| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
tinydrm_display_pipe_init() has only one user now, so move it to mipi-dbi.
Changes:
- Remove drm_connector_helper_funcs.detect, it's always connected.
- Store the connector and mode in mipi_dbi instead of it's own struct.
Otherwise remove some leftover tinydrm-helpers.h inclusions.
Cc: Eric Anholt <[email protected]>
Cc: David Lechner <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This is only used by mipi-dbi drivers so move it there.
The reason this isn't moved to the SPI subsystem is that it will in a
later patch pass a dummy rx buffer for SPI controllers that need this.
Low memory boards (64MB) can run into a problem allocating such a "large"
contiguous buffer on every transfer after a long up time.
This leaves a very specific use case, so we'll keep the function here.
mipi-dbi will first go through a refactoring though, before this will
be done.
Remove SPI todo entry now that we're done with the tinydrm.ko SPI code.
v2: Drop moving the mipi_dbi_spi_init() declaration (Sam)
Cc: David Lechner <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Acked-by: : David Lechner <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Prep work before moving the function to mipi-dbi.
tinydrm_spi_transfer() was made to support one class of drivers in
drivers/staging/fbtft that has not been converted to DRM yet, so strip
away the unused functionality:
- Start byte (header) is not used.
- No driver relies on the automatic 16-bit byte swapping on little endian
machines with SPI controllers only supporting 8 bits per word.
Other changes:
- No need to initialize ret
- No need for the WARN since mipi-dbi only uses 8 and 16 bpw.
- Use spi_message_init_with_transfers()
Cc: David Lechner <[email protected]>
Acked-by: : David Lechner <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
spi-bcm2835 can handle >64kB buffers now so there is no need to check
->max_dma_len. The tinydrm_spi_max_transfer_size() max_len argument is
not used by any callers, so not needed.
Then we have the spi_max module parameter. It was added because
staging/fbtft has support for it and there was a report that someone used
it to set a small buffer size to avoid popping on a USB soundcard on a
Raspberry Pi. In hindsight it shouldn't have been added, I should have
waited for it to become a problem first. I don't know it anyone is
actually using it, but since tinydrm_spi_transfer() is being moved to
mipi-dbi, I'm taking the opportunity to remove it. I'll add it back to
mipi-dbi if someone complains.
With that out of the way, spi_max_transfer_size() can be used instead.
The chosen 16kB buffer size for Type C Option 1 (9-bit) interface is
somewhat arbitrary, but a bigger buffer will have a miniscule impact on
transfer speed, so it's probably fine.
Acked-by: Sam Ravnborg <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The SPI event tracing can dump the buffer now so no need for this.
Remove the debug print from tinydrm_spi_transfer() since this info can be
gleaned from the trace event.
Reviewed-by: Sam Ravnborg <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This means that tinydrm_spi_bpw_supported() can be removed.
Reviewed-by: Sam Ravnborg <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Also rename them from tinydrm_* to drm_fb_*
Pure code motion, no functional change.
Signed-off-by: Gerd Hoffmann <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Reviewed-by: Noralf Trønnes <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
No more users left so it can go alongside its helpers.
Update the tinydrm docs description and remove todo entry.
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
It's just a wrapper around drm_atomic_helper_shutdown() now.
Also store drm_device in the drvdata field, since that's what's used.
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rework function signature so tinydrm_device can be avoided.
Move definition to tinydrm-helpers.h so tinydrm.h can be deleted in a
later patch.
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Acked-by: Rodrigo Vivi <[email protected]>
Acked-by: Benjamin Gaignard <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Acked-by: Oleksandr Andrushchenko <[email protected]>
Acked-by: CK Hu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Liviu Dudau <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This switches to drm_atomic_helper_dirtyfb() as the framebuffer dirty
handler. All flushing will now happen in the pipe functions.
Also enable the damage plane property for all except repaper which can
only do full updates.
ili9225:
This change made ili9225_init() equal to mipi_dbi_init() so use it.
v3: Include vblank header (Sam)
ili9225 and st7586 can't use mipi_dbi_enable_flush() (David)
v2: Remove fb check in mipi_dbi_enable_flush() it can't be NULL
(kbuild test robot)
Cc: David Lechner <[email protected]>
Cc: Eric Anholt <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Tested-by: David Lechner <[email protected]>
Reviewed-by: David Lechner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This prepares for the switch to drm_atomic_helper_dirtyfb() in the next
patch. The damage helper returns a drm_rect so switch to that everywhere
including using a pointer in the dirty functions.
This is a non-functional change except for the debug print which looks a
bit different.
Signed-off-by: Noralf Trønnes <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
drmP.h was the only header file in the past and a lot
of files rely on that drmP.h defines everything.
The goal is to one day to delete drmP.h and
as a step towards this it will no longer be included in the
headers files in include/drm/
To prepare tinydrm/ for this add dependencies that
othwewise was pulled in by drmP.h from drm_gem_cma_helper.h
To avoid that tinydrm.h became "include everything",
push include files to the individual drivers.
Signed-off-by: Sam Ravnborg <[email protected]>
Acked-by: Noralf Trønnes <[email protected]>
Acked-by: David Lechner <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Eric Anholt <[email protected]>
Cc: Daniel Vetter <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The CMA helper now has the functionality to ensure a virtual address on
imported buffer so use that.
While touching all tinydrm drivers, remove the unnecessary inclusion of
drm_fb_helper.h in some drivers.
Cc: David Lechner <[email protected]>
Cc: Eric Anholt <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Acked-by: Christian König <[email protected]>
Reviewed-by: Eric Anholt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Without this, the xserver relies on what the 3D driver exposes and
assumes that the display can handle it, and then the DRM driver
happily tries to scan out a tiled format.
Signed-off-by: Eric Anholt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Noralf Trønnes <[email protected]>
|
|
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Make full use of the generic fbdev client.
Cc: David Lechner <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: David Lechner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There's nothing tinydrm specific to this, and there's a few more
copies of the same in various other drivers.
Signed-off-by: Daniel Vetter <[email protected]>
Cc: Gustavo Padovan <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: David Airlie <[email protected]>
Cc: David Lechner <[email protected]>
Cc: "Noralf Trønnes" <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Daniel Stone <[email protected]>
Cc: Haneen Mohammed <[email protected]>
Cc: Ben Widawsky <[email protected]>
Cc: "Ville Syrjälä" <[email protected]>
Reviewed-by: Oleksandr Andrushchenko <[email protected]>
Acked-by: David Lechner <[email protected]>
Reviewed-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
mipi_dbi_enable_flush() wants to call the fb->dirty() hook from the
bowels of the .atomic_enable() hook. That prevents us from taking the
plane mutex in fb->dirty() unless we also plumb down the acquire
context.
Instead it seems simpler to split the fb->dirty() into a tinydrm
specific lower level hook that can be called from
mipi_dbi_enable_flush() and from a generic higher level
tinydrm_fb_dirty() helper. As we don't have a tinydrm specific
vfuncs table we'll just stick it into tinydrm_device directly
for now.
v2: Deal with the fb->dirty() in tinydrm_display_pipe_update() as well (Noralf)
Cc: "Noralf Trønnes" <[email protected]>
Cc: David Lechner <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Reviewed-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Noralf Trønnes <[email protected]>
Tested-by: Noralf Trønnes <[email protected]>
|
|
tinydrm doesn't use dev->struct_mutex and therefore has no need to use
gem_free_object.
Signed-off-by: Daniel Vetter <[email protected]>
Cc: "Noralf Trønnes" <[email protected]>
Acked-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Remove tinydrm_of_find_backlight from tinydrm-helpers.c. We now have
a generic of_find_backlight defined in backlight.c. Let the callers
of tinydrm_of_find_backlight call of_find_backlight. Also, remove
select BACKLIGHT_LCD_SUPPORT and select BACKLIGHT_CLASS_DEVICE from
tinydrm/Kconfig as it is a hack that is no longer needed.
Reviewed-by: Noralf Trønnes <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Meghana Madhyastha <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/11dd1cabd098a730d07ab04c5987b139d14d8b21.1516810725.git.meghana.madhyastha@gmail.com
|
|
backlight_enable/disable
Remove tinydrm_enable/disable_backlight and let the callers call the
more generic backlight_enable/disable helpers
Reviewed-by: Noralf Trønnes <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Meghana Madhyastha <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/ec700724e47814e6426966e093bd32b2364ba147.1516810725.git.meghana.madhyastha@gmail.com
|
|
Embed the mode in tinydrm_connector instead of doing an devm_ allocation.
Remove unnecessary use of ret variable at the end of
tinydrm_display_pipe_init().
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: David Lechner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use drm_fb_cma_fbdev_init_with_funcs() and drm_fb_cma_fbdev_fini() which
relies on the fact that drm_device holds a pointer to the drm_fb_helper
structure. This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Remove todo entry.
Cc: David Lechner <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Acked-by: David Lechner <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Tested-by: David Lechner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Replace driver's code with the generic helpers that do the same thing.
Remove todo entry.
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Stefan Agner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Replace use of list_for_each with list_for_each_entry to simplify the
code and remove variables that are used only in list_for_each.
Done with following coccinelle patch:
@r@
identifier fn,i,f,p;
expression e;
iterator name list_for_each, list_for_each_entry;
type T;
@@
fn(...) {
++ T *i;
<+...
- list_for_each(p,e)
+ list_for_each_entry(i,e,f)
{
...
- T *i = list_entry(p,T,f);
...
}
...+>
}
@@
identifier r.fn,r.p;
@@
fn(...) {
...
- struct list_head *p;
... when != p
}
@@
identifier r.fn,r.i,r.f;
expression r.e;
statement S;
@@
fn(...) {
<...
list_for_each_entry(i,e,f)
- {
S
- }
...>
}
@s@
identifier i,f,p;
expression e;
type T;
@@
- list_for_each(p,e)
+ list_for_each_entry(i,e,f)
{
... when != T *i;
- i = list_entry(p,T,f);
...
}
@@
identifier s.p;
@@
- struct list_head *p;
... when != p
@@
identifier s.i,s.f;
expression s.e;
statement S;
@@
list_for_each_entry(i,e,f)
- {
S
- }
Signed-off-by: Harsha Sharma <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Since the driver is relying on the atomic helpers, remove the explicit
.best_encoder assignment and let the core call
drm_atomic_helper_best_encoder().
Signed-off-by: Haneen Mohammed <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010205858.GA4806@Haneen
|
|
Use drm_gem_framebuffer_helper directly instead of the cma
library wrappers.
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Eric Anholt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
While at it, also ocd and give them a consistent drm_dev_ prefix, like
the other device instance functionality. Plus move the functions into
the right places.
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This adds parameters for vaddr and clip to tinydrm_xrgb8888_to_gray8() to
make it more generic.
dma_buf_{begin,end}_cpu_access() are moved out to the repaper driver.
Return type is change to void to simplify error handling by callers.
Signed-off-by: David Lechner <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
It's dead code, the core handles all this directly now.
The only special case is nouveau and tda988x which used one function
for both legacy modeset code and -nv50 atomic world instead of 2
vtables. But amounts to exactly the same.
v2: Rebase over the panel/brideg refactorings in stm/ltdc.
Signed-off-by: Daniel Vetter <[email protected]>
Cc: Archit Taneja <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Peter Senna Tschudin <[email protected]>
Cc: Martin Donnelly <[email protected]>
Cc: Martyn Welch <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Inki Dae <[email protected]>
Cc: Joonyoung Shim <[email protected]>
Cc: Seung-Woo Kim <[email protected]>
Cc: Kyungmin Park <[email protected]>
Cc: Kukjin Kim <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Stefan Agner <[email protected]>
Cc: Alison Wang <[email protected]>
Cc: Russell King <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: CK Hu <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Carlo Caione <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Ben Skeggs <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Cc: Eric Anholt <[email protected]>
Cc: Mark Yao <[email protected]>
Cc: Heiko Stuebner <[email protected]>
Cc: Benjamin Gaignard <[email protected]>
Cc: Vincent Abriou <[email protected]>
Cc: Yannick Fertre <[email protected]>
Cc: Philippe Cornu <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Jonathan Hunter <[email protected]>
Cc: Jyri Sarha <[email protected]>
Cc: Gerd Hoffmann <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Sergei Shtylyov <[email protected]>
Cc: Jeffy Chen <[email protected]>
Cc: Tomeu Vizoso <[email protected]>
Cc: Yakir Yang <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: Romain Perier <[email protected]>
Cc: Kieran Bingham <[email protected]>
Cc: Xinliang Liu <[email protected]>
Cc: Alexey Brodkin <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: Rongrong Zou <[email protected]>
Cc: Rob Clark <[email protected]>
Cc: Hai Li <[email protected]>
Cc: "Noralf Trønnes" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: zain wang <[email protected]>
Cc: Baoyou Xie <[email protected]>
Cc: Boris Brezillon <[email protected]>
Reviewed-by: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Neil Armstrong <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Acked-by: Philipp Zabel <[email protected]>
Acked-by: Archit Taneja <[email protected]>
Tested-by: Philippe Cornu <[email protected]> (on stm)
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Shawn Guo <[email protected]>
Acked-by: Shawn Guo <[email protected]>
Acked-by: Noralf Trønnes <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
|
|
This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.
This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.
v2: A minor addition from Daniel
v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)
v4: Minor comment adjustments (Liviu)
v5: Some new platforms added due to rebase
v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)
Signed-off-by: Ben Widawsky <[email protected]>
Reviewed-by: Daniel Stone <[email protected]> (v2)
Reviewed-by: Liviu Dudau <[email protected]>
Signed-off-by: Daniel Stone <[email protected]>
|
|
Drm has no monochrome or greyscale support so add a conversion
from the common format XR24.
Also reorder includes into the common order.
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The trouble here is that it does multiple atomic commits under one
drm_modeset_lock_all, which breaks the behind-the-scenes acquire
context magic that function pulls off. It's much better to have one
overall atomic commit. That we still have multiple atomic commits
prevents us from adding some pretty useful debug checks to the atomic
machinery.
Hence it is really a bad idea to call the legacy
drm_crtc_force_disable_all() function. There's 2 atomic drivers using
this still, nouveau and tinydrm. To fix this, introduce a new
drm_atomic_helper_shutdown() by extracting the code from i915.
While at it improve kernel-doc and catch future offenders by
sprinkling a WARN_ON into the legacy function. We should probably move
those into the legacy modeset helpers, too ...
v2: Make it compile on arm drivers too (Noralf).
v3: Correct kerneldoc to point at _disable_all().
Reviewed-by: Maarten Lankhorst <[email protected]>
Acked-by: Noralf Trønnes <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Noralf Trønnes <[email protected]>
Cc: Ben Skeggs <[email protected]>
Tested-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
drm_driver.fops can't be shared since the owner then becomes tinydrm.ko.
Move the fops declaration to the driver.
v2: Use DEFINE_DRM_GEM_CMA_FOPS
Reported-by: Daniel Vetter <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c:454:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Signed-off-by: Fengguang Wu <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/20170223164647.GA2519@lkp-ws02
|
|
Add common functionality needed by many tinydrm drivers.
Signed-off-by: Noralf Trønnes <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Acked-by: Thierry Reding <[email protected]>
|
|
tinydrm provides helpers for very simple displays that can use
CMA backed framebuffers and need flushing on changes.
Signed-off-by: Noralf Trønnes <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Acked-by: Thierry Reding <[email protected]>
|