrite, XDP_DROP case was moved above which in turn made the 'fallthrough' that is in XDP_ABORTED useless as it became the last label in the switch statement. Simply drop this leftover. Fixes: b8aef650e549 ("i40e, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") Signed-off-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-21ixgbe, xsk: Get rid of redundant 'fallthrough'Maciej Fijalkowski1-1/+0
Intel drivers translate actions returned from XDP programs to their own return codes that have the following mapping: XDP_REDIRECT -> IXGBE_XDP_{REDIR,CONSUMED} XDP_TX -> IXGBE_XDP_{TX,CONSUMED} XDP_DROP -> IXGBE_XDP_CONSUMED XDP_ABORTED -> IXGBE_XDP_CONSUMED XDP_PASS -> IXGBE_XDP_PASS Commit c7dd09fd4628 ("ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") introduced new translation XDP_REDIRECT -> IXGBE_XDP_EXIT which is set when XSK RQ gets full and to indicate that driver should stop further Rx processing. This happens for unsuccessful xdp_do_redirect() so it is valuable to call trace_xdp_exception() for this case. In order to avoid IXGBE_XDP_EXIT -> IXGBE_XDP_CONSUMED overwrite, XDP_DROP case was moved above which in turn made the 'fallthrough' that is in XDP_ABORTED useless as it became the last label in the switch statement. Simply drop this leftover. Fixes: c7dd09fd4628 ("ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") Signed-off-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-15Merge branch '1GbE' of ↵Jakub Kicinski4-7/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-04-13 This series contains updates to igc and e1000e drivers. Sasha removes waiting for hardware semaphore as it could cause an infinite loop and changes usleep_range() calls done under atomic context to udelay() for igc. For e1000e, he changes some variables from u16 to u32 to prevent possible overflow of values. Vinicius disables PTM when going to suspend as it is causing hang issues on some platforms for igc. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: Fix possible overflow in LTR decoding igc: Fix suspending when PTM is active igc: Fix BUG: scheduling while atomic igc: Fix infinite loop in release_swfw_sync ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-15ice, xsk: Avoid refilling single Rx descriptorsMaciej Fijalkowski1-1/+4
Call alloc Rx routine for ZC driver only when the amount of unallocated descriptors exceeds given threshold. Signed-off-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-15ixgbe, xsk: Diversify return values from xsk_wakeup call pathsMaciej Fijalkowski1-3/+3
Currently, when debugging AF_XDP workloads, one can correlate the -ENXIO return code as the case that XSK is not in the bound state. Returning same code from ndo_xsk_wakeup can be misleading and simply makes it harder to follow what is going on. Change ENXIOs in ixgbe's ndo_xsk_wakeup() implementation to EINVALs, so that when probing it is clear that something is wrong on the driver side, not the xsk_{recv,send}msg. There is a -ENETDOWN that can happen from both kernel/driver sides though, but I don't have a correct replacement for this on one of the sides, so let's keep it that way. Signed-off-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-15i40e, xsk: Diversify return values from xsk_wakeup call pathsMaciej Fijalkowski1-3/+3
Currently, when debugging AF_XDP workloads, one can correlate the -ENXIO return code as the case that XSK is not in the bound state. Returning same code from ndo_xsk_wakeup can be misleading and simply makes it harder to follow what is going on. Change ENXIOs in i40e's ndo_xsk_wakeup() implementation to EINVALs, so that when probing it is clear that something is wrong on the driver side, not the xsk_{recv,send}msg. There is a -ENETDOWN that can happen from both kernel/driver sides though, but I don't have a correct replacement for this on one of the sides, so let's keep it that way. Signed-off-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-15ice, xsk: Diversify return values from xsk_wakeup call pathsMaciej Fijalkowski1-3/+3
Currently, when debugging AF_XDP workloads, one can correlate the -ENXIO return code as the case that XSK is not in the bound state. Returning same code from ndo_xsk_wakeup can be misleading and simply makes it harder to follow what is going on. Change ENXIOs in ice's ndo_xsk_wakeup() implementation to EINVALs, so that when probing it is clear that something is wrong on the driver side, not the xsk_{recv,send}msg. There is a -ENETDOWN that can happen from both kernel/driver sides though, but I don't have a correct replacement for this on one of the sides, so let's keep it that way. Signed-off-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-15ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx queue gets fullMaciej Fijalkowski2-9/+19
When XSK pool uses need_wakeup feature, correlate -ENOBUFS that was returned from xdp_do_redirect() with a XSK Rx queue being full. In such case, terminate the Rx processing that is being done on the current HW Rx ring and let the user space consume descriptors from XSK Rx queue so that there is room that driver can use later on. Introduce new internal return code IXGBE_XDP_EXIT that will indicate case described above. Note that it does not affect Tx processing that is bound to the same NAPI context, nor the other Rx rings. Signed-off-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-15i40e, xsk: Terminate Rx side of NAPI when XSK Rx queue gets fullMaciej Fijalkowski2-10/+23
When XSK pool uses need_wakeup feature, correlate -ENOBUFS that was returned from xdp_do_redirect() with a XSK Rx queue being full. In such case, terminate the Rx processing that is being done on the current HW Rx ring and let the user space consume descriptors from XSK Rx queue so that there is room that driver can use later on. Introduce new internal return code I40E_XDP_EXIT that will indicate case described above. Note that it does not affect Tx processing that is bound to the same NAPI context, nor the other Rx rings. Signed-off-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-15ice, xsk: Terminate Rx side of NAPI when XSK Rx queue gets fullMaciej Fijalkowski2-10/+20
When XSK pool uses need_wakeup feature, correlate -ENOBUFS that was returned from xdp_do_redirect() with a XSK Rx queue being full. In such case, terminate the Rx processing that is being done on the current HW Rx ring and let the user space consume descriptors from XSK Rx queue so that there is room that driver can use later on. Introduce new internal return code ICE_XDP_EXIT that will indicate case described above. Note that it does not affect Tx processing that is bound to the same NAPI context, nor the other Rx rings. Signed-off-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-15ixgbe, xsk: Decorate IXGBE_XDP_REDIR with likely()Maciej Fijalkowski1-12/+13
ixgbe_run_xdp_zc() suggests to compiler that XDP_REDIRECT is the most probable action returned from BPF program that AF_XDP has in its pipeline. Let's also bring this suggestion up to the callsite of ixgbe_run_xdp_zc() so that compiler will be able to generate more optimized code which in turn will make branch predictor happy. Suggested-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-15ice, xsk: Decorate ICE_XDP_REDIR with likely()Maciej Fijalkowski1-10/+11
ice_run_xdp_zc() suggests to compiler that XDP_REDIRECT is the most probable action returned from BPF program that AF_XDP has in its pipeline. Let's also bring this suggestion up to the callsite of ice_run_xdp_zc() so that compiler will be able to generate more optimized code which in turn will make branch predictor happy. Suggested-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni4-23/+16
2022-04-14ice: Fix memory leak in ice_get_orom_civd_data()Jianglei Nie1-0/+1
A memory chunk was allocated for orom_data in ice_get_orom_civd_data() by vzmalloc(). But when ice_read_flash_module() fails, the allocated memory is not freed, which will lead to a memory leak. We can fix it by freeing the orom_data when ce_read_flash_module() fails. Fixes: af18d8866c80 ("ice: reduce time to read Option ROM CIVD data") Signed-off-by: Jianglei Nie <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-04-14ice: fix crash in switchdev modeWojciech Drewek1-1/+2
Below steps end up with crash: - modprobe ice - devlink dev eswitch set $PF1_PCI mode switchdev - echo 64 > /sys/class/net/$PF1/device/sriov_numvfs - rmmod ice Calling ice_eswitch_port_start_xmit while the process of removing VFs is in progress ends up with NULL pointer dereference. That's because PR netdev is not released but some resources are already freed. Fix it by checking if ICE_VF_DIS bit is set. Call trace: [ 1379.595146] BUG: kernel NULL pointer dereference, address: 0000000000000040 [ 1379.595284] #PF: supervisor read access in kernel mode [ 1379.595410] #PF: error_code(0x0000) - not-present page [ 1379.595535] PGD 0 P4D 0 [ 1379.595657] Oops: 0000 [#1] PREEMPT SMP PTI [ 1379.595783] CPU: 4 PID: 974 Comm: NetworkManager Kdump: loaded Tainted: G OE 5.17.0-rc8_mrq_dev-queue+ #12 [ 1379.595926] Hardware name: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.03.01.0042.013020190050 01/30/2019 [ 1379.596063] RIP: 0010:ice_eswitch_port_start_xmit+0x46/0xd0 [ice] [ 1379.596292] Code: c7 c8 09 00 00 e8 9a c9 fc ff 84 c0 0f 85 82 00 00 00 4c 89 e7 e8 ca 70 fe ff 48 8b 7d 58 48 89 c3 48 85 ff 75 5e 48 8b 53 20 <8b> 42 40 85 c0 74 78 8d 48 01 f0 0f b1 4a 40 75 f2 0f b6 95 84 00 [ 1379.596456] RSP: 0018:ffffaba0c0d7bad0 EFLAGS: 00010246 [ 1379.596584] RAX: ffff969c14c71680 RBX: ffff969c14c71680 RCX: 000100107a0f0000 [ 1379.596715] RDX: 0000000000000000 RSI: ffff969b9d631000 RDI: 0000000000000000 [ 1379.596846] RBP: ffff969c07b46500 R08: ffff969becfca8ac R09: 0000000000000001 [ 1379.596977] R10: 0000000000000004 R11: ffffaba0c0d7bbec R12: ffff969b9d631000 [ 1379.597106] R13: ffffffffc08357a0 R14: ffff969c07b46500 R15: ffff969b9d631000 [ 1379.597237] FS: 00007f72c0e25c80(0000) GS:ffff969f13500000(0000) knlGS:0000000000000000 [ 1379.597414] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1379.597562] CR2: 0000000000000040 CR3: 000000012b316006 CR4: 00000000003706e0 [ 1379.597713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1379.597863] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1379.598015] Call Trace: [ 1379.598153] <TASK> [ 1379.598294] dev_hard_start_xmit+0xd9/0x220 [ 1379.598444] sch_direct_xmit+0x8a/0x340 [ 1379.598592] __dev_queue_xmit+0xa3c/0xd30 [ 1379.598739] ? packet_parse_headers+0xb4/0xf0 [ 1379.598890] packet_sendmsg+0xa15/0x1620 [ 1379.599038] ? __check_object_size+0x46/0x140 [ 1379.599186] sock_sendmsg+0x5e/0x60 [ 1379.599330] ____sys_sendmsg+0x22c/0x270 [ 1379.599474] ? import_iovec+0x17/0x20 [ 1379.599622] ? sendmsg_copy_msghdr+0x59/0x90 [ 1379.599771] ___sys_sendmsg+0x81/0xc0 [ 1379.599917] ? __pollwait+0xd0/0xd0 [ 1379.600061] ? preempt_count_add+0x68/0xa0 [ 1379.600210] ? _raw_write_lock_irq+0x1a/0x40 [ 1379.600369] ? ep_done_scan+0xc9/0x110 [ 1379.600494] ? _raw_spin_unlock_irqrestore+0x25/0x40 [ 1379.600622] ? preempt_count_add+0x68/0xa0 [ 1379.600747] ? _raw_spin_lock_irq+0x1a/0x40 [ 1379.600899] ? __fget_light+0x8f/0x110 [ 1379.601024] __sys_sendmsg+0x49/0x80 [ 1379.601148] ? release_ds_buffers+0x50/0xe0 [ 1379.601274] do_syscall_64+0x3b/0x90 [ 1379.601399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 1379.601525] RIP: 0033:0x7f72c1e2e35d Fixes: f5396b8a663f ("ice: switchdev slow path") Signed-off-by: Wojciech Drewek <[email protected]> Reported-by: Marcin Szycik <[email protected]> Reviewed-by: Michal Swiatkowski <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-14ice: allow creating VFs for !CONFIG_NET_SWITCHDEVMaciej Fijalkowski1-1/+1
Currently for !CONFIG_NET_SWITCHDEV kernel builds it is not possible to create VFs properly as call to ice_eswitch_configure() returns -EOPNOTSUPP for us. This is because CONFIG_ICE_SWITCHDEV depends on CONFIG_NET_SWITCHDEV. Change the ice_eswitch_configure() implementation for !CONFIG_ICE_SWITCHDEV to return 0 instead -EOPNOTSUPP and let ice_ena_vfs() finish its work properly. CC: Grzegorz Nitka <[email protected]> Fixes: 1a1c40df2e80 ("ice: set and release switchdev environment") Signed-off-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Michal Swiatkowski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-14ice: xsk: check if Rx ring was filled up to the endMaciej Fijalkowski1-1/+6
__ice_alloc_rx_bufs_zc() checks if a number of the descriptors to be allocated would cause the ring wrap. In that case, driver will issue two calls to xsk_buff_alloc_batch() - one that will fill the ring up to the end and the second one that will start with filling descriptors from the beginning of the ring. ice_fill_rx_descs() is a wrapper for taking care of what xsk_buff_alloc_batch() gave back to the driver. It works in a best effort approach, so for example when driver asks for 64 buffers, ice_fill_rx_descs() could assign only 32. Such case needs to be checked when ring is being filled up to the end, because in that situation ntu might not reached the end of the ring. Fix the ring wrap by checking if nb_buffs_extra has the expected value. If not, bump ntu and go directly to tail update. Fixes: 3876ff525de7 ("ice: xsk: Handle SW XDP ring wrap and bump tail more often") Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Shwetha Nagaraju <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-13e1000e: Fix possible overflow in LTR decodingSasha Neftin1-2/+2
When we decode the latency and the max_latency, u16 value may not fit the required size and could lead to the wrong LTR representation. Scaling is represented as: scale 0 - 1 (2^(5*0)) = 2^0 scale 1 - 32 (2^(5 *1))= 2^5 scale 2 - 1024 (2^(5 *2)) =2^10 scale 3 - 32768 (2^(5 *3)) =2^15 scale 4 - 1048576 (2^(5 *4)) = 2^20 scale 5 - 33554432 (2^(5 *4)) = 2^25 scale 4 and scale 5 required 20 and 25 bits respectively. scale 6 reserved. Replace the u16 type with the u32 type and allow corrected LTR representation. Cc: [email protected] Fixes: 44a13a5d99c7 ("e1000e: Fix the max snoop/no-snoop latency for 10M") Reported-by: James Hutchinson <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215689 Suggested-by: Dima Ruinskiy <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Tested-by: James Hutchinson <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-13igc: Fix suspending when PTM is activeVinicius Costa Gomes1-1/+14
Some mainboard/CPU combinations, in particular, Alder Lake-S with a W680 mainboard, have shown problems (system hangs usually, no kernel logs) with suspend/resume when PCIe PTM is enabled and active. In some cases, it could be reproduced when removing the igc module. The best we can do is to stop PTM dialogs from the downstream/device side before the interface is brought down. PCIe PTM will be re-enabled when the interface is being brought up. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Signed-off-by: Vinicius Costa Gomes <[email protected]> Tested-by: Naama Meir <[email protected]> Acked-by: Paul Menzel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-13igc: Fix BUG: scheduling while atomicSasha Neftin1-2/+2
Replace usleep_range() method with udelay() method to allow atomic contexts in low-level MDIO access functions. The following issue can be seen by doing the following: $ modprobe -r bonding $ modprobe -v bonding max_bonds=1 mode=1 miimon=100 use_carrier=0 $ ip link set bond0 up $ ifenslave bond0 eth0 eth1 [ 982.357308] BUG: scheduling while atomic: kworker/u64:0/9/0x00000002 [ 982.364431] INFO: lockdep is turned off. [ 982.368824] Modules linked in: bonding sctp ip6_udp_tunnel udp_tunnel mlx4_ib ib_uverbs ib_core mlx4_en mlx4_core nfp tls sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support mxm_wmi dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate intel_uncore pcspkr lpc_ich mei_me ipmi_ssif mei ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci crc32c_intel libata i2c_algo_bit tg3 megaraid_sas igc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: bonding] [ 982.437941] CPU: 25 PID: 9 Comm: kworker/u64:0 Kdump: loaded Tainted: G W --------- - - 4.18.0-348.el8.x86_64+debug #1 [ 982.451333] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 2.7.0 12/005/2017 [ 982.459791] Workqueue: bond0 bond_mii_monitor [bonding] [ 982.465622] Call Trace: [ 982.468355] dump_stack+0x8e/0xd0 [ 982.472056] __schedule_bug.cold.60+0x3a/0x60 [ 982.476919] __schedule+0x147b/0x1bc0 [ 982.481007] ? firmware_map_remove+0x16b/0x16b [ 982.485967] ? hrtimer_fixup_init+0x40/0x40 [ 982.490625] schedule+0xd9/0x250 [ 982.494227] schedule_hrtimeout_range_clock+0x10d/0x2c0 [ 982.500058] ? hrtimer_nanosleep_restart+0x130/0x130 [ 982.505598] ? hrtimer_init_sleeper_on_stack+0x90/0x90 [ 982.511332] ? usleep_range+0x88/0x130 [ 982.515514] ? recalibrate_cpu_khz+0x10/0x10 [ 982.520279] ? ktime_get+0xab/0x1c0 [ 982.524175] ? usleep_range+0x88/0x130 [ 982.528355] usleep_range+0xdd/0x130 [ 982.532344] ? console_conditional_schedule+0x30/0x30 [ 982.537987] ? igc_put_hw_semaphore+0x17/0x60 [igc] [ 982.543432] igc_read_phy_reg_gpy+0x111/0x2b0 [igc] [ 982.548887] igc_phy_has_link+0xfa/0x260 [igc] [ 982.553847] ? igc_get_phy_id+0x210/0x210 [igc] [ 982.558894] ? lock_acquire+0x34d/0x890 [ 982.563187] ? lock_downgrade+0x710/0x710 [ 982.567659] ? rcu_read_unlock+0x50/0x50 [ 982.572039] igc_check_for_copper_link+0x106/0x210 [igc] [ 982.577970] ? igc_config_fc_after_link_up+0x840/0x840 [igc] [ 982.584286] ? rcu_read_unlock+0x50/0x50 [ 982.588661] ? lock_release+0x591/0xb80 [ 982.592939] ? lock_release+0x591/0xb80 [ 982.597220] igc_has_link+0x113/0x330 [igc] [ 982.601887] ? lock_downgrade+0x710/0x710 [ 982.606362] igc_ethtool_get_link+0x6d/0x90 [igc] [ 982.611614] bond_check_dev_link+0x131/0x2c0 [bonding] [ 982.617350] ? bond_time_in_interval+0xd0/0xd0 [bonding] [ 982.623277] ? rcu_read_lock_held+0x62/0xc0 [ 982.627944] ? rcu_read_lock_sched_held+0xe0/0xe0 [ 982.633198] bond_mii_monitor+0x314/0x2500 [bonding] [ 982.638738] ? lock_contended+0x880/0x880 [ 982.643214] ? bond_miimon_link_change+0xa0/0xa0 [bonding] [ 982.649336] ? lock_acquire+0x34d/0x890 [ 982.653615] ? lock_downgrade+0x710/0x710 [ 982.658089] ? debug_object_deactivate+0x221/0x340 [ 982.663436] ? rcu_read_unlock+0x50/0x50 [ 982.667811] ? debug_print_object+0x2b0/0x2b0 [ 982.672672] ? __switch_to_asm+0x41/0x70 [ 982.677049] ? __switch_to_asm+0x35/0x70 [ 982.681426] ? _raw_spin_unlock_irq+0x24/0x40 [ 982.686288] ? trace_hardirqs_on+0x20/0x195 [ 982.690956] ? _raw_spin_unlock_irq+0x24/0x40 [ 982.695818] process_one_work+0x8f0/0x1770 [ 982.700390] ? pwq_dec_nr_in_flight+0x320/0x320 [ 982.705443] ? debug_show_held_locks+0x50/0x50 [ 982.710403] worker_thread+0x87/0xb40 [ 982.714489] ? process_one_work+0x1770/0x1770 [ 982.719349] kthread+0x344/0x410 [ 982.722950] ? kthread_insert_work_sanity_check+0xd0/0xd0 [ 982.728975] ret_from_fork+0x3a/0x50 Fixes: 5586838fe9ce ("igc: Add code for PHY support") Reported-by: Corinna Vinschen <[email protected]> Suggested-by: Dima Ruinskiy <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Corinna Vinschen <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-13igc: Fix infinite loop in release_swfw_syncSasha Neftin1-2/+9
An infinite loop may occur if we fail to acquire the HW semaphore, which is needed for resource release. This will typically happen if the hardware is surprise-removed. At this stage there is nothing to do, except log an error and quit. Fixes: c0071c7aa5fe ("igc: Add HW initialization code") Suggested-by: Dima Ruinskiy <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-12i40e: Add Ethernet Connection X722 for 10GbE SFP+ supportMateusz Palczewski3-0/+3
Add support for Ethernet Connection X722 for 10GbE SFP+ cards. Make possible for the driver to bind to the card. Signed-off-by: Przemyslaw Patynowski <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-04-12i40e: Add vsi.tx_restart to i40e ethtool statsNabil S. Alramli1-0/+1
Add vsi.tx_restart to the i40e driver ethtool statistics Signed-off-by: Nabil S. Alramli <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-04-12i40e: Add tx_stopped statJoe Damato6-2/+12
Track TX queue stop events and export the new stat with ethtool. Signed-off-by: Joe Damato <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-04-12ice: Add mpls+tso supportJoe Damato2-9/+24
Attempt to add mpls+tso support. I don't have ice hardware available to test myself, but I just implemented this feature in i40e and thought it might be useful to implement for ice while this is fresh in my brain. Hoping some one at intel will be able to test this on my behalf. Signed-off-by: Joe Damato <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-04-12i40e: Add support for MPLS + TSOJoe Damato2-19/+48
This change adds support for TSO of MPLS packets. In my tests with tcpdump it seems to work. Note this test setup has a 9000 byte MTU: MPLS (label 100, exp 0, [S], ttl 64) IP srcip.50086 > dstip.1234: Flags [P.], seq 593345:644401, ack 0, win 420, options [nop,nop,TS val 45022534 ecr 1722291395], length 51056 IP dstip.1234 > srcip.50086: Flags [.], ack 593345, win 122, options [nop,nop,TS val 1722291395 ecr 45022534], length 0 IP dstip.1234 > srcip.50086: Flags [.], ack 602289, win 105, options [nop,nop,TS val 1722291395 ecr 45022534], length 0 IP dstip.1234 > srcip.50086: Flags [.], ack 620177, win 71, options [nop,nop,TS val 1722291395 ecr 45022534], length 0 MPLS (label 100, exp 0, [S], ttl 64) IP srcip.50086 > dstip.1234: Flags [P.], seq 644401:655953, ack 0, win 420, options [nop,nop,TS val 45022534 ecr 1722291395], length 11552 IP dstip.1234 > srcip.50086: Flags [.], ack 638065, win 37, options [nop,nop,TS val 1722291395 ecr 45022534], length 0 IP dstip.1234 > srcip.50086: Flags [.], ack 644401, win 25, options [nop,nop,TS val 1722291395 ecr 45022534], length 0 IP dstip.1234 > srcip.50086: Flags [.], ack 653345, win 8, options [nop,nop,TS val 1722291395 ecr 45022534], length 0 IP dstip.1234 > srcip.50086: Flags [.], ack 655953, win 3, options [nop,nop,TS val 1722291395 ecr 45022534], length 0 Signed-off-by: Joe Damato <[email protected]> Co-developed-by: Mike Gallo <[email protected]> Signed-off-by: Mike Gallo <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-04-08Revert "iavf: Fix deadlock occurrence during resetting VF interface"Mateusz Palczewski1-5/+2
This change caused a regression with resetting while changing network namespaces. By clearing the IFF_UP flag, the kernel now thinks it has fully closed the device. This reverts commit 0cc318d2e8408bc0ffb4662a0c3e5e57005ac6ff. Fixes: 0cc318d2e840 ("iavf: Fix deadlock occurrence during resetting VF interface") Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-08ice: arfs: fix use-after-free when freeing @rx_cpu_rmapAlexander Lobakin3-18/+14
The CI testing bots triggered the following splat: [ 718.203054] BUG: KASAN: use-after-free in free_irq_cpu_rmap+0x53/0x80 [ 718.206349] Read of size 4 at addr ffff8881bd127e00 by task sh/20834 [ 718.212852] CPU: 28 PID: 20834 Comm: sh Kdump: loaded Tainted: G S W IOE 5.17.0-rc8_nextqueue-devqueue-02643-g23f3121aca93 #1 [ 718.219695] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0012.070720200218 07/07/2020 [ 718.223418] Call Trace: [ 718.227139] [ 718.230783] dump_stack_lvl+0x33/0x42 [ 718.234431] print_address_description.constprop.9+0x21/0x170 [ 718.238177] ? free_irq_cpu_rmap+0x53/0x80 [ 718.241885] ? free_irq_cpu_rmap+0x53/0x80 [ 718.245539] kasan_report.cold.18+0x7f/0x11b [ 718.249197] ? free_irq_cpu_rmap+0x53/0x80 [ 718.252852] free_irq_cpu_rmap+0x53/0x80 [ 718.256471] ice_free_cpu_rx_rmap.part.11+0x37/0x50 [ice] [ 718.260174] ice_remove_arfs+0x5f/0x70 [ice] [ 718.263810] ice_rebuild_arfs+0x3b/0x70 [ice] [ 718.267419] ice_rebuild+0x39c/0xb60 [ice] [ 718.270974] ? asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 718.274472] ? ice_init_phy_user_cfg+0x360/0x360 [ice] [ 718.278033] ? delay_tsc+0x4a/0xb0 [ 718.281513] ? preempt_count_sub+0x14/0xc0 [ 718.284984] ? delay_tsc+0x8f/0xb0 [ 718.288463] ice_do_reset+0x92/0xf0 [ice] [ 718.292014] ice_pci_err_resume+0x91/0xf0 [ice] [ 718.295561] pci_reset_function+0x53/0x80 <...> [ 718.393035] Allocated by task 690: [ 718.433497] Freed by task 20834: [ 718.495688] Last potentially related work creation: [ 718.568966] The buggy address belongs to the object at ffff8881bd127e00 which belongs to the cache kmalloc-96 of size 96 [ 718.574085] The buggy address is located 0 bytes inside of 96-byte region [ffff8881bd127e00, ffff8881bd127e60) [ 718.579265] The buggy address belongs to the page: [ 718.598905] Memory state around the buggy address: [ 718.601809] ffff8881bd127d00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 718.604796] ffff8881bd127d80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc [ 718.607794] >ffff8881bd127e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 718.610811] ^ [ 718.613819] ffff8881bd127e80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc [ 718.617107] ffff8881bd127f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc This is due to that free_irq_cpu_rmap() is always being called *after* (devm_)free_irq() and thus it tries to work with IRQ descs already freed. For example, on device reset the driver frees the rmap right before allocating a new one (the splat above). Make rmap creation and freeing function symmetrical with {request,free}_irq() calls i.e. do that on ifup/ifdown instead of device probe/remove/resume. These operations can be performed independently from the actual device aRFS configuration. Also, make sure ice_vsi_free_irq() clears IRQ affinity notifiers only when aRFS is disabled -- otherwise, CPU rmap sets and clears its own and they must not be touched manually. Fixes: 28bf26724fdb0 ("ice: Implement aRFS") Co-developed-by: Ivan Vecera <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Signed-off-by: Alexander Lobakin <[email protected]> Tested-by: Ivan Vecera <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-08Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/nexDavid S. Miller2-290/+211
t-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2022-04-07 Alexander Lobakin says: This hunts down several places around packet templates/dummies for switch rules which are either repetitive, fragile or just not really readable code. It's a common need to add new packet templates and to review such changes as well, try to simplify both with the help of a pair macros and aliases. ice_find_dummy_packet() became very complex at this point with tons of nested if-elses. It clearly showed this approach does not scale, so convert its logics to the simple mask-match + static const array. bloat-o-meter is happy about that (built w/ LLVM 13): add/remove: 0/1 grow/shrink: 1/1 up/down: 2/-1058 (-1056) Function old new delta ice_fill_adv_dummy_packet 289 291 +2 ice_adv_add_update_vsi_list 201 - -201 ice_add_adv_rule 2950 2093 -857 Total: Before=414512, After=413456, chg -0.25% add/remove: 53/52 grow/shrink: 0/0 up/down: 4660/-3988 (672) RO Data old new delta ice_dummy_pkt_profiles - 672 +672 Total: Before=37895, After=38567, chg +1.77% Diffstat also looks nice, and adding new packet templates now takes less lines. We'll probably come out with dynamic template crafting in a while, but for now let's improve what we have currently. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-04-07ice: switch: convert packet template match code to rodataAlexander Lobakin1-107/+108
Trade text size for rodata size and replace tons of nested if-elses to the const mask match based structs. The almost entire ice_find_dummy_packet() now becomes just one plain while-increment loop. The order in ice_dummy_pkt_profiles[] should be same with the if-elses order previously, as masks become less and less strict through the array to follow the original code flow. Apart from removing 80 locs of 4-level if-elses, it brings a solid text size optimization: add/remove: 0/1 grow/shrink: 1/1 up/down: 2/-1058 (-1056) Function old new delta ice_fill_adv_dummy_packet 289 291 +2 ice_adv_add_update_vsi_list 201 - -201 ice_add_adv_rule 2950 2093 -857 Total: Before=414512, After=413456, chg -0.25% add/remove: 53/52 grow/shrink: 0/0 up/down: 4660/-3988 (672) RO Data old new delta ice_dummy_pkt_profiles - 672 +672 Total: Before=37895, After=38567, chg +1.77% Signed-off-by: Alexander Lobakin <[email protected]> Reviewed-by: Michal Swiatkowski <[email protected]> Tested-by: Marcin Szycik <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-07ice: switch: use convenience macros to declare dummy pkt templatesAlexander Lobakin1-71/+62
Declarations of dummy/template packet headers and offsets can be minified to improve readability and simplify adding new templates. Move all the repetitive constructions into two macros and let them do the name and type expansions. Linewrap removal is yet another positive side effect. Signed-off-by: Alexander Lobakin <[email protected]> Reviewed-by: Michal Swiatkowski <[email protected]> Tested-by: Marcin Szycik <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-07ice: switch: use a struct to pass packet template paramsAlexander Lobakin1-174/+94
ice_find_dummy_packet() contains a lot of boilerplate code and a nice room for copy-paste mistakes. Instead of passing 3 separate pointers back and forth to get packet template (dummy) params, directly return a structure containing them. Then, use a macro to compose compound literals and avoid code duplication on return path. Now, dummy packet type/name is needed only once to return a full correct triple pkt-pkt_len-offsets, and those are all one-liners. dummy_ipv4_gtpu_ipv4_packet_offsets is just moved around and renamed (as well as dummy_ipv6_gtp_packet_offsets) with no function changes. Signed-off-by: Alexander Lobakin <[email protected]> Reviewed-by: Michal Swiatkowski <[email protected]> Tested-by: Marcin Szycik <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-07ice: switch: unobscurify bitops loop in ice_fill_adv_dummy_packet()Alexander Lobakin1-7/+9
A loop performing header modification according to the provided mask in ice_fill_adv_dummy_packet() is very cryptic (and error-prone). Replace two identical cast-deferences with a variable. Replace three struct-member-array-accesses with a variable. Invert the condition, reduce the indentation by one -> eliminate line wraps. Signed-off-by: Alexander Lobakin <[email protected]> Reviewed-by: Michal Swiatkowski <[email protected]> Tested-by: Marcin Szycik <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-07ice: switch: add and use u16[] aliases to ice_adv_lkup_elem::{h, m}_uAlexander Lobakin2-10/+17
ice_adv_lkup_elem fields h_u and m_u are being accessed as raw u16 arrays in several places. To reduce cast and braces burden, add permanent array-of-u16 aliases with the same size as the `union ice_prot_hdr` itself via anonymous unions to the actual struct declaration, and just access them directly. This: - removes the need to cast the union to u16[] and then dereference it each time -> reduces the horizon for potential bugs; - improves -Warray-bounds coverage -- the array size is now known at compilation time; - addresses cppcheck complaints. Signed-off-by: Alexander Lobakin <[email protected]> Reviewed-by: Michal Swiatkowski <[email protected]> Tested-by: Marcin Szycik <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-05ice: clear cmd_type_offset_bsz for TX ringsMaciej Fijalkowski1-1/+1
Currently when XDP rings are created, each descriptor gets its DD bit set, which turns out to be the wrong approach as it can lead to a situation where more descriptors get cleaned than it was supposed to, e.g. when AF_XDP busy poll is run with a large batch size. In this situation, the driver would request for more buffers than it is able to handle. Fix this by not setting the DD bits in ice_xdp_alloc_setup_rings(). They should be initialized to zero instead. Fixes: 9610bd988df9 ("ice: optimize XDP_TX workloads") Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Shwetha Nagaraju <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-05ice: xsk: fix VSI state check in ice_xsk_wakeup()Maciej Fijalkowski1-1/+1
ICE_DOWN is dedicated for pf->state. Check for ICE_VSI_DOWN being set on vsi->state in ice_xsk_wakeup(). Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Shwetha Nagaraju <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-05ice: synchronize_rcu() when terminating ringsMaciej Fijalkowski3-3/+7
Unfortunately, the ice driver doesn't respect the RCU critical section that XSK wakeup is surrounded with. To fix this, add synchronize_rcu() calls to paths that destroy resources that might be in use. This was addressed in other AF_XDP ZC enabled drivers, for reference see for example commit b3873a5be757 ("net/i40e: Fix concurrency issues between config flow and XSK") Fixes: efc2214b6047 ("ice: Add support for XDP") Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Shwetha Nagaraju <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-05ice: Do not skip not enabled queues in ice_vc_dis_qs_msgAnatolii Gerasymenko1-2/+2
Disable check for queue being enabled in ice_vc_dis_qs_msg, because there could be a case when queues were created, but were not enabled. We still need to delete those queues. Normal workflow for VF looks like: Enable path: VIRTCHNL_OP_ADD_ETH_ADDR (opcode 10) VIRTCHNL_OP_CONFIG_VSI_QUEUES (opcode 6) VIRTCHNL_OP_ENABLE_QUEUES (opcode 8) Disable path: VIRTCHNL_OP_DISABLE_QUEUES (opcode 9) VIRTCHNL_OP_DEL_ETH_ADDR (opcode 11) The issue appears only in stress conditions when VF is enabled and disabled very fast. Eventually there will be a case, when queues are created by VIRTCHNL_OP_CONFIG_VSI_QUEUES, but are not enabled by VIRTCHNL_OP_ENABLE_QUEUES. In turn, these queues are not deleted by VIRTCHNL_OP_DISABLE_QUEUES, because there is a check whether queues are enabled in ice_vc_dis_qs_msg. When we bring up the VF again, we will see the "Failed to set LAN Tx queue context" error during VIRTCHNL_OP_CONFIG_VSI_QUEUES step. This happens because old 16 queues were not deleted and VF requests to create 16 more, but ice_sched_get_free_qparent in ice_ena_vsi_txq would fail to find a parent node for first newly requested queue (because all nodes are allocated to 16 old queues). Testing Hints: Just enable and disable VF fast enough, so it would be disabled before reaching VIRTCHNL_OP_ENABLE_QUEUES. while true; do ip link set dev ens785f0v0 up sleep 0.065 # adjust delay value for you machine ip link set dev ens785f0v0 down done Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap") Signed-off-by: Anatolii Gerasymenko <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Alice Michael <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-04-05ice: Set txq_teid to ICE_INVAL_TEID on ring creationAnatolii Gerasymenko1-0/+1
When VF is freshly created, but not brought up, ring->txq_teid value is by default set to 0. But 0 is a valid TEID. On some platforms the Root Node of Tx scheduler has a TEID = 0. This can cause issues as shown below. The proper way is to set ring->txq_teid to ICE_INVAL_TEID (0xFFFFFFFF). Testing Hints: echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs ip link set dev ens785f0v0 up ip link set dev ens785f0v0 down If we have freshly created VF and quickly turn it on and off, so there would be no time to reach VIRTCHNL_OP_CONFIG_VSI_QUEUES stage, then VIRTCHNL_OP_DISABLE_QUEUES stage will fail with error: [ 639.531454] disable queue 89 failed 14 [ 639.532233] Failed to disable LAN Tx queues, error: ICE_ERR_AQ_ERROR [ 639.533107] ice 0000:02:00.0: Failed to stop Tx ring 0 on VSI 5 The reason for the fail is that we are trying to send AQ command to delete queue 89, which has never been created and receive an "invalid argument" error from firmware. As this queue has never been created, it's teid and ring->txq_teid have default value 0. ice_dis_vsi_txq has a check against non-existent queues: node = ice_sched_find_node_by_teid(pi->root, q_teids[i]); if (!node) continue; But on some platforms the Root Node of Tx scheduler has a teid = 0. Hence, ice_sched_find_node_by_teid finds a node with teid = 0 (it is pi->root), and we go further to submit an erroneous request to firmware. Fixes: 37bb83901286 ("ice: Move common functions out of ice_main.c part 7/7") Signed-off-by: Anatolii Gerasymenko <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Alice Michael <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.