aboutsummaryrefslogtreecommitdiff
path: root/drivers/clk/at91/sam9x60.c
AgeCommit message (Collapse)AuthorFilesLines
2020-07-24clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputsClaudiu Beznea1-9/+41
Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-programmable: add mux_table optionClaudiu Beznea1-1/+2
Add mux table option. This is necessary for IP versions that has gaps in the range of available clock sources (e.g. SAMA7G5). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-15-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-peripheral: add support for changeable parent rateClaudiu Beznea1-1/+1
Some peripheral clocks on SAMA7G5 supports requesting parent to change its rate (image related clocks: csi, csi2dc, isc). Add support so that if registered with this option the clock rate to be requested from parent. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-14-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-generated: add mux_table optionClaudiu Beznea1-1/+1
Add mux table option. This is necessary for IP versions that has gaps in the range of available clock sources (e.g. SAMA7G5). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-12-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: clk-generated: pass the id of changeable parent at registrationClaudiu Beznea1-2/+1
Pass the ID of changeable parent at registration. This will allow the scalability of this clock driver with regards to the changeable parent ID for versions of this IP where changeable parent is not the last one in the parents list (e.g. SAMA7G5). With this the clock flags are set to zero in case we have no changeable parent. Also in clk_generated_best_diff() the *best_diff variable is check against tmp_diff variable using ">=" operator instead of ">" so that in case the requested frequency could be obtained using fix parents + gck dividers but the clock also supports changeable parent to be able to force the usage of the changeable parent. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-11-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: sam9x60: fix main rc oscillator frequencyClaudiu Beznea1-1/+1
Main RC oscillator frequency is 12MHz according to datasheet (chapter 27.2). Fixes: 01e2113de9a52 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1595403506-8209-8-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: sam9x60-pll: check fcore against rangesClaudiu Beznea1-1/+1
According to datasheet the range of 600-1200MHz is for the frequency generated by the fractional part of the PLL (namely Fcorepllck according to datasheet). With this in mind the output range of the PLL itself (fractional + div), taking into account that the divider is 8 bits wide, is 600/256-1200Hz=2.3-1200MHz. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-6-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: fix possible dead lock in new driversAhmad Fatoum1-1/+1
syscon_node_to_regmap() will make the created regmap get and enable the first clock it can parse from the device tree. This clock is not needed to access the registers and should not be enabled at that time. Use device_node_to_regmap to resolve this as it looks up the regmap in the same list but doesn't care about the clocks. This issue is detected by lockdep when booting the sama5d3 with a device tree containing the new clk bindings. This fix already happened in 6956eb33abb5 ("clk: at91: fix possible deadlock") for the drivers that had been migrated to the new clk binding back then. This does the same for the new drivers as well. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/20200703073236.23923-1-a.fatoum@pengutronix.de Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: at91: allow setting all PMC clock parents via DTMichał Mirosław1-1/+3
We need to have clocks accessible via phandle to select them as peripheral clock parent using assigned-clock-parents in DT. Add support for PLLACK/PLLBCK/AUDIOPLLCK clocks where available. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lkml.kernel.org/r/fa39cc10dab8341ea4bc2b7152be9217b2cd34a5.1588630999.git.mirq-linux@rere.qmqm.pl Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: at91: allow setting PCKx parent via DTMichał Mirosław1-1/+3
This exposes PROGx clocks for use in assigned-clocks DeviceTree property for selecting PCKx parent clock. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lkml.kernel.org/r/0054532c00163ddf405dad658b32f0d7d97fcc8e.1588630999.git.mirq-linux@rere.qmqm.pl Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-26clk: at91: optimize pmc data allocationMichał Mirosław1-1/+1
Alloc whole data structure in one block. This makes the code shorter, more efficient and easier to extend in following patch. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lkml.kernel.org/r/fc6f6d67b8cee0beace4a9d9cca7431e5efa769d.1588630999.git.mirq-linux@rere.qmqm.pl Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-12clk: at91: sam9x60: fix usb clock parentsClaudiu Beznea1-3/+2
SAM9X60's USB clock has 3 parents: plla, upll and main_osc. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lkml.kernel.org/r/1579261009-4573-3-git-send-email-claudiu.beznea@microchip.com Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-12clk: at91: sam9x60: Don't use audio PLLCodrin Ciubotariu1-6/+3
On sam9x60, there is not audio PLL and so I2S and classD have to use one of the best matching parents for their generated clock. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lkml.kernel.org/r/20200131115816.12483-1-codrin.ciubotariu@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-05clk: at91: sam9x60: fix programmable clock prescalerEugen Hristev1-0/+1
The prescaler works as parent rate divided by (PRES + 1) (is_pres_direct == 1) It does not work in the way of parent rate shifted to the right by (PRES + 1), which means division by 2^(PRES + 1) (is_pres_direct == 0) Thus is_pres_direct must be enabled for this SoC, to make the right computation. This field was added in commit 45b06682113b ("clk: at91: fix programmable clock for sama5d2") SAM9X60 has the same field as SAMA5D2 in the PCK Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1575977088-16781-1-git-send-email-eugen.hristev@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-03clk: at91: sam9x60: fix programmable clockEugen Hristev1-0/+1
The prescaler mask for sam9x60 must be 0xff (8 bits). Being set to 0, means that we cannot set any prescaler, thus the programmable clocks do not work (except the case with prescaler 0) Set the mask accordingly in layout struct. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1569321191-27606-1-git-send-email-eugen.hristev@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: Mark struct clk_range as constStephen Boyd1-2/+2
It's just some static data that doesn't get changed after being used. Mark it const everywhere. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: add sam9x60 pmc driverAlexandre Belloni1-0/+307
Add a driver for the PMC clocks of the sam9c60. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Staticize spinlock] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.