aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/amdgpu_dm
AgeCommit message (Collapse)AuthorFilesLines
2024-11-11drm/amd/display: Adjust VSDB parser for replay featureRodrigo Siqueira1-1/+1
At some point, the IEEE ID identification for the replay check in the AMD EDID was added. However, this check causes the following out-of-bounds issues when using KASAN: [ 27.804016] BUG: KASAN: slab-out-of-bounds in amdgpu_dm_update_freesync_caps+0xefa/0x17a0 [amdgpu] [ 27.804788] Read of size 1 at addr ffff8881647fdb00 by task systemd-udevd/383 ... [ 27.821207] Memory state around the buggy address: [ 27.821215] ffff8881647fda00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821224] ffff8881647fda80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821234] >ffff8881647fdb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 27.821243] ^ [ 27.821250] ffff8881647fdb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 27.821259] ffff8881647fdc00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821268] ================================================================== This is caused because the ID extraction happens outside of the range of the edid lenght. This commit addresses this issue by considering the amd_vsdb_block size. Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit b7e381b1ccd5e778e3d9c44c669ad38439a861d8) Cc: stable@vger.kernel.org
2024-11-11drm/amd/display: Fix Panel Replay not update screen correctlyTom Chung2-57/+59
[Why] In certain use case such as KDE login screen, there will be no atomic commit while do the frame update. If the Panel Replay enabled, it will cause the screen not updated and looks like system hang. [How] Delay few atomic commits before enabled the Panel Replay just like PSR. Fixes: be64336307a6c ("drm/amd/display: Re-enable panel replay feature") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3686 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3682 Tested-By: Corey Hickey <bugfood-c@fatooh.org> Tested-By: James Courtier-Dutton <james.dutton@gmail.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ca628f0eddd73adfccfcc06b2a55d915bca4a342) Cc: stable@vger.kernel.org # 6.11+
2024-11-11drm/amd/display: Change some variable name of psrTom Chung4-14/+14
Panel Replay feature may also use the same variable with PSR. Change the variable name and make it not specify for PSR. Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit c7fafb7a46b38a11a19342d153f505749bf56f3e) Cc: stable@vger.kernel.org # 6.11+
2024-11-04drm/amd/display: Fix brightness level not retained over rebootTom Chung1-0/+15
[Why] During boot up and resume the DC layer will reset the panel brightness to fix a flicker issue. It will cause the dm->actual_brightness is not the current panel brightness level. (the dm->brightness is the correct panel level) [How] Set the backlight level after do the set mode. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Fixes: d9e865826c20 ("drm/amd/display: Simplify brightness initialization") Reported-by: Mark Herbert <mark.herbert42@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3655 Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 7875afafba84817b791be6d2282b836695146060) Cc: stable@vger.kernel.org
2024-10-22drm/amd/display: temp w/a for DP Link Layer complianceAurabindo Pillai1-0/+13
[Why&How] Disabling P-State support on full updates for DCN401 results in introducing additional communication with SMU. A UCLK hard min message to SMU takes 4 seconds to go through, which was due to DCN not allowing pstate switch, which was caused by incorrect value for TTU watermark before blanking the HUBP prior to DPG on for servicing the test request. Fix the issue temporarily by disallowing pstate changes for compliance test while test request handler is reworked for a proper fix. Fixes: 67ea53a4bd9d ("drm/amd/display: Disable DCN401 UCLK P-State support on full updates") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 8a79f7cdbb41bb0ddfd4d7662b4428d4a9d5306d) Cc: stable@vger.kernel.org
2024-10-22drm/amd/display: temp w/a for dGPU to enter idle optimizationsAurabindo Pillai1-1/+2
[Why&How] vblank immediate disable currently does not work for all asics. On DCN401, the vblank interrupts never stop coming, and hence we never get a chance to trigger idle optimizations. Add a workaround to enable immediate disable only on APUs for now. This adds a 2-frame delay for triggering idle optimization, which is a negligible overhead. Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs") Fixes: e45b6716de4b ("drm/amd/display: use a more lax vblank enable policy for DCN35+") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 9b47278cec98e9894adf39229e91aaf4ab9140c5) Cc: stable@vger.kernel.org
2024-10-07drm/amd/display: fix hibernate entry for DCN35+Hamza Mahfooz1-3/+4
Since, two suspend-resume cycles are required to enter hibernate and, since we only need to enable idle optimizations in the first cycle (which is pretty much equivalent to s2idle). We can check in_s0ix, to prevent the system from entering idle optimizations before it actually enters hibernate (from display's perspective). Also, call dc_set_power_state() before dc_allow_idle_optimizations(), since it's safer to do so because dc_set_power_state() writes to DMUB. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 2fe79508d9c393bb9931b0037c5ecaee09a8dc39) Cc: stable@vger.kernel.org # 6.10+
2024-10-01drm/amd/display: Fix system hang while resume with TBT monitorTom Chung1-0/+6
[Why] Connected with a Thunderbolt monitor and do the suspend and the system may hang while resume. The TBT monitor HPD will be triggered during the resume procedure and call the drm_client_modeset_probe() while struct drm_connector connector->dev->master is NULL. It will mess up the pipe topology after resume. [How] Skip the TBT monitor HPD during the resume procedure because we currently will probe the connectors after resume by default. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 453f86a26945207a16b8f66aaed5962dc2b95b85) Cc: stable@vger.kernel.org
2024-10-01drm/amd/display: Enable idle workqueue for more IPS modesLeo Li1-1/+2
[Why] There are more IPS modes other than DMUB_IPS_ENABLE that enables IPS. We need to enable the hotplug detect idle workqueue for those modes as well. [How] Modify the if condition to initialize the workqueue in all IPS modes except for DMUB_IPS_DISABLE_ALL. Fixes: 65444581a4ae ("drm/amd/display: Determine IPS mode by ASIC and PMFW versions") Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 181db30bcfed097ecc680539b1eabe935c11f57f) Cc: stable@vger.kernel.org
2024-10-01drm/amd/display: Add HDR workaround for specific eDPAlex Hung2-1/+14
[WHY & HOW] Some eDP panels suffer from flicking when HDR is enabled in KDE. This quirk works around it by skipping VSC that is incompatible with eDP panels. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3151 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4d4257280d7957727998ef90ccc7b69c7cca8376) Cc: stable@vger.kernel.org
2024-10-01drm/amd/display: Restore Optimized pbn Value if Failed to Disable DSCFangzhi Zuo1-4/+13
Existing last step of dsc policy is to restore pbn value under minimum compression when try to greedily disable dsc for a stream failed to fit in MST bw. Optimized dsc params result from optimization step is not necessarily the minimum compression, therefore it is not correct to restore the pbn under minimum compression rate. Restore the pbn under minimum compression instead of the value from optimized pbn could result in the dsc params not correct at the modeset where atomic_check failed due to not enough bw. One or more monitors connected could not light up in such case. Restore the optimized pbn value, instead of using the pbn value under minimum compression. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 352c3165d2b75030169e012461a16bcf97f392fc) Cc: stable@vger.kernel.org
2024-09-18drm/amd/display: Allow backlight to go below `AMDGPU_DM_DEFAULT_MIN_BACKLIGHT`Mario Limonciello1-1/+1
The issue with panel power savings compatibility below `AMDGPU_DM_DEFAULT_MIN_BACKLIGHT` happens at `AMDGPU_DM_DEFAULT_MIN_BACKLIGHT` as well. That issue will be fixed separately, so don't prevent the backlight brightness from going that low. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/amd-gfx/be04226a-a9e3-4a45-a83b-6d263c6557d8@t-8ch.de/T/#m400dee4e2fc61fe9470334d20a7c8c89c9aef44f Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amdgpu: explicitely set the AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS flagChristian König2-0/+2
Instead of having that in the amdgpu_bo_pin() function applied for all pinned BOs. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Update IPS default mode for DCN35/DCN351Roman Li1-17/+33
[WHY] RCG state of IPX in idle is more stable for DCN351 and some variants of DCN35 than IPS2. [HOW] Rework dm_get_default_ips_mode() to specify default per ASIC and update DCN35/DCN351 defaults accordingly. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Validate backlight caps are saneMario Limonciello1-0/+16
Currently amdgpu takes backlight caps provided by the ACPI tables on systems as is. If the firmware sets maximums that are too low this means that users don't get a good experience. To avoid having to maintain a quirk list of such systems, do a sanity check on the values. Check that the spread is at least half of the values that amdgpu would use if no ACPI table was found and if not use the amdgpu defaults. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3020 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-09-18drm/amd/display: Add HDMI DSC native YCbCr422 supportLeo Ma1-2/+2
[WHY && HOW] For some HDMI OVT timing, YCbCr422 encoding fails at the DSC bandwidth check. The root cause is our DSC policy for timing doesn't account for HDMI YCbCr422 native support. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Add dmub hpd sense callbackRoman Li2-1/+21
[WHY] HPD sense notification has been implemented in DMUB, which can occur during low power states and need to be notified from firmware to driver. [HOW] Define callback and register new HPD sense notification. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-17Merge tag 'amd-drm-next-6.12-2024-09-13' of ↵Dave Airlie2-2/+13
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.12-2024-09-13: amdgpu: - GPUVM sync fixes - kdoc fixes - Misc spelling mistakes - Add some raven GFXOFF quirks - Use clamp helper - DC fixes - JPEG fixes - Process isolation fix - Queue reset fix - W=1 cleanup - SMU14 fixes - JPEG fixes amdkfd: - Fetch cacheline info from IP discovery - Queue reset fix - RAS fix - Document SVM events - CRIU fixes - Race fix in dma-buf handling drm: - dma-buf fd race fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240913134139.2861073-1-alexander.deucher@amd.com
2024-09-11drm/amd/display: Add all planes on CRTC to state for overlay cursorLeo Li1-0/+11
[Why] DC has a special commit path for native cursor, which use the built-in cursor pipe within DCN planes. This update path does not require all enabled planes to be added to the list of surface updates sent to DC. This is not the case for overlay cursor; it uses the same path as MPO commits. This update path requires all enabled planes to be added to the list of surface updates sent to DC. Otherwise, DC will disable planes not inside the list. [How] If overlay cursor is needed, add all planes on the same CRTC as this cursor to the atomic state. This is already done for non-cursor planes (MPO), just before the added lines. Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-11Merge tag 'amd-drm-next-6.12-2024-09-06' of ↵Dave Airlie4-44/+168
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.12-2024-09-06: amdgpu: - IPS updates - Post divider fix - DML2 updates - Misc static checker fixes - DCN 3.5 fixes - Replay fixes - DMCUB updates - SWSMU fixes - DP MST fixes - Add debug flag for per queue resets - devcoredump updates - SR-IOV fixes - MES fixes - Always allocate cleared VRAM for GEM - Pipe reset for GC 9.4.3 - ODM policy fixes - Per queue reset support for GC 10 - Per queue reset support for GC 11 - Per queue reset support for GC 12 - Display flickering fixes - MPO fixes - Display sharpening updates amdkfd: - SVM fix for IH for APUs Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240906211008.3072097-1-alexander.deucher@amd.com
2024-09-10drm/amd/display: Do not reset planes based on crtc zpos_changedLeo Li1-1/+1
[Why] drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of it's assigned planes changes zpos, or is removed/added from it. To have amdgpu_dm request a plane reset on this is too broad. For example, if only the cursor plane was moved from one crtc to another, the crtc's zpos_changed will be set to true. But that does not mean that the underlying primary plane requires a reset. [How] Narrow it down so that only the plane that has a change in zpos will require a reset. As a future TODO, we can further optimize this by only requiring a reset on z-order change. Z-order is different from z-pos, since a zpos change doesn't necessarily mean the z-ordering changed, and DC should only require a reset if the z-ordering changed. For example, the following zpos update does not change z-ordering: Plane A: zpos 2 -> 3 Plane B: zpos 1 -> 2 => Plane A is still on top of plane B: no reset needed Whereas this one does change z-ordering: Plane A: zpos 2 -> 1 Plane B: zpos 1 -> 2 => Plane A changed from on top, to below plane B: reset needed Fixes: 38e0c3df6dbd ("drm/amd/display: Move PRIMARY plane zpos higher") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569 Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Fix spelling mistake "recompte" -> "recompute"Colin Ian King1-1/+1
There is a spelling mistake in a DRM_DEBUG_DRIVER message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Lock DC and exit IPS when changing backlightLeo Li1-1/+12
Backlight updates require aux and/or register access. Therefore, driver needs to disallow IPS beforehand. So, acquire the dc lock before calling into dc to update backlight - we should be doing this regardless of IPS. Then, while the lock is held, disallow IPS before calling into dc, then allow IPS afterwards (if it was previously allowed). Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-30Merge tag 'drm-misc-next-2024-08-29' of ↵Dave Airlie1-23/+72
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: UAPI Changes: devfs: - support device numbers up to MINORBITS limit Core Changes: ci: - increase job timeout devfs: - use XArray for minor ids displayport: - mst: GUID improvements docs: - add fixes and cleanups panic: - optionally display QR code Driver Changes: amdgpu: - faster vblank disabling - GUID improvements gm12u320 - convert to struct drm_edid host1x: - fix syncpoint IRQ during resume - use iommu_paging_domain_alloc() imx: - ipuv3: convert to struct drm_edid omapdrm: - improve error handling panel: - add support for BOE TV101WUM-LL2 plus DT bindings - novatek-nt35950: improve error handling - nv3051d: improve error handling - panel-edp: add support for BOE NE140WUM-N6G; revert support for SDC ATNA45AF01 - visionox-vtdr6130: improve error handling; use devm_regulator_bulk_get_const() renesas: - rz-du: add support for RZ/G2UL plus DT bindings sti: - convert to struct drm_edid tegra: - gr3d: improve PM domain handling - convert to struct drm_edid Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240829144654.GA145538@linux.fritz.box
2024-08-29drm/amd/display: Determine IPS mode by ASIC and PMFW versionsLeo Li1-1/+25
[Why] DCN IPS interoperates with other system idle power features, such as Zstates. On DCN35, there is a known issue where system Z8 + DCN IPS2 causes a hard hang. We observe this on systems where the SBIOS allows Z8. Though there is a SBIOS fix, there's no guarantee that users will get it any time soon, or even install it. A workaround is needed to prevent this from rearing its head in the wild. [How] For DCN35, check the pmfw version to determine whether the SBIOS has the fix. If not, set IPS1+RCG as the deepest possible state in all cases except for s0ix and display off (DPMS). Otherwise, enable all IPS Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-29drm/amdgpu/display: Fix a mistake in revert commitFangzhi Zuo1-1/+1
[why] It is to fix in try_disable_dsc() due to misrevert of commit 338567d17627 ("drm/amd/display: Fix MST BW calculation Regression") [How] Fix restoring minimum compression bw by 'max_kbps', instead of native bw 'stream_kbps' Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-29drm/amd/display: switch to guid_gen() to generate valid GUIDsJani Nikula1-11/+12
Instead of just smashing jiffies into a GUID, use guid_gen() to generate RFC 4122 compliant GUIDs. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-3-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-29drm/mst: switch to guid_t type for GUIDJani Nikula1-1/+1
The kernel has a guid_t type for GUIDs. Switch to using it, but avoid any functional changes here. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-27drm/amd/display: Add DSC Debug LogFangzhi Zuo3-39/+119
Add DSC log in each critical routines to facilitate debugging. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Fix Synaptics Cascaded Panamera DSC DeterminationFangzhi Zuo1-1/+1
Synaptics Cascaded Panamera topology needs to unconditionally acquire root aux for dsc decoding. Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: do not set traslate_by_source for DCN401 cursorAurabindo Pillai1-1/+4
translate_by_source need not be set for DCN401 onwards since cursor cursor composition comes after scaler in the hardware pipeline. Hence offset calculation has been reworked, and this setting is not necessary to be enabled anymore. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd: Introduce additional IPS debug flagsLeo Li1-0/+6
[Why] Idle power states (IPS) describe levels of power-gating within DCN. DM and DC is responsible for ensuring that we are out of IPS before any DCN programming happens. Any DCN programming while we're in IPS leads to undefined behavior (mostly hangs). Because IPS intersects with all display features, the ability to disable IPS by default while ironing out the known issues is desired. However, disabing it completely will cause important features such as s0ix entry to fail. Therefore, more granular IPS debug flags are desired. [How] Extend the dc debug mask bits to include the available list of IPS debug flags. All the flags should work as documented, with the exception of IPS_DISABLE_DYNAMIC. It requires dm changes which will be done in later changes. v2: enable docs and fix docstring format Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-23drm/amd/display: use a more lax vblank enable policy for older ASICsHamza Mahfooz1-8/+6
Ideally, we want to drop the legacy vblank enable for older ASICs. This should be possible now, since we can now specify how many frames we need to wait before disabling vblanking instead of being forced to either choose between no delay (which can still be buggy) and drm_vblank_offdelay (which is much longer by default than is required on AMD hardware). Suggested-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240822161856.174600-4-hamza.mahfooz@amd.com
2024-08-23drm/amd/display: use a more lax vblank enable policy for DCN35+Hamza Mahfooz1-1/+6
Ideally, we want to enable immediate vblank disable, when possible and we should be able to do so on DCN35+, if PSR isn't supported by a given CRTC. Suggested-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240822161856.174600-3-hamza.mahfooz@amd.com
2024-08-23drm/amd/display: use new vblank enable policy for DCN35+Hamza Mahfooz1-11/+24
Hook up drm_crtc_vblank_on_config() in amdgpu_dm. So, that we can enable PSR and other static screen optimizations more quickly, while avoiding stuttering issues that are accompanied by the following dmesg error: [drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3 This also allows us to mimic how vblanking is handled by the Windows amdgpu driver. Specifically, we wait two idle frames before disabling the vblank timer there. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240822161856.174600-2-hamza.mahfooz@amd.com
2024-08-23drm/amd/display: avoid using null object of framebufferMa Ke1-2/+7
Instead of using state->fb->obj[0] directly, get object from framebuffer by calling drm_gem_fb_get_obj() and return error code when object is null to avoid using null object of framebuffer. Fixes: 5d945cbcd4b1 ("drm/amd/display: Create a file dedicated to planes") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Fix MST BW calculation RegressionFangzhi Zuo2-9/+27
[Why & How] Revert commit 8b2cb32cf0c6 ("drm/amd/display: FEC overhead should be checked once for mst slot nums") Because causes bw calculation regression Cc: mario.limonciello@amd.com Cc: alexander.deucher@amd.com Reported-by: jirislaby@kernel.org Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3495 Closes: https://bugzilla.suse.com/show_bug.cgi?id=1228093 Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Add null check for 'afb' in ↵Srinivasan Shanmugam1-1/+2
amdgpu_dm_plane_handle_cursor_update (v2) This commit adds a null check for the 'afb' variable in the amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was assumed to be null, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Changes since v1: - Moved the null check for 'afb' to the line where 'afb' is used. (Alex) Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Co-developed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Add null check for 'afb' in amdgpu_dm_update_cursor (v2)Srinivasan Shanmugam1-1/+2
This commit adds a null check for the 'afb' variable in the amdgpu_dm_update_cursor function. Previously, 'afb' was assumed to be null at line 8388, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Changes since v1: - Moved the null check for 'afb' to the line where 'afb' is used. (Alex) Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8433 amdgpu_dm_update_cursor() error: we previously assumed 'afb' could be null (see line 8388) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Co-developed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd: Use a constant format string for amdgpu_ucode_requestArnd Bergmann1-2/+2
Multiple files in amdgpu call amdgpu_ucode_request() with a fw_name variable that the compiler cannot check for being a valid format string, as seen by enabling the (default-disabled) -Wformat-security option: drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c: In function 'amdgpu_mes_init_microcode': drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1517:61: error: format not a string literal and no format arguments [-Werror=format-security] 1517 | r = amdgpu_ucode_request(adev, &adev->mes.fw[pipe], fw_name); | ^~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c: In function 'amdgpu_uvd_sw_init': drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:263:9: error: format not a string literal and no format arguments [-Werror=format-security] 263 | r = amdgpu_ucode_request(adev, &adev->uvd.fw, fw_name); | ^ drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c: In function 'amdgpu_vce_sw_init': drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c:161:9: error: format not a string literal and no format arguments [-Werror=format-security] 161 | r = amdgpu_ucode_request(adev, &adev->vce.fw, fw_name); | ^ drivers/gpu/drm/amd/amdgpu/amdgpu_umsch_mm.c: In function 'amdgpu_umsch_mm_init_microcode': drivers/gpu/drm/amd/amdgpu/amdgpu_umsch_mm.c:590:9: error: format not a string literal and no format arguments [-Werror=format-security] 590 | r = amdgpu_ucode_request(adev, &adev->umsch_mm.fw, fw_name); | ^ drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c: In function 'amdgpu_cgs_get_firmware_info': drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:417:72: error: format not a string literal and no format arguments [-Werror=format-security] 417 | err = amdgpu_ucode_request(adev, &adev->pm.fw, fw_name); | ^~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: In function 'load_dmcu_fw': drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:2221:9: error: format not a string literal and no format arguments [-Werror=format-security] 2221 | r = amdgpu_ucode_request(adev, &adev->dm.fw_dmcu, fw_name_dmcu); | ^ drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: In function 'dm_init_microcode': drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5147:9: error: format not a string literal and no format arguments [-Werror=format-security] 5147 | r = amdgpu_ucode_request(adev, &adev->dm.dmub_fw, fw_name_dmub); | ^ Change these all to use a "%s" format with the actual name as an argument, to let the compiler prove this to be correct. Fixes: e5a7d047f41b ("drm/amd: Use `amdgpu_ucode_*` helpers for CGS") Fixes: 52215e2a5d4a ("drm/amd: Use `amdgpu_ucode_*` helpers for VCE") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: fix s2idle entry for DCN3.5+Hamza Mahfooz1-0/+3
To be able to get to the lowest power state when suspending systems with DCN3.5+, we must be in IPS before the display hardware is put into D3cold. So, to ensure that the system always reaches the lowest power state while suspending, force systems that support IPS to enter idle optimizations before entering D3cold. Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Skip Recompute DSC Params if no Stream on LinkFangzhi Zuo1-0/+3
[why] Encounter NULL pointer dereference uner mst + dsc setup. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 [how] dsc recompute should be skipped if no mode change detected on the new request. If detected, keep checking whether the stream is already on current state or not. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Re-enable panel replay featureTom Chung1-12/+8
[Why & How] Fixed the replay issues and now re-enable the panel replay feature. Reported-by: Arthur Borsboom <arthurborsboom@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344 Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-02Revert "drm/amd: Add power_saving_policy drm property to eDP connectors"Hamza Mahfooz2-49/+5
This reverts commit 9d8c094ddab05db88d183ba82e23be807848cad8. It was merged without meeting userspace requirements. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240802145946.48073-2-hamza.mahfooz@amd.com
2024-07-29Merge drm/drm-next into drm-misc-nextThomas Zimmermann12-469/+1664
Backmerging to get a late RC of v6.10 before moving into v6.11. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-07-27drm/amd/display: Reset VRR config during resumeTom Chung1-1/+5
[Why] After resume the system, the new_crtc_state->vrr_infopacket does not synchronize with the current state. It will affect the update_freesync_state_on_stream() does not update the state correctly. The previous patch causes a PSR SU regression that cannot let panel go into self-refresh mode. [How] Reset the VRR config during resume to force update the VRR config later. Fixes: eb6dfbb7a9c6 ("drm/amd/display: Reset freesync config before update new state") Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: sync dmub output event type.Charlene Liu1-0/+1
[why] dmubfw added a new event type, update amdgpu to avoid "notify type 6 invalid" Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: Check null pointers before using themAlex Hung1-1/+2
[WHAT & HOW] dc_link is null checked previously in the same function, indicating it might be null as reported by Coverity. This fixes 1 FORWARD_NULL issue reported by Coverity. Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: Run idle optimizations at end of vblank handlerLeo Li1-3/+9
[Why & How] 1. After allowing idle optimizations, hw programming is disallowed. 2. Before hw programming, we need to disallow idle optimizations. Otherwise, in scenario 1, we will immediately kick hw out of idle optimizations with register access. Scenario 2 is less of a concern, since any register access will kick hw out of idle optimizations. But we'll do it early for correctness. Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: Let drm_crtc_vblank_on/off manage interruptsLeo Li2-37/+47
[Why] We manage interrupts for CRTCs in two places: 1. In manage_dm_interrupts(), when CRTC get enabled or disabled 2. When drm_vblank_get/put() starts or kills the vblank counter, calling into amdgpu_dm_crtc_set_vblank() The interrupts managed by these twp places should be identical. [How] Since manage_dm_interrupts() already use drm_crtc_vblank_on/off(), just move all CRTC interrupt management into amdgpu_dm_crtc_set_vblank(). This has the added benefit of disabling all CRTC and HUBP interrupts when there are no vblank requestors. Note that there is a TODO item - unchanged from when it was first introduced - to properly identify the HUBP instance from the OTG instance, rather than just assume direct mapping. Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Powered by cgit, Gruvboxed by Blaster4385.