| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Correct spelling problems for Documentation/isdn/ as reported
by codespell.
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Karsten Keil <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The staging isdn drivers are gone, and CONFIG_BT_CMTP is now
the only user. This means a lot of the code in the subsystem
has no remaining callers and can be removed.
Change the capi user space front-end to be part of kernelcapi,
and the combined module to only be compiled if BT_CMTP is
also enabled, then remove the interfaces that have no remaining
callers.
As the notifier list and the capi_drivers list have no callers
outside of kcapi.c, the implementation gets much simpler.
Some definitions from the include/linux/*.h headers are only
needed internally and are moved to kcapi.h.
Acked-by: David Miller <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
As described in drivers/staging/isdn/TODO, the drivers are all
assumed to be unmaintained and unused now, with gigaset being the
last one to stop being maintained after Paul Bolle lost access
to an ISDN network.
The CAPI subsystem remains for now, as it is still required by
bluetooth/cmtp.
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The ISDN documentation is a mix of admin guide, uAPI and kAPI.
Ideally, it should be split. Yet, not sure if it would worth
the troble. Anyway, we have the same kind of mix on several
drivers specific documentation. So, just like the others, keep
the directory at the root Documentation/ tree, just adding a
pointer to it at the kAPI section, as the documentation was
written with the Kernel developers in mind.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
With all isdn4linux hardware drivers gone, this is only a wrapper around
CAPI to support old user space. However, from looking at the mailing
list, it seems that the last time anyone asked about it was in 2014,
when the upgrade from a linux-2.4 installation failed, and mISDN was
suggested as a replacement.
The largest public ISDN network (Deutsche Telekom) was supposed to be
shut down 2018, which must have drastically reduced the number of legacy
installations.
When we last discussed removing i4l in 2016, Karsten Keil suggested
revisiting this in 2018. I guess this is overdue.
Link: http://listserv.isdn4linux.de/pipermail/isdn4linux/2014-October/006165.html
Link: https://patchwork.kernel.org/patch/8484861/#17900371
Link: https://listserv.isdn4linux.de/pipermail/isdn4linux/2019-April/thread.html
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
With the decline of ISDN, this seems to have become almost completely
obsolete, and even in the past years before that, almost all remaining
users appear to have used mISDN instead.
Birger Harzenetter noted that he is still using i4l/hisax to take
advantage of the 'divert' driver for call diversion, but otherwise uses
mISDN on the same hardware. This is a rare edge case as far as I
can tell, but we are still breaking an actively used work flow
(see https://xkcd.com/1172/).
We debated moving i4l/hisax to staging as an intermediate step, but as
he is not likely to change the setup, and that would just delay breaking
this use case. The alternatives here are to stay on stable kernels
< 5.2, to create an external driver repository for isdn4linux, or to
add divert functionality to mISDN.
Cc: Birger Harzenetter <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
isdn4linux is getting removed, and the gigaset driver can still
use the CAPI support, so this can all go away.
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
This is a respin with a wider audience (all that get_maintainer returned)
and I know this spams a *lot* of people. Not sure what would be the correct
way, so my apologies for ruining your inbox.
The 00-INDEX files are supposed to give a summary of all files present
in a directory, but these files are horribly out of date and their
usefulness is brought into question. Often a simple "ls" would reveal
the same information as the filenames are generally quite descriptive as
a short introduction to what the file covers (it should not surprise
anyone what Documentation/sched/sched-design-CFS.txt covers)
A few years back it was mentioned that these files were no longer really
needed, and they have since then grown further out of date, so perhaps
it is time to just throw them out.
A short status yields the following _outdated_ 00-INDEX files, first
counter is files listed in 00-INDEX but missing in the directory, last
is files present but not listed in 00-INDEX.
List of outdated 00-INDEX:
Documentation: (4/10)
Documentation/sysctl: (0/1)
Documentation/timers: (1/0)
Documentation/blockdev: (3/1)
Documentation/w1/slaves: (0/1)
Documentation/locking: (0/1)
Documentation/devicetree: (0/5)
Documentation/power: (1/1)
Documentation/powerpc: (0/5)
Documentation/arm: (1/0)
Documentation/x86: (0/9)
Documentation/x86/x86_64: (1/1)
Documentation/scsi: (4/4)
Documentation/filesystems: (2/9)
Documentation/filesystems/nfs: (0/2)
Documentation/cgroup-v1: (0/2)
Documentation/kbuild: (0/4)
Documentation/spi: (1/0)
Documentation/virtual/kvm: (1/0)
Documentation/scheduler: (0/2)
Documentation/fb: (0/1)
Documentation/block: (0/1)
Documentation/networking: (6/37)
Documentation/vm: (1/3)
Then there are 364 subdirectories in Documentation/ with several files that
are missing 00-INDEX alltogether (and another 120 with a single file and no
00-INDEX).
I don't really have an opinion to whether or not we /should/ have 00-INDEX,
but the above 00-INDEX should either be removed or be kept up to date. If
we should keep the files, I can try to keep them updated, but I rather not
if we just want to delete them anyway.
As a starting point, remove all index-files and references to 00-INDEX and
see where the discussion is going.
Signed-off-by: Henrik Austad <[email protected]>
Acked-by: "Paul E. McKenney" <[email protected]>
Just-do-it-by: Steven Rostedt <[email protected]>
Reviewed-by: Jens Axboe <[email protected]>
Acked-by: Paul Moore <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Mark Brown <[email protected]>
Acked-by: Mike Rapoport <[email protected]>
Cc: [Almost everybody else]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
and switch to https where possible.
All links have been eyeballed to verify that the domains have
not changed, etc.
Signed-off-by: Sanjeev Gupta <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The previous patch renamed several files that are cross-referenced
along the Kernel documentation. Adjust the links to point to
the right places.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The icn, act2000 and pcbit drivers are all for very old hardware,
and it is highly unlikely that anyone is actually still using them
on modern kernels, if at all.
All three drivers apparently are for hardware that predates PCI
being the common connector, as they are ISA-only and active
PCI ISDN cards were widely available in the 1990s.
Looking through the git logs, it I cannot find any indication of a
patch to any of these drivers that has been tested on real hardware,
only cleanups or global API changes.
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Karsten Keil <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Usage of /etc/modprobe.conf file was deprecated by module-init-tools and
is no longer parsed by new kmod tool. References to this file are
replaced in Documentation, comments and Kconfig according to the
context.
There are also some references to the old /etc/modules.conf from 2.4
kernels that are being removed.
Signed-off-by: Lucas De Marchi <[email protected]>
Acked-by: Takashi Iwai <[email protected]>
Acked-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Change all "arch/i386" to "arch/x86" in Documentaion/,
since the directory has changed.
Also update the files which have changed their filename
in the meantime accordingly.
Signed-off-by: Wanlong Gao <[email protected]>
[[email protected]: reword changelog]
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits)
Documentation: update broken web addresses.
fix comment typo "choosed" -> "chosen"
hostap:hostap_hw.c Fix typo in comment
Fix spelling contorller -> controller in comments
Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault
fs/Kconfig: Fix typo Userpace -> Userspace
Removing dead MACH_U300_BS26
drivers/infiniband: Remove unnecessary casts of private_data
fs/ocfs2: Remove unnecessary casts of private_data
libfc: use ARRAY_SIZE
scsi: bfa: use ARRAY_SIZE
drm: i915: use ARRAY_SIZE
drm: drm_edid: use ARRAY_SIZE
synclink: use ARRAY_SIZE
block: cciss: use ARRAY_SIZE
comment typo fixes: charater => character
fix comment typos concerning "challenge"
arm: plat-spear: fix typo in kerneldoc
reiserfs: typo comment fix
update email address
...
|
|
Below you will find an updated version from the original series bunching all patches into one big patch
updating broken web addresses that are located in Documentation/*
Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
Now there are also some addresses pointing to .spec files some are located, but some(after searching
on the companies site)where still no where to be found. In this case I just changed the address
to the company site this way the users can contact the company and they can locate them for the users.
Signed-off-by: Justin P. Mattock <[email protected]>
Signed-off-by: Thomas Weber <[email protected]>
Signed-off-by: Mike Frysinger <[email protected]>
Cc: Paulo Marques <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Michael Neuling <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
The CAPI variant of the Gigaset drivers can, in combination with
capidrv, now fully replace the legacy ISDN4Linux variant. All
reported problems have been fixed. So remove the EXPERIMENTAL tag
from the Kconfig option selecting it, and adapt the documentation
accordingly to encourage users to switch to it.
Impact: documentation/status update, no functional change
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add a paragraph to the driver documentation describing how to make
internal and external calls.
Impact: documentation
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Mention that the CAPI controller methods load_firmware() and
reset_ctr() are asynchronous, and should signal completion.
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Clarify the non-support by isdnlog, and propose a better standard
debug mask.
Impact: Documentation
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Convert code away from ->read_proc/->write_proc interfaces. Switch to
proc_create()/proc_create_data() which make addition of proc entries
reliable wrt NULL ->proc_fops, NULL ->data and so on.
Problem with ->read_proc et al is described here commit
786d7e1612f0b0adb6046f19b906609e4fe8b1ba "Fix rmmod/read/write races in
/proc entries"
[[email protected]: CONFIG_PROC_FS=n build fix]
Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: Karsten Keil <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Various additions and improvements to the Gigaset driver's README
file, and added comments to its userspace visible include file.
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add a Kernel CAPI interface to the Gigaset driver.
Impact: optional new functionality
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
- Note that send_message() may be called in interrupt context.
- Describe the storage of CAPI messages and payload data in SKBs.
- Add more details to the description of the _cmsg structure.
- Describe kernelcapi debugging output.
Impact: documentation
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Remove duplicates, a stray merge conflict marker, and an entry for a file
which doesn't exist, and move one entry to its correct alphabetical place.
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Clarify calling context and return codes of callback methods, and
add a description of the _cmsg structure and helper functions.
Impact: documentation
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Change the name of the Kernel CAPI exported function capi_ctr_reseted()
to something representing its purpose better.
Impact: renaming, no functional change
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Drop the kernel config option GIGASET_UNDOCREQ, permanently
activating the code it controlled, as there have been no reports
of problems caused by its activation but many problems caused by
it being disabled.
Also fix a few bad comments while we're at it.
Impact: cleanup
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Mention handling of unregisteted DECT wireless datasets in README.gigaset.
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
Documentation/isdn/00-INDEX
drivers/net/wireless/iwlwifi/iwl-scan.c
drivers/net/wireless/rndis_wlan.c
net/mac80211/main.c
|
|
Move the entry about CAPI 2.0 to the beginning and add a URL.
Incorporate changes suggested by Randy Dunlap, thanks for proofreading.
Signed-off-by: Karsten Keil <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
isdn: document Kernel CAPI driver interface
Create a file Documentation/isdn/INTERFACE.CAPI describing the
interface between the kernel CAPI subsystem and ISDN device drivers,
analogous to the existing Documentation/isdn/INTERFACE for the old
isdn4linux subsystem. Also add kerneldoc comments to the exported
functions in drivers/isdn/capi/kcapi.c.
Impact: Documentation
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: Karsten Keil <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
After the merging of mISDN, state which files refer only to the
old isdn4linux subsystem. Also add a few missing files.
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: Karsten Keil <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
After the merging of mISDN, state which files refer only to the
old isdn4linux subsystem. Also add a few missing files and sort
alphabetically.
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Update, correct and clarify instructions for loading the driver
and for setting the UNDOCREQ kernel configuration option.
Impact: documentation
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Alan Cox <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
mISDN is a new modular ISDN driver, in the long term it should replace
the old I4L driver architecture for passiv ISDN cards.
Signed-off-by: Karsten Keil <[email protected]>
|
|
Spelling fixes in Documentation/.
Signed-off-by: Simon Arlott <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
|
|
* Convert files to UTF-8.
* Also correct some people's names
(one example is Eißfeldt, which was found in a source file.
Given that the author used an ß at all in a source file
indicates that the real name has in fact a 'ß' and not an 'ss',
which is commonly used as a substitute for 'ß' when limited to
7bit.)
* Correct town names (Goettingen -> Göttingen)
* Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313)
Signed-off-by: Jan Engelhardt <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
|
|
Convert files within the Documentation directory to UTF-8.
Adrian Bunk:
small additional fixes
Signed-off-by: John Anthony Kazos Jr. <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
|
|
This patch adds the line discipline based driver for the Gigaset M101
wireless RS232 adapter. It also improves the documentation a bit.
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: Hansjoerg Lipp <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Remove many duplicated words under Documentation/ and do other small
cleanups.
Examples:
"and and" --> "and"
"in in" --> "in"
"the the" --> "the"
"the the" --> "to the"
...
Signed-off-by: Paolo Ornati <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
|
|
Using the class device pointer returned by tty_register_device() with
part 1 of the patch, attach the Gigaset drivers' "cidmode" sysfs entry
to its tty class device, where it can be found more easily by users
who do not know nor care which USB port the device is attached to.
Signed-off-by: Hansjoerg Lipp <[email protected]>
Signed-off-by: Tilman Schmidt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
With Hansjoerg Lipp <[email protected]>
Add a README file for the Siemens Gigaset drivers to the Documentation/isdn
directory.
Signed-off-by: Hansjoerg Lipp <[email protected]>
Signed-off-by: Tilman Schmidt <[email protected]>
Cc: Karsten Keil <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
|