aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice/ice_main.c
AgeCommit message (Collapse)AuthorFilesLines
2023-12-18Merge tag 'for-netdev' of ↵Jakub Kicinski1-0/+21
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Alexei Starovoitov says: ==================== pull-request: bpf-next 2023-12-18 This PR is larger than usual and contains changes in various parts of the kernel. The main changes are: 1) Fix kCFI bugs in BPF, from Peter Zijlstra. End result: all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y. 2) Introduce BPF token object, from Andrii Nakryiko. It adds an ability to delegate a subset of BPF features from privileged daemon (e.g., systemd) through special mount options for userns-bound BPF FS to a trusted unprivileged application. The design accommodates suggestions from Christian Brauner and Paul Moore. Example: $ sudo mkdir -p /sys/fs/bpf/token $ sudo mount -t bpf bpffs /sys/fs/bpf/token \ -o delegate_cmds=prog_load:MAP_CREATE \ -o delegate_progs=kprobe \ -o delegate_attachs=xdp 3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei. - Complete precision tracking support for register spills - Fix verification of possibly-zero-sized stack accesses - Fix access to uninit stack slots - Track aligned STACK_ZERO cases as imprecise spilled registers. It improves the verifier "instructions processed" metric from single digit to 50-60% for some programs. - Fix verifier retval logic 4) Support for VLAN tag in XDP hints, from Larysa Zaremba. 5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu. End result: better memory utilization and lower I$ miss for calls to BPF via BPF trampoline. 6) Fix race between BPF prog accessing inner map and parallel delete, from Hou Tao. 7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu. It allows BPF interact with IPSEC infra. The intent is to support software RSS (via XDP) for the upcoming ipsec pcpu work. Experiments on AWS demonstrate single tunnel pcpu ipsec reaching line rate on 100G ENA nics. 8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao. 9) BPF file verification via fsverity, from Song Liu. It allows BPF progs get fsverity digest. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits) bpf: Ensure precise is reset to false in __mark_reg_const_zero() selftests/bpf: Add more uprobe multi fail tests bpf: Fail uprobe multi link with negative offset selftests/bpf: Test the release of map btf s390/bpf: Fix indirect trampoline generation selftests/bpf: Temporarily disable dummy_struct_ops test on s390 x86/cfi,bpf: Fix bpf_exception_cb() signature bpf: Fix dtor CFI cfi: Add CFI_NOSEAL() x86/cfi,bpf: Fix bpf_struct_ops CFI x86/cfi,bpf: Fix bpf_callback_t CFI x86/cfi,bpf: Fix BPF JIT call cfi: Flip headers selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment bpf: Limit the number of kprobes when attaching program to multiple kprobes bpf: Limit the number of uprobes when attaching program to multiple uprobes bpf: xdp: Register generic_kfunc_set with XDP programs selftests/bpf: utilize string values for delegate_xxx mount options ... ==================== Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14ice: add ability to read and configure FW log dataPaul M Stillwell Jr1-0/+29
Once logging is enabled the user should read the data from the 'data' file. The data is in the form of a binary blob that can be sent to Intel for decoding. To read the data use a command like: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data > log_data.bin If the user wants to clear the FW log data that has been stored in the driver then they can write any value to the 'data' file and that will clear the data. An example is: # echo 34 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data In addition to being able to read the data the user can configure how much memory is used to store FW log data. This allows the user to increase/decrease the amount of memory based on the users situation. The data is stored such that if the memory fills up then the oldest data will get overwritten in a circular manner. To change the amount of memory the user can write to the 'log_size' file like this: # echo <value> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/log_size Where <value> is one of 128K, 256K, 512K, 1M, and 2M. The default value is 1M. The user can see the current value of 'log_size' by reading the file: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/log_size Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-14ice: configure FW loggingPaul M Stillwell Jr1-0/+18
Users want the ability to debug FW issues by retrieving the FW logs from the E8xx devices. Use debugfs to allow the user to configure the log level and number of messages for FW logging. If FW logging is supported on the E8xx then the file 'fwlog' will be created under the PCI device ID for the ice driver. If the file does not exist then either the E8xx doesn't support FW logging or debugfs is not enabled on the system. One thing users want to do is control which events are reported. The user can read and write the 'fwlog/modules/<module name>' to get/set the log levels. Each module in the FW that supports logging ht as a file under 'fwlog/modules' that supports reading (to see what the current log level is) and writing (to change the log level). The format to set the log levels for a module are: # echo <log level> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/<module> The supported log levels are: * none * error * warning * normal * verbose Each level includes the messages from the previous/lower level The modules that are supported are: * general * ctrl * link * link_topo * dnl * i2c * sdp * mdio * adminq * hdma * lldp * dcbx * dcb * xlr * nvm * auth * vpd * iosf * parser * sw * scheduler * txq * rsvd * post * watchdog * task_dispatch * mng * synce * health * tsdrv * pfreg * mdlver * all The module 'all' is a special module which allows the user to read or write to all of the modules. The following example command would set the DCB module to the 'normal' log level: # echo normal > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb If the user wants to set the DCB, Link, and the AdminQ modules to 'verbose' then the commands are: # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/link # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/adminq If the user wants to set all modules to the 'warning' level then the command is: # echo warning > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all If the user wants to disable logging for a module then they can set the level to 'none'. An example setting the 'watchdog' module is: # echo none > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/watchdog If the user wants to see what the log level is for a specific module then the command is: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb This will return the log level for the DCB module. If the user wants to see the log level for all the modules then the command is: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all Writing to the module file will update the configuration, but NOT enable the configuration (that is a separate command). In addition to configuring the modules, the user can also configure the number of log messages (nr_messages) to include in a single Admin Receive Queue (ARQ) event.The range is 1-128 (1 means push every log message, 128 means push only when the max AQ command buffer is full). The suggested value is 10. To see/change the resolution the user can read/write the 'fwlog/nr_messages' file. An example changing the value to 50 is # echo 50 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages To see the current value of 'nr_messages' then the command is: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-14ice: remove FW logging codePaul M Stillwell Jr1-3/+0
The FW logging code doesn't work because there is no way to set cq_ena or uart_ena so remove the code. This code is the original (v1) way of FW logging so it should be replaced with the v2 way. Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-13ice: enable symmetric-xor RSS for Toeplitz hash functionJeff Guo1-0/+53
Allow the user to set the symmetric Toeplitz hash function via: # ethtool -X eth0 hfunc toeplitz symmetric-xor All existing RSS configurations will be converted to symmetric unless they have a non-symmetric field (other than IP src/dst and L4 src/dst ports) used for hashing. The driver will reject a new RSS configuration if such a field is requested. The hash function in the E800 NICs is set per-VSI and a specific AQ command is needed to modify the hash function. Use the AQ command to enable setting the symmetric Toeplitz RSS hash function for any VSI in the new ice_set_rss_hfunc(). When the Symmetric Toeplitz hash function is used, the hardware sets the input set of the RSS (Toeplitz) algorithm to be the XOR of the fields index by HSYMM and the fields index by the INSET registers. We use this to create a symmetric hash by setting the HSYMM registers to point to their counterparts in the INSET registers: HSYMM [src_fv] = dst_fv; HSYMM [dst_fv] = src_fv; where src_fv and dst_fv are the indexes of the protocol's src and dst fields. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Jeff Guo <jia.guo@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-8-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13ice: refactor the FD and RSS flow ID generationAhmed Zaki1-3/+2
The flow director and RSS blocks use separate methods to generate a unique 64 bit ID for the flow. This is not extendable, especially for the RSS that already uses all 64 bit space. Refactor the flow generation API so that the ID is generated within ice_flow_add_prof(). The FD and RSS blocks caches the generated ID for later use. Suggested-by: Dan Nowlin <dan.nowlin@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-7-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13ice: Implement VLAN tag hintLarysa Zaremba1-0/+20
Implement .xmo_rx_vlan_tag callback to allow XDP code to read packet's VLAN tag. At the same time, use vlan_tci instead of vlan_tag in touched code, because VLAN tag often refers to VLAN proto and VLAN TCI combined, while in the code we clearly store only VLAN TCI. Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20231205210847.28460-11-larysa.zaremba@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13ice: Support HW timestamp hintLarysa Zaremba1-0/+1
Use previously refactored code and create a function that allows XDP code to read HW timestamp. Also, introduce packet context, where hints-related data will be stored. ice_xdp_buff contains only a pointer to this structure, to avoid copying it in ZC mode later in the series. HW timestamp is the first supported hint in the driver, so also add xdp_metadata_ops. Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20231205210847.28460-6-larysa.zaremba@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-05ice: Re-enable timestamping correctly after resetKarol Kolacinski1-1/+1
During reset, TX_TSYN interrupt should be processed as it may process timestamps in brief moments before and after reset. Timestamping should be enabled on VSIs at the end of reset procedure. On ice_get_phy_tx_tstamp_ready error, interrupt should not be rearmed because error only happens on resets. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-05ice: read internal temperature sensorKonrad Knitter1-0/+5
Since 4.30 firmware exposes internal thermal sensor reading via admin queue commands. Expose those readouts via hwmon API when supported. Datasheet: Get Sensor Reading Command (Opcode: 0x0632) +--------------------+--------+--------------------+-------------------------+ | Name | Bytes | Value | Remarks | +--------------------+--------+--------------------+-------------------------+ | Flags | 1-0 | | | | Opcode | 2-3 | 0x0632 | Command opcode | | Datalen | 4-5 | 0 | No external buffer. | | Return value | 6-7 | | Return value. | | Cookie High | 8-11 | Cookie | | | Cookie Low | 12-15 | Cookie | | | Sensor | 16 | | 0x00: Internal temp | | | | | 0x01-0xFF: Reserved. | | Format | 17 | Requested response | Only 0x00 is supported. | | | | format | 0x01-0xFF: Reserved. | | Reserved | 18-23 | | | | Data Address high | 24-27 | Response buffer | | | | | address | | | Data Address low | 28-31 | Response buffer | | | | | address | | +--------------------+--------+--------------------+-------------------------+ Get Sensor Reading Response (Opcode: 0x0632) +--------------------+--------+--------------------+-------------------------+ | Name | Bytes | Value | Remarks | +--------------------+--------+--------------------+-------------------------+ | Flags | 1-0 | | | | Opcode | 2-3 | 0x0632 | Command opcode | | Datalen | 4-5 | 0 | No external buffer | | Return value | 6-7 | | Return value. | | | | | EINVAL: Invalid | | | | | parameters | | | | | ENOENT: Unsupported | | | | | sensor | | | | | EIO: Sensor access | | | | | error | | Cookie High | 8-11 | Cookie | | | Cookie Low | 12-15 | Cookie | | | Sensor Reading | 16-23 | | Format of the reading | | | | | is dependent on request | | Data Address high | 24-27 | Response buffer | | | | | address | | | Data Address low | 28-31 | Response buffer | | | | | address | | +--------------------+--------+--------------------+-------------------------+ Sensor Reading for Sensor 0x00 (Internal Chip Temperature): +--------------------+--------+--------------------+-------------------------+ | Name | Bytes | Value | Remarks | +--------------------+--------+--------------------+-------------------------+ | Thermal Sensor | 0 | | Reading in degrees | | reading | | | Celsius. Signed int8 | | Warning High | 1 | | Warning High threshold | | threshold | | | in degrees Celsius. | | | | | Unsigned int8. | | | | | 0xFF when unsupported | | Critical High | 2 | | Critical High threshold | | threshold | | | in degrees Celsius. | | | | | Unsigned int8. | | | | | 0xFF when unsupported | | Fatal High | 3 | | Fatal High threshold | | threshold | | | in degrees Celsius. | | | | | Unsigned int8. | | | | | 0xFF when unsupported | | Reserved | 4-7 | | | +--------------------+--------+--------------------+-------------------------+ Driver provides current reading from HW as well as device specific thresholds for thermal alarm (Warning, Critical, Fatal) events. $ sensors Output ========================================================= ice-pci-b100 Adapter: PCI adapter temp1: +62.0°C (high = +95.0°C, crit = +105.0°C) (emerg = +115.0°C) Tested on Intel Corporation Ethernet Controller E810-C for SFP Co-developed-by: Marcin Domagala <marcinx.domagala@intel.com> Signed-off-by: Marcin Domagala <marcinx.domagala@intel.com> Co-developed-by: Eric Joyner <eric.joyner@intel.com> Signed-off-by: Eric Joyner <eric.joyner@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Konrad Knitter <konrad.knitter@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-04ice: Add support in the driver for associating queue with napiAmritha Nambiar1-1/+3
After the napi context is initialized, map the napi instance with the queue/queue-set on the corresponding irq line. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://lore.kernel.org/r/170147332060.5260.13310934657151560599.stgit@anambiarhost.jf.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-9/+3
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/intel/ice/ice_main.c c9663f79cd82 ("ice: adjust switchdev rebuild path") 7758017911a4 ("ice: restore timestamp configuration after device reset") https://lore.kernel.org/all/20231121211259.3348630-1-anthony.l.nguyen@intel.com/ Adjacent changes: kernel/bpf/verifier.c bb124da69c47 ("bpf: keep track of max number of bpf_loop callback iterations") 5f99f312bd3b ("bpf: add register bounds sanity checks and sanitization") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23ice: restore timestamp configuration after device resetJacob Keller1-9/+3
The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset() to disable timestamping while the device is resetting. This operation destroys the user requested configuration. While the driver does call ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings after a reset, it unconditionally passes true or false, resulting in failure to restore previous user space configuration. This results in a device reset forcibly disabling timestamp configuration regardless of current user settings. This was not detected previously due to a quirk of the LinuxPTP ptp4l application. If ptp4l detects a missing timestamp, it enters a fault state and performs recovery logic which includes executing SIOCSHWTSTAMP again, restoring the now accidentally cleared configuration. Not every application does this, and for these applications, timestamps will mysteriously stop after a PF reset, without being restored until an application restart. Fix this by replacing ice_ptp_cfg_timestamp() with two new functions: 1) ice_ptp_disable_timestamp_mode() which unconditionally disables the timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release() 2) ice_ptp_restore_timestamp_mode() which calls ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration, calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and issues an immediate TSYN_TX interrupt to ensure that timestamps which may have occurred during the device reset get processed. Modify the ice_ptp_set_timestamp_mode to directly save the user configuration and then call ice_ptp_restore_timestamp_mode. This way, reset no longer destroys the saved user configuration. This obsoletes the ice_set_tx_tstamp() function which can now be safely removed. With this change, all devices should now restore Tx and Rx timestamping functionality correctly after a PF reset without application intervention. Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-13ice: adjust switchdev rebuild pathMichal Swiatkowski1-2/+2
There is no need to use specific functions for rebuilding path. Let's use current implementation by removing all representors and as the result remove switchdev environment. It will be added in devices rebuild path. For example during adding VFs, port representors for them also will be created. Rebuild control plane VSI before removing representors with INIT_VSI flag set to reinit VSI in hardware after reset. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: track port representors in xarrayMichal Swiatkowski1-0/+2
Instead of assuming that each VF has pointer to port representor save it in xarray. It will allow adding port representor for other device types. Drop reference to VF where it is use only to get port representor. Get it from xarray instead. The functions will no longer by specific for VF, rename them. Track id assigned by xarray in port representor structure. The id can't be used as ::q_id, because it is fixed during port representor lifetime. ::q_id can change after adding / removing other port representors. Side effect of removing VF pointer is that we are losing VF MAC information used in unrolling. Store it in port representor as parent MAC. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-10-26ice: Hook up 4 E830 devices by adding their IDsPawel Chmielewski1-0/+4
As the previous patches provide support for E830 hardware, add E830 specific IDs to the PCI device ID table, so these devices can now be probed by the kernel. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-7-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26ice: Remove redundant zeroing of the fields.Pawel Chmielewski1-27/+27
Remove zeroing of the fields, as all the fields are in fact initialized with zeros automatically Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-6-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26ice: Add E830 device IDs, MAC type and registersPaul Greenwalt1-6/+7
E830 is the 200G NIC family which uses the ice driver. Add specific E830 registers. Embed macros to use proper register based on (hw)->mac_type & name those macros to [ORIGINAL]_BY_MAC(hw). Registers only available on one of the macs will need to be explicitly referred to as E800_NAME instead of just NAME. PTP is not yet supported. Co-developed-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com> Co-developed-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Co-developed-by: Scott Taylor <scott.w.taylor@intel.com> Signed-off-by: Scott Taylor <scott.w.taylor@intel.com> Co-developed-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-20ice: set MSI-X vector count on VFMichal Swiatkowski1-0/+2
Implement ops needed to set MSI-X vector count on VF. sriov_get_vf_total_msix() should return total number of MSI-X that can be used by the VFs. Return the value set by devlink resources API (pf->req_msix.vf). sriov_set_msix_vec_count() will set number of MSI-X on particular VF. Disable VF register mapping, rebuild VSI with new MSI-X and queues values and enable new VF register mapping. For best performance set number of queues equal to number of MSI-X. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-20ice: store VF's pci_dev ptr in ice_vfPrzemek Kitszel1-1/+1
Extend struct ice_vf by vfdev. Calculation of vfdev falls more nicely into ice_create_vf_entries(). Caching of vfdev enables simplification of ice_restore_all_vfs_msi_state(). Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+18
Cross-merge networking fixes after downstream PR. net/mac80211/key.c 02e0e426a2fb ("wifi: mac80211: fix error path key leak") 2a8b665e6bcc ("wifi: mac80211: remove key_mtx") 7d6904bf26b9 ("Merge wireless into wireless-next") https://lore.kernel.org/all/20231012113648.46eea5ec@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/ti/Kconfig a602ee3176a8 ("net: ethernet: ti: Fix mixed module-builtin object") 98bdeae9502b ("net: cpmac: remove driver to prepare for platform removal") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-18ice: Refactor finding advertised link speedPawel Chmielewski1-0/+2
Refactor ice_get_link_ksettings to using forced speed to link modes mapping. Suggested-by : Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-13ice: Fix safe mode when DDP is missingMateusz Pacuszka1-0/+3
One thing is broken in the safe mode, that is ice_deinit_features() is being executed even that ice_init_features() was not causing stack trace during pci_unregister_driver(). Add check on the top of the function. Fixes: 5b246e533d01 ("ice: split probe into smaller functions") Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Link: https://lore.kernel.org/r/20231011233334.336092-4-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-13ice: reset first in crash dump kernelsJesse Brandeburg1-0/+15
When the system boots into the crash dump kernel after a panic, the ice networking device may still have pending transactions that can cause errors or machine checks when the device is re-enabled. This can prevent the crash dump kernel from loading the driver or collecting the crash data. To avoid this issue, perform a function level reset (FLR) on the ice device via PCIe config space before enabling it on the crash kernel. This will clear any outstanding transactions and stop all queues and interrupts. Restore the config space after the FLR, otherwise it was found in testing that the driver wouldn't load successfully. The following sequence causes the original issue: - Load the ice driver with modprobe ice - Enable SR-IOV with 2 VFs: echo 2 > /sys/class/net/eth0/device/sriov_num_vfs - Trigger a crash with echo c > /proc/sysrq-trigger - Load the ice driver again (or let it load automatically) with modprobe ice - The system crashes again during pcim_enable_device() Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series") Reported-by: Vishal Agrawal <vagrawal@redhat.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Link: https://lore.kernel.org/r/20231011233334.336092-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-09-20ice: Auxbus devices & driver for E822 TSMichal Michalik1-3/+8
There is a problem in HW in E822-based devices leading to race condition. It might happen that, in order: - PF0 (which owns the PHC) requests few timestamps, - PF1 requests a timestamp, - interrupt is being triggered and both PF0 and PF1 threads are woken up, - PF0 got one timestamp, still waiting for others so not going to sleep, - PF1 gets it's timestamp, process it and go to sleep, - PF1 requests a timestamp again, - just before PF0 goes to sleep timestamp of PF1 appear, - PF0 finishes all it's timestamps and go to sleep (PF1 also sleeping). That leaves PF1 timestamp memory not read, which lead to blocking the next interrupt from arriving. Fix it by adding auxiliary devices and only one driver to handle all the timestamps for all PF's by PHC owner. In the past each PF requested it's own timestamps and process it from the start till the end which causes problem described above. Currently each PF requests the timestamps as before, but the actual reading of the completed timestamps is being done by the PTP auxiliary driver, which is registered by the PF which owns PHC. Additionally, the newly introduced auxiliary driver/devices for PTP clock owner will be used for other features in all products (including E810). Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-18ice: introduce ice_pf_src_tmr_ownedJacob Keller1-1/+1
Add ice_pf_src_tmr_owned() macro to check the function capability bit indicating if the current function owns the PTP hardware clock. This is slightly shorter than the more verbose access via hw.func_caps.ts_func_info.src_tmr_owned. Use this where possible rather than open coding its equivalent. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-17ice: implement dpll interface to control cguArkadiusz Kubalewski1-0/+6
Control over clock generation unit is required for further development of Synchronous Ethernet feature. Interface provides ability to obtain current state of a dpll, its sources and outputs which are pins, and allows their configuration. Co-developed-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com> Co-developed-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-18Merge branch '100GbE' of ↵Jakub Kicinski1-49/+50
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-08-17 (ice) This series contains updates to ice driver only. Jan removes unused functions and refactors code to make, possible, functions static. Jake rearranges some functions to be logically grouped. Marcin removes an unnecessary call to disable VLAN stripping. Yang Yingliang utilizes list_for_each_entry() helper for a couple list traversals. Przemek removes some parameters from ice_aq_alloc_free_res() which were always the same and reworks ice_aq_wait_for_event() to reduce chance of race. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: split ice_aq_wait_for_event() func into two ice: embed &ice_rq_event_info event into struct ice_aq_task ice: ice_aq_check_events: fix off-by-one check when filling buffer ice: drop two params from ice_aq_alloc_free_res() ice: use list_for_each_entry() helper ice: Remove redundant VSI configuration in eswitch setup ice: move E810T functions to before device agnostic ones ice: refactor ice_vsi_is_vlan_pruning_ena ice: refactor ice_ptp_hw to make functions static ice: refactor ice_sched to make functions static ice: Utilize assign_bit() helper ice: refactor ice_vf_lib to make functions static ice: refactor ice_lib to make functions static ice: refactor ice_ddp to make functions static ice: remove unused methods ==================== Link: https://lore.kernel.org/r/20230817212239.2601543-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+5
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/sfc/tc.c fa165e194997 ("sfc: don't unregister flow_indr if it was never registered") 3bf969e88ada ("sfc: add MAE table machinery for conntrack table") https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17ice: split ice_aq_wait_for_event() func into twoPrzemek Kitszel1-23/+44
Mitigate race between registering on wait list and receiving AQ Response from FW. ice_aq_prep_for_event() should be called before sending AQ command, ice_aq_wait_for_event() should be called after sending AQ command, to wait for AQ Response. Please note, that this was found by reading the code, an actual race has not yet materialized. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-17ice: embed &ice_rq_event_info event into struct ice_aq_taskPrzemek Kitszel1-25/+4
Expose struct ice_aq_task to callers, what takes burden of memory ownership out from AQ-wait family of functions, and reduces need for heap-based allocations. Embed struct ice_rq_event_info event into struct ice_aq_task (instead of it being a ptr) to remove some more code from the callers. Subsequent commit will improve more based on this one. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-17ice: ice_aq_check_events: fix off-by-one check when filling bufferPrzemek Kitszel1-6/+7
Allow task's event buffer to be filled also in the case that it's size is exactly the size of the message. Fixes: d69ea414c9b4 ("ice: implement device flash update via devlink") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-17ice: Block switchdev mode when ADQ is active and vice versaMarcin Szycik1-0/+5
ADQ and switchdev are not supported simultaneously. Enabling both at the same time can result in nullptr dereference. To prevent this, check if ADQ is active when changing devlink mode to switchdev mode, and check if switchdev is active when enabling ADQ. Fixes: fbc7b27af0f9 ("ice: enable ndo_setup_tc support for mqprio_qdisc") Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230816193405.1307580-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07ice: add FW load waitJan Sokolowski1-0/+37
As some cards load FW from external sources, we have to wait to be sure that FW is ready before setting link up. Add check and wait for FW readiness Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+18
Cross-merge networking fixes after downstream PR. Conflicts: net/dsa/port.c 9945c1fb03a3 ("net: dsa: fix older DSA drivers using phylink") a88dd7538461 ("net: dsa: remove legacy_pre_march2020 detection") https://lore.kernel.org/all/20230731102254.2c9868ca@canb.auug.org.au/ net/xdp/xsk.c 3c5b4d69c358 ("net: annotate data-races around sk->sk_mark") b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path") https://lore.kernel.org/all/20230731102631.39988412@canb.auug.org.au/ drivers/net/ethernet/broadcom/bnxt/bnxt.c 37b61cda9c16 ("bnxt: don't handle XDP in netpoll") 2b56b3d99241 ("eth: bnxt: handle invalid Tx completions more gracefully") https://lore.kernel.org/all/20230801101708.1dc7faac@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c 62da08331f1a ("net/mlx5e: Set proper IPsec source port in L4 selector") fbd517549c32 ("net/mlx5e: Add function to get IPsec offload namespace") drivers/net/ethernet/sfc/selftest.c 55c1528f9b97 ("sfc: fix field-spanning memcpy in selftest") ae9d445cd41f ("sfc: Miscellaneous comment removals") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-31ice: Fix RDMA VSI removal during queue rebuildRafal Rogalski1-0/+18
During qdisc create/delete, it is necessary to rebuild the queue of VSIs. An error occurred because the VSIs created by RDMA were still active. Added check if RDMA is active. If yes, it disallows qdisc changes and writes a message in the system logs. Fixes: 348048e724a0 ("ice: Implement iidc operations") Signed-off-by: Rafal Rogalski <rafalx.rogalski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230728171243.2446101-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-27ice: update reset path for SRIOV LAG supportDave Ertman1-1/+13
Add code to rebuild the LAG resources when rebuilding the state of the interface after a reset. Also added in a function for building per-queue information into the buffer used to configure VF queues for LAG fail-over. This improves code reuse. Due to differences in timing per interface for recovering from a reset, add in the ability to retry on non-local dependencies where needed. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-27ice: Add driver support for firmware changes for LAGDave Ertman1-3/+19
Add the defines, fields, and detection code for FW support of LAG for SRIOV. Also exposes some previously static functions to allow access in the lag code. Clean up code that is unused or not needed for LAG support. Also add an ordered workqueue for processing LAG events. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-24ice: Implement basic eswitch bridge setupWojciech Drewek1-1/+1
With this patch, ice driver is able to track if the port representors or uplink port were added to the linux bridge in switchdev mode. Listen for NETDEV_CHANGEUPPER events in order to detect this. ice_esw_br data structure reflects the linux bridge and stores all the ports of the bridge (ice_esw_br_port) in xarray, it's created when the first port is added to the bridge and freed once the last port is removed. Note that only one bridge is supported per eswitch. Bridge port (ice_esw_br_port) can be either a VF port representor port or uplink port (ice_esw_br_port_type). In both cases bridge port holds a reference to the VSI, VF's VSI in case of the PR and uplink VSI in case of the uplink. VSI's index is used as an index to the xarray in which ports are stored. Add a check which prevents configuring switchdev mode if uplink is already added to any bridge. This is needed because we need to listen for NETDEV_CHANGEUPPER events to record if the uplink was added to the bridge. Netdevice notifier is registered after eswitch mode is changed to switchdev. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-24ice: Prohibit rx mode change in switchdev modeWojciech Drewek1-1/+1
Don't allow to change promisc mode in switchdev mode. When switchdev is configured, PF netdev is set to be a default VSI. This is needed for the slow-path to work correctly. All the unmatched packets will be directed to PF netdev. It is possible that this setting might be overwritten by ndo_set_rx_mode. Prevent this by checking if switchdev is enabled in ice_set_rx_mode. Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+8
Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-19Merge tag 'for-netdev' of ↵Jakub Kicinski1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Alexei Starovoitov says: ==================== pull-request: bpf-next 2023-07-19 We've added 45 non-merge commits during the last 3 day(s) which contain a total of 71 files changed, 7808 insertions(+), 592 deletions(-). The main changes are: 1) multi-buffer support in AF_XDP, from Maciej Fijalkowski, Magnus Karlsson, Tirthendu Sarkar. 2) BPF link support for tc BPF programs, from Daniel Borkmann. 3) Enable bpf_map_sum_elem_count kfunc for all program types, from Anton Protopopov. 4) Add 'owner' field to bpf_rb_node to fix races in shared ownership, Dave Marchevsky. 5) Prevent potential skb_header_pointer() misuse, from Alexei Starovoitov. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits) bpf, net: Introduce skb_pointer_if_linear(). bpf: sync tools/ uapi header with selftests/bpf: Add mprog API tests for BPF tcx links selftests/bpf: Add mprog API tests for BPF tcx opts bpftool: Extend net dump with tcx progs libbpf: Add helper macro to clear opts structs libbpf: Add link-based API for tcx libbpf: Add opts-based attach/detach/query API for tcx bpf: Add fd-based tcx multi-prog infra with link support bpf: Add generic attach/detach/query API for multi-progs selftests/xsk: reset NIC settings to default after running test suite selftests/xsk: add test for too many frags selftests/xsk: add metadata copy test for multi-buff selftests/xsk: add invalid descriptor test for multi-buffer selftests/xsk: add unaligned mode test for multi-buffer selftests/xsk: add basic multi-buffer test selftests/xsk: transmit and receive multi-buffer packets xsk: add multi-buffer documentation i40e: xsk: add TX multi-buffer support ice: xsk: Tx multi-buffer support ... ==================== Link: https://lore.kernel.org/r/20230719175424.75717-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-19ice: xsk: Tx multi-buffer supportMaciej Fijalkowski1-0/+1
Most of this patch is about actually supporting XDP_TX action. Pure Tx ZC support is only about looking at XDP_PKT_CONTD presence at options field and based on that generating EOP bit on Tx HW descriptor. This is that simple due to the implementation on xsk_tx_peek_release_desc_batch() where we are making sure that last produced descriptor is an EOP one. Overwrite xdp_zc_max_segs with a value that defines max scatter-gatter count on Tx side that HW can handle. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230719132421.584801-16-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-07-18ice: remove unnecessary (void*) conversionsWu Yunchuan1-2/+2
No need cast (void*) to (struct ice_ring_container *). Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Link: https://lore.kernel.org/r/20230717031154.54740-1-yunchuan@nfschina.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-14ice: prevent NULL pointer deref during reloadMichal Swiatkowski1-2/+8
Calling ethtool during reload can lead to call trace, because VSI isn't configured for some time, but netdev is alive. To fix it add rtnl lock for VSI deconfig and config. Set ::num_q_vectors to 0 after freeing and add a check for ::tx/rx_rings in ring related ethtool ops. Add proper unroll of filters in ice_start_eth(). Reproduction: $watch -n 0.1 -d 'ethtool -g enp24s0f0np0' $devlink dev reload pci/0000:18:00.0 action driver_reinit Call trace before fix: [66303.926205] BUG: kernel NULL pointer dereference, address: 0000000000000000 [66303.926259] #PF: supervisor read access in kernel mode [66303.926286] #PF: error_code(0x0000) - not-present page [66303.926311] PGD 0 P4D 0 [66303.926332] Oops: 0000 [#1] PREEMPT SMP PTI [66303.926358] CPU: 4 PID: 933821 Comm: ethtool Kdump: loaded Tainted: G OE 6.4.0-rc5+ #1 [66303.926400] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018 [66303.926446] RIP: 0010:ice_get_ringparam+0x22/0x50 [ice] [66303.926649] Code: 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 87 c0 09 00 00 c7 46 04 e0 1f 00 00 c7 46 10 e0 1f 00 00 48 8b 50 20 <48> 8b 12 0f b7 52 3a 89 56 14 48 8b 40 28 48 8b 00 0f b7 40 58 48 [66303.926722] RSP: 0018:ffffad40472f39c8 EFLAGS: 00010246 [66303.926749] RAX: ffff98a8ada05828 RBX: ffff98a8c46dd060 RCX: ffffad40472f3b48 [66303.926781] RDX: 0000000000000000 RSI: ffff98a8c46dd068 RDI: ffff98a8b23c4000 [66303.926811] RBP: ffffad40472f3b48 R08: 00000000000337b0 R09: 0000000000000000 [66303.926843] R10: 0000000000000001 R11: 0000000000000100 R12: ffff98a8b23c4000 [66303.926874] R13: ffff98a8c46dd060 R14: 000000000000000f R15: ffffad40472f3a50 [66303.926906] FS: 00007f6397966740(0000) GS:ffff98b390900000(0000) knlGS:0000000000000000 [66303.926941] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66303.926967] CR2: 0000000000000000 CR3: 000000011ac20002 CR4: 00000000007706e0 [66303.926999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [66303.927029] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [66303.927060] PKRU: 55555554 [66303.927075] Call Trace: [66303.927094] <TASK> [66303.927111] ? __die+0x23/0x70 [66303.927140] ? page_fault_oops+0x171/0x4e0 [66303.927176] ? exc_page_fault+0x7f/0x180 [66303.927209] ? asm_exc_page_fault+0x26/0x30 [66303.927244] ? ice_get_ringparam+0x22/0x50 [ice] [66303.927433] rings_prepare_data+0x62/0x80 [66303.927469] ethnl_default_doit+0xe2/0x350 [66303.927501] genl_family_rcv_msg_doit.isra.0+0xe3/0x140 [66303.927538] genl_rcv_msg+0x1b1/0x2c0 [66303.927561] ? __pfx_ethnl_default_doit+0x10/0x10 [66303.927590] ? __pfx_genl_rcv_msg+0x10/0x10 [66303.927615] netlink_rcv_skb+0x58/0x110 [66303.927644] genl_rcv+0x28/0x40 [66303.927665] netlink_unicast+0x19e/0x290 [66303.927691] netlink_sendmsg+0x254/0x4d0 [66303.927717] sock_sendmsg+0x93/0xa0 [66303.927743] __sys_sendto+0x126/0x170 [66303.927780] __x64_sys_sendto+0x24/0x30 [66303.928593] do_syscall_64+0x5d/0x90 [66303.929370] ? __count_memcg_events+0x60/0xa0 [66303.930146] ? count_memcg_events.constprop.0+0x1a/0x30 [66303.930920] ? handle_mm_fault+0x9e/0x350 [66303.931688] ? do_user_addr_fault+0x258/0x740 [66303.932452] ? exc_page_fault+0x7f/0x180 [66303.933193] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixes: 5b246e533d01 ("ice: split probe into smaller functions") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-05ice: Fix tx queue rate limit when TCs are configuredSridhar Samudrala1-0/+7
Configuring tx_maxrate via sysfs interface /sys/class/net/eth0/queues/tx-1/tx_maxrate was not working when TCs are configured because always main VSI was being used. Fix by using correct VSI in ice_set_tx_maxrate when TCs are configured. Fixes: 1ddef455f4a8 ("ice: Add NDO callback to set the maximum per-queue bitrate") Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-05ice: Fix max_rate check while configuring TX rate limitsSridhar Samudrala1-8/+8
Remove incorrect check in ice_validate_mqprio_opt() that limits filter configuration when sum of max_rates of all TCs exceeds the link speed. The max rate of each TC is unrelated to value used by other TCs and is valid as long as it is less than link speed. Fixes: fbc7b27af0f9 ("ice: enable ndo_setup_tc support for mqprio_qdisc") Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-22ice: use ice_down_up() where applicableMaciej Fijalkowski1-15/+3
ice_change_mtu() is currently using a separate ice_down() and ice_up() calls to reflect changed MTU. ice_down_up() serves this purpose, so do the refactoring here. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-22ice: allow hot-swapping XDP programsMaciej Fijalkowski1-10/+9
Currently ice driver's .ndo_bpf callback brings interface down and up independently of XDP resources' presence. This is only needed when either these resources have to be configured or removed. It means that if one is switching XDP programs on-the-fly with running traffic, packets will be dropped. To avoid this, compare early on ice_xdp_setup_prog() state of incoming bpf_prog pointer vs the bpf_prog pointer that is already assigned to VSI. Do the swap in case VSI has bpf_prog and incoming one are non-NULL. Lastly, while at it, put old bpf_prog *after* the update of Rx ring's bpf_prog pointer. In theory previous code could expose us to a state where Rx ring's bpf_prog would still be referring to old_prog that got released with earlier bpf_prog_put(). Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-15ice: remove unnecessary check for old MAC == new MACPiotr Gardocki1-5/+0
The check has been moved to core. The ndo_set_mac_address callback is not being called with new MAC address equal to the old one anymore. Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.