| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is useful for debug, in case something goes wrong with the GSC. The
info includes the version information and the current value of the HECI1
status registers.
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: John Harrison <[email protected]>
Cc: Alan Previn <[email protected]>
Reviewed-by: Julia Filipchuk <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
A xe_hw_engine_group is a group of hw engines. Two hw engines belong to
the same xe_hw_engine_group if one hw engine cannot make progress while
the other is stuck on a page fault.
Typically, hw engines of the same group share some resources such as EUs,
but this really depends on the hardware configuration of the platforms.
The simple engines partitioning proposed here might be too conservative
but is intended to work for existing platforms. It can be optimized later
if more sets of independent engines are identified.
The hw engine groups are intended to be used in the context of faulting
long-running jobs submissions.
v2: Move to own files, improve error handling (Matt Brost)
v3: Fix build issue reported by CI, improve commit message (Matt Roper)
v4: Fix kernel doc
v5: Add switch case for XE_ENGINE_CLASS_OTHER
Signed-off-by: Francois Dugast <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add skeleton APIs for recording and printing various stats over
debugfs. This currently only added counter types stats which is backed
by atomic_t and wrapped with CONFIG_DRM_XE_STATS so this can be disabled
on production system.
v4: Rebase and other minor fixes (Matt)
v3: s/CONFIG_DRM_XE_STATS/CONFIG_DEBUG_FS(Lucas)
v2: add missing docs
Add boundary checks for stats id and other improvements (Michal)
Fix build when CONFIG_DRM_XE_STATS is disabled(Matt)
Cc: Lucas De Marchi <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: Michal Wajdeczko <[email protected]>
Cc: Sai Gowtham Ch <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Nirmoy Das <[email protected]>
|
|
Use a dummy xe_debugfs_register() if debugfs is not enabled and move all
debugfs-related files under `ifeq ($(CONFIG_DEBUG_FS),y)` in the
Makefile. This is similar to what was done for display in
commit 439987f6f471 ("drm/xe: don't build debugfs files when
CONFIG_DEBUG_FS=n").
This removes the following warning while loading xe with
CONFIG_DEUBG_FS=n:
xe 0000:03:00.0: [drm] Create GT directory failed
Reviewed-by: Nirmoy Das <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Instead of keep adding more dependencies as WAs are needed in different
places of the driver, just add a rule with all the objects so the code
generation happens before anything else.
While at it, group lines related to wa_oob in the Makefile.
v2: Prefix $(obj) when declaring dependency
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
On BMG-G21 we need to disable fbc due to complications around the WA.
v2:
- Try to handle with i915_drv.h and compat layer. (Rodrigo)
v3:
- For simplicity retreat back to the original design for now.
- Drop the extra \ from the Makefile (Jani)
Signed-off-by: Matthew Auld <[email protected]>
Cc: Jonathan Cavitt <[email protected]>
Cc: Matt Roper <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Cc: Vinod Govindapillai <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: [email protected]
Reviewed-by: Jonathan Cavitt <[email protected]>
Acked-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This involves enabling l2 caching of host side memory access to VRAM
through the CPU BAR. The main fallout here is with display since VRAM
writes from CPU can now be cached in GPU l2, and display is never
coherent with caches, so needs various manual flushing. In the case of
fbc we disable it due to complications in getting this to work
correctly (in a later patch).
Signed-off-by: Matthew Auld <[email protected]>
Cc: Jonathan Cavitt <[email protected]>
Cc: Matt Roper <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Cc: Vinod Govindapillai <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In Xe, the perf layer allows capture of HW counter streams. These HW
counters are generally performance related but don't have to be necessarily
so. Also, the name "perf" is a carryover from i915 and is not preferred.
Here we propose the name "observation" for this common layer which allows
capture of different types of these counter streams.
v2: Rename observability layer to observation layer (Lucas/Rodrigo)
v3: Rename sysctl file to "observation_paranoid" (Jose)
Fixes: 52c2e956dceb ("drm/xe/perf/uapi: "Perf" layer to support multiple perf counter stream types")
Fixes: fe8929bdf835 ("drm/xe/perf/uapi: Add perf_stream_paranoid sysctl")
Acked-by: Lucas De Marchi <[email protected]>
Acked-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Acked-by: José Roberto de Souza <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This WA requires us to limit media GT frequency requests to a certain
cap value during driver load. Freq limits are restored after load
completes, so perf will not be affected during normal operations.
During normal driver operation, this WA requires dummy writes to media
offset 0x380D8C after every ~63 GGTT writes. This will ensure completion
of the LMEM writes originating from Gunit.
During driver unload(before FLR), the WA requires that we set requested
frequency to the cap value again.
v3: Do not use WA number in function name. Call WA wrapper from xe_device.
Rename some variables, check for locks in the correct function (Rodrigo).
Ensure reset path is also covered for this WA.
v4: Fix BAT failure
v5: Add a function pointer for ggtt_ops (Michal W)
v6: Fix name collision and use static function (Rodrigo)
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Vinay Belgaumkar <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Need to sync some header include that propagated through
drm-intel-next.
v2: After some changes in drm/drm-next
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Sync to v6.10-rc3.
Signed-off-by: Jani Nikula <[email protected]>
|
|
Add and initialize supported OA data formats for various platforms
(including Xe2). User can request OA data in any supported format.
Bspec: 52198, 60942, 61101
v2: Start 'xe_oa_format_name' enum from 0 (Umesh)
Fix error rewind with OA (Umesh)
v3: Use graphics versions rather than absolute platform names
v4: Add missing kernel doc for struct memebers and enum and other minor
changes (Michal)
Acked-by: Rodrigo Vivi <[email protected]>
Acked-by: José Roberto de Souza <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In Xe, the plan is to support multiple types of perf counter streams (OA is
only one type of these streams). Rather than introduce NxM ioctls for
these (N perf streams with M ioctl's per perf stream), we decide to
multiplex these (N different stream types and the M ops for each of these
stream types) through a single PERF ioctl. This multiplexing is the purpose
of the PERF layer.
In addition to PERF DRM ioctl's, another set of ioctl's on the PERF fd are
defined. These are expected to be common to different PERF stream types and
therefore defined at the PERF layer itself.
v2: Add param_size to 'struct drm_xe_perf_param' (Umesh)
v3: Rename 'enum drm_xe_perf_ops' to
'enum drm_xe_perf_ioctls' (Guy Zadicario)
Add DRM_ prefix to ioctl names to indicate uapi names
v4: Add 'enum drm_xe_perf_op' previously missed out (Guy Zadicario)
v5: Squash the ops and PERF layer patches into a single patch (Umesh)
Remove param_size from struct 'drm_xe_perf_param' (Umesh)
v6: Add DRM_XE_PERF_IOCTL_STATUS
v7: Add DRM_XE_PERF_IOCTL_INFO
v8: Fix Copyright years, fix DRM_XE_PERF_TYPE_MAX, move '#include
"xe_perf.h"' to xe_perf.c, add kernel doc (Michal)
Acked-by: Rodrigo Vivi <[email protected]>
Acked-by: Guy Zadicario <[email protected]>
Acked-by: José Roberto de Souza <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Recheck the link state after a passing link training, with a 2 sec delay
to account for cases where the link goes bad following the link training
and the sink doesn't report this via an HPD IRQ.
The delayed work added here will be also used by a later patch after a
failed link training to try to retrain the link with unchanged link
params before reducing the link params.
v2: Don't flush an uninitialized delayed work (on HDMI-only DDI ports).
v3:
- Move the helpers to a new intel_encoder.c file, rename them
accordingly. (Ville)
- Add the work to intel_encoder instead of intel_digital_port.
- Call the encoder specific link check function via an encoder hook.
- Flush the link check work during encoder destroy from
intel_dp_encoder_flush_work().
- Flush the link check work during encoder suspend as well.
v4: Call intel_encoder_link_check_init() with a valid encoder pointer.
Cc: Ville Syrjälä <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
xe_trace.h is starting to get over crowded. Move the traces
related to guc to its own file.
v2: Update year in License(Gustavo)
Reviewed-by: Gustavo Sousa <[email protected]>
Suggested-by: Jani Nikula <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Signed-off-by: Radhakrishna Sripada <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
xe_trace.h is starting to get over crowded. Move the traces
related to bo, vm, vma's to its own file.
v2: Update year in License(Gustavo)
Reviewed-by: Gustavo Sousa <[email protected]>
Suggested-by: Jani Nikula <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Signed-off-by: Radhakrishna Sripada <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Expose the L3 bank mask (Francois)
Cross-subsystem Changes:
- Update Xe driver maintainers (Oded)
Display (i915):
- Add missing include to intel_vga.c (Michal Wajdeczko)
Driver Changes:
- Fix Display (xe-only) detection for ADL-N (Lucas)
- Runtime PM fixes that enabled PC-10 and D3Cold (Francois, Rodrigo)
- Fix unexpected silent drm backmerge issues (Thomas)
- More (a lot more) preparation for SR-IOV support (Michal Wajdeczko)
- Devcoredump fixes and improvements (Jose, Tejas, Matt Brost)
- Introduce device 'wedged' state (Rodrigo)
- Improve debug and info messages (Michal Wajdeczko, Rodrigo, Nirmoy)
- Adding or fixing workarounds (Tejas, Shekhar, Lucas, Bommu)
- Check result of drmm_mutex_init (Michal Wajdeczko)
- Enlarge the critical dma fence area for preempt fences (Matt Auld)
- Prevent UAF in VM's rebind work (Matt Auld)
- GuC submit related clean-ups and fixes (Matt Brost, Himal, Jonathan, Niranjana)
- Prefer local helpers to perform dma reservation locking (Himal)
- Spelling and typo fixes (Colin, Francois)
- Prep patches for 1 job per VM bind IOCTL (no uapi change yet) (Matt Brost)
- Remove uninitialized end var from xe_gt_tlb_invalidation_range (Nirmoy)
- GSC related changes targeting LNL support (Daniele)
- Fix assert in L3 bank mask generation (Francois)
- Perform dma_map when moving system buffer objects to TT (Thomas)
- Add helpers for manipulating macro arguments (Michal Wajdeczko)
- Refactor default device atomic settings (Nirmoy)
- Add debugfs node to dump mocs (Janga)
- Use ordered WQ for G2H handler (Matt Brost)
- Clean up and fixes in header includes (Michal Wajdeczko)
- Prefer flexible-array over deprecated zero-lenght ones (Lucas)
- Add Indirect Ring State support (Niranjana)
- Fix UBSAN shift-out-of-bounds failure (Shuicheng)
- HWMon fixes and additions (Karthik)
- Clean-up refactor around probe init functions (Lucas, Michal Wajdeczko)
- Fix PCODE init function (Himal)
- Only use reserved BCS instances for usm migrate exec queue (Matt Brost)
- Only zap PTEs as needed (Matt Brost)
- Per client usage info (Lucas)
- Core hotunplug improvements converting stuff towards devm (Matt Auld)
- Don't emit false error if running in execlist mode (Michal Wajdeczko)
- Remove unused struct (Dr. David)
- Support/debug for slow GuC loads (John Harrison)
- Decouple job seqno and lrc seqno (Matt Brost)
- Allow migrate vm gpu submissions from reclaim context (Thomas)
- Rename drm-client running time to run_ticks and fix a UAF (Umesh)
- Check empty pinned BO list with lock held (Nirmoy)
- Drop undesired prefix from the platform name (Michal Wajdeczko)
- Remove unwanted mutex locking on xe file close (Niranjana)
- Replace format-less snprintf() with strscpy() (Arnd)
- Other general clean-ups on registers definitions and function names (Michal Wajdeczko)
- Add kernel-doc to some xe_lrc interfaces (Niranajana)
- Use missing lock in relay_needs_worker (Nirmoy)
- Drop redundant W=1 warnings from Makefile (Jani)
- Simplify if condition in preempt fences code (Thorsten)
- Flush engine buffers before signalling user fence on all engines (Andrzej)
- Don't overmap identity VRAM mapping (Matt Brost)
- Do not dereference NULL job->fence in trace points (Matt Brost)
- Add synchronous gt reset debugfs (Jonathan)
- Xe gt_idle fixes (Riana)
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Since commit a61ddb4393ad ("drm: enable (most) W=1 warnings by default
across the subsystem"), most of the extra warnings in the driver
Makefile are redundant. Remove them.
Note that -Wmissing-declarations and -Wmissing-prototypes are always
enabled by default in scripts/Makefile.extrawarn.
Acked-by: Lucas De Marchi <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/958a67adcbb64d3a387d2a07d83b05d71176e938.1716471145.git.jani.nikula@intel.com
|
|
Move ALPM feature related code as it will be used for
non-psr panel also thorugh LOBF feature.
v1: Initial version.
v2: Correct ordering in makefile. [Jani]
Reviewed-by: Jouni Högander <[email protected]>
Signed-off-by: Animesh Manna <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There is no point in mixing register access and VRAM code in the
same file. Move and rename the VRAM probe function to a new file
(there are no other changes other then new simple kernel-doc).
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Matt Roper <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Other driver code beyond the sysfs interface wants to know about
throttling. So make the query function globally accessible.
v2: Revert include order change (review feedback from Lucas)
v3: Remove '_sysfs' from throttle file names and keep limit query in
the same file rather than moving elsewhere (review feedback from
Rodrigo).
v4: Correct #include while renaming header file (review feedback
from Lucas).
Signed-off-by: John Harrison <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
|
|
For debug purposes we might want to view actual VF configuration
(including GGTT range, LMEM size, number of GuC contexts IDs or
doorbells) and the negotiated ABI versions (with GuC and PF).
Reviewed-by: Piotr Piórkowski <[email protected]>
Signed-off-by: Michal Wajdeczko <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The VF driver doesn't know which GuC firmware was loaded by the PF
driver and must perform GuC ABI version handshake prior to sending
any other H2G actions to the GuC to submit workloads.
The VF driver also doesn't have access to the fuse registers and
must rely on the runtime info, which includes values of the fuse
registers, that the PF driver is exposing to the VFs.
Add functions to cover that functionality. We will use these
functions in upcoming patches.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Piotr Piórkowski <[email protected]>
Reviewed-by: Piotr Piórkowski <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When thresholds used to monitor VFs activities are configured,
then GuC may send GUC2PF_ADVERSE_EVENT messages informing the
PF driver about exceeded thresholds. Start handling such messages.
Reviewed-by: Piotr Piórkowski <[email protected]>
Signed-off-by: Michal Wajdeczko <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The PCI subsystem already exposes the "sriov_numvfs" attribute
that users can use to enable or disable SR-IOV VFs. Add custom
implementation of the .sriov_configure callback defined by the
pci_driver to perform additional steps, including fair VFs
provisioning with the resources, as required by our platforms.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Piotr Piórkowski <[email protected]>
Cc: Badal Nilawar <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Piotr Piórkowski <[email protected]> #v2
Reviewed-by: Badal Nilawar <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Nicolas Schier <[email protected]>
|
|
Perform manual transient cache flush prior to flip and at the end of
frontbuffer_flush. This is needed to ensure display engine doesn't see
garbage if the surface is L3:XD dirty.
Testcase: igt@xe-pat@display-vs-wb-transient
Signed-off-by: Matthew Auld <[email protected]>
Signed-off-by: Balasubramani Vivekanandan <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Signed-off-by: Radhakrishna Sripada <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Avoid falling too far behind drm-next.
Signed-off-by: Thomas Hellström <[email protected]>
|
|
We already have functions to configure VF resources and to print
actual provisioning details. Expose this functionality in debugfs
to allow experiment with different settings or inspect details in
case of unexpected issues with the provisioning.
As debugfs attributes are per-VF, we use parent d_inode->i_private
to store VFID, similarly how we did for per-GT attributes.
Reviewed-by: Piotr Piórkowski <[email protected]>
Signed-off-by: Michal Wajdeczko <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We already have mechanism that allows a VF driver to communicate
with the PF driver, now add PF side handlers for VF2PF requests
defined in version 1.0 of VF/PF GuC Relay ABI specification.
The VF2PF_HANDSHAKE request must be used by the VF driver to
negotiate the ABI version prior to sending any other request.
We will reset any negotiated version later during FLR.
The outcome of the VF2PF_QUERY_RUNTIME requests depends on actual
platform, for legacy platforms used as SDV is provided as-is, for
latest platforms it is preliminary, and might be changed.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Piotr Piórkowski <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Remove unused flags (Francois Dugast)
- Extend uAPI to query HuC micro-controler firmware version (Francois Dugast)
- drm/xe/uapi: Define topology types as indexes rather than masks
(Francois Dugast)
- drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE
(Francois Dugast)
- devcoredump updates. Some touching the output format.
(José Roberto de Souza, Matthew Brost)
- drm/xe/hwmon: Add infra to support card power and energy attributes
- Improve LRC, HWSP and HWCTX error capture. (Maarten Lankhorst)
- drm/xe/uapi: Add IP version and stepping to GT list query (Matt roper)
- Invalidate userptr VMA on page pin fault (Matthew Brost)
- Improve xe_bo_move tracepoint (Priyanka Danamudi)
- Align fence output format in ftrace log
Cross-driver Changes:
- drm/i915/hwmon: Get rid of devm (Ashutosh Dixit)
(Acked-by: Rodrigo Vivi <[email protected]>)
- drm/i915/display: convert inner wakeref get towards get_if_in_use
(SOB Rodrigo Vivi)
- drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakeref
(Committer, SOB Jani Nikula)
Driver Changes:
- Fix for unneeded CCS metadata allocation (Akshata Jahagirdar)
- Fix for fix multicast support for Xe_LP platforms (Andrzej Hajda)
- A couple of build fixes (Arnd Bergmann)
- Fix register definition (Ashutosh Dixit)
- Add BMG mocs table (Balasubramani Vivekanandan)
- Replace sprintf() across driver (Bommu Krishnaiah)
- Add an xe2 workaround (Bommu Krishnaiah)
- Makefile fix (Dafna Hirschfeld)
- force_wake_get error value check (Daniele Ceraolo Spurio)
- Handle GSCCS ER interrupt (Daniele Ceraolo Spurio)
- GSC Workaround (Daniele Ceraolo Spurio)
- Build error fix (Dawei Li)
- drm/xe/gt: Add L3 bank mask to GT topology (Francois Dugast)
- Implement xe2- and GuC workarounds (Gustavo Sousa, Haridhar Kalvala,
Himal rasad Ghimiray, John Harrison, Matt Roper, Radhakrishna Sripada,
Vinay Belgaumkar, Badal Nilawar)
- xe2hpg compression (Himal Ghimiray Prasad)
- Error code cleanups and fixes (Himal Prasad Ghimiray)
- struct xe_device cleanup (Jani Nikula)
- Avoid validating bos when only requesting an exec dma-fence
(José Roberto de Souza)
- Remove debug message from migrate_clear (José Roberto de Souza)
- Nuke EXEC_QUEUE_FLAG_PERSISTENT leftover internal flag (José Roberto de Souza)
- Mark dpt and related vma as uncached (Juha-Pekka Heikkila)
- Hwmon updates (Karthik Poosa)
- KConfig fix when ACPI_WMI selcted (Lu Yao)
- Update intel_uncore_read*() return types (Luca Coelho)
- Mocs updates (Lucas De Marchi, Matt Roper)
- Drop dynamic load-balancing workaround (Lucas De Marchi)
- Fix a PVC workaround (Lucas De Marchi)
- Group live kunit tests into a single module (Lucas De Marchi)
- Various code cleanups (Lucas De Marchi)
- Fix a ggtt init error patch and move ggtt invalidate out of ggtt lock
(Maarten Lankhorst)
- Fix a bo leak (Marten Lankhorst)
- Add LRC parsing for more GPU instructions (Matt Roper)
- Add various definitions for hardware and IP (Matt Roper)
- Define all possible engines in media IP descriptors (Matt Roper)
- Various cleanups, asserts and code fixes (Matthew Auld)
- Various cleanups and code fixes (Matthew Brost)
- Increase VM_BIND number of per-ioctl Ops (Matthew Brost, Paulo Zanoni)
- Don't support execlists in xe_gt_tlb_invalidation layer (Matthew Brost)
- Handle timing out of already signaled jobs gracefully (Matthew Brost)
- Pipeline evict / restore of pinned BOs during suspend / resume (Matthew Brost)
- Do not grab forcewakes when issuing GGTT TLB invalidation via GuC
(Matthew Brost)
- Drop ggtt invalidate from display code (Matthew Brost)
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag (Matthew Brost)
- Add debug messages for MMU notifier and VMA invalidate (Matthew Brost)
- Use ordered wq for preempt fence waiting (Matthew Brost)
- Initial development for SR-IOV support including some refactoring
(Michal Wajdeczko)
- Various GuC- and GT- related cleanups and fixes (Michal Wajdeczko)
- Move userptr over to start using hmm_range_fault (Oak Zeng)
- Add new PCI IDs to DG2 platform (Ravi Kumar Vodapalli)
- Pcode - and VRAM initialization check update (Riana Tauro)
- Large PM update including i915 display patches, and a fix for one of those.
(Rodrigo Vivi)
- Introduce performance tuning changes for Xe2_HPG (Shekhar Chauhan)
- GSC / HDCP updates (Suraj Kandpal)
- Minor code cleanup (Tejas Upadhyay)
- Rework / fix rebind TLB flushing and move rebind into the drm_exec locking loop
(Thomas Hellström)
- Backmerge (Thomas Hellström)
- GuC updates and fixes (Vinay Belgaumkar, Zhanjun Dong)
Signed-off-by: Dave Airlie <[email protected]>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZiestQAKCRC4FpNVCsYG
# v8dLAQCDFUR7R5rwSdfqzNy+Djg+9ZgmtzVEfHZ+rI2lTReaCwEAhWeK7UooIMV0
# vGsSdsqGsJQm4VLRzE6H1yemCCQOBgM=
# =HouD
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Apr 2024 22:42:29 AEST
# gpg: using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF
# gpg: Can't check signature: No public key
# Conflicts:
# drivers/gpu/drm/xe/xe_device_types.h
# drivers/gpu/drm/xe/xe_vm.c
# drivers/gpu/drm/xe/xe_vm_types.h
From: Thomas Hellstrom <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/Zievlb1wvqDg1ovi@fedora
|
|
In order to reduce the DC5->DC2 restore time, wakelocks have been
introduced in DMC so the driver can tell it when registers and other
memory areas are going to be accessed and keep their respective blocks
awake.
Implement this in the driver by adding the concept of DMC wakelocks.
When the driver needs to access memory which lies inside pre-defined
ranges, it will tell DMC to set the wakelock, access the memory, then
wait for a while and clear the wakelock.
The wakelock state is protected in the driver with spinlocks to
prevent concurrency issues.
BSpec: 71583
Signed-off-by: Luca Coelho <[email protected]>
Reviewed-by: Uma Shankar <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
To run correctly, each Virtual Function must be provisioned with
some chunk of shared hardware or firmware resources (like GGTT,
device memory, GuC doorbell IDs, GuC context IDs) and scheduling
parameters (execution quantum or preemption timeout).
All resources assigned to VFs must be excluded from the PF driver
use and may require some additional preparation steps (like setup
of the LMTT or update of the GGTT PTE). Those provisioning details
must be then sent to the GuC firmware as most of those details
will be shared later with the VF drivers during their boot.
Add basic functions to provision VFs with all hardware resources
or scheduling parameters. We will use them shortly in upcoming
patches either in manual provisioning over debugfs, exposed to the
advanced users, or automatic provisioning done by PF driver during
VFs enabling.
Reviewed-by: Piotr Piórkowski <[email protected]>
Signed-off-by: Michal Wajdeczko <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The PF driver must maintain additional GT level data per each VF.
This additional per-VF data will be added in upcoming patches and
will include: provisioning configuration (like GGTT space or LMEM
allocation sizes or scheduling parameters), monitoring thresholds
and counters, and more.
As number of supported VFs varies across platforms use flexible
array where first entry will contain metadata for the PF itself
(if such configuration parameter is applicable for the PF) and
all remaining entries will contain data for potential VFs.
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Signed-off-by: Michal Wajdeczko <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There are few knobs inside GuC firmware to control VFs scheduling.
Add basic functions to support their reconfigurations.
We will start using them shortly once we prepare debugfs.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Piotr Piórkowski <[email protected]>
Reviewed-by: Piotr Piórkowski <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Many of the GuC actions use KLVs to pass additional parameters or
configuration data. Add few helper functions for better reporting
any information related to KLVs.
Cc: Himal Prasad Ghimiray <[email protected]>
Reviewed-by: Piotr Piórkowski <[email protected]>
Acked-by: Himal Prasad Ghimiray <[email protected]>
Signed-off-by: Michal Wajdeczko <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.
Signed-off-by: Thomas Hellström <[email protected]>
|
|
Introduce a helper function xe_userptr_populate_range to populate
a userptr range. This functions calls hmm_range_fault to read
CPU page tables and populate all pfns/pages of this virtual address
range. For system memory page, dma-mapping is performed
to get a dma-address which can be used later for GPU to access pages.
v1: Address review comments:
separate a npage_in_range function (Matt)
reparameterize function xe_userptr_populate_range function (Matt)
move mmu_interval_read_begin() call into while loop (Thomas)
s/mark_range_accessed/xe_mark_range_accessed (Thomas)
use set_page_dirty_lock (vs set_page_dirty) (Thomas)
move a few checking in xe_vma_userptr_pin_pages to hmm.c (Matt)
v2: Remove device private page support. Only support system
pages for now. use dma-map-sg rather than dma-map-page (Matt/Thomas)
v3: Address review comments:
Squash patch "drm/xe: Introduce a helper to free sg table" to current
patch (Matt)
start and end addresses are already page aligned (Matt)
Do mmap_read_lock and mmap_read_unlock for hmm_range_fault incase of
non system allocator call. (Matt)
Drop kthread_use_mm and kthread_unuse_mm. (Matt)
No need of kernel-doc for static functions.(Matt)
Modify function names. (Matt)
Free sgtable incase of dma_map_sgtable failure.(Matt)
Modify loop for hmm_range_fault.(Matt)
v4: Remove the dummy function for xe_hmm_userptr_populate_range
since CONFIG_HMM_MIRROR is needed. (Matt)
Change variable names start/end to userptr_start/userptr_end.(Matt)
v5: Remove device private page support info from commit message. Since
the patch doesn't support device page handling. (Thomas)
Signed-off-by: Oak Zeng <[email protected]>
Co-developed-by: Niranjana Vishwanathapura <[email protected]>
Signed-off-by: Niranjana Vishwanathapura <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Brian Welty <[email protected]>
Signed-off-by: Himal Prasad Ghimiray <[email protected]>
Signed-off-by: Thomas Hellström <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
A recent change added a use of xe_wa_oob.h without adding the file that
uses it to uses_generated_oob, which means xe_wa_oob.h does not get
properly generated before attempting to build the object file:
LINK resolve_btfids
CC [M] drivers/gpu/drm/xe/xe_guc_ads.o
drivers/gpu/drm/xe/xe_guc_ads.c:10:10: fatal error: generated/xe_wa_oob.h: No such file or directory
10 | #include <generated/xe_wa_oob.h>
| ^~~~~~~~~~~~~~~~~~~~~~~
After adding '$(obj)/xe_guc_ads.o' to uses_generated_oob, xe_wa_oob.h is
always generated before building the file, resulting in no errors:
LINK resolve_btfids
HOSTCC drivers/gpu/drm/xe/xe_gen_wa_oob
GEN xe_wa_oob.c xe_wa_oob.h
CC [M] drivers/gpu/drm/xe/xe_guc_ads.o
Fixes: c151ff5c9053 ("drm/xe/lnl: Enable GuC Wa_14019882105")
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410-drm-xe-fix-xe_guc_ads-using-xe_wa_oob-v1-1-441f2d8e5d83@kernel.org
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
SR-IOV PF mode detection is based on PCI capability as reported by
the PCI dev_is_pf() function and additionally on 'max_vfs' module
parameter which could be also used to disable PF capability even
if SR-IOV PF capability is reported by the hardware.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Catching up on 6.9-rc2
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Use localized __diag_push(), __diag_ignore_all() with rationale, and
__diag_pop() for specific initializations instead of blanket disabling
of -Woverride-init across several files.
Note that we've tried this before with commit 88e9664434c9 ("drm/i915:
use localized __diag_ignore_all() instead of per file") and reverted in
commit 290d16104575 ("Revert "drm/i915: use localized
__diag_ignore_all() instead of per file""). The issue turned out to be
in __diag_ignore_all() and it was fixed by commit 689b097a06ba
("compiler-gcc: Suppress -Wmissing-prototypes warning for all supported
GCC"). So we should be able to pull this off now.
Cc: Arnd Bergmann <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.
Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.
There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.
Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.
Fixes: 2cd3271b7a31 ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Hamza Mahfooz <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Acked-by: Andrew Jeffery <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
GuC will use VF_STATE_NOTIFY events to notify the PF about changes
of the VF state, in particular when a VF FLR was requested. Add
very minimal support for such events to avoid reporting errors due
to unexpected G2H. We will improve handling of these messages later.
While around also add few basic functions to control the VF state
(pause, resume, stop) as we will also exercise them soon.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Piotr Piórkowski <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
While we are already managing GuC IDs directly in GuC submission
code, using bitmap() for MLRC and ida() for SLRC, this code can't
be easily extended to meet additional requirements for SR-IOV use
cases, like limited number of IDs available on VFs, or ID range
reservation for provisioning VFs by the PF.
Add a separate component for managing GuC IDs, that will replace
existing ID management. Start with bitmap() based implementation
that could be optimized later based on perf data.
Cc: Matthew Brost <[email protected]>
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Enable HDCP for Xe by defining functions which take care of
interaction of HDCP as a client with the GSC CS interface.
Add intel_hdcp_gsc_message to Makefile and add corresponding
changes to xe_hdcp_gsc.c to make it build.
--v2
-add kfree at appropriate place [Daniele]
-remove useless define [Daniele]
-move host session logic to xe_gsc_submit.c [Daniele]
-call xe_gsc_check_and_update_pending directly in an if condition
[Daniele]
-use xe_device instead of drm_i915_private [Daniele]
--v3
-use xe prefix for newly exposed function [Daniele]
-remove client specific defines from intel_gsc_mtl_header [Daniele]
-add missing kfree() [Daniele]
-have NULL check for hdcp_message in finish function [Daniele]
-dont have too many variable declarations in the same line [Daniele]
--v4
-don't point the hdcp_message structure in xe_device to anything
until it properly gets initialized [Daniele]
--v5
-Squash commits for buildability
--v6
-Order includes alphabetically [Lucas]
Signed-off-by: Suraj Kandpal <[email protected]>
Reviewed-by: Arun R Murthy <[email protected]>
Signed-off-by: Mika Kahola <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Since 'grouped target' is used only in 'make' 4.3, it should
be avoided. Replace it with 'multi-target pattern rule' which
has the same behavior.
Fixes: 9616e74b796c ("drm/xe: Add support for OOB workarounds")
Signed-off-by: Dafna Hirschfeld <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
[ reword commit message ]
Signed-off-by: Lucas De Marchi <[email protected]>
(cherry picked from commit 5224ed586ba7f9bba956655a1bfe5b75df7394d4)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
When the driver is built-in but the tests are in loadable modules,
the helpers don't actually get put into the driver:
ERROR: modpost: "xe_kunit_helper_alloc_xe_device" [drivers/gpu/drm/xe/tests/xe_test.ko] undefined!
Change the Makefile to ensure they are always part of the driver
even when the rest of the kunit tests are in loadable modules.
Fixes: 5095d13d758b ("drm/xe/kunit: Define helper functions to allocate fake xe device")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
(cherry picked from commit 0e6fec6da25167a568fbaeb8401d8172069124ad)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Since 'grouped target' is used only in 'make' 4.3, it should
be avoided. Replace it with 'multi-target pattern rule' which
has the same behavior.
Fixes: 9616e74b796c ("drm/xe: Add support for OOB workarounds")
Signed-off-by: Dafna Hirschfeld <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
[ reword commit message ]
Signed-off-by: Lucas De Marchi <[email protected]>
|