| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Let the kmemdup_array() take care about multiplication and possible
overflows.
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
|
|
In order to gain the bounds-checking coverage that __counted_by provides
to flexible-array members at run-time via CONFIG_UBSAN_BOUNDS (for array
indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions),
we must make sure that the counter member, in this particular case `num`,
is updated before the first access to the flex-array member, in this
particular case array `hws`. See below:
commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") introduced `__counted_by` for `struct clk_hw_onecell_data`
together with changes to relocate some of assignments of counter `num`
before `hws` is accessed:
include/linux/clk-provider.h:
1380 struct clk_hw_onecell_data {
1381 unsigned int num;
1382 struct clk_hw *hws[] __counted_by(num);
1383 };
However, this structure is used as a member in other structs, in this
case in `struct visconti_pll_provider`:
drivers/clk/visconti/pll.h:
16 struct visconti_pll_provider {
17 void __iomem *reg_base;
18 struct device_node *node;
19
20 /* Must be last */
21 struct clk_hw_onecell_data clk_data;
22 };
Hence, we need to move the assignments to `ctx->clk_data.num` after
allocation for `struct visconti_pll_provider` and before accessing the
flexible array `ctx->clk_data.hws`. And, as assignments for all members
in `struct visconti_pll_provider` are originally adjacent to each other,
relocate all assignments together, so we don't split up
`ctx->clk_data.hws = nr_plls` from the rest. :)
Reviewed-by: Kees Cook <[email protected]>
Acked-by: Nobuhiro Iwamatsu <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Link: https://lore.kernel.org/r/e3189f3e40e8723b6d794fb2260e2e9ab6b960bd.1697492890.git.gustavoars@kernel.org
Signed-off-by: Stephen Boyd <[email protected]>
|
|
`struct clk_hw_onecell_data` is a flexible structure, which means that
it contains flexible-array member at the bottom, in this case array
`hws`:
include/linux/clk-provider.h:
1380 struct clk_hw_onecell_data {
1381 unsigned int num;
1382 struct clk_hw *hws[] __counted_by(num);
1383 };
This could potentially lead to an overwrite of the objects following
`clk_data` in `struct visconti_pll_provider`, in this case
`struct device_node *node;`, at run-time:
drivers/clk/visconti/pll.h:
16 struct visconti_pll_provider {
17 void __iomem *reg_base;
18 struct clk_hw_onecell_data clk_data;
19 struct device_node *node;
20 };
Notice that a total of 56 bytes are allocated for flexible-array `hws`
at line 328. See below:
include/dt-bindings/clock/toshiba,tmpv770x.h:
14 #define TMPV770X_NR_PLL 7
drivers/clk/visconti/pll-tmpv770x.c:
69 ctx = visconti_init_pll(np, reg_base, TMPV770X_NR_PLL);
drivers/clk/visconti/pll.c:
321 struct visconti_pll_provider * __init visconti_init_pll(struct device_node *np,
322 void __iomem *base,
323 unsigned long nr_plls)
324 {
325 struct visconti_pll_provider *ctx;
...
328 ctx = kzalloc(struct_size(ctx, clk_data.hws, nr_plls), GFP_KERNEL);
`struct_size(ctx, clk_data.hws, nr_plls)` above translates to
sizeof(struct visconti_pll_provider) + sizeof(struct clk_hw *) * 7 ==
24 + 8 * 7 == 24 + 56
^^^^
|
allocated bytes for flex array `hws`
$ pahole -C visconti_pll_provider drivers/clk/visconti/pll.o
struct visconti_pll_provider {
void * reg_base; /* 0 8 */
struct clk_hw_onecell_data clk_data; /* 8 8 */
struct device_node * node; /* 16 8 */
/* size: 24, cachelines: 1, members: 3 */
/* last cacheline: 24 bytes */
};
And then, after the allocation, some data is written into all members
of `struct visconti_pll_provider`:
332 for (i = 0; i < nr_plls; ++i)
333 ctx->clk_data.hws[i] = ERR_PTR(-ENOENT);
334
335 ctx->node = np;
336 ctx->reg_base = base;
337 ctx->clk_data.num = nr_plls;
Fix all these by placing the declaration of object `clk_data` at the
end of `struct visconti_pll_provider`. Also, add a comment to make it
clear that this object must always be last in the structure, and
prevent this bug from being introduced again in the future.
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
Fixes: b4cbe606dc36 ("clk: visconti: Add support common clock driver and reset driver")
Cc: [email protected]
Reviewed-by: Kees Cook <[email protected]>
Acked-by: Nobuhiro Iwamatsu <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Link: https://lore.kernel.org/r/57a831d94ee2b3889b11525d4ad500356f89576f.1697492890.git.gustavoars@kernel.org
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Field regmap of struct visconti_pll_provider is never used. Remove it.
Signed-off-by: Dario Binacchi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Nobuhiro Iwamatsu <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
@pll->rate_table has allocated memory by kmemdup(), if clk_hw_register()
fails, it should be freed, otherwise it will cause memory leak issue,
this patch fixes it.
Fixes: b4cbe606dc36 ("clk: visconti: Add support common clock driver and reset driver")
Signed-off-by: Xiu Jianfeng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Nobuhiro Iwamatsu <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
This code was using -1 to represent that there was no reset function.
Unfortunately, the -1 was stored in u8 so the if (clks[i].rs_id >= 0)
condition was always true. This lead to an out of bounds access in
visconti_clk_register_gates().
Fixes: b4cbe606dc36 ("clk: visconti: Add support common clock driver and reset driver")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20220316083533.GA30941@kili
Acked-by: Nobuhiro Iwamatsu <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
|
|
The "pll_clck" variable is uninitialized. The "ret" error code was
supposed to be printed instead.
Fixes: b4cbe606dc36 ("clk: visconti: Add support common clock driver and reset driver")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20220111072529.GJ11243@kili
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Clang warns:
drivers/clk/visconti/pll.c:292:20: warning: address of array 'ctx->clk_data.hws' will always evaluate to 'true' [-Wpointer-bool-conversion]
if (ctx->clk_data.hws && id)
~~~~~~~~~~~~~~^~~ ~~
1 warning generated.
This array cannot be NULL if ctx is not NULL, which is allocated in
visconti_init_pll(), so just remove the check, which matches other clk
drivers.
Fixes: b4cbe606dc36 ("clk: visconti: Add support common clock driver and reset driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1564
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Add support for common interface of the common clock and reset driver
for Toshiba Visconti5 and its SoC, TMPV7708. The PIPLLCT provides the PLL,
and the PISMU provides clock and reset functionality.
Each drivers are provided in this patch.
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[[email protected]: Add bitfield.h include to pll.c]
Signed-off-by: Stephen Boyd <[email protected]>
|