| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Check that the MTU value requested by the VF is in the supported
range of MTUs before attempting to set the VF large packet enable,
otherwise reject the request. This also avoids unnecessary
register updates in the case of the 82599 controller.
Fixes: 872844ddb9e4 ("ixgbe: Enable jumbo frames support w/ SR-IOV")
Co-developed-by: Piotr Skajewski <[email protected]>
Signed-off-by: Piotr Skajewski <[email protected]>
Signed-off-by: Jesse Brandeburg <[email protected]>
Co-developed-by: Mateusz Palczewski <[email protected]>
Signed-off-by: Mateusz Palczewski <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add support for transmitting packets via AF_XDP zero-copy mechanism.
The packet transmission itself is implemented by igc_xdp_xmit_zc() which
is called from igc_clean_tx_irq() when the ring has AF_XDP zero-copy
enabled. Likewise i40e and ice drivers, the transmission budget used is
the number of descriptors available on the ring.
A new tx buffer type is introduced to 'enum igc_tx_buffer_type' to
indicate the tx buffer uses memory from xsk pool so it can be properly
cleaned after transmission or when the ring is cleaned.
The I225 controller has only 4 Tx hardware queues so the main difference
between igc and other Intel drivers that support AF_XDP zero-copy is
that there is no tx ring dedicated exclusively to XDP. Instead, tx
rings are shared between the network stack and XDP, and netdev queue
lock is used to ensure mutual exclusion. This is the same approach
implemented to support XDP_TX and XDP_REDIRECT actions.
Signed-off-by: Andre Guedes <[email protected]>
Signed-off-by: Vedang Patel <[email protected]>
Signed-off-by: Jithu Joseph <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Tested-by: Dvora Fuxbrumer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Add support for receiving packets via AF_XDP zero-copy mechanism.
Add a new flag to 'enum igc_ring_flags_t' to indicate the ring has
AF_XDP zero-copy enabled so proper ring setup is carried out during ring
configuration in igc_configure_rx_ring().
RX buffers can now be allocated via the shared pages mechanism (default
behavior of the driver) or via xsk pool (when AF_XDP zero-copy is
enabled) so a union is added to the 'struct igc_rx_buffer' to cover both
cases.
When AF_XDP zero-copy is enabled, rx buffers are allocated from the xsk
pool using the new helper igc_alloc_rx_buffers_zc() which is the
counterpart of igc_alloc_rx_buffers().
Likewise other Intel drivers that support AF_XDP zero-copy, in igc we
have a dedicated path for cleaning up rx irqs when zero-copy is enabled.
This avoids adding too many checks within igc_clean_rx_irq(), resulting
in a more readable and efficient code since this function is called from
the hot-path of the driver.
Signed-off-by: Andre Guedes <[email protected]>
Signed-off-by: Vedang Patel <[email protected]>
Signed-off-by: Jithu Joseph <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Tested-by: Dvora Fuxbrumer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Up to this point, Tx buffers are associated with either a skb or a xdpf,
and the IGC_TX_FLAGS_XDP flag was enough to distinguish between these
two case. However, with upcoming patches that will add AF_XDP zero-copy
support, a third case will be introduced so this flag-based approach
won't fit well.
In preparation to land AF_XDP zero-copy support, replace the
IGC_TX_FLAGS_XDP flag by an enum which will be extended once zero-copy
support is introduced to the driver.
Signed-off-by: Andre Guedes <[email protected]>
Signed-off-by: Vedang Patel <[email protected]>
Signed-off-by: Jithu Joseph <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Tested-by: Dvora Fuxbrumer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
In preparation for AF_XDP zero-copy support, encapsulate the code that
unmaps Tx buffers into its own local helper so we can reuse it, avoiding
code duplication.
Signed-off-by: Andre Guedes <[email protected]>
Signed-off-by: Vedang Patel <[email protected]>
Signed-off-by: Jithu Joseph <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Tested-by: Dvora Fuxbrumer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
In preparation for AF_XDP zero-copy support, encapsulate the code that
updates the driver RX stats in its own local helper so it can be reused
in the zero-copy path. Likewise, encapsulate TX stats code as well.
Signed-off-by: Andre Guedes <[email protected]>
Signed-off-by: Vedang Patel <[email protected]>
Signed-off-by: Jithu Joseph <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Tested-by: Dvora Fuxbrumer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Refactor XDP rxq info registration code, preparing the driver for AF_XDP
zero-copy support which is added by upcoming patches.
Currently, xdp_rxq and memory model are both registered during RX
resource setup time by igc_xdp_register_rxq_info() helper. With AF_XDP,
we want to register the memory model later on while configuring the ring
because we will know which memory model type to register
(MEM_TYPE_PAGE_SHARED or MEM_TYPE_XSK_BUFF_POOL).
The helpers igc_xdp_register_rxq_info() and igc_xdp_unregister_rxq_
info() are not useful anymore so they are removed.
Signed-off-by: Andre Guedes <[email protected]>
Signed-off-by: Vedang Patel <[email protected]>
Signed-off-by: Jithu Joseph <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Tested-by: Dvora Fuxbrumer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Refactor igc_clean_rx_ring() helper, preparing the code for AF_XDP
zero-copy support which is added by upcoming patches.
The refactor consists of encapsulating page-shared specific code into
its own helper, leaving common code that will be shared by both
page-shared and xsk pool in igc_clean_rx_ring().
Signed-off-by: Andre Guedes <[email protected]>
Signed-off-by: Vedang Patel <[email protected]>
Signed-off-by: Jithu Joseph <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Tested-by: Dvora Fuxbrumer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Refactor __igc_xdp_run_prog() helper from igc_xdp_run_prog(),
preparing the code for AF_XDP zero-copy support which is added
by upcoming patches.
The existing igc_xdp_run_prog() caters to regular XDP rx path
which has to verify if bpf_prog is not NULL. Zero-copy
path assumes that bpf_prog is not NULL and hence this check is
not required. Therefore it makes sense to refactor the common
code into a helper function, to avoid code duplication.
Signed-off-by: Andre Guedes <[email protected]>
Signed-off-by: Vedang Patel <[email protected]>
Signed-off-by: Jithu Joseph <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Tested-by: Dvora Fuxbrumer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Move the helper igc_xdp_is_enabled() to igc_xdp.h so it can be reused in
igc_xdp.c by upcoming patches that will introduce AF_XDP zero-copy
support to the driver.
Signed-off-by: Andre Guedes <[email protected]>
Signed-off-by: Vedang Patel <[email protected]>
Signed-off-by: Jithu Joseph <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Tested-by: Dvora Fuxbrumer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
There is a misspell word "retreived" in comment, so fix it to "retrieved".
Signed-off-by: Hao Chen <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There are double "slot" in comment, so remove the redundant one.
Signed-off-by: Hao Chen <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There are double "the" in comment, so remove the redundant one.
Signed-off-by: Hao Chen <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There are double "in" and "to" in comments, so remove the redundant one.
Signed-off-by: Hao Chen <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There are double "slot" in comment, so remove the redundant one.
Signed-off-by: Hao Chen <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Make use of the xdp_{init,prepare}_buff() helpers instead of
an open-coded version.
Signed-off-by: Matteo Croce <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Remove filters from being setup in case of software DCB and allow the
LLDP frames to be properly transmitted to the wire.
It is not possible to transmit the LLDP frame out of the port, if they
are filtered by control VSI. This prohibits software LLDP agent
properly communicate its DCB capabilities to the neighbors.
Fixes: 4b208eaa8078 ("i40e: Add init and default config of software based DCB")
Signed-off-by: Arkadiusz Kubalewski <[email protected]>
Tested-by: Imam Hassan Reza Biswas <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Unlike other supported adapters, 2.5G and 5G use different
PHY type identifiers for reading/writing PHY settings
and for reading link status. This commit introduces
separate PHY identifiers for these two operation types.
Fixes: 2e45d3f4677a ("i40e: Add support for X710 B/P & SFP+ cards")
Signed-off-by: Dawid Lukwinski <[email protected]>
Signed-off-by: Mateusz Palczewski <[email protected]>
Reviewed-by: Aleksandr Loktionov <[email protected]>
Tested-by: Dave Switzer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
When FEC mode was changed the link didn't know it because
the link was not reset and new parameters were not negotiated.
Set a flag 'I40E_AQ_PHY_ENABLE_ATOMIC_LINK' in 'abilities'
to restart the link and make it run with the new settings.
Fixes: 1d96340196f1 ("i40e: Add support FEC configuration for Fortville 25G")
Signed-off-by: Jaroslaw Gawin <[email protected]>
Signed-off-by: Mateusz Palczewski <[email protected]>
Tested-by: Dave Switzer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Currently the call to i40e_client_del_instance frees the object
pf->cinst, however pf->cinst->lan_info is being accessed after
the free. Fix this by adding the missing return.
Addresses-Coverity: ("Read from pointer after free")
Fixes: 7b0b1a6d0ac9 ("i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events")
Signed-off-by: Yunjian Wang <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Commit 12738ac4754e ("i40e: Fix sparse errors in i40e_txrx.c") broke
XDP support in the i40e driver. That commit was fixing a sparse error
in the code by introducing a new variable xdp_res instead of
overloading this into the skb pointer. The problem is that the code
later uses the skb pointer in if statements and these where not
extended to also test for the new xdp_res variable. Fix this by adding
the correct tests for xdp_res in these places.
The skb pointer was used to store the result of the XDP program by
overloading the results in the error pointer
ERR_PTR(-result). Therefore, the allocation failure test that used to
only test for !skb now need to be extended to also consider !xdp_res.
i40e_cleanup_headers() had a check that based on the skb value being
an error pointer, i.e. a result from the XDP program != XDP_PASS, and
if so start to process a new packet immediately, instead of populating
skb fields and sending the skb to the stack. This check is not needed
anymore, since we have added an explicit test for xdp_res being set
and if so just do continue to pick the next packet from the NIC.
Fixes: 12738ac4754e ("i40e: Fix sparse errors in i40e_txrx.c")
Acked-by: Jesper Dangaard Brouer <[email protected]>
Tested-by: Jesper Dangaard Brouer <[email protected]>
Reported-by: Jesper Dangaard Brouer <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
The flex-byte for GTP-U protocol header fields uses the magic number,
which is hard to maintain and understand, define the interested fields
with meaningful macro name, based on the GTP-U protocol stack:
GTP-U header
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 0x1 |1|0|1|0|0| 0xff | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| TEID = 1654 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Sequence Number = 0 |N-PDU Number=0 |NextExtHdr=0x85|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
GTP-U Extension Header (PDU Session Container)
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ExtHdrLen=2 |Type=0 | Spare |0|0| QFI | PPI | Spare |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Padding |NextExtHdr=0x0 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Signed-off-by: Haiyue Wang <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
When the FDIR entry is found, just return the result directly to break
the loop.
Signed-off-by: Haiyue Wang <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
The maximum number (2) of flex-byte support is derived from ethtool
use-def data size (8 byte).
Change the magic number 2 to macro definition, and add the comment to
track the design thinking, so the code is clear and easily maintained.
Signed-off-by: Haiyue Wang <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Both iavf_free_all_tx_resources() and iavf_free_all_rx_resources() have
already been called in the very same function.
Remove the duplicate calls.
Signed-off-by: Stefan Assmann <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
The minimum size of admin send/receive queue is 1 and 2 respectively.
The admin send queue can't be set to 1 because in that case, the
firmware would fail to init.
Signed-off-by: Coiby Xu <[email protected]>
Tested-by: Dave Switzer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Use the minimum of the number of descriptors thus we will allocate the
minimal ring buffers for kdump.
Signed-off-by: Coiby Xu <[email protected]>
Tested-by: Dave Switzer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Set the number of the MSI-X vectors to 1. When MSI-X is enabled,
it's not allowed to use more TC queue pairs than MSI-X vectors
(pf->num_lan_msix) exist. Thus the number of Tx and Rx pairs
(vsi->num_queue_pairs) will be equal to the number of MSI-X vectors,
i.e., 1.
Signed-off-by: Coiby Xu <[email protected]>
Tested-by: Dave Switzer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Refactor repeated link state reporting code into a separate helper
functions: i40e_set_vf_link_state() i40e_vc_link_speed2mbps().
Add support of VIRTCHNL_VF_CAP_ADV_LINK_SPEED;
Signed-off-by: Arkadiusz Kubalewski <[email protected]>
Signed-off-by: Aleksandr Loktionov <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Provide the ability to enable SCTP RSS hashing by ethtool.
It gives users option of generating RSS hash based on the SCTP source
and destination ports numbers, IPv4 or IPv6 source and destination
addresses.
Signed-off-by: Haiyue Wang <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Provides the ability to enable UDP RSS hashing by ethtool.
It gives users option of generating RSS hash based on the UDP source
and destination ports numbers, IPv4 or IPv6 source and destination
addresses.
Signed-off-by: Haiyue Wang <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Provides the ability to enable TCP RSS hashing by ethtool.
It gives users option of generating RSS hash based on the TCP source
and destination ports numbers, IPv4 or IPv6 source and destination
addresses.
Signed-off-by: Haiyue Wang <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Add the virtchnl message interface to VF, so that VF can request RSS
input set(s) based on PF's capability.
This framework allows ethtool RSS config support on the VF driver.
Signed-off-by: Haiyue Wang <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Add the handler for virtchnl message VIRTCHNL_OP_DEL_RSS_CFG to remove
an existing RSS configuration with matching hashed fields.
Signed-off-by: Vignesh Sridhar <[email protected]>
Co-developed-by: Jia Guo <[email protected]>
Signed-off-by: Jia Guo <[email protected]>
Signed-off-by: Qi Zhang <[email protected]>
Signed-off-by: Haiyue Wang <[email protected]>
Tested-by: Bo Chen <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Currently, RSS hash input is not available to AVF by ethtool, it is set
by the PF directly.
Add the RSS configure support for AVF through new virtchnl message, and
define the capability flag VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF to query this
new RSS offload support.
Signed-off-by: Jia Guo <[email protected]>
Signed-off-by: Qi Zhang <[email protected]>
Signed-off-by: Haiyue Wang <[email protected]>
Tested-by: Bo Chen <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Currently, the driver gets the VF's VSI by using a long string of
dereferences (i.e. vf->pf->vsi[vf->lan_vsi_idx]). If the method to get
the VF's VSI were to change the driver would have to change it in every
location. Fix this by adding the helper ice_get_vf_vsi().
Signed-off-by: Brett Creeley <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Pointer vsi is being re-assigned a value that is never read,
the assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Add code to support UDP segmentation offload (USO) for
hardware that supports it.
Suggested-by: Jesse Brandeburg <[email protected]>
Signed-off-by: Brett Creeley <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
As the hardware is capable of supporting UDP segmentation offload, add a
capability bit to virtchnl.h to communicate this and have the driver
advertise its support.
Suggested-by: Jesse Brandeburg <[email protected]>
Signed-off-by: Brett Creeley <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Declare bitmap of allowed commands on VF. Initialize default
opcodes list that should be always supported. Declare array of
supported opcodes for each caps used in virtchnl code.
Change allowed bitmap by setting or clearing corresponding
bit to allowlist (bit set) or denylist (bit clear).
Signed-off-by: Michal Swiatkowski <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Attempt to detect malicious VFs and, if suspected, log the information but
keep going to allow the user to take any desired actions.
Potentially malicious VFs are identified by checking if the VFs are
transmitting too many messages via the PF-VF mailbox which could cause an
overflow of this channel resulting in denial of service. This is done by
creating a snapshot or static capture of the mailbox buffer which can be
traversed and in which the messages sent by VFs are tracked.
Co-developed-by: Yashaswini Raghuram Prathivadi Bhayankaram <[email protected]>
Signed-off-by: Yashaswini Raghuram Prathivadi Bhayankaram <[email protected]>
Co-developed-by: Paul M Stillwell Jr <[email protected]>
Signed-off-by: Paul M Stillwell Jr <[email protected]>
Co-developed-by: Brett Creeley <[email protected]>
Signed-off-by: Brett Creeley <[email protected]>
Signed-off-by: Vignesh Sridhar <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Expose EEE Tx and Rx low power idle counters via ethtool
A EEE TX or RX LPI event occurs when the transmitter or the receiver
enters EEE (IEEE802.3az) LPI state.
ethtool --statistics <iface>
Signed-off-by: Sasha Neftin <[email protected]>
Tested-by: Dvora Fuxbrumer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
drivers/net/ethernet/intel/igc/igc_i225.c:235 igc_write_nvm_srwr()
warn: loop overwrites return value 'ret_val'
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Sasha Neftin <[email protected]>
Tested-by: Dvora Fuxbrumer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
The i225 device offers a number of special PTP Hardware Clock features on
the Software Defined Pins (SDPs) - much like i210, which is used as
inspiration for this patch. It enables two possible functions, namely
time stamping external events and periodic output signals.
The assignment of PHC functions to the four SDP can be freely chosen by
the user.
For the external events time stamping, when the SDP (configured as input
by user) level changes, an interrupt is generated and the kernel
Precision Time Protocol (PTP) is informed.
For the periodic output signals, the i225 is configured to generate them
(so the SDP level will change periodically) and the driver also has to
keep updating the time of the next level change. However, this work is
not necessary for some frequencies as the i225 takes care of them
(namely, anything with a half-cycle of 500ms, 250ms, 125ms or < 70ms).
While i225 allows up to four timers to be used to source the time used
on the external events or output signals, this patch uses only one of
those timers. Main reason is to keep it simple, as it's not clear how
these extra timers would be exposed to users. Note that currently a NIC
can expose a single PTP device.
Signed-off-by: Ederson de Souza <[email protected]>
Tested-by: Dvora Fuxbrumer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
The i225 device can produce one interrupt on the full second, much
like i210 - from where this patch is inspired.
This patch sets up the full second interruption on the i225 and when
receiving it, it sends a PPS event to PTP (Precision Time Protocol)
kernel subsystem.
The PTP subsystem exposes the PPS events via ioctl and sysfs, and one
can use the `testptp` tool (tools/testing/selftests/ptp) to check that
the events are being generated.
Signed-off-by: Ederson de Souza <[email protected]>
Tested-by: Dvora Fuxbrumer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Add new function which checks MTA_REGISTER if its filled correctly.
If not then writes again to same register.
There is possibility that i210 and i211 could not accept
MTA_REGISTER settings, specially when you add and remove
many of multicast addresses in short time.
Without this patch there is possibility that multicast settings will be
not always set correctly in hardware.
Signed-off-by: Grzegorz Siwik <[email protected]>
Tested-by: Dave Switzer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
i210 has a total of 24KB of transmit packet buffer. When in Qav mode,
this buffer is divided into four pieces, one for each Tx queue.
Currently, 8KB are given to each of the two SR queues and 4KB are given
to each of the two SP queues.
However, it was noticed that such distribution can make best effort
traffic (which would usually go to the SP queues when Qav is enabled, as
the SR queues would be used by ETF or CBS qdiscs for TSN-aware traffic)
perform poorly. Using iperf3 to measure, one could see the performance
of best effort traffic drop by nearly a third (from 935Mbps to 578Mbps),
with no TSN traffic competing.
This patch redistributes the 24KB to each queue equally: 6KB each. On
tests, there was no notable performance reduction of best effort traffic
performance when there was no TSN traffic competing.
Below, more details about the data collected:
All experiments were run using the following qdisc setup:
qdisc taprio 100: root refcnt 9 tc 4 map 3 3 3 2 3 0 0 3 3 3 3 3 3 3 3 3
queues offset 0 count 1 offset 1 count 1 offset 2 count 1 offset 3 count 1
clockid TAI base-time 0 cycle-time 10000000 cycle-time-extension 0
index 0 cmd S gatemask 0xf interval 10000000
qdisc etf 8045: parent 100:1 clockid TAI delta 1000000 offload on
deadline_mode off skip_sock_check off
TSN traffic, when enabled, had this characteristics:
Packet size: 1500 bytes
Transmission interval: 125us
----------------------------------
Without this patch:
----------------------------------
- TCP data:
- No TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.35 GBytes 578 Mbits/sec 0
- With TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.07 GBytes 460 Mbits/sec 1
- TCP data limiting iperf3 buffer size to 4K:
- No TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.35 GBytes 579 Mbits/sec 0
- With TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.08 GBytes 462 Mbits/sec 0
- TCP data limiting iperf3 buffer size to 192 bytes (smallest size without
serious performance degradation):
- No TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.34 GBytes 577 Mbits/sec 0
- With TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.07 GBytes 461 Mbits/sec 1
- UDP data at 1000Mbit/sec:
- No TSN traffic:
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-20.00 sec 1.36 GBytes 586 Mbits/sec 0.000 ms 0/1011407 (0%)
- With TSN traffic:
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-20.00 sec 1.05 GBytes 451 Mbits/sec 0.000 ms 0/778672 (0%)
----------------------------------
With this patch:
----------------------------------
- TCP data:
- No TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 2.17 GBytes 932 Mbits/sec 0
- With TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.50 GBytes 646 Mbits/sec 1
- TCP data limiting iperf3 buffer size to 4K:
- No TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 2.17 GBytes 931 Mbits/sec 0
- With TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.50 GBytes 645 Mbits/sec 0
- TCP data limiting iperf3 buffer size to 192 bytes (smallest size without
serious performance degradation):
- No TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 2.17 GBytes 932 Mbits/sec 1
- With TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.50 GBytes 645 Mbits/sec 0
- UDP data at 1000Mbit/sec:
- No TSN traffic:
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-20.00 sec 2.23 GBytes 956 Mbits/sec 0.000 ms 0/1650226 (0%)
- With TSN traffic:
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-20.00 sec 1.51 GBytes 649 Mbits/sec 0.000 ms 0/1120264 (0%)
Signed-off-by: Ederson de Souza <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Fix this panic by adding more rules to calculate the value of @rss_size_max
which could be used in allocating the queues when bpf is loaded, which,
however, could cause the failure and then trigger the NULL pointer of
vsi->rx_rings. Prio to this fix, the machine doesn't care about how many
cpus are online and then allocates 256 queues on the machine with 32 cpus
online actually.
Once the load of bpf begins, the log will go like this "failed to get
tracking for 256 queues for VSI 0 err -12" and this "setup of MAIN VSI
failed".
Thus, I attach the key information of the crash-log here.
BUG: unable to handle kernel NULL pointer dereference at
0000000000000000
RIP: 0010:i40e_xdp+0xdd/0x1b0 [i40e]
Call Trace:
[2160294.717292] ? i40e_reconfig_rss_queues+0x170/0x170 [i40e]
[2160294.717666] dev_xdp_install+0x4f/0x70
[2160294.718036] dev_change_xdp_fd+0x11f/0x230
[2160294.718380] ? dev_disable_lro+0xe0/0xe0
[2160294.718705] do_setlink+0xac7/0xe70
[2160294.719035] ? __nla_parse+0xed/0x120
[2160294.719365] rtnl_newlink+0x73b/0x860
Fixes: 41c445ff0f48 ("i40e: main driver core")
Co-developed-by: Shujin Li <[email protected]>
Signed-off-by: Shujin Li <[email protected]>
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The scope of this variable can be reduced so do that.
Signed-off-by: Paul M Stillwell Jr <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|