| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The unicore32 port do not seem maintained for a long time now, there is no
upstream toolchain that can create unicore32 binaries and all the links to
prebuilt toolchains for unicore32 are dead. Even compilers that were
available are not supported by the kernel anymore.
Guenter Roeck says:
I have stopped building unicore32 images since v4.19 since there is no
available compiler that is still supported by the kernel. I am surprised
that support for it has not been removed from the kernel.
Remove unicore32 port.
Signed-off-by: Mike Rapoport <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This time around we have four lines of diff in the core framework,
removing a function that isn't used anymore. Otherwise the main new
thing for the common clk framework is that it is selectable in the
Kconfig language now. Hopefully this will let clk drivers and clk
consumers be testable on more than the architectures that support the
clk framework. The goal is to introduce some Kunit tests for the
framework.
Outside of the core framework we have the usual set of various driver
updates and non-critical fixes. The dirstat shows that the new
Baikal-T1 driver is the largest addition this time around in terms of
lines of code. After that the x86 (Intel), Qualcomm, and Mediatek
drivers introduce many lines to support new or upcoming SoCs. After
that the dirstat shows the usual suspects working on their SoC support
by fixing minor bugs, correcting data and converting some of their DT
bindings to YAML.
Core:
- Allow the COMMON_CLK config to be selectable
New Drivers:
- Clk driver for Baikal-T1 SoCs
- Mediatek MT6765 clock support
- Support for Intel Agilex clks
- Add support for X1830 and X1000 Ingenic SoC clk controllers
- Add support for the new Renesas RZ/G1H (R8A7742) SoC
- Add support for Qualcomm's MSM8939 Generic Clock Controller
Updates:
- Support IDT VersaClock 5P49V5925
- Bunch of updates for HSDK clock generation unit (CGU) driver
- Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
- Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
- Enable supply regulators for GPU gdscs on Qualcomm SoCs
- Add support for Si5342, Si5344 and Si5345 chips
- Support custom flags in Xilinx zynq firmware
- Various small fixes to the Xilinx clk driver
- A single minor rounding fix for the legacy Allwinner clock support
- A few patches from Abel Vesa as preparation of adding audiomix
clock support on i.MX
- A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and
clk-pllv3 drivers
- Drop dependency on ARM64 for i.MX8M clock driver, to support
aarch32 mode on aarch64 hardware
- A series from Peng Fan to improve i.MX8M clock drivers, using
composite clock for core and bus clk slice
- Set a better parent clock for flexcan on i.MX6UL to support CiA102
defined bit rates
- A couple changes for EMC frequency scaling on Tegra210
- Support for CPU frequency scaling on Tegra20/Tegra30
- New clk gate for CSI test pattern generator on Tegra210
- Regression fixes for Samsung exynos542x and exynos5433 SoCs
- Use of fallthrough; attribute for Samsung s3c24xx
- Updates and fixup HDMI and video clocks on Meson8b
- Fixup reset polarity on Meson8b
- Fix GPU glitch free mux switch on Meson gx and g12
- A minor fix for the currently unused suspend/resume handling on
Renesas RZ/A1 and RZ/A2
- Two more conversions of Renesas DT bindings to json-schema
- Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits)
clk: mediatek: Remove ifr{0,1}_cfg_regs structures
clk: baikal-t1: remove redundant assignment to variable 'divider'
clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"
dt-bindings: clock: Add a missing include to MMP Audio Clock binding
dt: Add bindings for IDT VersaClock 5P49V5925
clk: vc5: Add support for IDT VersaClock 5P49V6965
clk: Add Baikal-T1 CCU Dividers driver
clk: Add Baikal-T1 CCU PLLs driver
dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
clk: mediatek: assign the initial value to clk_init_data of mtk_mux
clk: mediatek: Add MT6765 clock support
clk: mediatek: add mt6765 clock IDs
dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
CLK: HSDK: CGU: add support for 148.5MHz clock
CLK: HSDK: CGU: support PLL bypassing
CLK: HSDK: CGU: check if PLL is bypassed first
clk: clk-si5341: Add support for the Si5345 series
...
|
|
Convert comments that reference mmap_sem to reference mmap_lock instead.
[[email protected]: fix up linux-next leftovers]
[[email protected]: s/lockaphore/lock/, per Vlastimil]
[[email protected]: more linux-next fixups, per Michel]
Signed-off-by: Michel Lespinasse <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Reviewed-by: Daniel Jordan <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Laurent Dufour <[email protected]>
Cc: Liam Howlett <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ying Han <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This change converts the existing mmap_sem rwsem calls to use the new mmap
locking API instead.
The change is generated using coccinelle with the following rule:
// spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir .
@@
expression mm;
@@
(
-init_rwsem
+mmap_init_lock
|
-down_write
+mmap_write_lock
|
-down_write_killable
+mmap_write_lock_killable
|
-down_write_trylock
+mmap_write_trylock
|
-up_write
+mmap_write_unlock
|
-downgrade_write
+mmap_write_downgrade
|
-down_read
+mmap_read_lock
|
-down_read_killable
+mmap_read_lock_killable
|
-down_read_trylock
+mmap_read_trylock
|
-up_read
+mmap_read_unlock
)
-(&mm->mmap_sem)
+(mm)
Signed-off-by: Michel Lespinasse <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Daniel Jordan <[email protected]>
Reviewed-by: Laurent Dufour <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Liam Howlett <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ying Han <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
All architectures define pte_index() as
(address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)
and all architectures define pte_offset_kernel() as an entry in the array
of PTEs indexed by the pte_index().
For the most architectures the pte_offset_kernel() implementation relies
on the availability of pmd_page_vaddr() that converts a PMD entry value to
the virtual address of the page containing PTEs array.
Let's move x86 definitions of the PTE accessors to the generic place in
<linux/pgtable.h> and then simply drop the respective definitions from the
other architectures.
The architectures that didn't provide pmd_page_vaddr() are updated to have
that defined.
The generic implementation of pte_offset_kernel() can be overridden by an
architecture and alpha makes use of this because it has special ordering
requirements for its version of pte_offset_kernel().
[[email protected]: v2]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: update]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: update]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: fix x86 warning]
[[email protected]: fix powerpc build]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The powerpc 32-bit implementation of pgtable has nice shortcuts for
accessing kernel PMD and PTE for a given virtual address. Make these
helpers available for all architectures.
[[email protected]: microblaze: fix page table traversal in setup_rt_frame()]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: s/pmd_ptr_k/pmd_off_k/ in various powerpc places]
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().
Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
As a nice side-effect - print backtrace in __die() with the same log level
as the rest of function.
[1]: https://lore.kernel.org/lkml/[email protected]/T/#u
Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Guan Xuetao <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Add log level parameter to c_backtrace() as a preparation for introducing
show_stack_loglvl()
[1]: https://lore.kernel.org/lkml/[email protected]/T/#u
Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Guan Xuetao <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The pmode parameter isn't used in assembly - remove it. Second argument
will be reused for printk() log level.
Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Guan Xuetao <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
flush_icache_user_range is only used by <asm-generic/cacheflush.h>, so
remove it from the architectures that implement it, but don't use
<asm-generic/cacheflush.h>.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Russell King <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Guan Xuetao <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
flush_cache_user_range is an ARMism not used by any generic or unicore32
specific code.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Guan Xuetao <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
- ensure to rebuild all objects when the compiler is upgraded
- exclude system headers from dependency tracking and fixdep processing
- fix potential bit-size mismatch between the kernel and BPF user-mode
helper
- add the new syntax 'userprogs' to build user-space programs for the
target architecture (the same arch as the kernel)
- compile user-space sample code under samples/ for the target arch
instead of the host arch
- make headers_install fail if a CONFIG option is leaked to user-space
- sanitize the output format of scripts/checkstack.pl
- handle ARM 'push' instruction in scripts/checkstack.pl
- error out before modpost if a module name conflict is found
- error out when multiple directories are passed to M= because this
feature is broken for a long time
- add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
- a lot of cleanups of modpost
- dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
second pass of modpost
- do not run the second pass of modpost if nothing in modules is
updated
- install modules.builtin(.modinfo) by 'make install' as well as by
'make modules_install' because it is useful even when
CONFIG_MODULES=n
- add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
to allow users to use alternatives such as pigz, pbzip2, etc.
* tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits)
kbuild: add variables for compression tools
Makefile: install modules.builtin even if CONFIG_MODULES=n
mksysmap: Fix the mismatch of '.L' symbols in System.map
kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS
modpost: change elf_info->size to size_t
modpost: remove is_vmlinux() helper
modpost: strip .o from modname before calling new_module()
modpost: set have_vmlinux in new_module()
modpost: remove mod->skip struct member
modpost: add mod->is_vmlinux struct member
modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()
modpost: remove mod->is_dot_o struct member
modpost: move -d option in scripts/Makefile.modpost
modpost: remove -s option
modpost: remove get_next_text() and make {grab,release_}file static
modpost: use read_text_file() and get_line() for reading text files
modpost: avoid false-positive file open error
modpost: fix potential mmap'ed file overrun in get_src_version()
modpost: add read_text_file() and get_line() helpers
modpost: do not call get_modinfo() for vmlinux(.o)
...
|
|
The unicore32 architecture has 2 level page tables and
asm-generic/pgtable-nopmd.h and explicit casts from pud_t to pgd_t for
page table folding.
Add p4d walk in the only place that actually unfolds the pud level and
remove __ARCH_USE_5LEVEL_HACK.
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: James Morse <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Julien Thierry <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Stefan Kristiansson <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
free_area_init() only requires the definition of maximal PFN for each of
the supported zone rater than calculation of actual zone sizes and the
sizes of the holes between the zones.
After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP the free_area_init() is
available to all architectures.
Using this function instead of free_area_init_node() simplifies the zone
detection.
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Hoan Tran <[email protected]> [arm64]
Cc: Baoquan He <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Since commit a83e4ca26af8 ("kbuild: remove cc-option switch from
-Wframe-larger-than="), 'make ARCH=unicore32 clean' emits error
messages as follows:
$ make ARCH=unicore32 clean
gcc: error: missing argument to '-Wframe-larger-than='
gcc: error: missing argument to '-Wframe-larger-than='
We do not care compiler flags when cleaning.
Use the '=' operator for lazy expansion because we do not use
GNU_LIBC_A or GNU_LIBGCC_A when cleaning.
Fixes: a83e4ca26af8 ("kbuild: remove cc-option switch from -Wframe-larger-than=")
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
|
|
<linux/cryptohash.h> sounds very generic and important, like it's the
header to include if you're doing cryptographic hashing in the kernel.
But actually it only includes the library implementation of the SHA-1
compression function (not even the full SHA-1). This should basically
never be used anymore; SHA-1 is no longer considered secure, and there
are much better ways to do cryptographic hashing in the kernel.
Most files that include this header don't actually need it. So in
preparation for removing it, remove all these unneeded includes of it.
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Enable build testing and configuration control of the common clk
framework so that more code coverage and testing can be done on the
common clk framework across various architectures. This also nicely
removes the requirement that architectures must select the framework
when they don't use it in architecture code.
There's one snag with doing this, and that's making sure that randconfig
builds don't select this option when some architecture or platform
implements 'struct clk' outside of the common clk framework. Introduce a
new config option 'HAVE_LEGACY_CLK' to indicate those platforms that
haven't migrated to the common clk framework and therefore shouldn't be
allowed to select this new config option. Also add a note that we hope
one day to remove this config entirely.
Based on a patch by Mark Brown <[email protected]>.
Cc: Mark Brown <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Aurelien Jacquiot <[email protected]>
Cc: Jiaxun Yang <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Russell King <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Reviewed-by: Mark Brown <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
|
|
Currently there are many platforms that dont enable ARCH_HAS_PTE_SPECIAL
but required to define quite similar fallback stubs for special page
table entry helpers such as pte_special() and pte_mkspecial(), as they
get build in generic MM without a config check. This creates two
generic fallback stub definitions for these helpers, eliminating much
code duplication.
mips platform has a special case where pte_special() and pte_mkspecial()
visibility is wider than what ARCH_HAS_PTE_SPECIAL enablement requires.
This restricts those symbol visibility in order to avoid redefinitions
which is now exposed through this new generic stubs and subsequent build
failure. arm platform set_pte_at() definition needs to be moved into a
C file just to prevent a build failure.
[[email protected]: use defined(CONFIG_ARCH_HAS_PTE_SPECIAL) in mips per Thomas]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Anshuman Khandual <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Guo Ren <[email protected]> [csky]
Acked-by: Geert Uytterhoeven <[email protected]> [m68k]
Acked-by: Stafford Horne <[email protected]> [openrisc]
Acked-by: Helge Deller <[email protected]> [parisc]
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Russell King <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Sam Creasey <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Stefan Kristiansson <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
There are many places where all basic VMA access flags (read, write,
exec) are initialized or checked against as a group. One such example
is during page fault. Existing vma_is_accessible() wrapper already
creates the notion of VMA accessibility as a group access permissions.
Hence lets just create VM_ACCESS_FLAGS (VM_READ|VM_WRITE|VM_EXEC) which
will not only reduce code duplication but also extend the VMA
accessibility concept in general.
Signed-off-by: Anshuman Khandual <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Cc: Russell King <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Rob Springer <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS
This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the
existing VM_STACK_DEFAULT_FLAGS. While here, also define some more
macros with standard VMA access flag combinations that are used
frequently across many platforms. Apart from simplification, this
reduces code duplication as well.
Signed-off-by: Anshuman Khandual <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Russell King <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Chris Zankel <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Switch pwm_bl and corgi_lcd drivers to use GPIO descriptors"
* tag 'backlight-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: corgi: Convert to use GPIO descriptors
backlight: pwm_bl: Switch to full GPIO descriptor
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
|
|
The idea comes from a discussion between Linus and Andrea [1].
Before this patch we only allow a page fault to retry once. We achieved
this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing
handle_mm_fault() the second time. This was majorly used to avoid
unexpected starvation of the system by looping over forever to handle the
page fault on a single page. However that should hardly happen, and after
all for each code path to return a VM_FAULT_RETRY we'll first wait for a
condition (during which time we should possibly yield the cpu) to happen
before VM_FAULT_RETRY is really returned.
This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY
flag when we receive VM_FAULT_RETRY. It means that the page fault handler
now can retry the page fault for multiple times if necessary without the
need to generate another page fault event. Meanwhile we still keep the
FAULT_FLAG_TRIED flag so page fault handler can still identify whether a
page fault is the first attempt or not.
Then we'll have these combinations of fault flags (only considering
ALLOW_RETRY flag and TRIED flag):
- ALLOW_RETRY and !TRIED: this means the page fault allows to
retry, and this is the first try
- ALLOW_RETRY and TRIED: this means the page fault allows to
retry, and this is not the first try
- !ALLOW_RETRY and !TRIED: this means the page fault does not allow
to retry at all
- !ALLOW_RETRY and TRIED: this is forbidden and should never be used
In existing code we have multiple places that has taken special care of
the first condition above by checking against (fault_flags &
FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect
the first retry of a page fault by checking against both (fault_flags &
FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now
even the 2nd try will have the ALLOW_RETRY set, then use that helper in
all existing special paths. One example is in __lock_page_or_retry(), now
we'll drop the mmap_sem only in the first attempt of page fault and we'll
keep it in follow up retries, so old locking behavior will be retained.
This will be a nice enhancement for current code [2] at the same time a
supporting material for the future userfaultfd-writeprotect work, since in
that work there will always be an explicit userfault writeprotect retry
for protected pages, and if that cannot resolve the page fault (e.g., when
userfaultfd-writeprotect is used in conjunction with swapped pages) then
we'll possibly need a 3rd retry of the page fault. It might also benefit
other potential users who will have similar requirement like userfault
write-protection.
GUP code is not touched yet and will be covered in follow up patch.
Please read the thread below for more information.
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
Suggested-by: Linus Torvalds <[email protected]>
Suggested-by: Andrea Arcangeli <[email protected]>
Signed-off-by: Peter Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Brian Geffon <[email protected]>
Cc: Bobby Powers <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Denis Plotnikov <[email protected]>
Cc: "Dr . David Alan Gilbert" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Martin Cracauer <[email protected]>
Cc: Marty McFadden <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Maya Gokhale <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Although there're tons of arch-specific page fault handlers, most of them
are still sharing the same initial value of the page fault flags. Say,
merely all of the page fault handlers would allow the fault to be retried,
and they also allow the fault to respond to SIGKILL.
Let's define a default value for the fault flags to replace those initial
page fault flags that were copied over. With this, it'll be far easier to
introduce new fault flag that can be used by all the architectures instead
of touching all the archs.
Signed-off-by: Peter Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Brian Geffon <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Bobby Powers <[email protected]>
Cc: Denis Plotnikov <[email protected]>
Cc: "Dr . David Alan Gilbert" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Martin Cracauer <[email protected]>
Cc: Marty McFadden <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Maya Gokhale <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
For most architectures, we've got a quick path to detect fatal signal
after a handle_mm_fault(). Introduce a helper for that quick path.
It cleans the current codes a bit so we don't need to duplicate the same
check across archs. More importantly, this will be an unified place that
we handle the signal immediately right after an interrupted page fault, so
it'll be much easier for us if we want to change the behavior of handling
signals later on for all the archs.
Note that currently only part of the archs are using this new helper,
because some archs have their own way to handle signals. In the follow up
patches, we'll try to apply this helper to all the rest of archs.
Another note is that the "regs" parameter in the new helper is not used
yet. It'll be used very soon. Now we kept it in this patch only to avoid
touching all the archs again in the follow up patches.
[[email protected]: fix sparse warnings]
Link: http://lkml.kernel.org/r/20200311145921.GD479302@xz-x1
Signed-off-by: Peter Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Brian Geffon <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Bobby Powers <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Denis Plotnikov <[email protected]>
Cc: "Dr . David Alan Gilbert" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Martin Cracauer <[email protected]>
Cc: Marty McFadden <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Maya Gokhale <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Change a header to mandatory-y if both of the following are met:
[1] At least one architecture (except um) specifies it as generic-y in
arch/*/include/asm/Kbuild
[2] Every architecture (except um) either has its own implementation
(arch/*/include/asm/*.h) or specifies it as generic-y in
arch/*/include/asm/Kbuild
This commit was generated by the following shell script.
----------------------------------->8-----------------------------------
arches=$(cd arch; ls -1 | sed -e '/Kconfig/d' -e '/um/d')
tmpfile=$(mktemp)
grep "^mandatory-y +=" include/asm-generic/Kbuild > $tmpfile
find arch -path 'arch/*/include/asm/Kbuild' |
xargs sed -n 's/^generic-y += \(.*\)/\1/p' | sort -u |
while read header
do
mandatory=yes
for arch in $arches
do
if ! grep -q "generic-y += $header" arch/$arch/include/asm/Kbuild &&
! [ -f arch/$arch/include/asm/$header ]; then
mandatory=no
break
fi
done
if [ "$mandatory" = yes ]; then
echo "mandatory-y += $header" >> $tmpfile
for arch in $arches
do
sed -i "/generic-y += $header/d" arch/$arch/include/asm/Kbuild
done
fi
done
sed -i '/^mandatory-y +=/d' include/asm-generic/Kbuild
LANG=C sort $tmpfile >> include/asm-generic/Kbuild
----------------------------------->8-----------------------------------
One obvious benefit is the diff stat:
25 files changed, 52 insertions(+), 557 deletions(-)
It is tedious to list generic-y for each arch that needs it.
So, mandatory-y works like a fallback default (by just wrapping
asm-generic one) when arch does not have a specific header
implementation.
See the following commits:
def3f7cefe4e81c296090e1722a76551142c227c
a1b39bae16a62ce4aae02d958224f19316d98b24
It is tedious to convert headers one by one, so I processed by a shell
script.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Treewide:
- Cleanup of setup_irq() which is not longer required because the
memory allocator is available early.
Most cleanup changes come through the various maintainer trees, so
the final removal of setup_irq() is postponed towards the end of
the merge window.
Core:
- Protection against unsafe invocation of interrupt handlers and
unsafe interrupt injection including a fixup of the offending
PCI/AER error injection mechanism.
Invoking interrupt handlers from arbitrary contexts, i.e. outside
of an actual interrupt, can cause inconsistent state on the
fragile x86 interrupt affinity changing hardware trainwreck.
Drivers:
- Second wave of support for the new ARM GICv4.1
- Multi-instance support for Xilinx and PLIC interrupt controllers
- CPU-Hotplug support for PLIC
- The obligatory new driver for X1000 TCU
- Enhancements, cleanups and fixes all over the place"
* tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
unicore32: Replace setup_irq() by request_irq()
sh: Replace setup_irq() by request_irq()
hexagon: Replace setup_irq() by request_irq()
c6x: Replace setup_irq() by request_irq()
alpha: Replace setup_irq() by request_irq()
irqchip/gic-v4.1: Eagerly vmap vPEs
irqchip/gic-v4.1: Add VSGI property setup
irqchip/gic-v4.1: Add VSGI allocation/teardown
irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer
irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks
irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks
irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks
irqchip/gic-v4.1: Add initial SGI configuration
irqchip/gic-v4.1: Plumb skeletal VSGI irqchip
irqchip/stm32: Retrigger both in eoi and unmask callbacks
irqchip/gic-v3: Move irq_domain_update_bus_token to after checking for NULL domain
irqchip/xilinx: Do not call irq_set_default_host()
irqchip/xilinx: Enable generic irq multi handler
irqchip/xilinx: Fill error code when irq domain registration fails
irqchip/xilinx: Add support for multiple instances
...
|
|
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
setup_irq() was required in older kernels as the memory allocator was not
available during early boot.
Hence replace setup_irq() by request_irq().
Signed-off-by: afzal mohammed <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/82667ae23520611b2a9d8db77e1d8aeb982f08e5.1585320721.git.afzal.mohd.ma@gmail.com
|
|
Add SPDX License Identifier to all .gitignore files.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The PWM backlight still supports passing a enable GPIO line as
platform data using the legacy <linux/gpio.h> API.
It turns out that ever board using this mechanism except one
is pass .enable_gpio = -1. So we drop all these cargo-culted -1's
from all instances of this platform data in the kernel.
The remaning board, Palm TC, is converted to pass a machine
descriptior table with the "enable" GPIO instead, and delete the
platform data entry for enable_gpio and the code handling it
and things should work smoothly with the new API.
Signed-off-by: Linus Walleij <[email protected]>
Acked-by: Robert Jarzmik <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]
Reviewed-by: Bartosz Golaszewski <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
|
|
Those files got moved, but cross-references still point to the
wrong places.
Fixes: fcd680727157 ("Documentation: Add io-mapping.rst to driver-api manual")
Fixes: d1ce350015d8 ("Documentation: Add io_ordering.rst to driver-api manual")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Reviewed-by: Alex Shi <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/c0205119db4fef536272cb0a183b6c14c2c8bf4c.1583927470.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx
Pull x86 MPX removal from Dave Hansen:
"MPX requires recompiling applications, which requires compiler
support. Unfortunately, GCC 9.1 is expected to be be released without
support for MPX. This means that there was only a relatively small
window where folks could have ever used MPX. It failed to gain wide
adoption in the industry, and Linux was the only mainstream OS to ever
support it widely.
Support for the feature may also disappear on future processors.
This set completes the process that we started during the 5.4 merge
window when the MPX prctl()s were removed. XSAVE support is left in
place, which allows MPX-using KVM guests to continue to function"
* tag 'mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx:
x86/mpx: remove MPX from arch/x86
mm: remove arch_bprm_mm_init() hook
x86/mpx: remove bounds exception code
x86/mpx: remove build infrastructure
x86/alternatives: add missing insn.h include
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here are the big set of tty and serial driver updates for 5.6-rc1
Included in here are:
- dummy_con cleanups (touches lots of arch code)
- sysrq logic cleanups (touches lots of serial drivers)
- samsung driver fixes (wasn't really being built)
- conmakeshash move to tty subdir out of scripts
- lots of small tty/serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits)
tty: n_hdlc: Use flexible-array member and struct_size() helper
tty: baudrate: SPARC supports few more baud rates
tty: baudrate: Synchronise baud_table[] and baud_bits[]
tty: serial: meson_uart: Add support for kernel debugger
serial: imx: fix a race condition in receive path
serial: 8250_bcm2835aux: Document struct bcm2835aux_data
serial: 8250_bcm2835aux: Use generic remapping code
serial: 8250_bcm2835aux: Allocate uart_8250_port on stack
serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Fix line mismatch on driver unbind
serial_core: Remove unused member in uart_port
vt: Correct comment documenting do_take_over_console()
vt: Delete comment referencing non-existent unbind_con_driver()
arch/xtensa/setup: Drop dummy_con initialization
arch/x86/setup: Drop dummy_con initialization
arch/unicore32/setup: Drop dummy_con initialization
arch/sparc/setup: Drop dummy_con initialization
arch/sh/setup: Drop dummy_con initialization
arch/s390/setup: Drop dummy_con initialization
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
"The main changes in this cycle were:
- Cleanup of the GOP [graphics output] handling code in the EFI stub
- Complete refactoring of the mixed mode handling in the x86 EFI stub
- Overhaul of the x86 EFI boot/runtime code
- Increase robustness for mixed mode code
- Add the ability to disable DMA at the root port level in the EFI
stub
- Get rid of RWX mappings in the EFI memory map and page tables,
where possible
- Move the support code for the old EFI memory mapping style into its
only user, the SGI UV1+ support code.
- plus misc fixes, updates, smaller cleanups.
... and due to interactions with the RWX changes, another round of PAT
cleanups make a guest appearance via the EFI tree - with no side
effects intended"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
efi/x86: Disable instrumentation in the EFI runtime handling code
efi/libstub/x86: Fix EFI server boot failure
efi/x86: Disallow efi=old_map in mixed mode
x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld
efi/x86: avoid KASAN false positives when accessing the 1: 1 mapping
efi: Fix handling of multiple efi_fake_mem= entries
efi: Fix efi_memmap_alloc() leaks
efi: Add tracking for dynamically allocated memmaps
efi: Add a flags parameter to efi_memory_map
efi: Fix comment for efi_mem_type() wrt absent physical addresses
efi/arm: Defer probe of PCIe backed efifb on DT systems
efi/x86: Limit EFI old memory map to SGI UV machines
efi/x86: Avoid RWX mappings for all of DRAM
efi/x86: Don't map the entire kernel text RW for mixed mode
x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd
efi/libstub/x86: Fix unused-variable warning
efi/libstub/x86: Use mandatory 16-byte stack alignment in mixed mode
efi/libstub/x86: Use const attribute for efi_is_64bit()
efi: Allow disabling PCI busmastering on bridges during boot
efi/x86: Allow translating 64-bit arguments for mixed mode calls
...
|
|
From: Dave Hansen <[email protected]>
MPX is being removed from the kernel due to a lack of support
in the toolchain going forward (gcc).
arch_bprm_mm_init() is used at execve() time. The only non-stub
implementation is on x86 for MPX. Remove the hook entirely from
all architectures and generic code.
Cc: Peter Zijlstra (Intel) <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: [email protected]
Cc: Linus Torvalds <[email protected]>
Cc: [email protected]
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
|
|
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset.
Drop it from arch setup code.
Signed-off-by: Arvind Sankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
|
|
<linux/vmalloc.h>
In the x86 MM code we'd like to untangle various types of historic
header dependency spaghetti, but for this we'd need to pass to
the generic vmalloc code various vmalloc related defines that
customarily come via the <asm/page.h> low level arch header.
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Pull generic ioremap support from Christoph Hellwig:
"This adds the remaining bits for an entirely generic ioremap and
iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant
mess of weird ioremap variants we had with no users outside the arch
code.
For now just the three newest ports use the code, but there is more
than a handful others that can be converted without too much work.
Summary:
- clean up various obsolete ioremap and iounmap variants
- add a new generic ioremap implementation and switch csky, nds32 and
riscv over to it"
* tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits)
nds32: use generic ioremap
csky: use generic ioremap
csky: remove ioremap_cache
riscv: use the generic ioremap code
lib: provide a simple generic ioremap implementation
sh: remove __iounmap
nios2: remove __iounmap
hexagon: remove __iounmap
m68k: rename __iounmap and mark it static
arch: rely on asm-generic/io.h for default ioremap_* definitions
asm-generic: don't provide ioremap for CONFIG_MMU
asm-generic: ioremap_uc should behave the same with and without MMU
xtensa: clean up ioremap
x86: Clean up ioremap()
parisc: remove __ioremap
nios2: remove __ioremap
alpha: remove the unused __ioremap wrapper
hexagon: clean up ioremap
ia64: rename ioremap_nocache to ioremap_uc
unicore32: remove ioremap_cached
...
|
|
No users of ioremap_cached are left, remove it.
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
Rename RW_DATA_SECTION to RW_DATA. (Calling this a "section" is a lie,
since it's multiple sections and section flags cannot be applied to
the macro.)
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Heiko Carstens <[email protected]> # s390
Acked-by: Geert Uytterhoeven <[email protected]> # m68k
Cc: Andy Lutomirski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Rick Edgecombe <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: x86-ml <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Finish renaming RO_DATA_SECTION to RO_DATA. (Calling this a "section"
is a lie, since it's multiple sections and section flags cannot be
applied to the macro.)
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Heiko Carstens <[email protected]> # s390
Acked-by: Geert Uytterhoeven <[email protected]> # m68k
Cc: Andy Lutomirski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Rick Edgecombe <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: x86-ml <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The .notes section should be non-executable read-only data. As such,
move it to the RO_DATA macro instead of being per-architecture defined.
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Heiko Carstens <[email protected]> # s390
Cc: Andy Lutomirski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Rick Edgecombe <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: x86-ml <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The naming of pgtable_page_{ctor,dtor}() seems to have confused a few
people, and until recently arm64 used these erroneously/pointlessly for
other levels of page table.
To make it incredibly clear that these only apply to the PTE level, and to
align with the naming of pgtable_pmd_page_{ctor,dtor}(), let's rename them
to pgtable_pte_page_{ctor,dtor}().
These changes were generated with the following shell script:
----
git grep -lw 'pgtable_page_.tor' | while read FILE; do
sed -i '{s/pgtable_page_ctor/pgtable_pte_page_ctor/}' $FILE;
sed -i '{s/pgtable_page_dtor/pgtable_pte_page_dtor/}' $FILE;
done
----
... with the documentation re-flowed to remain under 80 columns, and
whitespace fixed up in macros to keep backslashes aligned.
There should be no functional change as a result of this patch.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Mike Rapoport <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]> [m68k]
Cc: Anshuman Khandual <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Yu Zhao <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Both pgtable_cache_init() and pgd_cache_init() are used to initialize kmem
cache for page table allocations on several architectures that do not use
PAGE_SIZE tables for one or more levels of the page table hierarchy.
Most architectures do not implement these functions and use __weak default
NOP implementation of pgd_cache_init(). Since there is no such default
for pgtable_cache_init(), its empty stub is duplicated among most
architectures.
Rename the definitions of pgd_cache_init() to pgtable_cache_init() and
drop empty stubs of pgtable_cache_init().
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Acked-by: Will Deacon <[email protected]> [arm64]
Acked-by: Thomas Gleixner <[email protected]> [x86]
Cc: Catalin Marinas <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "mm: remove quicklist page table caches".
A while ago Nicholas proposed to remove quicklist page table caches [1].
I've rebased his patch on the curren upstream and switched ia64 and sh to
use generic versions of PTE allocation.
[1] https://lore.kernel.org/linux-mm/[email protected]
This patch (of 3):
Remove page table allocator "quicklists". These have been around for a
long time, but have not got much traction in the last decade and are only
used on ia64 and sh architectures.
The numbers in the initial commit look interesting but probably don't
apply anymore. If anybody wants to resurrect this it's in the git
history, but it's unhelpful to have this code and divergent allocator
behaviour for minor archs.
Also it might be better to instead make more general improvements to page
allocator if this is still so slow.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Mike Rapoport <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|