| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Now Kbuild provides reasonable defaults for objtool, sanitizers, and
profilers.
Remove redundant variables.
Note:
This commit changes the coverage for some objects:
- include arch/mips/vdso/vdso-image.o into UBSAN, GCOV, KCOV
- include arch/sparc/vdso/vdso-image-*.o into UBSAN
- include arch/sparc/vdso/vma.o into UBSAN
- include arch/x86/entry/vdso/extable.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso-image-*.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso32-setup.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vma.o into GCOV, KCOV
- include arch/x86/um/vdso/vma.o into KASAN, GCOV, KCOV
I believe these are positive effects because all of them are kernel
space objects.
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Tested-by: Roberto Sassu <[email protected]>
|
|
Replaces KASAN_SANITIZE with KCSAN_SANITIZE in
boot/compressed/Makefile.
Fixes: e0a8b93efa23 mips: Enable KCSAN
Signed-off-by: Nemanja Rakovic <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
This patch enables KCSAN for the 64-bit version. Updated rules
for the incompatible compilation units (vdso, boot/compressed).
Signed-off-by: Nemanja Rakovic <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: add cmd_file_size
arch: decompressor: remove useless vmlinux.bin.all-y
kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
kbuild: drop $(size_append) from cmd_zstd
sh: rename suffix-y to suffix_y
doc: kbuild: fix default in `imply` table
microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
certs: move scripts/extract-cert to certs/
kbuild: do not quote string values in include/config/auto.conf
kbuild: do not include include/config/auto.conf from shell scripts
certs: simplify $(srctree)/ handling and remove config_filename macro
kbuild: stop using config_filename in scripts/Makefile.modsign
certs: remove misleading comments about GCC PR
certs: refactor file cleaning
certs: remove unneeded -I$(srctree) option for system_certificates.o
certs: unify duplicated cmd_extract_certs and improve the log
certs: use $< and $@ to simplify the key generation rule
kbuild: remove headers_check stub
kbuild: move headers_check.pl to usr/include/
certs: use if_changed to re-generate the key when the key type is changed
...
|
|
GZIP-compressed files end with 4 byte data that represents the size
of the original input. The decompressors (the self-extracting kernel)
exploit it to know the vmlinux size beforehand. To mimic the GZIP's
trailer, Kbuild provides cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}.
Unfortunately these macros are used everywhere despite the appended
size data is only useful for the decompressors.
There is no guarantee that such hand-crafted trailers are safely ignored.
In fact, the kernel refuses compressed initramdfs with the garbage data.
That is why usr/Makefile overrides size_append to make it no-op.
To limit the use of such broken compressed files, this commit renames
the existing macros as follows:
cmd_bzip2 --> cmd_bzip2_with_size
cmd_lzma --> cmd_lzma_with_size
cmd_lzo --> cmd_lzo_with_size
cmd_lz4 --> cmd_lz4_with_size
cmd_xzkern --> cmd_xzkern_with_size
cmd_zstd22 --> cmd_zstd22_with_size
To keep the decompressors working, I updated the following Makefiles
accordingly:
arch/arm/boot/compressed/Makefile
arch/h8300/boot/compressed/Makefile
arch/mips/boot/compressed/Makefile
arch/parisc/boot/compressed/Makefile
arch/s390/boot/compressed/Makefile
arch/sh/boot/compressed/Makefile
arch/x86/boot/compressed/Makefile
I reused the current macro names for the normal usecases; they produce
the compressed data in the proper format.
I did not touch the following:
arch/arc/boot/Makefile
arch/arm64/boot/Makefile
arch/csky/boot/Makefile
arch/mips/boot/Makefile
arch/riscv/boot/Makefile
arch/sh/boot/Makefile
kernel/Makefile
This means those Makefiles will stop appending the size data.
I dropped the 'override size_append' hack from usr/Makefile.
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Nicolas Schier <[email protected]>
|
|
Fix the following build issues:
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_buildDTable_internal':
decompress.c:(.text.FSE_buildDTable_internal+0x2cc): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `BIT_initDStream':
decompress.c:(.text.BIT_initDStream+0x7c): undefined reference to `__clzdi2'
mips64el-linux-ld: decompress.c:(.text.BIT_initDStream+0x158): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_buildFSETable_body_default.constprop.0':
decompress.c:(.text.ZSTD_buildFSETable_body_default.constprop.0+0x2a8): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_readNCount_body_default':
decompress.c:(.text.FSE_readNCount_body_default+0x130): undefined reference to `__ctzdi2'
mips64el-linux-ld: decompress.c:(.text.FSE_readNCount_body_default+0x1a4): undefined reference to `__ctzdi2'
mips64el-linux-ld: decompress.c:(.text.FSE_readNCount_body_default+0x2e4): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `HUF_readStats_body_default':
decompress.c:(.text.HUF_readStats_body_default+0x184): undefined reference to `__clzdi2'
mips64el-linux-ld: decompress.c:(.text.HUF_readStats_body_default+0x1b4): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_DCtx_getParameter':
decompress.c:(.text.ZSTD_DCtx_getParameter+0x60): undefined reference to `__clzdi2'
Fixes: a510b616131f ("MIPS: Add support for ZSTD-compressed kernels")
Reported-by: kernel test robot <[email protected]>
Reported-by: Nick Terrell <[email protected]>
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
If this option is not 0x0, it will be used for zboot load address.
Otherwise, the result of calc_vmlinuz_load_addr will be used.
The zload-y value for generic are also removed then, as the current
value breaks booting on qemu -M boston.
The result of calc_vmlinuz_load_addr works well for most of cases.
The default value of bcm47xx keeps as it currently.
Signed-off-by: YunQiang Su <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
Just like before with __bswapdi2(), for MIPS pre-boot when
CONFIG_KERNEL_ZSTD=y the decompressor function will use __ashldi3(), so
the object file should be added to the target object file.
Fixes these build errors:
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_buildDTable_internal':
decompress.c:(.text.FSE_buildDTable_internal+0x48): undefined reference to `__ashldi3'
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_decompress_wksp_body_default':
decompress.c:(.text.FSE_decompress_wksp_body_default+0xa8): undefined reference to `__ashldi3'
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_getFrameHeader_advanced':
decompress.c:(.text.ZSTD_getFrameHeader_advanced+0x134): undefined reference to `__ashldi3'
Signed-off-by: Paul Cercueil <[email protected]>
Reviewed-by: Randy Dunlap <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
As commit 7ae4a78daacf ("ARM: 8969/1: decompressor: simplify libfdt
builds") stated, copying source files during the build time may not
end up with as clean code as expected.
Do similar for mips to clean up the Makefile and .gitignore.
Signed-off-by: Masahiro Yamada <[email protected]>
Tested-by: Paul Cercueil <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
For MIPS pre-boot, when CONFIG_KERNEL_ZSTD=y, the decompressor
function uses __bswapdi2(), so this object file should be added to
the target object file.
Fixes these build errors:
mips-linux-ld: arch/mips/boot/compressed/decompress.o: in function `xxh64':
decompress.c:(.text+0x8be0): undefined reference to `__bswapdi2'
mips-linux-ld: decompress.c:(.text+0x8c78): undefined reference to `__bswapdi2'
mips-linux-ld: decompress.c:(.text+0x8d04): undefined reference to `__bswapdi2'
mips-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0xa010): more undefined references to `__bswapdi2' follow
Fixes: 0652035a5794 ("asm-generic: unaligned: remove byteshift helpers")
Fixes: cddc40f5617e ("mips: always link byteswap helpers into decompressor")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: [email protected]
Acked-by: Arnd Bergmann <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
My series to clean up the unaligned access implementation
across architectures caused some mips randconfig builds to
fail with:
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `decompress_kernel':
decompress.c:(.text.decompress_kernel+0x54): undefined reference to `__bswapsi2'
It turns out that this problem has already been fixed for the XZ
decompressor but now it also shows up in (at least) LZO and LZ4. From my
analysis I concluded that the compiler could always have emitted those
calls, but the different implementation allowed it to make otherwise
better decisions about not inlining the byteswap, which results in the
link error when the out-of-line code is missing.
While it could be addressed by adding it to the two decompressor
implementations that are known to be affected, but as this only adds
112 bytes to the kernel, the safer choice is to always add them.
Fixes: c50ec6787536 ("MIPS: zboot: Fix the build with XZ compression on older GCC versions")
Fixes: 0652035a5794 ("asm-generic: unaligned: remove byteshift helpers")
Link: https://lore.kernel.org/linux-mm/[email protected]/
Link: https://lore.kernel.org/linux-mm/[email protected]/
Link: https://lore.kernel.org/linux-mm/[email protected]/
Link: https://lore.kernel.org/linux-mm/[email protected]/
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
This patch replaces the "open-coded" -pg compile flag with a CC_FLAGS_FTRACE
makefile variable which architectures can override if a different option
should be used for code generation.
Signed-off-by: zhaoxiao <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
Commit 1e35918ad9d1 ("MIPS: Enable Undefined Behavior Sanitizer
UBSAN") added a possibility to build the entire kernel with UBSAN
instrumentation for MIPS, with the exception for VDSO.
However, self-extracting head wasn't been added to exceptions, so
this occurs:
mips-alpine-linux-musl-ld: arch/mips/boot/compressed/decompress.o:
in function `FSE_buildDTable_wksp':
decompress.c:(.text.FSE_buildDTable_wksp+0x278): undefined reference
to `__ubsan_handle_shift_out_of_bounds'
mips-alpine-linux-musl-ld: decompress.c:(.text.FSE_buildDTable_wksp+0x2a8):
undefined reference to `__ubsan_handle_shift_out_of_bounds'
mips-alpine-linux-musl-ld: decompress.c:(.text.FSE_buildDTable_wksp+0x2c4):
undefined reference to `__ubsan_handle_shift_out_of_bounds'
mips-alpine-linux-musl-ld: arch/mips/boot/compressed/decompress.o:
decompress.c:(.text.FSE_buildDTable_raw+0x9c): more undefined references
to `__ubsan_handle_shift_out_of_bounds' follow
Add UBSAN_SANITIZE := n to mips/boot/compressed/Makefile to exclude
it from instrumentation scope and fix this issue.
Fixes: 1e35918ad9d1 ("MIPS: Enable Undefined Behavior Sanitizer UBSAN")
Cc: [email protected] # 5.0+
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
Enable gcov profiling of the entire kernel on mips. Required changes
include disabling profiling for:
* arch/kernel/boot/compressed: not linked to main kernel.
Lightly tested on Loongson 3A3000 an 3A4000, seems to work as expected.
without "GCOV_PROFILE := n" in compressed Makefile,
build errors as follows:
...
ld: arch/mips/boot/compressed/string.o:(.data+0x88):
undefined reference to `__gcov_merge_add'
ld: arch/mips/boot/compressed/string.o:
in function `_GLOBAL__sub_I_00100_0_memcpy':
string.c:(.text.startup+0x4): undefined reference to `__gcov_init'
ld: arch/mips/boot/compressed/string.o:
in function `_GLOBAL__sub_D_00100_1_memcpy':
string.c:(.text.exit+0x0): undefined reference to `__gcov_exit'
...
Signed-off-by: Youling Tang <[email protected]>
Signed-off-by: Xingxing Su <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
Commit c3e2ee657418 ("MIPS: generic: Add support for zboot") added
support for self-extracting images to Generic MIPS. However, the
intended way to boot Generic MIPS kernels is using FIT Images and
UHI boot protocol, but currently there's no way to make self-extracting
FIT Image (only legacy uzImages).
Add a target for this named "vmlinuz.itb", which will consist of
vmlinuz.bin and selected DT blobs. It will allow to have the advantages
of both UHI and self-extracting images.
Signed-off-by: Alexander Lobakin <[email protected]>
Acked-by: Paul Cercueil <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
1. All final targets like vmlinuz.{bin,ecoff,srec} etc. should reside in
$(objtree)/arch/mips/boot, not in the root $(objtree) directory.
The only file that should be left there is vmlinuz, similar to other
architectures.
2. Add all the targets to $(targets) variable, so they'll be properly
accounted by Kbuild. This also allows to remove redundant
$(clean-files) (which were missing uzImage BTW).
3. Prefix all targets with $(obj)/$(objtree), depending on their
locations.
Misc: fix the identation of the 'STRIP' quiet message.
Signed-off-by: Alexander Lobakin <[email protected]>
Acked-by: Paul Cercueil <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
Loongson-3's COP2 is Multi-Media coprocessor, it is disabled in kernel
mode by default. However, gslq/gssq (16-bytes load/store instructions)
overrides the instruction format of lwc2/swc2. If we wan't to use gslq/
gssq for optimization in kernel, we should enable COP2 usage in kernel.
Please pay attention that in this patch we only enable COP2 in kernel,
which means it will lose ST0_CU2 when a process go to user space (try
to use COP2 in user space will trigger an exception and then grab COP2,
which is similar to FPU). And as a result, we need to modify the context
switching code because the new scheduled process doesn't contain ST0_CU2
in its THERAD_STATUS probably.
For zboot, we disable gslq/gssq be generated by toolchain.
Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
Add support for self-extracting kernels with a ZSTD compression.
Tested on a kernel for the GCW-Zero, it allows to reduce the size of the
kernel file from 4.1 MiB with gzip to 3.5 MiB with ZSTD, and boots just
as fast.
Compressed kernels are now also compiled with -D__DISABLE_EXPORTS in
order to disable the EXPORT_SYMBOL() macros inside of
lib/zstd/decompress.c.
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
LLD failed to link vmlinux with 64bit load address for 32bit ELF
while bfd will strip 64bit address into 32bit silently.
To fix LLD build, we should truncate load address provided by platform
into 32bit for 32bit kernel.
Signed-off-by: Jiaxun Yang <[email protected]>
Link: https://github.com/ClangBuiltLinux/linux/issues/786
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=25784
Reviewed-by: Fangrui Song <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Cc: Maciej W. Rozycki <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
__sanitizer_cov_trace_pc() is not linked in and causing link
failure if KCOV_INSTRUMENT is enabled. Fix this by disabling
instrumentation for compressed image.
Signed-off-by: Jouni Hogander <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: Lukas Bulwahn <[email protected]>
Cc: [email protected]
|
|
calc_vmlinuz_load_addr.c requires SZ_64K to be defined for alignment
purposes. It included "../../../../include/linux/sizes.h" to define
that size, however "sizes.h" tries to include <linux/const.h> which
assumes linux system headers. These may not exist eg. the following
error was encountered when building Linux for OpenWrt under macOS:
In file included from arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:16:
arch/mips/boot/compressed/../../../../include/linux/sizes.h:11:10: fatal error: 'linux/const.h' file not found
^~~~~~~~~~
Change makefile to force building on local linux headers instead of
system headers. Also change eye-watering relative reference in include
file spec.
Thanks to Jo-Philip Wich & Petr Štetiar for assistance in tracking this
down & fixing.
Suggested-by: Jo-Philipp Wich <[email protected]>
Signed-off-by: Petr Štetiar <[email protected]>
Signed-off-by: Kevin Darbyshire-Bryant <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: [email protected]
|
|
Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add
additional options to CC") renamed CFLAGS to KBUILD_CFLAGS.
Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add
additional options to AS") renamed AFLAGS to KBUILD_AFLAGS.
Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add
additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS.
For some reason, LDFLAGS was not renamed.
Using a well-known variable like LDFLAGS may result in accidental
override of the variable.
Kbuild generally uses KBUILD_ prefixed variables for the internally
appended options, so here is one more conversion to sanitize the
naming convention.
I did not touch Makefiles under tools/ since the tools build system
is a different world.
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Reviewed-by: Palmer Dabbelt <[email protected]>
|
|
In preparation for removing some of the MIPS compiler intrinsics from
arch/mips/lib, first update the build of vmlinuz to use the generic
ashldi3 from lib.
Both ashldi3 and bswapsi objects need to be built with different CFLAGS
for inclusion to vmlinuz rather than simply including the object built
for the main kernel image. The objects cannot be built directly from
source, since CONFIG_MODVERSIONS changes cmd_cc_o_c to prevent this.
Split the rule to ship ashldi3 and bswapsi from the relevant source
locations.
These files make no reference to other files in their directory, so the
additional CFLAGS are apparently unnecessary - remove them as well.
Signed-off-by: Matt Redfearn <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Antony Pavlov <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/19050/
[[email protected]: Add if_changed and FORCE to fix build failure when
arch/mips/boot/compressed/ashldi3.c is already generated but there is
no .ashldi3.c.cmd file yet]
Signed-off-by: James Hogan <[email protected]>
|
|
Make doesn't expand shell style "vmlinuz.{32,ecoff,bin,srec}" to the 4
separate files, so none of these files get cleaned up by make clean.
List the files separately instead.
Fixes: ec3352925b74 ("MIPS: Remove all generated vmlinuz* files on "make clean"")
Signed-off-by: James Hogan <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/18491/
|
|
Al Viro noticed that we were using two different methods to filter out
flags from KBUILD_CFLAGS.
Signed-off-by: Ralf Baechle <[email protected]>
Reported-by: Al Viro <[email protected]>
|
|
The make variables KBUILD_CFLAGS and KBUILD_AFLAGS both contain
$(LINUXINCLUDE). But the build already picks up $(LINUXINCLUDE) from
scripts/Makefile.lib. The net effect is that the (long) list of include
directories is used twice.
This is harmless but pointless. So stop using $(LINUXINCLUDE) twice.
Signed-off-by: Paul Bolle <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/14622/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
uzImage.bin is vmlinuz.bin wrapped in a legacy U-Boot image. Since
the extraction code is inside the image, it does not depend on the
boot loader to extract the kernel.
Signed-off-by: Maarten ter Huurne <[email protected]>
Cc: Alban Bedel <[email protected]>
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/14473/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Reuse the early printk code to support the serial in zboot. We copy
early_printk.c instead of referencing it because we need to build a
different object file for the normal kernel and zboot.
Signed-off-by: Alban Bedel <[email protected]>
Cc: Andrew Bresticker <[email protected]>
Cc: Alex Smith <[email protected]>
Cc: Wu Zhangjin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/12234/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
The copied source files must be added to the extra-y list to have them
removed on clean.
Signed-off-by: Alban Bedel <[email protected]>
Cc: Andrew Bresticker <[email protected]>
Cc: Alex Smith <[email protected]>
Cc: Wu Zhangjin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/12233/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Some older GCC version (at least 4.6) emits calls to __bswapsi2() when
building the XZ decompressor. The link of the compressed image then
fails with the following error:
arch/mips/boot/compressed/decompress.o: In function '__fswab32':
include/uapi/linux/swab.h:60: undefined reference to '__bswapsi2'
Add bswapsi.o to the link to fix the build with these versions.
Signed-off-by: Alban Bedel <[email protected]>
Cc: Andrew Bresticker <[email protected]>
Cc: Alex Smith <[email protected]>
Cc: Wu Zhangjin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/12232/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
As most platforms implement the PROM serial interface prom_putchar()
add a simple bridge to allow re-using this code for zboot.
Signed-off-by: Alban Bedel <[email protected]>
Cc: Alex Smith <[email protected]>
Cc: Andrew Bresticker <[email protected]>
Cc: Wu Zhangjin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/11811/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Add dummy.o to the targets list, and fill targets automatically from
$(vmlinuzobjs) to avoid having to maintain two lists.
When building with XZ compression copy ashldi3.c to the build
directory to use a different object file for the kernel and zboot.
Without this the same object file need to be build with different
flags which cause a rebuild at every run.
Signed-off-by: Alban Bedel <[email protected]>
Cc: [email protected]
Cc: Alex Smith <[email protected]>
Cc: Wu Zhangjin <[email protected]>
Cc: Andrew Bresticker <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/11810/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
The "LD vmlinuz" line in the quiet build output is misaligned with the
rest of the output. Fix this.
Signed-off-by: Alex Smith <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/11019/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
!CONFIG_DEBUG_ZBOOT doesn't need puts() and puthex(), remove them and
the corrospindig strings for !CONFIG_DEBUG_ZBOOT, as a result, it saves
about 1280 bytes.
[[email protected]: Resolved reject.]
Signed-off-by: Wu Zhangjin <[email protected]>
Cc: [email protected]
Cc: Wu Zhangjin <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/1898/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Platforms which use raw zboot images may need to link the image at
a fixed address if there is no other way to communicate the load
address to the bootloader. Allow the per-platform Kbuild files
to specify an optional zboot image load address (zload-y) and fall
back to calc_vmlinuz_load_addr if unset.
Signed-off-by: Andrew Bresticker <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Andrew Bresticker <[email protected]>
Cc: Ezequiel Garcia <[email protected]>
Cc: James Hartley <[email protected]>
Cc: James Hogan <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/9566/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
In the worst case this adds less then 128 bytes of code
but on the other hand this makes code organization more clear.
Signed-off-by: Antony Pavlov <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Cc: [email protected]
Cc: Ralf Baechle <[email protected]>
Cc: John Crispin <[email protected]>
Cc: Florian Fainelli <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: John Crispin <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/6344/
|
|
Add support for the LZ4 compression scheme in the ZBOOT decompression
stub, in order to support it we need to:
- select the "lz4" compression tool to compress the vmlinux.bin
payload
- memcpy() is also required for decompress_unlz4.c so we share the
implementation between GZIP, XZ and now LZ4
Signed-off-by: Florian Fainelli <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/5829/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Add support for the XZ compression scheme in the ZBOOT decompression
stub, in order to support it we need to:
- select the "xzkern" compression tool to compress the vmlinux.bin
payload
- link with ashldi3.o for xz_dec_run() to work
- memcpy() is also required for decompress_unxz.c so we share the
implementation between GZIP and XZ
Signed-off-by: Florian Fainelli <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/5818/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
The vmlinux load address and entry address is calculated in multiple
places:
- arch/mips/Makefile defines load-y from CONFIG_PHYSICAL_START (or
defined by the platform) and passes it to
arch/mips/boot/compressed/Makefile.
- arch/mips/boot/compressed/Makefile calculates kernel entry using nm.
- arch/mips/lasat/image/Makefile calculates both load and entry address
using nm.
Lets combine these in the main Makefile and then pass them as Make
parameters to each of the three boot image Makefiles (in boot/,
boot/compressed, lasat/image/). The boot/ Makefile doesn't currently use
them, but will soon need to for U-Boot image targets.
The existing load-y definition is used in preference to calculating the
load address using nm.
Signed-off-by: James Hogan <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/5794/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
When building with -fstack-protector, gcc emits the __stack_chk_guard and
__stack_chk_fail symbols to check for stack stability. These symbols are
defined in vmlinux but the generated vmlinux.bin that is used to create
the compressed vmlinuz image has no symbol table so the linker can't find
these symbols during the final linking phase. As a result of which, we
need either to redefine these symbols just for the compressed image or drop
the -fstack-protector option when building the compressed image. This patch
implements the latter of two options.
Fixes the following linking problem:
dbg.c:(.text+0x7c): undefined reference to `__stack_chk_guard'
dbg.c:(.text+0x80): undefined reference to `__stack_chk_guard'
dbg.c:(.text+0xd4): undefined reference to `__stack_chk_guard'
dbg.c:(.text+0xec): undefined reference to `__stack_chk_fail'
[[email protected]: I'm applying this before the patch that actually adds
stack protector support for MIPS. This means, it will not be possible
to trigger above error message with any commit from the tree but rather
they are what one would hit without this commit.]
Signed-off-by: Markos Chandras <[email protected]>
Cc: [email protected]
Cc: Markos Chandras <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/5575/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.
Signed-off-by: Ralf Baechle <[email protected]>
|
|
This patch adds support for building a compressed kernel for the JZ4740
architecture.
Signed-off-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Maarten ter Huurne <[email protected]>
Cc: Sergei Shtylyov <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/3563/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus:
MIPS: Enable ISA_DMA_API config to fix build failure
MIPS: 32-bit: Fix build failure in asm/fcntl.h
MIPS: Remove all generated vmlinuz* files on "make clean"
MIPS: do_sigaltstack() expects userland pointers
MIPS: Fix error values in case of bad_stack
MIPS: Sanitize restart logics
MIPS: secure_computing, syscall audit: syscall number should in r2, not r0.
MIPS: Don't block signals if we'd failed to setup a sigframe
|
|
[Ralf: I changed the patch to explicitly list all files to be deleted out
of paranoia.]
Signed-off-by: Wu Zhangjin <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/1590/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Fix VMLINUZ_LOAD_ADDRESS calculation to be based on the length of
vmlinux.bin, the actual uncompressed kernel binary.
Previously it was based on the length of KBUILD_IMAGE (the unstripped ELF
vmlinux), which is bigger than vmlinux.bin. As a result, vmlinuz was
loaded into a memory address higher then actually needed - a problem for
small memory platforms.
Signed-off-by: Shmulik Ladkani <[email protected]>
To: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/1564/
Acked-by: Wu Zhangjin <[email protected]>
Signed-off-by: Ralf Baechle <[email protected]>
|
|
This patch use "strip -s" to strip the .symtab and .strtab sections of
vmlinuz.
Note: This patch is based on http://patchwork.linux-mips.org/patch/1324/
Signed-off-by: Wu Zhangjin <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/1383/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
We have calculated VMLINUZ_LOAD_ADDRESS in shell, which is indecipherable. This
patch rewrites it in C.
Signed-off-by: Wu Zhangjin <[email protected]>
To: linux-mips <[email protected]>
Cc: Alexander Clouter <[email protected]>
Cc: Manuel Lauss <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Reviewed-by: Alexander Clouter <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/1324/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
The compressed vmlinux.bin is only a temp file so it's ok to use the same
suffix .z for them (.gz,.lzo,.lzma...) to remove several lines and simpify
the maintenance (no need to add the "suffix_$(xxx) := suffix" line).
Signed-off-by: Wu Zhangjin <[email protected]>
To: linux-mips <[email protected]>
Cc: Alexander Clouter <[email protected]>
Cc: Manuel Lauss <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/1323/
Signed-off-by: Ralf Baechle <[email protected]>
---
|
|
Remove the CONFIG_SOC_AU1X00 Kconfig symbol since its job can also be done
by MACH_ALCHEMY, now renamed to MIPS_ALCHEMY.
Signed-off-by: Manuel Lauss <[email protected]>
To: Linux-MIPS <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/1461/
Signed-off-by: Ralf Baechle <[email protected]>
|