| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Rename the Rockchip RK3399 SoC dtsi files and, consequently, adjust their
contents and the contents of the affected board dts(i) files appropriately,
to "encapsulate" the different CPU and GPU OPPs for each of the supported
RK3399 SoC variants into the respective SoC variant dtsi files.
Moving the OPPs to the SoC variant dtsi files, instead of requiring the
board dts(i) files to include both the SoC variant dtsi file and the right
OPP variant dtsi file, reduces the possibility for mismatched inclusion and
improves the overall hierarchical representation of data.
These changes follow the approach used for the Rockchip RK3588 SoC variants,
which was introduced and described further in commit def88eb4d836 ("arm64:
dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant OPPs"). Please
see that commit for a more detailed explanation.
No functional changes are introduced, which was validated by decompiling and
comparing all affected dtb files before and after these changes. In more
detail, all decompiled dtb files remain exactly the same, except the files
list below, which results from all of them stemming from the same base board
dtsi file (rk3399-rock-pi-4.dtsi), while all of them include one of the three
different RK3399 SoC variant dtsi files by themselves:
- rk3399-rock-4se.dtb
- rk3399-rock-pi-4a.dtb
- rk3399-rock-pi-4a-plus.dtb
- rk3399-rock-pi-4b.dtb
- rk3399-rock-pi-4b-plus.dtb
- rk3399-rock-pi-4c.dtb
When compared with the decompiled original dtb files, these dtb files have
some of their blocks shuffled around a bit and some of their phandles have
different values, as a result of the changes to the order in which the
building blocks from the parent dtsi files are included into them, but they
still effectively remain the same as the originals.
The only exception to the "include only a SoC variant dtsi" is found in
rk3399-evb.dts, which includes rk3399-base.dtsi instead of rk3399.dtsi.
This is intentional, because this board dts file doesn't enable the TSADC,
so including rk3399.dtsi would enable the SoC to go into higher OPPs with
no thermal throttling in place. Let's hope that people interested in this
board will fix this in the future.
As a side note, due to the nature of introduced changes, this commit is best
viewed using the --break-rewrites option for git-log(1).
Related-to: def88eb4d836 ("arm64: dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant OPPs")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/9417b5c5b64f9aceea64530a85a536169a3e7466.1721532747.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Fix adc-keys sub node names on Rockchip boards,
so that they match with regex: '^button-'
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/6a6a3603-5540-cacc-2672-c015af1ec684@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220616005333.18491-26-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200917185211.5483-2-krzk@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The supply-name for pwm-regualators is "pwm", so the property
needs to be pwm-supply, not vin-supply as in a number of boards.
In all cases changed here, the supplying regulator is always
an always-on fixed-regulator, so there will be no functional
change and only a change in the regulator hirarchy, as can be seen
for example in the regulator-summary.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20211227234529.1970281-2-heiko@sntech.de
|
|
Remove mmc-hs400-enhanced-strobe from the rk3399-khadas-edge dts to
improve compatibility with a wider range of eMMC chips.
Before (BJTD4R 29.1 GiB):
[ 7.001493] mmc2: CQHCI version 5.10
[ 7.027971] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
.......
[ 7.207086] mmc2: mmc_select_hs400es failed, error -110
[ 7.207129] mmc2: error -110 whilst initialising MMC card
[ 7.308893] mmc2: mmc_select_hs400es failed, error -110
[ 7.308921] mmc2: error -110 whilst initialising MMC card
[ 7.427524] mmc2: mmc_select_hs400es failed, error -110
[ 7.427546] mmc2: error -110 whilst initialising MMC card
[ 7.590993] mmc2: mmc_select_hs400es failed, error -110
[ 7.591012] mmc2: error -110 whilst initialising MMC card
After:
[ 6.960785] mmc2: CQHCI version 5.10
[ 6.984672] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
[ 7.175021] mmc2: Command Queue Engine enabled
[ 7.175053] mmc2: new HS400 MMC card at address 0001
[ 7.175808] mmcblk2: mmc2:0001 BJTD4R 29.1 GiB
[ 7.176033] mmcblk2boot0: mmc2:0001 BJTD4R 4.00 MiB
[ 7.176245] mmcblk2boot1: mmc2:0001 BJTD4R 4.00 MiB
[ 7.176495] mmcblk2rpmb: mmc2:0001 BJTD4R 4.00 MiB, chardev (242:0)
Fixes: c2aacceedc86 ("arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards")
Signed-off-by: Artem Lapkin <art@khadas.com>
Link: https://lore.kernel.org/r/20211115083321.2627461-1-art@khadas.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-7-heiko@sntech.de
|
|
add missed ir-receiver and ir_rx pinctl nodes to rk3399-khadas-edge
Khadas Edge board uses gpio-ir-receiver on RK_PB6 gpio
Signed-off-by: Artem Lapkin <art@khadas.com>
Link: https://lore.kernel.org/r/20200923130823.1612533-3-art@khadas.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Khadas Edge Boards uses winbond - w25q128 spi flash with 104Mhz
Signed-off-by: Artem Lapkin <art@khadas.com>
Link: https://lore.kernel.org/r/20200923130823.1612533-2-art@khadas.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Current dts files with 'gpio-led' nodes were manually verified.
In order to automate this process leds-gpio.txt
has been converted to yaml. With this conversion a check
for pattern properties was added. In part 2 rename and label
gpio-led subnodes that passed the regex, but still don't have
the preferred form. Any pin subnode that ends with '-gpio'
in the pinctrl node generates a warning.
Fix with help of the following rules:
1: Add nodename in the preferred form.
2: Always add a label that ends with '_led' to prevent conflicts
with other labels such as 'power' and 'mmc'
3: If leds need pinctrl add a label that ends with '_led_pin'
also to prevent conflicts with other labels.
patternProperties:
# The first form is preferred, but fall back to just 'led'
# anywhere in the node name to at least catch some child nodes.
"(^led-[0-9a-f]$|led)":
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/
leds-gpio.yaml
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/
schemas/gpio/gpio.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200522154657.9472-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
An experimental test with the command below gives this error:
rk3399-firefly.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-orangepi.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-captain.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-v.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
So fix this by adding a reg property to the brcmf sub node.
Also add #address-cells and #size-cells to prevent more warnings.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200110142128.13522-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add devicetree support for Khadas Edge/Edge-V/Captain boards.
Khadas Edge is an expandable Rockchip RK3399 board with goldfinger.
Khadas Captain is the carrier board for Khadas Edge.
Khadas Edge-V is a Khadas VIM form factor Rockchip RK3399 board.
Signed-off-by: Nick Xie <nick@khadas.com>
[edge-captain and edge-v contain different components that are supposed
to get added in future patches, so should stay separate while looking
somewhat similar right now]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|