| Age | Commit message (Collapse) | Author | Files | Lines |
|
Removed a few unimplemented commands. Added a note for a few fields that are
not implemented in the firmware, and clarified several issues around reverse
playback.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Correct mis-spellings of "algorithm", "appear", "consistent" and
(shame, shame) "kernel".
Signed-off-by: Robert P. J. Day <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
|
|
The VIDEO_ZR36120 driver has:
- already been marked as BROKEN in 2.6.0 three years ago and
- is still marked as BROKEN.
Drivers that had been marked as BROKEN for such a long time seem to be
unlikely to be revived in the forseeable future.
But if anyone wants to ever revive this driver, the code is still
present in the older kernel releases.
Signed-off-by: Adrian Bunk <[email protected]>
Acked-by: Mauro Carvalho Chehab <[email protected]>
|
|
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This is a hybrid cardbus module. Besides the card support, i
modified the definition names for AGC and GPIO of the tda10046.
Signed-off-by: Hartmut Hackmann <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This patch adds support for the Hauppauge WinTV-HVR1110 DVB-T/Hybrid
Signed-off-by: Thomas Genty <[email protected]>
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
A driver for the Marvell M88ALP01 "CAFE" CMOS integrated camera
controller. This driver has been renamed "cafe_ccic" since my previous
patch set.
Signed-off-by: Jonathan Corbet <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This board has the same PCI ID as the T200, so the exact board type
is determined from the eeprom.
The original patch was provided by Francis Barber <[email protected]>
Signed-off-by: Hartmut Hackmann <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This card has no firmware eeprom. The old version still should not
need a firmware file due to an undocumented feature of the TDA10046.
The patch also includes Hermann Pitton's proposal for improved
antenna switch handling
Signed-off-by: Hartmut Hackmann <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This is just an additional analog board configuration.
Signed-off-by: Mikhail Fedotov <mo_fedotov.mail.ru>
Signed-off-by: Hartmut Hackmann <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The driver supports analog TV, radio and DVB-T.
It is based on the preliminary patch by Pierluigi Rolando.
Signed-off-by: Hartmut Hackmann <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The WinTV-HVR3000 is currently defined for analog support only. This
patch adds full DVB-T support. (DVB-S support will be added soon)
Signed-off-by: Steven Toth <[email protected]>
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This is a analog DVB-T hybrid board
Signed-off-by: Hartmut Hackmann <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (39 commits)
Add missing maintainer countries in CREDITS
Fix bytes <-> kilobytes typo in Kconfig for ramdisk
fix a typo in Documentation/pi-futex.txt
BUG_ON conversion for fs/xfs/
BUG_ON() conversion in fs/nfsd/
BUG_ON conversion for fs/reiserfs
BUG_ON cleanups in arch/i386
BUG_ON cleanup in drivers/net/tokenring/
BUG_ON cleanup for drivers/md/
kerneldoc-typo in led-class.c
debugfs: spelling fix
rcutorture: Fix incorrect description of default for nreaders parameter
parport: Remove space in function calls
Michal Wronski: update contact info
Spelling fix: "control" instead of "cotrol"
reboot parameter in Documentation/kernel-parameters.txt
Fix copy&waste bug in comment in scripts/kernel-doc
remove duplicate "until" from kernel/workqueue.c
ite_gpio fix tabbage
fix file specification in comments
...
Fixed trivial path conflicts due to removed files:
arch/mips/dec/boot/decstation.c, drivers/char/ite_gpio.c
|
|
Remove many duplicated words under Documentation/ and do other small
cleanups.
Examples:
"and and" --> "and"
"in in" --> "in"
"the the" --> "the"
"the the" --> "to the"
...
Signed-off-by: Paolo Ornati <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
|
|
This patch fixes typos in various Documentation txts. The patch addresses
some words starting with the letters 'Q'-'R'.
Signed-off-by: Matt LaPlante <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
|
|
Randy brought it to my attention that in proper english "can not" should always
be written "cannot". I donot see any reason to argue, even if I mightnot
understand why this rule exists. This patch fixes "can not" in several
Documentation files as well as three Kconfigs.
Signed-off-by: Matt LaPlante <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
|
|
This patch fixes typos in various Documentation txts. The patch addresses
some words starting with the letters 'N'-'P'.
Signed-off-by: Matt LaPlante <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
|
|
This patch fixes typos in various Documentation txts. The patch addresses
some words starting with the letters 'H'-'M'.
Signed-off-by: Matt LaPlante <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
|
|
This patch fixes typos in various Documentation txts. This patch addresses
some words starting with the letters 'D'-'E'.
Signed-off-by: Matt LaPlante <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
|
|
This patch fixes typos in various Documentation txts. This patch addresses some
words starting with the letters 'B'-'C'. There are also a few grammar fixes
thrown in for Randy. ;)
Signed-off-by: Matt LaPlante <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
|
|
Adding support for Nova-T-PCI PCI ID 0070:9000
Signed-off-by: Steven Toth <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This adds support for a hybrid PAL/DVB/FM card. Unfortunately I tested
only the DVB since I don't have any proper antenna available and I can
receive even the DVB just barely so; I can hear noise in the FM part but I
couldn't catch any station, then again I don't have an FM antenna either.
The PAL/FM and IR control data are based on what I harvested on the 'net.
Perhaps I or someone else will fix them if they turn out to be wrong.
Signed-off-by: Petr Baudis <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The Club3D Zap TV2100 has been reported to be a clone of the Yuan PG300 and
KWorld/VStream XPert DVB-T with cx22702
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add autodetection for PCI subsystem ID 107d:6632, to detect as
a Leadtek PVR 2000
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This is the first in a series of patches to add full WinTV-HVR1300
support to Linux. This first patch will enable analog TV support
and DVB-T support. Later patches will add the hardware MPEG encoder
support.
Signed-off-by: Steven Toth <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add card support for Proteus Pro 2309, based on saa7130 bridge
Signed-off-by: Michal Majchrowicz <[email protected]>
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Software I2C were using a very conservative value of udelay=16, meaning about
20Kbps. According with Philips I2C datasheet, the i2c should answer well for
times at the order of 4.7 us. So, using udelay=5 should work for all devices.
After this patch, the speed should be close to 66,67 Kbps, with the current
kernel software bitbang, with 30/60 duty cycle.
Anyway, added a new parameter (i2c_udelay) that would allow using conservative
values, if eventually a hardware doesn't support the datasheet values.
Thanks to Jean Delvare <[email protected]> for pointing this improvement.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
README.hm12: documentation on the HM12 YUV format used by the cx23415/6 chip.
README.vbi: documentation on the V4L2_MPEG_STREAM_VBI_FMT_IVTV VBI format
used in MPEG streams.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add support for Acorp TV134DS and FlyDVB-S cards (both based on
tda10086+tda826x)
Signed-off-by: Igor M. Liplianin <[email protected]>
Signed-off-by: Andrew de Quincey <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Tuner card support
Add support for Shenzhen Tungsten Ages Tech TE-DTV-250 OEM for
Swann PCI TV Tuner Card
Signed-off-by: David Bussenschutt <[email protected]>
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This patch adds support for Norwood PCI TV Tuner (non-pro)
Signed-off-by: Peter Naulls <[email protected]>
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This patch adds autodetection support for the AverMedia M150-D
blackbird MPEG encoder / analog video capture card.
This board is known to work with the ASUS PVR 416 configuration.
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
add initial support for Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
only analog is working for now
Signed-off-by: Eric Thomas <[email protected]>
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
It is just another Lifeview clone
Signed-off-by: Hartmut Hackmann <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The change is just an additional PCI ID
Signed-off-by: Hartmut Hackmann <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Analog TV, CVBS, S-video and DVB-T are working,
DVB-S not yet
Signed-off-by: Hartmut Hackmann <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This patch adds support for the Geniatech Digistar, aka
Digiwave 103g DVB-S card.
Acked-by: Andrew de Quincey <[email protected]>
Signed-off-by: Saqeb Akhter <[email protected]>
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Implement V4L2 driver for the Hauppauge PVR USB2 TV tuner.
The Hauppauge PVR USB2 is a USB connected TV tuner with an embedded
cx23416 hardware MPEG2 encoder. There are two major variants of this
device; this driver handles both. Any V4L2 application which
understands MPEG2 video stream data should be able to work with this
device.
Signed-off-by: Mike Isely <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
CX2341X port was always set to 'memory', but 'streaming' is also possible
ivtv uses the memory (DMA) interface with the CX2341X, while pvrusb2 and
cx88-blackbird use the streaming interface. This setting is now selectable
by the driver.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Based on recent tests it turned out that some features are not implemented.
This has now been documented.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add support for FusionHDTV 3 Gold (original revision), using the
card definition for FusionHDTV3 Gold-Q
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Signed-off-by: Trent Piepho <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The description of the card has been updated to it's full name/model.
The tuner has also been switched to a more compatible one (radio
wasn't working, now it is)
Signed-off-by: Ricardo Cerqueira <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
- use eeprom data to detect Osprey 230
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add DVB-T and PAL-G television support for Winfast DTV2000H
Signed-off-by: Malcolm Valentine <[email protected]>
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|