aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/vc4/vc4_hdmi.h
AgeCommit message (Collapse)AuthorFilesLines
2020-09-07drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streamingDave Stevenson1-0/+2
If the encoder is disabled and re-enabled (eg mode change) all infoframes are reset, whilst the audio subsystem know nothing about this change. The driver therefore needs to reinstate the audio infoframe for itself. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/cd579ccc2c9b9d2fce0ebaf32f847cedb0e4a7a2.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rateMaxime Ripard1-0/+3
The HSM clock needs to be setup at around 101% of the pixel rate. This was done previously by setting the clock rate to 163.7MHz at probe time and only check in mode_valid whether the mode pixel clock was under the pixel clock +1% or not. However, with 4k we need to change that frequency to a higher frequency than 163.7MHz, and yet want to have the lowest clock as possible to have a decent power saving. Let's change that logic a bit by setting the clock rate of the HSM clock to the pixel rate at encoder_enable time. This would work for the BCM2711 that support 4k resolutions and has a clock that can provide it, but we still have to take care of a 4k panel plugged on a BCM283x SoCs that wouldn't be able to use those modes, so let's define the limit in the variant. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/7e692ddc231d33dd671e70ea04dd1dcf56c1ecb3.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add CEC support flagMaxime Ripard1-0/+3
Similarly to the audio support, CEC support is not there yet for the BCM2711, so let's skip entirely the CEC initialization through a variant flag. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/bd0c4afa83b4e121692352cdc2dd1886162c7552.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Deal with multiple debugfs filesMaxime Ripard1-0/+3
The HDMI driver was registering a single debugfs file so far with the name hdmi_regs. Obviously, this is not going to work anymore when will have multiple HDMI controllers since we will end up trying to register two files with the same name. Let's use the variant to avoid that name conflict. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/9505c1eb40b3ef3709277bf9e8af77917b249c32.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Store the encoder type in the variant structureMaxime Ripard1-0/+3
The vc4 CRTC will use the encoder type to control its output clock muxing. However, this will be different from HDMI0 to HDMI1, so let's store our type in the variant structure so that we can support multiple controllers later on. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/2736a86b498551ba9dbc5803c5bb910627a2550c.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add a set_timings callbackMaxime Ripard1-0/+4
Similarly to the previous patches, the timings setup in the HDMI controller of the BCM2711 is slightly different, mostly because it supports higher resolutions and thus needed more spaces for the various timings, resulting in the register layout changing. Let's add a callback for that as well. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/0cfcbb379212f90b4abc76c0ccf3b90d1d7c0268.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add a CSC setup callbackMaxime Ripard1-0/+3
Similarly to the previous patches, the CSC setup is slightly different in the BCM2711 than in the previous generations. Let's add a callback for it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/5c19bbf10153cb42ca0fb67e08606c8295c17236.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add PHY RNG enable / disable functionMaxime Ripard1-0/+8
Let's continue the implementation of hooks for the parts that change in the BCM2711 SoC with the PHY RNG setup. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/216155f1c0b83e622ac60a2f7d00eb707de3acba.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add PHY init and disable functionMaxime Ripard1-0/+13
The HDMI PHY in the BCM2711 HDMI controller is significantly more complicated to setup than in the older BCM283x SoCs. Let's add hooks to enable and disable the PHY. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/7216826284dbc60a58bdacd662805d20699e5c80.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add reset callbackMaxime Ripard1-0/+3
The BCM2711 and BCM283x HDMI controllers use a slightly different reset sequence, so let's add a callback to reset the controller. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/a34bcb493da07eae58ed704f65e72ce0748e8952.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Implement a register layout abstractionMaxime Ripard1-5/+7
The HDMI controllers found in the BCM2711 have most of the registers reorganized in multiple registers areas and at different offsets than previously found. The logic however remains pretty much the same, so it doesn't really make sense to create a whole new driver and we should share the code as much as possible. Let's implement some indirection to wrap around a register and depending on the variant will lookup the associated register on that particular variant. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/3070236daff920e7edd11c5a72ac31fd0f6a656b.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Introduce resource init and variantMaxime Ripard1-0/+10
The HDMI controllers found in the BCM2711 has a pretty different clock and registers areas than found in the older BCM283x SoCs. Let's create a variant structure to store the various adjustments we'll need later on, and a function to get the resources needed for one particular version. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/71cfa3ce3d865bbab52a0e5651bc052dc4893f11.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Remove vc4_hdmi_connectorMaxime Ripard1-21/+2
The vc4_hdmi_connector was only used to switch between drm_connector to drm_encoder. However, we can now use vc4_hdmi to do the switch, so that structure is redundant. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/aee5120728db350b19c074de4290eafaf01e6671.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Retrieve the vc4_hdmi at unbind using our deviceMaxime Ripard1-2/+2
The unbind function needs to retrieve a vc4_hdmi structure pointer through the struct device that we're given since we want to support multiple HDMI controllers. However, our optional ASoC support doesn't make that trivial since it will overwrite the device drvdata if we use it, but obviously won't if we don't use it. Let's make sure the fields are at the proper offset to be able to cast between the snd_soc_card structure and the vc4_hdmi structure transparently so we can support both cases. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/717082cba06b5c06280f26c56c08aee512365ed3.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add container_of macros for encoders and connectorsMaxime Ripard1-0/+16
Whenever the code needs to access the vc4_hdmi structure from a DRM connector or encoder, it first accesses the drm_device associated to the connector, then retrieve the drm_dev private data which gives it a pointer to our vc4_dev, and will finally follow the vc4_hdmi pointer in that structure. That will also give us some trouble when having multiple controllers, but now that we have our encoder and connector structures that are part of vc4_hdmi, we can simply call container_of on the DRM connector or encoder and retrieve the vc4_hdmi structure directly. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/536ecce5898ea75839fa3788b876009d69a5ccae.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Move accessors to vc4_hdmiMaxime Ripard1-4/+4
The current driver only supports a single HDMI controller, and part of the issue is that the main vc4_dev structure holds a pointer to its (only) HDMI controller, and the HDMI registers accessors will use it to retrieve the mapped addresses. Let's modify those accessors to use directly the vc4_hdmi structure so that we can eventually get rid of that single global pointer. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/886b955586264ce078d7d35e9b8ef9ae51675c27.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: rework connectors and encodersMaxime Ripard1-32/+32
the vc4_hdmi driver has some custom structures to hold the data it needs to associate with the drm_encoder and drm_connector structures. However, it allocates them separately from the vc4_hdmi structure which makes it more complicated than it needs to be. Move those structures to be contained by vc4_hdmi and update the code accordingly. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/93b418d63c876355af2b3d3afebe31a256268623.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Move structure to headerMaxime Ripard1-0/+86
We will need to share the vc4_hdmi and related structures with multiple files, so let's create a header for it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/db3ff2babc914e38e86f794c4e49128697aed887.1599120059.git-series.maxime@cerno.tech
Powered by cgit, Gruvboxed by Blaster4385.