aboutsummaryrefslogtreecommitdiff
path: root/arch/m68k/atari
AgeCommit message (Collapse)AuthorFilesLines
2024-07-01m68k: atari: Fix TT bootup freeze / unexpected (SCU) interrupt messagesEero Tamminen1-5/+1
Avoid freeze on Atari TT / MegaSTe boot with continuous messages of: unexpected interrupt from 112 Which was due to VBL interrupt being enabled in SCU sys mask, but there being no handler for that any more. (Bug and fix were first verified on real Atari TT HW by Christian, this patch later on in Hatari emulator.) Fixes: 1fa0b29f3a43f9dd ("fbdev: Kill Atari vblank cursor blinking") Reported-by: Nicolas Pomarède <[email protected]> Closes: https://listengine.tuxfamily.org/lists.tuxfamily.org/hatari-devel/2024/06/msg00016.html Closes: https://lore.kernel.org/all/[email protected] Tested-by: Christian Zietz <[email protected]> Signed-off-by: Eero Tamminen <[email protected]> Reviewed-by: Michael Schmitz <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2023-10-06m68k: atari: Add and use "atari.h"Geert Uytterhoeven5-11/+21
When building with W=1: arch/m68k/atari/time.c:59:1: warning: no previous prototype for ‘atari_sched_init’ [-Wmissing-prototypes] 59 | atari_sched_init(void) | ^~~~~~~~~~~~~~~~ arch/m68k/atari/time.c:140:5: warning: no previous prototype for ‘atari_mste_hwclk’ [-Wmissing-prototypes] 140 | int atari_mste_hwclk( int op, struct rtc_time *t ) | ^~~~~~~~~~~~~~~~ arch/m68k/atari/time.c:199:5: warning: no previous prototype for ‘atari_tt_hwclk’ [-Wmissing-prototypes] 199 | int atari_tt_hwclk( int op, struct rtc_time *t ) | ^~~~~~~~~~~~~~ arch/m68k/atari/ataints.c:267:13: warning: no previous prototype for ‘atari_init_IRQ’ [-Wmissing-prototypes] 267 | void __init atari_init_IRQ(void) | ^~~~~~~~~~~~~~ arch/m68k/atari/atasound.c:36:6: warning: no previous prototype for ‘atari_microwire_cmd’ [-Wmissing-prototypes] 36 | void atari_microwire_cmd (int cmd) | ^~~~~~~~~~~~~~~~~~~ arch/m68k/atari/atasound.c:53:6: warning: no previous prototype for ‘atari_mksound’ [-Wmissing-prototypes] 53 | void atari_mksound (unsigned int hz, unsigned int ticks) | ^~~~~~~~~~~~~ Fix this by introducing a new header file "atari.h" for holding the prototypes of functions implemented in arch/m68k/atari/. Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/336e4a478ccbfd7e3e91cdbd27636947587a23a6.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: atari: Make atari_stram_map_pages() staticGeert Uytterhoeven1-1/+1
When building with W=1: arch/m68k/atari/stram.c:118:12: warning: no previous prototype for ‘atari_stram_map_pages’ [-Wmissing-prototypes] 118 | int __init atari_stram_map_pages(void) | ^~~~~~~~~~~~~~~~~~~~~ Fix this by making atari_stram_map_pages() static. There was never a user outside arch/m68k/atari/stram.c. Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/fa86b6d7e54d96ac52f574ed00f96e339f46990f.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: atari: Make atari_platform_init() staticGeert Uytterhoeven1-1/+1
When building with W=1: arch/m68k/atari/config.c:883:12: warning: no previous prototype for ‘atari_platform_init’ [-Wmissing-prototypes] 883 | int __init atari_platform_init(void) | ^~~~~~~~~~~~~~~~~~~ Fix this by making atari_platform_init() static. There was never a user outside arch/m68k/atari/config.c. Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/417b46ec1945212c0b1fcc8b0f4074bae9a8b0b4.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: atari: Make ikbd_reset() staticGeert Uytterhoeven1-1/+1
When building with W=1: arch/m68k/atari/atakeyb.c:335:6: warning: no previous prototype for ‘ikbd_reset’ [-Wmissing-prototypes] 335 | void ikbd_reset(void) | ^~~~~~~~~~ Fix this by making ikbd_reset() static. There was never a user outside arch/m68k/atari/atakey.c. Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/6babf691fff55f913808ad845e66f60ab00063b2.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: atari: Document data parameter of stdma_try_lock()Geert Uytterhoeven1-0/+1
When building with W=1: arch/m68k/atari/stdma.c:69: warning: Function parameter or member 'data' not described in 'stdma_try_lock' Fix this by documenting the data parameter. Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/a69dd3ab0a224e40ce5ce7b30981e2d7a0285a83.1694613528.git.geert@linux-m68k.org
2022-03-21Merge tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+0
Pull block updates from Jens Axboe: - BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo) - blk-rq-qos completion fix (Tejun) - blk-cgroup merge fix (Tejun) - Add offline error return value to distinguish it from an IO error on the device (Song) - IO stats fixes (Zhang, Christoph) - blkcg refcount fixes (Ming, Yu) - Fix for indefinite dispatch loop softlockup (Shin'ichiro) - blk-mq hardware queue management improvements (Ming) - sbitmap dead code removal (Ming, John) - Plugging merge improvements (me) - Show blk-crypto capabilities in sysfs (Eric) - Multiple delayed queue run improvement (David) - Block throttling fixes (Ming) - Start deprecating auto module loading based on dev_t (Christoph) - bio allocation improvements (Christoph, Chaitanya) - Get rid of bio_devname (Christoph) - bio clone improvements (Christoph) - Block plugging improvements (Christoph) - Get rid of genhd.h header (Christoph) - Ensure drivers use appropriate flush helpers (Christoph) - Refcounting improvements (Christoph) - Queue initialization and teardown improvements (Ming, Christoph) - Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng, Lukas, Nian, Yang, Eric, Chengming) * tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits) block: cancel all throttled bios in del_gendisk() block: let blkcg_gq grab request queue's refcnt block: avoid use-after-free on throttle data block: limit request dispatch loop duration block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative" sr: simplify the local variable initialization in sr_block_open() block: don't merge across cgroup boundaries if blkcg is enabled block: fix rq-qos breakage from skipping rq_qos_done_bio() block: flush plug based on hardware and software queue order block: ensure plug merging checks the correct queue at least once block: move rq_qos_exit() into disk_release() block: do more work in elevator_exit block: move blk_exit_queue into disk_release block: move q_usage_counter release into blk_queue_release block: don't remove hctx debugfs dir from blk_mq_exit_queue block: move blkcg initialization/destroy into disk allocation/release handler sr: implement ->free_disk to simplify refcounting sd: implement ->free_disk to simplify refcounting sd: delay calling free_opal_dev sd: call sd_zbc_release_disk before releasing the scsi_device reference ...
2022-02-21m68k: Add asm/config.hLaurent Vivier1-0/+1
To avoid 'warning: no previous prototype for' errors, declare all the parse_bootinfo and config function prototypes into asm/config.h and include it in arch/m68k/kernel/setup_mm.c and arch/m68k/*/config.c. Signed-off-by: Laurent Vivier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2022-02-02block: remove genhd.hChristoph Hellwig1-1/+0
There is no good reason to keep genhd.h separate from the main blkdev.h header that includes it. So fold the contents of genhd.h into blkdev.h and remove genhd.h entirely. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Martin K. Petersen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2021-06-10m68k/q40: Replace q40ide driver with pata_falcon and falconideFinn Thain1-10/+2
This allows m68k q40 systems to switch from the deprecated IDE subsystem to libata. Enhance the byte-swapping falconide and pata_falcon platform drivers to accept an irq resource, for use on q40. Atari ST-DMA IRQ arrangements seem to co-exist with q40 IRQ arrangements without too much mess. The new IO resources were added solely for the purpose of making request_region() reservations identical to those made by q40ide: these regions aren't used for actual IO. Cc: Michael Schmitz <[email protected]> Cc: Richard Zidlicky <[email protected]> Reviewed-and-tested-by: Michael Schmitz <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Finn Thain <[email protected]> Link: https://lore.kernel.org/r/eefb7e9c2291e09fb4e065ce06bc105f05bb9e06.1623287706.git.fthain@linux-m68k.org Signed-off-by: Jens Axboe <[email protected]>
2021-05-07treewide: remove editor modelines and cruftMasahiro Yamada1-7/+0
The section "19) Editor modelines and other cruft" in Documentation/process/coding-style.rst clearly says, "Do not include any of these in source files." I recently receive a patch to explicitly add a new one. Let's do treewide cleanups, otherwise some people follow the existing code and attempt to upstream their favoriate editor setups. It is even nicer if scripts/checkpatch.pl can check it. If we like to impose coding style in an editor-independent manner, I think editorconfig (patch [1]) is a saner solution. [1] https://lore.kernel.org/lkml/[email protected]/ Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Miguel Ojeda <[email protected]> [auxdisplay] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-12-16Merge tag 'asm-generic-timers-5.11' of ↵Linus Torvalds2-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform
2020-11-02m68k: Remove unused mach_max_dma_addressLaurent Vivier1-1/+0
This information is unused since the discontinuous memory support has been introduced in 2007. Fixes: 12d810c1b8c2 ("m68k: discontinuous memory support") Signed-off-by: Laurent Vivier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-10-30m68k: remove timer_interrupt() functionArnd Bergmann2-2/+2
This gets passed to a number of init functions, but is ignored everywhere, so remove the function and change the mach_sched_init callback to take no arguments. Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-10-30m68k: change remaining timers to legacy_timer_tickArnd Bergmann1-3/+2
There are nine more machines that each have their own timer interrupt calling the m68k timer_interrupt() function through an indirect pointer. This function is now the same as legacy_timer_tick, so just call that directly and select the corresponding Kconfig symbol. Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-10-30m68k: split heartbeat out of timer functionArnd Bergmann1-0/+2
The heartbeat functionality is mostly separate from the actual timer interrupt handling, and it is only used on five platforms. Split it out into a separate function and call that directly from the timer irq on those platforms. Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport2-2/+0
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Nick Hu <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vincent Chen <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2019-11-18m68k/atari: Convert Falcon IDE drivers to platform driversMichael Schmitz1-0/+27
Autoloading of Falcon IDE driver modules requires converting these drivers to platform drivers. Add platform device for Falcon IDE interface in Atari platform setup code. Use this in the pata_falcon driver in place of the simple platform device set up on the fly. Convert falconide driver to use the same platform device that is used by pata_falcon also. (With the introduction of a platform device for the Atari Falcon IDE interface, the old Falcon IDE driver no longer loads (resource already claimed by the platform device)). Tested (as built-in driver) on my Atari Falcon. Signed-off-by: Michael Schmitz <[email protected]> Acked-by: Bartlomiej Zolnierkiewicz <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2019-08-19m68k: atari: Rename shifter to shifter_st to avoid conflictGeert Uytterhoeven1-3/+3
When test-compiling the BCM2835 pin control driver on m68k: In file included from arch/m68k/include/asm/io_mm.h:32:0, from arch/m68k/include/asm/io.h:8, from include/linux/io.h:13, from include/linux/irq.h:20, from include/linux/gpio/driver.h:7, from drivers/pinctrl/bcm/pinctrl-bcm2835.c:17: drivers/pinctrl/bcm/pinctrl-bcm2835.c: In function 'bcm2711_pull_config_set': arch/m68k/include/asm/atarihw.h:190:22: error: expected identifier or '(' before 'volatile' # define shifter ((*(volatile struct SHIFTER *)SHF_BAS)) "shifter" is a too generic name for a global definition. As the corresponding definition for Atari TT is already called "shifter_tt", fix this by renaming the definition for Atari ST to "shifter_st". Reported-by: kbuild test robot <[email protected]> Suggested-by: Michael Schmitz <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Linus Walleij <[email protected]>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-03-25m68k: atari: Convert to clocksource APIFinn Thain1-17/+36
Add a platform clocksource by adapting the existing arch_gettimeoffset implementation. Normally the MFP timer C interrupt flag would be used to check for timer counter wrap-around. Unfortunately, that flag gets cleared by the MFP itself (due to automatic End-of-Interrupt mode). This means that mfp_timer_c_handler() and atari_read_clk() must race when accounting for counter wrap-around. That problem is avoided by effectively stopping the clock when it might otherwise jump backwards (due to interrupt latency). Note that this may affect clock accuracy. After the timer interrupt is asserted, wait for the counter to be reloaded so that atari_read_clk() will not see the intermediate state as that would cause the clock to jump backwards. Signed-off-by: Finn Thain <[email protected]> Acked-by: Linus Walleij <[email protected]> Tested-by: Michael Schmitz <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2019-03-25m68k: Drop ARCH_USES_GETTIMEOFFSETFinn Thain1-2/+0
The functions that implement arch_gettimeoffset are re-used by new clocksource drivers in subsequent patches. Signed-off-by: Finn Thain <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2019-03-25m68k: Call timer_interrupt() with interrupts disabledFinn Thain2-3/+16
Some platforms execute their timer handler with the interrupt priority level set below 6. That means the handler could be interrupted by another driver and this could lead to re-entry of the timer core. Avoid this by use of local_irq_save/restore for timer interrupt dispatch. This provides mutual exclusion around the timer interrupt flag access which is needed later in this series for the clocksource conversion. Reported-by: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2019-03-12treewide: add checks for the return value of memblock_alloc*()Mike Rapoport1-0/+4
Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [[email protected]: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [[email protected]: fix xtensa printk warning] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Anders Roxell <[email protected]> Reviewed-by: Guo Ren <[email protected]> [c-sky] Acked-by: Paul Burton <[email protected]> [MIPS] Acked-by: Heiko Carstens <[email protected]> [s390] Reviewed-by: Juergen Gross <[email protected]> [Xen] Reviewed-by: Geert Uytterhoeven <[email protected]> [m68k] Acked-by: Max Filippov <[email protected]> [xtensa] Cc: Catalin Marinas <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Dennis Zhou <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Guo Ren <[email protected]> Cc: Mark Salter <[email protected]> Cc: Matt Turner <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Petr Mladek <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Rob Herring <[email protected]> Cc: Rob Herring <[email protected]> Cc: Russell King <[email protected]> Cc: Stafford Horne <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Yoshinori Sato <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-03-06Merge tag 'char-misc-5.1-rc1' of ↵Linus Torvalds2-0/+274
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time" * tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits) habanalabs: adjust Kconfig to fix build errors habanalabs: use %px instead of %p in error print habanalabs: use do_div for 64-bit divisions intel_th: gth: Fix an off-by-one in output unassigning habanalabs: fix little-endian<->cpu conversion warnings habanalabs: use NULL to initialize array of pointers habanalabs: fix little-endian<->cpu conversion warnings habanalabs: soft-reset device if context-switch fails habanalabs: print pointer using %p habanalabs: fix memory leak with CBs with unaligned size habanalabs: return correct error code on MMU mapping failure habanalabs: add comments in uapi/misc/habanalabs.h habanalabs: extend QMAN0 job timeout habanalabs: set DMA0 completion to SOB 1007 habanalabs: fix validation of WREG32 to DMA completion habanalabs: fix mmu cache registers init habanalabs: disable CPU access on timeouts habanalabs: add MMU DRAM default page mapping habanalabs: Dissociate RAZWI info from event types misc/habanalabs: adjust Kconfig to fix build errors ...
2019-01-22m68k: Dispatch nvram_ops calls to Atari or Mac functionsFinn Thain1-16/+5
A multi-platform kernel binary has to decide at run-time how to dispatch the arch_nvram_ops calls. Add a platform-independent arch_nvram_ops struct for this, to replace the atari-specific one. Enable CONFIG_HAVE_ARCH_NVRAM_OPS for Macs. Acked-by: Geert Uytterhoeven <[email protected]> Tested-by: Stan Johnson <[email protected]> Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-01-22m68k/atari: Implement arch_nvram_ops methods and enable ↵Finn Thain1-0/+24
CONFIG_HAVE_ARCH_NVRAM_OPS Atari RTC NVRAM uses a checksum so implement the remaining arch_nvram_ops methods for the set_checksum and initialize ioctls. Enable CONFIG_HAVE_ARCH_NVRAM_OPS. Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-01-22m68k/atari: Implement arch_nvram_ops structFinn Thain1-0/+49
By implementing an arch_nvram_ops struct, a platform can re-use the drivers/char/nvram.c module without needing any arch-specific code in that module. Atari does so here. Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-01-22nvram: Replace nvram_* function exports with static functionsFinn Thain1-36/+3
Replace nvram_* functions with static functions in nvram.h. These will become wrappers for struct nvram_ops method calls. This patch effectively disables existing NVRAM functionality so as to allow the rest of the series to be bisected without build failures. That functionality is gradually re-implemented in subsequent patches. Replace the sole validate-checksum-and-read-byte sequence with a call to nvram_read() which will gain the same semantics in subsequent patches. Remove unused exports. Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-01-22m68k/atari: Move Atari-specific code out of drivers/char/nvram.cFinn Thain2-0/+245
Move the m68k-specific code out of the driver to make the driver generic. I've used 'SPDX-License-Identifier: GPL-2.0+' for the new file because the old file is covered by MODULE_LICENSE("GPL"). Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-01-21m68k/atari: Avoid VLA use in atari_switches_setup()Geert Uytterhoeven1-1/+1
With gcc 7.3.0: arch/m68k/atari/config.c: In function ‘atari_switches_setup’: arch/m68k/atari/config.c:151:2: warning: ISO C90 forbids variable length array ‘switches’ [-Wvla] char switches[strlen(str) + 1]; ^~~~ Replace the variable size by the maximum kernel command line size (256 bytes), which is an upper limit for all suboptions. Signed-off-by: Geert Uytterhoeven <[email protected]>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-1/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [[email protected]: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/[email protected] [[email protected]: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Matt Turner <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paul Burton <[email protected]> Cc: Richard Kuo <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Serge Semin <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Yoshinori Sato <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-10-31memblock: replace alloc_bootmem_low_pages with memblock_alloc_lowMike Rapoport1-1/+2
The alloc_bootmem_low_pages() function allocates PAGE_SIZE aligned regions from low memory. memblock_alloc_low() with alignment set to PAGE_SIZE does exactly the same thing. The conversion is done using the following semantic patch: @@ expression e; @@ - alloc_bootmem_low_pages(e) + memblock_alloc_low(e, PAGE_SIZE) Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chris Zankel <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Mark Salter <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Matt Turner <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Michal Simek <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paul Burton <[email protected]> Cc: Richard Kuo <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Russell King <[email protected]> Cc: Serge Semin <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Yoshinori Sato <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-07-29m68k: Remove unused set_clock_mmss() helpersArnd Bergmann2-68/+0
Commit 397ac99c6cef ("m68k: remove dead timer code") removed set_rtc_mmss() because it was unused in 2012. However, this was itself the only user of the mach_set_clock_mmss() callback and the many implementations of that callback, which are equally unused. This removes all of those as well. Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Greg Ungerer <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2017-02-12m68k/atari: Modernize printing of kernel messagesGeert Uytterhoeven2-35/+35
- Convert from printk() to pr_*(), - Add missing continuations, to fix user-visible breakage, - Drop useless WARNING prefix, - Move trailing spaces to start of continuations. Note that the "Keyboard overrun" message will now only be generated when the kernel has been compiled for debugging. Fixes: 4bcc595ccd80decb ("printk: reinstate KERN_CONT for printing continuation lines") Signed-off-by: Geert Uytterhoeven <[email protected]>
2016-12-09m68k/atari: Use seq_puts() in atari_get_hardware_list()Markus Elfring1-1/+1
A string which did not contain a data format specification should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2016-09-19m68k: Use IS_ENABLED() instead of checking for built-in or moduleGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <[email protected]>
2016-01-10m68k/atari, m68k/sun3: Fix SCSI platform device registration when driver is ↵Finn Thain1-2/+2
modular Fixes: 3ff228af84b5 ("atari_scsi: Convert to platform device") Fixes: 0d31f8759109 ("sun3_scsi: Convert to platform device") Reported-by: Michael Schmitz <[email protected]> Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2015-01-15m68k/atari: Remove obsolete IRQ_TYPE_*Geert Uytterhoeven3-6/+4
IRQ_TYPE_SLOW, IRQ_TYPE_FAST, and IRQ_TYPE_PRIO are no longer used by the Atari platform interrupt code since commit 734085651c9b80aa ("[PATCH] m68k: convert atari irq code") in v2.6.18-rc1, so drop them. Note that their values have been reused for different purposes (IRQ_TYPE_NONE, IRQ_TYPE_EDGE_RISING, and IRQ_TYPE_EDGE_FALLING) since commit 6a6de9ef5850d063 ("[PATCH] genirq: core") in v2.6.18-rc1. Signed-off-by: Geert Uytterhoeven <[email protected]>
2015-01-13m68k/atari: Remove obsolete keyboard_tasklet schedulingGeert Uytterhoeven1-1/+0
If CONFIG_VT=n: arch/m68k/atari/built-in.o: In function `atari_keyboard_interrupt': atakeyb.c:(.text+0x1846): undefined reference to `keyboard_tasklet' atakeyb.c:(.text+0x1852): undefined reference to `keyboard_tasklet' I think the keyboard_tasklet scheduling is no longer needed, as I believe it's handled by drivers/tty/vt/keyboard.c based on events received from the input subsystem. So just remove it. Signed-off-by: Geert Uytterhoeven <[email protected]> Tested-by: Michael Schmitz <[email protected]>
2015-01-11m68k/atari: atakeyb.c - Remove some unused functionsRickard Strandqvist1-66/+0
Remove some functions that are not used anywhere: atari_kbd_leds() ikbd_exec() ikbd_mem_read() ikbd_mem_write() ikbd_clock_get() ikbd_clock_set() ikbd_pause() ikbd_resume() This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2014-11-20atari_scsi: Convert to platform deviceFinn Thain1-0/+27
Convert atari_scsi to platform device and eliminate scsi_register(). Validate __setup options later on so that module options are checked as well. Remove the comment about the scsi mid-layer disabling the host irq as it is no longer true (AFAICT). Also remove the obsolete slow interrupt stuff (IRQ_TYPE_SLOW == 0 anyway). Signed-off-by: Finn Thain <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Tested-by: Michael Schmitz <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2014-11-20atari_scsi: Fix atari_scsi deadlocks on FalconFinn Thain1-21/+40
Don't disable irqs when waiting for the ST DMA "lock"; its release may require an interrupt. Introduce stdma_try_lock() for use in soft irq context. atari_scsi now tells the SCSI mid-layer to defer queueing a command if the ST DMA lock is not available, as per Michael's patch: http://marc.info/?l=linux-m68k&m=139095335824863&w=2 The falcon_got_lock variable is race prone: we can't disable IRQs while waiting to acquire the lock, so after acquiring it there must be some interval during which falcon_got_lock remains false. Introduce stdma_is_locked_by() to replace falcon_got_lock. The falcon_got_lock tests in the EH handlers are incorrect these days. It can happen that an EH handler is called after a command completes normally. Remove these checks along with falcon_got_lock. Also remove the complicated and racy fairness wait queues. If fairness is an issue (when SCSI competes with IDE for the ST DMA interrupt), the solution is likely to be a lower value for host->can_queue. Signed-off-by: Finn Thain <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Tested-by: Michael Schmitz <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2014-09-14m68k/atari - stram: Add missing #include <linux/ioport.h>Geert Uytterhoeven1-0/+1
If CONFIG_BLOCK=n: arch/m68k/atari/stram.c:44: error: variable ‘stram_pool’ has initializer but incomplete type arch/m68k/atari/stram.c:45: error: unknown field ‘name’ specified in initializer arch/m68k/atari/stram.c:46: warning: excess elements in struct initializer arch/m68k/atari/stram.c:46: warning: (near initialization for ‘stram_pool’) arch/m68k/atari/stram.c: In function ‘atari_stram_reserve_pages’: arch/m68k/atari/stram.c:97: error: invalid use of undefined type ‘struct resource’ ... Signed-off-by: Geert Uytterhoeven <[email protected]>
2014-05-26m68k/atari - stram: alloc ST-RAM pool even if kernel not in ST-RAMMichael Schmitz1-17/+54
With the kernel loaded to FastRAM (TT-RAM), none of the ST-RAM address range is mapped by init_mem, and ST-RAM is not accessible through the normal allocation pathways as a result. Implement ST-RAM pool allocation to be based on physical addresses always (it already was when the kernel was loaded in ST-RAM). Return kernel virtual addresses as per normal. The current test for the kernel residing in ST-RAM always returns true. Use the bootinfo memory chunk order instead - with the kernel in FastRAM, ST-RAM (phys. 0x0) is not the first chunk. In case the kernel is running from FastRAM, delay mapping of ST-RAM pool until after mem_init. Provide helper functions for those users of ST-RAM that need to be aware of the backing physical addresses. Kudos to Geert for his hints on getting this started. Signed-off-by: Michael Schmitz <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2014-03-20m68k: atari: Fix the last kernel_stat.h falloutThomas Gleixner1-0/+1
Reported-by: Ingo Molnar <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]>
2014-01-13m68k/irq - Use polled IRQ flag for MFP timer cascaded interruptsMichael Schmitz1-0/+3
Some Atari hardware has no capacity to raise interrupts (e.g. network or USB adapter hardware attached via ROM port). The driver interrupt routine is called from a timer interrupt (timer D) in these cases, using chained device specific pseudo interrupts (IRQ_MFP_TIMER1 ff.) These interrupts will more often than not, return IRQ_NONE as there is not always work for the device handler when called. Too many unhandled interrupts will result in the interrupt being disabled by the stuck interrupt watchdog. As preferred option to flag interrupts as needing exclusion from the watchdog mechanism, tglx added the IRQ_IS_POLLED flag for use in such a case. Currently, two interrupts need to use this flag. Add more users as needed. Signed-off-by: Michael Schmitz <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]>
2013-12-08m68k/amiga,atari: Fix specifying multiple debug= parametersGeert Uytterhoeven1-1/+4
Since commit d6713b4091a99fa2af2fabdcd2f3fb97f32ecf2e ("m68k: early parameter support"), the user can specify multiple debug consoles using the "debug=" kernel command line parameter. However, as there's only a single struct console object, which is reused, it would actually register the same console object multiple times, causing the following warning: WARNING: CPU: 0 PID: 0 at kernel/printk/printk.c:2233 register_console+0x36/ console 'debug0' already registered Make sure to register the console object only once, to avoid the warning. Note that still only one console (the one corresponding to the last "debug=" parameter) will be active at the same time, as the .write() method of the already registered console object is overwritten by a subsequent "debug=" parameter. Signed-off-by: Geert Uytterhoeven <[email protected]>
2013-11-26m68k/UAPI: Use proper types (endianness/size) in <asm/bootinfo*.h>Geert Uytterhoeven1-4/+5
Signed-off-by: Geert Uytterhoeven <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.