| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A set of fixes that target stability of the SM8350 platform.
* icc-sm8350
interconnect: qcom: sm8350: drop DISP nodes
dt-bindings: interconnect: qcom,sm8350: drop DISP nodes
interconnect: qcom: sm8250: Enable sync_state
Link: https://lore.kernel.org/r/[email protected]/
Signed-off-by: Georgi Djakov <[email protected]>
|
|
BIMC and SNOC-MM on downstream feature
qcom,util-fact which translates to ab_coeff, add it.
Signed-off-by: Adam Skladowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Currently we are lacking descriptions of regmaps, bus clocks
and types of busses, provide them.
Signed-off-by: Adam Skladowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
When driver was upstreamed it seems ap_owned nodes were not available,
bring them now.
Signed-off-by: Adam Skladowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add driver for interconnect busses found in MSM8937 based platforms.
The topology consists of four NoCs that are partially controlled by a
RPM processor.
Signed-off-by: Adam Skladowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Enable the generic icc sync_state callback to ensure interconnect votes
are actually taken into account, instead of being forced to the maximum
value.
Fixes: b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
The msm-5.x kernels have additional display RSC and separate display BCM
voter. Since upstream kernel doesn't yet provide display RSC, we end up
duplicating several nodes, which can result in incorrect votes being
cast. Drop *_DISP nodes.
Fixes: d26a56674497 ("interconnect: qcom: Add SM8350 interconnect provider driver")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add driver for interconnect busses found in MSM8976 based platforms.
The topology consists of four NoCs that are partially controlled by a
RPM processor.
Signed-off-by: Adam Skladowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
This series adds QoS support for QNOC type device which can be found on
SC7280 platform. It adds support for programming priority,
priority forward disable and urgency forwarding. This helps in
priortizing the traffic originating from different interconnect masters
at NOC (Network On Chip).
* icc-rpmh-qos
dt-bindings: interconnect: add clock property to enable QOS on SC7280
interconnect: qcom: icc-rpmh: Add QoS configuration support
interconnect: qcom: sc7280: enable QoS configuration
interconnect: qcom: Fix DT backwards compatibility for QoS
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add qos_clks_required flag to skip QoS configuration if clocks property
is not populated in devicetree for providers which require clocks to be
enabled for accessing registers. This is to keep the QoS configuration
backwards compatible with devices that have older DTB.
Reported-by: Bjorn Andersson <[email protected]>
Closes: https://lore.kernel.org/all/ciji6nlxn752ina4tmh6kwvek52nxpnguomqek6plwvwgvoqef@yrtexkpmn5br/
Signed-off-by: Odelu Kukatla <[email protected]>
Tested-by: Bjorn Andersson <[email protected]>
Fixes: fbd908bb8bc0 ("interconnect: qcom: sc7280: enable QoS configuration")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add interconnect driver for MSM8953-based devices.
* icc-msm8953
dt-bindings: interconnect: qcom: Add Qualcomm MSM8953 NoC
interconnect: qcom: Add MSM8953 driver
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
* icc-fixes
interconnect: qcom: qcm2290: Fix mas_snoc_bimc RPM master ID
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add driver for interconnect busses found in MSM8953 based platforms.
The topology consists of four NoCs that are partially controlled by a
RPM processor.
Note that one of NoCs (System NoC) has a counterpart (System NoC MM)
that is modelled as child device to avoid resource conflicts, since it
uses same MMIO space for configuration.
Signed-off-by: Vladimir Lypak <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Barnabás Czémán <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
The value was wrong, resulting in misprogramming of the hardware.
Fix it.
Fixes: 1a14b1ac3935 ("interconnect: qcom: Add QCM2290 driver support")
Reported-by: Stephan Gerhold <[email protected]>
Closes: https://lore.kernel.org/linux-arm-msm/[email protected]/
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Enable QoS configuration for master ports with predefined values
for priority and urgency forawrding.
Signed-off-by: Odelu Kukatla <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add QoS support for QNOC device for configuring priority,
priority forward disable and urgency forwarding. QoS is required
to prioritize the traffic originating from different interconnect
masters at NoC (Network On Chip).
Signed-off-by: Odelu Kukatla <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/interconnect/qcom/interconnect_qcom.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/interconnect/qcom/icc-rpmh.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <[email protected]>
Link: https://lore.kernel.org/r/20240612-md-drivers-interconnect-qcom-v1-1-da0462d6301b@quicinc.com
Signed-off-by: Georgi Djakov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.10
This pull request contains the interconnect changes for the 6.10-rc1 merge
window. It contains some small driver changes listed below:
Driver changes:
- Cleanup sm6115 QoS port numbering.
- Fix incorrect port value in qcm2290 driver.
Signed-off-by: Georgi Djakov <[email protected]>
* tag 'icc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: qcm2290: Fix mas_snoc_bimc QoS port assignment
interconnect: qcom: sm6115: Unspaghettify SNoC QoS port numbering
|
|
The value was wrong, resulting in misprogramming of the hardware.
Fix it.
Fixes: 1a14b1ac3935 ("interconnect: qcom: Add QCM2290 driver support")
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
When I was creating this driver, my bright mind overlooked the existence
of desc->qos_offset and decided to make up for the difference it made by
adding 21 (0x15) to the port index on SNoC and its downstream buses.
Undo this mistake to make the indices actually mean something.
Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-work-linus
Georgi writes:
interconnect fixes for v6.9-rc
Here are fixes for two reported issues. One of them is a fix for
a driver that tries to access a non-existent resource which prints
a warning message during boot. The other one is fixing a race
condition in the core framework where one struct member has been
left unprotected by mutex.
- interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
- interconnect: Don't access req_list while it's being manipulated
Signed-off-by: Georgi Djakov <[email protected]>
* tag 'icc-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: Don't access req_list while it's being manipulated
interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
|
|
Booting the kernel on X1E results in a message like:
[ 2.561524] qnoc-x1e80100 interconnect-0: ACV_PERF could not find RPMh address
And indeed, taking a look at cmd-db, no such BCM exists. Remove it.
Fixes: 9f196772841e ("interconnect: qcom: Add X1E80100 interconnect provider driver")
Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Mike Tipton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.9
This pull request contains the interconnect changes for the 6.9-rc1 merge
window. The highlights are below:
Core changes:
- Constify the of_phandle_args in xlate functions.
Driver changes:
- New interconnect driver for the MSM8909 platform.
- New interconnect driver for the SM7150 platform.
- Clean-up and removal of unused resources in drivers.
- Constify some pointers to structs.
Signed-off-by: Georgi Djakov <[email protected]>
* tag 'icc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: Add SM7150 driver support
dt-bindings: interconnect: Add Qualcomm SM7150 DT bindings
interconnect: constify of_phandle_args in xlate
dt-bindings: interconnect: qcom,rpmh: Fix bouncing @codeaurora address
interconnect: qcom: x1e80100: constify pointer to qcom_icc_bcm
interconnect: qcom: sa8775p: constify pointer to qcom_icc_bcm
interconnect: qcom: sm6115: constify pointer to qcom_icc_node
interconnect: qcom: sm8250: constify pointer to qcom_icc_node
interconnect: qcom: sa8775p: constify pointer to qcom_icc_node
interconnect: qcom: msm8909: constify pointer to qcom_icc_node
interconnect: qcom: x1e80100: Remove bogus per-RSC BCMs and nodes
dt-bindings: interconnect: Remove bogus interconnect nodes
interconnect: qcom: sm8550: Remove bogus per-RSC BCMs and nodes
interconnect: qcom: Add MSM8909 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm MSM8909 DT bindings
|
|
Add dt-bindings and interconnect driver support for the Qualcomm SM7150 SoC.
* icc-sm7150
dt-bindings: interconnect: Add Qualcomm SM7150 DT bindings
interconnect: qcom: Add SM7150 driver support
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add a driver that handles the different NoCs found on SM7150, based on the
downstream dtb.
Signed-off-by: Danila Tikhonov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
* icc-cleanup
interconnect: qcom: sm8550: Remove bogus per-RSC BCMs and nodes
dt-bindings: interconnect: Remove bogus interconnect nodes
interconnect: qcom: x1e80100: Remove bogus per-RSC BCMs and nodes
interconnect: qcom: sa8775p: constify pointer to qcom_icc_node
interconnect: qcom: sm8250: constify pointer to qcom_icc_node
interconnect: qcom: sm6115: constify pointer to qcom_icc_node
interconnect: qcom: sa8775p: constify pointer to qcom_icc_bcm
interconnect: qcom: x1e80100: constify pointer to qcom_icc_bcm
dt-bindings: interconnect: qcom,rpmh: Fix bouncing @codeaurora address
interconnect: constify of_phandle_args in xlate
Signed-off-by: Georgi Djakov <[email protected]>
|
|
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Acked-by: Konrad Dybcio <[email protected]>
Acked-by: Thierry Reding <[email protected]> # Tegra
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Alim Akhtar <[email protected]> # Samsung
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Pointers to struct qcom_icc_bcm are const.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Pointers to struct qcom_icc_bcm are const.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Pointers to struct qcom_icc_node are const.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Pointers to struct qcom_icc_node are const.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Pointers to struct qcom_icc_node are const.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Pointers to struct qcom_icc_node are const.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
The ACV BCM is voted using bitmasks. Add the proper mask for this
target.
Fixes: 9f196772841e ("interconnect: qcom: Add X1E80100 interconnect provider driver")
Signed-off-by: Mike Tipton <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Tested-by: Abel Vesa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
The ACV enable_mask is historically BIT(3), but it's BIT(0) on this
target. Fix it.
Fixes: c062bcab5924 ("interconnect: qcom: introduce RPMh Network-On-Chip Interconnect on SM8650 SoC")
Signed-off-by: Mike Tipton <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
The downstream kernel has infrastructure for passing votes from different
interconnect nodes onto different RPMh RSCs. This neither implemented, not
is going to be implemented upstream (in favor of a different solution
using ICC tags through the same node).
Unfortunately, as it happens, meaningless (in the upstream context) parts
of the vendor driver were copied, ending up causing havoc - since all
"per-RSC" (in quotes because they all point to the main APPS one) BCMs
defined within the driver overwrite the value in RPMh on every
aggregation.
To both avoid keeping bogus code around and possibly introducing
impossible-to-track-down bugs (busses shutting down for no reason), get
rid of the duplicated BCMs and their associated ICC nodes.
Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Rajendra Nayak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
The downstream kernel has infrastructure for passing votes from different
interconnect nodes onto different RPMh RSCs. This neither implemented, not
is going to be implemented upstream (in favor of a different solution
using ICC tags through the same node).
Unfortunately, as it happens, meaningless (in the upstream context) parts
of the vendor driver were copied, ending up causing havoc - since all
"per-RSC" (in quotes because they all point to the main APPS one) BCMs
defined within the driver overwrite the value in RPMh on every
aggregation.
To both avoid keeping bogus code around and possibly introducing
impossible-to-track-down bugs (busses shutting down for no reason), get
rid of the duplicated BCMs and their associated ICC nodes.
Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add driver for interconnect busses found in MSM8909 based platforms.
The topology consists of three NoCs that are partially controlled by
a RPM processor.
In the downstream/vendor kernel from Qualcomm there is an additional
"mm-snoc". However, it actually ends up using the same RPM "snoc_clk"
as the normal "snoc". It looks like this is actually the same NoC
in hardware and the "mm-snoc" was only defined to assign a different
"qcom,util-fact" to increase bandwidth requests by a static margin.
In mainline we can represent this by assigning the equivalent "ab_coeff"
to all the nodes that are part of "mm-snoc" downstream.
Signed-off-by: Adam Skladowski <[email protected]>
[Stephan: Drop separate mm-snoc that exists downstream since it's
actually the same NoC as SNoC in hardware, add qos_offset for BIMC,
add ab_coeff for mm-snoc nodes and BIMC]
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem changes
for 6.8-rc1.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
android: removed duplicate linux/errno
uio: Fix use-after-free in uio_open
drivers: soc: xilinx: add check for platform
firmware: xilinx: Export function to use in other module
scripts/tags.sh: remove find_sources
scripts/tags.sh: use -n to test archinclude
scripts/tags.sh: add local annotation
scripts/tags.sh: use more portable -path instead of -wholename
scripts/tags.sh: Update comment (addition of gtags)
firmware: zynqmp: Convert to platform remove callback returning void
firmware: turris-mox-rwtm: Convert to platform remove callback returning void
firmware: stratix10-svc: Convert to platform remove callback returning void
firmware: stratix10-rsu: Convert to platform remove callback returning void
firmware: raspberrypi: Convert to platform remove callback returning void
firmware: qemu_fw_cfg: Convert to platform remove callback returning void
firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
firmware: imx-dsp: Convert to platform remove callback returning void
firmware: coreboot_table: Convert to platform remove callback returning void
firmware: arm_scpi: Convert to platform remove callback returning void
firmware: arm_scmi: Convert to platform remove callback returning void
...
|
|
To ensure the interconnect votes are actually meaningful and in order to
prevent holding all buses at FMAX, introduce the sync state callback.
Fixes: e6f0d6a30f73 ("interconnect: qcom: Add SM8550 interconnect provider driver")
Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
The CO0 BCM needs to be up at all times, otherwise some hardware (like
the UFS controller) loses its connection to the rest of the SoC,
resulting in a hang of the platform, accompanied by a spectacular
logspam.
Mark it as keepalive to prevent such cases.
Fixes: 9c8c6bac1ae8 ("interconnect: qcom: Add SC8180x providers")
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add DT bindings and a driver for managing NoC providers on SM6115.
* icc-sm6115
dt-bindings: interconnect: Add Qualcomm SM6115 NoC
interconnect: qcom: Add SM6115 interconnect provider driver
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM6115 bwmon instance
interconnect: qcom: sm6115: Fix up includes
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Remove some unnecessary includes and get rid of the abusive of_platform
in favor of the correct headers.
Reported-by: Rob Herring <[email protected]>
Reported-by: Georgi Djakov <[email protected]>
Fixes: 2eab57b131bd ("interconnect: qcom: Add SM6115 interconnect provider driver")
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add a driver for managing NoC providers on SM6115.
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Per the commit message of commit 'dd014803f260 ("interconnect: qcom:
icc-rpm: Add AB/IB calculations coefficients")', the peak rate should be
100/ib_percent. But, in what looks like a typical typo, the numerator
value is discarded in the calculation.
Update the implementation to match the described intention.
Fixes: dd014803f260 ("interconnect: qcom: icc-rpm: Add AB/IB calculations coefficients")
Cc: [email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add the generic icc sync_state callback to ensure interconnect votes
are taken into account, instead of being pegged at maximum values.
Fixes: b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate")
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
* icc-x1e80100
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm SM8650 SoC
interconnect: qcom: introduce RPMh Network-On-Chip Interconnect on SM8650 SoC
dt-bindings: interconnect: qcom-bwmon: document SM8650 BWMONs
This series adds interconnect support for the Qualcomm X1E80100 platform,
aka Snapdragon X Elite.
Our v1 post of the patchsets adding support for Snapdragon X Elite SoC had
the part number sc8380xp which is now updated to the new part number x1e80100
based on the new branding scheme and refers to the exact same SoC.
Release Link: https://www.qualcomm.com/news/releases/2023/10/qualcomm-unleashes-snapdragon-x-elite--the-ai-super-charged-plat
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add driver for the Qualcomm interconnect buses found in X1E80100 based
platforms. The topology consists of several NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Co-developed-by: Abel Vesa <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
Signed-off-by: Rajendra Nayak <[email protected]>
Co-developed-by: Sibi Sankar <[email protected]>
Signed-off-by: Sibi Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
* icc-platform-remove
interconnect: qcom: Make qnoc_remove return void
interconnect: imx8mm: Convert to platform remove callback returning void
interconnect: imx8mn: Convert to platform remove callback returning void
interconnect: imx8mp: Convert to platform remove callback returning void
interconnect: imx8mq: Convert to platform remove callback returning void
interconnect: qcom/msm8974: Convert to platform remove callback returning void
interconnect: qcom/osm-l3: Convert to platform remove callback returning void
interconnect: qcom/smd-rpm: Convert to platform remove callback returning void
interconnect: exynos: Convert to platform remove callback returning void
This series converts all platform drivers below drivers/interconnect to
use .remove_new(). Compared to the traditional .remove() callback
.remove_new() returns no value. This is a good thing because the driver
core doesn't (and cannot) cope for errors during remove. The only effect
of a non-zero return value in .remove() is that the driver core emits a
warning. The device is removed anyhow and an early return from .remove()
usually yields resource leaks and/or use-after-free bugs.
See commit 5c5a7680e67b ("platform: Provide a remove callback that
returns no value") for an extended explanation and the eventual goal.
All drivers converted here already returned zero unconditionally in
.remove(), so they are converted here trivially. The imx drivers could
be slightly simplified, because the remove callback only called a single
function with the same prototype as .remove_new().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add RPMh Network-On-Chip Interconnect support for the SM8650 platform.
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/20231123-topic-sm8650-upstream-interconnect-v2-2-7e050874f59b@linaro.org
Signed-off-by: Georgi Djakov <[email protected]>
|