| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
Reset the data_vio properly for each discard block, and delay
acknowledgement and cleanup until all discard blocks are complete.
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
To ensure code clarity and prevent potential errors, it's advisable
to employ the ';' as a statement separator, except when ',' are
intentionally used for specific purposes.
Signed-off-by: Shen Lichuan <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Ensure the recovery journal does not attempt recovery when blocks
with mismatched metadata versions are detected. This check is
performed after determining that the blocks are otherwise valid
so that it does not interfere with normal recovery.
Signed-off-by: Susan LeGendre-McGhee <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Abort the load process with status code VDO_UNSUPPORTED_VERSION
without forcing read-only mode when a journal block with the
old format version is detected.
Forcing the VDO volume into read-only mode and thus requiring
a read-only rebuild should only be done when absolutely necessary.
Signed-off-by: Susan LeGendre-McGhee <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Add a new dmsetup message called config, which will return
useful configuration information for the vdo volume and
the uds index associated with it. The output is a YAML
string, and contains a version number to allow future
additions to the content.
Signed-off-by: Bruce Johnston <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Remove this check to prevent spurious warning messages due to
the behavior of other storage layers. This check was intended
to make sure dm-vdo does not chain metadata bios together.
However, vdo has no control over underlying storage layers,
so the assertion is not always true.
Signed-off-by: Ken Raeburn <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Clear the dedupe_context pointer in a data_vio whenever ownership of
the context is lost, so that vdo can't examine it accidentally.
Signed-off-by: Ken Raeburn <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- In the series "treewide: Refactor heap related implementation",
Kuan-Wei Chiu has significantly reworked the min_heap library code
and has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally
more rational.
- Kuan-Wei Chiu has sent along some maintenance work against our
sorting library code in the series "lib/sort: Optimizations and
cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix
GDB command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
* tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits)
ia64: scrub ia64 from poison.h
watchdog/perf: properly initialize the turbo mode timestamp and rearm counter
tsacct: replace strncpy() with strscpy()
lib/bch.c: use swap() to improve code
test_bpf: convert comma to semicolon
init/modpost: conditionally check section mismatch to __meminit*
init: remove unused __MEMINIT* macros
nilfs2: Constify struct kobj_type
nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro
math: rational: add missing MODULE_DESCRIPTION() macro
lib/zlib: add missing MODULE_DESCRIPTION() macro
fs: ufs: add MODULE_DESCRIPTION()
lib/rbtree.c: fix the example typo
ocfs2: add bounds checking to ocfs2_check_dir_entry()
fs: add kernel-doc comments to ocfs2_prepare_orphan_dir()
coredump: simplify zap_process()
selftests/fpu: add missing MODULE_DESCRIPTION() macro
compiler.h: simplify data_race() macro
build-id: require program headers to be right after ELF header
resource: add missing MODULE_DESCRIPTION()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- Optimize processing of flush bios in the dm-linear and dm-stripe
targets
- Dm-io cleansups and refactoring
- Remove unused 'struct thunk' in dm-cache
- Handle minor device numbers > 255 in dm-init
- Dm-verity refactoring & enabling platform keyring
- Fix warning in dm-raid
- Improve dm-crypt performance - split bios to smaller pieces, so that
They could be processed concurrently
- Stop using blk_limits_io_{min,opt}
- Dm-vdo cleanup and refactoring
- Remove max_write_zeroes_granularity and max_secure_erase_granularity
- Dm-multipath cleanup & refactoring
- Add dm-crypt and dm-integrity support for non-power-of-2 sector size
- Fix reshape in dm-raid
- Make dm_block_validator const
* tag 'for-6.11/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (33 commits)
dm vdo: fix a minor formatting issue in vdo.rst
dm vdo int-map: fix kerneldoc formatting
dm vdo repair: add missing kerneldoc fields
dm: Constify struct dm_block_validator
dm-integrity: introduce the Inline mode
dm: introduce the target flag mempool_needs_integrity
dm raid: fix stripes adding reshape size issues
dm raid: move _get_reshape_sectors() as prerequisite to fixing reshape size issues
dm-crypt: support for per-sector NVMe metadata
dm mpath: don't call dm_get_device in multipath_message
dm: factor out helper function from dm_get_device
dm-verity: fix dm_is_verity_target() when dm-verity is builtin
dm: Remove max_secure_erase_granularity
dm: Remove max_write_zeroes_granularity
dm vdo indexer: use swap() instead of open coding it
dm vdo: remove unused struct 'uds_attribute'
dm: stop using blk_limits_io_{min,opt}
dm-crypt: limit the size of encryption requests
dm verity: add support for signature verification with platform keyring
dm-raid: Fix WARN_ON_ONCE check for sync_thread in raid_resume
...
|
|
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Also remove trivial comment for increment_recovery_point.
Reported-by: Abaci Robot <[email protected]>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9518
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mikulas Patocka:
- Fix broken discard for device mapper VDO target
* tag 'for-6.10/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm vdo: replace max_discard_sectors with max_hw_discard_sectors
|
|
Commit 4f563a64732d ("block: add a max_user_discard_sectors queue
limit") changed block core to set max_discard_sectors to:
min(lim->max_hw_discard_sectors, lim->max_user_discard_sectors)
Commit 825d8bbd2f32 ("dm: always manage discard support in terms
of max_hw_discard_sectors") fixed most dm targetss to deal with
this, by replacing max_discard_sectors with max_hw_discard_sectors.
Unfortunately, dm-vdo did not get fixed at that time.
Fixes: 825d8bbd2f32 ("dm: always manage discard support in terms of max_hw_discard_sectors")
Signed-off-by: Bruce Johnston <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Use existing swap() macro rather than duplicating its implementation.
Reported-by: Abaci Robot <[email protected]>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9173
Signed-off-by: Jiapeng Chong <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
'uds_attribute' is unused since
commit a9da0fb6d8c6 ("dm vdo: remove all sysfs interfaces").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Remove use of the blk_limits_io_{min,opt} and assign the values directly
to the queue_limits structure. For the io_opt this is a completely
mechanical change, for io_min it removes flooring the limit to the
physical and logical block size in the particular caller. But as
blk_validate_limits will do the same later when actually applying the
limits, there still is no change in overall behavior.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
After adding min_heap_sift_up(), the naming convention has been adjusted
to maintain consistency with the min_heap_sift_up(). Consequently,
min_heapify() has been renamed to min_heap_sift_down().
Link: https://lkml.kernel.org/CAP-5=fVcBAxt8Mw72=NCJPRJfjDaJcqk4rjbadgouAEAHz_q1A@mail.gmail.com
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kuan-Wei Chiu <[email protected]>
Reviewed-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Bagas Sanjaya <[email protected]>
Cc: Brian Foster <[email protected]>
Cc: Ching-Chun (Jim) Huang <[email protected]>
Cc: Coly Li <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Matthew Sakai <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Randy Dunlap <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add a third parameter 'args' for the 'less' and 'swp' functions in the
'struct min_heap_callbacks'. This additional parameter allows these
comparison and swap functions to handle extra arguments when necessary.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kuan-Wei Chiu <[email protected]>
Reviewed-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Bagas Sanjaya <[email protected]>
Cc: Brian Foster <[email protected]>
Cc: Ching-Chun (Jim) Huang <[email protected]>
Cc: Coly Li <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Matthew Sakai <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Randy Dunlap <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Implement a type-safe interface for min_heap using strong type pointers
instead of void * in the data field. This change includes adding small
macro wrappers around functions, enabling the use of __minheap_cast and
__minheap_obj_size macros for type casting and obtaining element size.
This implementation removes the necessity of passing element size in
min_heap_callbacks. Additionally, introduce the MIN_HEAP_PREALLOCATED
macro for preallocating some elements.
Link: https://lkml.kernel.org/ioyfizrzq7w7mjrqcadtzsfgpuntowtjdw5pgn4qhvsdp4mqqg@nrlek5vmisbu
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kuan-Wei Chiu <[email protected]>
Reviewed-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Bagas Sanjaya <[email protected]>
Cc: Brian Foster <[email protected]>
Cc: Ching-Chun (Jim) Huang <[email protected]>
Cc: Coly Li <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Matthew Sakai <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Randy Dunlap <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull bdev bd_inode updates from Al Viro:
"Replacement of bdev->bd_inode with sane(r) set of primitives by me and
Yu Kuai"
* tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RIP ->bd_inode
dasd_format(): killing the last remaining user of ->bd_inode
nilfs_attach_log_writer(): use ->bd_mapping->host instead of ->bd_inode
block/bdev.c: use the knowledge of inode/bdev coallocation
gfs2: more obvious initializations of mapping->host
fs/buffer.c: massage the remaining users of ->bd_inode to ->bd_mapping
blk_ioctl_{discard,zeroout}(): we only want ->bd_inode->i_mapping here...
grow_dev_folio(): we only want ->bd_inode->i_mapping there
use ->bd_mapping instead of ->bd_inode->i_mapping
block_device: add a pointer to struct address_space (page cache of bdev)
missing helpers: bdev_unhash(), bdev_drop()
block: move two helpers into bdev.c
block2mtd: prevent direct access of bd_inode
dm-vdo: use bdev_nr_bytes(bdev) instead of i_size_read(bdev->bd_inode)
blkdev_write_iter(): saner way to get inode and bdev
bcachefs: remove dead function bdev_sectors()
ext4: remove block_device_ejected()
erofs_buf: store address_space instead of inode
erofs: switch erofs_bread() to passing offset instead of block number
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
|
|
Pull block updates from Jens Axboe:
- Add a partscan attribute in sysfs, fixing an issue with systemd
relying on an internal interface that went away.
- Attempt #2 at making long running discards interruptible. The
previous attempt went into 6.9, but we ended up mostly reverting it
as it had issues.
- Remove old ida_simple API in bcache
- Support for zoned write plugging, greatly improving the performance
on zoned devices.
- Remove the old throttle low interface, which has been experimental
since 2017 and never made it beyond that and isn't being used.
- Remove page->index debugging checks in brd, as it hasn't caught
anything and prepares us for removing in struct page.
- MD pull request from Song
- Don't schedule block workers on isolated CPUs
* tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux: (84 commits)
blk-throttle: delay initialization until configuration
blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW
block: fix that util can be greater than 100%
block: support to account io_ticks precisely
block: add plug while submitting IO
bcache: fix variable length array abuse in btree_iter
bcache: Remove usage of the deprecated ida_simple_xx() API
md: Revert "md: Fix overflow in is_mddev_idle"
blk-lib: check for kill signal in ioctl BLKDISCARD
block: add a bio_await_chain helper
block: add a blk_alloc_discard_bio helper
block: add a bio_chain_and_submit helper
block: move discard checks into the ioctl handler
block: remove the discard_granularity check in __blkdev_issue_discard
block/ioctl: prefer different overflow check
null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION()
block: fix and simplify blkdevparts= cmdline parsing
block: refine the EOF check in blkdev_iomap_begin
block: add a partscan sysfs attribute for disks
block: add a disk_has_partscan helper
...
|
|
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Nicolas Schier <[email protected]>
|
|
going to be faster, actually - shift is cheaper than dereference...
Signed-off-by: Al Viro <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Matthew Sakai <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Use bio_list_merge_init instead of open coding bio_list_merge and
bio_list_init.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Mike Snitzer <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Also open-code the calls.
Reported-by: Guenter Roeck <[email protected]>
Signed-off-by: Ken Raeburn <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Also remove related log messages.
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Remove obsolete function vdo_perform_once. Instead, initialize
necessary module state when loading the module.
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Remove the unnecessary semicolon at the end of the for statement.
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Chung Chung <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|
|
Rename all uds_log_* to vdo_log_*.
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Chung Chung <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|
|
Also return VDO_SUCCESS from vdo_make_funnel_queue.
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Chung Chung <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|
|
Fixes: b46d79bdb82a ("dm vdo: add deduplication index storage interface")
Reported-by: Harshit Mogalapalli <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Was only used by sysfs code, can be reinstated if/when needed.
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Ken Raeburn <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|
|
Expose control over dm-vdo's log-level in terms of a module param. It
can be read and written via /sys/module/dm_vdo/parameters/log_level.
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Ken Raeburn <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|
|
Also update target major version number.
All info is (or will be) accessible through alternative interfaces
(e.g. "dmsetup message", module params, etc).
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Ken Raeburn <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|
|
Most should be VDO_SUCCESS. But comparing the return from
kstrtouint() with UDS_SUCCESS (happens to be 0) makes no sense.
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|
|
Update indexer uses of ASSERT and ASSERT_LOG_ONLY to
VDO_ASSERT and VDO_ASSERT_LOG_ONLY, respectively. Remove
ASSERT and ASSERT_LOG_ONLY. Also rename uds_assertion_failed
to vdo_assertion_failed.
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|
|
Also rename ASSERT to VDO_ASSERT and ASSERT_LOG_ONLY to
VDO_ASSERT_LOG_ONLY.
But re-introduce ASSERT and ASSERT_LOG_ONLY as a placeholder
for the benefit of dm-vdo/indexer.
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|
|
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|
|
Update all callers to check for VDO_SUCCESS.
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|
|
Update all callers to check for VDO_SUCCESS (most already did).
Also fix whitespace for update_mapping() parameters.
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|
|
VDO_SUCCESS and UDS_SUCCESS were used interchangably, update all
callers of VDO's memory-alloc functions to consistently check for
VDO_SUCCESS.
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|
|
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|
|
Also define VDO_SUCCESS in a more central location, and
rename error block constants for clarity.
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
__vdo_do_allocation shouldn't be used outside of memory-alloc.h, so
add hidden prefix.
Also, tabify the vdo_allocate_extended macro.
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|
|
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
|