aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc/core
AgeCommit message (Collapse)AuthorFilesLines
2024-10-03mmc: core: Only set maximum DMA segment size if DMA is supportedGuenter Roeck1-1/+2
Since upstream commit 334304ac2bac ("dma-mapping: don't return errors from dma_set_max_seg_size") calling dma_set_max_seg_size() on a device not supporting DMA results in a warning traceback. This is seen when booting the sifive_u machine from SD. The underlying SPI controller (sifive,spi0 compatible) explicitly sets dma_mask to NULL. Avoid the backtrace by only calling dma_set_max_seg_size() if DMA is supported. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 334304ac2bac ("dma-mapping: don't return errors from dma_set_max_seg_size") Link: https://lore.kernel.org/r/20240924210123.2288529-1-linux@roeck-us.net Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-09-27[tree-wide] finally take no_llseek outAl Viro1-1/+0
no_llseek had been defined to NULL two years ago, in commit 868941b14441 ("fs: remove no_llseek") To quote that commit, At -rc1 we'll need do a mechanical removal of no_llseek - git grep -l -w no_llseek | grep -v porting.rst | while read i; do sed -i '/\<no_llseek\>/d' $i done would do it. Unfortunately, that hadn't been done. Linus, could you do that now, so that we could finally put that thing to rest? All instances are of the form .llseek = no_llseek, so it's obviously safe. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-09-13mmc: core: Use dev_err_probe for deferred regulatorsAlexander Stein1-2/+6
In case vmmc or vqmmc regulator is not available yet, use dev_err_probe in order to set a deferred probe reason. This is a helpful hint in /sys/kernel/debug/devices_deferred Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20240911090910.3060749-1-alexander.stein@ew.tq-group.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-09-03mmc: block: add RPMB dependencyJens Wiklander1-0/+1
Prevent build error when CONFIG_RPMB=m and CONFIG_MMC_BLOCK=y by adding a dependency to CONFIG_RPMB for CONFIG_MMC_BLOCK block so the RPMB subsystem always is reachable if configured. This means that CONFIG_MMC_BLOCK automatically becomes compiled as a module if CONFIG_RPMB is compiled as a module. If CONFIG_RPMB isn't configured or is configured as built-in, CONFIG_MMC_BLOCK will remain unchanged. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202409021448.RSvcBPzt-lkp@intel.com/ Fixes: 7852028a35f0 ("mmc: block: register RPMB partition with the RPMB subsystem") Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240902151231.3705204-1-jens.wiklander@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-09-03mmc: core Convert UNSTUFF_BITS macro to inline functionAvri Altman3-127/+113
The UNSTUFF_BITS macro, which is defined in both drivers/mmc/core/mmc.c and drivers/mmc/core/sd.c, has been converted to an inline function to improve readability, maintainability, and type safety. Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20240902123331.3566447-1-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-09-03mmc: core: Convert simple_stroul to kstroulRiyan Dhiman1-3/+3
simple_strtoul() is obsolete and lacks proper error handling, making it unsafe for converting strings to unsigned long values. Replace it with kstrtoul(), which provides robust error checking and better safety. This change improves the reliability of the string-to-integer conversion and aligns with current kernel coding standards. Error handling is added to catch conversion failures, returning -EINVAL when input is invalid. Issue reported by checkpatch: - WARNING: simple_strtoul is obsolete, use kstrtoul instead Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com> Link: https://lore.kernel.org/r/20240901182244.45543-1-riyandhiman14@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-09-03mmc: core: Calculate size from pointerRiyan Dhiman1-1/+1
Calculate the size from pointer instead of struct to adhere to linux kernel coding style. Issue reported by checkpatch. This commit has no functional changes. Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com> Link: https://lore.kernel.org/r/20240901173309.7124-1-riyandhiman14@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-09-03mmc: core: Replace the argument of mmc_sd_switch() with definesChanwoo Lee2-7/+9
Replace with already defined values for readability. While at it, let's also change the mode-parameter from an int to bool, as the only used values are 0 or 1. Signed-off-by: Chanwoo Lee <cw9316.lee@samsung.com> Link: https://lore.kernel.org/r/20240829024709.402285-1-cw9316.lee@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-08-26mmc: block: register RPMB partition with the RPMB subsystemJens Wiklander1-2/+240
Register eMMC RPMB partition with the RPMB subsystem and provide an implementation for the RPMB access operations abstracting the actual multi step process. Add a callback to extract the needed device information at registration to avoid accessing the struct mmc_card at a later stage as we're not holding a reference counter for this struct. Taking the needed reference to md->disk in mmc_blk_alloc_rpmb_part() instead of in mmc_rpmb_chrdev_open(). This is needed by the route_frames() function pointer in struct rpmb_ops. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Tested-by: Manuel Traut <manut@mecka.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20240814153558.708365-3-jens.wiklander@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-08-26mmc: core: apply SD quirks earlier during probeJonathan Bell2-9/+17
Applying MMC_QUIRK_BROKEN_SD_CACHE is broken, as the card's SD quirks are referenced in sd_parse_ext_reg_perf() prior to the quirks being initialized in mmc_blk_probe(). To fix this problem, let's split out an SD-specific list of quirks and apply in mmc_sd_init_card() instead. In this way, sd_read_ext_regs() to has the available information for not assigning the SD_EXT_PERF_CACHE as one of the (un)supported features, which in turn allows mmc_sd_init_card() to properly skip execution of sd_enable_cache(). Fixes: c467c8f08185 ("mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019") Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com> Co-developed-by: Keita Aihara <keita.aihara@sony.com> Signed-off-by: Keita Aihara <keita.aihara@sony.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240820230631.GA436523@sony.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-08-20mmc: mmc_test: Fix NULL dereference on allocation failureDan Carpenter1-4/+5
If the "test->highmem = alloc_pages()" allocation fails then calling __free_pages(test->highmem) will result in a NULL dereference. Also change the error code to -ENOMEM instead of returning success. Fixes: 2661081f5ab9 ("mmc_test: highmem tests") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/8c90be28-67b4-4b0d-a105-034dc72a0b31@stanley.mountain Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-07-25Merge tag 'driver-core-6.11-rc1' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 6.11-rc1. Lots of stuff in here, with not a huge diffstat, but apis are evolving which required lots of files to be touched. Highlights of the changes in here are: - platform remove callback api final fixups (Uwe took many releases to get here, finally!) - Rust bindings for basic firmware apis and initial driver-core interactions. It's not all that useful for a "write a whole driver in rust" type of thing, but the firmware bindings do help out the phy rust drivers, and the driver core bindings give a solid base on which others can start their work. There is still a long way to go here before we have a multitude of rust drivers being added, but it's a great first step. - driver core const api changes. This reached across all bus types, and there are some fix-ups for some not-common bus types that linux-next and 0-day testing shook out. This work is being done to help make the rust bindings more safe, as well as the C code, moving toward the end-goal of allowing us to put driver structures into read-only memory. We aren't there yet, but are getting closer. - minor devres cleanups and fixes found by code inspection - arch_topology minor changes - other minor driver core cleanups All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) ARM: sa1100: make match function take a const pointer sysfs/cpu: Make crash_hotplug attribute world-readable dio: Have dio_bus_match() callback take a const * zorro: make match function take a const pointer driver core: module: make module_[add|remove]_driver take a const * driver core: make driver_find_device() take a const * driver core: make driver_[create|remove]_file take a const * firmware_loader: fix soundness issue in `request_internal` firmware_loader: annotate doctests as `no_run` devres: Correct code style for functions that return a pointer type devres: Initialize an uninitialized struct member devres: Fix memory leakage caused by driver API devm_free_percpu() devres: Fix devm_krealloc() wasting memory driver core: platform: Switch to use kmemdup_array() driver core: have match() callback in struct bus_type take a const * MAINTAINERS: add Rust device abstractions to DRIVER CORE device: rust: improve safety comments MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER firmware: rust: improve safety comments ...
2024-07-15Merge tag 'mmc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds5-0/+5
Pull MMC updates from Ulf Hansson: "MMC host: - Convert from using tasklet to the BH workqueue - dw_mmc-bluefield: Add support for eMMC HW reset - mmc_spi: Allow spi controllers incapable of lower than 400kHz - sdhci: Rework code to eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT - sdhci-brcmstb: Add support for the BCM2712 variant - sdhci-esdhc-imx: Disable card-detect as system wakeup on S32G platforms - sdhci-msm: Add support for the SDX75 variant - sdhci-of-dwcmshc: Enable CQE support for some Rockchip variants - sdhci-of-esdhc: Convert DT-bindings to yaml - sdhci-sprd: Convert DT-bindings to yaml MEMSTICK: - rtsx_pci_ms: Remove the unused Realtek PCI memstick driver" * tag 'mmc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (26 commits) MAINTAINERS: add 's32@nxp.com' as relevant mailing list for 'sdhci-esdhc-imx' driver mmc: sdhci-esdhc-imx: obtain the 'per' clock rate after its enablement mmc: sdhci-esdhc-imx: disable card detect wake for S32G based platforms dt-bindings: mmc: sdhci-sprd: convert to YAML mmc: davinci_mmc: report all possible bus widths mmc: dw_mmc-bluefield: Add support for eMMC HW reset mmc: dw_mmc: Add support for platform specific eMMC HW reset mmc: sdhci_am654: Constify struct regmap_config mmc: Convert from tasklet to BH workqueue mmc: sdhi: Convert from tasklet to BH workqueue mmc: mmc_spi: allow for spi controllers incapable of getting as low as 400k memstick: rtsx_pci_ms: Remove Realtek PCI memstick driver MAINTAINERS: drop entry for VIA SD/MMC controller mmc: tmio: Remove obsolete .set_pwr() callback() mfd: tmio: Remove obsolete .set_clk_div() callback mmc: sdhci-brcmstb: Add ARCH_BCM2835 option mmc: sdhci: Eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT dt-bindings: mmc: Convert fsl-esdhc.txt to yaml dt-bindings: mmc: mmc-spi-slot: Change voltage-ranges to uint32-matrix mmc: add missing MODULE_DESCRIPTION() macros ...
2024-07-03driver core: have match() callback in struct bus_type take a const *Greg Kroah-Hartman1-5/+5
In the match() callback, the struct device_driver * should not be changed, so change the function callback to be a const *. This is one step of many towards making the driver core safe to have struct device_driver in read-only memory. Because the match() callback is in all busses, all busses are modified to handle this properly. This does entail switching some container_of() calls to container_of_const() to properly handle the constant *. For some busses, like PCI and USB and HV, the const * is cast away in the match callback as those busses do want to modify those structures at this point in time (they have a local lock in the driver structure.) That will have to be changed in the future if they wish to have their struct device * in read-only-memory. Cc: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Alex Elder <elder@kernel.org> Acked-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-20mmc: add missing MODULE_DESCRIPTION() macrosJeff Johnson5-0/+5
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/host/of_mmc_spi.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/host/tmio_mmc_core.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/host/renesas_sdhi_core.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/mmc_core.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/pwrseq_simple.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/pwrseq_sd8787.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/pwrseq_emmc.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/sdio_uart.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # for TMIO and SDHI Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/20240611-md-drivers-mmc-v2-1-2ef2cbcdc061@quicinc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-06-19block: move the stable_writes flag to queue_limitsChristoph Hellwig1-2/+3
Move the stable_writes flag into the queue_limits feature field so that it can be set atomically with the queue frozen. The flag is now inherited by blk_stack_limits, which greatly simplifies the code in dm, and fixed md which previously did not pass on the flag set on lower devices. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20240617060532.127975-18-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-19block: move the add_random flag to queue_limitsChristoph Hellwig1-2/+0
Move the add_random flag into the queue_limits feature field so that it can be set atomically with the queue frozen. Note that this also removes code from dm to clear the flag based on the underlying devices, which can't be reached as dm devices will always start out without the flag set. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20240617060532.127975-16-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-19block: move the nonrot flag to queue_limitsChristoph Hellwig1-1/+0
Move the nonrot flag into the queue_limits feature field so that it can be set atomically with the queue frozen. Use the chance to switch to defaulting to non-rotational and require the driver to opt into rotational, which matches the polarity of the sysfs interface. For the z2ram, ps3vram, 2x memstick, ubiblock and dcssblk the new rotational flag is not set as they clearly are not rotational despite this being a behavior change. There are some other drivers that unconditionally set the rotational flag to keep the existing behavior as they arguably can be used on rotational devices even if that is probably not their main use today (e.g. virtio_blk and drbd). The flag is automatically inherited in blk_stack_limits matching the existing behavior in dm and md. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20240617060532.127975-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-06-19block: move cache control settings out of queue->flagsChristoph Hellwig3-28/+29
Move the cache control settings into the queue_limits so that the flags can be set atomically with the device queue frozen. Add new features and flags field for the driver set flags, and internal (usually sysfs-controlled) flags in the block layer. Note that we'll eventually remove enough field from queue_limits to bring it back to the previous size. The disable flag is inverted compared to the previous meaning, which means it now survives a rescan, similar to the max_sectors and max_discard_sectors user limits. The FLUSH and FUA flags are now inherited by blk_stack_limits, which simplified the code in dm a lot, but also causes a slight behavior change in that dm-switch and dm-unstripe now advertise a write cache despite setting num_flush_bios to 0. The I/O path will handle this gracefully, but as far as I can tell the lack of num_flush_bios and thus flush support is a pre-existing data integrity bug in those targets that really needs fixing, after which a non-zero num_flush_bios should be required in dm for targets that map to underlying devices. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20240617060532.127975-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-03mmc: core: Increase the timeout period of the ACMD41 commandFelix Qin1-1/+6
Extensive testing has shown that some specific SD cards require an increased command timeout to be successfully initialized. More info: Platform: Rockchip SoC + DW Multimedia host Controller SD card: Xvv microSD CMH34A17TMA12 (Made in Korea) Note: The SD card is custom-made by the customer in collaboration with the wafer foundry. Signed-off-by: Felix Qin <xiaokeqinhealth@126.com> Acked-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/20240429071955.163282-1-xiaokeqinhealth@126.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-05-03mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND tooUlf Hansson1-27/+51
Similar to what has already been changed for eMMC and the MMC_SEND_OP_COND (CMD1), let's convert the SD_APP_OP_COND (ACMD41) for SD cards to use the common __mmc_poll_for_busy() too. This change means the initial delay period, that starts as 10ms will now increase for every loop when being busy. The total accepted timeout for being busy is 1s, which is according to the SD spec. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Felix Qin <xiaokeqinhealth@126.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/20240425133034.79599-1-ulf.hansson@linaro.org
2024-04-26mmc: slot-gpio: Use irq_handler_t typeAndy Shevchenko1-3/+2
The irq_handler_t is already defined globally, let's use it in slot-gpio code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20240410195618.1632778-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-26mmc: core: Add mmc_gpiod_set_cd_config() functionHans de Goede1-0/+20
Some mmc host drivers may need to fixup a card-detection GPIO's config to e.g. enable the GPIO controllers builtin pull-up resistor on devices where the firmware description of the GPIO is broken (e.g. GpioInt with PullNone instead of PullUp in ACPI DSDT). Since this is the exception rather then the rule adding a config parameter to mmc_gpiod_request_cd() seems undesirable, so instead add a new mmc_gpiod_set_cd_config() function. This is simply a wrapper to call gpiod_set_config() on the card-detect GPIO acquired through mmc_gpiod_request_cd(). Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-2-hdegoede@redhat.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02mmc: sdio: store owner from modules with sdio_register_driver()Krzysztof Kozlowski1-3/+6
Modules registering driver with sdio_register_driver() might forget to set .owner field. The field is used by some of other kernel parts for reference counting (try_module_get()), so it is expected that drivers will set it. Solve the problem by moving this task away from the drivers to the core code, just like we did for platform_driver in commit 9447057eaff8 ("platform_device: use a macro instead of platform_driver_register"). Since many drivers forget to set the .owner, this effectively will fix them. Examples of fixed drivers are: ath6kl, b43, btsdio.c, ks7010, libertas, MediaTek WiFi drivers, Realtek WiFi drivers, rsi, siano, wilc1000, wl1251 and more. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20240329-module-owner-sdio-v1-1-e4010b11ccaa@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02mmc: debugfs: add card entry for quirksRouven Czerwinski1-0/+1
This is useful to check if a quirk has been applied for the connected mmc card. Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Link: https://lore.kernel.org/r/20240326094215.212930-2-r.czerwinski@pengutronix.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02mmc: debugfs: convert permissions to octalRouven Czerwinski1-3/+3
Convert the existing symbolic permissions to the octal presentation as this is the preferred representation for debugfs permissions. Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Link: https://lore.kernel.org/r/20240326094215.212930-1-r.czerwinski@pengutronix.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02mmc: core: Convert sprintf/snprintf to sysfs_emitLi Zhijian1-4/+4
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. coccinelle complains that there are still a couple of functions that use snprintf(). Convert them to sysfs_emit(). sprintf() will be converted as weel if they have. Generally, this patch is generated by make coccicheck M=<path/to/file> MODE=patch \ COCCI=scripts/coccinelle/api/device_attr_show.cocci No functional change intended Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Link: https://lore.kernel.org/r/20240314091512.1323650-1-lizhijian@fujitsu.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-02mmc: core: Remove unused of_gpio.hAndy Shevchenko1-1/+0
of_gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240307114600.3643948-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-03-25mmc: core: Avoid negative index with array accessMikko Rapeli1-1/+1
Commit 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") assigns prev_idata = idatas[i - 1], but doesn't check that the iterator i is greater than zero. Let's fix this by adding a check. Fixes: 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") Link: https://lore.kernel.org/all/20231129092535.3278-1-avri.altman@wdc.com/ Cc: stable@vger.kernel.org Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20240313133744.2405325-2-mikko.rapeli@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-03-25mmc: core: Initialize mmc_blk_ioc_dataMikko Rapeli1-1/+1
Commit 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") adds flags uint to struct mmc_blk_ioc_data, but it does not get initialized for RPMB ioctls which now fails. Let's fix this by always initializing the struct and flags to zero. Fixes: 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218587 Link: https://lore.kernel.org/all/20231129092535.3278-1-avri.altman@wdc.com/ Cc: stable@vger.kernel.org Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20240313133744.2405325-1-mikko.rapeli@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-03-13Merge tag 'mmc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds10-28/+26
Pull MMC updates from Ulf Hansson: "MMC core: - Drop the use of BLK_BOUNCE_HIGH - Fix partition switch for GP3 - Remove usage of the deprecated ida_simple API MMC host: - cqhci: Update bouncing email-addresses in MAINTAINERS - davinci_mmc: Use sg_miter for PIO - dw_mmc-hi3798cv200: Convert the DT bindings to YAML - dw_mmc-hi3798mv200: Add driver for the new dw_mmc variant - fsl-imx-esdhc: A couple of corrections/updates to the DT bindings - meson-mx-sdhc: Drop use of the ->card_hw_reset() callback - moxart-mmc: Use sg_miter for PIO - moxart-mmc: Fix accounting for DMA transfers - mvsdio: Use sg_miter for PIO - mxcmmc: Use sg_miter for PIO - omap: Use sg_miter for PIO - renesas,sdhi: Add support for R-Car V4M variant - sdhci-esdhc-mcf: Use sg_miter for swapping - sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002 variants - sh_mmcif: Use sg_miter for PIO - tmio: Avoid concurrent runs of mmc_request_done()" * tag 'mmc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (44 commits) mmc: core: make mmc_host_class constant mmc: core: Fix switch on gp3 partition mmc: tmio: comment the ERR_PTR usage in this driver mmc: mmc_spi: Don't mention DMA direction mmc: dw_mmc: Remove unused of_gpio.h mmc: dw_mmc: add support for hi3798mv200 dt-bindings: mmc: hisilicon,hi3798cv200-dw-mshc: add Hi3798MV200 binding dt-bindings: mmc: dw-mshc-hi3798cv200: convert to YAML mmc: dw_mmc-hi3798cv200: remove MODULE_ALIAS() mmc: core: Use a struct device* as in-param to mmc_of_parse_clk_phase() mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove function mmc: tmio: avoid concurrent runs of mmc_request_done() dt-bindings: mmc: fsl-imx-mmc: Document the required clocks mmc: sh_mmcif: Advance sg_miter before reading blocks mmc: sh_mmcif: sg_miter must not be atomic mmc: sdhci-esdhc-mcf: Flag the sg_miter as atomic dt-bindings: mmc: fsl-imx-esdhc: add default and 100mhz state mmc: core: constify the struct device_type usage mmc: sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002 dt-bindings: mmc: sdhci-of-dwcmhsc: Add Sophgo CV1800B and SG2002 support ...
2024-03-11Merge tag 'for-6.9/block-20240310' of git://git.kernel.dk/linuxLinus Torvalds1-45/+52
Pull block updates from Jens Axboe: - MD pull requests via Song: - Cleanup redundant checks (Yu Kuai) - Remove deprecated headers (Marc Zyngier, Song Liu) - Concurrency fixes (Li Lingfeng) - Memory leak fix (Li Nan) - Refactor raid1 read_balance (Yu Kuai, Paul Luse) - Clean up and fix for md_ioctl (Li Nan) - Other small fixes (Gui-Dong Han, Heming Zhao) - MD atomic limits (Christoph) - NVMe pull request via Keith: - RDMA target enhancements (Max) - Fabrics fixes (Max, Guixin, Hannes) - Atomic queue_limits usage (Christoph) - Const use for class_register (Ricardo) - Identification error handling fixes (Shin'ichiro, Keith) - Improvement and cleanup for cached request handling (Christoph) - Moving towards atomic queue limits. Core changes and driver bits so far (Christoph) - Fix UAF issues in aoeblk (Chun-Yi) - Zoned fix and cleanups (Damien) - s390 dasd cleanups and fixes (Jan, Miroslav) - Block issue timestamp caching (me) - noio scope guarding for zoned IO (Johannes) - block/nvme PI improvements (Kanchan) - Ability to terminate long running discard loop (Keith) - bdev revalidation fix (Li) - Get rid of old nr_queues hack for kdump kernels (Ming) - Support for async deletion of ublk (Ming) - Improve IRQ bio recycling (Pavel) - Factor in CPU capacity for remote vs local completion (Qais) - Add shared_tags configfs entry for null_blk (Shin'ichiro - Fix for a regression in page refcounts introduced by the folio unification (Tony) - Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid, Ricardo, Roman, Tang, Uwe) * tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits) block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC block/swim: Convert to platform remove callback returning void cdrom: gdrom: Convert to platform remove callback returning void block: remove disk_stack_limits md: remove mddev->queue md: don't initialize queue limits md/raid10: use the atomic queue limit update APIs md/raid5: use the atomic queue limit update APIs md/raid1: use the atomic queue limit update APIs md/raid0: use the atomic queue limit update APIs md: add queue limit helpers md: add a mddev_is_dm helper md: add a mddev_add_trace_msg helper md: add a mddev_trace_remap helper bcache: move calculation of stripe_size and io_opt into bcache_device_init virtio_blk: Do not use disk_set_max_open/active_zones() aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts block: move capacity validation to blkpg_do_ioctl() block: prevent division by zero in blk_rq_stat_sum() drbd: atomically update queue limits in drbd_reconsider_queue_parameters ...
2024-03-06mmc: core: make mmc_host_class constantRicardo B. Marliere1-1/+1
Since commit 43a7206b0963 ("driver core: class: make class_register() take a const *"), the driver core allows for struct class to be in read-only memory, so move the mmc_host_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at boot time. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Link: https://lore.kernel.org/r/20240305-class_cleanup-mmc-v1-1-4a66e7122ff3@marliere.net Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-03-06mmc: Merge branch fixes into nextUlf Hansson1-4/+6
Merge the mmc fixes for v6.8-rc[n] into the next branch, to allow them to get tested together with the new mmc changes that are targeted for v6.9. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-03-06mmc: core: Fix switch on gp3 partitionDominique Martinet1-4/+6
Commit e7794c14fd73 ("mmc: rpmb: fixes pause retune on all RPMB partitions.") added a mask check for 'part_type', but the mask used was wrong leading to the code intended for rpmb also being executed for GP3. On some MMCs (but not all) this would make gp3 partition inaccessible: armadillo:~# head -c 1 < /dev/mmcblk2gp3 head: standard input: I/O error armadillo:~# dmesg -c [ 422.976583] mmc2: running CQE recovery [ 423.058182] mmc2: running CQE recovery [ 423.137607] mmc2: running CQE recovery [ 423.137802] blk_update_request: I/O error, dev mmcblk2gp3, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 423.237125] mmc2: running CQE recovery [ 423.318206] mmc2: running CQE recovery [ 423.397680] mmc2: running CQE recovery [ 423.397837] blk_update_request: I/O error, dev mmcblk2gp3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 423.408287] Buffer I/O error on dev mmcblk2gp3, logical block 0, async page read the part_type values of interest here are defined as follow: main 0 boot0 1 boot1 2 rpmb 3 gp0 4 gp1 5 gp2 6 gp3 7 so mask with EXT_CSD_PART_CONFIG_ACC_MASK (7) to correctly identify rpmb Fixes: e7794c14fd73 ("mmc: rpmb: fixes pause retune on all RPMB partitions.") Cc: stable@vger.kernel.org Cc: Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240306-mmc-partswitch-v1-1-bf116985d950@codewreck.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-03-05mmc: core: Use a struct device* as in-param to mmc_of_parse_clk_phase()Yang Xiwen1-3/+1
Parsing dt usually happens very early, sometimes even before the struct mmc_host has been allocated (e.g. dw_mci_probe() and dw_mci_parse_dt() in dw_mmc.c). Looking at the source of mmc_of_parse_clk_phase(), it's actually not needed to have an initialized mmc_host, let's therefore pass a struct device* to it instead. Also update the only current user, sdhci-of-aspeed. Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Yang Xiwen <forbidden405@outlook.com> Link: https://lore.kernel.org/r/20240229-b4-mmc-hi3798mv200-v7-1-10c03f316285@outlook.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-27mmc: core: constify the struct device_type usageRicardo B. Marliere6-6/+6
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the sdio_type, sd_type and mmc_type variables to be constant structures as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Link: https://lore.kernel.org/r/20240219-device_cleanup-mmc-v1-1-1910e283cf5a@marliere.net Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-19mmc: pass queue_limits to blk_mq_alloc_diskChristoph Hellwig1-45/+52
Pass the queue limit set at initialization time directly to blk_mq_alloc_disk instead of updating it right after the allocation. This requires refactoring the code a bit so that what was mmc_setup_queue before also allocates the gendisk now and actually sets all limits. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20240215070300.2200308-18-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-13mmc: Merge branch fixes into nextUlf Hansson1-0/+2
Merge the mmc fixes for v6.8-rc[n] into the next branch, to allow them to get tested together with the new mmc changes that are targeted for v6.9. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-13mmc: core: Fix eMMC initialization with 1-bit bus connectionIvan Semenov1-0/+2
Initializing an eMMC that's connected via a 1-bit bus is current failing, if the HW (DT) informs that 4-bit bus is supported. In fact this is a regression, as we were earlier capable of falling back to 1-bit mode, when switching to 4/8-bit bus failed. Therefore, let's restore the behaviour. Log for Samsung eMMC 5.1 chip connected via 1bit bus (only D0 pin) Before patch: [134509.044225] mmc0: switch to bus width 4 failed [134509.044509] mmc0: new high speed MMC card at address 0001 [134509.054594] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB [134509.281602] mmc0: switch to bus width 4 failed [134509.282638] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.282657] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.284598] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.284602] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.284609] ldm_validate_partition_table(): Disk read failed. [134509.286495] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.286500] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.288303] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.288308] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.289540] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.289544] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.289553] mmcblk0: unable to read partition table [134509.289728] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB [134509.290283] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB [134509.294577] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [134509.295835] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.295841] Buffer I/O error on dev mmcblk0, logical block 0, async page read After patch: [134551.089613] mmc0: switch to bus width 4 failed [134551.090377] mmc0: new high speed MMC card at address 0001 [134551.102271] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB [134551.113365] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 [134551.114262] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB [134551.114925] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB Fixes: 577fb13199b1 ("mmc: rework selection of bus speed mode") Cc: stable@vger.kernel.org Signed-off-by: Ivan Semenov <ivan@semenov.dev> Link: https://lore.kernel.org/r/20240206172845.34316-1-ivan@semenov.dev Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-13block: pass a queue_limits argument to blk_mq_alloc_diskChristoph Hellwig1-1/+1
Pass a queue_limits to blk_mq_alloc_disk and apply it if non-NULL. This will allow allocating queues with valid queue limits instead of setting the values one at a time later. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20240213073425.1621680-11-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-13mmc: core: make sdio_bus_type constRicardo B. Marliere1-1/+1
Now that the driver core can properly handle constant struct bus_type, move the sdio_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240203-bus_cleanup-mmc-v1-3-ad054dce8dc3@marliere.net Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-13mmc: core: make mmc_bus_type constRicardo B. Marliere1-1/+1
Now that the driver core can properly handle constant struct bus_type, move the mmc_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240203-bus_cleanup-mmc-v1-2-ad054dce8dc3@marliere.net Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-13mmc: core: make mmc_rpmb_bus_type constRicardo B. Marliere1-1/+1
Now that the driver core can properly handle constant struct bus_type, move the mmc_rpmb_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240203-bus_cleanup-mmc-v1-1-ad054dce8dc3@marliere.net Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-13mmc: core Drop BLK_BOUNCE_HIGHLinus Walleij1-2/+0
The MMC core sets BLK_BOUNCE_HIGH for devices where dma_mask is unassigned. For the majority of MMC hosts this path is never taken: the OF core will unconditionally assign a 32-bit mask to any OF device, and most MMC hosts are probed from device tree, see drivers/of/platform.c: of_platform_device_create_pdata() dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); if (!dev->dev.dma_mask) dev->dev.dma_mask = &dev->dev.coherent_dma_mask; of_amba_device_create() dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); dev->dev.dma_mask = &dev->dev.coherent_dma_mask; MMC devices that are probed from ACPI or PCI will likewise have a proper dma_mask assigned. The only remaining devices that could have a blank dma_mask are platform devices instantiated from board files. These are mostly used on systems without CONFIG_HIGHMEM enabled which means the block layer will not bounce, and in the few cases where it is enabled it is not used anyway: for example some OMAP2 systems such as Nokia n800/n810 will create a platform_device and not assign a dma_mask, however they do not have any highmem, so no bouncing will happen anyway: the block core checks if max_low_pfn >= max_pfn and this will always be false. Should it turn out there is a platform_device with blank DMA mask actually using CONFIG_HIGHMEM somewhere out there we should set dma_mask for it, not do this trickery. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240125-mmc-no-blk-bounce-high-v1-1-d0f92a30e085@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-13mmc: core: Remove usage of the deprecated ida_simple_xx() APIChristophe JAILLET2-8/+9
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). Note that the upper limit of ida_simple_get() is exclusive, but the one of ida_alloc_range()/ida_alloc_max() is inclusive. So a -1 has been added when needed. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/583c57d0ae09f9d3a1e1a7b80c1e39ada17954b7.1705244502.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-06mmc: slot-gpio: Allow non-sleeping GPIO roAlexander Stein1-1/+5
This change uses the appropriate _cansleep or non-sleeping API for reading GPIO read-only state. This allows users with GPIOs that never sleepbeing called in atomic context. Implement the same mechanism as in commit 52af318c93e97 ("mmc: Allow non-sleeping GPIO cd"). Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240206083912.2543142-1-alexander.stein@ew.tq-group.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-18Merge tag 'tty-6.8-rc1' of ↵Linus Torvalds1-13/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.8-rc1. As usual, Jiri has a bunch of refactoring and cleanups for the tty core and drivers in here, along with the usual set of rs485 updates (someday this might work properly...) Along with those, in here are changes for: - sc16is7xx serial driver updates - platform driver removal api updates - amba-pl011 driver updates - tty driver binding updates - other small tty/serial driver updates and changes All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits) serial: sc16is7xx: refactor EFR lock serial: sc16is7xx: reorder code to remove prototype declarations serial: sc16is7xx: refactor FIFO access functions to increase commonality serial: sc16is7xx: drop unneeded MODULE_ALIAS serial: sc16is7xx: replace hardcoded divisor value with BIT() macro serial: sc16is7xx: add explicit return for some switch default cases serial: sc16is7xx: add macro for max number of UART ports serial: sc16is7xx: add driver name to struct uart_driver serial: sc16is7xx: use i2c_get_match_data() serial: sc16is7xx: use spi_get_device_match_data() serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield serial: sc16is7xx: improve do/while loop in sc16is7xx_irq() serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() serial: sc16is7xx: set safe default SPI clock frequency serial: sc16is7xx: add check for unsupported SPI modes during probe serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error serial: 8250_exar: Set missing rs485_supported flag serial: omap: do not override settings for RS485 support serial: core, imx: do not set RS485 enabled if it is not supported serial: core: make sure RS485 cannot be enabled when it is not supported ...
2024-01-03mmc: core: Do not force a retune before RPMB switchJorge Ramirez-Ortiz1-2/+1
Requesting a retune before switching to the RPMB partition has been observed to cause CRC errors on the RPMB reads (-EILSEQ). Since RPMB reads can not be retried, the clients would be directly affected by the errors. This commit disables the retune request prior to switching to the RPMB partition: mmc_retune_pause() no longer triggers a retune before the pause period begins. This was verified with the sdhci-of-arasan driver (ZynqMP) configured for HS200 using two separate eMMC cards (DG4064 and 064GB2). In both cases, the error was easy to reproduce triggering every few tenths of reads. With this commit, systems that were utilizing OP-TEE to access RPMB variables will experience an enhanced performance. Specifically, when OP-TEE is configured to employ RPMB as a secure storage solution, it not only writes the data but also the secure filesystem within the partition. As a result, retrieving any variable involves multiple RPMB reads, typically around five. For context, on ZynqMP, each retune request consumed approximately 8ms. Consequently, reading any RPMB variable used to take at the very minimum 40ms. After droping the need to retune before switching to the RPMB partition, this is no longer the case. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by: Avri Altman <avri.altman@wdc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20240103112911.2954632-1-jorge@foundries.io Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02mmc: core: Add HS400 tuning in HS400es initializationMengqi Zhang1-2/+7
During the initialization to HS400es stage, add a HS400 tuning flow as an optional process. For Mediatek IP, the HS400es mode requires a specific tuning to ensure the correct HS400 timing setting. Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.com> Link: https://lore.kernel.org/r/20231225093839.22931-2-mengqi.zhang@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Powered by cgit, Gruvboxed by Blaster4385.