| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A number of storage technologies support a specialised hardware
partition designed to be resistant to replay attacks. The underlying
HW protocols differ but the operations are common. The RPMB partition
cannot be accessed via standard block layer, but by a set of specific
RPMB commands. Such a partition provides authenticated and replay
protected access, hence suitable as a secure storage.
The initial aim of this patch is to provide a simple RPMB driver
interface which can be accessed by the optee driver to facilitate early
RPMB access to OP-TEE OS (secure OS) during the boot time.
A TEE device driver can claim the RPMB interface, for example, via
rpmb_interface_register() or rpmb_dev_find_device(). The RPMB driver
provides a callback to route RPMB frames to the RPMB device accessible
via rpmb_route_frames().
The detailed operation of implementing the access is left to the TEE
device driver itself.
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: Alex Bennée <[email protected]>
Signed-off-by: Shyam Saini <[email protected]>
Signed-off-by: Jens Wiklander <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Tested-by: Manuel Traut <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
I found one more missing dependency in the new driver: when building
without CONFIG_PCI_IOV, pci_sriov_configure_simple() cannot be
called directly:
drivers/misc/mrvl_cn10k_dpi.c: In function 'dpi_remove':
include/linux/stddef.h:9:14: error: called object is not a function or function pointer
9 | #define NULL ((void *)0)
| ^
include/linux/pci.h:2416:41: note: in expansion of macro 'NULL'
2416 | #define pci_sriov_configure_simple NULL
| ^~~~
drivers/misc/mrvl_cn10k_dpi.c:652:9: note: in expansion of macro 'pci_sriov_configure_simple'
652 | pci_sriov_configure_simple(pdev, 0);
Add this to the Kconfig file as well.
Fixes: 5f67eef6dff3 ("misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver")
Signed-off-by: Arnd Bergmann <[email protected]>
Tested-by: Vamsi Attunuru <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Upon adding CONFIG_ARCH_THUNDER & CONFIG_COMPILE_TEST dependency,
compilation errors arise on 32-bit ARM with writeq() & readq() calls
which are used for accessing 64-bit values.
Since DPI hardware only works with 64-bit register accesses, using
CONFIG_64BIT dependency to skip compilation on 32-bit systems.
Fixes: a5e43e2d202d ("misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI")
Signed-off-by: Vamsi Attunuru <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Tested-by: Jeff Johnson <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
DPI hardware is an on-chip PCIe device on Marvell's arm64 SoC
platforms. As Arnd suggested, CN10K belongs to ARCH_THUNDER
lineage.
Patch makes mrvl_cn10k_dpi driver dependent on CONFIG_ARCH_THUNDER.
Signed-off-by: Vamsi Attunuru <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Adds a misc driver for Marvell CN10K DPI(DMA Engine) device's physical
function which initializes DPI DMA hardware's global configuration and
enables hardware mailbox channels between physical function (PF) and
it's virtual functions (VF). VF device drivers (User space drivers) use
this hw mailbox to communicate any required device configuration on it's
respective VF device. Accordingly, this DPI PF driver provisions the
VF device resources.
At the hardware level, the DPI physical function (PF) acts as a management
interface to setup the VF device resources, VF devices are only provisioned
to handle or control the actual DMA Engine's data transfer capabilities.
Signed-off-by: Vamsi Attunuru <[email protected]>
Reviewed-by: Srujana Challa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The KEBA CP500 system FPGA is a PCIe device, which consists of multiple
IP cores. Every IP core has its own auxiliary driver. The cp500 driver
registers an auxiliary device for each device and the corresponding
drivers are loaded by the Linux driver infrastructure.
Currently 3 variants of this device exists. Every variant has its own
PCI device ID, which is used to determine the list of available IP
cores. In this first version only the auxiliary device for the I2C
controller is registered.
Besides the auxiliary device registration some other basic functions of
the FPGA are implemented; e.g, FPGA version sysfs file, keep FPGA
configuration on reset sysfs file, error message for errors on the
internal AXI bus of the FPGA.
Signed-off-by: Gerhard Engleder <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The ntsync code is only partially enabled in the kernel at this point in
time, creating the device node and that's about it. Don't confuse
systems that expect to see a working ntsync interface by teasing it with
this basic structure at this point in time, so mark the code as "broken"
so that it is not built and enabled just yet.
Once the rest of the code is accepted, this will be reverted so that the
driver can be correctly built and used, but for now, this is the safest
way forward.
Reviewed-by: Elizabeth Figura <[email protected]>
Link: https://lore.kernel.org/r/2024051450-abrasion-swizzle-550b@gregkh
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Remove 'default n' attribute of 'LATTICE_ECP3_CONFIG' option
because it is redundant. 'n' is automatic default value when
one is not specified.
Suggested-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Prasad Pandit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Fix indentation of SGI_GRU option's help text by adding
leading spaces. Generally help text is indented by two
more spaces beyond the leading tab <\t> character.
It helps Kconfig parsers to read file without error.
Signed-off-by: Prasad Pandit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
ntsync uses a misc device as the simplest and least intrusive uAPI interface.
Each file description on the device represents an isolated NT instance, intended
to correspond to a single NT virtual machine.
Signed-off-by: Elizabeth Figura <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Commit b9873755a6c8 ("misc: Add Nitro Secure Module driver") adds Nitro
Security Module support, which selects the non-existing config CBOR.
In the development of the commit, there was initially some code for CBOR
independent of the driver, and the driver included this code with the line
'select CBOR'. This code for CBOR was later reduced to its bare minimum of
functionality and included into the driver itself. The select CBOR remained
unnoticed and was left behind without having any further purpose.
Remove selecting the non-existing config CBOR.
Signed-off-by: Lukas Bulwahn <[email protected]>
Reviewed-by: Alexander Graf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When running Linux inside a Nitro Enclave, the hypervisor provides a
special virtio device called "Nitro Security Module" (NSM). This device
has 3 main functions:
1) Provide attestation reports
2) Modify PCR state
3) Provide entropy
This patch adds a driver for NSM that exposes a /dev/nsm device node which
user space can issue an ioctl on this device with raw NSM CBOR formatted
commands to request attestation documents, influence PCR states, read
entropy and enumerate status of the device. In addition, the driver
implements a hwrng backend.
Originally-by: Petre Eftime <[email protected]>
Signed-off-by: Alexander Graf <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The Itanium architecture is obsolete, and an informal survey [0] reveals
that any residual use of Itanium hardware in production is mostly HP-UX
or OpenVMS based. The use of Linux on Itanium appears to be limited to
enthusiasts that occasionally boot a fresh Linux kernel to see whether
things are still working as intended, and perhaps to churn out some
distro packages that are rarely used in practice.
None of the original companies behind Itanium still produce or support
any hardware or software for the architecture, and it is listed as
'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers
that contributed on behalf of those companies (nor anyone else, for that
matter) have been willing to support or maintain the architecture
upstream or even be responsible for applying the odd fix. The Intel
firmware team removed all IA-64 support from the Tianocore/EDK2
reference implementation of EFI in 2018. (Itanium is the original
architecture for which EFI was developed, and the way Linux supports it
deviates significantly from other architectures.) Some distros, such as
Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have
dropped support years ago.
While the argument is being made [1] that there is a 'for the common
good' angle to being able to build and run existing projects such as the
Grid Community Toolkit [2] on Itanium for interoperability testing, the
fact remains that none of those projects are known to be deployed on
Linux/ia64, and very few people actually have access to such a system in
the first place. Even if there were ways imaginable in which Linux/ia64
could be put to good use today, what matters is whether anyone is
actually doing that, and this does not appear to be the case.
There are no emulators widely available, and so boot testing Itanium is
generally infeasible for ordinary contributors. GCC still supports IA-64
but its compile farm [3] no longer has any IA-64 machines. GLIBC would
like to get rid of IA-64 [4] too because it would permit some overdue
code cleanups. In summary, the benefits to the ecosystem of having IA-64
be part of it are mostly theoretical, whereas the maintenance overhead
of keeping it supported is real.
So let's rip off the band aid, and remove the IA-64 arch code entirely.
This follows the timeline proposed by the Debian/ia64 maintainer [5],
which removes support in a controlled manner, leaving IA-64 in a known
good state in the most recent LTS release. Other projects will follow
once the kernel support is removed.
[0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/
[1] https://lore.kernel.org/all/[email protected]/
[2] https://gridcf.org/gct-docs/latest/index.html
[3] https://cfarm.tetaneutral.net/machines/list/
[4] https://lore.kernel.org/all/[email protected]/
[5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/
Acked-by: Tony Luck <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
On s390 systems (aka mainframes), it has classic channel devices for
networking and permanent storage that are currently even more common
than PCI devices. Hence it could have a fully functional s390 kernel
with CONFIG_PCI=n, then the relevant iomem mapping functions
[including ioremap(), devm_ioremap(), etc.] are not available.
Here let OPEN_DICE depend on HAS_IOMEM so that it won't be built
to cause below compiling error if PCI is unset:
------
ERROR: modpost: "devm_memremap" [drivers/misc/open-dice.ko] undefined!
ERROR: modpost: "devm_memunmap" [drivers/misc/open-dice.ko] undefined!
------
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Baoquan He <[email protected]>
Cc: Derek Kiernan <[email protected]>
Cc: Dragan Cvetic <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This PFSM controls the operational modes of the PMIC:
- STANDBY and LP_STANDBY,
- ACTIVE state,
- MCU_ONLY state,
- RETENTION state, with or without DDR and/or GPIO retention.
Depending on the current operational mode, some voltage domains
remain energized while others can be off.
This PFSM is also used to trigger a firmware update, and provides
R/W access to device registers.
See Documentation/misc-devices/tps6594-pfsm.rst for more
information.
Signed-off-by: Julien Panis <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch adds support for TPS6594 ESM (Error Signal Monitor).
This device monitors the SoC error output signal at its nERR_SOC input pin.
In error condition, ESM toggles its nRSTOUT_SOC pin to reset the SoC.
Signed-off-by: Julien Panis <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver changes for char/misc drivers and
other smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem
seems under very active development recently. This required also
merging in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the
shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
scripts/tags.sh: fix incompatibility with PCRE2
firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
mei: lower the log level for non-fatal failed messages
mei: bus: disallow driver match while dismantling device
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
nvmem: stm32: fix OPTEE dependency
dt-bindings: nvmem: qfprom: add IPQ8074 compatible
nvmem: qcom-spmi-sdam: register at device init time
nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
nvmem: stm32: detect bsec pta presence for STM32MP15x
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
nvmem: core: add nvmem_add_one_cell()
nvmem: core: drop the removal of the cells in nvmem_add_cells()
nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
nvmem: core: add an index parameter to the cell
of: property: add #nvmem-cell-cells property
of: property: make #.*-cells optional for simple props
of: base: add of_parse_phandle_with_optional_args()
net: add helper eth_addr_add()
...
|
|
Now that we have a subsystem for compute accelerators, move the
habanalabs driver to it.
This patch only moves the files and fixes the Makefiles. Future
patches will change the existing code to register to the accel
subsystem and expose the accel device char files instead of the
habanalabs device char files.
Update the MAINTAINERS file to reflect this change.
Signed-off-by: Oded Gabbay <[email protected]>
|
|
The Triple Modular Redundancy(TMR) provides functional fault injection by
changing selected MicroBlaze instructions, which provides the possibility
to verify that the TMR subsystem error detection and fault recovery logic
is working properly.
Usage:
echo 1 > /sys/kernel/debug/xtmr_inject/inject_fault/inject_fault
Signed-off-by: Appana Durga Kedareswara rao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Triple Modular Redundancy(TMR) subsystem contains three microblaze cores,
subsystem is fault-tolerant and continues to operate nominally after
encountering an error. Together with the capability to detect and recover
from errors, the implementation ensures the reliability of the entire
subsystem. TMR Manager is responsible for performing recovery of the
subsystem detects the fault via a break signal it invokes microblaze
software break handler which calls the tmr manager driver api to
update the error count and status, added support for fault detection
feature via sysfs interface.
Usage:
To know the break handler count(Error count):
cat /sys/devices/platform/amba_pl/44a10000.tmr_manager/errcnt
Signed-off-by: Appana Durga Kedareswara rao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add driver support for accessing various information reported by
Ampere's SMpro co-processor such as Boot Progress and other
miscellaneous data.
Signed-off-by: Quan Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add Ampere's SMpro error monitor driver for monitoring and reporting
RAS-related errors as reported by SMpro co-processor found on Ampere's
Altra processor family.
Signed-off-by: Quan Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
the multi-function endpoint of pci1xxxx device.
pci1xxxx is a PCIe switch with a multi-function endpoint on one of its
downstream ports. PIO function is one of the functions in the
multi-function endpoint. PIO function combines a GPIO controller and also
an interface to program pci1xxxx's OTP & EEPROM. This auxiliary bus driver
is loaded for the PIO function and separate child devices are enumerated
for GPIO controller and OTP/EEPROM interface.
Signed-off-by: Kumaravel Thiagarajan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This driver creates per-cpu hrtimers which are required to do the
periodic 'pet' operation. On a conventional watchdog-core driver, the
userspace is responsible for delivering the 'pet' events by writing to
the particular /dev/watchdogN node. In this case we require a strong
thread affinity to be able to account for lost time on a per vCPU.
This part of the driver is the 'frontend' which is reponsible for
delivering the periodic 'pet' events, configuring the virtual peripheral
and listening for cpu hotplug events. The other part of the driver is
an emulated MMIO device which is part of the KVM virtual machine
monitor and this part accounts for lost time by looking at the
/proc/{}/task/{}/stat entries.
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Will Deacon <[email protected]>
Signed-off-by: Sebastian Ene <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch adds support to secure memory allocations for DSP.
It repurposes the reserved field in struct fastrpc_invoke_args
to add attributes to invoke request, for example to setup a secure memory
map for dsp. Secure memory is assigned to DSP Virtual Machine IDs using
Qualcomm SCM calls.
Signed-off-by: Vamsi Krishna Gattupalli <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Open Profile for DICE is an open protocol for measured boot compatible
with the Trusted Computing Group's Device Identifier Composition
Engine (DICE) specification. The generated Compound Device Identifier
(CDI) certificates represent the hardware/software combination measured
by DICE, and can be used for remote attestation and sealing.
Add a driver that exposes reserved memory regions populated by firmware
with DICE CDIs and exposes them to userspace via a character device.
Userspace obtains the memory region's size from read() and calls mmap()
to create a mapping of the memory region in its address space. The
mapping is not allowed to be write+shared, giving userspace a guarantee
that the data were not overwritten by another process.
Userspace can also call write(), which triggers a wipe of the DICE data
by the driver. Because both the kernel and userspace mappings use
write-combine semantics, all clients observe the memory as zeroed after
the syscall has returned.
Cc: Andrew Scull <[email protected]>
Cc: Will Deacon <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: David Brazdil <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
MFD_CORE depends on HAS_IOMEM so anything that selects MFD_CORE should
also depend on HAS_IOMEM since 'select' does not check any dependencies
of the symbol that is being selected.
Prevents this kconfig warning:
WARNING: unmet direct dependencies detected for MFD_CORE
Depends on [n]: HAS_IOMEM [=n]
Selected by [m]:
- HI6421V600_IRQ [=m] && OF [=y] && SPMI [=m]
Fixes: bb3b6552a5b0 ("staging: hikey9xx: split hi6421v600 irq into a separate driver")
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull IIO and staging driver updates from Greg KH:
"Here is the big set of staging and IIO driver updates for 5.15-rc1.
Also included in here are the counter driver subsystem updates as the
IIO drivers needed them.
Lots of churn in some staging drivers, we dropped the "old" rtl8188eu
driver and replaced it with a newer version of the driver that had
been maintained out-of-tree by Larry with the end goal of actually
being able to get this driver out of staging eventually. Despite that
driver being "newer" the line count of this pull request is going up.
Some drivers moved out of staging as well, which is always nice to
see, that is why there are additions to the mfc and misc driver
subsystems. All of these were acked by the various subsystem
maintainers involved.
But by far, as normal, it's coding style cleanups all over the
drivers/staging/ tree in here.
Full details of these changes are in the shortlog.
All of these have been in linux-next for a while with no reported
problems"
[ Note: the r8188eu merge clashed with commit 89939e890605 ("staging:
rtlwifi: use siocdevprivate") from the networking tree. When resolving
the issue, I noted that the whole r8188eu rtw_android code is dead
since commit ae7471cae00a ("staging: r8188eu: remove rtw_ioctl
function").
End result: the merge resolution was to throw all of that away,
rather than do the mindless fixup to code that isn't actually
reachable - Linus ]
* tag 'staging-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (551 commits)
staging: vt6655: Remove filenames in files
staging: r8188eu: add extra TODO entries
staging: vt6656: Remove filenames in files
staging: wlan-ng: fix invalid assignment warning
staging: r8188eu: rename fields of struct rtl_ps
staging: r8188eu: remove ODM_DynamicPrimaryCCA_DupRTS()
staging: r8188eu: rename fields of struct dyn_primary_cca
staging: r8188eu: rename struct field Wifi_Error_Status
staging: r8188eu: Provide a TODO file for this driver
staging: r8188eu: remove unneeded variable
staging: r8188eu: remove unneeded conversions to bool
staging: r8188eu: remove {read,write}_macreg
staging: r8188eu: core: remove condition with no effect
staging: r8188eu: remove ethernet.h header file
staging: r8188eu: remove ip.h header file
staging: r8188eu: remove if_ether.h header file
staging: r8188eu: make rtw_deinit_intf_priv return void
staging: r8188eu: use is_multicast_ether_addr in os_dep/recv_linux.c
staging: r8188eu: use is_multicast_ether_addr in hal/rtl8188eu_xmit.c
staging: r8188eu: use is_multicast_ether_addr in core/rtw_xmit.c
...
|
|
General Electric Healthcare's PPD has a secondary processor from
NXP's Kinetis K20 series. That device has two SPI chip selects:
The main interface's behaviour depends on the loaded firmware
and is currently unused.
The secondary interface can be used to update the firmware using
EzPort protocol. This is implemented by this driver using the
kernel's firmware API. The firmware is being flashed into
non-volatile flash memory, so it is enough to flash it once
and not on every boot. Flashing will wear the flash memory
(it has a life time of at least 10k programming cycles). At
the same time only occasional FW updates are expected (like e.g.
a BIOS update). Thus the firmware update is triggered via sysfs
instead of doing it in the driver's probe routine like many
other drivers.
Signed-off-by: Sebastian Reichel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Per MFD subsystem requirements, split the IRQ part of the
driver into a separate one with just the IRQ handling code
and the powerkey support.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/709e01c9ffafe6cd0ecb23336b44f9bcde2b5bc2.1626515862.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add Synopsys DesignWare xData IP driver. This driver enables/disables
the PCI traffic generator module pertain to the Synopsys DesignWare
prototype.
Signed-off-by: Gustavo Pimentel <[email protected]>
Link: https://lore.kernel.org/r/daa1efe23850e77d6807dc3f371728fc0b7548b8.1617016509.git.gustavo.pimentel@synopsys.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Split-up generic and platform dependent code in order to be able to re-use
generic event handling code in pvpanic PCI device driver in the next patches.
The code from pvpanic.c was split in two new files:
- pvpanic.c: generic code that handles pvpanic events
- pvpanic-mmio.c: platform/bus dependent code
Signed-off-by: Mihai Carabas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Cc: Alexander Shishkin <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Alexander Shishkin <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add initial version of Broadcom VK driver to enumerate PCI device IDs
of Valkyrie and Viper device IDs.
VK based cards provide real-time high performance, high throughput,
low latency offload compute engine operations.
They are used for multiple parallel offload tasks as:
audio, video and image processing and crypto operations.
Further commits add additional features to driver beyond probe/remove.
Acked-by: Olof Johansson <[email protected]>
Signed-off-by: Scott Branden <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There is no driver depending on atmel_tclib anymore. Remove this driver.
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch removes the MIC drivers from the kernel tree
since the corresponding devices have been discontinued.
Removing the dma and char-misc changes in one patch and
merging via the char-misc tree is best to avoid any
potential build breakage.
Cc: Nikhil Rao <[email protected]>
Reviewed-by: Ashutosh Dixit <[email protected]>
Signed-off-by: Sudeep Dutt <[email protected]>
Acked-By: Vinod Koul <[email protected]>
Reviewed-by: Sherry Sun <[email protected]>
Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The dependency should be just USB_ROLE_SWITCH, instead
of CONFIG_USB_ROLE_SWITCH.
Fixes: 2827d98bc5d6 ("misc: Kconfig: add a new dependency for HISI_HIKEY_USB")
Reported-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/0b6dff854c4bb412c2c11f17803e84d61385415f.1602138248.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
As warned by Randy:
on x86_64:
CONFIG_USB_ROLE_SWITCH=m
and HISI_HIKEY_USB=y.
ld: drivers/misc/hisi_hikey_usb.o: in function `hisi_hikey_usb_remove':
hisi_hikey_usb.c:(.text+0x61): undefined reference to `usb_role_switch_unregister'
ld: hisi_hikey_usb.c:(.text+0xa4): undefined reference to `usb_role_switch_put'
ld: drivers/misc/hisi_hikey_usb.o: in function `hub_usb_role_switch_set':
hisi_hikey_usb.c:(.text+0xd3): undefined reference to `usb_role_switch_get_drvdata'
ld: drivers/misc/hisi_hikey_usb.o: in function `relay_set_role_switch':
hisi_hikey_usb.c:(.text+0x54d): undefined reference to `usb_role_switch_set_role'
ld: drivers/misc/hisi_hikey_usb.o: in function `hisi_hikey_usb_probe':
hisi_hikey_usb.c:(.text+0x8a5): undefined reference to `usb_role_switch_get'
ld: hisi_hikey_usb.c:(.text+0xa08): undefined reference to `usb_role_switch_register'
ld: hisi_hikey_usb.c:(.text+0xa6e): undefined reference to `usb_role_switch_put'
Make it dependent on CONFIG_USB_ROLE_SWITCH.
Reported-by: Randy Dunlap <[email protected]>
Acked-by: Randy Dunlap <[email protected]> # build-tested
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/0e49432d0db9ee8429a9923a1d995935b6b83552.1602047370.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The HiKey 970 board is similar to Hikey 960 with regards
to its USB configutation: it also relies on a USB HUB
that is used when DWC3 is at host mode.
However, it requires a few extra DT settings, as it
uses a voltage regulator and GPIO reset pin.
Add support for them.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/62843df9927b4d8dac5dc7c4a189567fa52ab2bb.1599717402.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The HiKey960 has a fairly complex USB configuration due to it
needing to support a USB-C port for host/device mode and multiple
USB-A ports in host mode, all using a single USB controller.
See schematics here:
https://github.com/96boards/documentation/raw/master/consumer/hikey/hikey960/hardware-docs/HiKey960_Schematics.pdf
This driver acts as a usb-role-switch intermediary, intercepting
the role switch notifications from the tcpm code, and passing
them on to the dwc3 core.
In doing so, it also controls the onboard hub and power gpios in
order to properly route the data lines between the USB-C port
and the onboard hub to the USB-A ports.
Signed-off-by: Yu Chen <[email protected]>
[jstultz: Major rework to make the driver a usb-role-switch
intermediary]
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/c263f72e1d803c18c45a69ce2c333e79a7ed89ff.1599717402.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits)
habanalabs: remove unused but set variable 'ctx_asid'
nvmem: qcom-spmi-sdam: Enable multiple devices
dt-bindings: nvmem: SID: add binding for A100's SID controller
nvmem: update Kconfig description
nvmem: qfprom: Add fuse blowing support
dt-bindings: nvmem: Add properties needed for blowing fuses
dt-bindings: nvmem: qfprom: Convert to yaml
nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances
nvmem: core: add support to auto devid
nvmem: core: Add nvmem_cell_read_u8()
nvmem: core: Grammar fixes for help text
nvmem: sc27xx: add sc2730 efuse support
nvmem: Enforce nvmem stride in the sysfs interface
MAINTAINERS: Add git tree for NVMEM FRAMEWORK
nvmem: sprd: Fix return value of sprd_efuse_probe()
drivers: android: Fix the SPDX comment style
drivers: android: Fix a variable declaration coding style issue
drivers: android: Remove braces for a single statement if-else block
drivers: android: Remove the use of else after return
drivers: android: Fix a variable declaration coding style issue
...
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
- use title markups;
- mark literal blocks.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/1b1f4e5e57fd2065828cecc9d07afbd247349e94.1592203650.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
The only thing that vexpress-syscfg does is provide a regmap to
vexpress-config bus child devices. There's little reason to have 2
components for this. The current structure with initcall ordering
requirements makes turning these components into modules more difficult.
So let's start to simplify things and merge vexpress-syscfg into
vexpress-config. There's no functional change in this commit and it's
still separate components until subsequent commits.
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Liviu Dudau <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
|
|
Uacce (Unified/User-space-access-intended Accelerator Framework) targets to
provide Shared Virtual Addressing (SVA) between accelerators and processes.
So accelerator can access any data structure of the main cpu.
This differs from the data sharing between cpu and io device, which share
only data content rather than address.
Since unified address, hardware and user space of process can share the
same virtual address in the communication.
Uacce create a chrdev for every registration, the queue is allocated to
the process when the chrdev is opened. Then the process can access the
hardware resource by interact with the queue file. By mmap the queue
file space to user space, the process can directly put requests to the
hardware without syscall to the kernel space.
The IOMMU core only tracks mm<->device bonds at the moment, because it
only needs to handle IOTLB invalidation and PASID table entries. However
uacce needs a finer granularity since multiple queues from the same
device can be bound to an mm. When the mm exits, all bound queues must
be stopped so that the IOMMU can safely clear the PASID table entry and
reallocate the PASID.
An intermediate struct uacce_mm links uacce devices and queues.
Note that an mm may be bound to multiple devices but an uacce_mm
structure only ever belongs to a single device, because we don't need
anything more complex (if multiple devices are bound to one mm, then
we'll create one uacce_mm for each bond).
uacce_device --+-- uacce_mm --+-- uacce_queue
| '-- uacce_queue
|
'-- uacce_mm --+-- uacce_queue
+-- uacce_queue
'-- uacce_queue
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Kenneth Lee <[email protected]>
Signed-off-by: Zaibo Xu <[email protected]>
Signed-off-by: Zhou Wang <[email protected]>
Signed-off-by: Jean-Philippe Brucker <[email protected]>
Signed-off-by: Zhangfei Gao <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Now that instances of input_dev support polling mode natively,
we no longer need to create input_polled_dev instance.
Signed-off-by: Dmitry Torokhov <[email protected]>
Link: https://lore.kernel.org/r/20191002215658.GA134561@dtor-ws
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver pull request for 5.4-rc1.
As has been happening in previous releases, more and more individual
driver subsystem trees are ending up in here. Now if that is good or
bad I can't tell, but hopefully it makes your life easier as it's more
of an aggregation of trees together to one merge point for you.
Anyway, lots of stuff in here:
- habanalabs driver updates
- thunderbolt driver updates
- misc driver updates
- coresight and intel_th hwtracing driver updates
- fpga driver updates
- extcon driver updates
- some dma driver updates
- char driver updates
- android binder driver updates
- nvmem driver updates
- phy driver updates
- parport driver fixes
- pcmcia driver fix
- uio driver updates
- w1 driver updates
- configfs fixes
- other assorted driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
habanalabs: correctly cast variable to __le32
habanalabs: show correct id in error print
habanalabs: stop using the acronym KMD
habanalabs: display card name as sensors header
habanalabs: add uapi to retrieve aggregate H/W events
habanalabs: add uapi to retrieve device utilization
habanalabs: Make the Coresight timestamp perpetual
habanalabs: explicitly set the queue-id enumerated numbers
habanalabs: print to kernel log when reset is finished
habanalabs: replace __le32_to_cpu with le32_to_cpu
habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
habanalabs: Handle HW_IP_INFO if device disabled or in reset
habanalabs: Expose devices after initialization is done
habanalabs: improve security in Debug IOCTL
habanalabs: use default structure for user input in Debug IOCTL
habanalabs: Add descriptive name to PSOC app status register
habanalabs: Add descriptive names to PSOC scratch-pad registers
habanalabs: create two char devices per ASIC
habanalabs: change device_setup_cdev() to be more generic
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull ia64 updates from Tony Luck:
"The big change here is removal of support for SGI Altix"
* tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: (33 commits)
genirq: remove the is_affinity_mask_valid hook
ia64: remove CONFIG_SWIOTLB ifdefs
ia64: remove support for machvecs
ia64: move the screen_info setup to common code
ia64: move the ROOT_DEV setup to common code
ia64: rework iommu probing
ia64: remove the unused sn_coherency_id symbol
ia64: remove the SGI UV simulator support
ia64: remove the zx1 swiotlb machvec
ia64: remove CONFIG_ACPI ifdefs
ia64: remove CONFIG_PCI ifdefs
ia64: remove the hpsim platform
ia64: remove now unused machvec indirections
ia64: remove support for the SGI SN2 platform
drivers: remove the SGI SN2 IOC4 base support
drivers: remove the SGI SN2 IOC3 base support
qla2xxx: remove SGI SN2 support
qla1280: remove SGI SN2 support
misc/sgi-xp: remove SGI SN2 support
char/mspec: remove SGI SN2 support
...
|