aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/i2c/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2024-06-24media: i2c: Add GC05A2 image sensor driverZhi Mao1-0/+1
Add a V4L2 sub-device driver for Galaxycore GC05A2 image sensor. Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Signed-off-by: Zhi Mao <[email protected]> [Sakari Ailus: Fold in MAINTAINERS change.] Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2024-06-24media: i2c: Add GC08A3 image sensor driverZhi Mao1-0/+1
Add a V4L2 sub-device driver for Galaxycore GC08A3 image sensor. Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Signed-off-by: Zhi Mao <[email protected]> [Sakari Ailus: Fold in MAINTAINERS change.] Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2024-06-15media: i2c: vgxy61: Fix device nameBenjamin Mugnier1-1/+1
Rename 'st-vgxy61' to 'vgxy61', dropping the vendor prefix to follow the same naming scheme as the vast majority of device drivers. The device tree binding does not fall into binding rename exceptions and therefore must not be changed. Keep its legacy name. Signed-off-by: Benjamin Mugnier <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2024-06-04media: i2c: add MAX96714 driverJulien Massot1-0/+1
This driver handles the MAX96714 deserializer in tunnel mode. The CSI output will replicate all the CSI traffic forwarded by the remote serializer. The MAX96714 driver can handle MAX96714 and MAX96714F variants with the same "maxim,max96714f" compatible. Signed-off-by: Julien Massot <[email protected]> [Sakari Ailus: Adapt to changed i2c_mux_add_adapter arguments.] Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2024-06-04media: i2c: add MAX96717 driverJulien Massot1-0/+1
This driver handles the MAX96717 serializer in tunnel mode. All incoming CSI traffic will be tunneled through the GMSL2 link. The MAX96717 driver can handle MAX96717 and MAX96717F variants with the same "maxim,max96717f" compatible. Signed-off-by: Julien Massot <[email protected]> [Sakari Ailus: Adapt to changed i2c_mux_add_adapter arguments.] Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2024-06-04media: i2c: Add imx283 camera sensor driverKieran Bingham1-0/+1
Add a v4l2 subdevice driver for the Sony IMX283 image sensor. The IMX283 is a 20MP Diagonal 15.86 mm (Type 1) CMOS Image Sensor with Square Pixel for Color Cameras. The following features are supported: - Manual exposure an gain control support - vblank/hblank/link freq control support - Test pattern support control - Arbitrary horizontal and vertical cropping - Supported resolution: - 5472x3648 @ 20fps (SRGGB12) - 5472x3648 @ 25fps (SRGGB10) - 2736x1824 @ 50fps (SRGGB12) Signed-off-by: Kieran Bingham <[email protected]> Signed-off-by: Umang Jain <[email protected]> [Sakari Ailus: Take upstream runtime PM API changes into account.] Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2023-12-13media: i2c: Add driver for OmniVision OV64A40Jacopo Mondi1-0/+1
Add a driver for the OmniVision OV64A40 image sensor. Co-developed-by: Lee Jackson <[email protected]> Signed-off-by: Lee Jackson <[email protected]> Signed-off-by: Jacopo Mondi <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2023-12-13media: i2c: gc0308: new driverSebastian Reichel1-0/+1
Introduce new driver for GalaxyCore GC0308, which is a cheap 640x480 with an on-chip ISP sensor sold since 2010. Data is provided via parallel bus. Reviewed-by: Jacopo Mondi <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> [Sakari Ailus: Changed MAINTAINERS to match GC2145 entry.] Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2023-12-13media: i2c: Add support for alvium cameraTommaso Merciai1-0/+1
The Alvium camera is shipped with sensor + isp in the same housing. The camera can be equipped with one out of various sensor and abstract the user from this. Camera is connected via MIPI CSI-2. Most of the camera module features are supported, with the main exception being fw update. The driver provides all mandatory, optional and recommended V4L2 controls for maximum compatibility with libcamera References: - https://www.alliedvision.com/en/products/embedded-vision-solutions Signed-off-by: Tommaso Merciai <[email protected]> [Sakari Ailus: Assign ret before using it in probe and squash Tommaso's other fixes.] Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> [hverkuil: alvium-csi2.h: SPDX must use /* */ instead of //]
2023-12-13media: i2c: Introduce a driver for the Techwell TW9900 decoderMehdi Djait1-0/+1
The Techwell video decoder supports PAL, NTSC standards and has a parallel BT.656 output interface. This commit adds support for this device, with basic support for NTSC and PAL, along with brightness and contrast controls. The TW9900 is capable of automatic standard detection. This driver is implemented with support for PAL and NTSC autodetection. Reviewed-by: Paul Kocialkowski <[email protected]> Signed-off-by: Mehdi Djait <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2023-12-04media: i2c: Add driver for THine THP7312Paul Elder1-0/+1
The THP7312 is an external camera ISP from THine. Add a V4L2 subdev driver for it. Signed-off-by: Paul Elder <[email protected]> Co-developed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> [Sakari Ailus: squash a patch to fix missing mutex_unlock by Laurent.] Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2023-12-04media: i2c: gc2145: Galaxy Core GC2145 sensor supportAlain Volmat1-0/+1
Addition of support for the Galaxy Core GC2145 XVGA sensor. The sensor supports both DVP and CSI-2 interfaces however for the time being only CSI-2 is implemented. Configurations are currently based on initialization scripts coming from Galaxy Core and so for that purpose only 3 static resolutions are supported: - 640x480 - 1280x720 - 1600x1200 Signed-off-by: Alain Volmat <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2023-10-07media: i2c: Add driver for onsemi MT9M114 camera sensorLaurent Pinchart1-0/+1
The MT9M114 is a CMOS camera sensor that combines a 1296x976 pixel array with a 10-bit dynamic range together with an internal ISP. The driver exposes two subdevs, one for the pixel array and one for the ISP (named IFP for Image Flow Processor). Major supported features are - Full configuration of analog crop and binning in the pixel array - Full configuration of scaling in the ISP - Automatic exposure and white balance - Manual exposure and analog gain - Horizontal and vertical flip Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Jacopo Mondi <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2023-08-10media: i2c: Add driver for DW9719 VCMDaniel Scally1-0/+1
Add a driver for the DW9719 VCM. The driver creates a v4l2 subdevice and registers a control to set the desired focus. Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Daniel Scally <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: i2c: add DS90UB953 driverTomi Valkeinen1-0/+1
Add driver for TI DS90UB953 FPD-Link III Serializer. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: i2c: add DS90UB913 driverTomi Valkeinen1-0/+1
Add driver for TI DS90UB913 FPD-Link III Serializer. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: i2c: add DS90UB960 driverTomi Valkeinen1-0/+1
Add driver for TI DS90UB960 FPD-Link III Deserializer. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-05-25media: i2c: add ov01a10 image sensor driverBingbu Cao1-0/+1
Add v4l2 device driver for OmniVision ov01a10 image sensor, ov01a10 image sensor can deliver 1280x800 resolution BGGR10 images at 60 fps. Signed-off-by: Yating Wang <[email protected]> Signed-off-by: Bingbu Cao <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2023-04-15media: i2c: Drop unused vs6624 camera sensor driverLaurent Pinchart1-1/+0
The vs6624 camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v4.17. The driver hasn't been used since them. Drop it. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-04-15media: i2c: Drop unused sr030pc30 camera sensor driverLaurent Pinchart1-1/+0
The sr030pc30 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v2.6.37. Drop it. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-04-15media: i2c: Drop unused s5k6aa camera sensor driverLaurent Pinchart1-1/+0
The s5k6aa camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.11. The driver hasn't been used since them. Drop it. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-04-15media: i2c: Drop unused noon010pc30 camera sensor driverLaurent Pinchart1-1/+0
The noon010pc30 camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.16. A device tree file referencing the device has been added in v3.17, but without corresponding DT bindings, and with DT support in the driver. The driver thus hasn't been used since v316. Drop it. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-04-15media: i2c: Drop unused mt9t001 camera sensor driverLaurent Pinchart1-1/+0
The mt9t001 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.2. Drop it. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-04-15media: i2c: Drop unused mt9m032 camera sensor driverLaurent Pinchart1-1/+0
The mt9m032 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.4. Drop it. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-04-15media: i2c: Drop unused m5mols camera sensor driverLaurent Pinchart1-1/+0
The m5mols camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.11. The driver hasn't been used since them. Drop it. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-04-15media: i2c: Drop unused ad9389b video encoder driverLaurent Pinchart1-1/+0
The ad9389b video encoder driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.7. Drop it. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Hans Verkuil <[email protected]> Acked-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-02-06media: i2c: add imx415 cmos image sensor driverGerald Loacker1-0/+1
Add driver for the Sony IMX415 CMOS image sensor. Signed-off-by: Gerald Loacker <[email protected]> Co-developed-by: Michael Riesch <[email protected]> Signed-off-by: Michael Riesch <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-02-06media: i2c: IMX296 camera sensor driverLaurent Pinchart1-0/+1
The IMX296LLR is a monochrome 1.60MP CMOS sensor from Sony. The driver supports cropping and binning (but not both at the same time due to hardware limitations) and exposure, gain, vertical blanking and test pattern controls. Preliminary support is also included for the color IMX296LQR sensor. [Sakari Ailus: Make driver's remove function return void] Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-02-06media: i2c: Add driver for OmniVision OV8858Nicholas Roth1-0/+1
Add a driver for OmniVision OV8858 image sensor. The driver currently supports operations with 2 and 4 data lanes, in full resolution and half-binned resolution modes. The driver has been upported from the PinephonePro BSP available at https://gitlab.com/pine64-org/linux.git at commit 8c4a90c12dc2 ("media: i2c: ov8858: Use default subdev name"). Signed-off-by: Nicholas Roth <[email protected]> Signed-off-by: Jacopo Mondi <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2022-12-07media: s5k4ecgx: Delete driverLinus Walleij1-1/+0
This driver was until the previous patch unused in the kernel and depended on platform data that no board was defining. As no users can be proven to exist, delete the driver. Cc: Sylwester Nawrocki <[email protected]> Cc: Andrzej Hajda <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Alim Akhtar <[email protected]> Cc: Dmitry Torokhov <[email protected]> Suggested-by: Dmitry Torokhov <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Dmitry Torokhov <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>
2022-10-27media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driverMarco Felsch1-0/+1
Adding support for the TC358746 parallel <-> MIPI CSI bridge. This chip supports two operating modes: 1st) parallel-in -> mipi-csi out 2nd) mipi-csi in -> parallel out This patch only adds the support for the 1st mode. Signed-off-by: Marco Felsch <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> [Sakari Ailus: remove() now returns void] Signed-off-by: Sakari Ailus <[email protected]>
2022-10-27media: i2c: Add driver for ST VGXY61 camera sensorBenjamin Mugnier1-0/+1
The VGXY61 has a quad lanes CSI-2 output port running at 800mbps per lane, and supports RAW8, RAW10, RAW12, RAW14 and RAW16 formats. The driver handles both sensor types: - VG5661 and VG6661: 1.6 Mpx (1464 x 1104) 75fps. - VG5761 and VG6761: 2.3 Mpx (1944 x 1204) 60 fps. The driver supports: - HDR linearize mode, HDR substraction mode, and no HDR - GPIOs LEDs strobing - Digital binning and analog subsampling - Horizontal and vertical flip - Manual exposure - Analog and digital gains - Test patterns Signed-off-by: Benjamin Mugnier <[email protected]> [Sakari Ailus: remove() now returns void] Signed-off-by: Sakari Ailus <[email protected]>
2022-10-25media: i2c: add support for OV4689Mikhail Rudenko1-0/+1
Add a V4L2 sub-device driver for OmniVision OV4689 image sensor. This is a 4 Mpx image sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog gain control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 2688x1520 at 30 fps The driver provides all mandatory V4L2 controls for compatibility with libcamera. The sensor supports 1/2/4-lane CSI-2 modes, but the driver implements 4 lane mode only at this moment. Signed-off-by: Mikhail Rudenko <[email protected]> Signed-off-by: Sakari Ailus <[email protected]>
2022-10-25media: i2c: Add ov08x40 image sensor driverShawn Tu1-0/+1
Add a V4L2 sub-device driver for Omnivision ov08X40 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 3856x2464 at 30FPS + 1928x1208 at 30FPS Signed-off-by: Jason Chen <[email protected]> Signed-off-by: Shawn Tu <[email protected]> Signed-off-by: Sakari Ailus <[email protected]>
2022-07-08media: On Semi AR0521 sensor driverKrzysztof Hałasa1-0/+1
The driver has been extensively tested in an i.MX6-based system. AR0521 is a 5.7 mm x 4.3 mm, 5 MPix RGGB MIPI/HiSPi BSI CMOS sensor from On Semiconductor. Signed-off-by: Krzysztof Hałasa <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2022-03-14media: Makefiles: sort entries where it fitsMauro Carvalho Chehab1-92/+92
Alphabetically sort entries at the Makefiles per group, in ASCII order, e. g., using the output of: $ LC_ALL=C sort Makefile |grep obj-y ... $ LC_ALL=C sort Makefile |grep obj.*CONFIG ... Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2022-03-12media: Makefiles: remove extra spacesMauro Carvalho Chehab1-46/+46
It is hard to keep all those options aligned as newer config changes get added, and we really don't want to have patches adding new options also touching already existing entries. So, drop the extra spaces. Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2022-03-04media: i2c: isl7998x: Add driver for Intersil ISL7998xMarek Vasut1-0/+1
Add driver for the Intersil ISL7998x Analog to MIPI CSI-2/BT656 decoder. This chip supports 1/2/4 analog video inputs and converts them into 1/2/4 VCs in MIPI CSI2 stream. This driver currently supports ISL79987 and both 720x480 and 720x576 resolutions, however as per specification, all inputs must use the same resolution and standard. The only supported pixel format is now YUYV/YUV422. The chip should support RGB565 on the CSI2 as well, but this is currently unsupported. Signed-off-by: Marek Vasut <[email protected]> Cc: Sakari Ailus <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Cc: Rob Herring <[email protected]> To: [email protected] Signed-off-by: Michael Tretter <[email protected]> Acked-by: Hans Verkuil <[email protected]> [Sakari Ailus: Always call pm_runtime_get_and_resume in pre_streamon] Signed-off-by: Sakari Ailus <[email protected]>
2022-03-04media: Add a driver for the og01a1b camera sensorShawn Tu1-0/+1
Add a V4L2 sub-device driver for Omnivision og01a1b b&w image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 1280x1024 at 120FPS Signed-off-by: Shawn Tu <[email protected]> [Sakari Ailus: Update according to recent v4l2-async API changes] Signed-off-by: Sakari Ailus <[email protected]>
2022-01-28media: i2c: Add ov08d10 camera sensor driverJimmy Su1-0/+1
Add a v4l2 sub-device driver for the OmniVision ov08d10 image sensor. This camera sensor is using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - supported resolution: - 3280x2460 at 30 FPS - 3264x2448 at 30 FPS - 1632x1224 at 30 FPS - supported bayer order output: - SGRBG10 as default - SBGGR10 at flip mode - SRGGB10 at mirror mode - SGBRG10 at flip + mirror mode Signed-off-by: Jimmy Su <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2022-01-28media: hi847: Add support for Hi-847 sensorShawn Tu1-0/+1
Add a V4L2 sub-device driver for Hynix Hi-847 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - vflip/hflip control support - keep SGRBG10 Bayer order output - support following resolutions: + 3264x2448 at 30FPS + 1632x1224 at 60FPS [Sakari Ailus: Wrapped a few long lines.] Signed-off-by: Shawn Tu <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2021-11-30media: i2c: Add support for ov5693 sensorDaniel Scally1-0/+1
The OV5693 is a 5 Mpx CMOS image sensor, connected via MIPI CSI-2. The chip is capable of a single lane configuration, but currently only two lanes are supported. Most of the sensor's features are supported, with the main exception being the lens correction algorithm. The driver provides all mandatory, optional and recommended V4L2 controls for maximum compatibility with libcamera. [mchehab: fixed a coding style warning] Signed-off-by: Daniel Scally <[email protected]> Tested-by: Jean-Michel Hautbois <[email protected]> Reviewed-by: Jean-Michel Hautbois <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2021-10-08media: i2c: add driver for the SK Hynix Hi-846 8M pixel cameraMartin Kepplinger1-0/+1
The SK Hynix Hi-846 is a 1/4" 8M Pixel CMOS Image Sensor. It supports usual features like I2C control, CSI-2 for frame data, digital/analog gain control or test patterns. This driver supports the 640x480, 1280x720 and 1632x1224 resolution modes. It supports runtime PM in order not to draw any unnecessary power. The part is also called YACG4D0C9SHC and a datasheet can be found at https://product.skhynix.com/products/cis/cis.go The large sets of partly undocumented register values are for example found when searching for the hi846_mipi_raw_Sensor.c Android driver. Signed-off-by: Martin Kepplinger <[email protected]> Reviewed-by: Pavel Machek <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2021-09-30media: Add sensor driver support for the ov13b10 camera.Arec Kao1-0/+1
This driver supports following features: - phase detection auto focus (PDAF) - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - 4208x3120 at 30FPS - 2080x1170 at 60FPS Signed-off-by: Arec Kao <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2021-08-04media: i2c: Add ov9282 camera sensor driverMartina Krasteva1-0/+1
Add a v4l2 sub-device driver for the OmniVisison ov9282 black&white image sensor. The camera sensor uses the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog gain control support - vblank/hblank/pixel rate/link freq control support - supported resolution: - 1280x720 @ 30fps [Sakari Ailus: Rebase on commit c802a4174beeb25cb539c806c9d0d3c0f61dfa53.] Signed-off-by: Martina Krasteva <[email protected]> Acked-by: Daniele Alessandrelli <[email protected]> Acked-by: Paul J. Murphy <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2021-08-04media: i2c: Add imx412 camera sensor driverMartina Krasteva1-1/+1
Add a v4l2 sub-device driver for the Sony imx412 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog gain control support - vblank/hblank/pixel rate/link freq control support - supported resolution: - 4056x3040 @ 30fps - supported bayer order output: - SRGGB10 [Sakari Ailus: Rebase on commit c802a4174beeb25cb539c806c9d0d3c0f61dfa53.] Signed-off-by: Martina Krasteva <[email protected]> Acked-by: Daniele Alessandrelli <[email protected]> Acked-by: Paul J. Murphy <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2021-08-04media: i2c: Add imx335 camera sensor driverMartina Krasteva1-0/+1
Add a v4l2 sub-device driver for the Sony imx335 image sensor. ThE camera sensor uses the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog gain control support - vblank/hblank/pixel rate/link freq control support - supported resolution: - 2592x1940 @ 30fps - supported bayer order output: - SRGGB12 [Sakari Ailus: Rebase on commit c802a4174beeb25cb539c806c9d0d3c0f61dfa53.] Signed-off-by: Martina Krasteva <[email protected]> Acked-by: Daniele Alessandrelli <[email protected]> Acked-by: Paul J. Murphy <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2021-06-02media: imx208: Add imx208 camera sensor driverShawn Tu1-0/+1
Add a V4L2 sub-device driver for the Sony IMX208 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. [Sakari Ailus: Rename sensor async register function to make it compile, use exposure_max and wrap a few long lines.] Signed-off-by: Ping-Chung Chen <[email protected]> Signed-off-by: Yeh, Andy <[email protected]> Signed-off-by: Shawn Tu <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2021-02-09media: i2c: Kconfig: Make MAX9271 a moduleJacopo Mondi1-4/+3
With the introduction of the RDACM21 camera module support in commit a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module") the symbols defined by the max9271 library were exported twice if multiple users of the library were compiled in at the same time. In example: WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_set_serial_link' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko Fix this by making the max9271 file a module and have the driver using its functions select it. Fixes: a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module") Reported-by: Stephen Rothwell <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Sakari Ailus <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Suggested-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Jacopo Mondi <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2021-02-06media: i2c: Add imx334 camera sensor driverMartina Krasteva1-0/+1
Add a v4l2 sub-device driver for the Sony imx334 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog gain control support - vblank/hblank/pixel rate/link freq control support - supported resolution: - 3840x2160 @ 60fps - supported bayer order output: - SRGGB12 Signed-off-by: Martina Krasteva <[email protected]> Reviewed-by: Gjorgji Rosikopulos <[email protected]> Acked-by: Daniele Alessandrelli <[email protected]> Acked-by: Paul J. Murphy <[email protected]> Reviewed-by: Jacopo Mondi <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.