aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dml2/dml21
AgeCommit message (Collapse)AuthorFilesLines
2024-11-11drm/amd/display: Require minimum VBlank size for stutter optimizationDillon Varone1-2/+9
If the nominal VBlank is too small, optimizing for stutter can cause the prefetch bandwidth to increase drasticaly, resulting in higher clock and power requirements. Only optimize if it is >3x the stutter latency. Reviewed-by: Austin Zheng <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 003215f962cdf2265f126a3f4c9ad20917f87fca) Cc: [email protected]
2024-09-18drm/amd/display: Fix underflow when setting underscan on DCN401Aurabindo Pillai1-1/+3
[WHY & HOW] When underscan is set through xrandr, it causes the stream destination rect to change in a way it becomes complicated to handle the calculations for subvp. Since this is a corner case, disable subvp when underscan is set. Fix the existing check that is supposed to catch this corner case by adding a check based on the parameters in the stream Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Dillon Varone <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-18drm/amd/display: Block timing sync for different output formats in pmoDillon Varone1-3/+5
[WHY & HOW] If the output format is different for HDMI TMDS signals, they are not synchronizable. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amd/display: Block timing sync for different signals in PMODillon Varone1-1/+2
PMO assumes that like timings can be synchronized, but DC only allows this if the signal types match. Reviewed-by: Austin Zheng <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-09-02drm/amd/display: re-enable Dynamic ODM policySamson Tam1-2/+1
[Why] Previous disable ODM policy due to underflow issue with sharpener. Issue is resolved after updating sharpening policy to apply to both windowed and fullscreen video [How] Remove sharpness check disabling Dynamic ODM policy Reviewed-by: Martin Leung <[email protected]> Signed-off-by: Samson Tam <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-27drm/amd/display: add back quality EASF and ISHARP and dc dependency changesSamson Tam1-1/+10
[Why] Addressed previous issues with quality changes and new issues due to rolling back quality changes. [How] This reverts commit f9e6759888866748f31b6b6c2142a481d587f51f, fixes merge conflicts, and fixed some formatting errors. Store current sharpness level for each pregen table to minimize calculating sharpness table every time. Disable dynamic ODM when sharpness is enabled. Reviewed-by: Jun Lei <[email protected]> Signed-off-by: Samson Tam <[email protected]> Signed-off-by: Zaeem Mohamed <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-27drm/amd/display: Resolve Coverity IssuesDaniel Sa5-14/+15
[WHY] Remove coverity issues that were originally ignored. [HOW] Ran coverity locally on driver, used output report to find existing coverity issues, resolved them Reviewed-by: Nicholas Choi <[email protected]> Signed-off-by: Daniel Sa <[email protected]> Signed-off-by: Zaeem Mohamed <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-27drm/amd/display: Fix MS/MP mismatches in dml21 for dcn401Dillon Varone2-16/+36
[WHY] Prefetch calculations did not guarantee that bandwidth required in mode support was less than mode programming which can cause failures. [HOW] Fix bandwidth calculations to assume fixed times for OTO schedule, and choose which schedule to use based on time to fetch pixel data. Reviewed-by: Jun Lei <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Signed-off-by: Zaeem Mohamed <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-23drm/amd/display: Make core_dcn4_ip_caps_base staticJinjie Ruan1-1/+1
The sparse tool complains as follows: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4.c:12:28: warning: symbol 'core_dcn4_ip_caps_base' was not declared. Should it be static? This symbol is not used outside of dcn35_hubp.c, so marks it static. And do not want to change it, so mark it const. Signed-off-by: Jinjie Ruan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-23drm/amd/display: Make core_dcn4_g6_temp_read_blackout_table staticJinjie Ruan1-1/+2
The sparse tool complains as follows: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:6853:56: warning: symbol 'core_dcn4_g6_temp_read_blackout_table' was not declared. Should it be static? This symbol is not used outside of dml2_core_dcn4_calcs.c, so marks it static. And not want to change it, so mark it const. Signed-off-by: Jinjie Ruan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-20drm/amd/display: DML2.1 Reintegration for Various FixesAustin Zheng13-282/+1009
[Why and How] DML2.1 reintegration for several fixes and updates to the DML code. Reviewed-by: Dillon Varone <[email protected]> Signed-off-by: Austin Zheng <[email protected]> Signed-off-by: Roman Li <roman.li@amd Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-13drm/amd/display: apply vmin optimization even if it doesn't reach vmin levelWenjing Liu2-7/+20
[why] Based on power measurement result, in most cases when display clock is higher than Vmin display clock, lowering display clock using dynamic ODM will improve overall power consumption by 0 to 4 watts even if we can't reach Vmin. [how] Allow vmin optimization applied even if dispclk can't reach Vmin. Reviewed-by: Austin Zheng <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Signed-off-by: Tom Chung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-13drm/amd/display: fix minor coding errors where dml21 phase 5 uses wrong ↵Wenjing Liu1-2/+2
variables [why & how] There is a coding error which causes incorrect variables to be assigned in DML21 phase 5. Reviewed-by: Austin Zheng <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Signed-off-by: Tom Chung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-13drm/amd/display: remove extraneous ; after statementsColin Ian King3-4/+4
There are a several statements with two following semicolons, replace these with just one semicolon. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-06drm/amd/display: Add DML2.1 option to disable DRR clamped P-State StrategiesDillon Varone3-3/+9
[WHY & HOW] When DRR is active with variable refresh rate, add the ability to block DRR clamped P-State strategies (such as SubVP). Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-06drm/amd/display: Force enable 3DLUT DMA check for dcn401 in DMLDillon Varone1-2/+4
[WHY] Currently TR0 (trip 0) is not properly budgeting for urgent latency in DML2.1. This results in overly aggressive prefetch schedules that are vulnerable to request return jitter, resulting in severe underflow at the start of the frame. [HOW] Forcing 3DLUT DMA check to enable causes urgent latency to be budgeted properly into the prefetch schedule, avoiding the vulnerability. Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-06drm/amd/display: Assume 32 bpp cursor in DML21Joshua Aberback1-12/+1
[Why] Cursor size can change dynamically at runtime without re-validation, so DML should calculate with the max size cursor to cover all cases. Reviewed-by: Dillon Varone <[email protected]> Signed-off-by: Joshua Aberback <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-06drm/amd/display: Disable SubVP if Hardware Rotation is UsedAustin Zheng1-1/+2
[Why and How] SubVP is not supported when hardware rotation is being used Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Austin Zheng <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-06drm/amd/display: fix a UBSAN warning in DML2.1Aurabindo Pillai1-44/+49
When programming phantom pipe, since cursor_width is explicity set to 0, this causes calculation logic to trigger overflow for an unsigned int triggering the kernel's UBSAN check as below: [ 40.962845] UBSAN: shift-out-of-bounds in /tmp/amd.EfpumTkO/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3312:34 [ 40.962849] shift exponent 4294967170 is too large for 32-bit type 'unsigned int' [ 40.962852] CPU: 1 PID: 1670 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu [ 40.962854] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F21 01/10/2024 [ 40.962856] Call Trace: [ 40.962857] <TASK> [ 40.962860] dump_stack_lvl+0x48/0x70 [ 40.962870] dump_stack+0x10/0x20 [ 40.962872] __ubsan_handle_shift_out_of_bounds+0x1ac/0x360 [ 40.962878] calculate_cursor_req_attributes.cold+0x1b/0x28 [amdgpu] [ 40.963099] dml_core_mode_support+0x6b91/0x16bc0 [amdgpu] [ 40.963327] ? srso_alias_return_thunk+0x5/0x7f [ 40.963331] ? CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport+0x18b8/0x2790 [amdgpu] [ 40.963534] ? srso_alias_return_thunk+0x5/0x7f [ 40.963536] ? dml_core_mode_support+0xb3db/0x16bc0 [amdgpu] [ 40.963730] dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.963906] ? srso_alias_return_thunk+0x5/0x7f [ 40.963909] ? dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.964078] core_dcn4_mode_support+0x72/0xbf0 [amdgpu] [ 40.964247] dml2_top_optimization_perform_optimization_phase+0x1d3/0x2a0 [amdgpu] [ 40.964420] dml2_build_mode_programming+0x23d/0x750 [amdgpu] [ 40.964587] dml21_validate+0x274/0x770 [amdgpu] [ 40.964761] ? srso_alias_return_thunk+0x5/0x7f [ 40.964763] ? resource_append_dpp_pipes_for_plane_composition+0x27c/0x3b0 [amdgpu] [ 40.964942] dml2_validate+0x504/0x750 [amdgpu] [ 40.965117] ? dml21_copy+0x95/0xb0 [amdgpu] [ 40.965291] ? srso_alias_return_thunk+0x5/0x7f [ 40.965295] dcn401_validate_bandwidth+0x4e/0x70 [amdgpu] [ 40.965491] update_planes_and_stream_state+0x38d/0x5c0 [amdgpu] [ 40.965672] update_planes_and_stream_v3+0x52/0x1e0 [amdgpu] [ 40.965845] ? srso_alias_return_thunk+0x5/0x7f [ 40.965849] dc_update_planes_and_stream+0x71/0xb0 [amdgpu] Fix this by adding a guard for checking cursor width before triggering the size calculation. Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-08-06drm/amd/display: Check UnboundedRequestEnabled's valueAlex Hung1-1/+1
CalculateSwathAndDETConfiguration_params_st's UnboundedRequestEnabled is a pointer (i.e. dml_bool_t *UnboundedRequestEnabled), and thus p->UnboundedRequestEnabled checks its address, not bool value. To check value, *p->UnboundedRequestEnabled is used instead. This fixes 1 REVERSE_INULL issue reported by Coverity. Signed-off-by: Alex Hung <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-27drm/amd/display: Check null values from functionsAlex Hung1-0/+8
Functions get_per_method_common_meta and get_expanded_strategy_list can return null and thus it is necessary to check their returned values before dereferencing. This fixes 3 NULL_RETURNS issues reported by Coverity. Signed-off-by: Alex Hung <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-27drm/amd/display: Add option to disable unbounded req in DML21Alvin Lee1-0/+5
Use debug option for disabling unbounded req in DML21 Signed-off-by: Alvin Lee <[email protected]> Reviewed-by: Austin Zheng <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-27drm/amd/display: roll back quality EASF and ISHARP and dc dependency changesSamson Tam1-8/+0
[Why] Seeing several regressions related to quality EASF and ISHARP changes and removing dc dependency changes. [How] Roll back SPL changes Signed-off-by: Samson Tam <[email protected]> Reviewed-by: Martin Leung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-25drm/amd/display: remove unneeded semicolonJiapeng Chong1-3/+3
No functional modification involved. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:481:2-3: Unneeded semicolon. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3783:168-169: Unneeded semicolon. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3782:166-167: Unneeded semicolon. Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9575 Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-25drm/amd/display: use swap() in sort()Jiapeng Chong1-6/+2
Use existing swap() function rather than duplicating its implementation. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_pmo/dml2_pmo_dcn3.c:17:29-30: WARNING opportunity for swap(). Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9573 Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-25drm/amd/display: Reapply 2fde4fdddc1fNathan Chancellor1-1/+1
Commit 2563391e57b5 ("drm/amd/display: DML2.1 resynchronization") blew away the compiler warning fix from commit 2fde4fdddc1f ("drm/amd/display: Avoid -Wenum-float-conversion in add_margin_and_round_to_dfs_grainularity()"), causing the warning to reappear. drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_dcn4.c:183:58: error: arithmetic between enumeration type 'enum dentist_divider_range' and floating-point type 'double' [-Werror,-Wenum-float-conversion] 183 | divider = (unsigned int)(DFS_DIVIDER_RANGE_SCALE_FACTOR * (vco_freq_khz / clock_khz)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated. Apply the fix again to resolve the warning. Fixes: 2563391e57b5 ("drm/amd/display: DML2.1 resynchronization") Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-25drm/amd/display: Fix spelling mistake "tolarance" -> "tolerance"Colin Ian King1-1/+1
There is a spelling mistake in a dml2_printf message. Fix it. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Various DML2 fixes for FAMS2Dillon Varone2-2/+1
The disable fams2 operation was reworked, but some of the old code remained. This commit removes the disable_fams2_drr from the dml2_stream_parameters. Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: rename dcn401_soc to dcn4_variant_a_socAurabindo Pillai2-2/+2
To distinguish between different soc with same DCN IP, use variants starting with alphabets Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: rename dcn3/dcn4 to more sound termsAurabindo Pillai10-292/+292
Use more accurate names to refer to the asic architecture. dcn3 in DML actually refers to DCN32 and DCN321, so rename it to dcn32x dcn4 refers to any DCN4x soc., and hence rename dcn4 to dcn4x Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Check if Mode is Supported Before Returning ResultAustin Zheng1-1/+2
[Why] Even if the mode is not supported dml2_check_mode_supported() would still return true. This causes an unsupported mode to be programmed. [How] Check if the mode is supported or not and return the proper result. Reviewed-by: Chaitanya Dhere <[email protected]> Signed-off-by: Austin Zheng <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Fix visual confirm bug for SubVPRyan Seto3-6/+31
[Why] Visual confirm was incorrect on dual monitor SubVP setup [How] Adjusted p_state assignment for dual monitor SubVP setup Signed-off-by: Ryan Seto <[email protected]> Reviewed-by: Chaitanya Dhere <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Remove ASSERT if significance is zero in math_ceil2Rodrigo Siqueira1-2/+0
In the DML math_ceil2 function, there is one ASSERT if the significance is equal to zero. However, significance might be equal to zero sometimes, and this is not an issue for a ceil function, but the current ASSERT will trigger warnings in those cases. This commit removes the ASSERT if the significance is equal to zero to avoid unnecessary noise. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Chaitanya Dhere <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Remove unused dml2_core_ip_params structRodrigo Siqueira1-78/+0
Acked-by: Jerry Zuo <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Export additional FAMS2 global configuration options from DMLDillon Varone3-72/+89
[WHY&HOW] Some global configuration options were previously hardcoded in DC, now they are exported by DML and sent to FW. Reviewed-by: Martin Leung <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Increase array size of dummy_booleanAlex Hung1-1/+1
[WHY] dml2_core_shared_mode_support and dml_core_mode_support access the third element of dummy_boolean, i.e. hw_debug5 = &s->dummy_boolean[2], when dummy_boolean has size of 2. Any assignment to hw_debug5 causes an OVERRUN. [HOW] Increase dummy_boolean's array size to 3. This fixes 2 OVERRUN issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Add P-State Keepout to dcn401 Global SyncDillon Varone1-0/+1
[WHY&HOW] OTG has new functionality to allow P-State relative to VStartup. Keepout region for this should be configured based on DML outputs same as other global sync params. Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Issue with 3 or more mcaches per surfaceNevenko Stupar1-11/+11
[Why & How] Current logic in mcache admissibility check has flaw if calculated number of maches are 3 or more per surface, so sometimes the check may pass when it should fail, and sometimes may fail when it should pass, fix the issue and also adding additional check to make sure that required number of mcaches per surface cannot be higher than number of pipes + 1, used on that surface. Reviewed-by: Chaitanya Dhere <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Nevenko Stupar <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Add blanked streams override to DML2.1Dillon Varone1-0/+7
[WHY] DML2.1 currently has no concept of a "blanked" stream. For cases like DPMS off, things like UCLK p-state is always allowed, so PMO is not required to optimize for it. [HOW] Add flag to DML2.1 display configuration to indicate all streams are blanked, so certain operations and optimizations can be skipped for optimal programming when displays are blanked. Reviewed-by: Chaitanya Dhere <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: DML2.1 resynchronizationChaitanya Dhere42-1666/+566
July update for DML2.1 library from hardware team targeting DCN401 Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Chaitanya Dhere <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Initialize denominators' default to 1Alex Hung1-2/+2
[WHAT & HOW] Variables used as denominators and maybe not assigned to other values, should not be 0. Change their default to 1 so they are never 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Disable subvp based on HW cursor requirementAlvin Lee1-1/+1
[Description] - There are situations where HW cursor is required - In these scenarios we should disable subvp based on the HW cursor requirement Reviewed-by: Dillon Varone <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: apply vmin optimization even if it doesn't reach vmin levelWenjing Liu2-7/+20
[why] Based on power measurement result, in most cases when display clock is higher than Vmin display clock, lowering display clock using dynamic ODM will improve overall power consumption by 0 to 4 watts even if we can't reach Vmin. [how] Allow vmin optimization applied even if dispclk can't reach Vmin. Reviewed-by: Jun Lei <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: Added logging for automated DPM testingRyan Seto3-0/+30
[Why] Added clock logs to automate DPM testing [How] Added logs and helper functions to output clocks Co-authored-by: Ryan Seto <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Ryan Seto <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-23drm/amd/display: quality improvements for EASF and ISHARPSamson Tam1-0/+8
[Why] Update coefficients and LUT tables for scaler and sharpener to improve quality and support different use cases (SDR/HDR) [How] Move scaler coefficients to new file dc_spl_scl_easf_filters.c Remove older coefficients file dc_sp_scl_filters_old.c Update default taps for EASF support Update LLS policy for DON'T CARE case Update cositing offset from 0.5 to 0.25 Add support to adjust sharpness based on level, use case, and scaling ratio ( using discrete levels ) Apply sharpness to all RGB surfaces and both NV12 and P010 video ( in fullscreen only ). Upscale and 1:1 ratios only Enable scaler when sharpening 1:1 ratios Add support for coefficients that are in S1.10 format (convert to S1.12 format) Reviewed-by: Jun Lei <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Samson Tam <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-02drm/amd/display: Fix warning comparing pointer to 0Jiapeng Chong1-1/+1
Avoid pointer type value compared with 0 to make code clear. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_factory.c:14:12-13: WARNING comparing pointer to 0. Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9458 Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-02drm/amd/display: Fix warning comparing pointer to 0Jiapeng Chong1-1/+1
Avoid pointer type value compared with 0 to make code clear. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_factory.c:24:12-13: WARNING comparing pointer to 0. Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9458 Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-02drm/amd/display: Fix warning comparing pointer to 0Jiapeng Chong1-1/+1
Avoid pointer type value compared with 0 to make code clear. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_mcg/dml2_mcg_factory.c:19:12-13: WARNING comparing pointer to 0. Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9458 Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-02drm/amd/display: Fix warning comparing pointer to 0Jiapeng Chong1-1/+1
Avoid pointer type value compared with 0 to make code clear. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_pmo/dml2_pmo_factory.c:31:12-13: WARNING comparing pointer to 0. Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9458 Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-02drm/amd/display: Fix unsigned comparison with less than zeroJiapeng Chong1-9/+6
The return value from the call to dml21_find_dc_pipes_for_plane() is int. However, the return value is being assigned to an unsigned int variable 'num_pipes', the condition if(num_pipes <= 0) is not rigorous enough, so making 'num_pipes' an int. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:318:6-15: WARNING: Unsigned expression compared with zero: num_pipes <= 0. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:360:6-15: WARNING: Unsigned expression compared with zero: num_pipes <= 0. Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9454 Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.