| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In mtk_crtc_create(), if the call to mbox_request_channel() fails then we
set the "mtk_crtc->cmdq_client.chan" pointer to NULL. In that situation,
we do not call cmdq_pkt_create().
During the cleanup, we need to check if the "mtk_crtc->cmdq_client.chan"
is NULL first before calling cmdq_pkt_destroy(). Calling
cmdq_pkt_destroy() is unnecessary if we didn't call cmdq_pkt_create() and
it will result in a NULL pointer dereference.
Fixes: 7627122fd1c0 ("drm/mediatek: Add cmdq_handle in mtk_crtc")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Update efuse data for MT8188 displayport.
The DP monitor can not display when DUT connected to USB-c to DP dongle.
Analysis view is invalid DP efuse data.
Fixes: 350c3fe907fb ("drm/mediatek: dp: Add support MT8188 dp/edp function")
Reviewed-by: Matthias Brugger <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Liankun Yang <[email protected]>
Reviewed-by: Fei Shao <[email protected]>
Tested-by: Fei Shao <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
In commit 9f428b95ac89 ("drm/mediatek: Add new color format MACROs in
OVL"), some new color formats are defined in the MACROs to make the
switch statement more concise. That commit was intended to be a no-op
cleanup. However, there are typos in these formats MACROs, which cause
the return value to be incorrect. Fix the typos to ensure the return
value remains unchanged.
Fixes: 9f428b95ac89 ("drm/mediatek: Add new color format MACROs in OVL")
Reviewed-by: Douglas Anderson <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Signed-off-by: Hsin-Te Yuan <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Since some SoCs support premultiplied pixel formats but some do not,
the blend_modes parameter is added to mtk_plane_init(), which is
obtained from the mtk_ddp_comp_get_blend_modes function implemented
in different blending supported components.
The blending supported components can use driver data to set the
blend mode capabilities for different SoCs.
Signed-off-by: Jason-JH.Lin <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
OVL_CON_CLRFMT_MAN is a configuration for extending color format
settings of DISP_REG_OVL_CON(n).
It will change some of the original color format settings.
Take the settings of (3 << 12) for example.
- If OVL_CON_CLRFMT_MAN = 0 means OVL_CON_CLRFMT_RGBA8888.
- If OVL_CON_CLRFMT_MAN = 1 means OVL_CON_CLRFMT_PARGB8888.
Since previous SoCs did not support OVL_CON_CLRFMT_MAN, this means
that the SoC does not support the premultiplied color format.
It will break the original color format setting of MT8173.
Therefore, the blend_modes is added to the driver data and then
mtk_ovl_fmt_convert() will check the blend_modes to see if
pre-multiplied is supported in the current platform.
If it is not supported, use coverage mode to set it to the supported
color formats to solve the degradation problem.
Fixes: a3f7f7ef4bfe ("drm/mediatek: Support "Pre-multiplied" blending in OVL")
Signed-off-by: Jason-JH.Lin <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Since we changed MACROs to be consistent with DRM input color format
naming, the comment for ovl_fmt_conver() is no longer needed.
Fixes: 9f428b95ac89 ("drm/mediatek: Add new color format MACROs in OVL")
Signed-off-by: Jason-JH.Lin <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Refine the comment for ignore_pixel_alpha flag and move it to
if(state->fb) statement to make it less conditional.
Signed-off-by: Jason-JH.Lin <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
OVL_CON_AEN is for alpha blending enable.
For the SoC that is supported the blend_modes, OVL_CON_AEN will always
enabled to use constant alpha and then use the ignore_pixel_alpha bit
to do the alpha blending for XRGB8888 format.
Note that ignore pixel alpha bit is not supported if the SoC is not
supported the blend_modes.
So it will break the original setting of XRGB8888 format for the
blend_modes unsupported SoCs, such as MT8173.
To fix the downgrade issue, enable alpha blending only when a valid
blend_mode or has_alpha is set.
Fixes: bc46eb5d5d77 ("drm/mediatek: Support DRM plane alpha in OVL")
Signed-off-by: Jason-JH.Lin <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
|
|
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.12
1. Support alpha blending
2. Remove cl in struct cmdq_pkt
3. Fixup for ovl adaptor
4. Declare Z Position for all planes
5. Drop unnecessary check for property presence
6. Add dsi per-frame lp code for mt8188
7. Fix missing configuration flags in mtk_crtc_ddp_config()
8. Use spin_lock_irqsave() for CRTC event lock
9. Add power domain binding to the mediatek DPI controller
Signed-off-by: Dave Airlie <[email protected]>
From: Chun-Kuang Hu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A zpos normalization fix for komeda, a register bitmask fix for nouveau,
a memory leak fix for imagination, three fixes for the recent bridge
HDMI work, a potential DoS fix and a cache coherency for panthor, a
change of panel compatible and a deferred-io fix when used with
non-highmem memory.
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905-original-radical-guan-e7a2ae@houat
|
|
drm_bridge_connector is a "leaf" driver, belonging to the display
helper, rather than the "CRTC" drm_kms_helper module. Move the driver
to the drm/display and add necessary Kconfig selection clauses.
Suggested-by: Maxime Ripard <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Use the state-aware spin_lock_irqsave() and spin_unlock_irqrestore()
to avoid unconditionally re-enabling the local interrupts.
Fixes: 411f5c1eacfe ("drm/mediatek: handle events when enabling/disabling crtc")
Signed-off-by: Fei Shao <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
In mtk_crtc_ddp_config(), mtk_crtc will use some configuration flags to
generate instructions to cmdq_handle, such as:
state->pending_config
mtk_crtc->pending_planes
plane_state->pending.config
mtk_crtc->pending_async_planes
plane_state->pending.async_config
These configuration flags may be set to false when a GCE IRQ comes calling
ddp_cmdq_cb(). This may result in missing prepare instructions,
especially if mtk_crtc_update_config() with the flase need_vblank (no need
to wait for vblank) cases.
Therefore, the mtk_crtc->config_updating flag is set at the beginning of
mtk_crtc_update_config() to ensure that these configuration flags won't be
changed when the mtk_crtc_ddp_config() is preparing instructions.
But somehow the ddp_cmdq_cb() didn't use the mtk_crtc->config_updating
flag to prevent those pending config flags from being cleared.
To avoid missing the configuration when generating the config instruction,
the config_updating flag should be added into ddp_cmdq_cb() and be
protected with spin_lock.
Fixes: 7f82d9c43879 ("drm/mediatek: Clear pending flag when cmdq packet is done")
Signed-off-by: Jason-JH.Lin <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Reviewed-by: Fei Shao <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Adding the per-frame lp function of mt8188, which can keep HFP in HS and
reduce the time required for each line to enter and exit low power.
Per Frame LP:
|<----------One Active Frame-------->|
--______________________________________----___________________
^HSA+HBP^^RGB^^HFP^^HSA+HBP^^RGB^^HFP^ ^HSA+HBP^^RGB^^HFP^
Per Line LP:
|<---------------One Active Frame----------->|
--______________--______________--______________----______________
^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^ ^HSA+HBP^^RGB^
Signed-off-by: Shuijing Li <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
of_property_read_u32() returns -EINVAL if a property is not present, so
the preceding check for presence with of_find_property() can be
dropped. Really, what the errno is shouldn't matter. Either the property
can be read and used or it can't and is ignored.
This is part of a larger effort to remove callers of of_find_property()
and similar functions. of_find_property() leaks the DT struct property
and data pointers which is a problem for dynamically allocated nodes
which may be freed.
Signed-off-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
MediaTek SoCs support multiple planes, one of which is the primary
and all the others are overlays (and CURSOR is the last overlay).
In all currently supported SoCs, the Z order of the overlays can't
be changed with any fast muxing action, and can only be changed by
swapping the contents of the entire register set of one overlay
with the other to internally reorder the layer properties, which
is indeed feasible, but probably more expensive than desired.
Declare the Z position for all planes with an immutable property
at least for now, so that the userspace can take its decisions
accordingly.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Fei Shao <[email protected]>
Acked-by: Daniel Stone <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Acked-by: Ulf Hansson <[email protected]> # For MMC
|
|
In order to avoid potential memory leaks if new error paths are added
without a call to of_node_put(), use for_each_child_of_node_scoped()
instead of for_each_child_of_node(). The former automatically decrements
the refcount when the child goes out of scope, which removes the need
for explicit calls to of_node_put().
Signed-off-by: Javier Carrasco <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Error paths that exit for_each_child_of_node() need to call
of_node_put() to decerement the child refcount and avoid memory leaks.
Add the missing of_node_put().
Cc: [email protected]
Fixes: 453c3364632a ("drm/mediatek: Add ovl_adaptor support for MT8195")
Signed-off-by: Javier Carrasco <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
None of the elements from that header is used in this file.
Signed-off-by: Javier Carrasco <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Use cmdq_pkt_create() and cmdq_pkt_destroy() common function
instead of implementing drm version.
Signed-off-by: Chun-Kuang Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
|
|
For some client driver, it want to reduce latency between excuting
previous packet command and next packet command, so append jump
command to the end of previous packet and the jump destination
address is the start address of next packet command buffer. Before
next packet exist, the previous packet has no information of where
to jump to, so append nop command first. When next packet exist,
change nop command to jump command. For mediatek drm driver, it
never has next packet, so appending nop command is redundant.
Because cmdq_pkt_finalize() would append nop command, so change
calling cmdq_pkt_finalize() to cmdq_pkt_eoc() to prevent append
redundant nop command.
Signed-off-by: Chun-Kuang Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
|
|
Hardware-speaking, there is no feature-reduced cursor specific
plane, so this driver reserves the last all Overlay plane as a
Cursor plane, but sets the maximum cursor width/height to the
maximum value that the full overlay plane can use.
While this could be ok, it raises issues with common userspace
using libdrm (especially Mutter, but other compositors too) which
will crash upon performing allocations and/or using said cursor
plane.
Reduce the maximum width/height for the cursor to 512x512 pixels,
value taken from IGT's maximum cursor size test, which succeeds.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Fei Shao <[email protected]>
Tested-by: Fei Shao <[email protected]>
Reviewed-by: Daniel Stone <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Support "Pre-multiplied" and "None" blend mode on MediaTek's chips by
adding correct blend mode property when the planes init.
Before this patch, only the "Coverage" mode (default) is supported.
For more information, there are three pixel blend modes in DRM driver:
"None", "Pre-multiplied", and "Coverage".
To understand the difference between these modes, let's take a look at
the following two approaches to do alpha blending:
1. Straight:
dst.RGB = src.RGB * src.A + dst.RGB * (1 - src.A)
This is straightforward and easy to understand, when the source layer is
compositing with the destination layer, it's alpha will affect the
result. This is also known as "post-multiplied", or "Coverage" mode.
2. Pre-multiplied:
dst.RGB = src.RGB + dst.RGB * (1 - src.A)
Since the source RGB have already multiplied its alpha, only destination
RGB need to multiply it. This is the "Pre-multiplied" mode in DRM.
For the "None" blend mode in DRM, it means the pixel alpha is ignored
when compositing the layers, only the constant alpha for the composited
layer will take effects.
Reviewed-by: CK Hu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Hsiao Chien Sung <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Support "Pre-multiplied" alpha blending mode in Mixer.
Before this patch, only the coverage mode is supported.
To replace the default setting that is set in mtk_ethdr_config(),
we change mtk_ddp_write_mask() to mtk_ddp_write(), and this change will
also reset the NON_PREMULTI_SOURCE bit that was assigned in
mtk_ethdr_config(). Therefore, we must still set NON_PREMULTI_SOURCE bit
if the blend mode is not DRM_MODE_BLEND_PREMULTI.
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Hsiao Chien Sung <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Support "Pre-multiplied" alpha blending mode on in OVL.
Before this patch, only the "coverage" mode is supported.
As whether OVL_CON_CLRFMT_MAN bit is enabled, (3 << 12)
means different formats in the datasheet. To prevent
misunderstandings going forward, instead of reusing
OVL_CON_CLRFMT_RGBA8888, we intetionally defined
OVL_CON_CLRFMT_PARGB8888 with bit operation again.
Reviewed-by: CK Hu <[email protected]>
Signed-off-by: Hsiao Chien Sung <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Support "None" alpha blending mode on MediaTek's chips.
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Hsiao Chien Sung <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Support "None" alpha blending mode on MediaTek's chips.
Reviewed-by: CK Hu <[email protected]>
Signed-off-by: Hsiao Chien Sung <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.11
1. Convert to platform remove callback returning void
2. Drop chain_mode_fixup call in mode_valid()
3. Fixes the errors of MediaTek display driver found by IGT.
4. Add display support for the MT8365-EVK board
5. Fix bit depth overwritten for mtk_ovl_set bit_depth()
6. Remove less-than-zero comparison of an unsigned value
7. Call drm_atomic_helper_shutdown() at shutdown time
8. Log errors in probe with dev_err_probe()
9. Fix possible_crtcs calculation
10. Fix spurious kfree()
Signed-off-by: Daniel Vetter <[email protected]>
From: Chun-Kuang Hu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.
Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.
Signed-off-by: Daniel Vetter <[email protected]>
|
|
drm_edid_to_sad() might return an error or just zero. If that is the
case, we must not free the SADs because there was no allocation in
the first place.
Fixes: dab12fa8d2bd ("drm/mediatek/dp: fix memory leak on ->get_edid callback audio detection")
Signed-off-by: Michael Walle <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
mtk_find_possible_crtcs() assumes that the main path will always have
the CRTC with id 0, the ext id 1 and the third id 2. This is only true
if the paths are all available. But paths are optional (see also
comment in mtk_drm_kms_init()), e.g. the main path might not be enabled
or available at all. Then the CRTC IDs will shift one up, e.g. ext will
be 0 and the third path will be 1.
To fix that, dynamically calculate the IDs by the presence of the paths.
While at it, make the return code a signed one and return -ENODEV if no
path is found and handle the error in the callers.
Fixes: 5aa8e7647676 ("drm/mediatek: dpi/dsi: Change the getting possible_crtc way")
Suggested-by: Nícolas F. R. A. Prado <[email protected]>
Signed-off-by: Michael Walle <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Use dev_err_probe() to log errors in the probe function of all drm
mediatek drivers. This avoids -EPROBE_DEFER return values from being
logged as errors, like the following:
mediatek-disp-rdma 1c002000.rdma: Failed to add component: -517
As a side benefit it also standardizes the format of the error in the
log messages.
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240606-mtk-disp-rdma-dev-err-probe-v2-1-3898621767b8@collabora.com/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.
This driver users the component model and shutdown happens in the base
driver. The "drvdata" for this driver will always be valid if
shutdown() is called and as of commit 2a073968289d
("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a noop")
we don't need to confirm that "drm" is non-NULL.
Suggested-by: Maxime Ripard <[email protected]>
Reviewed-by: Maxime Ripard <[email protected]>
Reviewed-by: Fei Shao <[email protected]>
Tested-by: Fei Shao <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240611102744.v2.1.I2b014f90afc4729b6ecc7b5ddd1f6dedcea4625b@changeid/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Fix a Coverity error that less-than-zero comparison of an unsigned value
is never true.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Refine the value and mask define of bit depth for mtk_ovl_set bit_depth().
Use cmdq_pkt_write_mask() instead of cmdq_pkt_write() to avoid bit depth
settings being overwritten.
Fixes: fb36c5020c9c ("drm/mediatek: Add support for AR30 and BA30 overlays")
Signed-off-by: Jason-JH.Lin <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
With the recent switch from fbdev-generic to fbdev-dma, the driver now
requires the DRM GEM DMA helpers. This dependency is missing, and will
cause a link failure if fbdev emulation is enabled.
Add the missing dependency.
Fixes: 0992284b4fe4 ("drm/mediatek: Use fbdev-dma")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Acked-by: Chun-Kuang Hu <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Set the plane alpha according to DRM plane property.
Reviewed-by: CK Hu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Set the plane alpha according to DRM plane property.
Reviewed-by: CK Hu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Support RGBA8888 and RGBX8888 formats in OVL on MT8195.
Reviewed-by: CK Hu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Support more 10bit formats in OVL.
Reviewed-by: CK Hu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Hsiao Chien Sung <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Set DRM mode configs limitation according to the hardware capabilities
and pass the IGT checks as below:
- The test "graphics.IgtKms.kms_plane" requires a frame buffer with
width of 4512 pixels (> 4096).
- The test "graphics.IgtKms.kms_cursor_crc" checks if the cursor size is
defined, and run the test with cursor size from 1x1 to 512x512.
Please notice that the test conditions may change as IGT is updated.
Reviewed-by: CK Hu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Define new color formats to hide the bit operation in the MACROs to make
the switch statement more concise.
Change the MACROs to align the naming rule in DRM.
Reviewed-by: CK Hu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Hsiao Chien Sung <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Always add DRM_MODE_ROTATE_0 to rotation property to meet
IGT's (Intel GPU Tools) requirement.
Reviewed-by: CK Hu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Add OVL compatible name for MT8195.
Without this commit, DRM won't work after modifying the device tree.
Reviewed-by: CK Hu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
We found that IGT (Intel GPU Tool) will try to commit layers with
zero width or height and lead to undefined behaviors in hardware.
Disable the layers in such a situation.
Fixes: 453c3364632a ("drm/mediatek: Add ovl_adaptor support for MT8195")
Fixes: d886c0009bd0 ("drm/mediatek: Add ETHDR support for MT8195")
Reviewed-by: CK Hu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsiao Chien Sung <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
The formula of Coverage alpha blending is:
dst.a = dst.a * (0xff - src.a * SCA / 0xff) / 0xff
+ src.a * SCA / 0xff
dst.a: destination alpha
src.a: pixel alpha
SCA : plane alpha
When SCA = 0xff, the formula becomes:
dst.a = dst.a * (0xff - src.a) + src.a
This patch is to set the destination alpha (background) to 0xff:
- When dst.a = 0 (before), dst.a = src.a
- When dst.a = 0xff (after) , dst.a = 0xff * (0xff - src.a) + src.a
According to the fomula above:
- When src.a = 0 , dst.a = 0
- When src.a = 0xff, dst.a = 0xff
This two cases are just still correct. But when src.a is
between 0 and 0xff, the difference starts to appear
Fixes: 616443ca577e ("drm/mediatek: Move cmdq_reg info from struct mtk_ddp_comp to sub driver private data")
Signed-off-by: Hsiao Chien Sung <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Although the alpha channel in XRGB formats can be ignored, ALPHA_CON
must be configured accordingly when using XRGB formats or it will still
affects CRC generation.
Fixes: d886c0009bd0 ("drm/mediatek: Add ETHDR support for MT8195")
Reviewed-by: CK Hu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Hsiao Chien Sung <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|