aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/vc4/vc4_plane.c
AgeCommit message (Collapse)AuthorFilesLines
2022-07-13Backmerge tag 'v5.19-rc6' of ↵Dave Airlie1-8/+21
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge in rc6 so I can merge msm next easier. Linux 5.19-rc6 Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-06-28drm/vc4: plane: Add alpha_blend_mode property to each plane.Dave Stevenson1-13/+49
Move from only supporting the default of pre-multiplied alpha to supporting user specified blend mode using the standardised property. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-7-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-06-28drm/vc4: plane: Fix margin calculations for the right/bottom edgesDave Stevenson1-4/+4
The current plane margin calculation code clips the right and bottom edges of the range based using the left and top margins. This is obviously wrong, so let's fix it. Fixes: 666e73587f90 ("drm/vc4: Take margin setup into account when updating planes") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-6-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-06-28drm/vc4: plane: Remove subpixel positioning checkDom Cobley1-13/+9
There is little harm in ignoring fractional coordinates (they just get truncated). Without this: modetest -M vc4 -F tiles,gradient -s 32:1920x1080-60 -P89@74:1920x1080*.1.1@XR24 is rejected. We have the same issue in Kodi when trying to use zoom options on video. Note: even if all coordinates are fully integer. e.g. src:[0,0,1920,1080] dest:[-10,-10,1940,1100] it will still get rejected as drm_atomic_helper_check_plane_state uses drm_rect_clip_scaled which transforms this to fractional src coords Fixes: 21af94cf1a4c ("drm/vc4: Add support for scaling of display planes.") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Link: https://lore.kernel.org/r/20220613144800.326124-5-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-06-20drm: Drop drm_blend.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for drm_blend.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_blend.h. Quite a few placs do currently depend on drm_blend.h without actually including it directly. All of those need to be fixed up. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220613200317.11305-4-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-06-20drm: Drop drm_framebuffer.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for drm_frambuffer.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_framebuffer.h. Quite a few placs do currently depend on drm_framebuffer.h without actually including it directly. All of those need to be fixed up. v2: Fix up msm some more v2: Deal with ingenic and shmobile as well Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-06-16drm/vc4: plane: Register a different drm_plane_helper_funcs on BCM2711Maxime Ripard1-1/+11
On the BCM2711, our current definition of drm_plane_helper_funcs uses the custom vc4_prepare_fb() and vc4_cleanup_fb(). Those functions rely on the buffer allocation path that was relying on the GPU, and is no longer relevant. Let's create another drm_plane_helper_funcs structure that we will register on the BCM2711. Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220610115149.964394-8-maxime@cerno.tech
2022-06-16drm/vc4: Consolidate Hardware Revision CheckMaxime Ripard1-7/+6
A new generation of controller has been introduced with the BCM2711/RaspberryPi4. This generation needs a bunch of quirks, and over time we've piled on a number of checks in most parts of the drivers. All these checks are performed several times, and are not always consistent. Let's create a single, global, variable to hold it and use it everywhere. Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220610115149.964394-3-maxime@cerno.tech
2022-06-16drm/vc4: plane: Prevent async update if we don't have a dlistMaxime Ripard1-0/+4
The vc4 planes are setup in hardware by creating a hardware descriptor in a dedicated RAM. As part of the process to setup a plane in KMS, we thus need to allocate some part of that dedicated RAM to store our descriptor there. The async update path will just reuse the descriptor already allocated for that plane and will modify it directly in RAM to match whatever has been asked for. In order to do that, it will compare the descriptor for the old plane state and the new plane state, will make sure they fit in the same size, and check that only the position or buffer address have changed. Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220610115149.964394-2-maxime@cerno.tech
2022-04-29drm/vc4: simplify the return expression of vc4_prepare_fb()Minghao Chi1-6/+1
Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220429054945.3852039-1-chi.minghao@zte.com.cn
2021-12-16drm/vc4: plane: Add support for YUV color encodings and rangesDave Stevenson1-3/+68
The BT601/BT709 color encoding and limited vs full range properties were not being exposed, defaulting always to BT601 limited range. Expose the parameters and set the registers appropriately. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20211215091739.135042-4-maxime@cerno.tech
2021-12-16drm/vc4: plane: Add support for DRM_FORMAT_P030Dave Stevenson1-31/+96
The P030 format, used with the DRM_FORMAT_MOD_BROADCOM_SAND128 modifier, is a format output by the video decoder on the BCM2711. Add native support to the KMS planes for that format. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20211215091739.135042-3-maxime@cerno.tech
2021-11-04drm/vc4: Leverage the load tracker on the BCM2711Maxime Ripard1-5/+0
The load tracker was initially designed to report and warn about a load too high for the HVS. To do so, it computes for each plane the impact it's going to have on the HVS, and will warn (if it's enabled) if we go over what the hardware can process. While the limits being used are a bit irrelevant to the BCM2711, the algorithm to compute the HVS load will be one component used in order to compute the core clock rate on the BCM2711. Let's remove the hooks to prevent the load tracker to do its computation, but since we don't have the same limits, don't check them against them, and prevent the debugfs file to enable it from being created. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-8-maxime@cerno.tech
2021-04-13Merge drm/drm-fixes into drm-nextDaniel Vetter1-1/+0
msm-next pull request has a baseline with stuff from -fixes, roll forward first. Some simple conflicts in amdgpu, ttm and one in i915 where git gets confused and tries to add the same function twice. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-04-08drm/vc4: plane: Remove redundant assignmentMaxime Ripard1-1/+0
The vc4_plane_atomic_async_update function assigns twice in a row the src_h field in the drm_plane_state structure to the same value. Remove the second one. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161328.1471556-2-maxime@cerno.tech
2021-03-16Merge tag 'drm-misc-next-2021-03-03' of ↵Dave Airlie1-35/+41
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
2021-02-25drm/atomic: Pass the full state to planes atomic disable and updateMaxime Ripard1-1/+1
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes atomic_checkMaxime Ripard1-1/+3
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_check. The conversion was done using the coccinelle script below plus some manual changes for vmwgfx, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_check(plane, plane_state) + FUNCS->atomic_check(plane, state) ...+> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *new_plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
2021-02-24drm: Rename plane atomic_check state namesMaxime Ripard1-5/+5
Most drivers call the argument to the plane atomic_check hook simply state, which is going to conflict with the global atomic state in a later rework. Let's rename it to new_plane_state (or new_state depending on the convention used in the driver). This was done using the coccinelle script below, and built tested: @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { .atomic_check = func, }; @ has_old_state @ identifier plane_atomic_func.func; identifier plane; expression e; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *old_state = e; ... } @ depends on has_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_state ) { <+... - state + new_state ...+> } @ has_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... } @ depends on has_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_plane_state ) { <+... - state + new_plane_state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes async atomic check and updateMaxime Ripard1-27/+31
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_async_check and atomic_async_update. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_async_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_async_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_async_check = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_async_update = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_async_check(plane, plane_state) + FUNCS->atomic_async_check(plane, state) ...+> } @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_async_update(plane, plane_state) + FUNCS->atomic_async_update(plane, state) ...+> } @@ identifier mtk_plane_atomic_async_update; identifier plane; symbol new_state, state; expression e; @@ void mtk_plane_atomic_async_update(struct drm_plane *plane, struct drm_plane_state *new_state) { ... - struct mtk_plane_state *state = e; + struct mtk_plane_state *new_plane_state = e; <+... - state + new_plane_state ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *new_plane_state) { <... - state + new_plane_state ...> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <+... - plane_state->state + state ...+> } Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-1-maxime@cerno.tech
2021-02-23drm/gem: Move drm_gem_fb_prepare_fb() to GEM atomic helpersThomas Zimmermann1-2/+2
The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting, but currently located next to framebuffer helpers. Move it to GEM atomic helpers, rename it slightly and adopt the drivers. Same for the rsp simple-pipe helper. Compile-tested with x86-64, aarch64 and arm. The patch is fairly large, but there are no functional changes. v3: * remove out-comented line in drm_gem_framebuffer_helper.h (Maxime) v2: * rename to drm_gem_plane_helper_prepare_fb() (Daniel) * add tutorial-style documentation Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de
2021-02-21Merge tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-6/+1
Pull drm updates from Dave Airlie: "A pretty normal tree, lots of refactoring across the board, ttm, i915, nouveau, and bunch of features in various drivers. docs: - lots of updated docs core: - require crtc to have unique primary plane - fourcc macro fix - PCI bar quirk for bar resizing - don't sent hotplug on error - move vm code to legacy - nuke hose only used on old oboslete alpha dma-buf: - kernel doc updates - improved lock tracking dp/hdmi: - DP-HDMI2.1 protocol converter support ttm: - bo size handling cleanup - release a pinned bo warning - cleanup lru handler - avoid using pages with drm_prime_sg_to_page_addr_arrays cma-helper: - prime/mmap fixes bridge: - add DP support gma500: - remove gma3600 support i915: - try eDP fast/narrow link again with fallback - Intel eDP backlight control - replace display register read/write macros - refactor intel_display.c - display power improvements - HPD code cleanup - Rocketlake display fixes - Power/backlight/RPM fixes - DG1 display fix - IVB/BYT clear residuals security fix again - make i915 mitigations options via parameter - HSW GT1 GPU hangs fixes - DG1 workaround hang fixes - TGL DMAR hang avoidance - Lots of GT fixes - follow on fixes for residuals clear - gen7 per-engine-reset support - HDCP2.2 + HDCP1.4 GEN12 DP MST support - TGL clear color support - backlight refactoring - VRR/Adaptive sync enabling on DP/EDP for TGL+ - async flips for all ilk+ amdgpu: - rework IH ring handling (Vega/Navi) - rework HDP handling (Vega/Navi) - swSMU updates for renoir/vangogh - Sienna Cichild overdrive support - FP16 on DCE8-11 support - GPU reset on navy flounder/vangogh - SMU profile fixes for APU - SR-IOV fixes - Vangogh SMU fixes - fan speed control fixes amdkfd: - config handling fix - buffer free fix - recursive lock warnings fix nouveau: - Turing MMU fault recovery fixes - mDP connectors reporting fix - audio locking fixes - rework engines/instances code to support new scheme tegra: - VIC newer firmware support - display/gr2d fixes for older tegra - pm reference leak fix mediatek: - SOC MT8183 support - decouple sub driver + share mtk mutex driver radeon: - PCI resource fix for some platforms ingenic: - pm support - 8-bit delta RGB panels vmwgfx: - managed driver helpers vc4: - BCM2711 DSI1 support - converted to atomic helpers - enable 10/12 bpc outputs - gem prime mmap helpers - CEC fix omap: - use degamma table - CTM support - rework DSI support imx: - stack usage fixes - drm managed support - imx-tve clock provider leak fix - rcar-du: - default mode fixes - conversion to managed API hisilicon: - use simple encoder vkms: - writeback connector support d3: - BT2020 support" * tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm: (1459 commits) drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2) drm/radeon: OLAND boards don't have VCE drm/amdkfd: Fix recursive lock warnings drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth() drm/amd/display: Fix potential integer overflow drm/amdgpu/display: remove hdcp_srm sysfs on device removal drm/amdgpu: fix CGTS_TCC_DISABLE register offset on gfx10.3 drm/i915/gt: Correct surface base address for renderclear drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling drm/nouveau/top/ga100: initial support drm/nouveau/top: add ioctrl/nvjpg drm/nouveau/privring: rename from ibus drm/nouveau/nvkm: remove nvkm_subdev.index drm/nouveau/nvkm: determine subdev id/order from layout drm/nouveau/vic: switch to instanced constructor drm/nouveau/sw: switch to instanced constructor drm/nouveau/sec2: switch to instanced constructor drm/nouveau/sec: switch to instanced constructor drm/nouveau/pm: switch to instanced constructor drm/nouveau/nvenc: switch to instanced constructor ...
2021-02-02drm/vc4: hvs: Fix buffer overflow with the dlist handlingMaxime Ripard1-4/+14
Commit 0a038c1c29a7 ("drm/vc4: Move LBM creation out of vc4_plane_mode_set()") changed the LBM allocation logic from first allocating the LBM memory for the plane to running mode_set, adding a gap in the LBM, and then running the dlist allocation filling that gap. The gap was introduced by incrementing the dlist array index, but was never checking whether or not we were over the array length, leading eventually to memory corruptions if we ever crossed this limit. vc4_dlist_write had that logic though, and was reallocating a larger dlist array when reaching the end of the buffer. Let's share the logic between both functions. Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Eric Anholt <eric@anholt.net> Fixes: 0a038c1c29a7 ("drm/vc4: Move LBM creation out of vc4_plane_mode_set()") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129160647.128373-1-maxime@cerno.tech
2021-01-25drm/vc4: Correct POS1_SCL for hvs5Dom Cobley1-2/+2
Fixes failure with 4096x1080 resolutions [ 284.315379] WARNING: CPU: 1 PID: 901 at drivers/gpu/drm/vc4/vc4_plane.c:981 vc4_plane_mode_set+0x1374/0x13c4 [ 284.315385] Modules linked in: ir_rc5_decoder rpivid_hevc(C) bcm2835_codec(C) bcm2835_isp(C) bcm2835_mmal_vchiq(C) bcm2835_gpiomem v4l2_mem2mem videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc cdc_acm xpad ir_rc6_decoder rc_rc6_mce gpio_ir_recv fuse [ 284.315509] CPU: 1 PID: 901 Comm: kodi.bin Tainted: G C 5.10.7 #1 [ 284.315514] Hardware name: BCM2711 [ 284.315518] Backtrace: [ 284.315533] [<c0cc5ca0>] (dump_backtrace) from [<c0cc6014>] (show_stack+0x20/0x24) [ 284.315540] r7:ffffffff r6:00000000 r5:68000013 r4:c18ecf1c [ 284.315549] [<c0cc5ff4>] (show_stack) from [<c0cca638>] (dump_stack+0xc4/0xf0) [ 284.315558] [<c0cca574>] (dump_stack) from [<c022314c>] (__warn+0xfc/0x158) [ 284.315564] r9:00000000 r8:00000009 r7:000003d5 r6:00000009 r5:c08cc7dc r4:c0fd09b8 [ 284.315572] [<c0223050>] (__warn) from [<c0cc67ec>] (warn_slowpath_fmt+0x74/0xe4) [ 284.315577] r7:c08cc7dc r6:000003d5 r5:c0fd09b8 r4:00000000 [ 284.315584] [<c0cc677c>] (warn_slowpath_fmt) from [<c08cc7dc>] (vc4_plane_mode_set+0x1374/0x13c4) [ 284.315589] r8:00000000 r7:00000000 r6:00001000 r5:c404c600 r4:c2e34600 [ 284.315596] [<c08cb468>] (vc4_plane_mode_set) from [<c08cc984>] (vc4_plane_atomic_check+0x40/0x1c0) [ 284.315601] r10:00000001 r9:c2e34600 r8:c0e67068 r7:c0fc44e0 r6:c2ce3640 r5:c3d636c0 [ 284.315605] r4:c2e34600 [ 284.315614] [<c08cc944>] (vc4_plane_atomic_check) from [<c0860504>] (drm_atomic_helper_check_planes+0xec/0x1ec) [ 284.315620] r9:c2e34600 r8:c0e67068 r7:c0fc44e0 r6:c2ce3640 r5:c3d636c0 r4:00000006 [ 284.315627] [<c0860418>] (drm_atomic_helper_check_planes) from [<c0860658>] (drm_atomic_helper_check+0x54/0x9c) [ 284.315633] r9:c2e35400 r8:00000006 r7:00000000 r6:c2ba7800 r5:c3d636c0 r4:00000000 [ 284.315641] [<c0860604>] (drm_atomic_helper_check) from [<c08b7ca8>] (vc4_atomic_check+0x25c/0x454) [ 284.315645] r7:00000000 r6:c2ba7800 r5:00000001 r4:c3d636c0 [ 284.315652] [<c08b7a4c>] (vc4_atomic_check) from [<c0881278>] (drm_atomic_check_only+0x5cc/0x7e0) [ 284.315658] r10:c404c6c8 r9:ffffffff r8:c472c480 r7:00000003 r6:c3d636c0 r5:00000000 [ 284.315662] r4:0000003c r3:c08b7a4c [ 284.315670] [<c0880cac>] (drm_atomic_check_only) from [<c089ba60>] (drm_mode_atomic_ioctl+0x758/0xa7c) [ 284.315675] r10:c3d46000 r9:c3d636c0 r8:c2ce8a70 r7:027e3a54 r6:00000043 r5:c1fbb800 [ 284.315679] r4:0281a858 [ 284.315688] [<c089b308>] (drm_mode_atomic_ioctl) from [<c086e9f8>] (drm_ioctl_kernel+0xc4/0x108) [ 284.315693] r10:c03864bc r9:c1fbb800 r8:c3d47e64 r7:c089b308 r6:00000002 r5:c2ba7800 [ 284.315697] r4:00000000 [ 284.315705] [<c086e934>] (drm_ioctl_kernel) from [<c086ee28>] (drm_ioctl+0x1e8/0x3a0) [ 284.315711] r9:c1fbb800 r8:000000bc r7:c3d47e64 r6:00000038 r5:c0e59570 r4:00000038 [ 284.315719] [<c086ec40>] (drm_ioctl) from [<c041f354>] (sys_ioctl+0x35c/0x914) [ 284.315724] r10:c2d08200 r9:00000000 r8:c36fa300 r7:befdd870 r6:c03864bc r5:c36fa301 [ 284.315728] r4:c03864bc [ 284.315735] [<c041eff8>] (sys_ioctl) from [<c0200040>] (ret_fast_syscall+0x0/0x28) [ 284.315739] Exception stack(0xc3d47fa8 to 0xc3d47ff0) [ 284.315745] 7fa0: 027eb750 befdd870 00000000 c03864bc befdd870 00000000 [ 284.315750] 7fc0: 027eb750 befdd870 c03864bc 00000036 027e3948 0281a640 0281a850 027e3a50 [ 284.315756] 7fe0: b4b64100 befdd844 b4b5ba2c b49c994c [ 284.315762] r10:00000036 r9:c3d46000 r8:c0200204 r7:00000036 r6:c03864bc r5:befdd870 [ 284.315765] r4:027eb750 Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Tested-By: Lucas Nussbaum <lucas@debian.org> Tested-By: Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp> Link: https://patchwork.freedesktop.org/patch/msgid/20210121105759.1262699-2-maxime@cerno.tech
2021-01-25drm/vc4: Correct lbm size and calculationDom Cobley1-1/+6
LBM base address is measured in units of pixels per cycle. That is 4 for 2711 (hvs5) and 2 for 2708. We are wasting 75% of lbm by indexing without the scaling. But we were also using too high a size for the lbm resulting in partial corruption (right hand side) of vertically scaled images, usually at 4K or lower resolutions with more layers. The physical RAM of LBM on 2711 is 8 * 1920 * 16 * 12-bit (pixels are stored 12-bits per component regardless of format). The LBM address indexes work in units of pixels per clock, so for 4 pixels per clock that means we have 32 * 1920 = 60K Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Tested-By: Lucas Nussbaum <lucas@debian.org> Tested-By: Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp> Link: https://patchwork.freedesktop.org/patch/msgid/20210121105759.1262699-1-maxime@cerno.tech
2021-01-05drm: vc4: Remove unnecessary drm_plane_cleanup() wrapperLaurent Pinchart1-6/+1
Use the drm_plane_cleanup() function directly as the drm_plane_funcs .destroy() handler without creating an unnecessary wrapper around it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-16drm/vc4: Handing the return value of drm_universal_plane_initTian Tao1-0/+2
Handing the return value of drm_universal_plane_init to fix the following W=1 kernel build warning(s): vc4_plane.c: In function ‘vc4_plane_init’: vc4_plane.c:1340:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1599811777-34093-1-git-send-email-tiantao6@hisilicon.com
2020-09-11drm/vc4: Fix bitwise OR versus ternary operator in vc4_plane_mode_setNathan Chancellor1-2/+2
Clang warns: drivers/gpu/drm/vc4/vc4_plane.c:901:27: warning: operator '?:' has lower precedence than '|'; '|' will be evaluated first [-Wbitwise-conditional-parentheses] fb->format->has_alpha ? ~~~~~~~~~~~~~~~~~~~~~ ^ drivers/gpu/drm/vc4/vc4_plane.c:901:27: note: place parentheses around the '|' expression to silence this warning fb->format->has_alpha ? ~~~~~~~~~~~~~~~~~~~~~ ^ drivers/gpu/drm/vc4/vc4_plane.c:901:27: note: place parentheses around the '?:' expression to evaluate it first fb->format->has_alpha ? ~~~~~~~~~~~~~~~~~~~~~~^ 1 warning generated. Add the parentheses as that was clearly intended, otherwise SCALER5_CTL2_ALPHA_PREMULT won't be added to the list. Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1150 Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200910171831.4112580-1-natechancellor@gmail.com
2020-09-07drm/vc4: drv: Support BCM2711Maxime Ripard1-0/+5
The BCM2711 has a reworked display pipeline, and the load tracker needs some adjustment to operate properly. Let's add a compatible for BCM2711 and disable the load tracker until properly supported. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/beac4f9ef0261bca731a0402c8354e9af740519c.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: plane: Create more planesMaxime Ripard1-1/+1
Let's now create more planes that can be affected to all the CRTCs. vc4 has 3 CRTCs, 1 primary and 1 cursor each, and was having 24 (8 planes per CRTC) overlays. However, vc5 has 5 CRTCs, so keeping the same logic would put us at 50 planes which is well above the 32 planes limit imposed by DRM. Using 16 seems like a good tradeoff between staying under 32 and yet providing enough planes. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/b41003001541fc2bb23668c699c0369ff7983be8.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: plane: Optimize the LBM allocation sizeDave Stevenson1-4/+13
The current code is using the maximum of the source line size and the destination line size to compute the size of the LBM to allocate. While this is simpler, it starts to be an issue with modes such as 4k with a quite long that will consume all the available memory, so we no longer have that luxury. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/b9e091883a4f7395c5b6a4f7c6070225934293db.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: plane: Change LBM alignment constraint on LBMDave Stevenson1-1/+3
The HVS5 needs an alignment of 64bytes for its LBM memory, so let's reflect it. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/6f9c4fe1eb9258a3f1d0f21af6a99c42472ac531.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: Add support for the BCM2711 HVS5Dave Stevenson1-52/+142
The HVS found in the BCM2711 is slightly different from the previous generations. Most notably, the display list layout changes a bit, the LBM doesn't have the same size and the formats ordering for some formats is swapped. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1d02fab3b916d639c2dc05608c117bbd8230ebe8.1599120059.git-series.maxime@cerno.tech
2020-06-10drm/vc4: plane: Move additional planes creation to driverMaxime Ripard1-11/+14
So far the plane creation was done when each CRTC was bound, and those planes were only tied to the CRTC that was registering them. This causes two main issues: - The planes in the vc4 hardware are actually not tied to any CRTC, but can be used with every combination - More importantly, so far, we allocate 10 planes per CRTC, with 3 CRTCs. However, the next generation of hardware will have 5 CRTCs, putting us well above the maximum of 32 planes currently allowed by DRM. This patch is the first one in a series of patches that will take down both of these issues so that we can support the next generation of hardware while keeping a good amount of planes. We start by changing the way the planes are registered to first registering the primary planes for each CRTC in the CRTC bind function as we used to, but moving the overlay and cursor creation to the main driver bind function, after all the CRTCs have been bound, and make the planes associated to all CRTCs. This will slightly change the ID order of the planes, since the primary planes of all CRTCs will be first, and then a pattern of 8 overlays, 1 cursor plane for each CRTC. This shouldn't cause any trouble since the ordering between the planes is preserved though. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/0b85a3fdb20bb4ff85fb62cabd082d5a65e2730b.1590594512.git-series.maxime@cerno.tech
2020-06-10drm/vc4: plane: Move planes creation to its own functionMaxime Ripard1-0/+38
The planes so far were created as part of the CRTC binding code with each planes created associated only to one CRTC. However, the hardware in the vc4 doesn't really have such constraint and can be used with any CRTC. In order to rework this, let's first move the overlay and cursor planes creation to a function of its own. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/a378ea56214179f1f25fcd36ecc69511edd1e790.1590594512.git-series.maxime@cerno.tech
2020-01-28drm/vc4: plane_state->fb iff plane_state->crtcDaniel Vetter1-1/+1
Checking both is one too much, so wrap a WARN_ON around it to stope the copypasta. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-7-daniel.vetter@ffwll.ch
2019-10-04drm/mm: Use helpers for drm_mm_node booleansChris Wilson1-2/+2
In preparation for rearranging the booleans into a flags field, ensure all the current users are using the inline helpers and not directly accessing the members. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191003210100.22250-3-chris@chris-wilson.co.uk
2019-07-22Merge v5.3-rc1 into drm-misc-nextMaxime Ripard1-4/+1
Noralf needs some SPI patches in 5.3 to merge some work on tinydrm. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-17drm/vc4: drop use of drmP.hSam Ravnborg1-2/+4
Drop use of the deprecated header drmP.h. Fix so vc4_drv.h is now self-contained, and fixed fall-out in remaining files. Divided include files in blocks. Sorted include files within their blocks. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-7-sam@ravnborg.org
2019-07-15Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-10/+5
Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ...
2019-06-28drm/vc4: Use drm_gem_fb_prepare_fbDaniel Vetter1-3/+2
vc4 has switched to using drm_fb->obj[], so we can just use the helper unchanged. v2: Make it compile ... oops. Cc: Eric Anholt <eric@anholt.net> Cc: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190625204208.5614-4-daniel.vetter@ffwll.ch
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19Merge v5.2-rc5 into drm-nextDaniel Vetter1-1/+1
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier removal topic branch into drm-misc-next. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-06-04drm/vc4: fix fb references in async updateHelen Koike1-1/+1
Async update callbacks are expected to set the old_fb in the new_state so prepare/cleanup framebuffers are balanced. Calling drm_atomic_set_fb_for_plane() (which gets a reference of the new fb and put the old fb) is not required, as it's taken care by drm_mode_cursor_universal() when calling drm_atomic_helper_update_plane(). Cc: <stable@vger.kernel.org> # v4.19+ Fixes: 539c320bfa97 ("drm/vc4: update cursors asynchronously through atomic") Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-5-helen.koike@collabora.com
2019-05-20drm: Remove users of drm_format_(horz|vert)_chroma_subsamplingMaxime Ripard1-9/+4
drm_format_horz_chroma_subsampling and drm_format_vert_chroma_subsampling are basically a lookup in the drm_format_info table plus an access to the hsub and vsub fields of the appropriate entry. Most drivers are using this function while having access to the entry already, which means that we will perform an unnecessary lookup. Removing the call to these functions is therefore more efficient. Some drivers will not have access to that entry in the function, but in this case the overhead is minimal (we just have to call drm_format_info() to perform the lookup) and we can even avoid multiple, inefficient lookups in some places that need multiple fields from the drm_format_info structure. This is amplified by the fact that most of the time the callers will have to retrieve both the vsub and hsub fields, meaning that they would perform twice the lookup. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/6b3cceb8161e2c1d40c2681de99202328b0a8abc.1558002671.git-series.maxime.ripard@bootlin.com
2019-05-20drm: Remove users of drm_format_num_planesMaxime Ripard1-1/+1
drm_format_num_planes() is basically a lookup in the drm_format_info table plus an access to the num_planes field of the appropriate entry. Most drivers are using this function while having access to the entry already, which means that we will perform an unnecessary lookup. Removing the call to drm_format_num_planes is therefore more efficient. Some drivers will not have access to that entry in the function, but in this case the overhead is minimal (we just have to call drm_format_info() to perform the lookup) and we can even avoid multiple, inefficient lookups in some places that need multiple fields from the drm_format_info structure. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/5ffcec9d14a50ed538e37d565f546802452ee672.1558002671.git-series.maxime.ripard@bootlin.com
2019-03-06drm/vc4: Add a load tracker to prevent HVS underflow errorsBoris Brezillon1-0/+57
The HVS block is supposed to fill the pixelvalve FIFOs fast enough to meet the requested framerate. The problem is, the HVS and memory bus bandwidths are limited, and if we don't take these limitations into account we might end up with HVS underflow errors. This patch is trying to model the per-plane HVS and memory bus bandwidth consumption and take a decision at atomic_check() time whether the estimated load will fit in the HVS and membus budget. Note that we take an extra margin on the memory bus consumption to let the system run smoothly when other blocks are doing heavy use of the memory bus. Same goes for the HVS limit, except the margin is smaller in this case, since the HVS is not used by external components. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190220155124.25022-3-paul.kocialkowski@bootlin.com
2019-02-19drm: vc4: Switch to use drm_gem_object reservation_objectRob Herring1-1/+1
Now that the base struct drm_gem_object has a reservation_object, use it and remove the private BO one. Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190202154158.10443-6-robh@kernel.org Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-11drm/vc4: Limit SAND tiling support to semiplanar YUV420 formatsPaul Kocialkowski1-16/+1
Despite what the HVS documentation indicates, the VC4 does not actually support SAND tiling modes for any RGB format and only semiplanar YUV420 formats (NV12/NV21) can be used in these tiling modes. The driver currently claims to support RGB formats for the associated modifiers, so remove them from the supported list in the format_mod_supported helper for RGB formats. Remove further checks that are no longer necessary along the way, since semi-planar YUV420 formats support every SAND tiling mode. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181214141218.12671-1-paul.kocialkowski@bootlin.com
2018-12-19drm/vc4: Take margin setup into account when updating planesBoris Brezillon1-0/+50
Applyin margins is just a matter of scaling all planes appropriately and adjusting the CRTC X/Y offset to account for the left/right/top/bottom borders. Create a vc4_plane_margins_adj() function doing that and call it from vc4_plane_setup_clipping_and_scaling() so that we are ready to attach margins properties to the HDMI connector. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-5-boris.brezillon@bootlin.com
Powered by cgit, Gruvboxed by Blaster4385.