aboutsummaryrefslogtreecommitdiff
path: root/arch/openrisc/kernel
AgeCommit message (Collapse)AuthorFilesLines
2024-07-10openrisc: convert to generic syscall tableArnd Bergmann2-2/+10
The uapi/asm/unistd_32.h and asm/syscall_table_32.h headers can now be generated from scripts/syscall.tbl, which makes this consistent with the other architectures that have their own syscall.tbl. openrisc has one extra system call that gets added to scripts/syscall.tbl. The time32, stat64, rlimit and renameat entries in the syscall_abis_32 line are for system calls that were part of the generic ABI when arch/nios2 got added but are no longer enabled by default for new architectures. Both the user visible side of asm/unistd.h and the internal syscall table in the kernel should have the same effective contents after this. When asm/syscalls.h is included in kernel/fork.c for the purpose of type checking, the redirection macros cause problems. Move these so only the references get redirected. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-04-15openrisc: Move FPU state out of pt_regsStafford Horne5-30/+52
My original, naive, FPU support patch had the FPCSR register stored during both the *mode switch* and *context switch*. This is wasteful. Also, the original patches did not save the FPU state when handling signals during the system call fast path. We fix this by moving the FPCSR state to thread_struct in task_struct. We also introduce new helper functions save_fpu and restore_fpu which can be used to sync the FPU with thread_struct. These functions are now called when needed: - Setting up and restoring sigcontext when handling signals - Before and after __switch_to during context switches - When handling FPU exceptions - When reading and writing FPU register sets In the future we can further optimize this by doing lazy FPU save and restore. For example, FPU sync is not needed when switching to and from kernel threads (x86 does this). FPU save and restore does not need to be done two times if we have both rescheduling and signal work to do. However, since OpenRISC FPU state is a single register, I leave these optimizations for future consideration. Signed-off-by: Stafford Horne <shorne@gmail.com>
2024-04-15openrisc: Add FPU configStafford Horne2-1/+8
Allow disabling FPU related code sequences to save space. Signed-off-by: Stafford Horne <shorne@gmail.com>
2024-04-15openrisc: traps: Don't send signals to kernel mode threadsStafford Horne1-19/+29
OpenRISC exception handling sends signals to user processes on floating point exceptions and trap instructions (for debugging) among others. There is a bug where the trap handling logic may send signals to kernel threads, we should not send these signals to kernel threads, if that happens we treat it as an error. This patch adds conditions to die if the kernel receives these exceptions in kernel mode code. Fixes: 27267655c531 ("openrisc: Support floating point user api") Signed-off-by: Stafford Horne <shorne@gmail.com>
2024-04-15openrisc: traps: Remove calls to show_registers before dieStafford Horne1-3/+0
The die function calls show_registers unconditionally. Remove calls to show_registers before calling die to avoid printing all registers and stack status two times during a crash. This was found when testing kernel trap and floating point exception handling. Signed-off-by: Stafford Horne <shorne@gmail.com>
2024-04-15openrisc: traps: Convert printks to pr_<level> macrosStafford Horne1-44/+44
The pr_* macros are the convention and my upcoming patches add even more printk's. Use this opportunity to convert the printks in this file to the pr_* macros to avoid patch check warnings. Signed-off-by: Stafford Horne <shorne@gmail.com>
2024-04-15openrisc: Add support for more module relocationsStafford Horne1-0/+10
When testing modules in OpenRISC I found R_OR1K_AHI16 (signed adjusted high 16-bit) and R_OR1K_SLO16 (split low 16-bit) relocations are used in modules but not implemented yet. This patch implements the relocations. I have tested with a few modules. Signed-off-by: Stafford Horne <shorne@gmail.com>
2024-04-15openrisc: Define openrisc relocation typesStafford Horne1-4/+4
This defines the current OpenRISC relocation types using the current R_OR1K_* naming conventions. The old R_OR32_* definitions are left for backwards compatibility. Note, the R_OR32_VTENTRY and R_OR32_VTINHERIT macros were defined with the wrong values the have always been 7 and 8 respectively, not 8 and 7. They are not used for module loading and I have updated them to use the correct values. Signed-off-by: Stafford Horne <shorne@gmail.com>
2024-04-15openrisc: Use do_kernel_power_off()Stafford Horne1-5/+3
After commit 14c5678720bd ("power: reset: syscon-poweroff: Use devm_register_sys_off_handler(POWER_OFF)") setting up of pm_power_off was removed from the driver, this causes OpenRISC platforms using syscon-poweroff to no longer shutdown. The kernel now supports chained power-off handlers. Use do_kernel_power_off() that invokes chained power-off handlers. All architectures have moved away from using pm_power_off except OpenRISC. This patch migrates openrisc to use do_kernel_power_off() instead of the legacy pm_power_off(). Fixes: 14c5678720bd ("power: reset: syscon-poweroff: Use devm_register_sys_off_handler(POWER_OFF)") Signed-off-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2024-03-14Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds1-3/+3
Pull OpenRISC updates from Stafford Horne: "Just a few cleanups and updates that were sent in: - Replace asm/fixmap.h with asm-generic version - Fix to move memblock setup up before it's used during init" * tag 'for-linus' of https://github.com/openrisc/linux: openrisc: Use asm-generic's version of fix_to_virt() & virt_to_fix() openrisc: Call setup_memory() earlier in the init sequence
2024-03-10openrisc: Call setup_memory() earlier in the init sequenceOreoluwa Babatunde1-3/+3
The unflatten_and_copy_device_tree() function contains a call to memblock_alloc(). This means that memblock is allocating memory before any of the reserved memory regions are set aside in the setup_memory() function which calls early_init_fdt_scan_reserved_mem(). Therefore, there is a possibility for memblock to allocate from any of the reserved memory regions. Hence, move the call to setup_memory() to be earlier in the init sequence so that the reserved memory regions are set aside before any allocations are done using memblock. Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2024-03-04smp: Consolidate smp_prepare_boot_cpu()Thomas Gleixner1-4/+0
There is no point in having seven architectures implementing the same empty stub. Provide a weak function in the init code and remove the stubs. This also allows to utilize the function on UP which is required to sanitize the per CPU handling on X86 UP. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20240304005104.567671691@linutronix.de
2023-08-21openriac: Remove unused nommu_dump_state functionStafford Horne1-75/+0
When compiling with W=1 enabling -Wmissing-prototypes the compiler warns: arch/openrisc/kernel/traps.c:146:6: error: no previous prototype for 'nommu_dump_state' [-Werror=missing-prototypes] This function is not used so remove it. Reported-by: Arnd Bergmann <arnd@arndb.de> Closes: https://lore.kernel.org/linux-kernel/20230810141947.1236730-17-arnd@kernel.org/ Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-08-21openrisc: Include cpu.h and switch_to.h for prototypesStafford Horne1-0/+2
When compiling with W=1 enabling -Wmissing-prototypes the compiler warns: arch/openrisc/kernel/process.c:100:6: error: no previous prototype for 'arch_cpu_idle' [-Werror=missing-prototypes] arch/openrisc/kernel/process.c:240:21: error: no previous prototype for '__switch_to' [-Werror=missing-prototypes] Fix these by adding the approrpiate header files to process.c which brings in the prototype definitions. Reported-by: Arnd Bergmann <arnd@arndb.de> Closes: https://lore.kernel.org/linux-kernel/20230810141947.1236730-17-arnd@kernel.org/ Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-08-21openrisc: Add prototype for die to bug.hStafford Horne1-0/+1
When compiling with W=1 enabling -Wmissing-prototypes the compiler warns: arch/openrisc/kernel/traps.c:221:17: sing-prototypesrror: no previous prototype for 'die' [-Werror=missing-prototypes] Fix by adding the prototype to the appropriate header file and including the header file in the appropriate C files. Reported-by: Arnd Bergmann <arnd@arndb.de> Closes: https://lore.kernel.org/linux-kernel/20230810141947.1236730-17-arnd@kernel.org/ Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-08-21openrisc: Add prototype for show_registers to processor.hStafford Horne2-2/+1
When compiling with W=1 enabling -Wmissing-prototypes the compiler warns: arch/openrisc/kernel/traps.c:67:6: error: no previous prototype for 'show_registers' [-Werror=missing-prototypes] Fix by adding the prototype to the appropriate header file and including the header file in the appropriate C files. Reported-by: Arnd Bergmann <arnd@arndb.de> Closes: https://lore.kernel.org/linux-kernel/20230810141947.1236730-17-arnd@kernel.org/ Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-08-21openrisc: Declare do_signal function as staticStafford Horne1-1/+1
When compiling with W=1 enabling -Wmissing-prototypes the compiler warns: arch/openrisc/kernel/signal.c:227:5: error: no previous prototype for 'do_signal' [-Werror=missing-prototypes] Fix this by declaring the function a static as it is not used outside of the scope of this file. Reported-by: Arnd Bergmann <arnd@arndb.de> Closes: https://lore.kernel.org/linux-kernel/20230810141947.1236730-17-arnd@kernel.org/ Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-08-21openrisc: Add missing prototypes for assembly called fnctionsStafford Horne5-0/+21
These functions are all called from assembly files so there is no need for a prototype in a header file, but when compiling with W=1 enabling -Wmissing-prototypes the compiler warns: arch/openrisc/kernel/ptrace.c:191:17: error: no previous prototype for 'do_syscall_trace_enter' [-Werror=missing-prototypes] arch/openrisc/kernel/ptrace.c:210:17: error: no previous prototype for 'do_syscall_trace_leave' [-Werror=missing-prototypes] arch/openrisc/kernel/signal.c:293:1: error: no previous prototype for 'do_work_pending' [-Werror=missing-prototypes] arch/openrisc/kernel/signal.c:68:17: error: no previous prototype for '_sys_rt_sigreturn' [-Werror=missing-prototypes] arch/openrisc/kernel/time.c:111:25: error: no previous prototype for 'timer_interrupt' [-Werror=missing-prototypes] arch/openrisc/kernel/traps.c:239:17: error: no previous prototype for 'unhandled_exception' [-Werror=missing-prototypes] arch/openrisc/kernel/traps.c:246:17: error: no previous prototype for 'do_fpe_trap' [-Werror=missing-prototypes] arch/openrisc/kernel/traps.c:268:17: error: no previous prototype for 'do_trap' [-Werror=missing-prototypes] arch/openrisc/kernel/traps.c:273:17: error: no previous prototype for 'do_unaligned_access' [-Werror=missing-prototypes] arch/openrisc/kernel/traps.c:286:17: error: no previous prototype for 'do_bus_fault' [-Werror=missing-prototypes] arch/openrisc/kernel/traps.c:462:17: error: no previous prototype for 'do_illegal_instruction' [-Werror=missing-prototypes] arch/openrisc/mm/fault.c:44:17: error: no previous prototype for 'do_page_fault' [-Werror=missing-prototypes] Since these are not needed in header files, fix these by adding prototypes to the top of the respective C files. Reported-by: Arnd Bergmann <arnd@arndb.de> Closes: https://lore.kernel.org/linux-kernel/20230810141947.1236730-17-arnd@kernel.org/ Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-07-10openrisc: Union fpcsr and oldmask in sigcontext to unbreak userspace ABIStafford Horne1-2/+2
With commit 27267655c531 ("openrisc: Support floating point user api") I added an entry to the struct sigcontext which caused an unwanted change to the userspace ABI. To fix this we use the previously unused oldmask field space for the floating point fpcsr state. We do this with a union to restore the ABI back to the pre kernel v6.4 ABI and keep API compatibility. This does mean if there is some code somewhere that is setting oldmask in an OpenRISC specific userspace sighandler it would end up setting the floating point register status, but I think it's unlikely as oldmask was never functional before. Fixes: 27267655c531 ("openrisc: Support floating point user api") Reported-by: Szabolcs Nagy <nsz@port70.net> Closes: https://lore.kernel.org/openrisc/20230626213840.GA1236108@port70.net/ Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-05-01Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds6-27/+93
Pull OpenRISC updates from Stafford Horne: "Two things for OpenRISC this cycle: - Small cleanup for device tree cpu iteration from Rob Herring - Add support for storing, restoring and accessing user space FPU state, to allow for libc to support the FPU on OpenRISC" * tag 'for-linus' of https://github.com/openrisc/linux: openrisc: Add floating point regset openrisc: Support floating point user api openrisc: Support storing and restoring fpu state openrisc: Properly store r31 to pt_regs on unhandled exceptions openrisc: Use common of_get_cpu_node() instead of open-coding
2023-04-26openrisc: Add floating point regsetStafford Horne1-0/+37
Define REGSET_FPU to allow reading and writing the FPCSR fpu state register. This will be used primarily by debuggers like GDB. Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-04-26openrisc: Support floating point user apiStafford Horne4-4/+35
Add support for handling floating point exceptions and forwarding the SIGFPE signal to processes. Also, add fpu state to sigcontext. Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-04-26openrisc: Support storing and restoring fpu stateStafford Horne2-2/+17
OpenRISC floating point state is not so expensive to save as OpenRISC uses general purpose registers for floating point instructions. We need to save only the floating point status and control register, FPCSR. Add support to maintain the FPCSR unconditionally upon exceptions and switches. On machines that do not support FPU this will always just store 0x0 and restore is a no-op. On FPU systems this adds an additional special purpose register read/write and read/write to memory (already cached). Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-04-26openrisc: Properly store r31 to pt_regs on unhandled exceptionsStafford Horne1-4/+2
In commit 91993c8c2ed5 ("openrisc: use shadow registers to save regs on exception") the unhandled exception path was changed to do an early store of r30 instead of r31. The entry code was not updated and r31 is not getting stored to pt_regs. This patch updates the entry handler to store r31 instead of r30. We also remove some misleading commented out store r30 and r31 instructrions. I noticed this while working on adding floating point exception handling, This issue probably would never impact anything since we kill the process or Oops right away on unhandled exceptions. Fixes: 91993c8c2ed5 ("openrisc: use shadow registers to save regs on exception") Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-04-01openrisc: Use common of_get_cpu_node() instead of open-codingRob Herring1-17/+2
The common of_get_cpu_node() is equivalent to setup_find_cpu_node(), so use it instead. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2023-03-24treewide: Trace IPIs sent via smp_send_reschedule()Valentin Schneider1-1/+1
To be able to trace invocations of smp_send_reschedule(), rename the arch-specific definitions of it to arch_smp_send_reschedule() and wrap it into an smp_send_reschedule() that contains a tracepoint. Changes to include the declaration of the tracepoint were driven by the following coccinelle script: @func_use@ @@ smp_send_reschedule(...); @include@ @@ #include <trace/events/ipi.h> @no_include depends on func_use && !include@ @@ #include <...> + + #include <trace/events/ipi.h> [csky bits] [riscv bits] Signed-off-by: Valentin Schneider <vschneid@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230307143558.294354-6-vschneid@redhat.com
2023-01-13arch/idle: Change arch_cpu_idle() behavior: always exit with IRQs disabledPeter Zijlstra1-0/+1
Current arch_cpu_idle() is called with IRQs disabled, but will return with IRQs enabled. However, the very first thing the generic code does after calling arch_cpu_idle() is raw_local_irq_disable(). This means that architectures that can idle with IRQs disabled end up doing a pointless 'enable-disable' dance. Therefore, push this IRQ disabling into the idle function, meaning that those architectures can avoid the pointless IRQ state flipping. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195540.618076436@infradead.org
2023-01-13objtool/idle: Validate __cpuidle code as noinstrPeter Zijlstra1-1/+0
Idle code is very like entry code in that RCU isn't available. As such, add a little validation. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195540.373461409@infradead.org
2022-11-15openrisc: ptrace: user_regset_copyin_ignore() always returns 0Sergey Shtylyov1-5/+3
user_regset_copyin_ignore() always returns 0, so checking its result seems pointless -- don't do this anymore... Link: https://lkml.kernel.org/r/20221014212235.10770-9-s.shtylyov@omp.ru Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Cc: Brian Cain <bcain@quicinc.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-15Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds1-8/+8
Pull OpenRISC updates from Stafford Horne: "I have relocated to London so not much work from me while I get settled. Still, OpenRISC picked up two patches in this window: - Fix for kernel page table walking from Jann Horn - MAINTAINER entry cleanup from Palmer Dabbelt" * tag 'for-linus' of https://github.com/openrisc/linux: MAINTAINERS: git://github -> https://github.com for openrisc openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncached
2022-10-12Merge tag 'mm-nonmm-stable-2022-10-11' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - hfs and hfsplus kmap API modernization (Fabio Francesco) - make crash-kexec work properly when invoked from an NMI-time panic (Valentin Schneider) - ntfs bugfixes (Hawkins Jiawei) - improve IPC msg scalability by replacing atomic_t's with percpu counters (Jiebin Sun) - nilfs2 cleanups (Minghao Chi) - lots of other single patches all over the tree! * tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits) include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype proc: test how it holds up with mapping'less process mailmap: update Frank Rowand email address ia64: mca: use strscpy() is more robust and safer init/Kconfig: fix unmet direct dependencies ia64: update config files nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure fork: remove duplicate included header files init/main.c: remove unnecessary (void*) conversions proc: mark more files as permanent nilfs2: remove the unneeded result variable nilfs2: delete unnecessary checks before brelse() checkpatch: warn for non-standard fixes tag style usr/gen_init_cpio.c: remove unnecessary -1 values from int file ipc/msg: mitigate the lock contention with percpu counter percpu: add percpu_counter_add_local and percpu_counter_sub_local fs/ocfs2: fix repeated words in comments relay: use kvcalloc to alloc page array in relay_alloc_page_array proc: make config PROC_CHILDREN depend on PROC_FS fs: uninline inode_maybe_inc_iversion() ...
2022-10-08openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncachedJann Horn1-8/+8
Since commit 8782fb61cc848 ("mm: pagewalk: Fix race between unmap and page walker"), walk_page_range() on kernel ranges won't work anymore, walk_page_range_novma() must be used instead. Note: I don't have an openrisc development setup, so this is completely untested. Fixes: 8782fb61cc848 ("mm: pagewalk: Fix race between unmap and page walker") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-10-02kbuild: use obj-y instead extra-y for objects placed at the headMasahiro Yamada1-2/+2
The objects placed at the head of vmlinux need special treatments: - arch/$(SRCARCH)/Makefile adds them to head-y in order to place them before other archives in the linker command line. - arch/$(SRCARCH)/kernel/Makefile adds them to extra-y instead of obj-y to avoid them going into built-in.a. This commit gets rid of the latter. Create vmlinux.a to collect all the objects that are unconditionally linked to vmlinux. The objects listed in head-y are moved to the head of vmlinux.a by using 'ar m'. With this, arch/$(SRCARCH)/kernel/Makefile can consistently use obj-y for builtin objects. There is no *.o that is directly linked to vmlinux. Drop unneeded code in scripts/clang-tools/gen_compile_commands.py. $(AR) mPi needs 'T' to workaround the llvm-ar bug. The fix was suggested by Nathan Chancellor [1]. [1]: https://lore.kernel.org/llvm/YyjjT5gQ2hGMH0ni@dev-arch.thelio-3990X/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-09-11kernel: exit: cleanup release_thread()Kefeng Wang1-4/+0
Only x86 has own release_thread(), introduce a new weak release_thread() function to clean empty definitions in other ARCHs. Link: https://lkml.kernel.org/r/20220819014406.32266-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Guo Ren <guoren@kernel.org> [csky] Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Brian Cain <bcain@quicinc.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Stafford Horne <shorne@gmail.com> [openrisc] Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Huacai Chen <chenhuacai@kernel.org> [LoongArch] Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> [csky] Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jonas Bonn <jonas@southpole.se> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Xuerui Wang <kernel@xen0n.name> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-07Merge tag 'mm-nonmm-stable-2022-08-06-2' of ↵Linus Torvalds1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "Updates to various subsystems which I help look after. lib, ocfs2, fatfs, autofs, squashfs, procfs, etc. A relatively small amount of material this time" * tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) scripts/gdb: ensure the absolute path is generated on initial source MAINTAINERS: kunit: add David Gow as a maintainer of KUnit mailmap: add linux.dev alias for Brendan Higgins mailmap: update Kirill's email profile: setup_profiling_timer() is moslty not implemented ocfs2: fix a typo in a comment ocfs2: use the bitmap API to simplify code ocfs2: remove some useless functions lib/mpi: fix typo 'the the' in comment proc: add some (hopefully) insightful comments bdi: remove enum wb_congested_state kernel/hung_task: fix address space of proc_dohung_task_timeout_secs lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t() squashfs: support reading fragments in readahead call squashfs: implement readahead squashfs: always build "file direct" version of page actor Revert "squashfs: provide backing_dev_info in order to disable read-ahead" fs/ocfs2: Fix spelling typo in comment ia64: old_rr4 added under CONFIG_HUGETLB_PAGE proc: fix test for "vsyscall=xonly" boot option ...
2022-07-29profile: setup_profiling_timer() is moslty not implementedBen Dooks1-6/+0
The setup_profiling_timer() is mostly un-implemented by many architectures. In many places it isn't guarded by CONFIG_PROFILE which is needed for it to be used. Make it a weak symbol in kernel/profile.c and remove the 'return -EINVAL' implementations from the kenrel. There are a couple of architectures which do return 0 from the setup_profiling_timer() function but they don't seem to do anything else with it. To keep the /proc compatibility for now, leave these for a future update or removal. On ARM, this fixes the following sparse warning: arch/arm/kernel/smp.c:793:5: warning: symbol 'setup_profiling_timer' was not declared. Should it be static? Link: https://lkml.kernel.org/r/20220721195509.418205-1-ben-linux@fluff.org Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-28openrisc: unwinder: Fix grammar issue in commentXiang wangx1-1/+1
Delete the redundant word 'the'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-06-03Merge tag 'kthread-cleanups-for-v5.19' of ↵Linus Torvalds1-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull kthread updates from Eric Biederman: "This updates init and user mode helper tasks to be ordinary user mode tasks. Commit 40966e316f86 ("kthread: Ensure struct kthread is present for all kthreads") caused init and the user mode helper threads that call kernel_execve to have struct kthread allocated for them. This struct kthread going away during execve in turned made a use after free of struct kthread possible. Here, commit 343f4c49f243 ("kthread: Don't allocate kthread_struct for init and umh") is enough to fix the use after free and is simple enough to be backportable. The rest of the changes pass struct kernel_clone_args to clean things up and cause the code to make sense. In making init and the user mode helpers tasks purely user mode tasks I ran into two complications. The function task_tick_numa was detecting tasks without an mm by testing for the presence of PF_KTHREAD. The initramfs code in populate_initrd_image was using flush_delayed_fput to ensuere the closing of all it's file descriptors was complete, and flush_delayed_fput does not work in a userspace thread. I have looked and looked and more complications and in my code review I have not found any, and neither has anyone else with the code sitting in linux-next" * tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: sched: Update task_tick_numa to ignore tasks without an mm fork: Stop allowing kthreads to call execve fork: Explicitly set PF_KTHREAD init: Deal with the init process being a user mode process fork: Generalize PF_IO_WORKER handling fork: Explicity test for idle tasks in copy_thread fork: Pass struct kernel_clone_args into copy_thread kthread: Don't allocate kthread_struct for init and umh
2022-05-26Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds5-306/+167
Pull OpenRISC updates from Stafford Horne: - A few sparse warning fixups and other cleanups I noticed when working on a recent TLB bug found on a new OpenRISC core bring up. - A few fixup's from me and Jason A Donenfeld to help shutdown OpenRISC platforms when running CI tests * tag 'for-linus' of https://github.com/openrisc/linux: openrisc: Allow power off handler overriding openrisc: Remove unused IMMU tlb workardound openrisc/fault: Fix symbol scope warnings openrisc/delay: Add include to fix symbol not declared warning openrisc/time: Fix symbol scope warnings openrisc/traps: Declare unhandled_exception for asmlinkage openrisc/traps: Remove die_if_kernel function openrisc/traps: Declare file scope symbols as static openrisc: Update litex defconfig to support glibc userland openrisc: Pretty print show_registers memory dumps openrisc: Add syscall details to emergency syscall debugging openrisc: Add support for liteuart emergency printing openrisc: Cleanup emergency print handling openrisc: Add gcc machine instruction flag configuration openrisc: define nop command for simulator reboot openrisc: remove bogus nops and shutdowns openrisc: fix typos in comments
2022-05-23openrisc: Allow power off handler overridingStafford Horne1-2/+15
The OpenRISC platform always defines a default pm_power_off hanlder which is only useful for simulators. Having this set also means power management drivers like syscon-power are not able to wire in their own pm_power_off handlers. Fix this by not setting the pm_power_off handler by default and fallback to the simulator power off handler if no handler is set. This has been tested with a new OpenRISC virt platform I am working on for QEMU. https://github.com/stffrdhrn/qemu/commits/or1k-virt Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc: Remove unused IMMU tlb workardoundStafford Horne1-209/+0
This looks to be some historical code that was used to convert TLB misses on branches from l.bf, l.jal, l.j etc all to a trampoline using l.jr (jump register). I don't see this being used and I don't know the history of it so remove it. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc/time: Fix symbol scope warningsStafford Horne1-1/+2
Spare reported the following warnings: arch/openrisc/kernel/time.c:64:1: warning: symbol 'clockevent_openrisc_timer' was not declared. Should it be static? arch/openrisc/kernel/time.c:66:6: warning: symbol 'openrisc_clockevent_init' was not declared. Should it be static? This patch fixes by: - Add static declaration to clockevent_openrisc_timer as it's used only in this file. - Add include for asm/time.h for openrisc_clockevent_init declaration. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc/traps: Declare unhandled_exception for asmlinkageStafford Horne1-1/+1
Noticed this when workin on warnings. As unhandled_exception is used in entry.S we should attribute it with asmlinkage. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc/traps: Remove die_if_kernel functionStafford Horne1-9/+0
This was noticed when I saw this warning: arch/openrisc/kernel/traps.c:234:6: warning: no previous prototype for 'die_if_kernel' [-Wmissing-prototypes] 234 | void die_if_kernel(const char *str, struct pt_regs *regs, long err) | ^~~~~~~~~~~~~ The die_if_kernel function is not used in the OpenRISC port so remove it. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc/traps: Declare file scope symbols as staticStafford Horne1-3/+3
Sparse was reporting the following warnings: arch/openrisc/kernel/traps.c:37:5: warning: symbol 'kstack_depth_to_print' was not declared. Should it be static? arch/openrisc/kernel/traps.c:39:22: warning: symbol 'lwa_addr' was not declared. Should it be static? arch/openrisc/kernel/traps.c:41:6: warning: symbol 'print_trace' was not declared. Should it be static? The function print_trace and local variables kstack_depth_to_print and lwa_addr are not used outside of this file. This patch marks them as static. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc: Pretty print show_registers memory dumpsStafford Horne1-13/+33
Currently show registers, print memory dumps character by character and there is no address information, so its a bit difficult to use. For example before a stack dump looks as follows. [ 13.650000] Stack: [ 13.650000] Call trace [ 13.690000] [<(ptrval)>] ? put_timespec64+0x44/0x60 [ 13.690000] [<(ptrval)>] ? _data_page_fault_handler+0x104/0x10c [ 13.700000] [ 13.700000] Code: [ 13.700000] 13 [ 13.700000] ff [ 13.700000] ff [ 13.700000] f9 [ 13.710000] 84 [ 13.710000] 82 [ 13.710000] ff [ 13.710000] bc [ 13.710000] 07 [ 13.710000] fd [ 13.720000] 4e [ 13.720000] 67 [ 13.720000] 84 [ 13.720000] 62 [ 13.720000] ff ... This change updates this to print the address and data a word at time. [ 0.830000] Stack: [ 0.830000] Call trace: [ 0.830000] [<(ptrval)>] load_elf_binary+0x744/0xf5c [ 0.830000] [<(ptrval)>] ? __kernel_read+0x144/0x184 [ 0.830000] [<(ptrval)>] bprm_execve+0x27c/0x3e4 [ 0.830000] [<(ptrval)>] kernel_execve+0x16c/0x1a0 [ 0.830000] [<(ptrval)>] run_init_process+0xa0/0xec [ 0.830000] [<(ptrval)>] ? kernel_init+0x0/0x14c [ 0.830000] [<(ptrval)>] kernel_init+0x7c/0x14c [ 0.830000] [<(ptrval)>] ? calculate_sigpending+0x30/0x40 [ 0.830000] [<(ptrval)>] ret_from_fork+0x1c/0x84 [ 0.830000] [ 0.830000] c1033dbc: c1033dec [ 0.830000] c1033dc0: c015258c [ 0.830000] c1033dc4: c129da00 [ 0.830000] c1033dc8: 00000002 [ 0.830000] c1033dcc: 00000000 [ 0.830000] c1033dd0: c129da00 [ 0.830000] c1033dd4: 00000000 [ 0.830000] c1033dd8: 00000000 [ 0.830000] (c1033ddc:) 00001e04 [ 0.830000] c1033de0: 001501fc [ 0.830000] c1033de4: c1033e68 [ 0.830000] c1033de8: c0152e60 [ 0.830000] c1033dec: c129da5c [ 0.830000] c1033df0: c0674a20 [ 0.830000] c1033df4: c1033e50 [ 0.830000] c1033df8: c00e3d6c [ 0.830000] c1033dfc: c129da5c [ 0.830000] c1033e00: 00000003 [ 0.830000] c1033e04: 00150000 [ 0.830000] c1033e08: 00002034 [ 0.830000] c1033e0c: 001501fc [ 0.830000] c1033e10: 00000000 [ 0.830000] c1033e14: 00150000 [ 0.830000] c1033e18: 0014ebbc [ 0.830000] c1033e1c: 00002000 [ 0.830000] c1033e20: 00000003 [ 0.830000] c1033e24: c12a07e0 [ 0.830000] c1033e28: 00000000 [ 0.830000] c1033e2c: 00000000 [ 0.830000] c1033e30: 00000000 [ 0.830000] c1033e34: 40040000 [ 0.830000] c1033e38: 00000000 [ 0.830000] [ 0.830000] Code: [ 0.830000] c00047a4: 9c21fff8 [ 0.830000] c00047a8: d4012000 [ 0.830000] c00047ac: d4011804 [ 0.830000] c00047b0: e4040000 [ 0.830000] c00047b4: 10000005 [ 0.830000] c00047b8: 9c84ffff [ 0.830000] (c00047bc:) d8030000 [ 0.830000] c00047c0: 03fffffc [ 0.830000] c00047c4: 9c630001 [ 0.830000] c00047c8: 9d640001 [ 0.830000] c00047cc: 84810000 [ 0.830000] c00047d0: 84610004 Now we are also printing a bit of the stack as well as the code. The stack is output to help with debugging. There may be concern about exposing sensitive information on the stack, but we are already dumping all register content which would have similar sensitive information. So I am going ahead as this proves useful in investigation. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc: Add syscall details to emergency syscall debuggingStafford Horne1-5/+15
When bringing linux on the or1k Marocchino we ran into issues starting init. This patch adds the syscall number and return address to assist tracing syscalls even before strace is able to be used. By default this is all disabled but a developer could adjust the ifdef to enable debugging. Cc: Andrey Bacherov <bandvig@mail.ru> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc: Add support for liteuart emergency printingStafford Horne1-1/+12
This patch adds support for sending emergency print output, such as unhandled exception details, to a liteuart serial device. This is the default device available on litex platforms. If a developer want to use this they should update UART_BASE_ADD to the address of liteuart. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc: Cleanup emergency print handlingStafford Horne1-63/+85
The emergency print support only works for 8250 compatible serial ports. Now that OpenRISC platforms may be configured with different serial port hardware we don't want emergency print to try to print to non-existent hardware which will cause lockups. This patch contains several fixes to get emergency print working again: - Update symbol loading to not assume the location of symbols - Split the putc print operation out to its own function to allow for different future implementations. - Update _emergency_print_nr and _emergency_print to use the putc function. - Guard serial 8250 specific sequences by CONFIG_SERIAL_8250 - Update string line feed from lf,cr to cr,lf. Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-23openrisc: define nop command for simulator rebootJason A. Donenfeld1-0/+2
The simulator defines `l.nop 1` for shutdown, but doesn't have anything for reboot. Use 13 for this, which is currently unused, dubbed `NOP_REBOOT`. Cc: Stafford Horne <shorne@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Link: https://lore.kernel.org/all/YmnaDUpVI5ihgvg6@zx2c4.com/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
Powered by cgit, Gruvboxed by Blaster4385.