| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add support for the drm_panic infrastructure, which allows to display
a user friendly message on the screen when a Linux kernel panic occurs.
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Reviewed-by: Aradhya Bhatia <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When the driver sets up the zpos property it sets the default zpos value
to the HW id of the plane. That is fine as such, but as on many DSS
versions the driver arranges the DRM planes in a different order than
the HW planes (to keep the non-scalable planes first), this leads to odd
initial zpos values. An example is J721e, where the initial zpos values
for DRM planes are 1, 3, 0, 2.
In theory the userspace should configure the zpos values properly when
using multiple planes, and in that sense the initial zpos values
shouldn't matter, but there's really no reason not to fix this and help
the userspace apps which don't handle zpos perfectly. In particular,
some versions of Weston seem to have issues dealing with the planes
with the current default zpos values.
So let's change the zpos values for the DRM planes to 0, 1, 2, 3.
Another option would be to configure the planes marked as primary planes
to zpos 0. On a two display system this would give us plane zpos values
of 0, 0, 1, 2. The end result and behavior would be very similar in this
option, and I'm not aware that this would actually help us in any way.
So, to keep the code simple, I opted for the 0, 1, 2, 3 values.
Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Reviewed-by: Aradhya Bhatia <[email protected]>
Signed-off-by: Tomi Valkeinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As of commit a01cb8ba3f628293 ("drm: Move drm_plane_helper_check_state()
into drm_atomic_helper.c"), drm_plane_helper_check_state() no longer
exists, but is part of drm_atomic_helper_check_plane_state().
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/8bb42a92fc20e3d11e5847e7f15a47c687b73104.1689779916.git.geert+renesas@glider.be
|
|
Enable the primary plane for tidss hardware via atomic_enable.
Atomic helpers invoke this callback only when the plane becomes
active.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Tomi Valkeinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Calls to dispc_plane_setup() and dispc_plane_enable() cannot fail.
Remove the return value.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Tomi Valkeinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Several source files include drm_crtc_helper.h without needing it or
only to get its transitive include statements; leading to unnecessary
compile-time dependencies.
Directly include required headers and drop drm_crtc_helper.h where
possible.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Quite a lot of drivers include the drm_fb_cma_helper.h header file
without actually making use of it's provided API, hence remove those
includes.
Suggested-by: Sam Ravnborg <[email protected]>
Signed-off-by: Danilo Krummrich <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
drm_crtc.h has no need for drm_blend.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_blend.h.
Quite a few placs do currently depend on drm_blend.h without
actually including it directly. All of those need to be fixed
up.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Sam Ravnborg <[email protected]>
Acked-by: Jani Nikula <[email protected]>
|
|
drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.
Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.
v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Sam Ravnborg <[email protected]>
Acked-by: Jani Nikula <[email protected]>
|
|
No need to set it explicitly.
Acked-by: Philipp Zabel <[email protected]>
Acked-by: Heiko Stuebner <[email protected]>
Acked-by: Paul Cercueil <[email protected]>
Acked-by: Jernej Skrabec <[email protected]>
Acked-by: Chun-Kuang Hu <[email protected]>
Acked-by: Martin Blumenstingl <[email protected]>
Acked-by: Tomi Valkeinen <[email protected]>
Acked-by: Philippe Cornu <[email protected]>
Acked-by: Lucas Stach <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Cc: Laurentiu Palcu <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: Paul Cercueil <[email protected]>
Cc: Chun-Kuang Hu <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Jerome Brunet <[email protected]>
Cc: Martin Blumenstingl <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Stefan Agner <[email protected]>
Cc: Sandy Huang <[email protected]>
Cc: "Heiko Stübner" <[email protected]>
Cc: Yannick Fertre <[email protected]>
Cc: Philippe Cornu <[email protected]>
Cc: Benjamin Gaignard <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: Jernej Skrabec <[email protected]>
Cc: Jyri Sarha <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_update or atomic_disable hooks,
which would be the new plane state in the global atomic state since
_swap_state happened when those hooks are run.
Use the drm_atomic_get_new_plane_state helper to get that state to make it
more obvious.
This was made using the coccinelle script below:
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)
@ adds_new_state @
identifier plane_atomic_func.func;
identifier plane, state;
identifier new_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state)
{
...
- struct drm_plane_state *new_state = plane->state;
+ struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.
The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.
Let's convert the remaining helpers to provide a consistent interface,
this time with the planes atomic_update and atomic_disable.
The conversion was done using the coccinelle script below, built tested on
all the drivers.
@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
void (*atomic_update)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}
@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
void (*atomic_disable)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
)
@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier crtc_state;
identifier plane, plane_state, state;
expression e;
@@
f(struct drm_crtc_state *crtc_state)
{
...
struct drm_atomic_state *state = e;
<+...
(
- FUNCS->atomic_disable(plane, plane_state)
+ FUNCS->atomic_disable(plane, state)
|
- FUNCS->atomic_update(plane, plane_state)
+ FUNCS->atomic_update(plane, state)
)
...+>
}
@@
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *state)
+ struct drm_plane_state *old_plane_state)
{
<...
- state
+ old_plane_state
...>
}
@ ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, old_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
... when != old_state
}
@ adds_old_state depends on plane_atomic_func && !ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *plane_state)
{
+ struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
...
}
@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *plane_state
+ struct drm_atomic_state *state
)
{ ... }
@ include depends on adds_old_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_old_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
<+...
- plane_state->state
+ state
...+>
}
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Some drivers are storing the plane->state pointer in atomic_update and
atomic_disable in a variable simply called state, while the state passed
as an argument is called old_state.
In order to ease subsequent reworks and to avoid confusing or
inconsistent names, let's rename those variables to new_state.
This was done using the following coccinelle script, plus some manual
changes for mtk and tegra.
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)
@ moves_new_state_old_state @
identifier plane_atomic_func.func;
identifier plane;
symbol old_state;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
...
- struct drm_plane_state *state = plane->state;
+ struct drm_plane_state *new_state = plane->state;
...
}
@ depends on moves_new_state_old_state @
identifier plane_atomic_func.func;
identifier plane;
identifier old_state;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
<...
- state
+ new_state
...>
}
@ moves_new_state_oldstate @
identifier plane_atomic_func.func;
identifier plane;
symbol oldstate;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *oldstate)
{
...
- struct drm_plane_state *state = plane->state;
+ struct drm_plane_state *newstate = plane->state;
...
}
@ depends on moves_new_state_oldstate @
identifier plane_atomic_func.func;
identifier plane;
identifier old_state;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
<...
- state
+ newstate
...>
}
@ moves_new_state_old_pstate @
identifier plane_atomic_func.func;
identifier plane;
symbol old_pstate;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_pstate)
{
...
- struct drm_plane_state *state = plane->state;
+ struct drm_plane_state *new_pstate = plane->state;
...
}
@ depends on moves_new_state_old_pstate @
identifier plane_atomic_func.func;
identifier plane;
identifier old_pstate;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_pstate)
{
<...
- state
+ new_pstate
...>
}
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Now that atomic_check takes the global atomic state as a parameter, we
don't need to go through the pointer in the plane state.
This was done using the following coccinelle script:
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
static struct drm_plane_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};
@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
- struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
<... when != plane_state
- plane_state->state
+ state
...>
}
@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
<...
- plane_state->state
+ state
...>
}
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.
The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.
Let's convert all the remaining helpers to provide a consistent
interface, starting with the planes atomic_check.
The conversion was done using the coccinelle script below plus some
manual changes for vmwgfx, built tested on all the drivers.
@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
int (*atomic_check)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};
@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@
f(struct drm_device *dev, struct drm_atomic_state *state)
{
<+...
- FUNCS->atomic_check(plane, plane_state)
+ FUNCS->atomic_check(plane, state)
...+>
}
@ ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
... when != new_plane_state
}
@ adds_new_state depends on plane_atomic_func && !ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
+ struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *new_plane_state
+ struct drm_atomic_state *state
)
{ ... }
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Most drivers call the argument to the plane atomic_check hook simply
state, which is going to conflict with the global atomic state in a
later rework. Let's rename it to new_plane_state (or new_state depending
on the convention used in the driver).
This was done using the coccinelle script below, and built tested:
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
static const struct drm_plane_helper_funcs helpers = {
.atomic_check = func,
};
@ has_old_state @
identifier plane_atomic_func.func;
identifier plane;
expression e;
symbol old_state;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *state)
{
...
struct drm_plane_state *old_state = e;
...
}
@ depends on has_old_state @
identifier plane_atomic_func.func;
identifier plane;
symbol old_state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *state
+ struct drm_plane_state *new_state
)
{
<+...
- state
+ new_state
...+>
}
@ has_state @
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *state)
{
...
}
@ depends on has_state @
identifier plane_atomic_func.func;
identifier plane;
symbol old_state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *state
+ struct drm_plane_state *new_plane_state
)
{
<+...
- state
+ new_plane_state
...+>
}
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting,
but currently located next to framebuffer helpers. Move it to GEM atomic
helpers, rename it slightly and adopt the drivers. Same for the rsp
simple-pipe helper.
Compile-tested with x86-64, aarch64 and arm. The patch is fairly large,
but there are no functional changes.
v3:
* remove out-comented line in drm_gem_framebuffer_helper.h
(Maxime)
v2:
* rename to drm_gem_plane_helper_prepare_fb() (Daniel)
* add tutorial-style documentation
Signed-off-by: Thomas Zimmermann <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
drm_gem_fb_prepare_fb() extracts fence and attaches to plane state.
The fence info is needed if implicit fencing is used. Add this as
prepare_fb function pointer to plane helper funcs.
Signed-off-by: Gowtham Tammana <[email protected]>
Signed-off-by: Tomi Valkeinen <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <[email protected]>
Acked-by: Jyri Sarha <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- Core DRM had a lot of refactoring around managed drm resources to
make drivers simpler.
- Intel Tigerlake support is on by default
- amdgpu now support p2p PCI buffer sharing and encrypted GPU memory
Details:
core:
- uapi: error out EBUSY when existing master
- uapi: rework SET/DROP MASTER permission handling
- remove drm_pci.h
- drm_pci* are now legacy
- introduced managed DRM resources
- subclassing support for drm_framebuffer
- simple encoder helper
- edid improvements
- vblank + writeback documentation improved
- drm/mm - optimise tree searches
- port drivers to use devm_drm_dev_alloc
dma-buf:
- add flag for p2p buffer support
mst:
- ACT timeout improvements
- remove drm_dp_mst_has_audio
- don't use 2nd TX slot - spec recommends against it
bridge:
- dw-hdmi various improvements
- chrontel ch7033 support
- fix stack issues with old gcc
hdmi:
- add unpack function for drm infoframe
fbdev:
- misc fbdev driver fixes
i915:
- uapi: global sseu pinning
- uapi: OA buffer polling
- uapi: remove generated perf code
- uapi: per-engine default property values in sysfs
- Tigerlake GEN12 enabled.
- Lots of gem refactoring
- Tigerlake enablement patches
- move to drm_device logging
- Icelake gamma HW readout
- push MST link retrain to hotplug work
- bandwidth atomic helpers
- ICL fixes
- RPS/GT refactoring
- Cherryview full-ppgtt support
- i915 locking guidelines documented
- require linear fb stride to be 512 multiple on gen9
- Tigerlake SAGV support
amdgpu:
- uapi: encrypted GPU memory handling
- uapi: add MEM_SYNC IB flag
- p2p dma-buf support
- export VRAM dma-bufs
- FRU chip access support
- RAS/SR-IOV updates
- Powerplay locking fixes
- VCN DPG (powergating) enablement
- GFX10 clockgating fixes
- DC fixes
- GPU reset fixes
- navi SDMA fix
- expose FP16 for modesetting
- DP 1.4 compliance fixes
- gfx10 soft recovery
- Improved Critical Thermal Faults handling
- resizable BAR on gmc10
amdkfd:
- uapi: GWS resource management
- track GPU memory per process
- report PCI domain in topology
radeon:
- safe reg list generator fixes
nouveau:
- HD audio fixes on recent systems
- vGPU detection (fail probe if we're on one, for now)
- Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it)
- SVM improvements/fixes
- NVIDIA format modifier support
- Misc other fixes.
adv7511:
- HDMI SPDIF support
ast:
- allocate crtc state size
- fix double assignment
- fix suspend
bochs:
- drop connector register
cirrus:
- move to tiny drivers.
exynos:
- fix imported dma-buf mapping
- enable runtime PM
- fixes and cleanups
mediatek:
- DPI pin mode swap
- config mipi_tx current/impedance
lima:
- devfreq + cooling device support
- task handling improvements
- runtime PM support
pl111:
- vexpress init improvements
- fix module auto-load
rcar-du:
- DT bindings conversion to YAML
- Planes zpos sanity check and fix
- MAINTAINERS entry for LVDS panel driver
mcde:
- fix return value
mgag200:
- use managed config init
stm:
- read endpoints from DT
vboxvideo:
- use PCI managed functions
- drop WC mtrr
vkms:
- enable cursor by default
rockchip:
- afbc support
virtio:
- various cleanups
qxl:
- fix cursor notify port
hisilicon:
- 128-byte stride alignment fix
sun4i:
- improved format handling"
* tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits)
drm/amd/display: Fix potential integer wraparound resulting in a hang
drm/amd/display: drop cursor position check in atomic test
drm/amdgpu: fix device attribute node create failed with multi gpu
drm/nouveau: use correct conflicting framebuffer API
drm/vblank: Fix -Wformat compile warnings on some arches
drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode
drm/amd/display: Handle GPU reset for DC block
drm/amdgpu: add apu flags (v2)
drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven
drm/amdgpu: fix pm sysfs node handling (v2)
drm/amdgpu: move gpu_info parsing after common early init
drm/amdgpu: move discovery gfx config fetching
drm/nouveau/dispnv50: fix runtime pm imbalance on error
drm/nouveau: fix runtime pm imbalance on error
drm/nouveau: fix runtime pm imbalance on error
drm/nouveau/debugfs: fix runtime pm imbalance on error
drm/nouveau/nouveau/hmm: fix migrate zero page to GPU
drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations
drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST
drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes()
...
|
|
Upcasting using a container_of macro is more typesafe, faster and
easier for the compiler to optimize.
Tested-by: Jyri Sarha <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Reviewed-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Cc: Jyri Sarha <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
tidss uses devm_kzalloc to allocate DRM plane, encoder and crtc objects.
This is not correct as the lifetime of those objects should be longer
than the underlying device's.
When unloading tidss module, the devm_kzalloc'ed objects have already
been freed when tidss_release() is called, and the driver will accesses
freed memory possibly causing a crash, a kernel WARN, or other undefined
behavior, and also KASAN will give a bug.
Signed-off-by: Tomi Valkeinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Daniel Vetter <[email protected]>
|
|
This patch adds a new DRM driver for Texas Instruments DSS IPs used on
Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is
a major change to the older DSS IP versions, which are supported by
the omapdrm driver. While on higher level the Keystone DSS resembles
the older DSS versions, the registers are completely different and the
internal pipelines differ a lot.
DSS IP found on K2G is an "ultra-light" version, and has only a single
plane and a single output. The K3 DSS IPs are found on AM65x and J721E
SoCs. AM65x DSS has two video ports, one full video plane, and another
"lite" plane without scaling support. J721E has 4 video ports, 2 video
planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS)
output.
Version history:
v2: - rebased on top of drm-next-2019-11-27
- sort all include lines in all files
- remove all include <drm/drmP.h>
- remove select "select VIDEOMODE_HELPERS"
- call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no
to call it in new modeset case as it is also called in vp_enable())
- change probe sequence and drm_device allocation (follow example in
drm_drv.c)
- use __maybe_unused instead of #ifdef for pm functions
- remove "struct drm_fbdev_cma *fbdev;" from driver data
- check panel connector type before connecting it
v3: no change
v4: no change
v5: - remove fifo underflow irq handling, it is not an error and
it should be used for debug purposes only
- memory tuning, prefetch plane fifo up to high-threshold value to
minimize possibility of underflows.
v6: - Check CTM and gamma support from dispc_features when creating crtc
- Implement CTM support for k2g and fix k3 CTM implementation
- Remove gamma property persistence and always write color properties
in a new modeset
v7: - Fix checkpatch.pl --strict issues
- Rebase on top of drm-misc-next-2020-01-10
v8: - Remove idle debug prints from dispc_init()
- Add Reviewed-by: Benoit Parrot <[email protected]>
v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid
conflict exported omapfb function with same name
- Add Signed-off-by: Tomi Valkeinen <[email protected]>
Co-developed-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Jyri Sarha <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Reviewed-by: Benoit Parrot <[email protected]>
Signed-off-by: Tomi Valkeinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/925fbfad58ff828e8e07fdff7073a0ee65750c3d.1580129724.git.jsarha@ti.com
|