| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This check is superfluous now that the minimum version of binutils to
build the kernel is 2.25. This also fixes an error seen with
llvm-objdump because it does not support '-v' prior to LLVM 13:
llvm-objdump: error: unknown argument '-v'
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Tested-by: Kees Cook <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Link: https://github.com/llvm/llvm-project/commit/dde24a87c55f82d8c7b3bf3eafb10f2b9b2b9a01
Link: https://lore.kernel.org/r/[email protected]
Closes: https://github.com/ClangBuiltLinux/linux/issues/1362
|
|
Commit a6de553da01c ("kbuild: Allow to combine multiple W= levels")
supported W=123 to enable all the extra warning groups.
I think a similar idea is applicable to the V= option.
V=1 echos the whole command
V=2 prints the reason for rebuilding
These are orthogonal, and can be enabled at the same time.
This commit supports V=12 to enable both of them.
Signed-off-by: Masahiro Yamada <[email protected]>
Tested-by: Nicolas Schier <[email protected]>
Reviewed-by: Nicolas Schier <[email protected]>
|
|
Currently the x86 instruction decoder is used from:
- the kernel itself,
- from tools like objtool and perf,
- within x86 tools, i.e. instruction decoder selftests.
The first two cases are similar, because tools headers try to mimic
kernel headers.
Instruction decoder selftests include some of the kernel headers
directly, including uapi headers. This works until headers dependencies
are kept to a minimum and tools are not cross-compiled. Since the goal
of the x86 instruction decoder selftests is not to verify uapi headers,
move it to using tools headers, like is already done for vdso2c tool,
mkpiggy and other tools in arch/x86/boot/.
Signed-off-by: Vasily Gorbik <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
|
|
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
Rename distill.awk to objdump_reformat.awk because it more
clearly expresses its purpose of re-formatting the output
of objdump so that insn_decoder_test can read it.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/151153625409.22827.10470603625519700259.stgit@devbox
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Rename test_get_len test command to insn_decoder_test
as it a more meaningful name. This also changes some
comments in related files.
Note that this also removes the paragraph about
writing to the Free Software Foundation's mailing
address.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/151153622537.22827.14928774603980883278.stgit@devbox
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When we build an already built kernel again, arch/x86/syscalls/Makefile
and arch/x86/tools/Makefile emits "Nothing to be done for ..."
messages.
Here is the command log:
$ make defconfig
[ snip ]
$ make
[ snip ]
$ make
make[1]: Nothing to be done for `all'. <-----
make[1]: Nothing to be done for `relocs'. <-----
CHK include/config/kernel.release
CHK include/generated/uapi/linux/version.h
Besides not emitting those, "all" and "relocs" should be added to PHONY as well.
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Peter Foley <[email protected]>
Acked-by: Michal Marek <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Refactor the relocs tool so that the same tool can handle 32- and
64-bit ELF.
Signed-off-by: H. Peter Anvin <[email protected]>
Cc: Kees Cook <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
|
|
Since the ELF structures and access macros change size based on 32 vs
64 bits, build a separate 32-bit relocs tool (for handling realmode
and 32-bit relocations), and a 64-bit relocs tool (for handling 64-bit
kernel relocations).
Signed-off-by: Kees Cook <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: H. Peter Anvin <[email protected]>
|
|
Fix the x86 test_get_len tool to have the right include paths in the right
order (it includes a non-exported kernel header directly), otherwise errors
like the following occur:
/data/fs/linux-2.6-hdr/include/linux/types.h:18:26: error: conflicting types for 'fd_set'
/usr/include/sys/select.h:78:5: note: previous declaration of 'fd_set' was here
and
/data/fs/linux-2.6-hdr/include/linux/string.h:42:12: error: expected identifier or '(' before '__extension__'
Signed-off-by: David Howells <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Acked-by: Paul E. McKenney <[email protected]>
Acked-by: Dave Jones <[email protected]>
|
|
A new option is added to the relocs tool called '--realmode'.
This option causes the generation of 16-bit segment relocations
and 32-bit linear relocations for the real-mode code. When
the real-mode code is moved to the low-memory during kernel
initialization, these relocation entries can be used to
relocate the code properly.
In the assembly code 16-bit segment relocations must be relative
to the 'real_mode_seg' absolute symbol. Linear relocations must be
relative to a symbol prefixed with 'pa_'.
16-bit segment relocation is used to load cs:ip in 16-bit code.
Linear relocations are used in the 32-bit code for relocatable
data references. They are declared in the linker script of the
real-mode code.
The relocs tool is moved to arch/x86/tools/relocs.c, and added new
target archscripts that can be used to build scripts needed building
an architecture. be compiled before building the arch/x86 tree.
[ hpa: accelerating this because it detects invalid absolute
relocations, a serious bug in binutils 2.22.52.0.x which currently
produces bad kernels. ]
Signed-off-by: H. Peter Anvin <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Cc: <[email protected]>
|
|
Fix arch/x86/tools/Makefile to compile both test tools
correctly. This bug leads build error.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/20111205120533.15475.62047.stgit@cloud
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Add a sanity test of x86 insn decoder against a stream
of randomly generated input, at build time.
This test is also able to reproduce any bug that might
trigger by allowing the passing of random-seed and
iteration-number to the test, or by passing input
which has invalid byte code.
Changes in V2:
- Code cleanup.
- Show how to reproduce the error by insn_sanity test.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Andi Kleen <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Check objdump version before using it for insn decoder build test,
because some older objdump can't decode AVX code correctly.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Jim Keniston <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
|
|
Fix postest_verbose to posttest_verbose, and add posttest_64bit option
for CONFIG_64BIT != y, since old command just passed '-' instead
of '-n' when CONFIG_64BIT is not set.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Jim Keniston <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
|
|
Add verbose option to insn decoder test. This dumps decoded
instruction when building kernel with V=1.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: systemtap <[email protected]>
Cc: DLE <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Stephen Rothwell <[email protected]>
LKML-Reference: <20091116230618.5250.18762.stgit@harusame>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Add the kernel source include file as well to the include files
search path, to fix this build bug:
In file included from arch/x86/tools/test_get_len.c:28:
arch/x86/lib/insn.c:21:26: error: linux/string.h: No such file or directory
Cc: Masami Hiramatsu <[email protected]>
Cc: systemtap<[email protected]>
Cc: DLE <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Pass $(CONFIG_64BIT) to the x86 insn decoder selftest in case we are
decoding 32bit code on x86-64, which will happen when building kernel
with ARCH=i386 on x86-64.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: Ingo Molnar <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
Fix x86 instruction decoder selftest to check only .text because other
sections (e.g. .notes) will have random bytes which don't need to be
checked.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Jim Keniston <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Avi Kivity <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Li Zefan <[email protected]>
Cc: Przemysław Pawełczyk <[email protected]>
Cc: Roland McGrath <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Tom Zanussi <[email protected]>
Cc: Vegard Nossum <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|
|
Add a user-space selftest of x86 instruction decoder at kernel build
time.
When CONFIG_X86_DECODER_SELFTEST=y, Kbuild builds a test harness of x86
instruction decoder and performs it after building vmlinux.
The test compares the results of objdump and x86 instruction decoder
code and check there are no differences.
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Jim Keniston <[email protected]>
Cc: Ananth N Mavinakayanahalli <[email protected]>
Cc: Avi Kivity <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Frank Ch. Eigler <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: K.Prasad <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Li Zefan <[email protected]>
Cc: Przemysław Pawełczyk <[email protected]>
Cc: Roland McGrath <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Srikar Dronamraju <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Tom Zanussi <[email protected]>
Cc: Vegard Nossum <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
|