aboutsummaryrefslogtreecommitdiff
path: root/arch/s390/kernel/topology.c
AgeCommit message (Collapse)AuthorFilesLines
2024-08-29s390/hiperdispatch: Introduce hiperdispatchMete Durlu1-4/+14
When LPAR is in vertical polarization, CPUs get different polarization values, namely vertical high, vertical medium and vertical low. These values represent the likelyhood of the CPU getting physical runtime. Vertical high CPUs will always get runtime and others get varying runtime depending on the load the CEC is under. Vertical high and vertical medium CPUs are considered the CPUs which the current LPAR has the entitlement to run on. The vertical lows are on the other hand are borrowed CPUs which would only be given to the LPAR by hipervisor when the other LPARs are not utilizing them. Using the CPU capacities, hint linux scheduler when it should prioritise vertical high and vertical medium CPUs over vertical low CPUs. By tracking various system statistics hiperdispatch determines when to adjust cpu capacities. After each adjustment, rebuilding of scheduler domains is necessary to notify the scheduler about capacity changes but since this operation is costly it should be done as sparsely as possible. Acked-by: Vasily Gorbik <gor@linux.ibm.com> Co-developed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2024-08-29s390/topology: Add config option to switch to vertical during bootTobias Huschle1-0/+2
By default, all systems on s390 start in horizontal cpu polarization. Selecting the new config option SCHED_TOPOLOGY_VERTICAL allows to build a kernel that switches to vertical polarization during boot. Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2024-08-29s390/topology: Add sysctl handler for polarizationTobias Huschle1-13/+45
Provide an additional path to set the polarization of the system, such that a user no longer relies on the sysfs interface only and is able configure the polarization for every reboot via sysctl control files. The new sysctl can be set as follows: - s390.polarization=0 for horizontal polarization - s390.polarization=1 for vertical polarization Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2024-07-24sysctl: treewide: constify the ctl_table argument of proc_handlersJoel Granados1-1/+1
const qualify the struct ctl_table argument in the proc_handler function signatures. This is a prerequisite to moving the static ctl_table structs into .rodata data which will ensure that proc_handler function pointers cannot be modified. This patch has been generated by the following coccinelle script: ``` virtual patch @r1@ identifier ctl, write, buffer, lenp, ppos; identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)"; @@ int func( - struct ctl_table *ctl + const struct ctl_table *ctl ,int write, void *buffer, size_t *lenp, loff_t *ppos); @r2@ identifier func, ctl, write, buffer, lenp, ppos; @@ int func( - struct ctl_table *ctl + const struct ctl_table *ctl ,int write, void *buffer, size_t *lenp, loff_t *ppos) { ... } @r3@ identifier func; @@ int func( - struct ctl_table * + const struct ctl_table * ,int , void *, size_t *, loff_t *); @r4@ identifier func, ctl; @@ int func( - struct ctl_table *ctl + const struct ctl_table *ctl ,int , void *, size_t *, loff_t *); @r5@ identifier func, write, buffer, lenp, ppos; @@ int func( - struct ctl_table * + const struct ctl_table * ,int write, void *buffer, size_t *lenp, loff_t *ppos); ``` * Code formatting was adjusted in xfs_sysctl.c to comply with code conventions. The xfs_stats_clear_proc_handler, xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where adjusted. * The ctl_table argument in proc_watchdog_common was const qualified. This is called from a proc_handler itself and is calling back into another proc_handler, making it necessary to change it as part of the proc_handler migration. Co-developed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Co-developed-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Joel Granados <j.granados@samsung.com>
2024-07-02s390/topology: Remove CPU KOBJ_CHANGE ueventsMete Durlu1-7/+1
s390 generates KOBJ_CHANGE uevents on CPUs whenever a topology update occurs. These uevents currently have no users and they are also not present on other architectures. As they are not necessary, remove these extra uevents. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-11-01Merge tag 'sysctl-6.7-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "To help make the move of sysctls out of kernel/sysctl.c not incur a size penalty sysctl has been changed to allow us to not require the sentinel, the final empty element on the sysctl array. Joel Granados has been doing all this work. On the v6.6 kernel we got the major infrastructure changes required to support this. For v6.7-rc1 we have all arch/ and drivers/ modified to remove the sentinel. Both arch and driver changes have been on linux-next for a bit less than a month. It is worth re-iterating the value: - this helps reduce the overall build time size of the kernel and run time memory consumed by the kernel by about ~64 bytes per array - the extra 64-byte penalty is no longer inncurred now when we move sysctls out from kernel/sysctl.c to their own files For v6.8-rc1 expect removal of all the sentinels and also then the unneeded check for procname == NULL. The last two patches are fixes recently merged by Krister Johansen which allow us again to use softlockup_panic early on boot. This used to work but the alias work broke it. This is useful for folks who want to detect softlockups super early rather than wait and spend money on cloud solutions with nothing but an eventual hung kernel. Although this hadn't gone through linux-next it's also a stable fix, so we might as well roll through the fixes now" * tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits) watchdog: move softlockup_panic back to early_param proc: sysctl: prevent aliased sysctls from getting passed to init intel drm: Remove now superfluous sentinel element from ctl_table array Drivers: hv: Remove now superfluous sentinel element from ctl_table array raid: Remove now superfluous sentinel element from ctl_table array fw loader: Remove the now superfluous sentinel element from ctl_table array sgi-xp: Remove the now superfluous sentinel element from ctl_table array vrf: Remove the now superfluous sentinel element from ctl_table array char-misc: Remove the now superfluous sentinel element from ctl_table array infiniband: Remove the now superfluous sentinel element from ctl_table array macintosh: Remove the now superfluous sentinel element from ctl_table array parport: Remove the now superfluous sentinel element from ctl_table array scsi: Remove now superfluous sentinel element from ctl_table array tty: Remove now superfluous sentinel element from ctl_table array xen: Remove now superfluous sentinel element from ctl_table array hpet: Remove now superfluous sentinel element from ctl_table array c-sky: Remove now superfluous sentinel element from ctl_talbe array powerpc: Remove now superfluous sentinel element from ctl_table arrays riscv: Remove now superfluous sentinel element from ctl_table array x86/vdso: Remove now superfluous sentinel element from ctl_table array ...
2023-10-12sched/topology: Rename 'DIE' domain to 'PKG'Peter Zijlstra1-1/+1
While reworking the x86 topology code Thomas tripped over creating a 'DIE' domain for the package mask. :-) Since these names are CONFIG_SCHED_DEBUG=y only, rename them to make the name less ambiguous. [ Shrikanth Hegde: rename on s390 as well. ] [ Valentin Schneider: also rename it in the comments. ] [ mingo: port to recent kernels & find all remaining occurances. ] Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Valentin Schneider <vschneid@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/20230712141056.GI3100107@hirez.programming.kicks-ass.net
2023-10-10S390: Remove now superfluous sentinel elem from ctl_table arraysJoel Granados1-1/+0
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) Remove the sentinel element from appldata_table, s390dbf_table, topology_ctl_table, cmm_table and page_table_sysctl. Reduced the memory allocation in appldata_register_ops by 1 effectively removing the sentinel from ops->ctl_table. This removal is safe because register_sysctl_sz and register_sysctl use the array size in addition to checking for the sentinel. Tested-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-05-15s390/topology: honour nr_cpu_ids when adding CPUsAlexander Gordeev1-15/+17
When SMT thread CPUs are added to CPU masks the nr_cpu_ids limit is not checked and could be exceeded. This leads to a warning for example if CONFIG_DEBUG_PER_CPU_MAPS is set and the command line parameter nr_cpus is set to 1. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-04-30Merge tag 's390-6.4-1' of ↵Linus Torvalds1-11/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add support for stackleak feature. Also allow specifying architecture-specific stackleak poison function to enable faster implementation. On s390, the mvc-based implementation helps decrease typical overhead from a factor of 3 to just 25% - Convert all assembler files to use SYM* style macros, deprecating the ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS - Improve KASLR to also randomize module and special amode31 code base load addresses - Rework decompressor memory tracking to support memory holes and improve error handling - Add support for protected virtualization AP binding - Add support for set_direct_map() calls - Implement set_memory_rox() and noexec module_alloc() - Remove obsolete overriding of mem*() functions for KASAN - Rework kexec/kdump to avoid using nodat_stack to call purgatory - Convert the rest of the s390 code to use flexible-array member instead of a zero-length array - Clean up uaccess inline asm - Enable ARCH_HAS_MEMBARRIER_SYNC_CORE - Convert to using CONFIG_FUNCTION_ALIGNMENT and enable DEBUG_FORCE_FUNCTION_ALIGN_64B - Resolve last_break in userspace fault reports - Simplify one-level sysctl registration - Clean up branch prediction handling - Rework CPU counter facility to retrieve available counter sets just once - Other various small fixes and improvements all over the code * tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (118 commits) s390/stackleak: provide fast __stackleak_poison() implementation stackleak: allow to specify arch specific stackleak poison function s390: select ARCH_USE_SYM_ANNOTATIONS s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc() s390: wire up memfd_secret system call s390/mm: enable ARCH_HAS_SET_DIRECT_MAP s390/mm: use BIT macro to generate SET_MEMORY bit masks s390/relocate_kernel: adjust indentation s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc. s390/entry: use SYM* macros instead of ENTRY(), etc. s390/purgatory: use SYM* macros instead of ENTRY(), etc. s390/kprobes: use SYM* macros instead of ENTRY(), etc. s390/reipl: use SYM* macros instead of ENTRY(), etc. s390/head64: use SYM* macros instead of ENTRY(), etc. s390/earlypgm: use SYM* macros instead of ENTRY(), etc. s390/mcount: use SYM* macros instead of ENTRY(), etc. s390/crc32le: use SYM* macros instead of ENTRY(), etc. s390/crc32be: use SYM* macros instead of ENTRY(), etc. s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc. s390/amode31: use SYM* macros instead of ENTRY(), etc. ...
2023-03-20s390: simplify one-level sysctl registration for topology_ctl_tableLuis Chamberlain1-11/+1
There is no need to declare an extra tables to just create directory, this can be easily be done with a prefix path with register_sysctl(). Simplify this registration. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20230310234525.3986352-2-mcgrof@kernel.org Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-03-17s390/topology: move to use bus_get_dev_root()Greg Kroah-Hartman1-1/+10
Direct access to the struct bus_type dev_root pointer is going away soon so replace that with a call to bus_get_dev_root() instead, which is what it is there for. Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: linux-s390@vger.kernel.org Acked-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20230313182918.1312597-18-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-06s390: remove invalid email address of Heiko CarstensHeiko Carstens1-1/+0
Remove my old invalid email address which can be found in a couple of files. Instead of updating it, just remove my contact data completely from source files. We have git and other tools which allow to figure out who is responsible for what with recent contact data. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-09-07s390/topology: fix topology information when calling cpu hotplug notifiersSven Schnelle1-6/+7
The cpu hotplug notifiers are called without updating the core/thread masks when a new CPU is added. This causes problems with code setting up data structures in a cpu hotplug notifier, and relying on that later in normal code. This caused a crash in the new core scheduling code (SCHED_CORE), where rq->core was set up in a notifier depending on cpu masks. To fix this, add a cpu_setup_mask which is used in update_cpu_masks() instead of the cpu_online_mask to determine whether the cpu masks should be set for a certain cpu. Also move update_cpu_masks() to update the masks before calling notify_cpu_starting() so that the notifiers are seeing the updated masks. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Cc: <stable@vger.kernel.org> [hca@linux.ibm.com: get rid of cpu_online_mask handling] Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-05s390: replace deprecated CPU-hotplug functionsSebastian Andrzej Siewior1-2/+2
The functions get_online_cpus() and put_online_cpus() have been deprecated during the CPU hotplug rework. They map directly to cpus_read_lock() and cpus_read_unlock(). Replace deprecated CPU-hotplug functions with the official version. The behavior remains unchanged. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20210803141621.780504-5-bigeasy@linutronix.de Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-06-21s390/topology: clear thread/group maps for offline cpusSven Schnelle1-3/+9
The current code doesn't clear the thread/group maps for offline CPUs. This may cause kernel crashes like the one bewlow in common code that assumes if a CPU has sibblings it is online. Unable to handle kernel pointer dereference in virtual kernel address space Call Trace: [<000000013a4b8c3c>] blk_mq_map_swqueue+0x10c/0x388 ([<000000013a4b8bcc>] blk_mq_map_swqueue+0x9c/0x388) [<000000013a4b9300>] blk_mq_init_allocated_queue+0x448/0x478 [<000000013a4b9416>] blk_mq_init_queue+0x4e/0x90 [<000003ff8019d3e6>] loop_add+0x106/0x278 [loop] [<000003ff801b8148>] loop_init+0x148/0x1000 [loop] [<0000000139de4924>] do_one_initcall+0x3c/0x1e0 [<0000000139ef449a>] do_init_module+0x6a/0x2a0 [<0000000139ef61bc>] __do_sys_finit_module+0xa4/0xc0 [<0000000139de9e6e>] do_syscall+0x7e/0xd0 [<000000013a8e0aec>] __do_syscall+0xbc/0x110 [<000000013a8ee2e8>] system_call+0x78/0xa0 Fixes: 52aeda7accb6 ("s390/topology: remove offline CPUs from CPU topology masks") Cc: <stable@kernel.org> # 5.7+ Reported-by: Marius Hillenbrand <mhillen@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-03-08s390/topology: remove always false if checkHeiko Carstens1-2/+0
The cpumask being checked in cpu_group_map() must have at least one cpu set; therefore remove the check. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-02-24s390/topology: move cpumasks away from stackHeiko Carstens1-12/+13
Make cpumasks static variables to avoid potential large stack frames. There shouldn't be any concurrent callers since all current callers are serialized with the cpu hotplug lock. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-29s390: convert to msecs_to_jiffies()Sven Schnelle1-2/+2
Instead of using the old 'jiffies + HZ {/,*} something' calculation use msecs_to_jiffies() as that makes the code more readable. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-04-27sysctl: pass kernel pointers to ->proc_handlerChristoph Hellwig1-1/+1
Instead of having all the sysctl handlers deal with user pointers, which is rather hairy in terms of the BPF interaction, copy the input to and from userspace in common code. This also means that the strings are always NUL-terminated by the common code, making the API a little bit safer. As most handler just pass through the data to one of the common handlers a lot of the changes are mechnical. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-03-25s390: use fallthrough;Joe Perches1-1/+1
Convert the various uses of fallthrough comments to fallthrough; Done via script Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe.com/ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-23s390/cpuinfo: show number of online coresAlexander Gordeev1-2/+18
Show number of cores that run at least one SMT thread Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-23s390/topology: remove offline CPUs from CPU topology masksAlexander Gordeev1-1/+3
The CPU topology masks on s390 contain also bits of CPUs which are offline. Currently this is already a problem, since common code scheduler expects e.g. cpu_smt_mask() to reflect reality. This update changes the described behaviour and s390 starts to behave like all other architectures. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-23s390/numa: remove redundant cpus_with_topology variableAlexander Gordeev1-6/+0
Variable cpus_with_topology is a leftover that became unneeded once the fake NUMA support has been removed. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-27s390/mm: remove fake numa supportHeiko Carstens1-2/+0
It turned out that fake numa support is rather useless on s390, since there are no scenarios where there is any performance or other benefit when used. However it does provide maintenance cost and breaks from time to time. Therefore remove it. CONFIG_NUMA is still supported with a very small backend and only one node. This way userspace applications which require NUMA interfaces continue to work. Note that NODES_SHIFT is set to 1 (= 2 nodes) instead of 0 (= 1 node), since there is quite a bit of kernel code which assumes that more than one node is possible if CONFIG_NUMA is enabled. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-09-23s390/topology: avoid firing events before kobjs are createdVasily Gorbik1-1/+2
arch_update_cpu_topology is first called from: kernel_init_freeable->sched_init_smp->sched_init_domains even before cpus has been registered in: kernel_init_freeable->do_one_initcall->s390_smp_init Do not trigger kobject_uevent change events until cpu devices are actually created. Fixes the following kasan findings: BUG: KASAN: global-out-of-bounds in kobject_uevent_env+0xb40/0xee0 Read of size 8 at addr 0000000000000020 by task swapper/0/1 BUG: KASAN: global-out-of-bounds in kobject_uevent_env+0xb36/0xee0 Read of size 8 at addr 0000000000000018 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G B Hardware name: IBM 3906 M04 704 (LPAR) Call Trace: ([<0000000143c6db7e>] show_stack+0x14e/0x1a8) [<0000000145956498>] dump_stack+0x1d0/0x218 [<000000014429fb4c>] print_address_description+0x64/0x380 [<000000014429f630>] __kasan_report+0x138/0x168 [<0000000145960b96>] kobject_uevent_env+0xb36/0xee0 [<0000000143c7c47c>] arch_update_cpu_topology+0x104/0x108 [<0000000143df9e22>] sched_init_domains+0x62/0xe8 [<000000014644c94a>] sched_init_smp+0x3a/0xc0 [<0000000146433a20>] kernel_init_freeable+0x558/0x958 [<000000014599002a>] kernel_init+0x22/0x160 [<00000001459a71d4>] ret_from_fork+0x28/0x30 [<00000001459a71dc>] kernel_thread_starter+0x0/0x10 Cc: stable@vger.kernel.org Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-18proc/sysctl: add shared variables for range checkMatteo Croce1-4/+2
In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12treewide: add checks for the return value of memblock_alloc*()Mike Rapoport1-0/+6
Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-1/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: remove _virt from APIs returning virtual addressMike Rapoport1-2/+2
The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-06s390/topology: correct topology mode proc handlerVasily Gorbik1-25/+18
Reuse proc_douintvec_minmax to simplify topology mode proc handler. This also enforces correct range of 0-1 on proc writes and correctly handles numbers starting with 0 or spaces. Before: $ echo 01 > /proc/sys/s390/topology $ cat /proc/sys/s390/topology 0 $ echo ' 1' > /proc/sys/s390/topology -bash: echo: write error: Invalid argument $ echo 2 > /proc/sys/s390/topology -bash: echo: write error: Invalid argument $ echo 12 > /proc/sys/s390/topology $ cat /proc/sys/s390/topology 1 After: $ echo 01 > /proc/sys/s390/topology $ cat /proc/sys/s390/topology 1 $ echo ' 1' > /proc/sys/s390/topology $ cat /proc/sys/s390/topology 1 $ echo 2 > /proc/sys/s390/topology -bash: echo: write error: Invalid argument $ echo 12 > /proc/sys/s390/topology -bash: echo: write error: Invalid argument $ echo ' 0' > /proc/sys/s390/topology $ cat /proc/sys/s390/topology 0 Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-02s390: fix gcc 8 stringop-truncation warnings in proc handlersVasily Gorbik1-2/+1
arch/s390/kernel/topology.c:591:3: warning: 'strncpy' output truncated before terminating nul copying 2 bytes from a string of the same length [-Wstringop-truncation] strncpy(buf, topology_is_enabled() ? "1\n" : "0\n", ARRAY_SIZE(buf)); arch/s390/appldata/appldata_base.c:326:3: warning: 'strncpy' output truncated before terminating nul copying 2 bytes from a string of the same length [-Wstringop-truncation] strncpy(buf, ops->active ? "1\n" : "0\n", ARRAY_SIZE(buf)); arch/s390/appldata/appldata_base.c:217:3: warning: 'strncpy' output truncated before terminating nul copying 2 bytes from a string of the same length [-Wstringop-truncation] strncpy(buf, appldata_timer_active ? "1\n" : "0\n", ARRAY_SIZE(buf)); To avoid the warning, just reuse memcpy. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-09treewide: Use DEVICE_ATTR_RWJoe Perches1-2/+1
Convert DEVICE_ATTR uses to DEVICE_ATTR_RW where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(\s*S_IRUGO\s*\|\s*S_IWUSR|\s*S_IWUSR\s*\|\s*S_IRUGO\s*|\s*0644\s*)\)?\s*,\s*\1_show\s*,\s*\1_store\s*\)/DEVICE_ATTR_RW(\1)/g; print;}' Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24s390: kernel: add SPDX identifiers to the remaining filesGreg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the arch/s390/kernel/ files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-10-05timer: Remove users of TIMER_DEFERRED_INITIALIZERKees Cook1-3/+3
This removes uses of TIMER_DEFERRED_INITIALIZER and chooses a location to call timer_setup() from before add_timer() or mod_timer() is called. Adjusts callbacks to use from_timer() as needed. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Petr Mladek <pmladek@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: linux1394-devel@lists.sourceforge.net Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-s390@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Harish Patil <harish.patil@cavium.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Manish Chopra <manish.chopra@cavium.com> Cc: Len Brown <len.brown@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-pm@vger.kernel.org Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Mark Gross <mark.gross@intel.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Michael Reed <mdr@sgi.com> Cc: netdev@vger.kernel.org Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lkml.kernel.org/r/1507159627-127660-7-git-send-email-keescook@chromium.org
2017-09-28s390/topology: add detection of dedicated vs shared CPUsMartin Schwidefsky1-1/+42
The topology information returned by STSI 15.x.x contains a flag if the CPUs of a topology-list are dedicated or shared. Make this information available if the machine provides topology information. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-20s390/topology: enable / disable topology dynamicallyHeiko Carstens1-2/+74
Add a new sysctl file /proc/sys/s390/topology which displays if topology is on (1) or off (0) as specified by the "topology=" kernel parameter. This allows to change topology information during runtime and configuring it via /etc/sysctl.conf instead of using the kernel line parameter. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-20s390/topology: alternative topology for topology-less machinesHeiko Carstens1-11/+61
If running on machines that do not provide topology information we currently generate a "fake" topology which defines the maximum distance between each cpu: each cpu will be put into an own drawer. Historically this used to be the best option for (virtual) machines in overcommited hypervisors. For some workloads however it is better to generate a different topology where all cpus are siblings within a package (all cpus are core siblings). This shows performance improvements of up to 10%, depending on the workload. In order to keep the current behaviour, but also allow to switch to the different core sibling topology use the existing "topology=" kernel parameter: Specifying "topology=on" on machines without topology information will generate the core siblings (fake) topology information, instead of the default topology information where all cpus have the maximum distance. On machines which provide topology information specifying "topology=on" does not have any effect. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22s390/sysinfo,topology: provide raw stsi 15,1,x data via debugfsHeiko Carstens1-1/+1
Provide the raw stsi 15,1,x data contents via debugfs. This makes it much easier to debug unexpected scheduling domains on machines that provide cpu topology information. Therefore this file adds a new 's390/stsi' debugfs directory with a file for each possible topology nesting level that is allowed by the architecture. The files will be created regardless if the machine supports all, or any, level. If a level is not supported, or no data is available, user space can recognize this with a -EINVAL error code when trying to read such data. In addition a 'topology' symlink is created that points to the file that contains the data that is used to create the scheduling domains. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22s390/topology: get rid of core mask arrayHeiko Carstens1-1/+3
Use a single long value instead of a single element array to represent the core mask. The array is a leftover from 32/31 bit code so we were able to use bitops helper functions. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/topology.h> We are going to split <linux/sched/topology.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/topology.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07s390/topology: correct allocation of topology informationMartin Schwidefsky1-1/+1
The data stored by the STSI instruction can be up to a page in size but the memblock_virt_alloc allocation for tl_info only specifies 16 bytes. The memory after the short allocation is overwritten every time arch_update_cpu_topology is called. Fixes: 8c9105802235 "s390/numa: establish cpu to node mapping early" Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390/topology: make "topology=off" parameter workHeiko Carstens1-9/+2
The "topology=off" kernel parameter is supposed to prevent the kernel to use hardware topology information to generate scheduling domains etc. For an unknown reason I implemented this in a very odd way back then: instead of simply clearing the MACHINE_HAS_TOPOLOGY flag within the lowcore I added a second variable which indicated that topology information should not be used. This is more than suboptimal since it partially doesn't work. For the fake NUMA case topology information is still considered and scheduling domains will be created based on this. To fix this and to simplify the code get rid of the extra variable and implement the "topology=off" case like it is done for other features. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390/topology: reduce number of printksHeiko Carstens1-5/+3
Merge the seven printks within topology_init_early to a single one. With an early boot console this avoids printing six lines each containing only a single character. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-12-07s390/numa: establish cpu to node mapping earlyHeiko Carstens1-9/+24
Initialize the cpu topology and therefore also the cpu to node mapping much earlier. Fixes this warning and subsequent crashes when using the fake numa emulation mode on s390: WARNING: CPU: 0 PID: 1 at include/linux/cpumask.h:121 select_task_rq+0xe6/0x1a8 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc6-00001-ge9d867a67fd0-dirty #28 task: 00000001dd270008 ti: 00000001eccb4000 task.ti: 00000001eccb4000 Krnl PSW : 0404c00180000000 0000000000176c56 (select_task_rq+0xe6/0x1a8) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Call Trace: ([<0000000000176c30>] select_task_rq+0xc0/0x1a8) ([<0000000000177d64>] try_to_wake_up+0x2e4/0x478) ([<000000000015d46c>] create_worker+0x174/0x1c0) ([<0000000000161a98>] alloc_unbound_pwq+0x360/0x438) ([<0000000000162550>] apply_wqattrs_prepare+0x200/0x2a0) ([<000000000016266a>] apply_workqueue_attrs_locked+0x7a/0xb0) ([<0000000000162af0>] apply_workqueue_attrs+0x50/0x78) ([<000000000016441c>] __alloc_workqueue_key+0x304/0x520) ([<0000000000ee3706>] default_bdi_init+0x3e/0x70) ([<0000000000100270>] do_one_initcall+0x140/0x1d8) ([<0000000000ec9da8>] kernel_init_freeable+0x220/0x2d8) ([<0000000000984a7a>] kernel_init+0x2a/0x150) ([<00000000009913fa>] kernel_thread_starter+0x6/0xc) ([<00000000009913f4>] kernel_thread_starter+0x0/0xc) Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-12-07s390/topology: use cpu_topology array instead of per cpu variableHeiko Carstens1-9/+9
CPU topology information like cpu to node mapping must be setup in setup_arch already. Topology information is currently made available with a per cpu variable; this however will not work when the initialization will be moved to setup_arch, since the generic percpu setup will be done much later. Therefore convert back to a cpu_topology array. Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-12-07s390/topology: always use s390 specific sched_domain_topology_levelHeiko Carstens1-1/+1
The s390 specific sched_domain_topology_level should always be used, not only if the machine provides topology information. Luckily this odd behaviour, that was by accident introduced with git commit d05d15da18f5 ("s390/topology: delay initialization of topology cpu masks") has currently no side effect. Fixes: d05d15da18f5 ("s390/topology: delay initialization of topology cpumasks") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/topology: remove z10 special handlingHeiko Carstens1-56/+8
I don't have a z10 to test this anymore, so I have no idea if the code works at all or even crashes. I can try to emulate, but it is just guess work. Nor do we know if the z10 special handling is performance wise still better than the generic handling. There have been a lot of changes to the scheduler. Therefore let's play safe and remove the special handling. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/topology: add drawer scheduling domain levelHeiko Carstens1-6/+27
The z13 machine added a fourth level to the cpu topology information. The new top level is called drawer. A drawer contains two books, which used to be the top level. Adding this additional scheduling domain did show performance improvements for some workloads of up to 8%, while there don't seem to be any workloads impacted in a negative way. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Powered by cgit, Gruvboxed by Blaster4385.