aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/atheros
AgeCommit message (Collapse)AuthorFilesLines
2024-09-13net: ag71xx: remove dead code pathQianqiang Liu1-9/+4
The "err" is always zero, so the following branch can never be executed: if (err) { ndev->stats.rx_dropped++; kfree_skb(skb); } Therefore, the "if" statement can be removed. Use "ndev->stats.rx_errors" to count "napi_build_skb()" failure Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Vadim Fedorenko <[email protected]> Reviewed-by: Oleksij Rempel <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Qianqiang Liu <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-09net: ag71xx: disable napi interrupts during probeSven Eckelmann1-0/+6
ag71xx_probe is registering ag71xx_interrupt as handler for gmac0/gmac1 interrupts. The handler is trying to use napi_schedule to handle the processing of packets. But the netif_napi_add for this device is called a lot later in ag71xx_probe. It can therefore happen that a still running gmac0/gmac1 is triggering the interrupt handler with a bit from AG71XX_INT_POLL set in AG71XX_REG_INT_STATUS. The handler will then call napi_schedule and the napi code will crash the system because the ag->napi is not yet initialized. The gmcc0/gmac1 must be brought in a state in which it doesn't signal a AG71XX_INT_POLL related status bits as interrupt before registering the interrupt handler. ag71xx_hw_start will take care of re-initializing the AG71XX_REG_INT_ENABLE. This will become relevant when dual GMAC devices get added here. Signed-off-by: Sven Eckelmann <[email protected]> Signed-off-by: Rosen Penev <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-09net: ag71xx: remove always true branchRosen Penev1-6/+4
The opposite of this condition is checked above and if true, function returns. Which means this can never be false. Signed-off-by: Rosen Penev <[email protected]> Reviewed-by: Oleksij Rempel <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-09net: ag71xx: get reset control using devm apiRosen Penev1-7/+7
Currently, the of variant is missing reset_control_put in error paths. The devm variant does not require it. Allows removing mdio_reset from the struct as it is not used outside the function. Signed-off-by: Rosen Penev <[email protected]> Reviewed-by: Oleksij Rempel <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-09net: ag71xx: use ethtool_putsRosen Penev1-2/+1
Allows simplifying get_strings and avoids manual pointer manipulation. Signed-off-by: Rosen Penev <[email protected]> Reviewed-by: Oleksij Rempel <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-09net: ag71xx: update FIFO bits and descriptionsRosen Penev1-24/+24
Taken from QCA SDK. No functional difference as same bits get applied. Signed-off-by: Rosen Penev <[email protected]> Reviewed-by: Oleksij Rempel <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-09net: ag71xx: add MODULE_DESCRIPTIONRosen Penev1-0/+1
Now that COMPILE_TEST is enabled, it gets flagged when building with allmodconfig W=1 builds. Text taken from the beginning of the file. Signed-off-by: Rosen Penev <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-09net: ag71xx: add COMPILE_TEST to test compilationRosen Penev1-2/+2
While this driver is meant for MIPS only, it can be compiled on x86 just fine. Remove pointless parentheses while at it. Enables CI building of this driver. Signed-off-by: Rosen Penev <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-08-27net: ag71xx: fix module autoloadingLiao Chen1-0/+1
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-08-27net: ag71xx: support probe defferal for getting MAC addressRosen Penev1-0/+2
Currently, of_get_ethdev_address() return is checked for any return error code which means that trying to get the MAC from NVMEM cells that is backed by MTD will fail if it was not probed before ag71xx. So, lets check the return error code for EPROBE_DEFER and defer the ag71xx probe in that case until the underlying NVMEM device is live. Signed-off-by: Robert Marko <[email protected]> Signed-off-by: Rosen Penev <[email protected]> Reviewed-by: Oleksij Rempel <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-08-26net: ag71xx: move clk_eth out of structRosen Penev1-4/+4
It's only used in one place. It doesn't need to be in the struct. Signed-off-by: Rosen Penev <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-08-16net: ag71xx: use devm for register_netdevRosen Penev1-13/+1
Allows completely removing the remove function. Nothing is being done manually now. Tested on TP-LINK Archer C7v2. Signed-off-by: Rosen Penev <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-08-16net: ag71xx: use devm for of_mdiobus_registerRosen Penev1-20/+3
Allows removing ag71xx_mdio_remove. Removed ag.mii_bus variable. Local one can be used with devm. Easier to reason about as mii_bus is only used here now. Also shrinks the struct slightly. Signed-off-by: Rosen Penev <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-08-16net: ag71xx: devm_clk_get_enabledRosen Penev1-30/+7
Allows removal of clk_prepare_enable to simplify the code slightly. Tested on a TP-LINK Archer C7v2. Signed-off-by: Rosen Penev <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-08-09net: ag71xx: use phylink_mii_ioctlRosen Penev1-1/+8
f1294617d2f38bd2b9f6cce516b0326858b61182 removed the custom function for ndo_eth_ioctl and used the standard phy_do_ioctl which calls phy_mii_ioctl. However since then, this driver was ported to phylink where it makes more sense to call phylink_mii_ioctl. Bring back custom function that calls phylink_mii_ioctl. Signed-off-by: Rosen Penev <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-05-21Merge tag 'pci-v6.10-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet6-6/+6
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Simon Horman <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Reviewed-by: Jacob Keller <[email protected]> Reviewed-by: Sabrina Dubroca <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Shannon Nelson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-04-25net: alx: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACYDamien Le Moal1-1/+1
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2023-12-15ethernet: atheros: fix a memleak in atl1e_setup_ring_resourcesZhipeng Lu1-1/+4
In the error handling of 'offset > adapter->ring_size', the tx_ring->tx_buffer allocated by kzalloc should be freed, instead of 'goto failed' instantly. Fixes: a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver") Signed-off-by: Zhipeng Lu <[email protected]> Reviewed-by: Suman Ghosh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-11netdev: use napi_schedule bool instead of napi_schedule_prep/__napi_scheduleChristian Marangi1-3/+1
Replace if condition of napi_schedule_prep/__napi_schedule and use bool from napi_schedule directly where possible. Signed-off-by: Christian Marangi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-06net: atheros: replace deprecated strncpy with strscpyJustin Stitt1-1/+1
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect netdev->name to be NUL-terminated based on its use with format strings and dev_info(): | dev_info(&adapter->pdev->dev, | "%s link is up %d Mbps %s\n", | netdev->name, adapter->link_speed, | adapter->link_duplex == FULL_DUPLEX ? | "full duplex" : "half duplex"); Furthermore, NUL-padding is not required as netdev is already zero-initialized through alloc_etherdev(). Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <[email protected]> Reviewed-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-atheros-atlx-atl2-c-v1-1-493f113ebfc7@google.com Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-01net: atl1c: switch to napi_consume_skb()Sieng-Piaw Liew1-6/+7
Switch to napi_consume_skb() to take advantage of bulk free, and skb reuse through skb cache in conjunction with napi_build_skb(). When parameter 'budget' = 0, indicating non-NAPI context, dev_consume_skb_any() is called internally. Signed-off-by: Sieng-Piaw Liew <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-09-20net: ethernet: atheros: Convert to platform remove callback returning voidUwe Kleine-König1-5/+3
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-09-14atl1c: Work around the DMA RX overflow issueSieng-Piaw Liew2-54/+16
This is based on alx driver commit 881d0327db37 ("net: alx: Work around the DMA RX overflow issue"). The alx and atl1c drivers had RX overflow error which was why a custom allocator was created to avoid certain addresses. The simpler workaround then created for alx driver, but not for atl1c due to lack of tester. Instead of using a custom allocator, check the allocated skb address and use skb_reserve() to move away from problematic 0x...fc0 address. Tested on AR8131 on Acer 4540. Signed-off-by: Sieng-Piaw Liew <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-08-22alx: fix OOB-read compiler warningGONG, Ruiqi1-3/+2
The following message shows up when compiling with W=1: In function ‘fortify_memcpy_chk’, inlined from ‘alx_get_ethtool_stats’ at drivers/net/ethernet/atheros/alx/ethtool.c:297:2: ./include/linux/fortify-string.h:592:4: error: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning] 592 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In order to get alx stats altogether, alx_get_ethtool_stats() reads beyond hw->stats.rx_ok. Fix this warning by directly copying hw->stats, and refactor the unnecessarily complicated BUILD_BUG_ON btw. Signed-off-by: GONG, Ruiqi <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-07-27net: Explicitly include correct DT includesRob Herring1-1/+2
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Alex Elder <[email protected]> Reviewed-by: Bhupesh Sharma <[email protected]> Reviewed-by: Wei Fang <[email protected]> Signed-off-by: Rob Herring <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-24ethernet: atheros: fix return value check in atl1e_tso_csum()Yuanjun Gong1-2/+5
in atl1e_tso_csum, it should check the return value of pskb_trim(), and return an error code if an unexpected value is returned by pskb_trim(). Fixes: a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver") Signed-off-by: Yuanjun Gong <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-24atheros: fix return value check in atl1_tso()Yuanjun Gong1-2/+5
in atl1_tso(), it should check the return value of pskb_trim(), and return an error code if an unexpected value is returned by pskb_trim(). Fixes: 401c0aabec4b ("atl1: simplify tx packet descriptor") Signed-off-by: Yuanjun Gong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-24ethernet: atheros: fix return value check in atl1c_tso_csum()Yuanjun Gong1-2/+5
in atl1c_tso_csum, it should check the return value of pskb_trim(), and return an error code if an unexpected value is returned by pskb_trim(). Signed-off-by: Yuanjun Gong <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-21net: atheros: atl1c: remove unused atl1c_irq_reset functionTom Rix1-10/+0
clang with W=1 reports drivers/net/ethernet/atheros/atl1c/atl1c_main.c:214:20: error: unused function 'atl1c_irq_reset' [-Werror,-Wunused-function] static inline void atl1c_irq_reset(struct atl1c_adapter *adapter) ^ This function is not used, so remove it. Signed-off-by: Tom Rix <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-08alx: Drop redundant pci_enable_pcie_error_reporting()Bjorn Helgaas1-4/+0
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by: Bjorn Helgaas <[email protected]> Cc: Chris Snook <[email protected]> Acked-by: Jesse Brandeburg <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-12-19net: alx: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Christoph Heiss1-8/+2
Using these macros allows to remove an #ifdef-guard on CONFIG_PM_SLEEP. No functional changes. Signed-off-by: Christoph Heiss <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+2
include/linux/bpf.h 1f6e04a1c7b8 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value") aa3496accc41 ("bpf: Refactor kptr_off_tab into btf_record") f71b2f64177a ("bpf: Refactor map->off_arr handling") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2022-11-15net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ↵Liu Jian1-1/+2
ag71xx_open() If ag71xx_hw_enable() fails, call phylink_disconnect_phy() to clean up. And if phylink_of_phy_connect() fails, nothing needs to be done. Compile tested only. Fixes: 892e09153fa3 ("net: ag71xx: port to phylink") Signed-off-by: Liu Jian <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-11-07net: remove explicit phylink_generic_validate() referencesRussell King (Oracle)1-1/+0
Virtually all conventional network drivers are now converted to use phylink_generic_validate() - only DSA drivers and fman_memac remain, so lets remove the necessity for network drivers to explicitly set this member, and default to phylink_generic_validate() when unset. This is possible as .validate must currently be set. Any remaining instances that have not been addressed by this patch can be fixed up later. Signed-off-by: Russell King (Oracle) <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+5
Merge in the left-over fixes before the net-next pull-request. Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c ae3ed15da588 ("net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear") 9d8cb4c096ab ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc") https://lore.kernel.org/all/[email protected]/ kernel/bpf/helpers.c 8addbfc7b308 ("bpf: Gate dynptr API behind CAP_BPF") 5679ff2f138f ("bpf: Move bpf_loop and bpf_for_each_map_elem under CAP_BPF") 8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-29eth: alx: take rtnl_lock on resumeJakub Kicinski1-0/+5
Zbynek reports that alx trips an rtnl assertion on resume: RTNL: assertion failed at net/core/dev.c (2891) RIP: 0010:netif_set_real_num_tx_queues+0x1ac/0x1c0 Call Trace: <TASK> __alx_open+0x230/0x570 [alx] alx_resume+0x54/0x80 [alx] ? pci_legacy_resume+0x80/0x80 dpm_run_callback+0x4a/0x150 device_resume+0x8b/0x190 async_resume+0x19/0x30 async_run_entry_fn+0x30/0x130 process_one_work+0x1e5/0x3b0 indeed the driver does not hold rtnl_lock during its internal close and re-open functions during suspend/resume. Note that this is not a huge bug as the driver implements its own locking, and does not implement changing the number of queues, but we need to silence the splat. Fixes: 4a5fe57e7751 ("alx: use fine-grained locking instead of RTNL") Reported-and-tested-by: Zbynek Michl <[email protected]> Reviewed-by: Niels Dossche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski4-4/+4
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <[email protected]> # for CAN Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang5-12/+12
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Petr Machata <[email protected]> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <[email protected]> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <[email protected]> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <[email protected]> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <[email protected]> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <[email protected]> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <[email protected]> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-18atl1c: use netif_napi_add_tx() for Tx NAPISieng-Piaw Liew1-2/+2
Use netif_napi_add_tx() for NAPI in Tx direction instead of the regular netif_napi_add() function. Signed-off-by: Sieng-Piaw Liew <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-07-08net: ag71xx: switch to napi_build_skb() to reuse skbuff_headsSieng-Piaw Liew1-5/+5
napi_build_skb() reuses NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. Use napi_consume_skb() to feed the cache with skbuff_heads of completed Tx, so it's never empty. The budget parameter is added to indicate NAPI context, as a value of zero can be passed in the case of netpoll. Signed-off-by: Sieng-Piaw Liew <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-07-02net: add skb_[inner_]tcp_all_headers helpersEric Dumazet3-12/+12
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-30atheros/atl1e:fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'slot'. Signed-off-by: Jilin Yuan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-30atheros/atl1c:fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'slot'. Signed-off-by: Jilin Yuan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-06-17net: ag71xx: fix discards 'const' qualifier warningOleksij Rempel1-1/+1
Current kernel will compile this driver with warnings. This patch will fix it. drivers/net/ethernet/atheros/ag71xx.c: In function 'ag71xx_fast_reset': drivers/net/ethernet/atheros/ag71xx.c:996:31: warning: passing argument 2 of 'ag71xx_hw_set _macaddr' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 996 | ag71xx_hw_set_macaddr(ag, dev->dev_addr); | ~~~^~~~~~~~~~ drivers/net/ethernet/atheros/ag71xx.c:951:69: note: expected 'unsigned char *' but argument is of type 'const unsigned char *' 951 | static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac) | ~~~~~~~~~~~~~~~^~~ drivers/net/ethernet/atheros/ag71xx.c: In function 'ag71xx_open': drivers/net/ethernet/atheros/ag71xx.c:1441:32: warning: passing argument 2 of 'ag71xx_hw_se t_macaddr' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 1441 | ag71xx_hw_set_macaddr(ag, ndev->dev_addr); | ~~~~^~~~~~~~~~ drivers/net/ethernet/atheros/ag71xx.c:951:69: note: expected 'unsigned char *' but argument is of type 'const unsigned char *' 951 | static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac) | ~~~~~~~~~~~~~~~^~~ Fixes: adeef3e32146 ("net: constify netdev->dev_addr") Signed-off-by: Oleksij Rempel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-08eth: switch to netif_napi_add_weight()Jakub Kicinski1-1/+2
Switch all Ethernet drivers which use custom napi weights to the new API. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-06net: make drivers set the TSO limit not the GSO limitJakub Kicinski1-1/+1
Drivers should call the TSO setting helper, GSO is controllable by user space. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-03-18atl1c: remove redundant assignment to variable sizeColin Ian King1-1/+1
Variable sie is being assigned a value that is never read. The The assignment is redundant and can be removed. Cleans up clang scan build warning: drivers/net/ethernet/atheros/atl1c/atl1c_main.c:1054:22: warning: Although the value stored to 'size' is used in the enclosing expression, the value is never actually read from 'size' [deadcode.DeadStores] Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-11alx: acquire mutex for alx_reinit in alx_change_mtuNiels Dossche1-1/+4
alx_reinit has a lockdep assertion that the alx->mtx mutex must be held. alx_reinit is called from two places: alx_reset and alx_change_mtu. alx_reset does acquire alx->mtx before calling alx_reinit. alx_change_mtu does not acquire this mutex, nor do its callers or any path towards alx_change_mtu. Acquire the mutex in alx_change_mtu. The issue was introduced when the fine-grained locking was introduced to the code to replace the RTNL. The same commit also introduced the lockdep assertion. Fixes: 4a5fe57e7751 ("alx: use fine-grained locking instead of RTNL") Signed-off-by: Niels Dossche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-11atl1c: fix tx timeout after link flap on Mikrotik 10/25G NICGatis Peisenieks1-1/+1
If NIC had packets in tx queue at the moment link down event happened, it could result in tx timeout when link got back up. Since device has more than one tx queue we need to reset them accordingly. Fixes: 057f4af2b171 ("atl1c: add 4 RX/TX queue support for Mikrotik 10/25G NIC") Signed-off-by: Gatis Peisenieks <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.