aboutsummaryrefslogtreecommitdiff
path: root/drivers/clk/renesas
AgeCommit message (Collapse)AuthorFilesLines
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds10-120/+205
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-07-12scripts/spelling.txt: add spelling fix for prohibitedChris Paterson1-1/+1
Misspelling 'prohibited' is quite common in the real world, although surprisingly not so much in the Linux Kernel. In addition to fixing the typo we may as well add it to the spelling checker. Also adding the present participle (prohibiting). Link: http://lkml.kernel.org/r/20190514153341.22540-1-chris.paterson2@renesas.com Fixes: 5bf2fbbef50c ("clk: renesas: cpg-mssr: Add r8a77470 support") Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-20clk: renesas: cpg-mssr: Use [] to denote a flexible array memberGeert Uytterhoeven1-1/+1
Flexible array members should be denoted using [] instead of [0], else gcc will not warn when they are no longer at the end of the structure. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-20clk: renesas: cpg-mssr: Combine driver-private and clock array allocationGeert Uytterhoeven1-14/+6
Make cpg_mssr_priv.clks[] a flexible array member, and use the new struct_size() helper, to combine the allocation of the driver-private structure and array of available clocks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-20clk: renesas: mstp: Combine group-private and clock array allocationGeert Uytterhoeven1-6/+6
Make mstp_clock_group.clks[] a flexible array member, and use the new struct_size() helper, to combine the allocation of the group-private structure and array of module clocks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-20clk: renesas: div6: Combine clock-private and parent array allocationGeert Uytterhoeven1-14/+5
Make div6_clock.parents[] a flexible array member, and use the new struct_size() helper, to combine the allocation of the clock-private structure and array of parent clocks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-20clk: renesas: cpg-mssr: Update kerneldoc for struct cpg_mssr_privGeert Uytterhoeven1-1/+2
New fields were added, but kerneldoc was forgotten, or inserted at the wrong place. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-18clk: renesas: r8a774a1: Add TMU clockFabrizio Castro1-0/+5
This patch adds the TMU clocks to the R8A774A1 SoC. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-18clk: renesas: r8a77995: Add CMM clocksJacopo Mondi1-0/+2
Add clock definitions for CMM units on Renesas R-Car D3. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-18clk: renesas: r8a77990: Add CMM clocksJacopo Mondi1-0/+2
Add clock definitions for CMM units on Renesas R-Car E3. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-18clk: renesas: r8a77965: Add CMM clocksJacopo Mondi1-0/+3
Add clock definitions for CMM units on Renesas R-Car M3-N. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-18clk: renesas: r8a7795: Add CMM clocksJacopo Mondi1-0/+4
Add clock definitions for CMM units on Renesas R-Car H3. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-04clk: renesas: r9a06g032: Add clock domain supportGareth Williams1-69/+158
There are several clocks on the r9a06g032 which are currently not enabled in their drivers that can be delegated to clock domain system for power management. Therefore add support for clock domain functionality to the r9a06g032 clock driver. Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-04clk: renesas: mstp: Remove error messages on out-of-memory conditionsGeert Uytterhoeven1-6/+2
pm_clk_create() and pm_clk_add_clk() can fail only when running out of memory. Hence there is no need to print error messages on failure, as the memory allocation core already takes care of that. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-06-04clk: renesas: cpg-mssr: Remove error messages on out-of-memory conditionsGeert Uytterhoeven1-6/+2
pm_clk_create() and pm_clk_add_clk() can fail only when running out of memory. Hence there is no need to print error messages on failure, as the memory allocation core already takes care of that. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-06-04clk: renesas: cpg-mssr: Use genpd of_node instead of local copyGeert Uytterhoeven1-3/+1
Since commit 6a0ae73d95956f7e ("PM / Domain: Add support to parse domain's OPP table"), of_genpd_add_provider_simple() fills in the dev.of_node field in the generic_pm_domain structure. Hence cpg_mssr_is_pm_clk() can use that instead of its own copy in the driver-private cpg_mssr_clk_domain structure. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-05-21clk: renesas: r8a7796: Add CMM clocksJacopo Mondi1-0/+3
Add clock definitions for CMM units on Renesas R-Car Gen3 M3-W. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-05-21clk: renesas: r8a779{5|6|65}: Add TPU clockCao Van Dong3-0/+3
This patch adds the TPU clock on the R-Car r8a7795/r8a7796/r8a77965 SoCs. Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd8-0/+8
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-07Merge branches 'clk-stm32f4', 'clk-tegra', 'clk-at91', 'clk-sifive-fu540' ↵Stephen Boyd3-6/+6
and 'clk-spdx' into clk-next - Support for STM32F769 - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support * clk-stm32f4: clk: stm32mp1: Add ddrperfm clock clk: stm32: Introduce clocks of STM32F769 board * clk-tegra: clk: tegra: divider: Mark Memory Controller clock as read-only clk: tegra: emc: Replace BUG() with WARN_ONCE() clk: tegra: emc: Fix EMC max-rate clamping clk: tegra: emc: Support multiple RAM codes clk: tegra: emc: Don't enable EMC clock manually clk: tegra124: Remove lock-enable bit from PLLM clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider clk: tegra: Don't enable already enabled PLLs * clk-at91: clk: at91: Mark struct clk_range as const clk: at91: add sam9x60 pmc driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 PLL driver clk: at91: master: Add sam9x60 support clk: at91: usb: Add sam9x60 support clk: at91: allow configuring generated PCR layout clk: at91: allow configuring peripheral PCR layout clk: at91: sckc: handle different RC startup time clk: at91: modernize sckc binding dt-bindings: clock: at91: new sckc bindings * clk-sifive-fu540: clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library dt-bindings: clk: add documentation for the SiFive PRCI driver * clk-spdx: clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier
2019-05-01clk: renesas: Use the correct style for SPDX License IdentifierNishad Kamdar3-6/+6
This patch corrects the SPDX License Identifier style in header files related to Clock Drivers for Renesas Socs. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11clk: renesas: rcar-gen3: Remove unused variableStephen Boyd1-1/+0
This variable is no longer used and the compiler rightly complains that it should be removed. Drop it to silence the following: drivers/clk/renesas/rcar-gen3-cpg.c: In function 'cpg_sd_clk_register': drivers/clk/renesas/rcar-gen3-cpg.c:386:15: warning: unused variable 'i' [-Wunused-variable] unsigned int i; Cc: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: b953eaaeb58e ("clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-04clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return valueTakeshi Kihara1-16/+14
cpg_sd_clock_round_rate() may return an unsupported clock rate for the requested clock rate. Therefore, when cpg_sd_clock_set_rate() sets the clock rate acquired by cpg_sd_clock_round_rate(), an error may occur. This is not conform the clk API design. This patch fixes that by making sure cpg_sd_clock_calc_div() considers only the division values defined in cpg_sd_div_table[]. With this fix, the cpg_sd_clock_round_rate() always return a support clock rate. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Fixes: 90c073e53909da85 ("clk: shmobile: r8a7795: Add SD divider support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: r8a77980: Fix RPC-IF module clock's parentSergei Shtylyov1-1/+1
Testing has shown that the RPC-IF module clock's parent is the RPCD2 clock, not the RPC one -- the RPC-IF register reads stall otherwise... Fixes: 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Rename DRIF clocksTakeshi Kihara4-34/+35
According to the R-Car Gen3 Hardware Manual Errata for Rev. 1.50 of Feb 12, 2019, the DRIF clocks have been renamed as follows: DRIF0 to DRIF00 DRIF1 to DRIF01 DRIF2 to DRIF10 DRIF3 to DRIF11 DRIF4 to DRIF20 DRIF5 to DRIF21 DRIF6 to DRIF30 DRIF7 to DRIF31 Therefore, this patch renames the DRIF clocks from DRIFn to DRIFmm. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of Audio-DMACTakeshi Kihara7-11/+11
The clock sources of the AXI-bus clock (266.66 MHz) used for Audio-DMAC DMA transfers are: Channel R-Car H3 R-Car M3-W R-Car M3-N R-Car E3 --------------------------------------------------------------- Audio-DMAC0 S1D2 S1D2 S1D2 S1D2 Audio-DMAC1 S1D2 S1D2 S1D2 - As a result, change the parent clocks of the Audio-DMAC{0,1} module clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S1D2, and change the parent clock of the Audio-DMAC0 module on R-Car E3 to S1D2. NOTE: This information will be reflected in a future revision of the R-Car Gen3 Hardware Manual. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update R-Car D3, RZ/G2M, and RZ/G2E] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of SYS-DMACTakeshi Kihara4-8/+8
The clock sources of the AXI BUS clock (266.66 MHz) used for SYS-DMAC DMA transfers are: Channel R-Car H3 R-Car M3-W R-Car M3-N ------------------------------------------------- SYS-DMAC0 S0D3 S0D3 S0D3 SYS-DMAC1 S3D1 S3D1 S3D1 SYS-DMAC2 S3D1 S3D1 S3D1 As a result, change the parent clocks of the SYS-DMAC{1,2} module clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S3D1. NOTE: This information will be reflected in a future revision of the R-Car Gen3 Hardware Manual. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update RZ/G2M] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of HS-USBKazuya Mizuguchi6-7/+7
According to the R-Car Gen3 Hardware Manual Rev. 1.00, and the RZ/G2 Hardware Manual Rev. 0.61, the parent clock of the HS-USB module clocks on R-Car Gen3 and RZ/G2 SoCs is S3D2. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [takeshi: Update R-Car H3, M3-N, and E3] Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update RZ/G2M and RZ/G2E] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCIKazuya Mizuguchi6-12/+12
According to the R-Car Gen3 Hardware Manual Rev. 1.00, and the RZ/G2 Hardware Manual Rev. 0.61, the parent clock of the EHCI/OHCI module clocks on R-Car Gen3 and RZ/G2 SoCs is S3D2. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [takeshi: Update R-Car H3, M3-N, and E3] Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update RZ/G2M and RZ/G2E] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: r8a774c0: Add Z2 clockSimon Horman1-0/+1
Adds support for RZ/G2E (r8a774c0) Z2 clock. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: r8a77990: Add Z2 clockTakeshi Kihara1-0/+1
Adds support for R-Car E3 (r8a77990) Z2 clock. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [simon: reworked changelog; rebased] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parentsSimon Horman1-2/+2
Support Z and Z2 clocks with parent frequencies greater than UINT32_MAX Hz (~4.29GHz). The DIV_ROUND_CLOSEST_ULL() macro accepts a 64bit dividend and 32bit divisor. This leads to truncation of the divisor, which is the Z or Z2 parent clock frequency in HZ, on platforms where frequency of that clock is greater than UINT32_MAX Hz. To resolve this problem the DIV64_U64_ROUND_CLOSEST() macro, which takes on an unsigned 64bit dividend and divisor, is used. An earlier version of this patch made use of the existing DIV_ROUND_CLOSEST() macro, which accepts the prevailing type of the dividend and divisor. However, this does not compile on 32bit systems, such as i386 and mips, when called with the types used at this call site, an unsigned long long dividend and unsigned long divisor. This work is in preparation for supporting the Z2 clock on the R-Car Gen3 E3 (r8a77990) SoC which has a 4.8GHz parent clock. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2Simon Horman5-5/+3
After recent reworking of Z and Z2 clk handling CLK_TYPE_GEN3_Z and CLK_TYPE_GEN3_Z2 have come to have precisely the same meaning. Remove this redundancy by eliminating the latter. This is not expected to have any run-time effect. As suggested by Geert Uytterhoeven. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offsetSimon Horman6-20/+13
Parameterise the offset of control bits within the FRQCRC register for Z and Z2 clocks. This is in preparation for supporting the Z2 clock on the R-Car E3 (r8a77990) SoC which uses a different offset for control bits to other, already, supported SoCs. As suggested by Geert Uytterhoeven. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisorTakeshi Kihara6-16/+28
Parameterise Z and Z2 clock fixed divisor to allow clocks with a fixed divisor other than 2, the value used by all such clocks supported to date. This is in preparation for supporting the Z2 clock on the R-Car E3 (r8a77990) SoC which has a fixed divisor of 4. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [simon: squashed several patches; rewrote changelog; added r8a774a1 change] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: r9a06g032: Add missing PCI USB clockGareth Williams1-0/+1
The clock driver is missing support for the clk_pci_usb clock that is present on the SoC. This is added to allow the clock to be supported. Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: r7s9210: Always use readl()Geert Uytterhoeven1-1/+2
On arm32, there is no reason to use the (soon deprecated) clk_readl(). Hence use the generic readl() instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-03-18clk: renesas: rcar-gen3: Pass name/offset to cpg_sd_clk_register()Geert Uytterhoeven1-6/+6
Explicitly pass the clock's name and register offset to cpg_sd_clk_register(), so the latter doesn't have to extract them from the cpg_core_clk object. This keeps all cpg_core_clk parsing and unmarshalling contained in a single function (rcar_gen3_cpg_clk_register()). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-25clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLKFabrizio Castro1-1/+1
Enum LAST_DT_CORE_CLK needs updating as R8A774A1_CLK_CANFD was recently added and it's the core clock with the highest index. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Fixes: 9d034e151b40 ("clk: renesas: r8a774a1: Add missing CANFD clock") Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLKFabrizio Castro1-1/+1
Enum LAST_DT_CORE_CLK needs updating as R8A774C0_CLK_CANFD was recently added and it's the core clock with the highest index. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Fixes: 2a6efbc6da5d248c ("clk: renesas: r8a774c0: Add missing CANFD clock") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-05clk: renesas: r8a774c0: Add TMU clockBiju Das1-0/+5
This patch adds the TMU clocks to the R8A774C0 SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-05clk: renesas: r8a77980: Add RPC clocksSergei Shtylyov1-0/+8
Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it, as well as the RPC-IF module clock, in the R-Car V3H (R8A77980) CPG/MSSR driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-05clk: renesas: rcar-gen3: Add RPC clocksSergei Shtylyov2-0/+105
The RPCSRC internal clock is controlled by the RPCCKCR.DIV[4:3] on all the R-Car gen3 SoCs except V3M (R8A77970) but the encoding of this field is different between SoCs; it makes sense to support the most common case of this encoding in the R-Car gen3 CPG driver... After adding the RPCSRC clock, we can add the RPC[D2] clocks derived from it and controlled by the RPCCKCR register on all the R-Car gen3 SoCs except V3M (R8A77970); the composite clock driver seems handy for this task, using the spinlock added in the previous patch... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-25clk: renesas: rcar-gen3: Add spinlockSergei Shtylyov1-0/+8
Protect the CPG register read-modify-write sequence with a spinlock. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-25clk: renesas: rcar-gen3: Factor out cpg_reg_modify()Sergei Shtylyov1-18/+20
There's quite often repeated sequence of a CPG register read-modify-write, so it seems worth factoring it out into a function -- this saves 68 bytes of the object code (AArch64 gcc 4.8.5) and simplifies protecting all such sequences with a spinlock in the next patch... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-24clk: renesas: r8a774c0: Correct parent clock of DUGeert Uytterhoeven1-2/+2
According to the RZ/G Series, 2nd Generation Hardware Manual Rev 0.61, the parent clock of the DU module clocks on RZ/G2E is S1D1. Fixes: 906e0a4a6d1ef2d3 ("clk: renesas: cpg-mssr: Add r8a774c0 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-21clk: renesas: r8a774a1: Add missing CANFD clockFabrizio Castro1-0/+2
This patch adds the missing CANFD clock to the r8a774a1 specific clock driver. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-21clk: renesas: r8a774c0: Add missing CANFD clockFabrizio Castro1-0/+4
This patch adds the missing CANFD clock to the r8a774c0 specific clock driver. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-12-14Merge branch 'clk-of' into clk-nextStephen Boyd1-1/+1
* clk-of: clk: Use of_node_name_eq for node name comparisons
2018-12-14clk: Use of_node_name_eq for node name comparisonsRob Herring1-1/+1
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which all of these are. Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-renesas-soc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> (clk-mstp) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (ux500) Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.