aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2023-11-23i40e: Fix adding unsupported cloud filtersIvan Vecera1-7/+9
If a VF tries to add unsupported cloud filter through virtchnl then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but this error code is stored in 'ret' instead of 'aq_ret' that is used as error code sent back to VF. In this scenario where one of the mentioned functions fails the value of 'aq_ret' is zero so the VF will incorrectly receive a 'success'. Use 'aq_ret' to store return value and remove 'ret' local variable. Additionally fix the issue when filter allocation fails, in this case no notification is sent back to the VF. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-23ice: restore timestamp configuration after device resetJacob Keller3-40/+51
The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset() to disable timestamping while the device is resetting. This operation destroys the user requested configuration. While the driver does call ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings after a reset, it unconditionally passes true or false, resulting in failure to restore previous user space configuration. This results in a device reset forcibly disabling timestamp configuration regardless of current user settings. This was not detected previously due to a quirk of the LinuxPTP ptp4l application. If ptp4l detects a missing timestamp, it enters a fault state and performs recovery logic which includes executing SIOCSHWTSTAMP again, restoring the now accidentally cleared configuration. Not every application does this, and for these applications, timestamps will mysteriously stop after a PF reset, without being restored until an application restart. Fix this by replacing ice_ptp_cfg_timestamp() with two new functions: 1) ice_ptp_disable_timestamp_mode() which unconditionally disables the timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release() 2) ice_ptp_restore_timestamp_mode() which calls ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration, calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and issues an immediate TSYN_TX interrupt to ensure that timestamps which may have occurred during the device reset get processed. Modify the ice_ptp_set_timestamp_mode to directly save the user configuration and then call ice_ptp_restore_timestamp_mode. This way, reset no longer destroys the saved user configuration. This obsoletes the ice_set_tx_tstamp() function which can now be safely removed. With this change, all devices should now restore Tx and Rx timestamping functionality correctly after a PF reset without application intervention. Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-11-23ice: unify logic for programming PFINT_TSYN_MSKJacob Keller1-26/+34
Commit d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") modified how Tx timestamps are handled for E822 devices. On these devices, only the clock owner handles reading the Tx timestamp data from firmware. To do this, the PFINT_TSYN_MSK register is modified from the default value to one which enables reacting to a Tx timestamp on all PHY ports. The driver currently programs PFINT_TSYN_MSK in different places depending on whether the port is the clock owner or not. For the clock owner, the PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before calling ice_ptp_tx_ena_intr to program the PHY ports. For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during ice_ptp_init_port. If a large enough device reset occurs, the PFINT_TSYN_MSK register will be reset to the default value in which only the PHY associated directly with the PF will cause the Tx timestamp interrupt to trigger. The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a device reset. For the E822 device, this results in the PF no longer responding to interrupts for other ports. This results in failure to deliver Tx timestamps to user space applications. Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place. This function will program both registers according to the combination of user configuration and device requirements. This ensures that PFINT_TSYN_MSK is always restored when we configure the Tx timestamp interrupt. Fixes: d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") Signed-off-by: Jacob Keller <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-11-23ice: remove ptp_tx ring parameter flagJacob Keller3-18/+0
Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx ring variable to see if timestamping is enabled on that ring. This value is set for all rings whenever userspace configures Tx timestamping. Ostensibly this was done to avoid wasting cycles checking other fields when timestamping has not been enabled. However, for Tx timestamps we already get an individual per-SKB flag indicating whether userspace wants to request a timestamp on that packet. We do not gain much by also having a separate flag to check for whether timestamping was enabled. In fact, the driver currently fails to restore the field after a PF reset. Because of this, if a PF reset occurs, timestamps will be disabled. Since this flag doesn't add value in the hotpath, remove it and always provide a timestamp if the SKB flag has been set. A following change will fix the reset path to properly restore user timestamping configuration completely. This went unnoticed for some time because one of the most common applications using Tx timestamps, ptp4l, will reconfigure the socket as part of its fault recovery logic. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-11-13ice: fix DDP package download for packages without signature segmentDan Nowlin1-3/+100
Commit 3cbdb0343022 ("ice: Add support for E830 DDP package segment") incorrectly removed support for package download for packages without a signature segment. These packages include the signature buffer inline in the configurations buffers, and not in a signature segment. Fix package download by providing download support for both packages with (ice_download_pkg_with_sig_seg()) and without signature segment (ice_download_pkg_without_sig_seg()). Fixes: 3cbdb0343022 ("ice: Add support for E830 DDP package segment") Reported-by: Maciej Fijalkowski <[email protected]> Closes: https://lore.kernel.org/netdev/ZUT50a94kk2pMGKb@boxer/ Tested-by: Maciej Fijalkowski <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Dan Nowlin <[email protected]> Signed-off-by: Paul Greenwalt <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Arpana Arland <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-11-13ice: dpll: fix output pin capabilitiesArkadiusz Kubalewski3-4/+64
The dpll output pins which are used to feed clock signal of PHY and MAC circuits cannot be disconnected, those integrated circuits require clock signal for operation. By stopping assignment of DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE pin capability, prevent the user from invoking the state set callback on those pins, setting the state on those pins already returns error, as firmware doesn't allow the change of their state. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Fixes: 8a3a565ff210 ("ice: add admin commands to access cgu configuration") Reviewed-by: Andrii Staikov <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Sunitha Mekala <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-11-13ice: dpll: fix check for dpll input priority rangeArkadiusz Kubalewski2-7/+0
Supported priority value for input pins may differ with regard of NIC firmware version. E810T NICs with 3.20/4.00 FW versions would accept priority range 0-31, where firmware 4.10+ would support the range 0-9 and extra value of 255. Remove the in-range check as the driver has no information on supported values from the running firmware, let firmware decide if given value is correct and return extack error if the value is not supported. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Sunitha Mekala <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-11-13ice: dpll: fix initial lock status of dpllArkadiusz Kubalewski1-2/+1
When dpll device is registered and dpll subsystem performs notify of a new device, the lock state value provided to dpll subsystem equals 0 which is invalid value for the `enum dpll_lock_status`. Provide correct value by obtaining it from firmware before registering the dpll device. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Signed-off-by: Aleksandr Loktionov <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Sunitha Mekala <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-11-08Merge branch '100GbE' of ↵Jakub Kicinski2-41/+91
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-11-06 (ice) This series contains updates to ice driver only. Dave removes SR-IOV LAG attribute for only the interface being disabled to allow for proper unwinding of all interfaces. Michal Schmidt changes some LAG allocations from GFP_KERNEL to GFP_ATOMIC due to non-allowed sleeping. Aniruddha and Marcin fix redirection and drop rules for switchdev by properly setting and marking egress/ingress type. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix VF-VF direction matching in drop rule in switchdev ice: Fix VF-VF filter rules in switchdev mode ice: lag: in RCU, use atomic allocation ice: Fix SRIOV LAG disable on non-compliant aggregate ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-08Merge branch '40GbE' of ↵Jakub Kicinski2-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-11-06 (i40e) This series contains updates to i40e driver only. Ivan Vecera resolves a couple issues with devlink; removing a call to devlink_port_type_clear() and ensuring devlink port is unregistered after the net device. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Fix devlink port unregistering i40e: Do not call devlink_port_type_clear() ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-06idpf: fix potential use-after-free in idpf_tso()Eric Dumazet1-2/+4
skb_cow_head() can change skb->head (and thus skb_shinfo(skb)) We must not cache skb_shinfo(skb) before skb_cow_head(). Fixes: 6818c4d5b3c2 ("idpf: add splitq start_xmit") Signed-off-by: Eric Dumazet <[email protected]> Cc: Joshua Hay <[email protected]> Cc: Alan Brady <[email protected]> Cc: Madhu Chittim <[email protected]> Cc: Phani Burra <[email protected]> Cc: Sridhar Samudrala <[email protected]> Cc: Willem de Bruijn <[email protected]> Cc: Pavan Kumar Linga <[email protected]> Cc: Tony Nguyen <[email protected]> Cc: Bailey Forrest <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-06ice: Fix VF-VF direction matching in drop rule in switchdevMarcin Szycik1-1/+23
When adding a drop rule on a VF, rule direction is not being set, which results in it always being set to ingress (ICE_ESWITCH_FLTR_INGRESS equals 0). Because of this, drop rules added on port representors don't match any packets. To fix it, set rule direction in drop action to egress when netdev is a port representor, otherwise set it to ingress. Fixes: 0960a27bd479 ("ice: Add direction metadata") Reviewed-by: Michal Swiatkowski <[email protected]> Signed-off-by: Marcin Szycik <[email protected]> Tested-by: Sujai Buvaneswaran <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-11-06ice: Fix VF-VF filter rules in switchdev modeAniruddha Paul1-28/+62
Any packet leaving VSI i.e VF's VSI is considered as egress traffic by HW, thus failing to match the added rule. Mark the direction for redirect rules as below: 1. VF-VF - Egress 2. Uplink-VF - Ingress 3. VF-Uplink - Egress 4. Link_Partner-Uplink - Ingress 5. Link_Partner-VF - Ingress Fixes: 0960a27bd479 ("ice: Add direction metadata") Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Aniruddha Paul <[email protected]> Tested-by: Sujai Buvaneswaran <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-11-06ice: lag: in RCU, use atomic allocationMichal Schmidt1-3/+3
Sleeping is not allowed in RCU read-side critical sections. Use atomic allocations under rcu_read_lock. Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface") Fixes: 41ccedf5ca8f ("ice: implement lag netdev event handler") Fixes: 3579aa86fb40 ("ice: update reset path for SRIOV LAG support") Signed-off-by: Michal Schmidt <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-11-06ice: Fix SRIOV LAG disable on non-compliant aggregateDave Ertman1-9/+3
If an attribute of an aggregate interface disqualifies it from supporting SRIOV, the driver will unwind the SRIOV support. Currently the driver is clearing the feature bit for all interfaces in the aggregate, but this is not allowing the other interfaces to unwind successfully on driver unload. Only clear the feature bit for the interface that is currently unwinding. Fixes: bf65da2eb279 ("ice: enforce interface eligibility and add messaging for SRIOV LAG") Signed-off-by: Dave Ertman <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Sujai Buvaneswaran <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-11-06i40e: Fix devlink port unregisteringIvan Vecera1-4/+6
Ensure that devlink port is unregistered after unregistering of net device. Reproducer: [root@host ~]# rmmod i40e [ 4742.939386] i40e 0000:02:00.1: i40e_ptp_stop: removed PHC on enp2s0f1np1 [ 4743.059269] ------------[ cut here ]------------ [ 4743.063900] WARNING: CPU: 21 PID: 10766 at net/devlink/port.c:1078 devl_port_unregister+0x69/0x80 ... Fixes: 9e479d64dc58 ("i40e: Add initial devlink support") Signed-off-by: Ivan Vecera <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-11-06i40e: Do not call devlink_port_type_clear()Ivan Vecera1-1/+0
Do not call devlink_port_type_clear() prior devlink port unregister and let devlink core to take care about it. Reproducer: [root@host ~]# rmmod i40e [ 4539.964699] i40e 0000:02:00.0: devlink port type for port 0 cleared without a software interface reference, device type not supported by the kernel? [ 4540.319811] i40e 0000:02:00.1: devlink port type for port 1 cleared without a software interface reference, device type not supported by the kernel? Fixes: 9e479d64dc58 ("i40e: Add initial devlink support") Signed-off-by: Ivan Vecera <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-10-27iavf: delete the iavf client interfaceMichal Schmidt6-871/+1
The iavf client interface was added in 2017 by commit ed0e894de7c1 ("i40evf: add client interface"), but there have never been any in-tree callers. It's not useful for future development either. The Intel out-of-tree iavf and irdma drivers instead use an auxiliary bus, which is a better solution. Remove the iavf client interface code. Also gone are the client_task work and the client_lock mutex. Signed-off-by: Michal Schmidt <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-27iavf: add a common function for undoing the interrupt schemeMichal Schmidt1-11/+15
Add a new function iavf_free_interrupt_scheme that does the inverse of iavf_init_interrupt_scheme. Symmetry is nice. And there will be three callers already. Signed-off-by: Michal Schmidt <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-27iavf: use unregister_netdevMichal Schmidt1-3/+1
Use unregister_netdev, which takes rtnl_lock for us. We don't have to check the reg_state under rtnl_lock. There's nothing to race with. We have just cancelled the finish_config work. Signed-off-by: Michal Schmidt <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-27iavf: rely on netdev's own registered stateMichal Schmidt2-7/+3
The information whether a netdev has been registered is already present in the netdev itself. There's no need for a driver flag with the same meaning. Signed-off-by: Michal Schmidt <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-27iavf: fix the waiting time for initial resetMichal Schmidt1-1/+1
Every time I create VFs on ice, I receive at least one "Device is still in reset (-16), retrying" message per VF. It recovers fine, but typical usecases should not trigger scary-looking messages. The waiting for reset is too short. It makes no sense to check every 10 microseconds. Typical reset waiting times are at least tens of milliseconds and can be several seconds. I suspect the polling interval was meant to be 10 milliseconds all along. IAVF_RESET_WAIT_COMPLETE_COUNT is defined as 2000, so the total waiting time could be over 20 seconds. I have seen resets take 5 seconds (with 128 VFs on ice). The added benefit of not triggering the "Device is still in reset" path is that we avoid going through the __IAVF_INIT_FAILED state, which would take a full second before retrying. Signed-off-by: Michal Schmidt <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-27iavf: in iavf_down, don't queue watchdog_task if comms failedMichal Schmidt1-2/+4
The reason for queueing watchdog_task is to have it process the aq_required flags that are being set here. If comms failed, there's nothing to do, so return early. Signed-off-by: Michal Schmidt <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-27iavf: simplify mutex_trylock+sleep loopsMichal Schmidt1-4/+2
This pattern appears in two places in the iavf source code: while (!mutex_trylock(...)) usleep_range(...); That's just mutex_lock with extra steps. The pattern is a leftover from when iavf used bit flags instead of mutexes for locking. Commit 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") replaced test_and_set_bit with !mutex_trylock, preserving the pattern. Simplify it to mutex_lock. Signed-off-by: Michal Schmidt <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-27iavf: fix comments about old bit locksMichal Schmidt1-2/+2
Bit lock __IAVF_IN_CRITICAL_TASK does not exist anymore since commit 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections"). Adjust the comments accordingly. Signed-off-by: Michal Schmidt <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-26ice: Hook up 4 E830 devices by adding their IDsPawel Chmielewski1-0/+4
As the previous patches provide support for E830 hardware, add E830 specific IDs to the PCI device ID table, so these devices can now be probed by the kernel. Reviewed-by: Jesse Brandeburg <[email protected]> Signed-off-by: Pawel Chmielewski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Paul Greenwalt <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-26ice: Remove redundant zeroing of the fields.Pawel Chmielewski1-27/+27
Remove zeroing of the fields, as all the fields are in fact initialized with zeros automatically Reviewed-by: Jesse Brandeburg <[email protected]> Signed-off-by: Pawel Chmielewski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Paul Greenwalt <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-26ice: Add support for E830 DDP package segmentDan Nowlin3-74/+382
Add support for E830 DDP package segment. For the E830 package, signature buffers will not be included inline in the configuration buffers. Instead, the signature buffers will be located in a signature segment. Reviewed-by: Jesse Brandeburg <[email protected]> Signed-off-by: Dan Nowlin <[email protected]> Co-developed-by: Paul Greenwalt <[email protected]> Signed-off-by: Paul Greenwalt <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-26ice: Add ice_get_link_status_datalenPaul Greenwalt2-6/+53
The Get Link Status data length can vary with different versions of ice_aqc_get_link_status_data. Add ice_get_link_status_datalen() to return datalen for the specific ice_aqc_get_link_status_data version. Add new link partner fields to ice_aqc_get_link_status_data; PHY type, FEC, and flow control. Reviewed-by: Jesse Brandeburg <[email protected]> Co-developed-by: Pawel Chmielewski <[email protected]> Signed-off-by: Pawel Chmielewski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Paul Greenwalt <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-26ice: Add 200G speed/phy type useAlice Michael4-3/+43
Add the support for 200G phy speeds and the mapping for their advertisement in link. Add the new PHY type bits for AQ command, as needed for 200G E830 controllers. Signed-off-by: Alice Michael <[email protected]> Co-developed-by: Pawel Chmielewski <[email protected]> Signed-off-by: Pawel Chmielewski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Paul Greenwalt <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-26ice: Add E830 device IDs, MAC type and registersPaul Greenwalt7-61/+141
E830 is the 200G NIC family which uses the ice driver. Add specific E830 registers. Embed macros to use proper register based on (hw)->mac_type & name those macros to [ORIGINAL]_BY_MAC(hw). Registers only available on one of the macs will need to be explicitly referred to as E800_NAME instead of just NAME. PTP is not yet supported. Co-developed-by: Milena Olech <[email protected]> Signed-off-by: Milena Olech <[email protected]> Co-developed-by: Dan Nowlin <[email protected]> Signed-off-by: Dan Nowlin <[email protected]> Co-developed-by: Scott Taylor <[email protected]> Signed-off-by: Scott Taylor <[email protected]> Co-developed-by: Pawel Chmielewski <[email protected]> Signed-off-by: Pawel Chmielewski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Paul Greenwalt <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-26/+57
Cross-merge networking fixes after downstream PR. Conflicts: net/mac80211/rx.c 91535613b609 ("wifi: mac80211: don't drop all unprotected public action frames") 6c02fab72429 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value") Adjacent changes: drivers/net/ethernet/apm/xgene/xgene_enet_main.c 61471264c018 ("net: ethernet: apm: Convert to platform remove callback returning void") d2ca43f30611 ("net: xgene: Fix unused xgene_enet_of_match warning for !CONFIG_OF") net/vmw_vsock/virtio_transport.c 64c99d2d6ada ("vsock/virtio: support to send non-linear skb") 53b08c498515 ("vsock/virtio: initialize the_virtio_vsock before using VQs") Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-25iavf: in iavf_down, disable queues when removing the driverMichal Schmidt1-1/+1
In iavf_down, we're skipping the scheduling of certain operations if the driver is being removed. However, the IAVF_FLAG_AQ_DISABLE_QUEUES request must not be skipped in this case, because iavf_close waits for the transition to the __IAVF_DOWN state, which happens in iavf_virtchnl_completion after the queues are released. Without this fix, "rmmod iavf" takes half a second per interface that's up and prints the "Device resources not yet released" warning. Fixes: c8de44b577eb ("iavf: do not process adminq tasks when __IAVF_IN_REMOVE_TASK is set") Signed-off-by: Michal Schmidt <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Tested-by: Jacob Keller <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-24i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITRIvan Vecera1-1/+1
The I40E_TXR_FLAGS_WB_ON_ITR is i40e_ring flag and not i40e_pf one. Fixes: 8e0764b4d6be42 ("i40e/i40evf: Add support for writeback on ITR feature for X722") Signed-off-by: Ivan Vecera <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23page_pool: remove PP_FLAG_PAGE_FRAGYunsheng Lin1-3/+0
PP_FLAG_PAGE_FRAG is not really needed after pp_frag_count handling is unified and page_pool_alloc_frag() is supported in 32-bit arch with 64-bit DMA, so remove it. Signed-off-by: Yunsheng Lin <[email protected]> CC: Lorenzo Bianconi <[email protected]> CC: Alexander Duyck <[email protected]> CC: Liang Chen <[email protected]> CC: Alexander Lobakin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23idpf: cancel mailbox work in error pathPavan Kumar Linga1-0/+1
In idpf_vc_core_init, the mailbox work is queued on a mailbox workqueue but it is not cancelled on error. This results in a call trace when idpf_mbx_task tries to access the freed mailbox queue pointer. Fix it by cancelling the mailbox work in the error path. Fixes: 4930fbf419a7 ("idpf: add core init and interrupt request") Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Pavan Kumar Linga <[email protected]> Tested-by: Krishneil Singh <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23idpf: set scheduling mode for completion queueMichal Kubiak2-3/+15
The HW must be programmed differently for queue-based scheduling mode. To program the completion queue context correctly, the control plane must know the scheduling mode not only for the Tx queue, but also for the completion queue. Unfortunately, currently the driver sets the scheduling mode only for the Tx queues. Propagate the scheduling mode data for the completion queue as well when sending the queue configuration messages. Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues") Reviewed-by: Alexander Lobakin <[email protected]> Signed-off-by: Michal Kubiak <[email protected]> Reviewed-by: Alan Brady <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Tested-by: Krishneil Singh <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-20i40e: sync next_to_clean and next_to_process for programming status descTirthendu Sarkar1-1/+8
When a programming status desc is encountered on the rx_ring, next_to_process is bumped along with cleaned_count but next_to_clean is not. This causes I40E_DESC_UNUSED() macro to misbehave resulting in overwriting whole ring with new buffers. Update next_to_clean to point to next_to_process on seeing a programming status desc if not in the middle of handling a multi-frag packet. Also, bump cleaned_count only for such case as otherwise next_to_clean buffer may be returned to hardware on reaching clean_threshold. Fixes: e9031f2da1ae ("i40e: introduce next_to_process to i40e_ring") Suggested-by: Maciej Fijalkowski <[email protected]> Reported-by: [email protected] Reported by: Solomon Peachy <[email protected]> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217678 Tested-by: [email protected] Tested by: Indrek Järve <[email protected]> Signed-off-by: Tirthendu Sarkar <[email protected]> Tested-by: Arpana Arland <[email protected]> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-20igc: Fix ambiguity in the ethtool advertisingSasha Neftin1-10/+25
The 'ethtool_convert_link_mode_to_legacy_u32' method does not allow us to advertise 2500M speed support and TP (twisted pair) properly. Convert to 'ethtool_link_ksettings_test_link_mode' to advertise supported speed and eliminate ambiguity. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Suggested-by: Dima Ruinskiy <[email protected]> Suggested-by: Vitaly Lifshits <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-20igb: Fix potential memory leak in igb_add_ethtool_nfc_entryMateusz Palczewski1-1/+5
Add check for return of igb_update_ethtool_nfc_entry so that in case of any potential errors the memory alocated for input will be freed. Fixes: 0e71def25281 ("igb: add support of RX network flow classification") Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Arpana Arland <[email protected]> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ixgbe: fix end of loop test in ixgbe_set_vf_macvlan()Dan Carpenter1-9/+10
The list iterator in a list_for_each_entry() loop can never be NULL. If the loop exits without hitting a break then the iterator points to an offset off the list head and dereferencing it is an out of bounds access. Before we transitioned to using list_for_each_entry() loops, then it was possible for "entry" to be NULL and the comments mention this. I have updated the comments to match the new code. Fixes: c1fec890458a ("ethernet/intel: Use list_for_each_entry() helper") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20igb: Fix an end of loop testDan Carpenter1-3/+6
When we exit a list_for_each_entry() without hitting a break statement, the list iterator isn't NULL, it just point to an offset off the list_head. In that situation, it wouldn't be too surprising for entry->free to be true and we end up corrupting memory. The way to test for these is to just set a flag. Fixes: c1fec890458a ("ethernet/intel: Use list_for_each_entry() helper") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: cleanup ice_find_netlist_nodeJacob Keller1-15/+15
The ice_find_netlist_node function was introduced in commit 8a3a565ff210 ("ice: add admin commands to access cgu configuration"). Variations of this function were reviewed concurrently on both intel-wired-lan[1][2], and netdev [3][4] [1]: https://lore.kernel.org/intel-wired-lan/[email protected]/ [2]: https://lore.kernel.org/intel-wired-lan/[email protected]/ [3]: https://lore.kernel.org/netdev/[email protected]/ [4]: https://lore.kernel.org/netdev/[email protected]/ The variant I posted had a few changes due to review feedback which were never incorporated into the DPLL series: * Replace the references to ancient and long removed ICE_SUCCESS and ICE_ERR_DOES_NOT_EXIST status codes in the function comment. * Return -ENOENT instead of -ENOTBLK, as a more common way to indicate that an entry doesn't exist. * Avoid the use of memset() and use simple static initialization for the cmd variable. * Use FIELD_PREP to assign the node_type_ctx. * Remove an unnecessary local variable to keep track of rec_node_handle, just pass the node_handle pointer directly into ice_aq_get_netlist_node. Signed-off-by: Jacob Keller <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Reviewed-by: Paul Menzel <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: make ice_get_pf_c827_idx staticJacob Keller2-2/+1
The ice_get_pf_c827_idx function is only called inside of ice_ptp_hw.c, so there is no reason to export it. Mark it static and remove the declaration from ice_ptp_hw.h Signed-off-by: Jacob Keller <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: manage VFs MSI-X using resource trackingMichal Swiatkowski1-19/+151
Track MSI-X for VFs using bitmap, by setting and clearing bitmap during allocation and freeing. Try to linearize irqs usage for VFs, by freeing them and allocating once again. Do it only for VFs that aren't currently running. Signed-off-by: Michal Swiatkowski <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: set MSI-X vector count on VFMichal Swiatkowski3-0/+84
Implement ops needed to set MSI-X vector count on VF. sriov_get_vf_total_msix() should return total number of MSI-X that can be used by the VFs. Return the value set by devlink resources API (pf->req_msix.vf). sriov_set_msix_vec_count() will set number of MSI-X on particular VF. Disable VF register mapping, rebuild VSI with new MSI-X and queues values and enable new VF register mapping. For best performance set number of queues equal to number of MSI-X. Signed-off-by: Michal Swiatkowski <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: add bitmap to track VF MSI-X usageMichal Swiatkowski2-0/+11
Create a bitamp to track MSI-X usage for VFs. The bitmap has the size of total MSI-X amount on device, because at init time the amount of MSI-X used by VFs isn't known. The bitmap is used in follow up patchset to provide a block of continuous block of MSI-X indexes for each created VF. Signed-off-by: Michal Swiatkowski <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: implement num_msix field per VFMichal Swiatkowski4-7/+14
Store the amount of MSI-X per VF instead of storing it in pf struct. It is used to calculate number of q_vectors (and queues) for VF VSI. This is necessary because with follow up changes the number of MSI-X can be different between VFs. Use it instead of using pf->vf_msix value in all cases. Signed-off-by: Michal Swiatkowski <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: store VF's pci_dev ptr in ice_vfPrzemek Kitszel5-28/+32
Extend struct ice_vf by vfdev. Calculation of vfdev falls more nicely into ice_create_vf_entries(). Caching of vfdev enables simplification of ice_restore_all_vfs_msi_state(). Reviewed-by: Jesse Brandeburg <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Przemek Kitszel <[email protected]> Co-developed-by: Mateusz Polchlopek <[email protected]> Signed-off-by: Mateusz Polchlopek <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: add drop rule matching on not active lportMichal Swiatkowski3-20/+75
Inactive LAG port should not receive any packets, as it can cause adding invalid FDBs (bridge offload). Add a drop rule matching on inactive lport in LAG. Reviewed-by: Simon Horman <[email protected]> Co-developed-by: Marcin Szycik <[email protected]> Signed-off-by: Marcin Szycik <[email protected]> Signed-off-by: Michal Swiatkowski <[email protected]> Tested-by: Sujai Buvaneswaran <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.