aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring2644-1761/+2051
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-21kbuild: Support flat DTBs installRob Herring1-0/+3
In preparation to move Arm .dts files into sub-directories grouped by vendor/family, the current flat tree of DTBs generated by dtbs_install needs to be maintained. Moving the installed DTBs to sub-directories would break various consumers using 'make dtbs_install'. This is a NOP until sub-directories are introduced. Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-21ARM: dts: Add .dts files missing from the buildRob Herring1-0/+8
Comparing .dts files to built .dtb files yielded a few .dts files which are never built. Add them to the build. Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-21ARM: dts: allwinner: Use quoted #includeRob Herring1-1/+1
In preparation to move .dts files into subdirectories, include sunxi-h3-h5-emlid-neutis.dtsi from the current directory rather than the symlinked include path. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-20Merge tag 'arm-soc/for-6.5/devicetree' of ↵Arnd Bergmann39-687/+734
https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 6.5, please pull the following: - Krzysztof adds missing cache properties for the BCM63xx DSL routers - Rafal relicenses a number of the BCM5301X DTS files to the GPL 2.0+ / MIT license, and he fixes a number of Device Tree nodes warnings, adds MAC address for all Luxul routers and adds Netgear R8000 Wi-Fi regulatory information to the DTS - Stanislav updates the "BCM mobile" SoCs DTS files to fix various warnings - Aurelien enables the BCM283x DTS files to be built with relocation information to make them usable with DT overlays - Christian fixes the Meraki DTS to have correct NAND ECC properties, correct partition numbers and fixed-link node(s) properties * tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux: (33 commits) ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings dt-bindings: net: wireless: brcm,bcm4329-fmac: allow generic properties dt-bindings: net: wireless: brcm,bcm4329-fmac: add BCM4366 binding ARM: dts: BCM5301X: fix duplex-full => full-duplex ARM: dts: BCM5301X: MR32: remove partition index numbers ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo property dt-bindings: power: reset: bcm21664-resetmgr: convert to YAML ARM: dts: bcm21664-garnet: use node labels ARM: dts: bcm11351/21664: add UART, I2C node labels ARM: dts: bcm-mobile: move status properties to the end of nodes ARM: dts: bcm21664/23550: use CCU compatibles directly ARM: dts: bcm-mobile: change "" includes to <> where applicable ARM: dts: BCM5301X: Describe switch ports in the main DTS ARM: dts: BCM5301X: Relicense Christian's code to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32 keys ARM: dts: BCM5301X: Drop invalid #usb-cells dt-bindings: arm: bcm: Add bindings for Buffalo WZR-1166DHP(2) ARM: dts: BCM5301X: Use updated "spi-gpio" binding properties ... Link: https://lore.kernel.org/r/20230619134920.3384844-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20arm: dts: Enable device-tree overlay support for AT91 boardsCristian Birsan1-0/+14
Add the '-@' DTC option for AT91 boards that have device-tree overlays. This option populates the '__symbols__' node that contains all the necessary symbols for supporting device-tree overlays (from bootloader) on these devices. This change increases the size of the resulting DTB with ~30%-40%. Below are the measurements performed v6.4-rc6: at91-sam9x60_curiosity.dtb 28499 -> 36641 bytes at91-sam9x60ek.dtb 30867 -> 39609 bytes at91-sama5d27_som1_ek.dtb 26086 -> 34166 bytes at91-sama5d27_wlsom1_ek.dtb 26045 -> 33184 bytes at91-sama5d2_icp.dtb 27521 -> 36155 bytes at91-sama5d2_ptc_ek.dtb 23237 -> 29612 bytes at91-sama5d2_xplained.dtb 27262 -> 35326 bytes at91-sama5d3_eds.dtb 27924 -> 39939 bytes at91-sama5d3_xplained.dtb 28400 -> 40650 bytes at91-sama5d4_xplained.dtb 26456 -> 36107 bytes at91-sama7g5ek.dtb 29212 -> 37289 bytes Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Link: https://lore.kernel.org/r/20230616152932.1484154-1-cristian.birsan@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'mvebu-dt-6.5-1' of ↵Arnd Bergmann5-10/+221
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt for 6.5 (part 1) Add Endian 4i Edge 200 board (kirkwood based) Add missing phy-modes on Armada 388 clearfog board Replace deprecated spi-gpio properties on Armada XP Align MTD partition nodes to dtschema for all mvebu boards * tag 'mvebu-dt-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: mvebu: align MTD partition nodes to dtschema ARM: dts: armada-xp: Replace deprecated spi-gpio properties ARM: dts: armada388-clearfog: add missing phy-modes ARM: dts: kirkwood: Add Endian 4i Edge 200 board Link: https://lore.kernel.org/r/87a5wzh8b1.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'ti-keystone-dt-for-v6.5' of ↵Arnd Bergmann9-64/+64
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt Keystone2 device tree updates for v6.5 Cosmetic cleanups: * Do not capitalize hex digits * Unify pinctrl-single pin group nodes for keystone * Fix eeprom node names * tag 'ti-keystone-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: ARM: dts: keystone: Do not capitalize hex digits ARM: dts: keystone: Remove ti,keystone from soc node compatible ARM: dts: keystone: Fix EEPROM node names ARM: dts: Unify pinctrl-single pin group nodes for keystone Link: https://lore.kernel.org/r/20230615164127.qcgwrbwpmclx5wlm@landscape Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'qcom-dts-for-6.5-2' of ↵Arnd Bergmann14-61/+776
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt More Qualcomm ARM32 DeviceTree updates for v6.5 On MSM8960, support for USB is added and the Samsung Galaxy Express is added. GPIO keys and on-board LEDs are described for the APQ8074 Dragonboard. On MSM8226, QFPROM, tsens and thermal zones are defined, and the description of the clock hierarchy is improved. The PCIe endpoint controller on SDX55 gains a interconnect path to DDR defined. Sony Xperia X2 Tablet and Samsung Galaxy Tab 4 are updated following changes in the LP855X DeviceTree binding. * tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm: dts: qcom: sdx55: Add interconnect path ARM: dts: qcom: msm8226: Add thermal zones node ARM: dts: qcom: msm8226: Add tsens node and related nvmem cells ARM: dts: qcom: msm8226: Add qfprom node ARM: dts: qcom: pm8941: Add thermal zone config ARM: dts: qcom: pm8841: Add thermal zone config ARM: dts: qcom: pm8226: Add thermal sensor and thermal zone config ARM: dts: qcom: msm8974: rename labels for DSI nodes ARM: dts: qcom: apq8074-dragonboard: add gpio keys ARM: dts: qcom: apq8074-dragonboard: add onboard leds ARM: dts: qcom: Add Samsung Galaxy Express support ARM: dts: qcom: msm8960: Add USB node ARM: dts: qcom: adapt to LP855X bindings changes ARM: dts: qcom: msm8226: Provide clocks to mmcc node ARM: dts: qcom: msm8226: Use XO from rpmcc where possible Link: https://lore.kernel.org/r/20230615163926.1462225-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'v6.4-next-dts32' of ↵Arnd Bergmann6-162/+207
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt MT7530 (e.g. BPI R2): - several DT clean-ups - add port5 as CPU port * tag 'v6.4-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mt7623: add port@5 as CPU port arm: dts: mt7623: enable flow control on port@6 arm: dts: mt7623: change mt7530 switch address arm: dts: mt7623: add mt7530 switch to mt7623a.dtsi arm: dts: mt7623: add gmacs to mt7623.dtsi Link: https://lore.kernel.org/r/98e21acb-d792-6a8c-2de6-12d5af8a8111@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'qcom-dts-for-6.5' of ↵Arnd Bergmann17-89/+381
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM32 DeviceTree updates for v6.5 NAND support on IPQ4019 boards is restored, after a faulty node rename. On MSM8226 IMEM, PMU and RPM stats are introduced. The Huawei Watch gains vibrator support. On MSM8974, the LGE Nexus 5 gains vibrator support. The APQ8074 Dragonboard marks BLSP2 BAM controlled remotely, DSI panel, audio and modem DSPs are enabled. On SDX65 PCIe controller and PHY are introduced, to provide endpoint functionality. This is enabled on the related MTP. A range of DeviceTree cleanups are also included. * tag 'qcom-dts-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits) ARM: dts: qcom: apq8074-dragonboard: enable DSI panel ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS ARM: dts: qcom: apq8074-dragonboard: Set DMA as remotely controlled ARM: dts: qcom: apq8026-huawei-sturgeon: Add vibrator ARM: dts: qcom: msm8226: Add IMEM node ARM: dts: qcom: msm8226: Add rpm-stats device node ARM: dts: qcom: msm8226: Add PMU node ARM: dts: qcom: sdx65-mtp: Enable PCIe EP ARM: dts: qcom: sdx65-mtp: Enable PCIe PHY ARM: dts: qcom: sdx65: Add support for PCIe EP ARM: dts: qcom: sdx65: Add support for PCIe PHY ARM: dts: qcom: msm8974: align WCNSS Bluetooth node name with bindings ARM: dts: qcom: apq8084: correct thermal sensor unit-address ARM: dts: qcom: msm8960-cdp: move regulator out of simple-bus ARM: dts: qcom: apq8060-dragonboard: move regulators out of simple-bus ARM: dts: qcom: ipq8064: align USB node names with bindings ARM: dts: qcom: ipq8064: correct LED node names ARM: dts: qcom: ipq8064: drop invalid GCC thermal-sensor unit-address ARM: dts: qcom: ipq8064: drop leading 0 from unit-address ARM: dts: qcom: msm8974: correct pronto unit-address ... Link: https://lore.kernel.org/r/20230611010843.2482142-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'imx-dt-6.5' of ↵Arnd Bergmann87-143/+899
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree for 6.5: - New board support: Marantec Maveo Box. - Add HDMI support for TQMa6x/MBa6 board. - A series from Andrew Lunn to add phy-mode and fixed links for Ethernet devices on imx51, imx6qdl and vf610. - A bunch of changes from Fabio Estevam to clean up deprecated and invalid properies, fix up node names to remove dt-schema warnings. - A series of maintenance updates for Protonic Holland boards, mostly on the USB subsystem configuration, thermal zones, and the naming of GPIO keys. - Update dma-apbh device node name to remove dtbs_check warnings. - Remove invalid nodes from fan-controller for a couple of Gateworks boards. - Small random updates and clean-ups on various boards. * tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits) ARM: dts: imx6qdl: vicut1: rename power to power-button ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG port ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port ARM: dts: imx6dl: prtmvt: fix different USB related warnings ARM: dts: imx6dl: alti6p: fix different USB related warnings ARM: dts: imx6dl: vicut1: Address USB related warnings ARM: dts: imx6dl: Add trip points to thermal zones on several devices ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65 ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97 ARM: dts: imx: Use 'eeprom' as node name ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name ARM: dts: imx: Use 'pmic' as node name ARM: dts: imx6: Use the mux- prefix ARM: dts: imx7d-sdb: Allow UHS modes ... Link: https://lore.kernel.org/r/20230610072530.418847-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'sunxi-dt-for-6.5-1' of ↵Arnd Bergmann9-4/+226
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - fix DCLK clock names - new board ICnova A20 ADB4006 - add D1 SPI node - add bluetooth node for chip board - add extra mmc2 pinmux to sun5i - add axp209 iio-hwmon node * tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: axp209: Add iio-hwmon node for internal temperature ARM: dts: sun5i: Add port E pinmux settings for mmc2 ARM: dts: sun5i: chip: Enable bluetooth riscv: dts: allwinner: d1: Add SPI controllers node arm: dts: sunxi: Add ICnova A20 ADB4006 board dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding ARM: dts: sunxi: rename tcon's clock output Link: https://lore.kernel.org/r/20230609210452.GA17638@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-20Merge tag 'stm32-dt-for-v6.5-1' of ↵Arnd Bergmann29-102/+1106
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.5, round 1 Highlights: ---------- - MCU/MPU: - Replace deprecated st,hw-flow-ctrl by uart-has-rtscts. - Fix LTDC/DSI warnings. - MPU: - STMP32MP15: - Add OTP part number and Vrefint calibration in bsec. - M4 hold management updated. As SMC call is deprecated, the service is moved on a SCMI service. - Add ADC internal channels (VREFINT/VDDCORE). - ST: - Enable ADC1&2 on STM32MP15 DKx boards. - Adopt generic IIO bindings on STM32MP157C ED1 - Add supplies for OV5640 in STM32MP157C EV1 to fix yaml validation. - Fix i2s bindings to match with the YAML validation (DKx boards). - DH: - Rearrange MAC EEPROM. - Rename AV96 sound card. - Adopt generic IIo bindings. - Fix audio routing. -PHYTEC: - Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM. This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC, up to 16 MB QSPI and up to 128 GB NAND flash. * tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits) ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1 ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1 ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards ARM: dts: stm32: add vrefint support to adc2 on stm32mp15 ARM: dts: stm32: add vrefint calibration on stm32mp15 ARM: dts: stm32: add adc internal channels to stm32mp15 ARM: dts: stm32: fix ltdc warnings in stm32mp15 boards ARM: dts: stm32: fix dsi warnings on stm32mp15 boards dt-bindings: display: st,stm32-dsi: Remove unnecessary fields ARM: dts: stm32: fix warnings on stm32f469-disco board ARM: dts: stm32: Shorten the AV96 HDMI sound card name ARM: dts: stm32: fix m4_rproc references to use SCMI for stm32mp15 ARM: dts: stm32: Update Cortex-M4 reset declarations on stm32mp15 ARM: dts: stm32: add STM32MP1-based Phytec board ... Link: https://lore.kernel.org/r/08d711de-bb6d-a976-735b-5e18b19818ea@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-19ARM: dts: BCM5301X: Add cells sizes to PCIe nodesRafał Miłecki1-0/+9
This fixes: arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#address-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#size-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#address-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#size-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#address-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#size-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml Two properties that need to be added later are "device_type" and "ranges". Adding "device_type" on its own causes a new warning and the value of "ranges" needs to be determined yet. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20230616105827.21656-1-zajec5@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2023-06-16ARM: dts: mvebu: align MTD partition nodes to dtschemaChris Packham1-7/+7
Update the node names for the SPI NOR and NAND partitions to conform to the partition properties in the relevant dtschema. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-06-14arm: dts: qcom: sdx55: Add interconnect pathKrishna chaitanya chundru1-0/+4
Add pcie-mem interconnect path to sdx55 target. Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1686752666-13426-3-git-send-email-quic_krichai@quicinc.com
2023-06-13ARM: dts: qcom: msm8226: Add thermal zones nodeMatti Lehtimäki1-0/+44
Add thermal zones present on MSM8226 SoC. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230507201225.89694-7-matti.lehtimaki@gmail.com
2023-06-13ARM: dts: qcom: msm8226: Add tsens node and related nvmem cellsMatti Lehtimäki1-0/+113
Specify pre-parsed per-sensor calibration nvmem cells in the qfprom device node rather than parsing the whole data blob in the driver. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230507201225.89694-6-matti.lehtimaki@gmail.com
2023-06-13ARM: dts: qcom: msm8226: Add qfprom nodeMatti Lehtimäki1-0/+7
Add missing QFPROM definition for MSM8226 SoC. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230507201225.89694-5-matti.lehtimaki@gmail.com
2023-06-13ARM: dts: qcom: pm8941: Add thermal zone configMatti Lehtimäki1-0/+31
Add thermal zone for the PMIC thermal sensor. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230529221501.43455-4-matti.lehtimaki@gmail.com
2023-06-13ARM: dts: qcom: pm8841: Add thermal zone configMatti Lehtimäki1-1/+32
Add thermal zone for the PMIC thermal sensor. Temperatures are based on downstream values, except for critical trip point where 140°C is used instead of 145°C due to limitations without a configured ADC. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230529221501.43455-3-matti.lehtimaki@gmail.com
2023-06-13ARM: dts: qcom: pm8226: Add thermal sensor and thermal zone configMatti Lehtimäki1-0/+39
Add thermal sensor, which is using on chip VADC channel to report PMIC die temperature. Also add the corresponding thermal zone. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230529221501.43455-2-matti.lehtimaki@gmail.com
2023-06-13ARM: dts: qcom: msm8974: rename labels for DSI nodesDmitry Baryshkov4-42/+50
Currently in board files MDSS and HDMI nodes stay apart, because labels for HDMI nodes do not have the mdss_ prefix. It was found that grouping all display-related notes is more useful. To keep all display-related nodes close in the board files, change DSI node aliases from dsi_* to mdss_dsi_*. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230531011623.3808538-15-dmitry.baryshkov@linaro.org
2023-06-13ARM: dts: qcom: apq8074-dragonboard: add gpio keysDmitry Baryshkov1-0/+34
Add device nodes for gpio-keys (volume-up, general key) device nodes. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230531012627.3813060-3-dmitry.baryshkov@linaro.org
2023-06-13ARM: dts: qcom: apq8074-dragonboard: add onboard ledsDmitry Baryshkov1-0/+24
The dragonboard as three LEDs: red, green and blue. Add corresponding description. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230531012627.3813060-2-dmitry.baryshkov@linaro.org
2023-06-13ARM: dts: qcom: Add Samsung Galaxy Express supportRudraksha Gupta2-0/+332
Add a very basic device tree file for the Samsung Galaxy Express SGH-I437. Currently, the following things work: UART, eMMC, SD Card, and USB. Signed-off-by: Rudraksha Gupta <guptarud@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230607050025.86636-5-guptarud@gmail.com
2023-06-13ARM: dts: qcom: msm8960: Add USB nodeRudraksha Gupta1-1/+33
Add the required nodes to support USB on the MSM8960 SoC. As it's very similar to the APQ8064 SoC, the nodes are almost identical Add a label to sleep_clk for the USB node to reference Signed-off-by: Rudraksha Gupta <guptarud@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230607050025.86636-4-guptarud@gmail.com
2023-06-13ARM: dts: qcom: adapt to LP855X bindings changesArtur Weber2-12/+12
Change underscores in ROM node names to dashes, and remove deprecated pwm-period property. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230519180728.2281-4-aweber.kernel@gmail.com
2023-06-13ARM: dts: qcom: msm8226: Provide clocks to mmcc nodeLuca Weiss1-0/+15
The mmcc needs several clocks that are being used as parents. Provide them in dt. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230509-msm8226-mmcc-parents-v1-3-83a2dfc986ab@z3ntu.xyz
2023-06-13ARM: dts: qcom: msm8226: Use XO from rpmcc where possibleLuca Weiss1-5/+6
The xo clock being used everywhere actually goes via the RPM. Since the rpmcc driver recently got support for this clock we can use this now. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230509-msm8226-mmcc-parents-v1-1-83a2dfc986ab@z3ntu.xyz
2023-06-09arm: dts: mt7623: add port@5 as CPU portArınç ÜNAL2-0/+48
On the MT7623AI SoC and Bananapi BPI-R2, port 5 of the MT7530 switch is connected to the second MAC of the SoC as a CPU port. Add the port and set up the second MAC on the bindings. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230210182505.24597-6-arinc.unal@arinc9.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-06-09arm: dts: mt7623: enable flow control on port@6Arınç ÜNAL2-0/+2
Flow control needs to be enabled on both sides to work. It is already enabled on gmac0, enable it on port@6 too. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230210182505.24597-5-arinc.unal@arinc9.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-06-09arm: dts: mt7623: change mt7530 switch addressArınç ÜNAL3-6/+6
In the case of muxing phy0 of the MT7530 switch, the switch and the phy will have the same address on the mdio bus, 0. This causes the ethernet driver to fail since devices on the mdio bus cannot share an address. Any address can be used for the switch, therefore, change the switch address to 0x1f. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230210182505.24597-4-arinc.unal@arinc9.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-06-09arm: dts: mt7623: add mt7530 switch to mt7623a.dtsiArınç ÜNAL3-130/+118
The MT7530 switch is included as a part of the multi-chip module on the MT7623AI SoC. Add it to mt7623a.dtsi and adjust DTs that call mt7623a.dtsi. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230210182505.24597-3-arinc.unal@arinc9.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-06-09arm: dts: mt7623: add gmacs to mt7623.dtsiArınç ÜNAL5-51/+58
There are two gigabit MACs on the MT7623AI and MT7623NI SoCs. Add them to mt7623.dtsi and adjust the DTs that call mt7623.dtsi. Now that there are labels for the MACs, remove them from under &eth on the DTs that call mt7623.dtsi. Remove the unnecessary mdio label from Bananapi BPI-R2. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230210182505.24597-2-arinc.unal@arinc9.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-06-09Merge tag 'renesas-dts-for-v6.5-tag2' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.5 (take two) - Add IOMMU support for PCIe devices on R-Car Gen3 and RZ/G2 SoCs, - Add HSCIF1 serial port support on Renesas ULCB boards equipped with the Shimafuji Kingfisher extension, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: ulcb-kf: Add HSCIF1 node arm64: dts: renesas: ulcb-kf: Remove flow control for SCIF1 ARM: dts: iwg20d-q7-common: Fix backlight pwm specifier arm64: dts: renesas: Add IOMMU related properties into PCIe host nodes Link: https://lore.kernel.org/r/cover.1686304614.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-09Merge tag 'amlogic-arm-dt-for-v6.5' of ↵Arnd Bergmann2-4/+4
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM DT changes for v6.5: - correct uart_B and uart_C clock references for meson8 & meson8b * tag 'amlogic-arm-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: dts: meson8: correct uart_B and uart_C clock references ARM: dts: meson8b: correct uart_B and uart_C clock references Link: https://lore.kernel.org/r/21b55df9-3eda-0a0f-cf76-79b1d7735314@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-09Merge tag 'hisi-arm32-dt-for-6.5' of https://github.com/hisilicon/linux-hisi ↵Arnd Bergmann2-69/+67
into soc/dt ARM: DT: HiSilicon ARM32 DT updates for v6.5 - Clean up the pinctrl-single node names and correct the pinctrl controller nodes of the hi3620 SoC * tag 'hisi-arm32-dt-for-6.5' of https://github.com/hisilicon/linux-hisi: ARM: dts: hisilicon: Unify pinctrl-single pin group nodes Link: https://lore.kernel.org/r/6482C732.3060300@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-09Merge tag 'zynq-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx into soc/dtArnd Bergmann2-1/+20
ARM: Zynq DT changes for v6.5 - Setup 400k as default i2c frequency - Wire i2c recovery via gpio on zc702 * tag 'zynq-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: dts: Add SCL & SDA GPIO entries for recovery ARM: zynq: dts: Setting default i2c clock frequency to 400kHz Link: https://lore.kernel.org/r/c5c99ba2-f004-306c-6251-551826f90df8@amd.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-09Merge tag 'omap-for-v6.5/dt-pin-nodes-signed' of ↵Arnd Bergmann156-1096/+1098
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt Clean-up for pinctrl-single node names for omaps for v6.5 To avoid producing lots of make dtbs checks warnings when the yaml binding for pinctrl-single gets merged, let's fix up the pin group node names. We want to do this rather than add non-standard node name workarounds to the yaml binding. Also included is a non-urgent fix to move gta04 model name out of the pinmux node that can wait for the merge window. * tag 'omap-for-v6.5/dt-pin-nodes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Unify pinctrl-single pin group nodes for dra7 ARM: dts: Unify pinctrl-single pin group nodes for am4 ARM: dts: Unify pinctrl-single pin group nodes for am33xx ARM: dts: Unify pinctrl-single pin group nodes for ti81xx ARM: dts: Unify pinctrl-single pin group nodes for omap5 ARM: dts: Unify pinctrl-single pin group nodes for omap4 ARM: dts: Unify pinctrl-single pin group nodes for omap2 ARM: dts: Unify pinctrl-single pin group nodes for omap3 ARM: dts: gta04: Move model property out of pinctrl node Link: https://lore.kernel.org/r/pull-1685700720-242492@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-08ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappingsRafał Miłecki1-0/+17
This allows setting FullMAC firmware regulatory domain. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20230602135925.14143-3-zajec5@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2023-06-08ARM: dts: BCM5301X: fix duplex-full => full-duplexChristian Lamparter2-2/+2
this typo was found by the dtbs_check | ports:port@5:fixed-link: 'oneOf' conditional failed, | {'speed': [[1000]], 'duplex-full': True} is not of type 'array' | 'duplex-full' does not match any of the regexes: 'pinctrl-[0-]..." this should have been full-duplex; Fixes: 935327a73553 ("ARM: dts: BCM5301X: Add DT for Meraki MR26") Fixes: ec88a9c344d9 ("ARM: BCM5301X: Add DT for Meraki MR32") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Link: https://lore.kernel.org/r/50522f45566951a9eabd22820647924cc6b4a264.1686238550.git.chunkeey@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2023-06-08ARM: dts: BCM5301X: MR32: remove partition index numbersChristian Lamparter1-5/+5
removes the partition indexes in the node names under. This brings the device tree source in line with others. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Link: https://lore.kernel.org/r/627f57d568030a56499361790524b4d4f3381619.1686238550.git.chunkeey@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2023-06-08ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo propertyChristian Lamparter2-4/+0
| bcm53015-meraki-mr26.dtb: nand-controller@18028000: | nand@0:nand-ecc-algo:0: 'hw' is not one of ['hamming', 'bch', 'rs'] | From schema: Documentation/[...]/nand-controller.yaml | bcm53016-meraki-mr32.dtb: nand-controller@18028000: | nand@0:nand-ecc-algo:0: 'hw' is not one of ['hamming', 'bch', 'rs'] | From schema: Documentation/[...]/nand-controller.yaml original ECC values for these old Merakis are sadly not provided by the vendor. It looks like Meraki just stuck with what Broadcom's SDK was doing... which left this up to the proprietary nand driver. Note: The invalid setting was and is handled by brcmnand. It falls back to "bch" in brcmnand_setup_dev() when ecc.algo is set to NAND_ECC_ALGO_UNKNOWN (since "hw" is not in the list above). A correct nand-ecc-algo = "bch"; is already specified in the included "bcm5301x-nand-cs0-bch8.dtsi". So this line can be dropped. Reported-by: Rafał Miłecki <zajec5@gmail.com> (per Mail) Fixes: 935327a73553 ("ARM: dts: BCM5301X: Add DT for Meraki MR26") Fixes: ec88a9c344d9 ("ARM: BCM5301X: Add DT for Meraki MR32") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Link: https://lore.kernel.org/r/2c4d00dd40124c2ddc0b139cbce7531b108f9052.1686238550.git.chunkeey@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2023-06-08ARM: dts: bcm21664-garnet: use node labelsStanislav Jakubek1-23/+23
Use node labels instead of nodename@address for BCM21664 Garnet to simplify its DTS file. Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> Link: https://lore.kernel.org/r/e9f1ac2e9aa0ef7e880b1c152cbd56ff6b151955.1685127525.git.stano.jakubek@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2023-06-08ARM: dts: bcm11351/21664: add UART, I2C node labelsStanislav Jakubek2-15/+15
Add node labels to serial (UART) and I2C nodes for BCM11351 and BCM21664. Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> Link: https://lore.kernel.org/r/4c8bb3a725dad9048665d39d0ca728b52152e59e.1685127525.git.stano.jakubek@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2023-06-08ARM: dts: bcm-mobile: move status properties to the end of nodesStanislav Jakubek4-14/+14
Move some DT "status" properties so that they're the last specified property (before sub-nodes). Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> Link: https://lore.kernel.org/r/d7060071cb1f4b36b06b6507a09b32c7751ca7f0.1685127525.git.stano.jakubek@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2023-06-08ARM: dts: bcm21664/23550: use CCU compatibles directlyStanislav Jakubek2-8/+8
BCM21664 and BCM23550 DTs for some reason use constants from a header file for their CCU node compatibles. Change these to use the strings directly. Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> Link: https://lore.kernel.org/r/65c54bd4076d646623d2a2f518631435522dc628.1685127525.git.stano.jakubek@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2023-06-08ARM: dts: bcm-mobile: change "" includes to <> where applicableStanislav Jakubek3-7/+4
While at it, also sort the includes alphabetically. Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> Link: https://lore.kernel.org/r/04aa10d644eb183f6c0c5b944e527e36d56e2110.1685127525.git.stano.jakubek@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Powered by cgit, Gruvboxed by Blaster4385.