aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/arm
AgeCommit message (Collapse)AuthorFilesLines
2024-08-30drm: komeda: Fix an issue related to normalized zposhongchi.peng1-3/+7
We use komeda_crtc_normalize_zpos to normalize zpos of affected planes to their blending zorder in CU. If there's only one slave plane in affected planes and its layer_split property is enabled, order++ for its split layer, so that when calculating the normalized_zpos of master planes, the split layer of the slave plane is included, but the max_slave_zorder does not include the split layer and keep zero because there's only one slave plane in affacted planes, although we actually use two slave layers in this commit. In most cases, this bug does not result in a commit failure, but assume the following situation: slave_layer 0: zpos = 0, layer split enabled, normalized_zpos = 0;(use slave_layer 2 as its split layer) master_layer 0: zpos = 2, layer_split enabled, normalized_zpos = 2;(use master_layer 2 as its split layer) master_layer 1: zpos = 4, normalized_zpos = 4; master_layer 3: zpos = 5, normalized_zpos = 5; kcrtc_st->max_slave_zorder = 0; When we use master_layer 3 as a input of CU in function komeda_compiz_set_input and check it with function komeda_component_check_input, the parameter idx is equal to normailzed_zpos minus max_slave_zorder, the value of idx is 5 and is euqal to CU's max_active_inputs, so that komeda_component_check_input returns a -EINVAL value. To fix the bug described above, when calculating the max_slave_zorder with the layer_split enabled, count the split layer in this calculation directly. Signed-off-by: hongchi.peng <hongchi.peng@siengine.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240826024517.3739-1-hongchi.peng@siengine.com
2024-07-05Merge v6.10-rc6 into drm-nextDaniel Vetter2-9/+1
The exynos-next pull is based on a newer -rc than drm-next. hence backmerge first to make sure the unrelated conflicts we accumulated don't end up randomly in the exynos merge pull, but are separated out. Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma code, and cherry-pick conflict in xe. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2024-06-21Merge tag 'drm-misc-next-2024-05-30' of ↵Dave Airlie4-18/+44
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for 6.11: UAPI Changes: - Deprecate DRM date and return a 0 date in DRM_IOCTL_VERSION Core Changes: - connector: Create a set of helpers to help with HDMI support - fbdev: Create memory manager optimized fbdev emulation - panic: Allow to select fonts, improve drm_fb_dma_get_scanout_buffer Driver Changes: - Remove driver owner assignments - Allow more drivers to compile with COMPILE_TEST - Conversions to drm_edid - ivpu: hardware scheduler support, profiling support, improvements to the platform support layer - mgag200: general reworks and improvements - nouveau: Add NVreg_RegistryDwords command line option - rockchip: Conversion to the hdmi helpers - sun4i: Conversion to the hdmi helpers - vc4: Conversion to the hdmi helpers - v3d: Perf counters improvements - zynqmp: IRQ and debugfs improvements - bridge: - Remove redundant checks on bridge->encoder - panels: - Switch panels from register table initialization to proper code - Now that the panel code tracks the panel state, remove every ad-hoc implementation in the panel drivers - New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology 13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE nv110wum-l60, IVO t109nw41 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240530-hilarious-flat-magpie-5fa186@houat
2024-06-14Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard1-5/+0
Roll -rc3 and current drm/fixes in. This will also unstuck our for-next branch. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-06-14arm/komeda: Remove all CONFIG_DEBUG_FS conditional compilationspengfuyuan1-8/+0
Since the debugfs functions have no-op stubs for CONFIG_DEBUG_FS=n, the compiler will optimize the rest away since they are no longer referenced. The benefit of removing the conditional compilation is that the build is actually tested for both CONFIG_DEBUG_FS configuration values. Assuming most developers have it enabled, CONFIG_DEBUG_FS=n is not tested much and may fail the build due to the conditional compilation. Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240606120842.1377267-1-pengfuyuan@kylinos.cn Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-06-10drm/komeda: check for error-valued pointerAmjad Ouled-Ameur1-1/+1
komeda_pipeline_get_state() may return an error-valued pointer, thus check the pointer for negative or null value before dereferencing. Fixes: 502932a03fce ("drm/komeda: Add the initial scaler support for CORE") Signed-off-by: Amjad Ouled-Ameur <amjad.ouled-ameur@arm.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240610102056.40406-1-amjad.ouled-ameur@arm.com
2024-06-07Merge tag 'drm-misc-next-fixes-2024-06-07' of ↵Dave Airlie1-5/+0
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-next-fixes for v6.10-rc3: - Single unused struct removal that should have been in -fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0251b6ae-bffa-44b2-b698-955712c25a27@linux.intel.com
2024-05-31drm/komeda: remove unused struct 'gamma_curve_segment'Dr. David Alan Gilbert1-5/+0
'gamma_curve_segment' looks like it has never been used. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240516133724.251750-1-linux@treblig.org Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2024-05-27Merge drm/drm-next into drm-misc-nextMaxime Ripard1-2/+2
Let's start the new release cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-05-18Merge tag 'kbuild-v6.10' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Avoid 'constexpr', which is a keyword in C23 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of 'dt_binding_check' - Fix weak references to avoid GOT entries in position-independent code generation - Convert the last use of 'optional' property in arch/sh/Kconfig - Remove support for the 'optional' property in Kconfig - Remove support for Clang's ThinLTO caching, which does not work with the .incbin directive - Change the semantics of $(src) so it always points to the source directory, which fixes Makefile inconsistencies between upstream and downstream - Fix 'make tar-pkg' for RISC-V to produce a consistent package - Provide reasonable default coverage for objtool, sanitizers, and profilers - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc. - Remove the last use of tristate choice in drivers/rapidio/Kconfig - Various cleanups and fixes in Kconfig * tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits) kconfig: use sym_get_choice_menu() in sym_check_prop() rapidio: remove choice for enumeration kconfig: lxdialog: remove initialization with A_NORMAL kconfig: m/nconf: merge two item_add_str() calls kconfig: m/nconf: remove dead code to display value of bool choice kconfig: m/nconf: remove dead code to display children of choice members kconfig: gconf: show checkbox for choice correctly kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal Makefile: remove redundant tool coverage variables kbuild: provide reasonable defaults for tool coverage modules: Drop the .export_symbol section from the final modules kconfig: use menu_list_for_each_sym() in sym_check_choice_deps() kconfig: use sym_get_choice_menu() in conf_write_defconfig() kconfig: add sym_get_choice_menu() helper kconfig: turn defaults and additional prompt for choice members into error kconfig: turn missing prompt for choice members into error kconfig: turn conf_choice() into void function kconfig: use linked list in sym_set_changed() kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED kconfig: gconf: remove debug code ...
2024-05-10drm/arm/komeda: update DMA mask to 40 bitsAmjad Ouled-Ameur1-0/+4
Each layer in the DPU has a 40-bit base address register, which indicates start of frame buffer data for that layer. Komeda driver does not set its DMA mask, which makes it 32-bit by default which does not use the entire available possible supported by the DPU. Update the DMA mask to align with DPU Architecture v1.0 spec. Signed-off-by: Amjad Ouled-Ameur <amjad.ouled-ameur@arm.com> Signed-off-by: Faiz Abbas <faiz.abbas@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240219100915.192475-4-faiz.abbas@arm.com Acked-by: Liviu Dudau <liviu.dudau@arm.com>
2024-05-10drm/arm/komeda: Move pipeline prints to after the entire pipeline has been ↵Faiz Abbas3-2/+5
enabled The komeda driver prints a pretty verbose log in komeda_pipeline_dump() detailing the components of each of the two pipelines. This gets printed multiple times during boot as komeda EPROBE_DEFERs waiting for the remote bridge drivers to come up. Move this log to after this has happened indicating that the printed pipeline is actually completely up. Signed-off-by: Faiz Abbas <faiz.abbas@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240219100915.192475-3-faiz.abbas@arm.com Acked-by: Liviu Dudau <liviu.dudau@arm.com>
2024-05-10drm/arm/komeda: Fix komeda probe failing if there are no links in the ↵Faiz Abbas1-11/+32
secondary pipeline Since commit 4cfe5cc02e3f ("drm/arm/komeda: Remove component framework and add a simple encoder"), the devm_drm_of_get_bridge() call happens regardless of whether any remote nodes are available on the pipeline. Fix this by moving the bridge attach to its own function and calling it conditional on there being an output link. Fixes: 4cfe5cc02e3f ("drm/arm/komeda: Remove component framework and add a simple encoder") Signed-off-by: Faiz Abbas <faiz.abbas@arm.com> [Corrected Commit-id of the fixed patch to match mainline] Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240219100915.192475-2-faiz.abbas@arm.com
2024-05-10drm/arm/komeda: don't use confusing 'timeout' variable nameWolfram Sang1-3/+1
There is a confusing pattern in the kernel to use a variable named 'timeout' to store the result of wait_for_completion_timeout() causing patterns like: timeout = wait_for_completion_timeout(...) if (!timeout) return -ETIMEDOUT; with all kinds of permutations. Check the return value directly to drop 'timeout' which also fixes its wrong type. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240507090200.7936-2-wsa+renesas@sang-engineering.com [changed commit title to match driver name] Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com>
2024-05-10kbuild: use $(src) instead of $(srctree)/$(src) for source directoryMasahiro Yamada1-2/+2
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build: src := $(obj) When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While Kbuild resolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler. This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter. To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree. Going forward, the variables used in Makefiles will have the following meanings: $(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source tree Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-05-02drm/arm/komeda: Use fbdev-dmaThomas Zimmermann1-2/+2
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports damage handling, which is required by komeda. Avoids the overhead of fbdev-generic's additional shadow buffering. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-23-tzimmermann@suse.de
2024-04-26drm/komeda: fix missing seq_file includesDave Airlie2-0/+3
This fails to build with missing seq declerations. Fixes: 9e2b84fb6cd7 ("drm/print: drop include seq_file.h") Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-04-12drm/arm/malidp: fix a possible null pointer dereferenceHuai-Yuan Liu1-1/+4
In malidp_mw_connector_reset, new memory is allocated with kzalloc, but no check is performed. In order to prevent null pointer dereferencing, ensure that mw_state is checked before calling __drm_atomic_helper_connector_reset. Fixes: 8cbc5caf36ef ("drm: mali-dp: Add writeback connector") Signed-off-by: Huai-Yuan Liu <qq810974084@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240407063053.5481-1-qq810974084@gmail.com
2023-12-13drm/drm_property: make replace_property_blob_from_id a DRM helperMelissa Wen1-1/+1
Place it in drm_property where drm_property_replace_blob and drm_property_lookup_blob live. Then we can use the DRM helper for driver-specific KMS properties too. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-29Merge tag 'drm-misc-next-2023-09-27' of ↵Dave Airlie6-1/+30
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.7-rc1: UAPI Changes: - drm_file owner is now updated during use, in the case of a drm fd opened by the display server for a client, the correct owner is displayed. - Qaic gains support for the QAIC_DETACH_SLICE_BO ioctl to allow bo recycling. Cross-subsystem Changes: - Disable boot logo for au1200fb, mmpfb and unexport logo helpers. Only fbcon should manage display of logo. - Update freescale in MAINTAINERS. - Add some bridge files to bridge in MAINTAINERS. - Update gma500 driver repo in MAINTAINERS to point to drm-misc. Core Changes: - Move size computations to drm buddy allocator. - Make drm_atomic_helper_shutdown(NULL) a nop. - Assorted small fixes in drm_debugfs, DP-MST payload addition error handling. - Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR handling. - Handle bad (h/v)sync_end in EDID by clipping to htotal. - Build GPUVM as a module. Driver Changes: - Simple drivers don't need to cache prepared result. - Call drm_atomic_helper_shutdown() in shutdown/unbind for a whole lot more drm drivers. - Assorted small fixes in amdgpu, ssd130x, bridge/it6621, accel/qaic, nouveau, tc358768. - Add NV12 for komeda writeback. - Add arbitration lost event to synopsis/dw-hdmi-cec. - Speed up s/r in nouveau by not restoring some big bo's. - Assorted nouveau display rework in preparation for GSP-RM, especially related to how the modeset sequence works and the DP sequence in relation to link training. - Update anx7816 panel. - Support NVSYNC and NHSYNC in tegra. - Allow multiple power domains in simple driver. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f1fae5eb-25b8-192a-9a53-215e1184ce81@linux.intel.com
2023-09-22Merge tag 'drm-misc-next-2023-09-11-1' of ↵Dave Airlie1-3/+6
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.7-rc1: UAPI Changes: - Nouveau changed to not set NO_PREFETCH flag explicitly. Cross-subsystem Changes: - Update documentation of dma-buf intro and uapi. - fbdev/sbus fixes. - Use initializer macros in a lot of fbdev drivers. - Add Boris Brezillon as Panfrost driver maintainer. - Add Jessica Zhang as drm/panel reviewer. - Make more fbdev drivers use fb_ops helpers for deferred io. - Small hid trailing whitespace fix. - Use fb_ops in hid/picolcd Core Changes: - Assorted small fixes to ttm tests, drm/mst. - Documentation updates to bridge. - Add kunit tests for some drm_fb functions. - Rework drm_debugfs implementation. - Update xe documentation to mark todos as completed. Driver Changes: - Add support to rockchip for rv1126 mipi-dsi and vop. - Assorted small fixes to nouveau, bridge/samsung-dsim, bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper, komeda, virtio, ssd130x. - Add support for simple panels Mitsubishi AA084XE01, JDI LPM102A188A, - Documentation updates to accel/ivpu. - Some nouveau scheduling/fence fixes. - Power management related fixes and other fixes to ivpu. - Assorted bridge/it66121 fixes. - Make platform drivers return void in remove() callback. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com
2023-09-21drm: Call drm_atomic_helper_shutdown() at shutdown time for misc driversDouglas Anderson5-0/+29
Based on grepping through the source code these drivers appear to be missing a call to drm_atomic_helper_shutdown() at system shutdown time. Among other things, this means that if a panel is in use that it won't be cleanly powered off at system shutdown time. The fact that we should call drm_atomic_helper_shutdown() in the case of OS shutdown/restart comes straight out of the kernel doc "driver instance overview" in drm_drv.c. All of the drivers in this patch were fairly straightforward to fix since they already had a call to drm_atomic_helper_shutdown() at remove/unbind time but were just lacking one at system shutdown. The only hitch is that some of these drivers use the component model to register/unregister their DRM devices. The shutdown callback is part of the original device. The typical solution here, based on how other DRM drivers do this, is to keep track of whether the device is bound based on drvdata. In most cases the drvdata is the drm_device, so we can just make sure it is NULL when the device is not bound. In some drivers, this required minor code changes. To make things simpler, drm_atomic_helper_shutdown() has been modified to consider a NULL drm_device as a noop in the patch ("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a noop"). Suggested-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Maxime Ripard <mripard@kernel.org> Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Tested-by: Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.2.I9115e5d094a43e687978b0699cc1fe9f2a3452ea@changeid
2023-09-15drm/komeda: add NV12 format to support writeback layer typebaozhu.liu1-1/+1
When testing the d71 writeback layer function, the output format is set to NV12, and the following error message is displayed: [drm:komeda_fb_is_layer_supported] Layer TYPE: 4 doesn't support fb FMT: NV12 little-endian (0x3231564e) with modifier: 0x0.. Check the d71 data manual, writeback layer output formats includes NV12 format. Signed-off-by: baozhu.liu <lucas.liu@siengine.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829093004.22860-1-lucas.liu@siengine.com
2023-08-31drm/komeda: drop all currently held locks if deadlock happensbaozhu.liu1-3/+6
If komeda_pipeline_unbound_components() returns -EDEADLK, it means that a deadlock happened in the locking context. Currently, komeda is not dealing with the deadlock properly,producing the following output when CONFIG_DEBUG_WW_MUTEX_SLOWPATH is enabled: ------------[ cut here ]------------ [ 26.103984] WARNING: CPU: 2 PID: 345 at drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c:1248 komeda_release_unclaimed_resources+0x13c/0x170 [ 26.117453] Modules linked in: [ 26.120511] CPU: 2 PID: 345 Comm: composer@2.1-se Kdump: loaded Tainted: G W 5.10.110-SE-SDK1.8-dirty #16 [ 26.131374] Hardware name: Siengine Se1000 Evaluation board (DT) [ 26.137379] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--) [ 26.143385] pc : komeda_release_unclaimed_resources+0x13c/0x170 [ 26.149301] lr : komeda_release_unclaimed_resources+0xbc/0x170 [ 26.155130] sp : ffff800017b8b8d0 [ 26.158442] pmr_save: 000000e0 [ 26.161493] x29: ffff800017b8b8d0 x28: ffff000cf2f96200 [ 26.166805] x27: ffff000c8f5a8800 x26: 0000000000000000 [ 26.172116] x25: 0000000000000038 x24: ffff8000116a0140 [ 26.177428] x23: 0000000000000038 x22: ffff000cf2f96200 [ 26.182739] x21: ffff000cfc300300 x20: ffff000c8ab77080 [ 26.188051] x19: 0000000000000003 x18: 0000000000000000 [ 26.193362] x17: 0000000000000000 x16: 0000000000000000 [ 26.198672] x15: b400e638f738ba38 x14: 0000000000000000 [ 26.203983] x13: 0000000106400a00 x12: 0000000000000000 [ 26.209294] x11: 0000000000000000 x10: 0000000000000000 [ 26.214604] x9 : ffff800012f80000 x8 : ffff000ca3308000 [ 26.219915] x7 : 0000000ff3000000 x6 : ffff80001084034c [ 26.225226] x5 : ffff800017b8bc40 x4 : 000000000000000f [ 26.230536] x3 : ffff000ca3308000 x2 : 0000000000000000 [ 26.235847] x1 : 0000000000000000 x0 : ffffffffffffffdd [ 26.241158] Call trace: [ 26.243604] komeda_release_unclaimed_resources+0x13c/0x170 [ 26.249175] komeda_crtc_atomic_check+0x68/0xf0 [ 26.253706] drm_atomic_helper_check_planes+0x138/0x1f4 [ 26.258929] komeda_kms_check+0x284/0x36c [ 26.262939] drm_atomic_check_only+0x40c/0x714 [ 26.267381] drm_atomic_nonblocking_commit+0x1c/0x60 [ 26.272344] drm_mode_atomic_ioctl+0xa3c/0xb8c [ 26.276787] drm_ioctl_kernel+0xc4/0x120 [ 26.280708] drm_ioctl+0x268/0x534 [ 26.284109] __arm64_sys_ioctl+0xa8/0xf0 [ 26.288030] el0_svc_common.constprop.0+0x80/0x240 [ 26.292817] do_el0_svc+0x24/0x90 [ 26.296132] el0_svc+0x20/0x30 [ 26.299185] el0_sync_handler+0xe8/0xf0 [ 26.303018] el0_sync+0x1a4/0x1c0 [ 26.306330] irq event stamp: 0 [ 26.309384] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 26.315650] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.323825] softirqs last enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.331997] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 26.338261] ---[ end trace 20ae984fa860184a ]--- [ 26.343021] ------------[ cut here ]------------ [ 26.347646] WARNING: CPU: 3 PID: 345 at drivers/gpu/drm/drm_modeset_lock.c:228 drm_modeset_drop_locks+0x84/0x90 [ 26.357727] Modules linked in: [ 26.360783] CPU: 3 PID: 345 Comm: composer@2.1-se Kdump: loaded Tainted: G W 5.10.110-SE-SDK1.8-dirty #16 [ 26.371645] Hardware name: Siengine Se1000 Evaluation board (DT) [ 26.377647] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--) [ 26.383649] pc : drm_modeset_drop_locks+0x84/0x90 [ 26.388351] lr : drm_mode_atomic_ioctl+0x860/0xb8c [ 26.393137] sp : ffff800017b8bb10 [ 26.396447] pmr_save: 000000e0 [ 26.399497] x29: ffff800017b8bb10 x28: 0000000000000001 [ 26.404807] x27: 0000000000000038 x26: 0000000000000002 [ 26.410115] x25: ffff000cecbefa00 x24: ffff000cf2f96200 [ 26.415423] x23: 0000000000000001 x22: 0000000000000018 [ 26.420731] x21: 0000000000000001 x20: ffff800017b8bc10 [ 26.426039] x19: 0000000000000000 x18: 0000000000000000 [ 26.431347] x17: 0000000002e8bf2c x16: 0000000002e94c6b [ 26.436655] x15: 0000000002ea48b9 x14: ffff8000121f0300 [ 26.441963] x13: 0000000002ee2ca8 x12: ffff80001129cae0 [ 26.447272] x11: ffff800012435000 x10: ffff000ed46b5e88 [ 26.452580] x9 : ffff000c9935e600 x8 : 0000000000000000 [ 26.457888] x7 : 000000008020001e x6 : 000000008020001f [ 26.463196] x5 : ffff80001085fbe0 x4 : fffffe0033a59f20 [ 26.468504] x3 : 000000008020001e x2 : 0000000000000000 [ 26.473813] x1 : 0000000000000000 x0 : ffff000c8f596090 [ 26.479122] Call trace: [ 26.481566] drm_modeset_drop_locks+0x84/0x90 [ 26.485918] drm_mode_atomic_ioctl+0x860/0xb8c [ 26.490359] drm_ioctl_kernel+0xc4/0x120 [ 26.494278] drm_ioctl+0x268/0x534 [ 26.497677] __arm64_sys_ioctl+0xa8/0xf0 [ 26.501598] el0_svc_common.constprop.0+0x80/0x240 [ 26.506384] do_el0_svc+0x24/0x90 [ 26.509697] el0_svc+0x20/0x30 [ 26.512748] el0_sync_handler+0xe8/0xf0 [ 26.516580] el0_sync+0x1a4/0x1c0 [ 26.519891] irq event stamp: 0 [ 26.522943] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 26.529207] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.537379] softirqs last enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.545550] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 26.551812] ---[ end trace 20ae984fa860184b ]--- According to the call trace information,it can be located to be WARN_ON(IS_ERR(c_st)) in the komeda_pipeline_unbound_components function; Then follow the function. komeda_pipeline_unbound_components -> komeda_component_get_state_and_set_user -> komeda_pipeline_get_state_and_set_crtc -> komeda_pipeline_get_state ->drm_atomic_get_private_obj_state -> drm_atomic_get_private_obj_state -> drm_modeset_lock komeda_pipeline_unbound_components -> komeda_component_get_state_and_set_user -> komeda_component_get_state -> drm_atomic_get_private_obj_state -> drm_modeset_lock ret = drm_modeset_lock(&obj->lock, state->acquire_ctx); if (ret) return ERR_PTR(ret); Here it return -EDEADLK. deal with the deadlock as suggested by [1], using the function drm_modeset_backoff(). [1] https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locking Therefore, handling this problem can be solved by adding return -EDEADLK back to the drm_modeset_backoff processing flow in the drm_mode_atomic_ioctl function. Signed-off-by: baozhu.liu <lucas.liu@siengine.com> Signed-off-by: menghui.huang <menghui.huang@siengine.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230804013117.6870-1-menghui.huang@siengine.com
2023-08-30Merge tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds8-71/+37
Pull drm updates from Dave Airlie: "The drm core grew a new generic gpu virtual address manager, and new execution locking helpers. These are used by nouveau now to provide uAPI support for the userspace Vulkan driver. AMD had a bunch of new IP core support, loads of refactoring around fbdev, but mostly just the usual amount of stuff across the board. core: - fix gfp flags in drmm_kmalloc gpuva: - add new generic GPU VA manager (for nouveau initially) syncobj: - add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl dma-buf: - acquire resv lock for mmap() in exporters - support dma-buf self import automatically - docs fixes backlight: - fix fbdev interactions atomic: - improve logging prime: - remove struct gem_prim_mmap plus driver updates gem: - drm_exec: add locking over multiple GEM objects - fix lockdep checking fbdev: - make fbdev userspace interfaces optional - use linux device instead of fbdev device - use deferred i/o helper macros in various drivers - Make FB core selectable without drivers - Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT - Add helper macros and Kconfig tokens for DMA-allocated framebuffer ttm: - support init_on_free - swapout fixes panel: - panel-edp: Support AUO B116XAB01.4 - Support Visionox R66451 plus DT bindings - ld9040: - Backlight support - magic improved - Kconfig fix - Convert to of_device_get_match_data() - Fix Kconfig dependencies - simple: - Set bpc value to fix warning - Set connector type for AUO T215HVN01 - Support Innolux G156HCE-L01 plus DT bindings - ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings - startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings - sitronix-st7789v: - Support Inanbo T28CP45TN89 plus DT bindings - Support EDT ET028013DMA plus DT bindings - Various cleanups - edp: Add timings for N140HCA-EAC - Allow panels and touchscreens to power sequence together - Fix Innolux G156HCE-L01 LVDS clock bridge: - debugfs for chains support - dw-hdmi: - Improve support for YUV420 bus format - CEC suspend/resume - update EDID on HDMI detect - dw-mipi-dsi: Fix enable/disable of DSI controller - lt9611uxc: Use MODULE_FIRMWARE() - ps8640: Remove broken EDID code - samsung-dsim: Fix command transfer - tc358764: - Handle HS/VS polarity - Use BIT() macro - Various cleanups - adv7511: Fix low refresh rate - anx7625: - Switch to macros instead of hardcoded values - locking fixes - tc358767: fix hardware delays - sitronix-st7789v: - Support panel orientation - Support rotation property - Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings amdgpu: - SDMA 6.1.0 support - HDP 6.1 support - SMUIO 14.0 support - PSP 14.0 support - IH 6.1 support - Lots of checkpatch cleanups - GFX 9.4.3 updates - Add USB PD and IFWI flashing documentation - GPUVM updates - RAS fixes - DRR fixes - FAMS fixes - Virtual display fixes - Soft IH fixes - SMU13 fixes - Rework PSP firmware loading for other IPs - Kernel doc fixes - DCN 3.0.1 fixes - LTTPR fixes - DP MST fixes - DCN 3.1.6 fixes - SMU 13.x fixes - PSP 13.x fixes - SubVP fixes - GC 9.4.3 fixes - Display bandwidth calculation fixes - VCN4 secure submission fixes - Allow building DC on RISC-V - Add visible FB info to bo_print_info - HBR3 fixes - GFX9 MCBP fix - GMC10 vmhub index fix - GMC11 vmhub index fix - Create a new doorbell manager - SR-IOV fixes - initial freesync panel replay support - revert zpos properly until igt regression is fixeed - use TTM to manage doorbell BAR - Expose both current and average power via hwmon if supported amdkfd: - Cleanup CRIU dma-buf handling - Use KIQ to unmap HIQ - GFX 9.4.3 debugger updates - GFX 9.4.2 debugger fixes - Enable cooperative groups fof gfx11 - SVM fixes - Convert older APUs to use dGPU path like newer APUs - Drop IOMMUv2 path as it is no longer used - TBA fix for aldebaran i915: - ICL+ DSI modeset sequence - HDCP improvements - MTL display fixes and cleanups - HSW/BDW PSR1 restored - Init DDI ports in VBT order - General display refactors - Start using plane scale factor for relative data rate - Use shmem for dpt objects - Expose RPS thresholds in sysfs - Apply GuC SLPC min frequency softlimit correctly - Extend Wa_14015795083 to TGL, RKL, DG1 and ADL - Fix a VMA UAF for multi-gt platform - Do not use stolen on MTL due to HW bug - Check HuC and GuC version compatibility on MTL - avoid infinite GPU waits due to premature release of request memory - Fixes and updates for GSC memory allocation - Display SDVO fixes - Take stolen handling out of FBC code - Make i915_coherent_map_type GT-centric - Simplify shmem_create_from_object map_type msm: - SM6125 MDSS support - DPU: SM6125 DPU support - DSI: runtime PM support, burst mode support - DSI PHY: SM6125 support in 14nm DSI PHY driver - GPU: prepare for a7xx - fix a690 firmware - disable relocs on a6xx and newer radeon: - Lots of checkpatch cleanups ast: - improve device-model detection - Represent BMV as virtual connector - Report DP connection status nouveau: - add new exec/bind interface to support Vulkan - document some getparam ioctls - improve VRAM detection - various fixes/cleanups - workraound DPCD issues ivpu: - MMU updates - debugfs support - Support vpu4 virtio: - add sync object support atmel-hlcdc: - Support inverted pixclock polarity etnaviv: - runtime PM cleanups - hang handling fixes exynos: - use fbdev DMA helpers - fix possible NULL ptr dereference komeda: - always attach encoder omapdrm: - use fbdev DMA helpers ingenic: - kconfig regmap fixes loongson: - support display controller mediatek: - Small mtk-dpi cleanups - DisplayPort: support eDP and aux-bus - Fix coverity issues - Fix potential memory leak if vmap() fail mgag200: - minor fixes mxsfb: - support disabling overlay planes panfrost: - fix sync in IRQ handling ssd130x: - Support per-controller default resolution plus DT bindings - Reduce memory-allocation overhead - Improve intermediate buffer size computation - Fix allocation of temporary buffers - Fix pitch computation - Fix shadow plane allocation tegra: - use fbdev DMA helpers - Convert to devm_platform_ioremap_resource() - support bridge/connector - enable PM tidss: - Support TI AM625 plus DT bindings - Implement new connector model plus driver updates vkms: - improve write back support - docs fixes - support gamma LUT zynqmp-dpsub: - misc fixes" * tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits) drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map() drm/tests/drm_kunit_helpers: Place correct function name in the comment header drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly drm/nouveau: uvmm: fix unset region pointer on remap drm/nouveau: sched: avoid job races between entities drm/i915: Fix HPD polling, reenabling the output poll work as needed drm: Add an HPD poll helper to reschedule the poll work drm/i915: Fix TLB-Invalidation seqno store drm/ttm/tests: Fix type conversion in ttm_pool_test drm/msm/a6xx: Bail out early if setting GPU OOB fails drm/msm/a6xx: Move LLC accessors to the common header drm/msm/a6xx: Introduce a6xx_llc_read drm/ttm/tests: Require MMU when testing drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0"" drm/amdgpu: Add memory vendor information drm/amd: flush any delayed gfxoff on suspend entry drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix drm/amdgpu: Remove gfxoff check in GFX v9.4.3 drm/amd/pm: Update pci link speed for smu v13.0.6 ...
2023-08-24minmax: add in_range() macroMatthew Wilcox (Oracle)2-13/+13
Patch series "New page table range API", v6. This patchset changes the API used by the MM to set up page table entries. The four APIs are: set_ptes(mm, addr, ptep, pte, nr) update_mmu_cache_range(vma, addr, ptep, nr) flush_dcache_folio(folio) flush_icache_pages(vma, page, nr) flush_dcache_folio() isn't technically new, but no architecture implemented it, so I've done that for them. The old APIs remain around but are mostly implemented by calling the new interfaces. The new APIs are based around setting up N page table entries at once. The N entries belong to the same PMD, the same folio and the same VMA, so ptep++ is a legitimate operation, and locking is taken care of for you. Some architectures can do a better job of it than just a loop, but I have hesitated to make too deep a change to architectures I don't understand well. One thing I have changed in every architecture is that PG_arch_1 is now a per-folio bit instead of a per-page bit when used for dcache clean/dirty tracking. This was something that would have to happen eventually, and it makes sense to do it now rather than iterate over every page involved in a cache flush and figure out if it needs to happen. The point of all this is better performance, and Fengwei Yin has measured improvement on x86. I suspect you'll see improvement on your architecture too. Try the new will-it-scale test mentioned here: https://lore.kernel.org/linux-mm/20230206140639.538867-5-fengwei.yin@intel.com/ You'll need to run it on an XFS filesystem and have CONFIG_TRANSPARENT_HUGEPAGE set. This patchset is the basis for much of the anonymous large folio work being done by Ryan, so it's received quite a lot of testing over the last few months. This patch (of 38): Determine if a value lies within a range more efficiently (subtraction + comparison vs two comparisons and an AND). It also has useful (under some circumstances) behaviour if the range exceeds the maximum value of the type. Convert all the conflicting definitions of in_range() within the kernel; some can use the generic definition while others need their own definition. Link: https://lkml.kernel.org/r/20230802151406.3735276-1-willy@infradead.org Link: https://lkml.kernel.org/r/20230802151406.3735276-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-21drm/arm/komeda: Remove component framework and add a simple encoderFaiz Abbas4-62/+29
The Komeda driver always expects the remote connector node to initialize an encoder. It uses the component aggregator framework which consists of component->bind() calls used to initialize the remote encoder and attach it to the crtc. This makes it incompatible with connector drivers which implement drm_bridge APIs. Remove all component framework calls from the komeda driver and declare and attach an encoder inside komeda_crtc_add(). The remote connector driver has to implement the DRM bridge APIs which can be used to glue the encoder to the remote connector. Since we usually pair this with a component encoder that also implements a drm_bridge, dropping support is not expected to affect users of this driver. Signed-off-by: Faiz Abbas <faiz.abbas@arm.com> Message-ID: <20230712064937.25192-1-faiz.abbas@arm.com> [small white space fixes flagged by checkpatch.pl] Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230712064937.25192-1-faiz.abbas@arm.com
2023-07-21drm: Explicitly include correct DT includesRob Herring2-1/+2
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
2023-07-10drm/arm: Make ARM devices menu depend on DRMJavier Martinez Canillas1-0/+1
Otherwise if CONFIG_DRM is disabled, menuconfig will show an empty menu. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230703230534.997525-4-javierm@redhat.com
2023-06-08drm/arm/malidp: Convert to platform remove callback returning voidUwe Kleine-König1-3/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-4-u.kleine-koenig@pengutronix.de
2023-06-08drm/arm/hdlcd: Convert to platform remove callback returning voidUwe Kleine-König1-3/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-3-u.kleine-koenig@pengutronix.de
2023-06-08drm/komeda: Convert to platform remove callback returning voidUwe Kleine-König1-3/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-2-u.kleine-koenig@pengutronix.de
2023-04-16drm/aperture: Remove primary argumentDaniel Vetter1-1/+1
Only really pci devices have a business setting this - it's for figuring out whether the legacy vga stuff should be nuked too. And with the preceding two patches those are all using the pci version of this. Which means for all other callers primary == false and we can remove it now. v2: - Reorder to avoid compile fail (Thomas) - Include gma500, which retained it's called to the non-pci version. v4: - fix Daniel's S-o-b address v5: - add back an S-o-b tag with Daniel's Intel address Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Deepak Rawat <drawat.floss@gmail.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Emma Anholt <emma@anholt.net> Cc: Helge Deller <deller@gmx.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-hyperv@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-4-tzimmermann@suse.de
2023-03-17drm/arm/hdlcd: Use devm_platform_ioremap_resource()Yang Li1-3/+1
According to commit 7945f929f1a7 ("drivers: provide devm_platform_ioremap_resource()"), convert platform_get_resource(), devm_ioremap_resource() to a single call to Use devm_platform_ioremap_resource(), as this is exactly what this function does. Since 'struct platform_device *pdev = to_platform_device(drm->dev)', 'drm->dev' is equivalent to 'pdev->deva'. Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230314080231.20212-1-yang.lee@linux.alibaba.com
2023-03-17drm/arm/malidp: Use devm_platform_get_and_ioremap_resource()Yang Li1-2/+1
According to commit 890cc39a8799 ("drivers: provide devm_platform_get_and_ioremap_resource()"), convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Since 'struct platform_device *pdev = to_platform_device(dev)', 'pdev->dev' is equivalent to 'dev'. Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230314080231.20212-2-yang.lee@linux.alibaba.com
2023-03-14arm/malidp: Use GEM DMA fbdev emulationThomas Zimmermann1-2/+2
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-4-tzimmermann@suse.de
2023-03-14arm/hdlcd: Use GEM DMA fbdev emulationThomas Zimmermann1-2/+2
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-3-tzimmermann@suse.de
2023-02-03drm/arm/malidp: use sysfs_emit in show function callbackDeepak R Varma1-1/+1
According to Documentation/filesystems/sysfs.rst, the show() callback function of kobject attributes should strictly use sysfs_emit() instead of sprintf() family functions. Issue identified using the device_attr_show.cocci Coccinelle script. Signed-off-by: Deepak R Varma <drv@mailo.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y9Q5Tt8c9WBDxeyV@ubun2204.myguest.virtualbox.org
2023-01-18drm/arm/komeda: Remove unnecessary include statements for drm_crtc_helper.hThomas Zimmermann2-2/+0
Several source files include drm_crtc_helper.h without needing it or only to get its transitive include statements; leading to unnecessary compile-time dependencies. Drop drm_crtc_helper.h where possible. v2: * update commit message (Sam) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230116131235.18917-5-tzimmermann@suse.de
2023-01-13drm: Include <linux/of.h> where neededThomas Zimmermann1-0/+1
Include <linux/of.h> in source files that need it. Some of DRM's source code gets OF header via drm_crtc_helper.h and <linux/fb.h>, which can leed to unnecessary recompilation. In drm_modes.c, add a comment on the reason for still including <linux/fb.h>. The header file is required to get KHZ2PICOS(). The macro is part of the UAPI headers, so it cannot be moved to a less prominent location. v2: * include <linux/of.h> in komeda_drv.c (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Liviu Dudau <liviu.dudau@arm.com> # komeda Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-3-tzimmermann@suse.de
2023-01-06drm/arm/hdlcd: use new debugfs device-centered functionsMaíra Canal1-15/+9
Replace the use of drm_debugfs_create_files() with the new drm_debugfs_add_files() function, which center the debugfs files management on the drm_device instead of drm_minor. Moreover, remove the debugfs_init hook and add the debugfs files directly on hdlcd_drm_bind(), before drm_dev_register(). Signed-off-by: Maíra Canal <mcanal@igalia.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20221226155029.244355-4-mcanal@igalia.com
2022-11-16drm/arm/malidp: remove calls to drm_mode_config_cleanup()Danilo Krummrich1-14/+6
drm_mode_config_init() simply calls drmm_mode_config_init(), hence cleanup is automatically handled through registering drm_mode_config_cleanup() with drmm_add_action_or_reset(). While at it, get rid of the deprecated drm_mode_config_init() and replace it with drmm_mode_config_init() directly. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026155934.125294-6-dakr@redhat.com
2022-11-16drm/arm/malidp: plane: use drm managed resourcesDanilo Krummrich1-21/+7
Use drm managed resource allocation (drmm_universal_plane_alloc()) in order to get rid of the explicit destroy hook in struct drm_plane_funcs. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026155934.125294-5-dakr@redhat.com
2022-11-16drm/arm/malidp: crtc: use drmm_crtc_init_with_planes()Danilo Krummrich1-3/+2
Use drmm_crtc_init_with_planes() instead of drm_crtc_init_with_planes() to get rid of the explicit destroy hook in struct drm_plane_funcs. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026155934.125294-4-dakr@redhat.com
2022-11-16drm/arm/malidp: replace drm->dev_private with drm_to_malidp()Danilo Krummrich6-27/+25
Using drm_device->dev_private is deprecated. Since we've switched to devm_drm_dev_alloc(), struct drm_device is now embedded in struct malidp_drm, hence we can use container_of() to get the struct drm_device instance instead. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026155934.125294-3-dakr@redhat.com
2022-11-16drm/arm/malidp: use drmm_* to allocate driver structuresDanilo Krummrich2-13/+8
Use drm managed resources to allocate driver structures and get rid of the deprecated drm_dev_alloc() call and replace it with devm_drm_dev_alloc(). This also serves as preparation to get rid of drm_device->dev_private and to fix use-after-free issues on driver unload. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026155934.125294-2-dakr@redhat.com
2022-11-07drm/arm/hdlcd: remove calls to drm_mode_config_cleanup()Danilo Krummrich1-6/+13
drm_mode_config_init() simply calls drmm_mode_config_init(), hence cleanup is automatically handled through registering drm_mode_config_cleanup() with drmm_add_action_or_reset(). While at it, get rid of the deprecated drm_mode_config_init() and replace it with drmm_mode_config_init() directly. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026153431.72033-5-dakr@redhat.com
2022-11-07drm/arm/hdlcd: plane: use drm managed resourcesDanilo Krummrich1-12/+6
Use drm managed resource allocation (drmm_universal_plane_alloc()) in order to get rid of the explicit destroy hook in struct drm_plane_funcs. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026153431.72033-4-dakr@redhat.com
2022-11-07drm/arm/hdlcd: replace drm->dev_private with drm_to_hdlcd_priv()Danilo Krummrich3-9/+8
Using drm_device->dev_private is deprecated. Since we've switched to devm_drm_dev_alloc(), struct drm_device is now embedded in struct hdlcd_drm_private, hence we can use container_of() to get the struct drm_device instance instead. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026153431.72033-3-dakr@redhat.com
2022-11-07drm/arm/hdlcd: use drmm_* to allocate driver structuresDanilo Krummrich2-8/+5
Use drm managed resources to allocate driver structures and get rid of the deprecated drm_dev_alloc() call and replace it with devm_drm_dev_alloc(). This also serves as preparation to get rid of drm_device->dev_private and to fix use-after-free issues on driver unload. Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026153431.72033-2-dakr@redhat.com
Powered by cgit, Gruvboxed by Blaster4385.