aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2022-03-10ice: Fix race condition during interface enslaveIvan Vecera2-2/+21
Commit 5dbbbd01cbba83 ("ice: Avoid RTNL lock when re-creating auxiliary device") changes a process of re-creation of aux device so ice_plug_aux_dev() is called from ice_service_task() context. This unfortunately opens a race window that can result in dead-lock when interface has left LAG and immediately enters LAG again. Reproducer: ``` #!/bin/sh ip link add lag0 type bond mode 1 miimon 100 ip link set lag0 for n in {1..10}; do echo Cycle: $n ip link set ens7f0 master lag0 sleep 1 ip link set ens7f0 nomaster done ``` This results in: [20976.208697] Workqueue: ice ice_service_task [ice] [20976.213422] Call Trace: [20976.215871] __schedule+0x2d1/0x830 [20976.219364] schedule+0x35/0xa0 [20976.222510] schedule_preempt_disabled+0xa/0x10 [20976.227043] __mutex_lock.isra.7+0x310/0x420 [20976.235071] enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core] [20976.251215] ib_enum_roce_netdev+0xa4/0xe0 [ib_core] [20976.256192] ib_cache_setup_one+0x33/0xa0 [ib_core] [20976.261079] ib_register_device+0x40d/0x580 [ib_core] [20976.266139] irdma_ib_register_device+0x129/0x250 [irdma] [20976.281409] irdma_probe+0x2c1/0x360 [irdma] [20976.285691] auxiliary_bus_probe+0x45/0x70 [20976.289790] really_probe+0x1f2/0x480 [20976.298509] driver_probe_device+0x49/0xc0 [20976.302609] bus_for_each_drv+0x79/0xc0 [20976.306448] __device_attach+0xdc/0x160 [20976.310286] bus_probe_device+0x9d/0xb0 [20976.314128] device_add+0x43c/0x890 [20976.321287] __auxiliary_device_add+0x43/0x60 [20976.325644] ice_plug_aux_dev+0xb2/0x100 [ice] [20976.330109] ice_service_task+0xd0c/0xed0 [ice] [20976.342591] process_one_work+0x1a7/0x360 [20976.350536] worker_thread+0x30/0x390 [20976.358128] kthread+0x10a/0x120 [20976.365547] ret_from_fork+0x1f/0x40 ... [20976.438030] task:ip state:D stack: 0 pid:213658 ppid:213627 flags:0x00004084 [20976.446469] Call Trace: [20976.448921] __schedule+0x2d1/0x830 [20976.452414] schedule+0x35/0xa0 [20976.455559] schedule_preempt_disabled+0xa/0x10 [20976.460090] __mutex_lock.isra.7+0x310/0x420 [20976.464364] device_del+0x36/0x3c0 [20976.467772] ice_unplug_aux_dev+0x1a/0x40 [ice] [20976.472313] ice_lag_event_handler+0x2a2/0x520 [ice] [20976.477288] notifier_call_chain+0x47/0x70 [20976.481386] __netdev_upper_dev_link+0x18b/0x280 [20976.489845] bond_enslave+0xe05/0x1790 [bonding] [20976.494475] do_setlink+0x336/0xf50 [20976.502517] __rtnl_newlink+0x529/0x8b0 [20976.543441] rtnl_newlink+0x43/0x60 [20976.546934] rtnetlink_rcv_msg+0x2b1/0x360 [20976.559238] netlink_rcv_skb+0x4c/0x120 [20976.563079] netlink_unicast+0x196/0x230 [20976.567005] netlink_sendmsg+0x204/0x3d0 [20976.570930] sock_sendmsg+0x4c/0x50 [20976.574423] ____sys_sendmsg+0x1eb/0x250 [20976.586807] ___sys_sendmsg+0x7c/0xc0 [20976.606353] __sys_sendmsg+0x57/0xa0 [20976.609930] do_syscall_64+0x5b/0x1a0 [20976.613598] entry_SYSCALL_64_after_hwframe+0x65/0xca 1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev() is called from ice_service_task() context, aux device is created and associated device->lock is taken. 2. Command 'ip link ... set master...' calls ice's notifier under RTNL lock and that notifier calls ice_unplug_aux_dev(). That function tries to take aux device->lock but this is already taken by ice_plug_aux_dev() in step 1 3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already taken in step 2 4. Dead-lock The patch fixes this issue by following changes: - Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev() call in ice_service_task() - The bit is checked in ice_clear_rdma_cap() and only if it is not set then ice_unplug_aux_dev() is called. If it is set (in other words plugging of aux device was requested and ice_plug_aux_dev() is potentially running) then the function only clears the bit - Once ice_plug_aux_dev() call (in ice_service_task) is finished the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked whether it was already cleared by ice_clear_rdma_cap(). If so then aux device is unplugged. Signed-off-by: Ivan Vecera <[email protected]> Co-developed-by: Petr Oros <[email protected]> Signed-off-by: Petr Oros <[email protected]> Reviewed-by: Dave Ertman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-08ice: Fix curr_link_speed advertised speedJedrzej Jagielski1-1/+1
Change curr_link_speed advertised speed, due to link_info.link_speed is not equal phy.curr_user_speed_req. Without this patch it is impossible to set advertised speed to same as link_speed. Testing Hints: Try to set advertised speed to 25G only with 25G default link (use ethtool -s 0x80000000) Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by: Grzegorz Siwik <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-03-08ice: Don't use GFP_KERNEL in atomic contextChristophe JAILLET1-1/+1
ice_misc_intr() is an irq handler. It should not sleep. Use GFP_ATOMIC instead of GFP_KERNEL when allocating some memory. Fixes: 348048e724a0 ("ice: Implement iidc operations") Signed-off-by: Christophe JAILLET <[email protected]> Tested-by: Leszek Kaliszczuk <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-03-08ice: Fix error with handling of bonding MTUDave Ertman2-15/+15
When a bonded interface is destroyed, .ndo_change_mtu can be called during the tear-down process while the RTNL lock is held. This is a problem since the auxiliary driver linked to the LAN driver needs to be notified of the MTU change, and this requires grabbing a device_lock on the auxiliary_device's dev. Currently this is being attempted in the same execution context as the call to .ndo_change_mtu which is causing a dead-lock. Move the notification of the changed MTU to a separate execution context (watchdog service task) and eliminate the "before" notification. Fixes: 348048e724a0e ("ice: Implement iidc operations") Signed-off-by: Dave Ertman <[email protected]> Tested-by: Jonathan Toppins <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-03-08ice: stop disabling VFs due to PF error responsesJacob Keller2-21/+0
The ice_vc_send_msg_to_vf function has logic to detect "failure" responses being sent to a VF. If a VF is sent more than ICE_DFLT_NUM_INVAL_MSGS_ALLOWED then the VF is marked as disabled. Almost identical logic also existed in the i40e driver. This logic was added to the ice driver in commit 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") which itself copied from the i40e implementation in commit 5c3c48ac6bf5 ("i40e: implement virtual device interface"). Neither commit provides a proper explanation or justification of the check. In fact, later commits to i40e changed the logic to allow bypassing the check in some specific instances. The "logic" for this seems to be that error responses somehow indicate a malicious VF. This is not really true. The PF might be sending an error for any number of reasons such as lack of resources, etc. Additionally, this causes the PF to log an info message for every failed VF response which may confuse users, and can spam the kernel log. This behavior is not documented as part of any requirement for our products and other operating system drivers such as the FreeBSD implementation of our drivers do not include this type of check. In fact, the change from dev_err to dev_info in i40e commit 18b7af57d9c1 ("i40e: Lower some message levels") explains that these messages typically don't actually indicate a real issue. It is quite likely that a user who hits this in practice will be very confused as the VF will be disabled without an obvious way to recover. We already have robust malicious driver detection logic using actual hardware detection mechanisms that detect and prevent invalid device usage. Remove the logic since its not a documented requirement and the behavior is not intuitive. Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") Signed-off-by: Jacob Keller <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-03-08i40e: stop disabling VFs due to PF error responsesJacob Keller3-59/+9
The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf) function has logic to detect "failure" responses sent to the VF. If a VF is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is marked as disabled. In either case, a dev_info message is printed stating that a VF opcode failed. This logic originates from the early implementation of VF support in commit 5c3c48ac6bf5 ("i40e: implement virtual device interface"). That commit did not go far enough. The "logic" for this behavior seems to be that error responses somehow indicate a malicious VF. This is not really true. The PF might be sending an error for any number of reasons such as lacking resources, an unsupported operation, etc. This does not indicate a malicious VF. We already have a separate robust malicious VF detection which relies on hardware logic to detect and prevent a variety of behaviors. There is no justification for this behavior in the original implementation. In fact, a later commit 18b7af57d9c1 ("i40e: Lower some message levels") reduced the opcode failure message from a dev_err to a dev_info. In addition, recent commit 01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change") changed the logic to allow quieting it for expected failures. That commit prevented this logic from kicking in for specific circumstances. This change did not go far enough. The behavior is not documented nor is it part of any requirement for our products. Other operating systems such as the FreeBSD implementation of our driver do not include this logic. It is clear this check does not make sense, and causes problems which led to ugly workarounds. Fix this by just removing the entire logic and the need for the i40e_vc_send_msg_to_vf_ex function. Fixes: 01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change") Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Jacob Keller <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-03-08iavf: Fix adopting new combined settingMichal Maloszewski2-4/+10
In some cases overloaded flag IAVF_FLAG_REINIT_ITR_NEEDED which should indicate that interrupts need to be completely reinitialized during reset leads to RTNL deadlocks using ethtool -C while a reset is in progress. To fix, it was added a new flag IAVF_FLAG_REINIT_MSIX_NEEDED used to trigger MSI-X reinit. New combined setting is fixed adopt after VF reset. This has been implemented by call reinit interrupt scheme during VF reset. Without this fix new combined setting has never been adopted. Fixes: 209f2f9c7181 ("iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation") Signed-off-by: Grzegorz Szczurek <[email protected]> Signed-off-by: Mitch Williams <[email protected]> Signed-off-by: Michal Maloszewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-03-08iavf: Fix handling of vlan strip virtual channel messagesMichal Maloszewski1-0/+40
Modify netdev->features for vlan stripping based on virtual channel messages received from the PF. Change is needed to synchronize vlan strip status between PF sysfs and iavf ethtool. Fixes: 5951a2b9812d ("iavf: Fix VLAN feature flags after VFR") Signed-off-by: Norbert Ciosek <[email protected]> Signed-off-by: Michal Maloszewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-03-03ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc()Maciej Fijalkowski1-2/+4
Commit c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK") addressed the ring transient state when MEM_TYPE_XSK_BUFF_POOL was being configured which in turn caused the interface to through down/up. Maurice reported that when carrier is not ok and xsk_pool is present on ring pair, ksoftirqd will consume 100% CPU cycles due to the constant NAPI rescheduling as ixgbe_poll() states that there is still some work to be done. To fix this, do not set work_done to false for a !netif_carrier_ok(). Fixes: c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK") Reported-by: Maurice Baijens <[email protected]> Tested-by: Maurice Baijens <[email protected]> Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-28e1000e: Correct NVM checksum verification flowSasha Neftin1-2/+2
Update MAC type check e1000_pch_tgp because for e1000_pch_cnp, NVM checksum update is still possible. Emit a more detailed warning message. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1191663 Fixes: 4051f68318ca ("e1000e: Do not take care about recovery NVM checksum") Reported-by: Thomas Bogendoerfer <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-28e1000e: Fix possible HW unit hang after an s0ix exitSasha Neftin4-0/+32
Disable the OEM bit/Gig Disable/restart AN impact and disable the PHY LAN connected device (LCD) reset during power management flows. This fixes possible HW unit hangs on the s0ix exit on some corporate ADL platforms. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821 Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Suggested-by: Dima Ruinskiy <[email protected]> Suggested-by: Nir Efrati <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Kai-Heng Feng <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-28igc: igc_write_phy_reg_gpy: drop premature returnSasha Neftin1-2/+0
Similar to "igc_read_phy_reg_gpy: drop premature return" patch. igc_write_phy_reg_gpy checks the return value from igc_write_phy_reg_mdic and if it's not 0, returns immediately. By doing this, it leaves the HW semaphore in the acquired state. Drop this premature return statement, the function returns after releasing the semaphore immediately anyway. Fixes: 5586838fe9ce ("igc: Add code for PHY support") Suggested-by: Dima Ruinskiy <[email protected]> Reported-by: Corinna Vinschen <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-28igc: igc_read_phy_reg_gpy: drop premature returnCorinna Vinschen1-2/+0
igc_read_phy_reg_gpy checks the return value from igc_read_phy_reg_mdic and if it's not 0, returns immediately. By doing this, it leaves the HW semaphore in the acquired state. Drop this premature return statement, the function returns after releasing the semaphore immediately anyway. Fixes: 5586838fe9ce ("igc: Add code for PHY support") Signed-off-by: Corinna Vinschen <[email protected]> Acked-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25iavf: Fix __IAVF_RESETTING state usageSlawomir Laba1-7/+6
The setup of __IAVF_RESETTING state in watchdog task had no effect and could lead to slow resets in the driver as the task for __IAVF_RESETTING state only requeues watchdog. Till now the __IAVF_RESETTING was interpreted by reset task as running state which could lead to errors with allocating and resources disposal. Make watchdog_task queue the reset task when it's necessary. Do not update the state to __IAVF_RESETTING so the reset task knows exactly what is the current state of the adapter. Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25iavf: Fix missing check for running netdevSlawomir Laba1-2/+5
The driver was queueing reset_task regardless of the netdev state. Do not queue the reset task in iavf_change_mtu if netdev is not running. Fixes: fdd4044ffdc8 ("iavf: Remove timer for work triggering, use delaying work instead") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25iavf: Fix deadlock in iavf_reset_taskSlawomir Laba1-0/+1
There exists a missing mutex_unlock call on crit_lock in iavf_reset_task call path. Unlock the crit_lock before returning from reset task. Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25iavf: Fix race in init stateSlawomir Laba1-1/+2
When iavf_init_version_check sends VIRTCHNL_OP_GET_VF_RESOURCES message, the driver will wait for the response after requeueing the watchdog task in iavf_init_get_resources call stack. The logic is implemented this way that iavf_init_get_resources has to be called in order to allocate adapter->vf_res. It is polling for the AQ response in iavf_get_vf_config function. Expect a call trace from kernel when adminq_task worker handles this message first. adapter->vf_res will be NULL in iavf_virtchnl_completion. Make the watchdog task not queue the adminq_task if the init process is not finished yet. Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25iavf: Fix locking for VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPSSlawomir Laba3-24/+23
iavf_virtchnl_completion is called under crit_lock but when the code for VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is called, this lock is released in order to obtain rtnl_lock to avoid ABBA deadlock with unregister_netdev. Along with the new way iavf_remove behaves, there exist many risks related to the lock release and attmepts to regrab it. The driver faces crashes related to races between unregister_netdev and netdev_update_features. Yet another risk is that the driver could already obtain the crit_lock in order to destroy it and iavf_virtchnl_completion could crash or block forever. Make iavf_virtchnl_completion never relock crit_lock in it's call paths. Extract rtnl_lock locking logic to the driver for unregister_netdev in order to set the netdev_registered flag inside the lock. Introduce a new flag that will inform adminq_task to perform the code from VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS right after it finishes processing messages. Guard this code with remove flags so it's never called when the driver is in remove state. Fixes: 5951a2b9812d ("iavf: Fix VLAN feature flags after VFR") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25iavf: Fix init state closure on removeSlawomir Laba2-1/+27
When init states of the adapter work, the errors like lack of communication with the PF might hop in. If such events occur the driver restores previous states in order to retry initialization in a proper way. When remove task kicks in, this situation could lead to races with unregistering the netdevice as well as resources cleanup. With the commit introducing the waiting in remove for init to complete, this problem turns into an endless waiting if init never recovers from errors. Introduce __IAVF_IN_REMOVE_TASK bit to indicate that the remove thread has started. Make __IAVF_COMM_FAILED adapter state respect the __IAVF_IN_REMOVE_TASK bit and set the __IAVF_INIT_FAILED state and return without any action instead of trying to recover. Make __IAVF_INIT_FAILED adapter state respect the __IAVF_IN_REMOVE_TASK bit and return without any further actions. Make the loop in the remove handler break when adapter has __IAVF_INIT_FAILED state set. Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25iavf: Add waiting so the port is initialized in removeSlawomir Laba1-11/+16
There exist races when port is being configured and remove is triggered. unregister_netdev is not and can't be called under crit_lock mutex since it is calling ndo_stop -> iavf_close which requires this lock. Depending on init state the netdev could be still unregistered so unregister_netdev never cleans up, when shortly after that the device could become registered. Make iavf_remove wait until port finishes initialization. All critical state changes are atomic (under crit_lock). Crashes that come from iavf_reset_interrupt_capability and iavf_free_traffic_irqs should now be solved in a graceful manner. Fixes: 605ca7c5c6707 ("iavf: Fix kernel BUG in free_msi_irqs") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25iavf: Rework mutexes for better synchronisationSlawomir Laba2-31/+36
The driver used to crash in multiple spots when put to stress testing of the init, reset and remove paths. The user would experience call traces or hangs when creating, resetting, removing VFs. Depending on the machines, the call traces are happening in random spots, like reset restoring resources racing with driver remove. Make adapter->crit_lock mutex a mandatory lock for guarding the operations performed on all workqueues and functions dealing with resource allocation and disposal. Make __IAVF_REMOVE a final state of the driver respected by workqueues that shall not requeue, when they fail to obtain the crit_lock. Make the IRQ handler not to queue the new work for adminq_task when the __IAVF_REMOVE state is set. Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-24Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"Mateusz Palczewski1-11/+1
Revert of a patch that instead of fixing a AQ error when trying to reset BW limit introduced several regressions related to creation and managing TC. Currently there are errors when creating a TC on both PF and VF. Error log: [17428.783095] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14 [17428.783107] i40e 0000:3b:00.1: Failed configuring TC map 0 for VSI 391 [17428.783254] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14 [17428.783259] i40e 0000:3b:00.1: Unable to configure TC map 0 for VSI 391 This reverts commit 3d2504663c41104b4359a15f35670cfa82de1bbf. Fixes: 3d2504663c41 (i40e: Fix reset bw limit when DCB enabled with 1 TC) Signed-off-by: Mateusz Palczewski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-18ice: initialize local variable 'tlv'Tom Rix1-1/+1
Clang static analysis reports this issues ice_common.c:5008:21: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage ldo->phy_type_low |= ((u64)buf << (i * 16)); ~~~~~~~~~~~~~~~~~ ^ When called from ice_cfg_phy_fec() ldo is the uninitialized local variable tlv. So initialize. Fixes: ea78ce4dab05 ("ice: add link lenient and default override support") Signed-off-by: Tom Rix <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-02-18ice: check the return of ice_ptp_gettimex64Tom Rix1-1/+4
Clang static analysis reports this issue time64.h:69:50: warning: The left operand of '+' is a garbage value set_normalized_timespec64(&ts_delta, lhs.tv_sec + rhs.tv_sec, ~~~~~~~~~~ ^ In ice_ptp_adjtime_nonatomic(), the timespec64 variable 'now' is set by ice_ptp_gettimex64(). This function can fail with -EBUSY, so 'now' can have a gargbage value. So check the return. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Signed-off-by: Tom Rix <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-02-18ice: fix concurrent reset and removal of VFsJacob Keller3-18/+27
Commit c503e63200c6 ("ice: Stop processing VF messages during teardown") introduced a driver state flag, ICE_VF_DEINIT_IN_PROGRESS, which is intended to prevent some issues with concurrently handling messages from VFs while tearing down the VFs. This change was motivated by crashes caused while tearing down and bringing up VFs in rapid succession. It turns out that the fix actually introduces issues with the VF driver caused because the PF no longer responds to any messages sent by the VF during its .remove routine. This results in the VF potentially removing its DMA memory before the PF has shut down the device queues. Additionally, the fix doesn't actually resolve concurrency issues within the ice driver. It is possible for a VF to initiate a reset just prior to the ice driver removing VFs. This can result in the remove task concurrently operating while the VF is being reset. This results in similar memory corruption and panics purportedly fixed by that commit. Fix this concurrency at its root by protecting both the reset and removal flows using the existing VF cfg_lock. This ensures that we cannot remove the VF while any outstanding critical tasks such as a virtchnl message or a reset are occurring. This locking change also fixes the root cause originally fixed by commit c503e63200c6 ("ice: Stop processing VF messages during teardown"), so we can simply revert it. Note that I kept these two changes together because simply reverting the original commit alone would leave the driver vulnerable to worse race conditions. Fixes: c503e63200c6 ("ice: Stop processing VF messages during teardown") Signed-off-by: Jacob Keller <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-18ice: fix setting l4 port flag when adding filterMichal Swiatkowski1-2/+2
Accidentally filter flag for none encapsulated l4 port field is always set. Even if user wants to add encapsulated l4 port field. Remove this unnecessary flag setting. Fixes: 9e300987d4a81 ("ice: VXLAN and Geneve TC support") Signed-off-by: Michal Swiatkowski <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-18ice: Match on all profiles in slow-pathWojciech Drewek3-1/+5
In switchdev mode, slow-path rules need to match all protocols, in order to correctly redirect unfiltered or missed packets to the uplink. To set this up for the virtual function to uplink flow, the rule that redirects packets to the control VSI must have the tunnel type set to ICE_SW_TUN_AND_NON_TUN. As a result of that new tunnel type being set, ice_get_compat_fv_bitmap will select ICE_PROF_ALL. At that point all profiles would be selected for this rule, resulting in the desired behavior. Without this change slow-path would not work with tunnel protocols. Fixes: 8b032a55c1bd ("ice: low level support for tunnels") Signed-off-by: Wojciech Drewek <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-14ice: enable parsing IPSEC SPI headers for RSSJesse Brandeburg1-0/+6
The COMMS package can enable the hardware parser to recognize IPSEC frames with ESP header and SPI identifier. If this package is available and configured for loading in /lib/firmware, then the driver will succeed in enabling this protocol type for RSS. This in turn allows the hardware to hash over the SPI and use it to pick a consistent receive queue for the same secure flow. Without this all traffic is steered to the same queue for multiple traffic threads from the same IP address. For that reason this is marked as a fix, as the driver supports the model, but it wasn't enabled. If the package is not available, adding this type will fail, but the failure is ignored on purpose as it has no negative affect. Fixes: c90ed40cefe1 ("ice: Enable writing hardware filtering tables") Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-10ice: Avoid RTNL lock when re-creating auxiliary deviceDave Ertman2-1/+5
If a call to re-create the auxiliary device happens in a context that has already taken the RTNL lock, then the call flow that recreates auxiliary device can hang if there is another attempt to claim the RTNL lock by the auxiliary driver. To avoid this, any call to re-create auxiliary devices that comes from an source that is holding the RTNL lock (e.g. netdev notifier when interface exits a bond) should execute in a separate thread. To accomplish this, add a flag to the PF that will be evaluated in the service task and dealt with there. Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA") Signed-off-by: Dave Ertman <[email protected]> Reviewed-by: Jonathan Toppins <[email protected]> Tested-by: Gurucharan G <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-10ice: Fix KASAN error in LAG NETDEV_UNREGISTER handlerDave Ertman1-6/+28
Currently, the same handler is called for both a NETDEV_BONDING_INFO LAG unlink notification as for a NETDEV_UNREGISTER call. This is causing a problem though, since the netdev_notifier_info passed has a different structure depending on which event is passed. The problem manifests as a call trace from a BUG: KASAN stack-out-of-bounds error. Fix this by creating a handler specific to NETDEV_UNREGISTER that only is passed valid elements in the netdev_notifier_info struct for the NETDEV_UNREGISTER event. Also included is the removal of an unbalanced dev_put on the peer_netdev and related braces. Fixes: 6a8b357278f5 ("ice: Respond to a NETDEV_UNREGISTER event for LAG") Signed-off-by: Dave Ertman <[email protected]> Acked-by: Jonathan Toppins <[email protected]> Tested-by: Sunitha Mekala <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-10ice: fix IPIP and SIT TSO offloadJesse Brandeburg2-8/+18
The driver was avoiding offload for IPIP (at least) frames due to parsing the inner header offsets incorrectly when trying to check lengths. This length check works for VXLAN frames but fails on IPIP frames because skb_transport_offset points to the inner header in IPIP frames, which meant the subtraction of transport_header from inner_network_header returns a negative value (-20). With the code before this patch, everything continued to work, but GSO was being used to segment, causing throughputs of 1.5Gb/s per thread. After this patch, throughput is more like 10Gb/s per thread for IPIP traffic. Fixes: e94d44786693 ("ice: Implement filter sync, NDO operations and bump version") Signed-off-by: Jesse Brandeburg <[email protected]> Reviewed-by: Paul Menzel <[email protected]> Tested-by: Gurucharan G <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-10ice: fix an error code in ice_cfg_phy_fec()Dan Carpenter1-1/+2
Propagate the error code from ice_get_link_default_override() instead of returning success. Fixes: ea78ce4dab05 ("ice: add link lenient and default override support") Signed-off-by: Dan Carpenter <[email protected]> Tested-by: Gurucharan G <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-04ixgbevf: Require large buffers for build_skb on 82599VFSamuel Mendoza-Jonas1-6/+7
From 4.17 onwards the ixgbevf driver uses build_skb() to build an skb around new data in the page buffer shared with the ixgbe PF. This uses either a 2K or 3K buffer, and offsets the DMA mapping by NET_SKB_PAD + NET_IP_ALIGN. When using a smaller buffer RXDCTL is set to ensure the PF does not write a full 2K bytes into the buffer, which is actually 2K minus the offset. However on the 82599 virtual function, the RXDCTL mechanism is not available. The driver attempts to work around this by using the SET_LPE mailbox method to lower the maximm frame size, but the ixgbe PF driver ignores this in order to keep the PF and all VFs in sync[0]. This means the PF will write up to the full 2K set in SRRCTL, causing it to write NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the buffer. With 4K pages split into two buffers, this means it either writes NET_SKB_PAD + NET_IP_ALIGN bytes past the first buffer (and into the second), or NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the DMA mapping. Avoid this by only enabling build_skb when using "large" buffers (3K). These are placed in each half of an order-1 page, preventing the PF from writing past the end of the mapping. [0]: Technically it only ever raises the max frame size, see ixgbe_set_vf_lpe() in ixgbe_sriov.c Fixes: f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames") Signed-off-by: Samuel Mendoza-Jonas <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-01Merge branch '1GbE' of ↵Jakub Kicinski3-19/+44
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-01 This series contains updates to e1000e driver only. Sasha removes CSME handshake with TGL platform as this is not supported and is causing hardware unit hangs to be reported. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: Handshake with CSME starts from ADL platforms e1000e: Separate ADP board type from TGP ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-01e1000e: Handshake with CSME starts from ADL platformsSasha Neftin1-2/+4
Handshake with CSME/AMT on none provisioned platforms during S0ix flow is not supported on TGL platform and can cause to HW unit hang. Update the handshake with CSME flow to start from the ADL platform. Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Nechama Kraus <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-01e1000e: Separate ADP board type from TGPSasha Neftin3-17/+40
We have the same LAN controller on different PCH's. Separate ADP board type from a TGP which will allow for specific fixes to be applied for ADP platforms. Suggested-by: Kai-Heng Feng <[email protected]> Suggested-by: Dima Ruinskiy <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Nechama Kraus <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-31i40e: Fix reset path while removing the driverKaren Sornek2-1/+19
Fix the crash in kernel while dereferencing the NULL pointer, when the driver is unloaded and simultaneously the VSI rings are being stopped. The hardware requires 50msec in order to finish RX queues disable. For this purpose the driver spins in mdelay function for the operation to be completed. For example changing number of queues which requires reset would fail in the following call stack: 1) i40e_prep_for_reset 2) i40e_pf_quiesce_all_vsi 3) i40e_quiesce_vsi 4) i40e_vsi_close 5) i40e_down 6) i40e_vsi_stop_rings 7) i40e_vsi_control_rx -> disable requires the delay of 50msecs 8) continue back in i40e_down function where i40e_clean_tx_ring(vsi->tx_rings[i]) is going to crash When the driver was spinning vsi_release called i40e_vsi_free_arrays where the vsi->tx_rings resources were freed and the pointer was set to NULL. Fixes: 5b6d4a7f20b0 ("i40e: Fix crash during removing i40e driver") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Sylwester Dziedziuch <[email protected]> Signed-off-by: Karen Sornek <[email protected]> Tested-by: Gurucharan G <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-31i40e: Fix reset bw limit when DCB enabled with 1 TCJedrzej Jagielski1-1/+11
There was an AQ error I40E_AQ_RC_EINVAL when trying to reset bw limit as part of bw allocation setup. This was caused by trying to reset bw limit with DCB enabled. Bw limit should not be reset when DCB is enabled. The code was relying on the pf->flags to check if DCB is enabled but if only 1 TC is available this flag will not be set even though DCB is enabled. Add a check for number of TC and if it is 1 don't try to reset bw limit even if pf->flags shows DCB as disabled. Fixes: fa38e30ac73f ("i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled") Suggested-by: Alexander Lobakin <[email protected]> # Flatten the condition Signed-off-by: Sylwester Dziedziuch <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Reviewed-by: Alexander Lobakin <[email protected]> Tested-by: Imam Hassan Reza Biswas <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-20i40e: fix unsigned stat widthsJoe Damato3-7/+7
Change i40e_update_vsi_stats and struct i40e_vsi to use u64 fields to match the width of the stats counters in struct i40e_rx_queue_stats. Update debugfs code to use the correct format specifier for u64. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Joe Damato <[email protected]> Reported-by: kernel test robot <[email protected]> Tested-by: Gurucharan G <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-20i40e: Fix for failed to init adminq while VF resetKaren Sornek3-2/+46
Fix for failed to init adminq: -53 while VF is resetting via MAC address changing procedure. Added sync module to avoid reading deadbeef value in reinit adminq during software reset. Without this patch it is possible to trigger VF reset procedure during reinit adminq. This resulted in an incorrect reading of value from the AQP registers and generated the -53 error. Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <[email protected]> Signed-off-by: Karen Sornek <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-20i40e: Fix queues reservation for XDPSylwester Dziedziuch1-0/+14
When XDP was configured on a system with large number of CPUs and X722 NIC there was a call trace with NULL pointer dereference. i40e 0000:87:00.0: failed to get tracking for 256 queues for VSI 0 err -12 i40e 0000:87:00.0: setup of MAIN VSI failed BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:i40e_xdp+0xea/0x1b0 [i40e] Call Trace: ? i40e_reconfig_rss_queues+0x130/0x130 [i40e] dev_xdp_install+0x61/0xe0 dev_xdp_attach+0x18a/0x4c0 dev_change_xdp_fd+0x1e6/0x220 do_setlink+0x616/0x1030 ? ahci_port_stop+0x80/0x80 ? ata_qc_issue+0x107/0x1e0 ? lock_timer_base+0x61/0x80 ? __mod_timer+0x202/0x380 rtnl_setlink+0xe5/0x170 ? bpf_lsm_binder_transaction+0x10/0x10 ? security_capable+0x36/0x50 rtnetlink_rcv_msg+0x121/0x350 ? rtnl_calcit.isra.0+0x100/0x100 netlink_rcv_skb+0x50/0xf0 netlink_unicast+0x1d3/0x2a0 netlink_sendmsg+0x22a/0x440 sock_sendmsg+0x5e/0x60 __sys_sendto+0xf0/0x160 ? __sys_getsockname+0x7e/0xc0 ? _copy_from_user+0x3c/0x80 ? __sys_setsockopt+0xc8/0x1a0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f83fa7a39e0 This was caused by PF queue pile fragmentation due to flow director VSI queue being placed right after main VSI. Because of this main VSI was not able to resize its queue allocation for XDP resulting in no queues allocated for main VSI when XDP was turned on. Fix this by always allocating last queue in PF queue pile for a flow director VSI. Fixes: 41c445ff0f48 ("i40e: main driver core") Fixes: 74608d17fe29 ("i40e: add support for XDP_TX action") Signed-off-by: Sylwester Dziedziuch <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Tested-by: Kiran Bhandare <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-20i40e: Fix issue when maximum queues is exceededJedrzej Jagielski3-13/+61
Before this patch VF interface vanished when maximum queue number was exceeded. Driver tried to add next queues even if there was not enough space. PF sent incorrect number of queues to the VF when there were not enough of them. Add an additional condition introduced to check available space in 'qp_pile' before proceeding. This condition makes it impossible to add queues if they number is greater than the number resulting from available space. Also add the search for free space in PF queue pair piles. Without this patch VF interfaces are not seen when available space for queues has been exceeded and following logs appears permanently in dmesg: "Unable to get VF config (-32)". "VF 62 failed opcode 3, retval: -5" "Unable to get VF config due to PF error condition, not retrying" Fixes: 7daa6bf3294e ("i40e: driver core headers") Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Jaroslaw Gawin <[email protected]> Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-20i40e: Increase delay to 1 s after global EMP resetJedrzej Jagielski1-9/+3
Recently simplified i40e_rebuild causes that FW sometimes is not ready after NVM update, the ping does not return. Increase the delay in case of EMP reset. Old delay of 300 ms was introduced for specific cards for 710 series. Now it works for all the cards and delay was increased. Fixes: 1fa51a650e1d ("i40e: Add delay after EMP reset for firmware to recover") Signed-off-by: Arkadiusz Kubalewski <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Gurucharan G <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-13Merge tag 'irq-core-2022-01-13' of ↵Linus Torvalds3-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Core: - Provide a new interface for affinity hints to provide a separation between hint and actual affinity change which has become a hidden property of the current interface - Fix up the in tree usage of the affinity hint interfaces Drivers: - No new irqchip drivers! - Fix GICv3 redistributor table reservation with RT across kexec - Fix GICv4.1 redistributor view of the VPE table across kexec - Add support for extra interrupts on spear-shirq - Make obtaining some interrupts optional for the Renesas drivers - Various cleanups and bug fixes" * tag 'irq-core-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip/renesas-intc-irqpin: Use platform_get_irq_optional() to get the interrupt irqchip/renesas-irqc: Use platform_get_irq_optional() to get the interrupt irqchip/gic-v4: Disable redistributors' view of the VPE table at boot time irqchip/ingenic-tcu: Use correctly sized arguments for bit field irqchip/gic-v2m: Add const to of_device_id irqchip/imx-gpcv2: Mark imx_gpcv2_instance with __ro_after_init irqchip/spear-shirq: Add support for IRQ 0..6 irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime irqchip/gic-v3-its: Postpone LPI pending table freeing and memreserve irqchip/gic-v3-its: Give the percpu rdist struct its own flags field net/mlx4: Use irq_update_affinity_hint() net/mlx5: Use irq_set_affinity_and_hint() hinic: Use irq_set_affinity_and_hint() scsi: lpfc: Use irq_set_affinity() mailbox: Use irq_update_affinity_hint() ixgbe: Use irq_update_affinity_hint() be2net: Use irq_update_affinity_hint() enic: Use irq_update_affinity_hint() RDMA/irdma: Use irq_update_affinity_hint() scsi: mpt3sas: Use irq_set_affinity_and_hint() ...
2022-01-08Merge branch 'linus' into irq/core, to fix conflictIngo Molnar28-177/+384
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c Signed-off-by: Ingo Molnar <[email protected]>
2022-01-07iavf: remove an unneeded variableJason Wang1-3/+1
The variable `ret_code' used for returning is never changed in function `iavf_shutdown_adminq'. So that it can be removed and just return its initial value 0 at the end of `iavf_shutdown_adminq' function. Signed-off-by: Jason Wang <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-07i40e: remove variables set but not usedYang Li1-5/+0
The code that uses variables pe_cntx_size and pe_filt_size has been removed, so they should be removed as well. Eliminate the following clang warnings: drivers/net/ethernet/intel/i40e/i40e_common.c:4139:20: warning: variable 'pe_filt_size' set but not used. drivers/net/ethernet/intel/i40e/i40e_common.c:4139:6: warning: variable 'pe_cntx_size' set but not used. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Tested-by: Gurucharan G <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-07i40e: Remove non-inclusive languageMateusz Palczewski2-3/+3
Remove non-inclusive language from the driver. Signed-off-by: Aleksandr Loktionov <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-07i40e: Update FW API versionMateusz Palczewski1-2/+2
Update FW API versions to the newest supported NVM images. Signed-off-by: Sylwester Dziedziuch <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Gurucharan G <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-01-07i40e: Minimize amount of busy-waiting during AQ sendJedrzej Jagielski3-14/+35
The i40e_asq_send_command will now use a non blocking usleep_range if possible (non-atomic context), instead of busy-waiting udelay. The usleep_range function uses hrtimers to provide better performance and removes the negative impact of busy-waiting in time-critical environments. 1. Rename i40e_asq_send_command to i40e_asq_send_command_atomic and add 5th parameter to inform if called from an atomic context. Call inside usleep_range (if non-atomic) or udelay (if atomic). 2. Change i40e_asq_send_command to invoke i40e_asq_send_command_atomic(..., false). 3. Change two functions: - i40e_aq_set_vsi_uc_promisc_on_vlan - i40e_aq_set_vsi_mc_promisc_on_vlan to explicitly use i40e_asq_send_command_atomic(..., true) instead of i40e_asq_send_command, as they use spinlocks and do some work in an atomic context. All other calls to i40e_asq_send_command remain unchanged. Signed-off-by: Dawid Lukwinski <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.