aboutsummaryrefslogtreecommitdiff
path: root/drivers/clk/at91/sam9x60.c
AgeCommit message (Collapse)AuthorFilesLines
2024-08-07clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputsVarshini Rajendran1-0/+7
SAM9X7 SoC family supports different core output frequencies for different PLL IDs. To handle the same in the PLL driver, a separate parameter core_output is added. The sam9x60 and sama7g5 SoC PMC drivers are aligned to the PLL driver by adding the core output freq range in the PLL characteristics configurations. Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/20240729070737.1990756-1-varshini.rajendran@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2023-06-21clk: at91: clk-sam9x60-pll: add support for parent_hwClaudiu Beznea1-2/+2
Add support for parent_hw in SAM9X60 PLL clock drivers. With this parent-child relation is described with pointers rather than strings making registration a bit faster. All the SoC based drivers that rely on clk-sam9x60-pll were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-9-claudiu.beznea@microchip.com
2023-06-21clk: at91: clk-system: add support for parent_hwClaudiu Beznea1-1/+1
Add support for parent_hw in system clock drivers. With this parent-child relation is described with pointers rather than strings making registration a bit faster. All the SoC based drivers that rely on clk-system were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-7-claudiu.beznea@microchip.com
2023-06-21clk: at91: clk-programmable: add support for parent_hwClaudiu Beznea1-1/+1
Add support for parent_hw in programmable clock driver. With this parent-child relation is described with pointers rather than strings making registration a bit faster. All the SoC based drivers that rely on clk-programmable were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-6-claudiu.beznea@microchip.com
2023-06-21clk: at91: clk-peripheral: add support for parent_hwClaudiu Beznea1-1/+1
Add support for parent_hw in peripheral clock drivers. With this parent-child relation is described with pointers rather than strings making registration a bit faster. All the SoC based drivers that rely on clk-peripheral were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-5-claudiu.beznea@microchip.com
2023-06-21clk: at91: clk-master: add support for parent_hwClaudiu Beznea1-2/+2
Add support for parent_hw in master clock drivers. With this parent-child relation is described with pointers rather than strings making registration a bit faster. All the SoC based drivers that rely on clk-master were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-4-claudiu.beznea@microchip.com
2023-06-21clk: at91: clk-generated: add support for parent_hwClaudiu Beznea1-1/+1
Add support for parent_hw in generic clock drivers. With this parent-child relation is described with pointers rather than strings making registration a bit faster. All the SoC based drivers that rely on clk-generated were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-3-claudiu.beznea@microchip.com
2023-06-21clk: at91: clk-main: add support for parent_data/parent_hwClaudiu Beznea1-2/+2
Add support for parent_data and parent_hw in main oscillator clock drivers. With this parent-child relations are described with pointers rather than strings making registration a bit faster. All the SoC based drivers that rely on clk-main were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-2-claudiu.beznea@microchip.com
2023-01-09clk: at91: mark ddr clocks as criticalClaudiu Beznea1-4/+16
Mark DDR clocks as critical for AT91 devices. These clocks are enabled by bootloader when initializing DDR and needs to stay enabled. Up to this patch the DDR clocks were requested from drivers/memory/atmel-sdramc.c which does only clock request and enable. There is no need to have a separate driver just for this, thus the atmel-sdramc.c will be deleted in a subsequent patch. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221208114515.35179-2-claudiu.beznea@microchip.com
2022-03-08clk: at91: clk-master: remove dead codeClaudiu Beznea1-2/+1
Commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master clock") removed the master clock's prescaler from clock tree of SAMA7G5 as it has been discovered that there is a hardware bug when trying to change it at run-time (bug is described in description of commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master clock")). This was previously changed at CPUFreq driver request. Thus, with commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master clock") there is no need of code that handles run-time changes of master clock's prescaler, thus remove this code. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220203110202.18329-1-claudiu.beznea@microchip.com
2021-10-26clk: at91: clk-sam9x60-pll: add notifier for div part of PLLClaudiu Beznea1-3/+3
SAM9X60's PLL which is also part of SAMA7G5 is composed of 2 parts: one fractional part and one divider. On SAMA7G5 the CPU PLL could be changed at run-time to implement DVFS. The hardware clock tree on SAMA7G5 for CPU PLL is as follows: +---- div1 ----------------> cpuck | FRAC PLL ---> DIV PLL -+-> prescaler ---> div0 ---> mck0 The div1 block is not implemented in Linux; on prescaler block it has been discovered a bug on some scenarios and will be removed from Linux in next commits. Thus, the final clock tree that will be used in Linux will be as follows: +-----------> cpuck | FRAC PLL ---> DIV PLL -+-> div0 ---> mck0 It has been proposed in [1] to not introduce a new CPUFreq driver but to overload the proper clock drivers with proper operation such that cpufreq-dt to be used. To accomplish this DIV PLL and div0 implement clock notifiers which applies safe dividers before FRAC PLL is changed. The current commit treats only the DIV PLL by adding a notifier that sets a safe divider on PRE_RATE_CHANGE events. The safe divider is provided by initialization clock code (sama7g5.c). The div0 is treated in next commits (to keep the changes as clean as possible). [1] https://lore.kernel.org/lkml/20210105104426.4tmgc2l3vyicwedd@vireshk-i7/ Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-12-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sam9x60: remove atmel,osc-bypass supportAlexandre Belloni1-5/+1
The sam9x60 doesn't have the MOSCXTBY bit to enable the crystal oscillator bypass. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Reported-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201202125816.168618-1-alexandre.belloni@bootlin.com Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-master: re-factor master clockClaudiu Beznea1-7/+16
Re-factor master clock driver by splitting it into 2 clocks: prescaller and divider clocks. Based on registered clock flags the prescaler's rate could be changed at runtime. This is necessary for platforms supporting DVFS (e.g. SAMA7G5) where master clock could be changed at run-time. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-11-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-sam9x60-pll: allow runtime changes for pllClaudiu Beznea1-4/+18
Allow runtime frequency changes for PLLs registered with proper flags. This is necessary for CPU PLL on SAMA7G5 which is used by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-7-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-14clk: at91: sam9x60: support only two programmable clocksClaudiu Beznea1-1/+1
According to datasheet (Chapter 29.16.13, PMC Programmable Clock Register) there are only two programmable clocks on SAM9X60. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1602686072-28296-1-git-send-email-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputsClaudiu Beznea1-9/+41
Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-programmable: add mux_table optionClaudiu Beznea1-1/+2
Add mux table option. This is necessary for IP versions that has gaps in the range of available clock sources (e.g. SAMA7G5). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-15-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-peripheral: add support for changeable parent rateClaudiu Beznea1-1/+1
Some peripheral clocks on SAMA7G5 supports requesting parent to change its rate (image related clocks: csi, csi2dc, isc). Add support so that if registered with this option the clock rate to be requested from parent. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-14-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-generated: add mux_table optionClaudiu Beznea1-1/+1
Add mux table option. This is necessary for IP versions that has gaps in the range of available clock sources (e.g. SAMA7G5). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-12-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-generated: pass the id of changeable parent at registrationClaudiu Beznea1-2/+1
Pass the ID of changeable parent at registration. This will allow the scalability of this clock driver with regards to the changeable parent ID for versions of this IP where changeable parent is not the last one in the parents list (e.g. SAMA7G5). With this the clock flags are set to zero in case we have no changeable parent. Also in clk_generated_best_diff() the *best_diff variable is check against tmp_diff variable using ">=" operator instead of ">" so that in case the requested frequency could be obtained using fix parents + gck dividers but the clock also supports changeable parent to be able to force the usage of the changeable parent. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-11-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: sam9x60: fix main rc oscillator frequencyClaudiu Beznea1-1/+1
Main RC oscillator frequency is 12MHz according to datasheet (chapter 27.2). Fixes: 01e2113de9a52 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1595403506-8209-8-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: sam9x60-pll: check fcore against rangesClaudiu Beznea1-1/+1
According to datasheet the range of 600-1200MHz is for the frequency generated by the fractional part of the PLL (namely Fcorepllck according to datasheet). With this in mind the output range of the PLL itself (fractional + div), taking into account that the divider is 8 bits wide, is 600/256-1200Hz=2.3-1200MHz. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-6-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: fix possible dead lock in new driversAhmad Fatoum1-1/+1
syscon_node_to_regmap() will make the created regmap get and enable the first clock it can parse from the device tree. This clock is not needed to access the registers and should not be enabled at that time. Use device_node_to_regmap to resolve this as it looks up the regmap in the same list but doesn't care about the clocks. This issue is detected by lockdep when booting the sama5d3 with a device tree containing the new clk bindings. This fix already happened in 6956eb33abb5 ("clk: at91: fix possible deadlock") for the drivers that had been migrated to the new clk binding back then. This does the same for the new drivers as well. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/20200703073236.23923-1-a.fatoum@pengutronix.de Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: at91: allow setting all PMC clock parents via DTMichał Mirosław1-1/+3
We need to have clocks accessible via phandle to select them as peripheral clock parent using assigned-clock-parents in DT. Add support for PLLACK/PLLBCK/AUDIOPLLCK clocks where available. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lkml.kernel.org/r/fa39cc10dab8341ea4bc2b7152be9217b2cd34a5.1588630999.git.mirq-linux@rere.qmqm.pl Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: at91: allow setting PCKx parent via DTMichał Mirosław1-1/+3
This exposes PROGx clocks for use in assigned-clocks DeviceTree property for selecting PCKx parent clock. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lkml.kernel.org/r/0054532c00163ddf405dad658b32f0d7d97fcc8e.1588630999.git.mirq-linux@rere.qmqm.pl Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: at91: optimize pmc data allocationMichał Mirosław1-1/+1
Alloc whole data structure in one block. This makes the code shorter, more efficient and easier to extend in following patch. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lkml.kernel.org/r/fc6f6d67b8cee0beace4a9d9cca7431e5efa769d.1588630999.git.mirq-linux@rere.qmqm.pl Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-12clk: at91: sam9x60: fix usb clock parentsClaudiu Beznea1-3/+2
SAM9X60's USB clock has 3 parents: plla, upll and main_osc. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lkml.kernel.org/r/1579261009-4573-3-git-send-email-claudiu.beznea@microchip.com Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-12clk: at91: sam9x60: Don't use audio PLLCodrin Ciubotariu1-6/+3
On sam9x60, there is not audio PLL and so I2S and classD have to use one of the best matching parents for their generated clock. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lkml.kernel.org/r/20200131115816.12483-1-codrin.ciubotariu@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-05clk: at91: sam9x60: fix programmable clock prescalerEugen Hristev1-0/+1
The prescaler works as parent rate divided by (PRES + 1) (is_pres_direct == 1) It does not work in the way of parent rate shifted to the right by (PRES + 1), which means division by 2^(PRES + 1) (is_pres_direct == 0) Thus is_pres_direct must be enabled for this SoC, to make the right computation. This field was added in commit 45b06682113b ("clk: at91: fix programmable clock for sama5d2") SAM9X60 has the same field as SAMA5D2 in the PCK Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1575977088-16781-1-git-send-email-eugen.hristev@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-03clk: at91: sam9x60: fix programmable clockEugen Hristev1-0/+1
The prescaler mask for sam9x60 must be 0xff (8 bits). Being set to 0, means that we cannot set any prescaler, thus the programmable clocks do not work (except the case with prescaler 0) Set the mask accordingly in layout struct. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1569321191-27606-1-git-send-email-eugen.hristev@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: Mark struct clk_range as constStephen Boyd1-2/+2
It's just some static data that doesn't get changed after being used. Mark it const everywhere. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: add sam9x60 pmc driverAlexandre Belloni1-0/+307
Add a driver for the PMC clocks of the sam9c60. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Staticize spinlock] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.