aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/vc4/vc4_plane.c
AgeCommit message (Collapse)AuthorFilesLines
2024-01-11drm/vc4: don't check if plane->state->fb == state->fbMaíra Canal1-4/+1
Currently, when using non-blocking commits, we can see the following kernel warning: [ 110.908514] ------------[ cut here ]------------ [ 110.908529] refcount_t: underflow; use-after-free. [ 110.908620] WARNING: CPU: 0 PID: 1866 at lib/refcount.c:87 refcount_dec_not_one+0xb8/0xc0 [ 110.908664] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash aes_arm64 aes_generic algif_skcipher af_alg bnep hid_logitech_hidpp vc4 brcmfmac hci_uart btbcm brcmutil bluetooth snd_soc_hdmi_codec cfg80211 cec drm_display_helper drm_dma_helper drm_kms_helper snd_soc_core snd_compress snd_pcm_dmaengine fb_sys_fops sysimgblt syscopyarea sysfillrect raspberrypi_hwmon ecdh_generic ecc rfkill libaes i2c_bcm2835 binfmt_misc joydev snd_bcm2835(C) bcm2835_codec(C) bcm2835_isp(C) v4l2_mem2mem videobuf2_dma_contig snd_pcm bcm2835_v4l2(C) raspberrypi_gpiomem bcm2835_mmal_vchiq(C) videobuf2_v4l2 snd_timer videobuf2_vmalloc videobuf2_memops videobuf2_common snd videodev vc_sm_cma(C) mc hid_logitech_dj uio_pdrv_genirq uio i2c_dev drm fuse dm_mod drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 110.909086] CPU: 0 PID: 1866 Comm: kodi.bin Tainted: G C 6.1.66-v8+ #32 [ 110.909104] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 110.909114] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 110.909132] pc : refcount_dec_not_one+0xb8/0xc0 [ 110.909152] lr : refcount_dec_not_one+0xb4/0xc0 [ 110.909170] sp : ffffffc00913b9c0 [ 110.909177] x29: ffffffc00913b9c0 x28: 000000556969bbb0 x27: 000000556990df60 [ 110.909205] x26: 0000000000000002 x25: 0000000000000004 x24: ffffff8004448480 [ 110.909230] x23: ffffff800570b500 x22: ffffff802e03a7bc x21: ffffffecfca68c78 [ 110.909257] x20: ffffff8002b42000 x19: ffffff802e03a600 x18: 0000000000000000 [ 110.909283] x17: 0000000000000011 x16: ffffffffffffffff x15: 0000000000000004 [ 110.909308] x14: 0000000000000fff x13: ffffffed577e47e0 x12: 0000000000000003 [ 110.909333] x11: 0000000000000000 x10: 0000000000000027 x9 : c912d0d083728c00 [ 110.909359] x8 : c912d0d083728c00 x7 : 65646e75203a745f x6 : 746e756f63666572 [ 110.909384] x5 : ffffffed579f62ee x4 : ffffffed579eb01e x3 : 0000000000000000 [ 110.909409] x2 : 0000000000000000 x1 : ffffffc00913b750 x0 : 0000000000000001 [ 110.909434] Call trace: [ 110.909441] refcount_dec_not_one+0xb8/0xc0 [ 110.909461] vc4_bo_dec_usecnt+0x4c/0x1b0 [vc4] [ 110.909903] vc4_cleanup_fb+0x44/0x50 [vc4] [ 110.910315] drm_atomic_helper_cleanup_planes+0x88/0xa4 [drm_kms_helper] [ 110.910669] vc4_atomic_commit_tail+0x390/0x9dc [vc4] [ 110.911079] commit_tail+0xb0/0x164 [drm_kms_helper] [ 110.911397] drm_atomic_helper_commit+0x1d0/0x1f0 [drm_kms_helper] [ 110.911716] drm_atomic_commit+0xb0/0xdc [drm] [ 110.912569] drm_mode_atomic_ioctl+0x348/0x4b8 [drm] [ 110.913330] drm_ioctl_kernel+0xec/0x15c [drm] [ 110.914091] drm_ioctl+0x24c/0x3b0 [drm] [ 110.914850] __arm64_sys_ioctl+0x9c/0xd4 [ 110.914873] invoke_syscall+0x4c/0x114 [ 110.914897] el0_svc_common+0xd0/0x118 [ 110.914917] do_el0_svc+0x38/0xd0 [ 110.914936] el0_svc+0x30/0x8c [ 110.914958] el0t_64_sync_handler+0x84/0xf0 [ 110.914979] el0t_64_sync+0x18c/0x190 [ 110.914996] ---[ end trace 0000000000000000 ]--- This happens because, although `prepare_fb` and `cleanup_fb` are perfectly balanced, we cannot guarantee consistency in the check plane->state->fb == state->fb. This means that sometimes we can increase the refcount in `prepare_fb` and don't decrease it in `cleanup_fb`. The opposite can also be true. In fact, the struct drm_plane .state shouldn't be accessed directly but instead, the `drm_atomic_get_new_plane_state()` helper function should be used. So, we could stick to this check, but using `drm_atomic_get_new_plane_state()`. But actually, this check is not really needed. We can increase and decrease the refcount symmetrically without problems. This is going to make the code more simple and consistent. Signed-off-by: Maíra Canal <mcanal@igalia.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240105175908.242000-1-mcanal@igalia.com
2024-01-02drm/vc4: plane: check drm_gem_plane_helper_prepare_fb() return valueSimon Ser1-1/+4
Bubble up any error to the caller. Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Maxime Ripard <mripard@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231216141518.242811-1-contact@emersion.fr
2023-04-25drm/vc4: Switch to container_of_constMaxime Ripard1-2/+1
container_of_const() allows to preserve the pointer constness and is thus more flexible than inline functions. Let's switch all our instances of container_of() to container_of_const(). Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20221207-rpi-hdmi-improvements-v3-1-bdd54f66884e@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-02-22Merge tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-10/+129
Pull drm updates from Dave Airlie: "There are a bunch of changes all over in the usual places. Highlights: - habanalabs moves from misc to accel - first accel driver for Intel VPU (Versatile Processing Unit) inference engine - dropped all the ancient legacy DRI1 drivers. I think it's been at least 10 years since anyone has heard about these. - Intel DG2 updates and prelim Meteorlake enablement - etnaviv adds support for Versilicon NPU device (a GPU like engine with inference accelerators) Detailed summary: Removals: - remove legacy dri1 drivers: i810, mga, r128, savage, sis, tdfx, via New driver: - intel VPU accelerator driver - habanalabs comes via drm tree now drm/core: - use drm_dbg_ helpers in several places - Document defaults for CRTC backgrounds - Document use of drm_minor edid: - improve mode parsing and refactoring connector: - support analog TV mode property media: - add some common formats udmabuf: - add vmap/vunmap methods fourcc: - add XRGB1555 and RGB565 formats - document open source user waiver firmware: - fix color-format selection for system framebuffer format-helper: - Add conversion from XRGB8888 to various sysfb formats - Make XRGB8888 the only driver-emulated legacy format - Add conversion from XRGB8888 to XBGR8888 and ABGR8888 fb-helper: - fix preferred depth and bpp values across drivers - Avoid blank consoles from selecting an incorrect color format probe-helper: - Enable/disable HPD on connectors scheduler: - Fix lockup in drm_sched_entity_kill() - Deprecate drm_sched_resubmit_jobs() bridge: - remove unused functions - implement i2c probe_new in various drivers - ite-it6505: Locking fixes, Cache EDID data - ite-it66121: Support IT6610 chip - lontium-tl9611: Fix HDMI on DragonBoard 845c - parade-ps8640: Use atomic bridge functions - Support i.MX93 LDB plus DT bindings debugfs: - add per device helpers and convert drivers displayport: - mst fixes - add DP adaptive sync DPCD definitions fbdev: - always pick 32bpp as default - remove some unused code simpledrm: - support system memory framebuffers panel: - add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50 - Use ktime_get_boottime() to measure power-down delay - Fix auto-suspend delay - Visionox VTDR6130 AMOLED DSI - Support Himax HX8394 - Convert many drivers to common generic DSI write-sequence helper - AUO A030JTN01 ttm: - drop bo wait wrapper - fix MIPS build habanalabs: - moved driver to accel subsystem - gaudi2 decoder error improvement - more trace events - Gaudi2 abrupt reset by firmware support - add uAPI to flush memory transactions - add uAPI to pass through userspace reqs to fw - remove dma-buf export by handle amdgpu: - add new INFO queries for peak and min sclk/mclk for profile modes - Add PCIe info to the INFO IOCTL - secure display support for multiple displays - DML optimizations - DCN 3.2 updates - PSR updates - DP 2.1 updates - SR-IOV RAS updates - VCN RAS support - SMU 13.x updates - Switch 1 element arrays to flexible arrays - Add RAS support for DF 4.3 - Stack size improvements - S0ix rework - Allow 0 as a vram limit on APUs - Handle profiling modes for SMU13.x - Fix possible segfault in failure case - Rework FW requests to happen in early_init for all IPs so that we don't lose the sbios console if FW is missing - Fix power reporting on certain firmwares for CZN/RN - Allow S0ix without BIOS support - Enable freesync over PCon - Re-enable the AGP aperture on GMC 11.x amdkfd: - Error handling fixes - PASID fixes - Fix for cleared VRAM BOs - Fix cleanup if GPUVM creation fails - Memory accounting fix - Use resource_size rather than open codeing it - GC11 mGPU fix radeon: - Switch 1 element arrays to flexible arrays - Fix memory leak on shutdown - move to new logging i915: - Meteorlake display/OA/GSC fw/workarounds enabling - DP MST DSC support - Gamma/degamma readout support for the state checker - Enable SDP split support for DP 2.0 - Add probe blocking support to i915.force_probe parameter - Enable Xe HP 4tile support - Avoid display direct calls to uncore - Fix HuC delayed load memory leaks - Add DG2 workarounds Wa_18018764978 and Wa_18019271663 - Improve suspend / resume times with VT-d scanout workaround active - Fix DG2 visual corruption on small BAR systems by not forgetting to copy CCS aux state - Fix TLB invalidation for Gen12.50 video and compute engines - Enable HF-EEODB by switching HDMI, DP and LVDS to use struct drm_edid - Start using unversioned DMC firmware paths for new platforms - ELD refactor: Stop using hardware buffer, precompute ELD - lots of display code refactoring nouveau: - drop legacy ioctl support - replace 0-sized array msm: - dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform - Added bindings for SM8150 - dpu: Partial support for DSC on SM8150 and SM8250 - dpu: Fixed color transformation matrix being lost on suspend/resume - dp: Support SDM845 and SC8280XP platforms - dp: Support for limiting DP link rate via DT property - dsi: Validate display modes according to the DSI OPP table - dsi: DSI PHY support for the SM6375 platform - Add MSM_SUBMIT_BO_NO_IMPLICI - a2xx: Support to load legacy firmware - a6xx: GPU devcore dump updates for a650/a660 - GPU devfreq tuning and fixes - Turn 8960 HDMI PHY into clock provider, - Make 8960 HDMI PHY use PXO clock from DT etnaviv: - experimental versilicon NPU support - report GPU load via fdinfo format - MMU fault message improvements tegra: - rework syncpoint interrupt mediatek: - DSI timing fix - fix config deps ast: - various fixes exynos: - restore bridge chain order fixes gud: - convert to shadow plane buffers - perform flushing synchronously during atomic update - Use new debugfs helpers arm/hdlcd: - Use new debugfs helper ili9486: - Support 16-bit pixel data imx: - Split off IPUv3 driver mipi-dbi: - convert to DRM shadow-plane helpers - rsp driver changes - Support separate I/O-voltage supply mxsfb: - Depend on ARCH_MXS or ARCH_MXC sun4i: - convert to new TV mode property vc4: - convert to new TV mode property - kunit tests - Support RGB565 and RGB666 formats - convert dsi driver to bridge - Various HVS an CRTC fixes v3d: - Do not opencode drm_gem_object_lookup() virtio: - improve tracing vkms: - support small cursors in IGT tests - Fix SEGFAULT from incorrect GEM-buffer mapping rcar-du: - fixes and improvements" * tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm: (1455 commits) msm/fbdev: fix unused variable warning with clang. drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini() dma-buf: make kobj_type structure constant drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt() drm/amd/display: disable SubVP + DRR to prevent underflow drm/amd/display: Fail atomic_check early on normalize_zpos error drm/amd/pm: avoid unaligned access warnings drm/amd/display: avoid unaligned access warnings drm/amd/display: Remove duplicate/repeating expressions drm/amd/display: Remove duplicate/repeating expression drm/amd/display: Make variables declaration inside ifdef guard drm/amd/display: Fix excess arguments on kernel-doc drm/amd/display: Add previously missing includes drm/amd/amdgpu: Add function prototypes to headers drm/amd/display: Add function prototypes to headers drm/amd/display: Turn global functions into static drm/amd/display: remove unused _calculate_degamma_curve function drm/amd/display: remove unused func declaration from resource headers drm/amd/display: unset initial value for tf since it's never used drm/amd/display: camel case cleanup in color_gamma file ...
2023-02-09drm/vc4: Fix YUV plane handling when planes are in different buffersDave Stevenson1-2/+4
YUV images can either be presented as one allocation with offsets for the different planes, or multiple allocations with 0 offsets. The driver only ever calls drm_fb_[dma|cma]_get_gem_obj with plane index 0, therefore any application using the second approach was incorrectly rendered. Correctly determine the address for each plane, removing the assumption that the base address is the same for each. Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230127155708.454704-1-maxime@cerno.tech
2023-01-09drm/vc4: plane: Add 3:3:2 and 4:4:4:4 RGB/RGBX/RGBA formatsDave Stevenson1-0/+70
The hardware supports the 332 8bpp and 4:4:4:4 16bpp formats, but the table of supported formats didn't include them. Add them in. In theory they are supported for T-format as well as linear, but without a way to test them just add them as linear for now. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-11-1f8e0770798b@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-01-09drm/vc4: plane: Omit pixel_order from the hvs_format for hvs5 only formatsDave Stevenson1-5/+0
pixel_order is used for the earlier versions of the HVS, so is redundant on the 10:10:10:2 and 10bit YUV formats that are only supported on HVS5. Remove the assignment from the table to avoid confusion. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-10-1f8e0770798b@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-01-09drm/vc4: plane: Allow using 0 as a pixel order valueDave Stevenson1-6/+14
vc4_plane_mode_set for HVS5 was using pixel_order unless pixel_order_hvs5 was non-zero, except 0 is a valid value for the pixel_order. Specify pixel_order_hvs5 for all formats and remove the conditional. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-9-1f8e0770798b@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-01-09drm/vc4: hvs: Add DRM 210101010 RGB formatsDave Stevenson1-0/+28
HVS5 supports the 210101010 RGB[A|X] formats, but they were missing from the DRM to HVS mapping list, so weren't available. Add them in. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-7-1f8e0770798b@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-01-09drm/vc4: hvs: Fix colour order for xRGB1555 on HVS5Dave Stevenson1-0/+2
Same as the xRGB8888 formats, HVS5 has managed to swap the colour channels for the xRGB1555 formats as well. Add the relevant config for pixel_order_hvs5. Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-6-1f8e0770798b@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-01-09drm/vc4: hvs: Support zpos on all planesDave Stevenson1-3/+19
Adds the zpos property to all planes, and creates the dlist by placing the fragments in the correct order based on zpos. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-5-1f8e0770798b@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-08-25drm/vc4: plane: protect device resources after removalDanilo Krummrich1-0/+20
(Hardware) resources which are bound to the driver and device lifecycle must not be accessed after the device and driver are unbound. However, the DRM device isn't freed as long as the last user closed it, hence userspace can still call into the driver. Therefore protect the critical sections which are accessing those resources with drm_dev_enter() and drm_dev_exit(). Fixes: 9872c7a31921 ("drm/vc4: plane: Switch to drmm_universal_plane_alloc()") Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220824161327.330627-3-dakr@redhat.com
2022-08-03drm/gem: rename struct drm_gem_dma_object.{paddr => dma_addr}Danilo Krummrich1-2/+2
The field paddr of struct drm_gem_dma_object holds a DMA address, which might actually be a physical address. However, depending on the platform, it can also be a bus address or a virtual address managed by an IOMMU. Hence, rename the field to dma_addr, which is more applicable. In order to do this renaming the following coccinelle script was used: ``` @@ struct drm_gem_dma_object *gem; @@ - gem->paddr + gem->dma_addr @@ struct drm_gem_dma_object gem; @@ - gem.paddr + gem.dma_addr @exists@ typedef dma_addr_t; symbol paddr; @@ dma_addr_t paddr; <... - paddr + dma_addr ...> @@ symbol paddr; @@ dma_addr_t - paddr + dma_addr ; ``` This patch is compile-time tested with: ``` make ARCH={x86_64,arm,arm64} allyesconfig make ARCH={x86_64,arm,arm64} drivers/gpu/drm` ``` Acked-by: Sam Ravnborg <sam@ravnborg.org> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-5-dakr@redhat.com
2022-08-03drm/gem: rename GEM CMA helpers to GEM DMA helpersDanilo Krummrich1-2/+2
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-08-03drm/fb: rename FB CMA helpers to FB DMA helpersDanilo Krummrich1-5/+5
Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "FB CMA", but not "GEM CMA". This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com
2022-07-26drm: Remove unnecessary include statements of drm_plane_helper.hThomas Zimmermann1-1/+0
Remove the include statement for drm_plane_helper.h from all the files that don't need it. Althogh the header file is almost empty, many drivers include it somewhere. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-5-tzimmermann@suse.de
2022-07-13drm/vc4: plane: Switch to drmm_universal_plane_alloc()Maxime Ripard1-15/+8
Let's switch to drmm_universal_plane_alloc() for our plane allocation and initialisation to make the driver a bit simpler. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220711173939.1132294-20-maxime@cerno.tech
2022-07-13drm/vc4: plane: Take possible_crtcs as an argumentMaxime Ripard1-8/+7
vc4_plane_init() currently initialises the plane with no possible CRTCs, and will expect the caller to set it up by itself. Let's change that logic a bit to follow the syntax of drm_universal_plane_init() and pass the possible CRTCs bitmask as an argument to the function instead. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220711173939.1132294-18-maxime@cerno.tech
2022-07-13Backmerge tag 'v5.19-rc6' of ↵Dave Airlie1-8/+21
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge in rc6 so I can merge msm next easier. Linux 5.19-rc6 Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-06-28drm/vc4: plane: Add alpha_blend_mode property to each plane.Dave Stevenson1-13/+49
Move from only supporting the default of pre-multiplied alpha to supporting user specified blend mode using the standardised property. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-7-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-06-28drm/vc4: plane: Fix margin calculations for the right/bottom edgesDave Stevenson1-4/+4
The current plane margin calculation code clips the right and bottom edges of the range based using the left and top margins. This is obviously wrong, so let's fix it. Fixes: 666e73587f90 ("drm/vc4: Take margin setup into account when updating planes") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-6-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-06-28drm/vc4: plane: Remove subpixel positioning checkDom Cobley1-13/+9
There is little harm in ignoring fractional coordinates (they just get truncated). Without this: modetest -M vc4 -F tiles,gradient -s 32:1920x1080-60 -P89@74:1920x1080*.1.1@XR24 is rejected. We have the same issue in Kodi when trying to use zoom options on video. Note: even if all coordinates are fully integer. e.g. src:[0,0,1920,1080] dest:[-10,-10,1940,1100] it will still get rejected as drm_atomic_helper_check_plane_state uses drm_rect_clip_scaled which transforms this to fractional src coords Fixes: 21af94cf1a4c ("drm/vc4: Add support for scaling of display planes.") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Link: https://lore.kernel.org/r/20220613144800.326124-5-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-06-20drm: Drop drm_blend.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for drm_blend.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_blend.h. Quite a few placs do currently depend on drm_blend.h without actually including it directly. All of those need to be fixed up. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220613200317.11305-4-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-06-20drm: Drop drm_framebuffer.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for drm_frambuffer.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_framebuffer.h. Quite a few placs do currently depend on drm_framebuffer.h without actually including it directly. All of those need to be fixed up. v2: Fix up msm some more v2: Deal with ingenic and shmobile as well Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-06-16drm/vc4: plane: Register a different drm_plane_helper_funcs on BCM2711Maxime Ripard1-1/+11
On the BCM2711, our current definition of drm_plane_helper_funcs uses the custom vc4_prepare_fb() and vc4_cleanup_fb(). Those functions rely on the buffer allocation path that was relying on the GPU, and is no longer relevant. Let's create another drm_plane_helper_funcs structure that we will register on the BCM2711. Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220610115149.964394-8-maxime@cerno.tech
2022-06-16drm/vc4: Consolidate Hardware Revision CheckMaxime Ripard1-7/+6
A new generation of controller has been introduced with the BCM2711/RaspberryPi4. This generation needs a bunch of quirks, and over time we've piled on a number of checks in most parts of the drivers. All these checks are performed several times, and are not always consistent. Let's create a single, global, variable to hold it and use it everywhere. Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220610115149.964394-3-maxime@cerno.tech
2022-06-16drm/vc4: plane: Prevent async update if we don't have a dlistMaxime Ripard1-0/+4
The vc4 planes are setup in hardware by creating a hardware descriptor in a dedicated RAM. As part of the process to setup a plane in KMS, we thus need to allocate some part of that dedicated RAM to store our descriptor there. The async update path will just reuse the descriptor already allocated for that plane and will modify it directly in RAM to match whatever has been asked for. In order to do that, it will compare the descriptor for the old plane state and the new plane state, will make sure they fit in the same size, and check that only the position or buffer address have changed. Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220610115149.964394-2-maxime@cerno.tech
2022-04-29drm/vc4: simplify the return expression of vc4_prepare_fb()Minghao Chi1-6/+1
Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220429054945.3852039-1-chi.minghao@zte.com.cn
2021-12-16drm/vc4: plane: Add support for YUV color encodings and rangesDave Stevenson1-3/+68
The BT601/BT709 color encoding and limited vs full range properties were not being exposed, defaulting always to BT601 limited range. Expose the parameters and set the registers appropriately. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20211215091739.135042-4-maxime@cerno.tech
2021-12-16drm/vc4: plane: Add support for DRM_FORMAT_P030Dave Stevenson1-31/+96
The P030 format, used with the DRM_FORMAT_MOD_BROADCOM_SAND128 modifier, is a format output by the video decoder on the BCM2711. Add native support to the KMS planes for that format. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20211215091739.135042-3-maxime@cerno.tech
2021-11-04drm/vc4: Leverage the load tracker on the BCM2711Maxime Ripard1-5/+0
The load tracker was initially designed to report and warn about a load too high for the HVS. To do so, it computes for each plane the impact it's going to have on the HVS, and will warn (if it's enabled) if we go over what the hardware can process. While the limits being used are a bit irrelevant to the BCM2711, the algorithm to compute the HVS load will be one component used in order to compute the core clock rate on the BCM2711. Let's remove the hooks to prevent the load tracker to do its computation, but since we don't have the same limits, don't check them against them, and prevent the debugfs file to enable it from being created. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-8-maxime@cerno.tech
2021-04-13Merge drm/drm-fixes into drm-nextDaniel Vetter1-1/+0
msm-next pull request has a baseline with stuff from -fixes, roll forward first. Some simple conflicts in amdgpu, ttm and one in i915 where git gets confused and tries to add the same function twice. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-04-08drm/vc4: plane: Remove redundant assignmentMaxime Ripard1-1/+0
The vc4_plane_atomic_async_update function assigns twice in a row the src_h field in the drm_plane_state structure to the same value. Remove the second one. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161328.1471556-2-maxime@cerno.tech
2021-03-16Merge tag 'drm-misc-next-2021-03-03' of ↵Dave Airlie1-35/+41
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
2021-02-25drm/atomic: Pass the full state to planes atomic disable and updateMaxime Ripard1-1/+1
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes atomic_checkMaxime Ripard1-1/+3
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_check. The conversion was done using the coccinelle script below plus some manual changes for vmwgfx, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_check(plane, plane_state) + FUNCS->atomic_check(plane, state) ...+> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *new_plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
2021-02-24drm: Rename plane atomic_check state namesMaxime Ripard1-5/+5
Most drivers call the argument to the plane atomic_check hook simply state, which is going to conflict with the global atomic state in a later rework. Let's rename it to new_plane_state (or new_state depending on the convention used in the driver). This was done using the coccinelle script below, and built tested: @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { .atomic_check = func, }; @ has_old_state @ identifier plane_atomic_func.func; identifier plane; expression e; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *old_state = e; ... } @ depends on has_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_state ) { <+... - state + new_state ...+> } @ has_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... } @ depends on has_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_plane_state ) { <+... - state + new_plane_state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes async atomic check and updateMaxime Ripard1-27/+31
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_async_check and atomic_async_update. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_async_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_async_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_async_check = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_async_update = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_async_check(plane, plane_state) + FUNCS->atomic_async_check(plane, state) ...+> } @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_async_update(plane, plane_state) + FUNCS->atomic_async_update(plane, state) ...+> } @@ identifier mtk_plane_atomic_async_update; identifier plane; symbol new_state, state; expression e; @@ void mtk_plane_atomic_async_update(struct drm_plane *plane, struct drm_plane_state *new_state) { ... - struct mtk_plane_state *state = e; + struct mtk_plane_state *new_plane_state = e; <+... - state + new_plane_state ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *new_plane_state) { <... - state + new_plane_state ...> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <+... - plane_state->state + state ...+> } Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-1-maxime@cerno.tech
2021-02-23drm/gem: Move drm_gem_fb_prepare_fb() to GEM atomic helpersThomas Zimmermann1-2/+2
The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting, but currently located next to framebuffer helpers. Move it to GEM atomic helpers, rename it slightly and adopt the drivers. Same for the rsp simple-pipe helper. Compile-tested with x86-64, aarch64 and arm. The patch is fairly large, but there are no functional changes. v3: * remove out-comented line in drm_gem_framebuffer_helper.h (Maxime) v2: * rename to drm_gem_plane_helper_prepare_fb() (Daniel) * add tutorial-style documentation Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de
2021-02-21Merge tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-6/+1
Pull drm updates from Dave Airlie: "A pretty normal tree, lots of refactoring across the board, ttm, i915, nouveau, and bunch of features in various drivers. docs: - lots of updated docs core: - require crtc to have unique primary plane - fourcc macro fix - PCI bar quirk for bar resizing - don't sent hotplug on error - move vm code to legacy - nuke hose only used on old oboslete alpha dma-buf: - kernel doc updates - improved lock tracking dp/hdmi: - DP-HDMI2.1 protocol converter support ttm: - bo size handling cleanup - release a pinned bo warning - cleanup lru handler - avoid using pages with drm_prime_sg_to_page_addr_arrays cma-helper: - prime/mmap fixes bridge: - add DP support gma500: - remove gma3600 support i915: - try eDP fast/narrow link again with fallback - Intel eDP backlight control - replace display register read/write macros - refactor intel_display.c - display power improvements - HPD code cleanup - Rocketlake display fixes - Power/backlight/RPM fixes - DG1 display fix - IVB/BYT clear residuals security fix again - make i915 mitigations options via parameter - HSW GT1 GPU hangs fixes - DG1 workaround hang fixes - TGL DMAR hang avoidance - Lots of GT fixes - follow on fixes for residuals clear - gen7 per-engine-reset support - HDCP2.2 + HDCP1.4 GEN12 DP MST support - TGL clear color support - backlight refactoring - VRR/Adaptive sync enabling on DP/EDP for TGL+ - async flips for all ilk+ amdgpu: - rework IH ring handling (Vega/Navi) - rework HDP handling (Vega/Navi) - swSMU updates for renoir/vangogh - Sienna Cichild overdrive support - FP16 on DCE8-11 support - GPU reset on navy flounder/vangogh - SMU profile fixes for APU - SR-IOV fixes - Vangogh SMU fixes - fan speed control fixes amdkfd: - config handling fix - buffer free fix - recursive lock warnings fix nouveau: - Turing MMU fault recovery fixes - mDP connectors reporting fix - audio locking fixes - rework engines/instances code to support new scheme tegra: - VIC newer firmware support - display/gr2d fixes for older tegra - pm reference leak fix mediatek: - SOC MT8183 support - decouple sub driver + share mtk mutex driver radeon: - PCI resource fix for some platforms ingenic: - pm support - 8-bit delta RGB panels vmwgfx: - managed driver helpers vc4: - BCM2711 DSI1 support - converted to atomic helpers - enable 10/12 bpc outputs - gem prime mmap helpers - CEC fix omap: - use degamma table - CTM support - rework DSI support imx: - stack usage fixes - drm managed support - imx-tve clock provider leak fix - rcar-du: - default mode fixes - conversion to managed API hisilicon: - use simple encoder vkms: - writeback connector support d3: - BT2020 support" * tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm: (1459 commits) drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2) drm/radeon: OLAND boards don't have VCE drm/amdkfd: Fix recursive lock warnings drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth() drm/amd/display: Fix potential integer overflow drm/amdgpu/display: remove hdcp_srm sysfs on device removal drm/amdgpu: fix CGTS_TCC_DISABLE register offset on gfx10.3 drm/i915/gt: Correct surface base address for renderclear drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling drm/nouveau/top/ga100: initial support drm/nouveau/top: add ioctrl/nvjpg drm/nouveau/privring: rename from ibus drm/nouveau/nvkm: remove nvkm_subdev.index drm/nouveau/nvkm: determine subdev id/order from layout drm/nouveau/vic: switch to instanced constructor drm/nouveau/sw: switch to instanced constructor drm/nouveau/sec2: switch to instanced constructor drm/nouveau/sec: switch to instanced constructor drm/nouveau/pm: switch to instanced constructor drm/nouveau/nvenc: switch to instanced constructor ...
2021-02-02drm/vc4: hvs: Fix buffer overflow with the dlist handlingMaxime Ripard1-4/+14
Commit 0a038c1c29a7 ("drm/vc4: Move LBM creation out of vc4_plane_mode_set()") changed the LBM allocation logic from first allocating the LBM memory for the plane to running mode_set, adding a gap in the LBM, and then running the dlist allocation filling that gap. The gap was introduced by incrementing the dlist array index, but was never checking whether or not we were over the array length, leading eventually to memory corruptions if we ever crossed this limit. vc4_dlist_write had that logic though, and was reallocating a larger dlist array when reaching the end of the buffer. Let's share the logic between both functions. Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Eric Anholt <eric@anholt.net> Fixes: 0a038c1c29a7 ("drm/vc4: Move LBM creation out of vc4_plane_mode_set()") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129160647.128373-1-maxime@cerno.tech
2021-01-25drm/vc4: Correct POS1_SCL for hvs5Dom Cobley1-2/+2
Fixes failure with 4096x1080 resolutions [ 284.315379] WARNING: CPU: 1 PID: 901 at drivers/gpu/drm/vc4/vc4_plane.c:981 vc4_plane_mode_set+0x1374/0x13c4 [ 284.315385] Modules linked in: ir_rc5_decoder rpivid_hevc(C) bcm2835_codec(C) bcm2835_isp(C) bcm2835_mmal_vchiq(C) bcm2835_gpiomem v4l2_mem2mem videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc cdc_acm xpad ir_rc6_decoder rc_rc6_mce gpio_ir_recv fuse [ 284.315509] CPU: 1 PID: 901 Comm: kodi.bin Tainted: G C 5.10.7 #1 [ 284.315514] Hardware name: BCM2711 [ 284.315518] Backtrace: [ 284.315533] [<c0cc5ca0>] (dump_backtrace) from [<c0cc6014>] (show_stack+0x20/0x24) [ 284.315540] r7:ffffffff r6:00000000 r5:68000013 r4:c18ecf1c [ 284.315549] [<c0cc5ff4>] (show_stack) from [<c0cca638>] (dump_stack+0xc4/0xf0) [ 284.315558] [<c0cca574>] (dump_stack) from [<c022314c>] (__warn+0xfc/0x158) [ 284.315564] r9:00000000 r8:00000009 r7:000003d5 r6:00000009 r5:c08cc7dc r4:c0fd09b8 [ 284.315572] [<c0223050>] (__warn) from [<c0cc67ec>] (warn_slowpath_fmt+0x74/0xe4) [ 284.315577] r7:c08cc7dc r6:000003d5 r5:c0fd09b8 r4:00000000 [ 284.315584] [<c0cc677c>] (warn_slowpath_fmt) from [<c08cc7dc>] (vc4_plane_mode_set+0x1374/0x13c4) [ 284.315589] r8:00000000 r7:00000000 r6:00001000 r5:c404c600 r4:c2e34600 [ 284.315596] [<c08cb468>] (vc4_plane_mode_set) from [<c08cc984>] (vc4_plane_atomic_check+0x40/0x1c0) [ 284.315601] r10:00000001 r9:c2e34600 r8:c0e67068 r7:c0fc44e0 r6:c2ce3640 r5:c3d636c0 [ 284.315605] r4:c2e34600 [ 284.315614] [<c08cc944>] (vc4_plane_atomic_check) from [<c0860504>] (drm_atomic_helper_check_planes+0xec/0x1ec) [ 284.315620] r9:c2e34600 r8:c0e67068 r7:c0fc44e0 r6:c2ce3640 r5:c3d636c0 r4:00000006 [ 284.315627] [<c0860418>] (drm_atomic_helper_check_planes) from [<c0860658>] (drm_atomic_helper_check+0x54/0x9c) [ 284.315633] r9:c2e35400 r8:00000006 r7:00000000 r6:c2ba7800 r5:c3d636c0 r4:00000000 [ 284.315641] [<c0860604>] (drm_atomic_helper_check) from [<c08b7ca8>] (vc4_atomic_check+0x25c/0x454) [ 284.315645] r7:00000000 r6:c2ba7800 r5:00000001 r4:c3d636c0 [ 284.315652] [<c08b7a4c>] (vc4_atomic_check) from [<c0881278>] (drm_atomic_check_only+0x5cc/0x7e0) [ 284.315658] r10:c404c6c8 r9:ffffffff r8:c472c480 r7:00000003 r6:c3d636c0 r5:00000000 [ 284.315662] r4:0000003c r3:c08b7a4c [ 284.315670] [<c0880cac>] (drm_atomic_check_only) from [<c089ba60>] (drm_mode_atomic_ioctl+0x758/0xa7c) [ 284.315675] r10:c3d46000 r9:c3d636c0 r8:c2ce8a70 r7:027e3a54 r6:00000043 r5:c1fbb800 [ 284.315679] r4:0281a858 [ 284.315688] [<c089b308>] (drm_mode_atomic_ioctl) from [<c086e9f8>] (drm_ioctl_kernel+0xc4/0x108) [ 284.315693] r10:c03864bc r9:c1fbb800 r8:c3d47e64 r7:c089b308 r6:00000002 r5:c2ba7800 [ 284.315697] r4:00000000 [ 284.315705] [<c086e934>] (drm_ioctl_kernel) from [<c086ee28>] (drm_ioctl+0x1e8/0x3a0) [ 284.315711] r9:c1fbb800 r8:000000bc r7:c3d47e64 r6:00000038 r5:c0e59570 r4:00000038 [ 284.315719] [<c086ec40>] (drm_ioctl) from [<c041f354>] (sys_ioctl+0x35c/0x914) [ 284.315724] r10:c2d08200 r9:00000000 r8:c36fa300 r7:befdd870 r6:c03864bc r5:c36fa301 [ 284.315728] r4:c03864bc [ 284.315735] [<c041eff8>] (sys_ioctl) from [<c0200040>] (ret_fast_syscall+0x0/0x28) [ 284.315739] Exception stack(0xc3d47fa8 to 0xc3d47ff0) [ 284.315745] 7fa0: 027eb750 befdd870 00000000 c03864bc befdd870 00000000 [ 284.315750] 7fc0: 027eb750 befdd870 c03864bc 00000036 027e3948 0281a640 0281a850 027e3a50 [ 284.315756] 7fe0: b4b64100 befdd844 b4b5ba2c b49c994c [ 284.315762] r10:00000036 r9:c3d46000 r8:c0200204 r7:00000036 r6:c03864bc r5:befdd870 [ 284.315765] r4:027eb750 Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Tested-By: Lucas Nussbaum <lucas@debian.org> Tested-By: Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp> Link: https://patchwork.freedesktop.org/patch/msgid/20210121105759.1262699-2-maxime@cerno.tech
2021-01-25drm/vc4: Correct lbm size and calculationDom Cobley1-1/+6
LBM base address is measured in units of pixels per cycle. That is 4 for 2711 (hvs5) and 2 for 2708. We are wasting 75% of lbm by indexing without the scaling. But we were also using too high a size for the lbm resulting in partial corruption (right hand side) of vertically scaled images, usually at 4K or lower resolutions with more layers. The physical RAM of LBM on 2711 is 8 * 1920 * 16 * 12-bit (pixels are stored 12-bits per component regardless of format). The LBM address indexes work in units of pixels per clock, so for 4 pixels per clock that means we have 32 * 1920 = 60K Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Tested-By: Lucas Nussbaum <lucas@debian.org> Tested-By: Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp> Link: https://patchwork.freedesktop.org/patch/msgid/20210121105759.1262699-1-maxime@cerno.tech
2021-01-05drm: vc4: Remove unnecessary drm_plane_cleanup() wrapperLaurent Pinchart1-6/+1
Use the drm_plane_cleanup() function directly as the drm_plane_funcs .destroy() handler without creating an unnecessary wrapper around it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-16drm/vc4: Handing the return value of drm_universal_plane_initTian Tao1-0/+2
Handing the return value of drm_universal_plane_init to fix the following W=1 kernel build warning(s): vc4_plane.c: In function ‘vc4_plane_init’: vc4_plane.c:1340:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1599811777-34093-1-git-send-email-tiantao6@hisilicon.com
2020-09-11drm/vc4: Fix bitwise OR versus ternary operator in vc4_plane_mode_setNathan Chancellor1-2/+2
Clang warns: drivers/gpu/drm/vc4/vc4_plane.c:901:27: warning: operator '?:' has lower precedence than '|'; '|' will be evaluated first [-Wbitwise-conditional-parentheses] fb->format->has_alpha ? ~~~~~~~~~~~~~~~~~~~~~ ^ drivers/gpu/drm/vc4/vc4_plane.c:901:27: note: place parentheses around the '|' expression to silence this warning fb->format->has_alpha ? ~~~~~~~~~~~~~~~~~~~~~ ^ drivers/gpu/drm/vc4/vc4_plane.c:901:27: note: place parentheses around the '?:' expression to evaluate it first fb->format->has_alpha ? ~~~~~~~~~~~~~~~~~~~~~~^ 1 warning generated. Add the parentheses as that was clearly intended, otherwise SCALER5_CTL2_ALPHA_PREMULT won't be added to the list. Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1150 Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200910171831.4112580-1-natechancellor@gmail.com
2020-09-07drm/vc4: drv: Support BCM2711Maxime Ripard1-0/+5
The BCM2711 has a reworked display pipeline, and the load tracker needs some adjustment to operate properly. Let's add a compatible for BCM2711 and disable the load tracker until properly supported. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/beac4f9ef0261bca731a0402c8354e9af740519c.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: plane: Create more planesMaxime Ripard1-1/+1
Let's now create more planes that can be affected to all the CRTCs. vc4 has 3 CRTCs, 1 primary and 1 cursor each, and was having 24 (8 planes per CRTC) overlays. However, vc5 has 5 CRTCs, so keeping the same logic would put us at 50 planes which is well above the 32 planes limit imposed by DRM. Using 16 seems like a good tradeoff between staying under 32 and yet providing enough planes. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/b41003001541fc2bb23668c699c0369ff7983be8.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: plane: Optimize the LBM allocation sizeDave Stevenson1-4/+13
The current code is using the maximum of the source line size and the destination line size to compute the size of the LBM to allocate. While this is simpler, it starts to be an issue with modes such as 4k with a quite long that will consume all the available memory, so we no longer have that luxury. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/b9e091883a4f7395c5b6a4f7c6070225934293db.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: plane: Change LBM alignment constraint on LBMDave Stevenson1-1/+3
The HVS5 needs an alignment of 64bytes for its LBM memory, so let's reflect it. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/6f9c4fe1eb9258a3f1d0f21af6a99c42472ac531.1599120059.git-series.maxime@cerno.tech
Powered by cgit, Gruvboxed by Blaster4385.