aboutsummaryrefslogtreecommitdiff
path: root/Documentation/i2c
AgeCommit message (Collapse)AuthorFilesLines
2024-08-26i2c: testunit: add SMBusAlert triggerWolfram Sang1-0/+48
To test SMBusAlert handlers, let the testunit be able to trigger SMBusAlert interrupts. This new command needs a GPIO connected to the SMBAlert# line. Signed-off-by: Wolfram Sang <[email protected]>
2024-08-26i2c: testunit: describe fwnode based instantiationWolfram Sang1-0/+12
The testunit can also be instantiated via firmware nodes. Give a devicetree node as an example. Signed-off-by: Wolfram Sang <[email protected]>
2024-08-14i2c: testunit: return current command on read messagesWolfram Sang1-6/+8
Because the testunit can start tests in the future via the DELAY register, it may happen that a command is still pending. Support detecting that by returning the number of a command in progress (if there is one). Signed-off-by: Wolfram Sang <[email protected]>
2024-08-14i2c: testunit: add command to support versioning and test rep_startWolfram Sang1-0/+38
For some devices, it is essential that controllers handle repeated start correctly and do not replace it with a stop/start combination. This addition helps to test that because it will only return a version string if repeated start is done properly. Signed-off-by: Wolfram Sang <[email protected]>
2024-08-14i2c: testunit: use decimal values in docs when appropriateWolfram Sang1-5/+5
Sometimes decimal values are just shorter (like for cmds), sometimes they are even easier to understand (like for the delay value). Make use of them. Signed-off-by: Wolfram Sang <[email protected]>
2024-07-13Merge tag 'i2c-host-6.11' of ↵Wolfram Sang1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow This release includes significant updates, with the primary change being the renaming from "master/slave" to "controller/target" to adhere to I2C v7 and SMBus 3.2 standards. New Support: - Added support for Intel Arrow Lake-H. - Added I2C support in the Arioha SoC by linking the Mediatek I2C controller. Cleanups: - Added the MODULE_DESCRIPTION() macro, resolving a modpost warning in the ALi 1563 Southbridge driver. - Constified the regmap_config declaration in the i2c-designware driver. - Improved the coding style in the Renesas R-Car driver by removing unnecessary semicolons after brackets. General improvements: - In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with RUNTIME_PM_OPS to enable waking up the controller during suspend() before suspend_noirq() kicks in. - Improved logging in the Xilinx driver. - Added a warning (WARN()) in the Renesas R-Car driver for spurious interrupts. DTS Changes: - Removed address-cell and size-cell from the Atmel at91sam, nVidia Tegra 20, and Samsung S3c2410 devices. - Fixed Texas Instruments OMAP4 I2C controller to comply with the i2c-controller.yaml schema. - Improved indentation in DTS examples for several I2C devices. - Converted the NXP LPC1788 binding to the dt-schema. - Added documentation for the compatible string thead,th1520-i2c. - Added the "power-domains" property for the Meson I2C driver.
2024-07-10i2c: add debug message for detected HostNotify alertsWolfram Sang1-0/+5
Setting up HostNotify can be tricky. Support debugging by stating when a HostNotify alert was received independent of the irq being mapped. Especially useful with the in-kernel i2c testunit. Update documentation as well. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Andi Shyti <[email protected]>
2024-07-09i2c: i801: Add support for Intel Arrow Lake-HJarkko Nikula1-0/+1
Add SMBus PCI ID on Intel Arrow Lake-H. Signed-off-by: Jarkko Nikula <[email protected]> Signed-off-by: Andi Shyti <[email protected]>
2024-06-26Documentation: i2c: testunit: use proper reSTWolfram Sang1-40/+82
This document is hardly readable when converted to HTML. Mark code sections as such and use tables to improve readability a lot. Some content has slightly been moved around, but no significant changes were made. Signed-off-by: Wolfram Sang <[email protected]>
2024-06-22docs: i2c: summary: be clearer with 'controller/target' and 'adapter/client' ↵Wolfram Sang1-17/+24
pairs This not only includes rewording, but also where to put which emphasis on terms in this document. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Easwar Hariharan <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2024-06-22docs: i2c: summary: document 'local' and 'remote' targetsWolfram Sang1-4/+9
Because Linux can be a target as well, add terminology to differentiate between Linux being the target and Linux accessing targets. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Easwar Hariharan <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2024-06-22docs: i2c: summary: document use of inclusive languageWolfram Sang2-13/+25
We now have the updated I2C specs and our own Code of Conduct, so we have all we need to switch over to the inclusive terminology. Define them here. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Easwar Hariharan <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2024-06-22docs: i2c: summary: update speed mode descriptionWolfram Sang1-2/+2
Fastest I2C mode is 5 MHz. Update the docs and reword the paragraph slightly. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Easwar Hariharan <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2024-06-22docs: i2c: summary: update I2C specification linkWolfram Sang1-5/+3
Luckily, the specs are directly downloadable again, so update the link. Also update its title to the original name "I²C". Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Easwar Hariharan <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2024-06-22docs: i2c: summary: start sentences consistently.Wolfram Sang1-6/+6
Change the first paragraphs to contain only one space after the end of the previous sentence like in the rest of the document. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Easwar Hariharan <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2024-03-07Documentation: i2c: Document that client auto-detection is a legacy mechanismHeiner Kallweit1-28/+4
Class-based client auto-detection has been considered a legacy mechanism for 10 yrs now. See commit 0c176170089c ("i2c: add deprecation warning for class based instantiation"). Change the documentation of how to write an i2c client accordingly. Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2023-12-27Documentation/i2c: fix spelling error in i2c-address-translatorsAttreyee Mukherjee1-1/+1
Correct to "stretched" from "streched" in "keeps clock streched on bus A waiting for reply". Signed-off-by: Attreyee Mukherjee <[email protected]> Acked-by: Randy Dunlap <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2023-10-29Documentation: i2c: add fault code for not supporting 10 bit addressesWolfram Sang1-0/+4
Document the specific fault code when 10 bit addresses cannot be supported. It is used for years, only the documentation slipped through the cracks. Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2023-10-10i2c: i801: Add support for Intel Birch Stream SoCJarkko Nikula1-0/+1
Add SMBus PCI ID on Intel Birch Stream SoC. Signed-off-by: Jarkko Nikula <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Reviewed-by: Jean Delvare <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2023-09-01Merge tag 'media/v6.6-1' of ↵Linus Torvalds2-0/+97
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913 - new Intel IVSC MEI drivers - some Mediatek platform drivers were moved to a common location - Intel atomisp2 driver is now working with the main ov2680 driver. Due to that, the atomisp2 ov2680 staging one was removed - the bttv driver was finally converted to videobuf2 framework. This was the last one upstream using videobuf version 1 core. We'll likely remove the old videobuf framework on 6.7 - lots of improvements at atomisp driver: it now works with normal I2C sensors. Several compile-mode dependecies to select between ISP2400 and ISP2401 are now solved in runtime - a new ipu-bridge logic was added to work with IVSC MEI drivers - venus driver gained better support for new VPU versions - the v4l core async framework has gained lots of improvements and cleanups - lots of other cleanups, improvements and driver fixes * tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits) media: ivsc: Add ACPI dependency media: bttv: convert to vb2 media: bttv: use audio defaults for winfast2000 media: bttv: refactor bttv_set_dma() media: bttv: move vbi_skip/vbi_count out of buffer media: bttv: remove crop info from bttv_buffer media: bttv: remove tvnorm field from bttv_buffer media: bttv: remove format field from bttv_buffer media: bttv: move do_crop flag out of bttv_fh media: bttv: copy vbi_fmt from bttv_fh media: bttv: copy vid fmt/width/height from fh media: bttv: radio use v4l2_fh instead of bttv_fh media: bttv: replace BUG with WARN_ON media: bttv: use video_drvdata to get bttv media: i2c: rdacm21: Fix uninitialized value media: coda: Remove duplicated include media: vivid: fix the racy dev->radio_tx_rds_owner media: i2c: ccs: Check rules is non-NULL media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate media: i2c: ds90ub953: Fix use of uninitialized variables ...
2023-08-14i2c: Update documentation to use .probe() againUwe Kleine-König1-1/+1
Since commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") .probe() is the recommended callback to implement (again). Reflect this in the documentation and don't mention .probe_new() any more. Signed-off-by: Uwe Kleine-König <[email protected]> Reviewed-by: Jean Delvare <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2023-07-14media: i2c: add I2C Address Translator (ATR) supportLuca Ceresoli2-0/+97
An ATR is a device that looks similar to an i2c-mux: it has an I2C slave "upstream" port and N master "downstream" ports, and forwards transactions from upstream to the appropriate downstream port. But it is different in that the forwarded transaction has a different slave address. The address used on the upstream bus is called the "alias" and is (potentially) different from the physical slave address of the downstream chip. Add a helper file (just like i2c-mux.c for a mux or switch) to allow implementing ATR features in a device driver. The helper takes care of adapter creation/destruction and translates addresses at each transaction. Signed-off-by: Luca Ceresoli <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Acked-by: Wolfram Sang <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-06-05i2c: i801: Add support for Intel Meteor Lake PCH-SJarkko Nikula1-1/+1
Add SMBus PCI ID on Intel Meteor Lake PCH-S. Signed-off-by: Jarkko Nikula <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Reviewed-by: Jean Delvare <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2023-02-15Documentation: i2c: correct spellingRandy Dunlap2-2/+2
Correct spelling problems for Documentation/i2c/ as reported by codespell. Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-09-28docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTEDQuan Nguyen1-3/+6
In case backend is not ready, ie: fail to wakeup or initialization, on the returning of the I2C_SLAVE_WRITE_REQUESTED event, bus driver should aware the backend status and might auto sending NACK on the next incoming bytes for I2C master to retry. Signed-off-by: Quan Nguyen <[email protected]> Links:https://lore.kernel.org/linux-arm-kernel/[email protected]/ [wsa: made some wording more precise] Signed-off-by: Wolfram Sang <[email protected]>
2022-09-27Merge branch 'master' into i2c/for-mergewindowWolfram Sang3-6/+6
2022-09-16Documentation: i2c: fix references to other documentsWolfram Sang3-6/+6
Similar to commit fe99b819487d ("docs: i2c: i2c-sysfs: fix hyperlinks"), make other links in documentation consistent with the preferred way. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Luca Ceresoli <[email protected]> Tested-by: Luca Ceresoli <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-09-16Merge tag 'v6.0-rc5' into i2c/for-mergewindowWolfram Sang2-107/+120
Linux 6.0-rc5
2022-08-29docs: i2c: piix4: Fix typos, add markup, drop linkBruce Duncan1-8/+5
[JD: Update the subject One more typo fixed Drop the link to lm-sensors' README, it's irrelevant] Signed-off-by: Bruce Duncan <[email protected]> Reviewed-by: Jean Delvare <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-08-29docs: i2c: i2c-topology: reorder sections more logicallyLuca Ceresoli1-97/+114
The sequence of sections is a bit confusing here: * we list the mux locking scheme for existing drivers before introducing what mux locking schemes are * we list the caveats for each locking scheme (which are tricky) before the example of the simple use case Restructure it entirely with the following logic: * Intro ("I2C muxes and complex topologies") * Locking - mux-locked - example - caveats - parent-locked - example - caveats * Complex examples * Mux type of existing device drivers While there, also apply some other improvements: * convert the caveat list from a table (with only one column carrying content) to a bullet list. * add a small introductory text to bridge the gap from listing the use cases to telling about the hardware components to handle them and then the device drivers that implement those. * make empty lines usage more uniform Signed-off-by: Luca Ceresoli <[email protected]> Acked-by: Peter Rosin <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-08-29docs: i2c: i2c-topology: fix incorrect headingLuca Ceresoli1-3/+2
"Etc" here was never meant to be a heading, it became one while converting to ReST. It would be easy to just convert it to plain text, but rather remove it and add an introductory text before the list that conveys the same meaning but with a better reading flow. Fixes: ccf988b66d69 ("docs: i2c: convert to ReST and add to driver-api bookset") Signed-off-by: Luca Ceresoli <[email protected]> Acked-by: Peter Rosin <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-08-29docs: i2c: i2c-topology: fix typoLuca Ceresoli1-1/+1
"intension" should have probably been "intention", however "intent" seems even better. Reported-by: Bagas Sanjaya <[email protected]> Signed-off-by: Luca Ceresoli <[email protected]> Acked-by: Peter Rosin <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König1-1/+1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <[email protected]> Reviewed-by: Jeremy Kerr <[email protected]> Reviewed-by: Benjamin Mugnier <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Crt Mori <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Acked-by: Marek Behún <[email protected]> # for leds-turris-omnia Acked-by: Andy Shevchenko <[email protected]> Reviewed-by: Petr Machata <[email protected]> # for mlxsw Reviewed-by: Maximilian Luz <[email protected]> # for surface3_power Acked-by: Srinivas Pandruvada <[email protected]> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <[email protected]> # for media/* + staging/media/* Acked-by: Miguel Ojeda <[email protected]> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <[email protected]> # for versaclock5 Reviewed-by: Ajay Gupta <[email protected]> # for ucsi_ccg Acked-by: Jonathan Cameron <[email protected]> # for iio Acked-by: Peter Rosin <[email protected]> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <[email protected]> # for lontium-lt8912b Reviewed-by: Jean Delvare <[email protected]> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <[email protected]> # for IPMI Reviewed-by: Vladimir Oltean <[email protected]> Acked-by: Dmitry Torokhov <[email protected]> Acked-by: Sebastian Reichel <[email protected]> # for drivers/power Acked-by: Krzysztof Hałasa <[email protected]> Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-08-11docs: i2c: i2c-sysfs: fix hyperlinksLuca Ceresoli1-11/+4
dts files cannot be linked conveniently, thus replace them with literal formatting. The links to other rst pages are broken, fix them using the proper syntax. Fixes: 31df7195b100 ("Documentation: i2c: Add doc for I2C sysfs") Signed-off-by: Luca Ceresoli <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-08-11docs: i2c: i2c-sysfs: improve wordingLuca Ceresoli1-5/+4
Improve wording in a couple sentences. Signed-off-by: Luca Ceresoli <[email protected]> [wsa: improved a little more] Signed-off-by: Wolfram Sang <[email protected]>
2022-08-11docs: i2c: instantiating-devices: add syntax coloring to dts and C blocksLuca Ceresoli1-4/+12
These blocks can be nicely coloured via Sphinx. Signed-off-by: Luca Ceresoli <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-08-11docs: i2c: smbus-protocol: improve DataLow/DataHigh definitionLuca Ceresoli1-2/+2
Use a more professional wording. Signed-off-by: Luca Ceresoli <[email protected]> Reviewed-by: Bagas Sanjaya <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-08-11docs: i2c: i2c-protocol: remove unused legend itemsLuca Ceresoli1-5/+1
"Comm", "Count", "DataLow", "DataHigh" are not used in this section. Signed-off-by: Luca Ceresoli <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-08-11docs: i2c: i2c-protocol,smbus-protocol: remove nonsense wordsLuca Ceresoli2-2/+2
"as usual" does not mean much here, especially as these are introductory sections and 10-bit addressing hasn't been introduced yet. Signed-off-by: Luca Ceresoli <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-08-11docs: i2c: i2c-protocol: update introductory paragraphLuca Ceresoli1-1/+2
This sentence dates back to the pre-git era and it does not look very professional... As there is no clear definition of "finished", and given this page is already a pretty good overview, not to mention it is not the kernel responsibility to document the protocol in detail, let's update the text accordingly. Signed-off-by: Luca Ceresoli <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-07-06i2c: i801: Add support for Intel Meteor Lake-PJarkko Nikula1-0/+1
Add SMBus PCI ID on Intel Meteor Lake-P. Signed-off-by: Jarkko Nikula <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Jean Delvare <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-05-04docs: i2c: reference simple probesStephen Kitt1-5/+8
Instead of documenting old-style probes, reference "simple probes" and document the i2c_match_id function. This might help reduce the use of two-argument probes in new code. Signed-off-by: Stephen Kitt <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-02-15i2c: i801: Add support for Intel Raptor Lake PCH-SJarkko Nikula1-0/+1
Add SMBus PCI ID on Intel Raptor Lake PCH-S. Signed-off-by: Jarkko Nikula <[email protected]> Reviewed-by: Jean Delvare <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2021-12-31Docs: Fixes link to I2C specificationDeep Majumder1-3/+5
The link to the I2C specification is broken. Although "https://www.nxp.com" hosts Rev 7 (2021) of this specification, it is behind a login-wall. Thus, an additional link has been added (which doesn't require a login) and the NXP official docs link has been updated. Signed-off-by: Deep Majumder <[email protected]> [wsa: minor updates to text and commit message] Signed-off-by: Wolfram Sang <[email protected]>
2021-11-23docs: i2c: smbus-protocol: mention the repeated start conditionMiquel Raynal1-6/+8
Sr is a repeated start, it is used in both I2C and SMBus protocols. Provide its description and replace start ("S") conditions with repeated start ("Sr") conditions when relevant. This allows the documentation to match the SMBus specification available at [1]. [1] http://www.smbus.org/specs/SMBus_3_1_20180319.pdf Signed-off-by: Miquel Raynal <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2021-08-10Documentation: i2c: add i2c-sysfs into indexHu Haowen1-0/+1
Append i2c-sysfs to toctree in order to get rid of building warnings. Fixes: 31df7195b100 ("Documentation: i2c: Add doc for I2C sysfs") Signed-off-by: Hu Haowen <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2021-07-04Merge branch 'i2c/for-mergewindow' of ↵Linus Torvalds1-0/+395
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - core supports now bus regulators controlling power for SCL/SDA - quite some DT binding conversions to YAML - added a seperate DT binding for the optional SMBus Alert feature - documentation with examples how to deal with I2C sysfs files - some bigger rework for the i801 driver - and a few usual driver updates * 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (42 commits) i2c: ali1535: mention that the device should not be disabled i2c: mpc: Restore reread of I2C status register i2c: core-smbus: Expose PEC calculate function for generic use Documentation: i2c: Add doc for I2C sysfs i2c: core: Disable client irq on reboot/shutdown dt-bindings: i2c: update bindings for MT8195 SoC i2c: imx: Fix some checkpatch warnings i2c: davinci: Simplify with dev_err_probe() i2c: cadence: Simplify with dev_err_probe() i2c: xiic: Simplify with dev_err_probe() i2c: cadence: Clear HOLD bit before xfer_size register rolls over dt-bindings: i2c: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575" i2c: i801: Improve i801_setup_hstcfg i2c: i801: Use driver name constant instead of function dev_driver_string i2c: i801: Simplify initialization of i2c_board_info in i801_probe_optional_slaves i2c: i801: Improve status polling i2c: cht-wc: Replace of_node by NULL i2c: riic: Add RZ/G2L support dt-bindings: i2c: renesas,riic: Document RZ/G2L I2C controller dt-bindings: i2c: renesas,iic: Convert to json-schema ...
2021-06-25Documentation: i2c: Add doc for I2C sysfsAlex Qiu1-0/+395
This doc helps Linux users navigate through I2C sysfs and learn the system I2C topology. Signed-off-by: Alex Qiu <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2021-06-17docs: i2c: avoid using ReST :doc:`foo` markupMauro Carvalho Chehab3-4/+5
The :doc:`foo` tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:`foo`. Acked-by: Wolfram Sang <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Link: https://lore.kernel.org/r/569722e3f7d73d746c145ea78d2b4fbe5defee90.1623824363.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <[email protected]>
2021-02-12i2c: testunit: add support for block process callsWolfram Sang1-2/+21
Devices offering SMBus block process calls are rare, so add it to the testunit. This is also a good test case for testing proper I2C_M_RECV_LEN flag handling of I2C bus masters emulating SMBus. Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.