aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2021-12-06i40e: Fix pre-set max number of queues for VFMateusz Palczewski1-5/+0
After setting pre-set combined to 16 queues and reserving 16 queues by tc qdisc, pre-set maximum combined queues returned to default value after VF reset being 4 and this generated errors during removing tc. Fixed by removing clear num_req_queues before reset VF. Fixes: e284fc280473 (i40e: Add and delete cloud filter) Signed-off-by: Grzegorz Szczurek <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Bindushree P <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-06i40e: Fix failed opcode appearing if handling messages from VFKaren Sornek2-22/+50
Fix failed operation code appearing if handling messages from VF. Implemented by waiting for VF appropriate state if request starts handle while VF reset. Without this patch the message handling request while VF is in a reset state ends with error -5 (I40E_ERR_PARAM). Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <[email protected]> Signed-off-by: Karen Sornek <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-06iavf: Fix reporting when setting descriptor countMichal Maloszewski1-11/+32
iavf_set_ringparams doesn't communicate to the user that 1. The user requested descriptor count is out of range. Instead it just quietly sets descriptors to the "clamped" value and calls it done. This makes it look an invalid value was successfully set as the descriptor count when this isn't actually true. 2. The user provided descriptor count needs to be inflated for alignment reasons. This behavior is confusing. The ice driver has already addressed this by rejecting invalid values for descriptor count and messaging for alignment adjustments. Do the same thing here by adding the error and info messages. Fixes: fbb7ddfef253 ("i40evf: core ethtool functionality") Signed-off-by: Anirudh Venkataramanan <[email protected]> Signed-off-by: Michal Maloszewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-01iavf: restore MSI state on resetMitch Williams1-0/+1
If the PF experiences an FLR, the VF's MSI and MSI-X configuration will be conveniently and silently removed in the process. When this happens, reset recovery will appear to complete normally but no traffic will pass. The netdev watchdog will helpfully notify everyone of this issue. To prevent such public embarrassment, restore MSI configuration at every reset. For normal resets, this will do no harm, but for VF resets resulting from a PF FLR, this will keep the VF working. Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Mitch Williams <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-01Merge branch '40GbE' of ↵David S. Miller5-44/+69
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2021-11-30 This series contains updates to iavf driver only. Patryk adds a debug message when MTU is changed. Grzegorz adds messaging when transitioning in and out of multicast promiscuous mode. Jake returns correct error codes for iavf_parse_cls_flower(). Jedrzej adds messaging for when the driver is removed and refactors struct usage to take less memory. He also adjusts ethtool statistics to only display information on active queues. Tony allows for user to specify the RSS hash. Karen resolves some static analysis warnings, corrects format specifiers, and rewords a message to come across as informational. v2: - Dropped patch 1 (for net) and 5 - Change MTU message from info to debug ==================== Signed-off-by: David S. Miller <[email protected]>
2021-12-01Merge branch '100GbE' of ↵David S. Miller2-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-11-30 This series contains updates to ice driver only. Shiraz corrects assignment of boolean variable and removes an unused enum. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-11-30iavf: Fix displaying queue statistics shown by ethtoolJedrzej Jagielski1-11/+19
Driver provided too many lines as an output to ethtool -S command. Return actual length of string set of ethtool stats. Instead of predefined maximal value use the actual value on netdev, iterate over active queues. Without this patch, ethtool -S report would produce additional erroneous lines of queues that are not configured. Signed-off-by: Witold Fijalkowski <[email protected]> Signed-off-by: Przemyslaw Patynowski <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-30iavf: Refactor string format to avoid static analysis warningsKaren Sornek2-4/+4
Change format to match variable type that is used in string. Use %u format for unsigned variable and %d format for signed variable to remove static analysis warnings. Signed-off-by: Michal Swiatkowski <[email protected]> Signed-off-by: Karen Sornek <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-30iavf: Refactor text of informational messageKaren Sornek1-1/+1
This message is intended to be informational to indicate a reset is about to happen, but the use of "warning" in the message text can cause concern with users. Reword the message to make it less alarming. Signed-off-by: Bruce Allan <[email protected]> Signed-off-by: Karen Sornek <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-30iavf: Fix static code analysis warningKaren Sornek1-1/+1
Change min() to min_t() to fix static code analysis warning of possible overflow. Signed-off-by: Paul Greenwalt <[email protected]> Signed-off-by: Karen Sornek <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-30iavf: Refactor iavf_mac_filter struct memory usageJedrzej Jagielski1-3/+7
iavf_mac_filter struct contained couple boolean flags using up more memory than is necessary. Change the flags to be bitfields in an anonymous struct so all the flags now fit in one byte. Signed-off-by: Sylwester Dziedziuch <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-30iavf: Enable setting RSS hash keyTony Nguyen1-8/+10
Driver support for changing the RSS hash key exists, however, checks have caused it to be reported as unsupported. Remove the check and allow the hash key to be specified. Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Tony Brelinski <[email protected]>
2021-11-30iavf: Add trace while removing deviceJedrzej Jagielski1-0/+1
Add kernel trace that device was removed. Currently there is no such information. I.e. Host admin removes a PCI device from a VM, than on VM shall be info about the event. This patch adds info log to iavf_remove function. Signed-off-by: Arkadiusz Kubalewski <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-30iavf: return errno code instead of status codeJacob Keller1-10/+10
The iavf_parse_cls_flower function returns an integer error code, and not an iavf_status enumeration. Fix the function to use the standard errno value EINVAL as its return instead of using IAVF_ERR_CONFIG. Signed-off-by: Jacob Keller <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-30iavf: Log info when VF is entering and leaving Allmulti modeGrzegorz Szczurek1-6/+14
Add log when VF is entering and leaving Allmulti mode. The change of VF state is visible in dmesg now. Without this commit, entering and leaving Allmulti mode is not logged in dmesg. Signed-off-by: Grzegorz Szczurek <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-30iavf: Add change MTU messagePatryk Małek1-0/+2
Add a netdev_dbg log entry in case of a change of MTU so that user is notified about this change in the same manner as in case of pf driver. Signed-off-by: Patryk Małek <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-30igc: enable XDP metadata in driverJesper Dangaard Brouer1-11/+22
Enabling the XDP bpf_prog access to data_meta area is a very small change. Hint passing 'true' to xdp_prepare_buff(). The SKB layers can also access data_meta area, which required more driver changes to support. Reviewers, notice the igc driver have two different functions that can create SKBs, depending on driver config. Hint for testers, ethtool priv-flags legacy-rx enables the function igc_construct_skb() ethtool --set-priv-flags DEV legacy-rx on Signed-off-by: Jesper Dangaard Brouer <[email protected]> Tested-by: Nechama Kraus <[email protected]> Reviewed-by: Alexander Lobakin <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-30igc: AF_XDP zero-copy metadata adjust breaks SKBs on XDP_PASSJesper Dangaard Brouer1-1/+3
Driver already implicitly supports XDP metadata access in AF_XDP zero-copy mode, as xsk_buff_pool's xp_alloc() naturally set xdp_buff data_meta equal data. This works fine for XDP and AF_XDP, but if a BPF-prog adjust via bpf_xdp_adjust_meta() and choose to call XDP_PASS, then igc function igc_construct_skb_zc() will construct an invalid SKB packet. The function correctly include the xdp->data_meta area in the memcpy, but forgot to pull header to take metasize into account. Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy") Signed-off-by: Jesper Dangaard Brouer <[email protected]> Tested-by: Nechama Kraus <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-30net/ice: Remove unused enumShiraz Saleem1-4/+0
Remove ice_devlink_param_id enum as its not used. Suggested-by: Parav Pandit <[email protected]> Signed-off-by: Shiraz Saleem <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-30net/ice: Fix boolean assignmentShiraz Saleem1-1/+1
vbool in ice_devlink_enable_roce_get can be assigned to a non-0/1 constant. Fix this assignment of vbool to be 0/1. Fixes: e523af4ee560 ("net/ice: Add support for enable_iwarp and enable_roce devlink param") Suggested-by: Parav Pandit <[email protected]> Signed-off-by: Shiraz Saleem <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-30ice: xsk: clear status_error0 for each allocated descMaciej Fijalkowski1-0/+1
Fix a bug in which the receiving of packets can stop in the zero-copy driver. Ice HW ignores 3 lower bits from QRX_TAIL register, which means that tail is bumped only on intervals of 8. Currently with XSK RX batching in place, ice_alloc_rx_bufs_zc() clears the status_error0 only of the last descriptor that has been allocated/taken from the XSK buffer pool. status_error0 includes DD bit that is looked upon by the ice_clean_rx_irq_zc() to tell if a descriptor can be processed. The bug can be triggered when driver updates the ntu but not the QRX_TAIL, so HW wouldn't have a chance to write to the ready descriptors. Later on driver moves the ntc to the mentioned set of descriptors and interprets them as a ready to be processed, since corresponding DD bits were not cleared nor any writeback has happened that would clear it. This can then lead to ntc == ntu case which means that ring is empty and no further packet processing. Fix the XSK traffic hang that can be observed when l2fwd scenario from xdpsock is used by making sure that status_error0 is cleared for each descriptor that is fed to HW and therefore we are sure that driver will not processed non-valid DD bits. This will also prevent the driver from processing the descriptors that were allocated in favor of the previously processed ones, but writeback didn't happen yet. Fixes: db804cfc21e9 ("ice: Use the xsk batched rx allocation interface") Signed-off-by: Maciej Fijalkowski <[email protected]> Reviewed-by: Alexander Lobakin <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski7-33/+137
drivers/net/ipa/ipa_main.c 8afc7e471ad3 ("net: ipa: separate disabling setup from modem stop") 76b5fbcd6b47 ("net: ipa: kill ipa_modem_init()") Duplicated include, drop one. Signed-off-by: Jakub Kicinski <[email protected]>
2021-11-25igb: fix netpoll exit with trafficJesse Brandeburg1-1/+1
Oleksandr brought a bug report where netpoll causes trace messages in the log on igb. Danielle brought this back up as still occurring, so we'll try again. [22038.710800] ------------[ cut here ]------------ [22038.710801] igb_poll+0x0/0x1440 [igb] exceeded budget in poll [22038.710802] WARNING: CPU: 12 PID: 40362 at net/core/netpoll.c:155 netpoll_poll_dev+0x18a/0x1a0 As Alex suggested, change the driver to return work_done at the exit of napi_poll, which should be safe to do in this driver because it is not polling multiple queues in this single napi context (multiple queues attached to one MSI-X vector). Several other drivers contain the same simple sequence, so I hope this will not create new problems. Fixes: 16eb8815c235 ("igb: Refactor clean_rx_irq to reduce overhead and improve performance") Reported-by: Oleksandr Natalenko <[email protected]> Reported-by: Danielle Ratson <[email protected]> Suggested-by: Alexander Duyck <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Oleksandr Natalenko <[email protected]> Tested-by: Danielle Ratson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-11-22net/ice: Add support for enable_iwarp and enable_roce devlink paramShiraz Saleem5-3/+161
Allow support for 'enable_iwarp' and 'enable_roce' devlink params to turn on/off iWARP or RoCE protocol support for E800 devices. For example, a user can turn on iWARP functionality with, devlink dev param set pci/0000:07:00.0 name enable_iwarp value true cmode runtime This add an iWARP auxiliary rdma device, ice.iwarp.<>, under this PF. A user request to enable both iWARP and RoCE under the same PF is rejected since this device does not support both protocols simultaneously on the same port. Signed-off-by: Shiraz Saleem <[email protected]> Tested-by: Leszek Kaliszczuk <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-22ice: avoid bpf_prog refcount underflowMarta Plantykow1-1/+17
Ice driver has the routines for managing XDP resources that are shared between ndo_bpf op and VSI rebuild flow. The latter takes place for example when user changes queue count on an interface via ethtool's set_channels(). There is an issue around the bpf_prog refcounting when VSI is being rebuilt - since ice_prepare_xdp_rings() is called with vsi->xdp_prog as an argument that is used later on by ice_vsi_assign_bpf_prog(), same bpf_prog pointers are swapped with each other. Then it is also interpreted as an 'old_prog' which in turn causes us to call bpf_prog_put on it that will decrement its refcount. Below splat can be interpreted in a way that due to zero refcount of a bpf_prog it is wiped out from the system while kernel still tries to refer to it: [ 481.069429] BUG: unable to handle page fault for address: ffffc9000640f038 [ 481.077390] #PF: supervisor read access in kernel mode [ 481.083335] #PF: error_code(0x0000) - not-present page [ 481.089276] PGD 100000067 P4D 100000067 PUD 1001cb067 PMD 106d2b067 PTE 0 [ 481.097141] Oops: 0000 [#1] PREEMPT SMP PTI [ 481.101980] CPU: 12 PID: 3339 Comm: sudo Tainted: G OE 5.15.0-rc5+ #1 [ 481.110840] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016 [ 481.122021] RIP: 0010:dev_xdp_prog_id+0x25/0x40 [ 481.127265] Code: 80 00 00 00 00 0f 1f 44 00 00 89 f6 48 c1 e6 04 48 01 fe 48 8b 86 98 08 00 00 48 85 c0 74 13 48 8b 50 18 31 c0 48 85 d2 74 07 <48> 8b 42 38 8b 40 20 c3 48 8b 96 90 08 00 00 eb e8 66 2e 0f 1f 84 [ 481.148991] RSP: 0018:ffffc90007b63868 EFLAGS: 00010286 [ 481.155034] RAX: 0000000000000000 RBX: ffff889080824000 RCX: 0000000000000000 [ 481.163278] RDX: ffffc9000640f000 RSI: ffff889080824010 RDI: ffff889080824000 [ 481.171527] RBP: ffff888107af7d00 R08: 0000000000000000 R09: ffff88810db5f6e0 [ 481.179776] R10: 0000000000000000 R11: ffff8890885b9988 R12: ffff88810db5f4bc [ 481.188026] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 481.196276] FS: 00007f5466d5bec0(0000) GS:ffff88903fb00000(0000) knlGS:0000000000000000 [ 481.205633] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 481.212279] CR2: ffffc9000640f038 CR3: 000000014429c006 CR4: 00000000003706e0 [ 481.220530] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 481.228771] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 481.237029] Call Trace: [ 481.239856] rtnl_fill_ifinfo+0x768/0x12e0 [ 481.244602] rtnl_dump_ifinfo+0x525/0x650 [ 481.249246] ? __alloc_skb+0xa5/0x280 [ 481.253484] netlink_dump+0x168/0x3c0 [ 481.257725] netlink_recvmsg+0x21e/0x3e0 [ 481.262263] ____sys_recvmsg+0x87/0x170 [ 481.266707] ? __might_fault+0x20/0x30 [ 481.271046] ? _copy_from_user+0x66/0xa0 [ 481.275591] ? iovec_from_user+0xf6/0x1c0 [ 481.280226] ___sys_recvmsg+0x82/0x100 [ 481.284566] ? sock_sendmsg+0x5e/0x60 [ 481.288791] ? __sys_sendto+0xee/0x150 [ 481.293129] __sys_recvmsg+0x56/0xa0 [ 481.297267] do_syscall_64+0x3b/0xc0 [ 481.301395] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 481.307238] RIP: 0033:0x7f5466f39617 [ 481.311373] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb bd 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2f 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 481.342944] RSP: 002b:00007ffedc7f4308 EFLAGS: 00000246 ORIG_RAX: 000000000000002f [ 481.361783] RAX: ffffffffffffffda RBX: 00007ffedc7f5460 RCX: 00007f5466f39617 [ 481.380278] RDX: 0000000000000000 RSI: 00007ffedc7f5360 RDI: 0000000000000003 [ 481.398500] RBP: 00007ffedc7f53f0 R08: 0000000000000000 R09: 000055d556f04d50 [ 481.416463] R10: 0000000000000077 R11: 0000000000000246 R12: 00007ffedc7f5360 [ 481.434131] R13: 00007ffedc7f5350 R14: 00007ffedc7f5344 R15: 0000000000000e98 [ 481.451520] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mxm_wmi mei_me coretemp mei ipmi_si ipmi_msghandler wmi acpi_pad acpi_power_meter ip_tables x_tables autofs4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel ahci crypto_simd cryptd libahci lpc_ich [last unloaded: ice] [ 481.528558] CR2: ffffc9000640f038 [ 481.542041] ---[ end trace d1f24c9ecf5b61c1 ]--- Fix this by only calling ice_vsi_assign_bpf_prog() inside ice_prepare_xdp_rings() when current vsi->xdp_prog pointer is NULL. This way set_channels() flow will not attempt to swap the vsi->xdp_prog pointers with itself. Also, sprinkle around some comments that provide a reasoning about correlation between driver and kernel in terms of bpf_prog refcount. Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Alexander Lobakin <[email protected]> Signed-off-by: Marta Plantykow <[email protected]> Co-developed-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Kiran Bhandare <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-22ice: fix vsi->txq_map sizingMaciej Fijalkowski1-2/+7
The approach of having XDP queue per CPU regardless of user's setting exposed a hidden bug that could occur in case when Rx queue count differ from Tx queue count. Currently vsi->txq_map's size is equal to the doubled vsi->alloc_txq, which is not correct due to the fact that XDP rings were previously based on the Rx queue count. Below splat can be seen when ethtool -L is used and XDP rings are configured: [ 682.875339] BUG: kernel NULL pointer dereference, address: 000000000000000f [ 682.883403] #PF: supervisor read access in kernel mode [ 682.889345] #PF: error_code(0x0000) - not-present page [ 682.895289] PGD 0 P4D 0 [ 682.898218] Oops: 0000 [#1] PREEMPT SMP PTI [ 682.903055] CPU: 42 PID: 2878 Comm: ethtool Tainted: G OE 5.15.0-rc5+ #1 [ 682.912214] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016 [ 682.923380] RIP: 0010:devres_remove+0x44/0x130 [ 682.928527] Code: 49 89 f4 55 48 89 fd 4c 89 ff 53 48 83 ec 10 e8 92 b9 49 00 48 8b 9d a8 02 00 00 48 8d 8d a0 02 00 00 49 89 c2 48 39 cb 74 0f <4c> 3b 63 10 74 25 48 8b 5b 08 48 39 cb 75 f1 4c 89 ff 4c 89 d6 e8 [ 682.950237] RSP: 0018:ffffc90006a679f0 EFLAGS: 00010002 [ 682.956285] RAX: 0000000000000286 RBX: ffffffffffffffff RCX: ffff88908343a370 [ 682.964538] RDX: 0000000000000001 RSI: ffffffff81690d60 RDI: 0000000000000000 [ 682.972789] RBP: ffff88908343a0d0 R08: 0000000000000000 R09: 0000000000000000 [ 682.981040] R10: 0000000000000286 R11: 3fffffffffffffff R12: ffffffff81690d60 [ 682.989282] R13: ffffffff81690a00 R14: ffff8890819807a8 R15: ffff88908343a36c [ 682.997535] FS: 00007f08c7bfa740(0000) GS:ffff88a03fd00000(0000) knlGS:0000000000000000 [ 683.006910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 683.013557] CR2: 000000000000000f CR3: 0000001080a66003 CR4: 00000000003706e0 [ 683.021819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 683.030075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 683.038336] Call Trace: [ 683.041167] devm_kfree+0x33/0x50 [ 683.045004] ice_vsi_free_arrays+0x5e/0xc0 [ice] [ 683.050380] ice_vsi_rebuild+0x4c8/0x750 [ice] [ 683.055543] ice_vsi_recfg_qs+0x9a/0x110 [ice] [ 683.060697] ice_set_channels+0x14f/0x290 [ice] [ 683.065962] ethnl_set_channels+0x333/0x3f0 [ 683.070807] genl_family_rcv_msg_doit+0xea/0x150 [ 683.076152] genl_rcv_msg+0xde/0x1d0 [ 683.080289] ? channels_prepare_data+0x60/0x60 [ 683.085432] ? genl_get_cmd+0xd0/0xd0 [ 683.089667] netlink_rcv_skb+0x50/0xf0 [ 683.094006] genl_rcv+0x24/0x40 [ 683.097638] netlink_unicast+0x239/0x340 [ 683.102177] netlink_sendmsg+0x22e/0x470 [ 683.106717] sock_sendmsg+0x5e/0x60 [ 683.110756] __sys_sendto+0xee/0x150 [ 683.114894] ? handle_mm_fault+0xd0/0x2a0 [ 683.119535] ? do_user_addr_fault+0x1f3/0x690 [ 683.134173] __x64_sys_sendto+0x25/0x30 [ 683.148231] do_syscall_64+0x3b/0xc0 [ 683.161992] entry_SYSCALL_64_after_hwframe+0x44/0xae Fix this by taking into account the value that num_possible_cpus() yields in addition to vsi->alloc_txq instead of doubling the latter. Fixes: efc2214b6047 ("ice: Add support for XDP") Fixes: 22bf877e528f ("ice: introduce XDP_TX fallback path") Reviewed-by: Alexander Lobakin <[email protected]> Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Kiran Bhandare <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen13-28/+86
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-19iavf: Fix VLAN feature flags after VFRBrett Creeley3-23/+56
When a VF goes through a reset, it's possible for the VF's feature set to change. For example it may lose the VIRTCHNL_VF_OFFLOAD_VLAN capability after VF reset. Unfortunately, the driver doesn't correctly deal with this situation and errors are seen from downing/upping the interface and/or moving the interface in/out of a network namespace. When setting the interface down/up we see the following errors after the VIRTCHNL_VF_OFFLOAD_VLAN capability was taken away from the VF: ice 0000:51:00.1: VF 1 failed opcode 12, retval: -64 iavf 0000:51:09.1: Failed to add VLAN filter, error IAVF_NOT_SUPPORTED ice 0000:51:00.1: VF 1 failed opcode 13, retval: -64 iavf 0000:51:09.1: Failed to delete VLAN filter, error IAVF_NOT_SUPPORTED These add/delete errors are happening because the VLAN filters are tracked internally to the driver and regardless of the VLAN_ALLOWED() setting the driver tries to delete/re-add them over virtchnl. Fix the delete failure by making sure to delete any VLAN filter tracking in the driver when a removal request is made, while preventing the virtchnl request. This makes it so the driver's VLAN list is up to date and the errors are Fix the add failure by making sure the check for VLAN_ALLOWED() during reset is done after the VF receives its capability list from the PF via VIRTCHNL_OP_GET_VF_RESOURCES. If VLAN functionality is not allowed, then prevent requesting re-adding the filters over virtchnl. When moving the interface into a network namespace we see the following errors after the VIRTCHNL_VF_OFFLOAD_VLAN capability was taken away from the VF: iavf 0000:51:09.1 enp81s0f1v1: NIC Link is Up Speed is 25 Gbps Full Duplex iavf 0000:51:09.1 temp_27: renamed from enp81s0f1v1 iavf 0000:51:09.1 mgmt: renamed from temp_27 iavf 0000:51:09.1 dev27: set_features() failed (-22); wanted 0x020190001fd54833, left 0x020190001fd54bb3 These errors are happening because we aren't correctly updating the netdev capabilities and dealing with ndo_fix_features() and ndo_set_features() correctly. Fix this by only reporting errors in the driver's ndo_set_features() callback when VIRTCHNL_VF_OFFLOAD_VLAN is not allowed and any attempt to enable the VLAN features is made. Also, make sure to disable VLAN insertion, filtering, and stripping since the VIRTCHNL_VF_OFFLOAD_VLAN flag applies to all of them and not just VLAN stripping. Also, after we process the capabilities in the VF reset path, make sure to call netdev_update_features() in case the capabilities have changed in order to update the netdev's feature set to match the VF's actual capabilities. Lastly, make sure to always report success on VLAN filter delete when VIRTCHNL_VF_OFFLOAD_VLAN is not supported. The changed flow in iavf_del_vlans() allows the stack to delete previosly existing VLAN filters even if VLAN filtering is not allowed. This makes it so the VLAN filter list is up to date. Fixes: 8774370d268f ("i40e/i40evf: support for VF VLAN tag stripping control") Signed-off-by: Brett Creeley <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-19iavf: Fix refreshing iavf adapter stats on ethtool requestJedrzej Jagielski4-0/+25
Currently iavf adapter statistics are refreshed only in a watchdog task, triggered approximately every two seconds, which causes some ethtool requests to return outdated values. Add explicit statistics refresh when requested by ethtool -S. Fixes: b476b0030e61 ("iavf: Move commands processing to the separate function") Signed-off-by: Jan Sokolowski <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-19iavf: Fix deadlock occurrence during resetting VF interfaceJedrzej Jagielski1-2/+5
System hangs if close the interface is called from the kernel during the interface is in resetting state. During resetting operation the link is closing but kernel didn't know it and it tried to close this interface again what sometimes led to deadlock. Inform kernel about current state of interface and turn off the flag IFF_UP when interface is closing until reset is finished. Previously it was most likely to hang the system when kernel (network manager) tried to close the interface in the same time when interface was in resetting state because of deadlock. Fixes: 3c8e0b989aa1 ("i40vf: don't stop me now") Signed-off-by: Jaroslaw Gawin <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-19iavf: Prevent changing static ITR values if adaptive moderation is onNitesh B Venkatesh1-4/+26
Resolve being able to change static values on VF when adaptive interrupt moderation is enabled. This problem is fixed by checking the interrupt settings is not a combination of change of static value while adaptive interrupt moderation is turned on. Without this fix, the user would be able to change static values on VF with adaptive moderation enabled. Fixes: 65e87c0398f5 ("i40evf: support queue-specific settings for interrupt moderation") Signed-off-by: Nitesh B Venkatesh <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski7-163/+224
Signed-off-by: Jakub Kicinski <[email protected]>
2021-11-18Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-David S. Miller3-136/+147
queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-11-17 This series contains updates to i40e driver only. Eryk adds accounting for VLAN header in packet size when VF port VLAN is configured. He also fixes TC queue distribution when the user has changed queue counts as well as for configuration of VF ADQ which caused dropped packets. Michal adds tracking for when a VSI is being released to prevent null pointer dereference when managing filters. Karen ensures PF successfully initiates VF requested reset which could cause a call trace otherwise. Jedrzej moves validation of channel queue value earlier to prevent partial configuration when the value is invalid. Grzegorz corrects the reported error when adding filter fails. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-11-18e100: fix device suspend/resumeJesse Brandeburg1-5/+13
As reported in [1], e100 was no longer working for suspend/resume cycles. The previous commit mentioned in the fixes appears to have broken things and this attempts to practice best known methods for device power management and keep wake-up working while allowing suspend/resume to work. To do this, I reorder a little bit of code and fix the resume path to make sure the device is enabled. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214933 Fixes: 69a74aef8a18 ("e100: use generic power management") Cc: Vaibhav Gupta <[email protected]> Reported-by: Alexey Kuznetsov <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Alexey Kuznetsov <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-17i40e: Fix display error code in dmesgGrzegorz Szczurek1-3/+2
Fix misleading display error in dmesg if tc filter return fail. Only i40e status error code should be converted to string, not linux error code. Otherwise, we return false information about the error. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Signed-off-by: Grzegorz Szczurek <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Dave Switzer <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-17i40e: Fix creation of first queue by omitting it if is not power of twoJedrzej Jagielski1-40/+19
Reject TCs creation with proper message if the first queue assignment is not equal to the power of two. The first queue number was checked too late in the second queue iteration, if second queue was configured at all. Now if first queue value is not a power of two, then trying to create qdisc will be rejected. Fixes: 8f88b3034db3 ("i40e: Add infrastructure for queue channel support") Signed-off-by: Grzegorz Szczurek <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-17i40e: Fix warning message and call stack during rmmod i40e driverKaren Sornek1-32/+21
Restore part of reset functionality used when reset is called from the VF to reset itself. Without this fix warning message is displayed when VF is being removed via sysfs. Fix the crash of the VF during reset by ensuring that the PF receives the reset message successfully. Refactor code to use one function instead of two. Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <[email protected]> Signed-off-by: Karen Sornek <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-17ixgbevf: Add support for new mailbox communication between PF and VFRadoslaw Tyl4-2/+23
Provide improved mailbox communication, between PF and VF, which is defined as API version 1.5. Signed-off-by: Radoslaw Tyl <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-17ixgbevf: Mailbox improvementsRadoslaw Tyl6-84/+265
Improve reliability of the mailbox communication and remove its potential flaws that may lead to the undefined or faulty behavior. Recently some users reported issues on ESX with 10G Intel NICs which were found to be caused by incorrect implementation of the PF-VF mailbox communication. Technical investigation highlighted areas to improve in the communication between PF or VF that wants to send the message (sender) and the other part which receives the message (receiver): - Locking the mailbox when the sender wants to send a message - Releasing the mailbox when the communication ends - Returning the result of the mailbox message execution Signed-off-by: Radoslaw Tyl <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-17ixgbevf: Add legacy suffix to old API mailbox functionsRadoslaw Tyl3-9/+9
Add legacy suffix to mailbox functions which should be backwards compatible with older PF drivers. Communication during API negotiation always has to be done using the earlier implementation. Signed-off-by: Radoslaw Tyl <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-17ixgbevf: Improve error handling in mailboxRadoslaw Tyl3-5/+13
Add new handling for error codes: IXGBE_ERR_CONFIG - ixgbe_mbx_operations is not correctly set IXGBE_ERR_TIMEOUT - mailbox operation, e.g. poll for message, timeout Signed-off-by: Radoslaw Tyl <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-17ixgbevf: Rename MSGTYPE to SUCCESS and FAILURERadoslaw Tyl3-23/+27
There is name similarity within IXGBE_VT_MSGTYPE_ACK and PFMAILBOX.ACK / VFMAILBOX.ACK. MSGTYPE macros are renamed to SUCCESS and FAILURE because they are not specified in datasheet and now will be easily distinguishable. Signed-off-by: Radoslaw Tyl <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-17i40e: Fix ping is lost after configuring ADq on VFEryk Rybak3-8/+74
Properly reconfigure VF VSIs after VF request ADQ. Created new function to update queue mapping and queue pairs per TC with AQ update VSI. This sets proper RSS size on NIC. VFs num_queue_pairs should not be changed during setup of queue maps. Previously, VF main VSI in ADQ had configured too many queues and had wrong RSS size, which lead to packets not being consumed and drops in connectivity. Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use") Co-developed-by: Przemyslaw Patynowski <[email protected]> Signed-off-by: Przemyslaw Patynowski <[email protected]> Signed-off-by: Eryk Rybak <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-17i40e: Fix changing previously set num_queue_pairs for PFsEryk Rybak1-12/+23
Currently, the i40e_vsi_setup_queue_map is basing the count of queues in TCs on a VSI's alloc_queue_pairs member which is not changed throughout any user's action (for example via ethtool's set_channels callback). This implies that vsi->tc_config.tc_info[n].qcount value that is given to the kernel via netdev_set_tc_queue() that notifies about the count of queues per particular traffic class is constant even if user has changed the total count of queues. This in turn caused the kernel warning after setting the queue count to the lower value than the initial one: $ ethtool -l ens801f0 Channel parameters for ens801f0: Pre-set maximums: RX: 0 TX: 0 Other: 1 Combined: 64 Current hardware settings: RX: 0 TX: 0 Other: 1 Combined: 64 $ ethtool -L ens801f0 combined 40 [dmesg] Number of in use tx queues changed invalidating tc mappings. Priority traffic classification disabled! Reason was that vsi->alloc_queue_pairs stayed at 64 value which was used to set the qcount on TC0 (by default only TC0 exists so all of the existing queues are assigned to TC0). we update the offset/qcount via netdev_set_tc_queue() back to the old value but then the netif_set_real_num_tx_queues() is using the vsi->num_queue_pairs as a value which got set to 40. Fix it by using vsi->req_queue_pairs as a queue count that will be distributed across TCs. Do it only for non-zero values, which implies that user actually requested the new count of queues. For VSIs other than main, stay with the vsi->alloc_queue_pairs as we only allow manipulating the queue count on main VSI. Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use") Co-developed-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Maciej Fijalkowski <[email protected]> Co-developed-by: Przemyslaw Patynowski <[email protected]> Signed-off-by: Przemyslaw Patynowski <[email protected]> Signed-off-by: Eryk Rybak <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-17i40e: Fix NULL ptr dereference on VSI filter syncMichal Maloszewski2-2/+4
Remove the reason of null pointer dereference in sync VSI filters. Added new I40E_VSI_RELEASING flag to signalize deleting and releasing of VSI resources to sync this thread with sync filters subtask. Without this patch it is possible to start update the VSI filter list after VSI is removed, that's causing a kernel oops. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Grzegorz Szczurek <[email protected]> Signed-off-by: Michal Maloszewski <[email protected]> Reviewed-by: Przemyslaw Patynowski <[email protected]> Reviewed-by: Witold Fijalkowski <[email protected]> Reviewed-by: Jaroslaw Gawin <[email protected]> Reviewed-by: Aleksandr Loktionov <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-17i40e: Fix correct max_pkt_size on VF RX queueEryk Rybak1-44/+9
Setting VLAN port increasing RX queue max_pkt_size by 4 bytes to take VLAN tag into account. Trigger the VF reset when setting port VLAN for VF to renegotiate its capabilities and reinitialize. Fixes: ba4e003d29c1 ("i40e: don't hold spinlock while resetting VF") Signed-off-by: Sylwester Dziedziuch <[email protected]> Signed-off-by: Aleksandr Loktionov <[email protected]> Signed-off-by: Eryk Rybak <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-17net: annotate accesses to queue->trans_startEric Dumazet1-2/+2
In following patches, dev_watchdog() will no longer stop all queues. It will read queue->trans_start locklessly. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-15iavf: Restore VLAN filters after link downAkeem G Abodunrin2-5/+31
Restore VLAN filters after the link is brought down, and up - since all filters are deleted from HW during the netdev link down routine. Fixes: ed1f5b58ea01 ("i40evf: remove VLAN filters on close") Signed-off-by: Akeem G Abodunrin <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-11-15iavf: Fix for setting queues to 0Grzegorz Szczurek1-1/+1
Now setting combine to 0 will be rejected with the appropriate error code. This has been implemented by adding a condition that checks the value of combine equal to zero. Without this patch, when the user requested it, no error was returned and combine was set to the default value for VF. Fixes: 5520deb15326 ("iavf: Enable support for up to 16 queues") Signed-off-by: Grzegorz Szczurek <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.