Merge tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX ARM device tree for 6.5: - New board support: Marantec Maveo Box. - Add HDMI support for TQMa6x/MBa6 board. - A series from Andrew Lunn to add phy-mode and fixed links for Ethernet devices on imx51, imx6qdl and vf610. - A bunch of changes from Fabio Estevam to clean up deprecated and invalid properies, fix up node names to remove dt-schema warnings. - A series of maintenance updates for Protonic Holland boards, mostly on the USB subsystem configuration, thermal zones, and the naming of GPIO keys. - Update dma-apbh device node name to remove dtbs_check warnings. - Remove invalid nodes from fan-controller for a couple of Gateworks boards. - Small random updates and clean-ups on various boards. * tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits) ARM: dts: imx6qdl: vicut1: rename power to power-button ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG port ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port ARM: dts: imx6dl: prtmvt: fix different USB related warnings ARM: dts: imx6dl: alti6p: fix different USB related warnings ARM: dts: imx6dl: vicut1: Address USB related warnings ARM: dts: imx6dl: Add trip points to thermal zones on several devices ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65 ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97 ARM: dts: imx: Use 'eeprom' as node name ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name ARM: dts: imx: Use 'pmic' as node name ARM: dts: imx6: Use the mux- prefix ARM: dts: imx7d-sdb: Allow UHS modes ... Link: https://lore.kernel.org/r/20230610072530.418847-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
author: Arnd Bergmann <arnd@arndb.de> 2023-06-20 22:38:10 +0200
committer: Arnd Bergmann <arnd@arndb.de> 2023-06-20 22:38:10 +0200
commit: f50a4e594db87ad8beed9bb42a067224724d07de (patch)
tree: 0edb7fa01657712dfec9863582581db55eb788a4 /arch/arm
parent: 3230271930ad9fb8c82de7b0c5cc41c87da7bc15 (diff)
parent: 5ef0f31fb9285d72bbe3bfd80be34284d4b9c7dd (diff)
87 files changed, 899 insertions, 143 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6e430becee80..c5ca1846c4c8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -751,6 +751,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ull-dhcom-drc02.dtb \
 	imx6ull-dhcom-pdk2.dtb \
 	imx6ull-dhcom-picoitx.dtb \
+	imx6ull-dhcor-maveo-box.dtb \
 	imx6ull-jozacp.dtb \
 	imx6ull-kontron-bl.dtb \
 	imx6ull-myir-mys-6ulx-eval.dtb \
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index d19508c8f9ed..a3668a0827fc 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -59,7 +59,7 @@
 				reg = <0x80000000 0x2000>;
 			};
 
-			dma_apbh: dma-apbh@80004000 {
+			dma_apbh: dma-controller@80004000 {
 				compatible = "fsl,imx23-dma-apbh";
 				reg = <0x80004000 0x2000>;
 				interrupts = <0 14 20 0
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 94d6614c1983..c5a7f56d83db 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -100,9 +100,9 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_pins_cfa10049>;
 		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
+		sck-gpios = <&gpio2 16 0>;
+		mosi-gpios = <&gpio2 17 0>;
+		miso-gpios = <&gpio2 18 0>;
 		cs-gpios = <&gpio3 5 0>;
 		num-chipselects = <1>;
 		#address-cells = <1>;
@@ -124,8 +124,8 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi3_pins_cfa10049>;
 		status = "okay";
-		gpio-sck = <&gpio0 24 0>;
-		gpio-mosi = <&gpio0 28 0>;
+		sck-gpios = <&gpio0 24 0>;
+		mosi-gpios = <&gpio0 28 0>;
 		cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
 		num-chipselects = <3>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
index 42ba7da48beb..70e225a99fbe 100644
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -19,9 +19,9 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_pins_cfa10055>;
 		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
+		sck-gpios = <&gpio2 16 0>;
+		mosi-gpios = <&gpio2 17 0>;
+		miso-gpios = <&gpio2 18 0>;
 		cs-gpios = <&gpio3 5 0>;
 		num-chipselects = <1>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
index 0e15bdfd7281..bc2d6fcad12f 100644
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -18,9 +18,9 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_pins_cfa10056>;
 		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
+		sck-gpios = <&gpio2 16 0>;
+		mosi-gpios = <&gpio2 17 0>;
+		miso-gpios = <&gpio2 18 0>;
 		cs-gpios = <&gpio3 5 0>;
 		num-chipselects = <1>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index ffe58c7093e1..23ad7cd0a1de 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -192,9 +192,9 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_spi_gpio_pins>;
 
-		gpio-sck = <&gpio2 24 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio2 25 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <3>;
 		cs-gpios = <
 			&gpio2 27 GPIO_ACTIVE_LOW
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index a8d3c3113e0f..29e37b1fae66 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -78,7 +78,7 @@
 				status = "disabled";
 			};
 
-			dma_apbh: dma-apbh@80004000 {
+			dma_apbh: dma-controller@80004000 {
 				compatible = "fsl,imx28-dma-apbh";
 				reg = <0x80004000 0x2000>;
 				interrupts = <82 83 84 85
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index d650f54c3fc6..2d20e5541acc 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -298,7 +298,6 @@
 				compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
 				reg = <0x53fdc000 0x4000>;
 				clocks = <&clks 74>;
-				clock-names = "";
 				interrupts = <55>;
 			};
 
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index e537e06e11d7..5d4b29d76585 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -145,9 +145,9 @@
 		pinctrl-0 = <&pinctrl_gpiospi0>;
 		status = "okay";
 
-		gpio-sck = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio4 12 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 		cs-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
 
@@ -181,7 +181,7 @@
 
 				port@0 {
 					reg = <0>;
-					label = "cpu";
+					phy-mode = "rev-mii";
 					ethernet = <&fec>;
 
 					fixed-link {
diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
index 21dd3f7abd48..625f9ac671ae 100644
--- a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
+++ b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
@@ -82,7 +82,7 @@
 
 				port@4 {
 					reg = <4>;
-					label = "cpu";
+					phy-mode = "rev-mii";
 					ethernet = <&fec>;
 
 					fixed-link {
diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
index 9f857eb44bf7..19a3b142c964 100644
--- a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
+++ b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
@@ -267,7 +267,6 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
 					phy-mode = "mii";
 					ethernet = <&fec>;
 
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index 7e7f9f3b3906..d930739674a1 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -274,7 +274,7 @@
 		reg = <0x48>;
 	};
 
-	eeprom: 24c64@50 {
+	eeprom: eeprom@50 {
 		compatible = "atmel,24c64";
 		pagesize = <32>;
 		reg = <0x50>;
diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts
index e6a4e2770640..4989e8d069a1 100644
--- a/arch/arm/boot/dts/imx6dl-alti6p.dts
+++ b/arch/arm/boot/dts/imx6dl-alti6p.dts
@@ -361,6 +361,7 @@
 	pinctrl-0 = <&pinctrl_usbh1>;
 	phy_type = "utmi";
 	dr_mode = "host";
+	over-current-active-low;
 	status = "okay";
 };
 
@@ -370,9 +371,18 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
+	over-current-active-low;
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/imx6dl-lanmcu.dts
index fa823988312d..7c62db91173b 100644
--- a/arch/arm/boot/dts/imx6dl-lanmcu.dts
+++ b/arch/arm/boot/dts/imx6dl-lanmcu.dts
@@ -257,9 +257,18 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
+	over-current-active-low;
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts
index e98046eea7a4..84f34da06267 100644
--- a/arch/arm/boot/dts/imx6dl-plybas.dts
+++ b/arch/arm/boot/dts/imx6dl-plybas.dts
@@ -235,7 +235,7 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
-	disable-over-current;
+	over-current-active-low;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
index e3c10483f33b..dfa8110b1d97 100644
--- a/arch/arm/boot/dts/imx6dl-plym2m.dts
+++ b/arch/arm/boot/dts/imx6dl-plym2m.dts
@@ -113,18 +113,42 @@
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal0 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal1 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts
index 5f4fa796ca18..773a84a5739d 100644
--- a/arch/arm/boot/dts/imx6dl-prtmvt.dts
+++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts
@@ -560,6 +560,7 @@
 	pinctrl-names = "default";
 	phy_type = "utmi";
 	dr_mode = "host";
+	disable-over-current;
 	status = "okay";
 };
 
@@ -569,10 +570,18 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
-	disable-over-current;
+	over-current-active-low;
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts
index 56bb1ca56a2d..36b031236e47 100644
--- a/arch/arm/boot/dts/imx6dl-prtrvt.dts
+++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts
@@ -124,6 +124,10 @@
 	status = "disabled";
 };
 
+&usbotg {
+	disable-over-current;
+};
+
 &vpu {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index a1eb53851794..568e98cb62aa 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -24,7 +24,7 @@
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 500000 0>;
 		brightness-levels = <0 20 81 248 1000>;
-		default-brightness-level = <20>;
+		default-brightness-level = <65>;
 		num-interpolated-steps = <21>;
 		power-supply = <&reg_bl_12v0>;
 	};
@@ -246,18 +246,42 @@
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal0 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal1 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 	};
 
@@ -267,8 +291,6 @@
                               <&adc_ts 5>;
 		io-channel-names = "y", "z1", "z2", "x";
 		touchscreen-min-pressure = <64687>;
-		touchscreen-inverted-x;
-		touchscreen-inverted-y;
 		touchscreen-x-plate-ohms = <300>;
 		touchscreen-y-plate-ohms = <800>;
 	};
diff --git a/arch/arm/boot/dts/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/imx6dl-qmx6.dtsi
index 150d69858255..05fd8ff4da1e 100644
--- a/arch/arm/boot/dts/imx6dl-qmx6.dtsi
+++ b/arch/arm/boot/dts/imx6dl-qmx6.dtsi
@@ -48,7 +48,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_audmux>;
 
-	audmux_ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -60,7 +60,7 @@
 		>;
 	};
 
-	audmux_aud6 {
+	mux-aud6 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT6>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 24c7f535f63b..0366d1037ef4 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -177,7 +177,7 @@
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	pmic: pf0100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
index 23274be08e61..4875afadb630 100644
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ b/arch/arm/boot/dts/imx6dl-victgo.dts
@@ -74,18 +74,42 @@
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal0 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal1 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index 1ad41c944b4b..ffb3b8eeae5d 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -141,7 +141,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_RCLKDIR |
@@ -152,7 +152,7 @@
 		>;
 	};
 
-	audmux4 {
+	mux-audmux4 {
 		fsl,audmux-port = <3>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi
index fef5d7254536..4ab31f2217cd 100644
--- a/arch/arm/boot/dts/imx6q-display5.dtsi
+++ b/arch/arm/boot/dts/imx6q-display5.dtsi
@@ -147,7 +147,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -159,7 +159,7 @@
 		>;
 	};
 
-	aud6 {
+	mux-aud6 {
 		fsl,audmux-port = <5>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_RFSEL(8) |
@@ -276,7 +276,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c256";
 		pagesize = <64>;
 		reg = <0x50>;
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 9591848cbd37..3815cb660ff7 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -134,7 +134,7 @@
 		     &pinctrl_pfuze>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 		interrupt-parent = <&gpio3>;
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 522a51042965..0ba802b891b5 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -206,7 +206,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
index 6406ade14f57..3fe4591e21f5 100644
--- a/arch/arm/boot/dts/imx6q-h100.dts
+++ b/arch/arm/boot/dts/imx6q-h100.dts
@@ -166,7 +166,7 @@
 	pinctrl-0 = <&pinctrl_h100_i2c1>;
 	status = "okay";
 
-	eeprom: 24c02@51 {
+	eeprom: eeprom@51 {
 		compatible = "microchip,24c02", "atmel,24c02";
 		reg = <0x51>;
 	};
diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi
index 5e0ed5560040..091903f53a56 100644
--- a/arch/arm/boot/dts/imx6q-kp.dtsi
+++ b/arch/arm/boot/dts/imx6q-kp.dtsi
@@ -135,7 +135,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -147,7 +147,7 @@
 		>;
 	};
 
-	aud3 {
+	mux-aud3 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index ee8c0bd3ecfd..a7d5a68110fc 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -308,7 +308,7 @@
 	pinctrl-0 = <&pinctrl_i2c2_novena>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts
index bad8d831e64e..109b46a22b5e 100644
--- a/arch/arm/boot/dts/imx6q-pistachio.dts
+++ b/arch/arm/boot/dts/imx6q-pistachio.dts
@@ -208,7 +208,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts
index 54a57a4548e2..792b8903d345 100644
--- a/arch/arm/boot/dts/imx6q-prtwd2.dts
+++ b/arch/arm/boot/dts/imx6q-prtwd2.dts
@@ -156,9 +156,6 @@
 			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
 			/* nINTRP */
 			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
-
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 4e20cb97058e..a642be45ffe2 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -187,7 +187,7 @@
 	pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -199,7 +199,7 @@
 		>;
 	};
 
-	aud5 {
+	mux-aud5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -349,8 +349,6 @@
 
 		fan-controller@2c {
 			compatible = "gw,gsc-fan";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0x2c>;
 		};
 	};
@@ -400,7 +398,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 0fa4b8eeddee..29960d1cf6a0 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -171,7 +171,7 @@
 	pinctrl-0 = <&pinctrl_audmux>; /* AUD5<->tda1997x */
 	status = "okay";
 
-	ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -183,7 +183,7 @@
 		>;
 	};
 
-	aud5 {
+	mux-aud5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 9fc79af2bc9a..9594bc5745ed 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -238,8 +238,13 @@
 
 				port@5 {
 					reg = <5>;
-					label = "cpu";
 					ethernet = <&fec>;
+					phy-mode = "rgmii-id";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
index 40e235e315cc..de5983cf7810 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -243,8 +243,6 @@
 
 		fan-controller@a {
 			compatible = "gw,gsc-fan";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0x0a>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 2ffb21dd89f2..bfade7149080 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -147,7 +147,7 @@
 &audmux {
 	status = "okay";
 
-	ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -159,7 +159,7 @@
 		>;
 	};
 
-	pins5 {
+	mux-pins5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
index eb1ad28946d3..0883ef99cded 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
@@ -179,7 +179,7 @@
 &audmux {
 	status = "okay";
 
-	ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -191,7 +191,7 @@
 		>;
 	};
 
-	pins5 {
+	mux-pins5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index a4217f564a53..d339957cc097 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -118,7 +118,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	audmux_ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -130,7 +130,7 @@
 		>;
 	};
 
-	audmux_aud4 {
+	mux-aud4 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -262,7 +262,7 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	vmcc-supply = <&reg_sd3_vmmc>;
+	vmmc-supply = <&reg_sd3_vmmc>;
 	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	no-1-8-v;
@@ -274,7 +274,7 @@
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
-	vmcc-supply = <&reg_sd4_vmmc>;
+	vmmc-supply = <&reg_sd4_vmmc>;
 	bus-width = <8>;
 	no-1-8-v;
 	non-removable;
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 23c318d9636f..efe11524b885 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -109,7 +109,7 @@
 	status = "okay";
 
 
-	audmux_ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -121,7 +121,7 @@
 		>;
 	};
 
-	audmux_aud4 {
+	mux-aud4 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
index 78555a618851..212c623418fc 100644
--- a/arch/arm/boot/dts/imx6qdl-mba6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
@@ -129,7 +129,7 @@
 &audmux {
 	status = "okay";
 
-	ssi0 {
+	mux-ssi0 {
 		fsl,audmux-port = <MX31_AUDMUX_PORT1_SSI0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -141,7 +141,7 @@
 		>;
 	};
 
-	aud3 {
+	mux-aud3 {
 		fsl,audmux-port = <MX31_AUDMUX_PORT3_SSI_PINS_3>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -192,6 +192,13 @@
 	};
 };
 
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
 &i2c1 {
 	tlv320aic32x4: audio-codec@18 {
 		compatible = "ti,tlv320aic32x4";
@@ -205,6 +212,17 @@
 	};
 };
 
+/* DDC */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_recovery>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
@@ -271,6 +289,22 @@
 &usbh1 {
 	disable-over-current;
 	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet@1 {
+			compatible = "usb424,9e00";
+			reg = <1>;
+			nvmem-cells = <&mba_mac_address>;
+			nvmem-cell-names = "mac-address";
+		};
+	};
 };
 
 &usbotg {
@@ -395,6 +429,15 @@
 		>;
 	};
 
+	pinctrl_hdmi: hdmigrp {
+		/* NOTE: DDC is done via I2C2, so DON'T
+		 * configure DDC pins for HDMI!
+		 */
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
@@ -431,6 +474,20 @@
 		>;
 	};
 
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899
+		>;
+	};
+
+	pinctrl_i2c2_recovery: i2c2recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b899
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b899
+		>;
+	};
+
 	pinctrl_pcie: pciegrp {
 		fsl,pins = <
 			/* HYS = 1, DSE = 110, 100k up, SPEED = HIGH (11)*/
diff --git a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
index df8fa169e9f6..27fec340c380 100644
--- a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
@@ -21,6 +21,12 @@
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mba_mac_address: mac-address@20 {
+			reg = <0x20 0x6>;
+		};
 	};
 
 	rtc0: rtc@68 {
diff --git a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
index 7d1cd7454c7f..0a9f076eeb36 100644
--- a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
@@ -31,6 +31,12 @@
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mba_mac_address: mac-address@20 {
+			reg = <0x20 0x6>;
+		};
 	};
 
 	rtc0: rtc@68 {
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
index 51d28e275aa6..a41e47c06ef4 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
@@ -75,7 +75,7 @@
 &audmux {
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -87,7 +87,7 @@
 		>;
 	};
 
-	pins5 {
+	mux-pins5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
index f0db0d4471f4..36f84f4da6b0 100644
--- a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
@@ -69,6 +69,7 @@
 	vbus-supply = <&reg_usb_h1_vbus>;
 	phy_type = "utmi";
 	dr_mode = "host";
+	disable-over-current;
 	status = "okay";
 };
 
@@ -78,10 +79,18 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
-	disable-over-current;
+	over-current-active-low;
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index f79caa36f3d2..68e97180d33e 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -336,7 +336,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 53b080c97f2d..4fe58764b929 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -338,7 +338,7 @@
 		};
 	};
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index a197bac95cba..e2fe337f7d9e 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -216,7 +216,7 @@
 &audmux {
 	status = "okay";
 
-	ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -228,7 +228,7 @@
 		>;
 	};
 
-	pins5 {
+	mux-pins5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
index c41cac502bac..200559d7158d 100644
--- a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
@@ -39,7 +39,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -51,7 +51,7 @@
 		>;
 	};
 
-	aud3 {
+	mux-aud3 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi
index f505f2704530..73f381e14467 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi
@@ -10,7 +10,7 @@
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 		autorepeat;
 
-		power {
+		power-button {
 			label = "Power Button";
 			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index c4e6cf0527ba..96e4f4b0b248 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -169,6 +169,14 @@
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 	};
 };
@@ -393,8 +401,6 @@
 };
 
 &ssi1 {
-	#sound-dai-cells = <0>;
-	fsl,mode = "ac97-slave";
 	status = "okay";
 };
 
@@ -426,6 +432,7 @@
 	pinctrl-names = "default";
 	phy_type = "utmi";
 	dr_mode = "host";
+	disable-over-current;
 	status = "okay";
 };
 
@@ -439,6 +446,14 @@
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
index bf86b639fdac..9b8c9c23ab54 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
@@ -27,7 +27,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 5bb47c79a4da..9ff183e4e069 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -757,7 +757,7 @@
 
 				port@2 {
 					reg = <2>;
-					label = "cpu";
+					phy-mode = "rev-rmii";
 					ethernet = <&fec>;
 
 					fixed-link {
@@ -848,7 +848,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -860,7 +860,7 @@
 		>;
 	};
 
-	aud3 {
+	mux-aud3 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -868,7 +868,7 @@
 		>;
 	};
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -880,7 +880,7 @@
 		>;
 	};
 
-	aud5 {
+	mux-aud5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b72ec745f6d1..bda182edc589 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -150,7 +150,7 @@
 		interrupt-parent = <&gpc>;
 		ranges;
 
-		dma_apbh: dma-apbh@110000 {
+		dma_apbh: dma-controller@110000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x00110000 0x2000>;
 			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/imx6qp-prtwd3.dts
index cf6571cc4682..ae00d538a4df 100644
--- a/arch/arm/boot/dts/imx6qp-prtwd3.dts
+++ b/arch/arm/boot/dts/imx6qp-prtwd3.dts
@@ -350,7 +350,7 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
-	disable-over-current;
+	over-current-active-low;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index dc5d596c18db..239bc6dfc584 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -160,7 +160,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index 269092ac881c..e3e9b0ec4f73 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -109,6 +109,14 @@
 		enable-active-high;
 	};
 
+	reg_sd2_vmmc: regulator-sd2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "eMMC-VCCQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+	};
+
 	reg_sd3_vmmc: regulator-sd3-vmmc {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -343,6 +351,17 @@
 	status = "okay";
 };
 
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	vqmmc-supply = <&reg_sd2_vmmc>;
+	status = "okay";
+};
+
 &usbotg1 {
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	pinctrl-names = "default";
@@ -444,7 +463,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1grp-100mhz {
 		fsl,pins = <
 			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
 			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130b9
@@ -455,7 +474,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1grp-200mhz {
 		fsl,pins = <
 			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
 			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130f9
@@ -466,6 +485,54 @@
 		>;
 	};
 
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x17059
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x17059
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x17059
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x17059
+			MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x17059
+			MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x17059
+			MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x17059
+			MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x17059
+			MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x13059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170b9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170b9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170b9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170b9
+			MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170b9
+			MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170b9
+			MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170b9
+			MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170b9
+			MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x130b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170f9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170f9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170f9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170f9
+			MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170f9
+			MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170f9
+			MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170f9
+			MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170f9
+			MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x130f9
+		>;
+	};
+
 	pinctrl_usbotg1: usbotg1grp {
 		fsl,pins = <
 			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
@@ -484,7 +551,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
 		fsl,pins = <
 			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170a1
 			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130a1
@@ -496,7 +563,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
 		fsl,pins = <
 			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170e9
 			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130f9
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index 7dda42553f4b..48f19dede467 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -15,7 +15,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 969cfe920d25..e05a1be5553c 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -14,7 +14,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze200";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
index b9a1401e6c6d..bfcd8f7d86dd 100644
--- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
@@ -171,7 +171,7 @@
 		reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 	};
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze200";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 93ac2380ca1e..3a4308666552 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -209,7 +209,7 @@
 			power-domains = <&pd_pu>;
 		};
 
-		dma_apbh: dma-apbh@1804000 {
+		dma_apbh: dma-controller@1804000 {
 			compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -841,10 +841,40 @@
 				reg = <0x020e0000 0x4000>;
 			};
 
-			gpr: iomuxc-gpr@20e4000 {
+			gpr: syscon@20e4000 {
 				compatible = "fsl,imx6sx-iomuxc-gpr",
-					     "fsl,imx6q-iomuxc-gpr", "syscon";
+					     "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0x020e4000 0x4000>;
+
+				lvds_bridge: bridge@18 {
+					compatible = "fsl,imx6sx-ldb";
+					reg = <0x18 0x4>;
+					clocks = <&clks IMX6SX_CLK_LDB_DI0>;
+					clock-names = "ldb";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							ldb_from_lcdif1: endpoint {
+								remote-endpoint = <&lcdif1_to_ldb>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ldb_lvds_ch0: endpoint {
+							};
+						};
+					};
+				};
 			};
 
 			sdma: dma-controller@20ec000 {
@@ -1278,6 +1308,14 @@
 					clock-names = "pix", "axi", "disp_axi";
 					power-domains = <&pd_disp>;
 					status = "disabled";
+
+					ports {
+						port {
+							lcdif1_to_ldb: endpoint {
+								remote-endpoint = <&ldb_from_lcdif1>;
+							};
+						};
+					};
 				};
 
 				lcdif2: lcdif@2224000 {
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 7275a1366413..155515fe13fa 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -89,8 +89,8 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_spi4>;
 		status = "okay";
-		gpio-sck = <&gpio5 11 0>;
-		gpio-mosi = <&gpio5 10 0>;
+		sck-gpios = <&gpio5 11 0>;
+		mosi-gpios = <&gpio5 10 0>;
 		cs-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
index b5781c3656d1..7d1a391431bd 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
@@ -158,7 +158,7 @@
 				regulator-max-microvolt = <3300000>;
 			};
 
-			vcoin_chg: vcoin {
+			vcoin_chg: coin {
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <3300000>;
 			};
diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi
index 357ffb2f5ad6..4ffe99ed55ca 100644
--- a/arch/arm/boot/dts/imx6ul-pico.dtsi
+++ b/arch/arm/boot/dts/imx6ul-pico.dtsi
@@ -131,7 +131,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts
index b7c96fbe7a91..c3c50f51a5a8 100644
--- a/arch/arm/boot/dts/imx6ul-prti6g.dts
+++ b/arch/arm/boot/dts/imx6ul-prti6g.dts
@@ -177,6 +177,7 @@
 
 &usbotg1 {
 	dr_mode = "host";
+	over-current-active-low;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
index 70cef5e817bd..6bd90473050b 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
@@ -218,9 +218,9 @@
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_spi_gpio>;
-		gpio-mosi = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <2>;
 		cs-gpios = <
 			&gpio1 29 GPIO_ACTIVE_HIGH
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 3d9d0f823568..0174f3edbd16 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -164,7 +164,7 @@
 			      <0x00a06000 0x2000>;
 		};
 
-		dma_apbh: dma-apbh@1804000 {
+		dma_apbh: dma-controller@1804000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
 			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -719,6 +719,18 @@
 				#interrupt-cells = <3>;
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6UL_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+				};
 			};
 
 			iomuxc: pinctrl@20e0000 {
diff --git a/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi
index 17837663c0b0..830b5a5064f2 100644
--- a/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi
@@ -7,8 +7,6 @@
 
 / {
 	aliases {
-		/delete-property/ mmc0; /* Avoid double definitions */
-		/delete-property/ mmc1;
 		/delete-property/ spi2;
 		/delete-property/ spi3;
 		i2c0 = &i2c2;
diff --git a/arch/arm/boot/dts/imx6ull-dhcor-maveo-box.dts b/arch/arm/boot/dts/imx6ull-dhcor-maveo-box.dts
new file mode 100644
index 000000000000..047f7b2d8526
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-dhcor-maveo-box.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ * Copyright (C) 2023 Marantec electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCR-iMX6ULL-C080-R051-SPI-WBT-I-01LG
+ * DHCOR PCB number: 578-200 or newer
+ * maveo box PCB number: 525-200 or newer
+ */
+
+/dts-v1/;
+
+#include "imx6ull-dhcor-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOR on maveo box";
+	compatible = "marantec,imx6ull-dhcor-maveo-box", "dh,imx6ull-dhcor-som",
+		     "fsl,imx6ull";
+
+	aliases {
+		mmc2 = &usdhc2;
+		spi0 = &ecspi4;
+		spi3 = &ecspi1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg1-vbus";
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg2-vbus";
+	};
+
+	/* WiFi pin WL_REG_ON is connected to GPIO 5.9 */
+	usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* BT pin BT_REG_ON is connected to GPIO 1.18 */
+&bluetooth {
+	shutdown-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+};
+
+/* X10 connector */
+&ecspi4 {
+	cs-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spidev@0 {
+		compatible = "dh,dhcom-board";
+		reg = <0>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <54000000>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "BUTTON-USER", "", "",
+		"BUTTON-RESET", "", "", "",
+		"", "", "", "",
+		"", "", "BT-REG-ON", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"PSOC-GPIO-1", "", "", "X10-12",
+		"X10-10", "PSOC-GPIO-2", "PSOC-GPIO-3", "",
+		"X10-11", "X10-9", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"DHCOR-HW0", "DHCOR-HW1", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "MAVEO-BOX-HW0", "LED-G", "MAVEO-BOX-VAR1",
+		"MAVEO-BOX-VAR0", "MAVEO-BOX-HW1", "MAVEO-BOX-HW2", "LED-B",
+		"LED-R", "", "", "",
+		"", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"PSOC-SWD-IO", "PSOC-SWD-CLK", "PSOC-RESET", "ZIGBEE-PROG",
+		"ZIGBEE-RESET", "", "PSOC-PWR-FAIL-OUT", "NFC-ENABLE",
+		"NFC-IRQ", "WL-REG-ON", "DHCOR-BOOT-M0", "DHCOR-BOOT-M1",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* Console UART */
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* BT on LGA */
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt_gpio>;
+};
+
+/* Zigbee UART */
+&uart3 {
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_snvs_zigbee_gpio>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg1 {
+	adp-disable;
+	disable-over-current; /* Overcurrent pin isn't connected */
+	dr_mode = "otg";
+	hnp-disable;
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	pinctrl-names = "default";
+	srp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current; /* Overcurrent pin isn't connected */
+	dr_mode = "host";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	pinctrl-names = "default";
+	tpl-support;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+/* WiFi on LGA */
+&usdhc1 {
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	pinctrl-0 = <&pinctrl_usdhc1_wifi &pinctrl_snvs_wifi_gpio>;
+};
+
+/* eMMC */
+&usdhc2 {
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog_maveo_box>;
+	pinctrl-names = "default";
+
+	pinctrl_hog_maveo_box: hog-maveo-box-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x120b0    /* BUTTON_USER */
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x120b0    /* BUTTON_RESET */
+			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x400120b0 /* LED_G */
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x400120b0 /* LED_B */
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x400120b0 /* LED_R */
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x400120b0 /* X10_9 */
+			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0x400120b0 /* X10_10 */
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x400120b0 /* X10_11 */
+			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x400120b0 /* X10_12 */
+			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0x400120b0 /* PSOC_GPIO_1 */
+			MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05	0x400120b0 /* PSOC_GPIO_2 */
+			MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06	0x400120b0 /* PSOC_GPIO_3 */
+			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x120b0    /* MAVEO_BOX_HW0 */
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x120b0    /* MAVEO_BOX_HW1 */
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x120b0    /* MAVEO_BOX_HW2 */
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x120b0    /* MAVEO_BOX_VAR0 */
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x120b0    /* MAVEO_BOX_VAR1 */
+			MX6UL_PAD_LCD_CLK__GPIO3_IO00		0x120b0    /* DHCOR_HW0 */
+			MX6UL_PAD_LCD_ENABLE__GPIO3_IO01	0x120b0    /* DHCOR_HW1 */
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05	0x120b0
+			MX6UL_PAD_LCD_DATA01__GPIO3_IO06	0x120b0
+			MX6UL_PAD_LCD_DATA02__GPIO3_IO07	0x120b0
+			MX6UL_PAD_LCD_DATA03__GPIO3_IO08	0x120b0
+			MX6UL_PAD_LCD_DATA04__GPIO3_IO09	0x120b0
+			MX6UL_PAD_LCD_DATA05__GPIO3_IO10	0x120b0
+			MX6UL_PAD_LCD_DATA06__GPIO3_IO11	0x120b0
+			MX6UL_PAD_LCD_DATA07__GPIO3_IO12	0x120b0
+			MX6UL_PAD_LCD_DATA08__GPIO3_IO13	0x120b0
+			MX6UL_PAD_LCD_DATA09__GPIO3_IO14	0x120b0
+			MX6UL_PAD_LCD_DATA10__GPIO3_IO15	0x120b0
+			MX6UL_PAD_LCD_DATA11__GPIO3_IO16	0x120b0
+			MX6UL_PAD_LCD_DATA12__GPIO3_IO17	0x120b0
+			MX6UL_PAD_LCD_DATA13__GPIO3_IO18	0x120b0
+			MX6UL_PAD_LCD_DATA14__GPIO3_IO19	0x120b0
+			MX6UL_PAD_LCD_DATA15__GPIO3_IO20	0x120b0
+			MX6UL_PAD_LCD_DATA16__GPIO3_IO21	0x120b0
+			MX6UL_PAD_LCD_DATA17__GPIO3_IO22	0x120b0
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x120b0
+		>;
+	};
+
+	pinctrl_bt_gpio: bt-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x400120b0 /* BT_REG_ON */
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO	0x100b1
+			MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI	0x100b1
+			MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK	0x100b1
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0 /* SS0 */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31	0x4001b8b0
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_READY_B__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x120b0 /* USB_OTG1_PWR */
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x120b0 /* USB_OTG2_PWR */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x17059 /* SD2 Reset */
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl-0 = <&pinctrl_snvs_hog_maveo_box>;
+	pinctrl-names = "default";
+
+	pinctrl_snvs_hog_maveo_box: snvs-hog-maveo-box-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x400120b0 /* PSOC_SWD_IO */
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x400120b0 /* PSOC_SWD_CLK */
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x400120b0 /* PSOC_RESET */
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x400120b0 /* PSOC_PWR_FAIL_OUT */
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x400120b0 /* NFC_ENABLE */
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x400120b0 /* NFC_IRQ */
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x120b0    /* DHCOR_BOOT_M0 */
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x120b0    /* DHCOR_BOOT_M1 */
+		>;
+	};
+
+	pinctrl_snvs_wifi_gpio: snvs-wifi-gpio-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400120b0 /* WL_REG_ON */
+		>;
+	};
+
+	pinctrl_snvs_zigbee_gpio: snvs-zigbee-gpio-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x400120b0 /* ZIGBEE_PROG */
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x400120b0 /* ZIGBEE_RESET */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi
index 5882c7565f64..a386c1e9bed3 100644
--- a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi
@@ -11,6 +11,11 @@
 #include "imx6ull.dtsi"
 
 / {
+	aliases {
+		/delete-property/ mmc0;
+		/delete-property/ mmc1;
+	};
+
 	memory@80000000 {
 		/* Appropriate memory size will be filled by U-Boot */
 		reg = <0x80000000 0>;
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
index 5464a52a1f94..ea627638e40c 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
@@ -260,7 +260,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
 	rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
 	linux,rs485-enabled-at-boot-time;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/imx7d-flex-concentrator.dts
index bd6b5285aa8d..3a723843d562 100644
--- a/arch/arm/boot/dts/imx7d-flex-concentrator.dts
+++ b/arch/arm/boot/dts/imx7d-flex-concentrator.dts
@@ -107,7 +107,6 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
-	num-chipselects = <1>;
 	cs-gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
@@ -122,7 +121,6 @@
 &ecspi4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;
-	num-chipselects = <1>;
 	cs-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index a31de900139d..9c6476bda4a0 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -159,7 +159,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index e0bff39e8d3e..73d90845e85c 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -170,7 +170,7 @@
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index f483bc0afe5e..cc9b8570ed4d 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -43,8 +43,8 @@
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_spi4>;
-		gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 		#address-cells = <1>;
@@ -60,6 +60,17 @@
 		};
 	};
 
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SD1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <200000>;
+		off-on-delay-us = <20000>;
+	};
+
 	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_otg1_vbus";
@@ -264,7 +275,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
@@ -473,10 +484,13 @@
 };
 
 &usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
 	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_sd1_vmmc>;
 	wakeup-source;
 	keep-power-in-suspend;
 	status = "okay";
@@ -731,6 +745,15 @@
 			>;
 		};
 
+		pinctrl_usdhc1_gpio: usdhc1_gpiogrp {
+			fsl,pins = <
+				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
+				MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
+				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
+				MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59 /* VSELECT */
+			>;
+		};
+
 		pinctrl_usdhc1: usdhc1grp {
 			fsl,pins = <
 				MX7D_PAD_SD1_CMD__SD1_CMD		0x59
@@ -739,9 +762,28 @@
 				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
 				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
 				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
-				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
-				MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
-				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+			fsl,pins = <
+				MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
+				MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
+				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
+				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
+				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
+				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+			fsl,pins = <
+				MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
+				MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
+				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
+				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
+				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
+				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/imx7d-smegw01.dts b/arch/arm/boot/dts/imx7d-smegw01.dts
index c0f00f5db11e..85b97b5f64e7 100644
--- a/arch/arm/boot/dts/imx7d-smegw01.dts
+++ b/arch/arm/boot/dts/imx7d-smegw01.dts
@@ -13,6 +13,8 @@
 	compatible = "storopack,imx7d-smegw01", "fsl,imx7d";
 
 	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc3;
 		mmc2 = &usdhc2;
@@ -67,7 +69,7 @@
 	reg_wlan_rfkill: regulator-wlan-rfkill {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
-		pinctrl-2 = <&pinctrl_rfkill>;
+		pinctrl-0 = <&pinctrl_rfkill>;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-name = "wlan_rfkill";
@@ -97,8 +99,6 @@
 	sram@0 {
 		compatible = "microchip,48l640";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <16000000>;
 	};
 };
@@ -329,7 +329,7 @@
 		>;
 	};
 
-	pinctrl_rfkill: rfkillrp {
+	pinctrl_rfkill: rfkillgrp {
 		fsl,pins = <
 			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x17059
 		>;
@@ -355,19 +355,19 @@
 		>;
 	};
 
-	pinctrl_usbotg1_lpsr: usbotg1 {
+	pinctrl_usbotg1_lpsr: usbotg1grp {
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x04
 		>;
 	};
 
-	pinctrl_usbotg1_pwr: usbotg1-pwr {
+	pinctrl_usbotg1_pwr: usbotg1-pwrgrp {
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR	0x04
 		>;
 	};
 
-	pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpio {
+	pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpiogrp {
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x04
 		>;
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index e8734d218b9d..ba7231b364bb 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -94,7 +94,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index efe2525b62fa..54026c2c93fa 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -1257,7 +1257,7 @@
 			};
 		};
 
-		dma_apbh: dma-apbh@33000000 {
+		dma_apbh: dma-controller@33000000 {
 			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x33000000 0x2000>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index f91bf719d4e2..b01ddda7bd9e 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -459,6 +459,8 @@
 			compatible = "fsl,imx7ulp-ocotp", "syscon";
 			reg = <0x410a6000 0x4000>;
 			clocks = <&scg1 IMX7ULP_CLK_DUMMY>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/mba6ulx.dtsi
index e25f8f209760..e3b2d23068f7 100644
--- a/arch/arm/boot/dts/mba6ulx.dtsi
+++ b/arch/arm/boot/dts/mba6ulx.dtsi
@@ -235,6 +235,7 @@
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		vcc-supply = <&reg_mba6ul_3v3>;
 	};
 
 	expander_in0: gpio-expander@21 {
@@ -248,6 +249,7 @@
 		#interrupt-cells = <2>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		vcc-supply = <&reg_mba6ul_3v3>;
 
 		enet1_int-hog {
 			gpio-hog;
@@ -267,6 +269,7 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		vcc-supply = <&reg_mba6ul_3v3>;
 	};
 
 	analog_touch: touchscreen@41 {
@@ -300,6 +303,7 @@
 		compatible = "nxp,se97b", "atmel,24c02";
 		reg = <0x51>;
 		pagesize = <16>;
+		vcc-supply = <&reg_mba6ul_3v3>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
index 96495d965163..1a19aec8957b 100644
--- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -202,7 +202,7 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 6280c5e86a12..16b4e06c4efa 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -75,7 +75,7 @@
 
 					port@6 {
 						reg = <6>;
-						label = "cpu";
+						phy-mode = "rmii";
 						ethernet = <&fec1>;
 
 						fixed-link {
@@ -294,9 +294,9 @@
 		pinctrl-names = "default";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		gpio-sck  = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		sck-gpios  = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		cs-gpios  = <&gpio1  9 GPIO_ACTIVE_LOW
 			     &gpio1  8 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <2>;
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index c00d39562a10..6f9878f124c4 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -44,7 +44,7 @@
 
 					port@0 {
 						reg = <0>;
-						label = "cpu";
+						phy-mode = "rmii";
 						ethernet = <&fec1>;
 
 						fixed-link {
@@ -82,6 +82,11 @@
 						label = "dsa";
 						phy-mode = "xaui";
 						link = <&switch1port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 
@@ -174,6 +179,11 @@
 						label = "dsa";
 						phy-mode = "xaui";
 						link = <&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 				mdio {
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index 7b3276cd470f..df1335492a19 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -59,7 +59,7 @@
 
 					port@0 {
 						reg = <0>;
-						label = "cpu";
+						phy-mode = "rmii";
 						ethernet = <&fec1>;
 
 						fixed-link {
@@ -115,6 +115,11 @@
 						link = <&switch1port10
 							&switch3port10
 							&switch2port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 			};
@@ -156,6 +161,11 @@
 						phy-mode = "xgmii";
 						link = <&switch3port10
 							&switch2port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 
 					switch1port10: port@10 {
@@ -163,6 +173,11 @@
 						label = "dsa";
 						phy-mode = "xgmii";
 						link = <&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 			};
@@ -246,6 +261,11 @@
 						link = <&switch3port9
 							&switch1port9
 							&switch0port10>;
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+						};
 					};
 				};
 			};
@@ -295,6 +315,11 @@
 						label = "dsa";
 						phy-mode = "2500base-x";
 						link = <&switch2port10>;
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+						};
 					};
 
 					switch3port10: port@10 {
@@ -303,6 +328,11 @@
 						phy-mode = "xgmii";
 						link = <&switch1port9
 							&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts
index 180acb0795b9..1461804ecaea 100644
--- a/arch/arm/boot/dts/vf610-zii-spb4.dts
+++ b/arch/arm/boot/dts/vf610-zii-spb4.dts
@@ -140,7 +140,7 @@
 
 				port@0 {
 					reg = <0>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
index 73fdace4cb42..463c2452b9b7 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
@@ -129,7 +129,7 @@
 
 				port@0 {
 					reg = <0>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
index 20beaa8433b6..f5ae0d5de315 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
@@ -154,7 +154,7 @@
 
 				port@0 {
 					reg = <0>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index ff4479994b60..3f7dc787938e 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -294,7 +294,6 @@
 				reg = <0x4003e000 0x1000>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_WDT>;
-				clock-names = "wdog";
 				status = "disabled";
 			};
author	Arnd Bergmann <arnd@arndb.de>	2023-06-20 22:38:10 +0200
committer	Arnd Bergmann <arnd@arndb.de>	2023-06-20 22:38:10 +0200
commit	f50a4e594db87ad8beed9bb42a067224724d07de (patch)
tree	0edb7fa01657712dfec9863582581db55eb788a4 /arch/arm
parent	3230271930ad9fb8c82de7b0c5cc41c87da7bc15 (diff)
parent	5ef0f31fb9285d72bbe3bfd80be34284d4b9c7dd (diff)