aboutsummaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/amlogic
AgeCommit message (Collapse)AuthorFilesLines
2024-09-05arm64: dts: amlogic: gxlx-s905l-p271: drop saradc gxlx compatibleNeil Armstrong1-4/+0
Drop the undocumented amlogic,meson-gxlx-saradc compatible by dropping the compatible override, and fix the following DTBs check: /soc/bus@c1100000/adc@8680: failed to match any schema with compatible: ['amlogic,meson-gxlx-saradc', 'amlogic,meson-saradc'] Fixes: f6386b5afa81 ("arm64: dts: meson: add GXLX/S905L/p271 support") Link: https://lore.kernel.org/r/20240905-topic-amlogic-upstream-gxlx-drop-iio-compat-v2-1-7a690eb95bc2@linaro.org [narmstrong: fix commit message] Signed-off-by: Neil Armstrong <[email protected]>
2024-09-02arm64: dts: amlogic: add clock and clock-names to sound cardsNeil Armstrong50-0/+203
Add the missing clocks in the sound card nodes according to the AXG and GX sound card bindings changes. It solves the following errors: sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected) from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml# sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected) from schema $id: http://devicetree.org/schemas/sound/amlogic,gx-sound-card.yaml# sound: 'anyOf' conditional failed, one must be fixed: 'clocks' is a required property '#clock-cells' is a required property from schema $id: http://devicetree.org/schemas/clock/clock.yaml# Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/20240828-topic-amlogic-upstream-bindings-fixes-audio-snd-card-v2-3-58159abf0779@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-09-02arm64: dts: amlogic: c3: fix dtbcheck warningXianwei Zhao3-9/+5
Fix warning when use W=1 to build dtb, as following error: arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:65.7-76.4: Warning (unit_address_vs_reg): /sram: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:168.34-413.6: Warning (unit_address_vs_reg): /soc/bus@fe000000/pinctrl@4000: node has a unit name, but no reg or ranges property arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:168.34-413.6: Warning (simple_bus_reg): /soc/bus@fe000000/pinctrl@4000: missing or empty reg/ranges property arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts:205.9-245.4: Warning (avoid_unnecessary_addr_size): /soc/bus@fe000000/spi@56000 /nand@0: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property Fixes: d4bd8f3023b6 ("arm64: dts: amlogic: add C3 AW419 board") Fixes: 520b792e8317 ("arm64: dts: amlogic: add some device nodes for C3") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Signed-off-by: Xianwei Zhao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-08-30arm64: dts: amlogic: add C3 AW419 boardXianwei Zhao2-0/+263
Add Amlogic C3 C308L AW419 board. The corresponding binding has been applied, therefore, this series does not need to add a binding corresponding to the AW419 board. Reviewed-by: Neil Armstrong <[email protected]> Signed-off-by: Xianwei Zhao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-08-30arm64: dts: amlogic: add some device nodes for C3Xianwei Zhao2-1/+720
Add some device nodes for SoC C3, including periphs clock controller node, PLL clock controller node, SPICC node, regulator node, NAND controller node, sdcard node, Ethernet MAC and PHY node. The sdacrd depends on regulator and pinctrl(select), so some property fields are placed at the board level. The nand chip is placed on the board, So some property fields about SPIFC and NAND controller node are placed at the board level. THe Ethernet MAC support outchip PHY, so place this property field(select PHY) at the board level. Signed-off-by: Xianwei Zhao <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-08-20arm64: dts: amlogic: a4: add ao secure nodeXianwei Zhao1-0/+8
Add node for board info registers, which allows getting SoC family and board revision. For example, with MESON_GX_SOCINFO config enabled we can get the following information for board with Amlogic A4 SoC: soc soc0: Amlogic A4 (A113L2) Revision 40:b (1:1) Detected. Signed-off-by: Xianwei Zhao <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-08-20arm64: dts: amlogic: t7: add ao secure nodeXianwei Zhao1-0/+8
Add node for board info registers, which allows getting SoC family and board revision. For example, with MESON_GX_SOCINFO config enabled we can get the following information for board with Amlogic T7 SoC: soc soc0: Amlogic T7 (A311D2) Revision 36:c (1:1) Detected. Signed-off-by: Xianwei Zhao <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-08-20arm64: dts: amlogic: c3: add ao secure nodeXianwei Zhao1-0/+7
Add node for board info registers, which allows getting SoC family and board revision. For example, with MESON_GX_SOCINFO config enabled we can get the following information for board with Amlogic C3 SoC: soc soc0: Amlogic C3 (C308L) Revision 3d:a (1:1) Detected Signed-off-by: Xianwei Zhao <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-08-20arm64: dts: amlogic: s4: add ao secure nodeXianwei Zhao1-0/+8
Add node for board info registers, which allows getting SoC family and board revision. For example, with MESON_GX_SOCINFO config enabled we can get the following information for board with Amlogic S4 SoC: soc soc0: Amlogic S4 (S805X2) Revision 37:a (2:1) Detecte Signed-off-by: Xianwei Zhao <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-08-20arm64: dts: amlogic: add watchdog node for A4 SoCsHuqiang Qin1-0/+6
Add watchdog device. Signed-off-by: Huqiang Qin <[email protected]> Signed-off-by: Xianwei Zhao <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-08-20arm64: dts: amlogic: enable some device nodes for S4Xianwei Zhao2-0/+273
Enable more device nodes for AQ222 base S4, including SD, regulator and ethnernet node. Reviewed-by: Neil Armstrong <[email protected]> Signed-off-by: Xianwei Zhao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-08-20arm64: dts: amlogic: a5: add power domain controller nodeXianwei Zhao1-0/+10
Add power domain controller node for Amlogic A5 SoC. Signed-off-by: Hongyu Chen <[email protected]> Signed-off-by: Xianwei Zhao <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-07-19Merge tag 'usb-6.11-rc1' of ↵Linus Torvalds1-12/+24
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.11-rc1. Nothing earth-shattering in here, just constant forward progress in adding support for new hardware and better debugging functionalities for thunderbolt devices and the subsystem. Included in here are: - thunderbolt debugging update and driver additions - xhci driver updates - typec driver updates - kselftest device driver changes (acked by the relevant maintainers, depended on other changes in this tree.) - cdns3 driver updates - gadget driver updates - MODULE_DESCRIPTION() additions - dwc3 driver updates and fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (112 commits) kselftest: devices: Add test to detect device error logs kselftest: Move ksft helper module to common directory kselftest: devices: Move discoverable devices test to subdirectory usb: gadget: f_uac2: fix non-newline-terminated function name USB: uas: Implement the new shutdown callback USB: core: add 'shutdown' callback to usb_driver usb: typec: Drop explicit initialization of struct i2c_device_id::driver_data to 0 usb: dwc3: enable CCI support for AMD-xilinx DWC3 controller usb: dwc2: add support for other Lantiq SoCs usb: gadget: Use u16 types for 16-bit fields usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup usb: dwc3: core: Check all ports when set phy suspend usb: typec: tcpci: add support to set connector orientation dt-bindings: usb: Convert fsl-usb to yaml usb: typec: ucsi: reorder operations in ucsi_run_command() usb: typec: ucsi: extract common code for command handling usb: typec: ucsi: inline ucsi_read_message_in usb: typec: ucsi: rework command execution functions usb: typec: ucsi: split read operation usb: typec: ucsi: simplify command sending API ...
2024-06-28arm64: dts: amlogic: setup hdmi system clockJerome Brunet3-0/+15
HDMI Tx needs the system clock set on the xtal rate. This clock is managed by the main clock controller of the related SoCs. Currently 2 part of the display drivers race to setup the HDMI system clock by directly poking the controller register. The clock API should be used to setup the rate instead. Use assigned-clock to setup the HDMI system clock. Fixes: 6939db7e0dbf ("ARM64: dts: meson-gx: Add support for HDMI output") Signed-off-by: Jerome Brunet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-06-28arm64: dts: amlogic: gx: correct hdmi clocksJerome Brunet2-4/+4
The clocks provided to HDMI tx are not consistent between gx and g12: * gx receives the peripheral clock as 'isfr' while g12 receives it as 'iahb' * g12 gets the HDMI system clock as 'isfr' but gx does not even get it. It surely needs that clock since the driver is directly poking around the clock controller's registers for that clock. Align gx SoCs with g12 and provide: * the HDMI peripheral clock as 'iahb' * the HDMI system clock as 'isfr' Fixes: 6939db7e0dbf ("ARM64: dts: meson-gx: Add support for HDMI output") Signed-off-by: Jerome Brunet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-06-27arm64: dts: amlogic: Add Amlogic S4 PWMJunyi Zhao1-0/+199
Add device nodes for PWM_AB, PWM_CD, PWM_EF, PWM_GH and PWM_IJ along with GPIO PIN configs of each channel. Signed-off-by: Junyi Zhao <[email protected]> Reviewed-by: George Stark <[email protected]> Signed-off-by: Kelvin Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-06-26arm64: dts: amlogic: add power domain to hdmitxJerome Brunet4-0/+10
HDMI Tx needs HDMI Tx memory power domain turned on. This power domain is handled under the VPU power domain. The HDMI Tx currently works because it is enabling the PD by directly poking the power controller register. It is should not do that but properly use the power domain controller. Fix this by adding the power domain to HDMI Tx. Signed-off-by: Jerome Brunet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-06-25arm64: dts: amlogic: g12: bump spdif output drive strengthJerome Brunet1-4/+4
Spdif output currently uses a 0.5mA drive strength by default. While the result depends on how the spdif output is hooked to rest of the system, this is a bit weak and signal quality may be poor. This was reported on the vim3l for example. Increase the drive strength to 3mA, as used for TDM, to be on the safe side. Fixes: 649675db939d ("arm64: dts: meson: g12a: add spdifouts") Signed-off-by: Jerome Brunet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-06-25arm64: dts: amlogic: sm1: fix spdif compatiblesJerome Brunet1-2/+2
The spdif input and output of g12 and sm1 are compatible but sm1 should use the related compatible since it exists. Fixes: 86f2159468d5 ("arm64: dts: meson-sm1: add spdifin and pdifout nodes") Signed-off-by: Jerome Brunet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-06-24arm64: dts: amlogic: ad402: fix thermal zone node nameNeil Armstrong1-1/+1
Fixes the following: thermal-zones: 'soc_thermal' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml# Fixes: 593ab951232b ("arm64: dts: amlogic: ad402: setup thermal-zones") Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/20240624-topic-amlogic-upstream-bindings-fixes-dts-round-2-v1-1-0a21f456eb8d@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-06-24arm64: dts: meson: add initial support for Dreambox One/TwoChristian Hewitt4-0/+193
Dreambox One and Dreambox Two are based on the Amlogic W400 reference board with an S922X chip and the following specs: - 2GB DDR3 RAM - 16GB eMMC - 10/100/1000 Base-T Ethernet - AP6356 Wireless (802.11 b/g/n/ac, BT 5.0) - HDMI 2.1 video - S/PDIF optical output - 2x DVB-S2/T2 - Smartcard Reader Slot - 2x USB 2.0 port (1x micro-USB for service) - 1x USB 3.0 port - IR receiver - 1x Power LED (blue) - 1x Power button (top) - 1x Update/Reset button (underside) - 1x micro SD card slot Dreambox Two differences: - 3" Colour LCD display (MIPI-DSI) - Common Interface Slot Signed-off-by: Christian Hewitt <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-06-24arm64: dts: meson: add support for OSMC Vero 4KChristian Hewitt2-0/+200
The OSMC Vero 4K device is based on the Amlogic S905X (P212) reference design with the following specifications: - 2GB DDR4 RAM - 16GB eMMC - HDMI 2.1 video - S/PDIF optical output - AV output - 10/100 Ethernet - AP6255 Wireless (802.11 a/b/g/n/ac, BT 4.2) - 2x USB 2.0 ports (1x OTG) - IR receiver (internal) - IR extender port (external) - 1x micro SD card slot - 1x Power LED (red) - 1x Reset button (in AV jack) Signed-off-by: Christian Hewitt <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-06-20arm64: dts: amlogic: Used onboard usb hub reset on odroid n2Anand Moon1-12/+24
On Odroid n2/n2+ previously use gpio-hog to reset the usb hub, switch to used on-board usb hub reset to enable the usb hub and enable power to hub. Signed-off-by: Anand Moon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-06-07arm64: dts: amlogic: gxbb-odroidc2: fix invalid reset-gpio propertyNeil Armstrong1-1/+1
This fixes the following: hub@1: 'reset-gpio' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml# Tested-by: Christian Hewitt <[email protected]> Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-12-62e812729541@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-06-07arm64: dts: amlogic: a1: drop the invalid reset-name for usb@fe004400Neil Armstrong1-1/+0
This fixes the following: usb@fe004400: 'reset-name' does not match any of the regexes: '^usb@[0-9a-f]+$', 'pinctrl-[0-9]+' Tested-by: Christian Hewitt <[email protected]> Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-11-62e812729541@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-06-07arm64: dts: amlogic: a1: use correct node name for mmc controllerNeil Armstrong1-1/+1
This fixes the following: sd@10000: $nodename:0: 'sd@10000' does not match '^mmc(@.*)?$' Tested-by: Christian Hewitt <[email protected]> Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-10-62e812729541@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-06-07arm64: dts: amlogic: c3: use correct compatible for gpio_intc nodeNeil Armstrong1-2/+1
This fixes the following: interrupt-controller@4080: compatible: 'oneOf' conditional failed, one must be fixed: ['amlogic,meson-gpio-intc', 'amlogic,c3-gpio-intc'] is too long 'amlogic,meson-gpio-intc' is not one of ['amlogic,meson8-gpio-intc', 'amlogic,meson8b-gpio-intc', 'amlogic,meson-gxbb-gpio-intc', 'amlogic,meson-gxl-gpio-intc', 'amlogic,meson-axg-gpio-intc', 'amlogic,meson-g12a-gpio-intc', 'amlogic,meson-sm1-gpio-intc', 'amlogic,meson-a1-gpio-intc', 'amlogic,meson-s4-gpio-intc', 'amlogic,c3-gpio-intc', 'amlogic,t7-gpio-intc'] 'amlogic,meson-gpio-intc' was expected Tested-by: Christian Hewitt <[email protected]> Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-9-62e812729541@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-06-07arm64: dts: amlogic: axg: fix tdm audio-controller clock orderNeil Armstrong1-12/+12
This fixes the following: audio-controller-0: clock-names:0: 'sclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-0: clock-names:1: 'lrclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-0: clock-names:2: 'mclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-1: clock-names:0: 'sclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-1: clock-names:1: 'lrclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-1: clock-names:2: 'mclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-2: clock-names:0: 'sclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-2: clock-names:1: 'lrclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-2: clock-names:2: 'mclk' was expected Tested-by: Christian Hewitt <[email protected]> Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-8-62e812729541@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-06-07arm64: dts: amlogic: g12a-u200: add missing AVDD-supply to acodecNeil Armstrong1-0/+1
This fixes the following: audio-controller@32000: 'AVDD-supply' is a required property Tested-by: Christian Hewitt <[email protected]> Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-7-62e812729541@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-06-07arm64: dts: amlogic: g12a-u200: drop invalid sound-dai-cellsNeil Armstrong1-1/+0
This fixes the following: audio-amplifier-0: '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+' Tested-by: Christian Hewitt <[email protected]> Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-6-62e812729541@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-06-07arm64: dts: amlogic: sm1: fix tdm controllers compatibleNeil Armstrong1-8/+4
Fixes the following: audio-controller@300: compatible: ['amlogic,sm1-tdmin', 'amlogic,axg-tdmin'] is too long from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml# audio-controller@340: compatible: ['amlogic,sm1-tdmin', 'amlogic,axg-tdmin'] is too long from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml# audio-controller@380: compatible: ['amlogic,sm1-tdmin', 'amlogic,axg-tdmin'] is too long from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml# audio-controller@3c0: compatible: ['amlogic,sm1-tdmin', 'amlogic,axg-tdmin'] is too long from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml# Tested-by: Christian Hewitt <[email protected]> Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-5-62e812729541@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-06-07arm64: dts: amlogic: sm1: fix tdm audio-controller clock orderNeil Armstrong1-12/+12
Fix the clock order in the tdm audio-controller nodes, this fixes the following errors: audio-controller-0: clock-names:0: 'sclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-0: clock-names:1: 'lrclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-0: clock-names:2: 'mclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-1: clock-names:0: 'sclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-1: clock-names:1: 'lrclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-1: clock-names:2: 'mclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-2: clock-names:0: 'sclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-2: clock-names:1: 'lrclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# audio-controller-2: clock-names:2: 'mclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# Tested-by: Christian Hewitt <[email protected]> Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-4-62e812729541@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-06-07arm64: dts: amlogic: move ao_pinctrl into aobusNeil Armstrong1-215/+212
The AO pinctrl was mis-described as beeing part of AO rti sysctrl, move it it into aobus like it's also done in GX SoCs, and remove the now invalid '#address-cells', '#size-cells' & 'ranges from the sys-ctrl@0 node. This fixes: sys-ctrl@0: '#address-cells', '#size-cells', 'ranges' do not match any of the regexes: 'pinctrl-[0-9]+' Tested-by: Christian Hewitt <[email protected]> Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-2-62e812729541@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-06-07arm64: dts: amlogic: meson-g12b-bananapi: remove invalid fan on wrong pwm_cd ↵Neil Armstrong1-14/+0
controller The fan is connected to the GPIOAO_10 pin, which can be connected to the pwm_AO_cd controller, but this one is already used for the vddcpu_b regulator. The fan was wrongly described as using the pwm_cd with the invalid "pwm-gpios" property, both are wrong so remove the fan until we find an acceptable solution. This fixes the following error: pwm@1a000: 'pwm-gpios' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/pwm/pwm-amlogic.yaml# Tested-by: Christian Hewitt <[email protected]> Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-1-62e812729541@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-06-06arm64: dts: amlogic: a4: add power domain controller nodeXianwei Zhao1-0/+10
Add power domain controller node for Amlogic A4 SoC Signed-off-by: Xianwei Zhao <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-06-06arm64: dts: meson: radxa-zero2: add pwm-fan supportChristian Hewitt1-0/+24
The A311D on Zero2 needs active cooling and the board includes a header to connect a simple fan. Add pwm-fan support with basic thermal properties so the fan runs when connected. Suggested-by: Yuntian Zhang <[email protected]> Signed-off-by: Christian Hewitt <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-06-06arm64: dts: meson: add GXLX/S905L/p271 supportChristian Hewitt2-0/+52
Add a device-tree for the GXLX Amlogic P271 (S905L) reference design board. This is a low-cost design similar to P281 (S905W) but with silicon differences to omit VP9 and use Mali 450-MP2 (not MP3). The SoC is marked with S905L and "2" (believed to denote MP2) resulting in chip distributor stock lists and Android STB marketing sometimes describing it as an S905L2 chip. Signed-off-by: Christian Hewitt <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-06-06arm64: dts: amlogic: ad402: move thermal-zones to top nodeArnd Bergmann1-31/+31
It appears that this accidentally got added into the spi node, causing a warning. arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts:119.16-161.4: Warning (spi_bus_reg): /soc/spi@fd000400/thermal-zones: missing or empty reg property Fixes: 593ab951232b ("arm64: dts: amlogic: ad402: setup thermal-zones") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-05-27arm64: dts: amlogic: ad402: setup thermal-zonesDmitry Rokosov1-0/+45
There is one thermal zone with 3 trip points: soc_passive, soc_hot, and soc_critical, as well as two cooling maps. Signed-off-by: Dmitry Rokosov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-05-27arm64: dts: amlogic: a1: introduce cpu temperature sensorDmitry Rokosov1-0/+11
The A1 SoC family has only one thermal sensor for CPU temperature measurement. It is required to set the TS clock rate to 500kHz to make it workable. Signed-off-by: Dmitry Rokosov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-05-27arm64: dts: amlogic: a1: add cooling-cells for DVFS featureDmitry Rokosov1-0/+2
It's used for CPU with DVFS feature to specify minimum and maximum cooling state used in the reference. Without these values DVFS will not work and dtbs_check will raise the error. Signed-off-by: Dmitry Rokosov <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-04-23arm64: dts: amlogic: Add Amlogic T7 reset controllerZelong Dong2-0/+204
Add the device node and related header file for Amlogic T7 reset controller. Signed-off-by: Zelong Dong <[email protected]> Signed-off-by: Kelvin Zhang <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-04-12arm64: dts: add support for A5 based Amlogic AV400Xianwei Zhao3-0/+83
Amlogic A5 is an application processor designed for smart audio and IoT applications. Add basic support for the A5 based Amlogic AV400 board, which describes the following components: CPU, GIC, IRQ, Timer and UART. These are capable of booting up into the serial console. Signed-off-by: Xianwei Zhao <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-04-12arm64: dts: add support for A4 based Amlogic BA400Xianwei Zhao4-0/+149
Amlogic A4 is an application processor designed for smart audio and IoT applications. Add basic support for the A4 based Amlogic BA400 board, which describes the following components: CPU, GIC, IRQ, Timer and UART. These are capable of booting up into the serial console. Signed-off-by: Xianwei Zhao <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-04-12arm64: dts: meson: fix S4 power-controller nodeXianwei Zhao1-4/+9
The power-controller module works well by adding its parent node secure-monitor. Fixes: 085f7a298a14 ("arm64: dts: add support for S4 power domain controller") Signed-off-by: Xianwei Zhao <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-04-10arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 ↵Neil Armstrong2-0/+385
with CM4 adaper This adds a basic devicetree for the MNT Reform2 DIY laptop when using a CM4 adapter and a BPI-CM4 module. Co-developed-by: Lukas F. Hartmann <[email protected]> Link: https://lore.kernel.org/r/20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-7-99ecdfdc87fc@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-04-10arm64: meson: khadas-vim3l: add TS050 DSI panel overlayNeil Armstrong2-0/+112
This add dtbo overlay to support the Khadas TS050 panel on the Khadas VIM3 & VIM3L boards. Link: https://lore.kernel.org/r/20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-6-99ecdfdc87fc@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-04-10arm64: meson: g12-common: add the MIPI DSI nodesNeil Armstrong1-0/+70
Add the MIPI DSI Analog & Digital PHY nodes and the DSI control nodes with proper port endpoint to the VPU. Link: https://lore.kernel.org/r/20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-5-99ecdfdc87fc@linaro.org Signed-off-by: Neil Armstrong <[email protected]>
2024-03-12Merge tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds44-184/+708
Pull SoC device tree updates from Arnd Bergmann: "There is very little going on with new SoC support this time, all the new chips are variations of others that we already support, and they are all based on ARMv8 cores: - Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are networking SoCs designed to be used in wireless routers, similar to the already supported MT7986A (Filogic 830). - NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less. These are used in many embedded and industrial applications. - Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are automotive SoCs. - TI J722S is another automotive variant of its K3 family, related to the AM62 series. There are a total of 7 new arm32 machines and 45 arm64 ones, including - Two Android phones based on the old Tegra30 chip - Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a SoM development board - A set-top box using Amlogic Meson G12A S905X2 - Eight embedded board using NXP i.MX6/8/9 - Three machines using Mediatek network router chips - Ten Chromebooks, all based on Mediatek MT8186 - One development board based on Mediatek MT8395 (Genio 1200) - Seven tablets and phones based on Qualcomm SoCs, most of them from Samsung. - A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2) - Three variants of the "White Hawk" board for Renesas automotive SoCs - Ten Rockchips RK35xx based machines, including NAS, Tablet, Game console and industrial form factors. - Three evaluation boards for TI K3 based SoCs The other changes are mainly the usual feature additions for existing hardware, cleanups, and dtc compile time fixes. One notable change is the inclusion of PowerVR SGX GPU nodes on TI SoCs" * tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits) riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig riscv: dts: starfive: jh7100: fix root clock names ARM: dts: samsung: exynos4412: decrease memory to account for unusable region arm64: dts: qcom: sm8250-xiaomi-elish: set rotation arm64: dts: qcom: sm8650: Fix SPMI channels size arm64: dts: qcom: sm8550: Fix SPMI channels size arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433 arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk dtc: Enable dtc interrupt_provider check arm64: dts: st: add video encoder support to stm32mp255 arm64: dts: st: add video decoder support to stm32mp255 ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk ARM: dts: stm32: enable CRC on stm32mp135f-dk ARM: dts: stm32: add CRC on stm32mp131 ARM: dts: add stm32f769-disco-mb1166-reva09 ARM: dts: stm32: add display support on stm32f769-disco ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco ARM: dts: stm32: add DSI support on stm32f769 ...
2024-02-22arm64: dts: Add gpio_intc node for Amlogic-T7 SoCsHuqiang Qin1-0/+10
Add GPIO interrupt controller device. Signed-off-by: Huqiang Qin <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.