| Age | Commit message (Collapse) | Author | Files | Lines |
|
There are several documentation stuff under Documentation/dvb.
Move them to Documentation/media/dvb-drivers and rename them to
rst, as they'll soon be converted to rst files.
No changes at the documentation.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Soon my dibcom.fr/parrot.com-address won't respond anymore.
Thus I'm replacing it. And, while being at it,
let's adapt some other (old) email-addresses as well.
Signed-off-by: Patrick Boettcher <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
While https was always supported on linuxtv.org, only in
Dec 3 2015 the website is using valid certificates.
As we're planning to drop pure http support on some
future, change all references at the media subsystem
to point to the https URL instead.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
IT9135 firmware update.
Signed-off-by: Bimow Chen <[email protected]>
Signed-off-by: Antti Palosaari <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
We don't have license to redistribute this firmware, so extract
it from the driver, and add the needed headers.
Signed-off-by: Matthias Schwarzott <[email protected]>
Tested-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Linux 3.14-rc5
* tag 'v3.14-rc5': (1117 commits)
Linux 3.14-rc5
drm/vmwgfx: avoid null pointer dereference at failure paths
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
drm/vmwgfx: Remove some unused surface formats
MAINTAINERS: add maintainer entry for Armada DRM driver
arm64: Fix !CONFIG_SMP kernel build
arm64: mm: Add double logical invert to pte accessors
dm cache: fix truncation bug when mapping I/O to >2TB fast device
perf tools: Fix strict alias issue for find_first_bit
powerpc/powernv: Fix indirect XSCOM unmangling
powerpc/powernv: Fix opal_xscom_{read,write} prototype
powerpc/powernv: Refactor PHB diag-data dump
powerpc/powernv: Dump PHB diag-data immediately
powerpc: Increase stack redzone for 64-bit userspace to 512 bytes
powerpc/ftrace: bugfix for test_24bit_addr
powerpc/crashdump : Fix page frame number check in copy_oldmem_page
powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly
kvm, vmx: Really fix lazy FPU on nested guest
perf tools: fix BFD detection on opensuse
drm/radeon: enable speaker allocation setup on dce3.2
...
|
|
Remove it9137 firmware files it9137.txt and it9137 get_dvb_firmware.
dvb-usb-it9137-01.fw firmware is no longer in use.
Signed-off-by: Malcolm Priestley <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
I am no longer available at the kernellabs.com or m1k.net email
addresses. Update each instance of my email to my linuxtv.org
account.
Signed-off-by: Michael Krufky <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Fix firmware download for the Terratec Cinergy HTC Stick HD. The file
was moved on the server.
Signed-off-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add an entry to download the dvb-usb-vp7049-0.95.fw firmware for the
Twinhan vp7049 and similar devices.
Known devices of this kind are:
Twinhan/Azurewave DTV-DVB UDTT7049
Digicom Digitune-S
Think Xtra Hollywood DVB-T USB2.0
Signed-off-by: Antonio Ospite <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The previous website doesn't exist anymore. Update it to one site that
actually exists.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
As media/dvb will be removed, move it to a proper place.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"This is the first part of the media patches for v3.6.
This patch series contain:
- new DVB frontend: rtl2832
- new video drivers: adv7393
- some unused files got removed
- a selection API cleanup between V4L2 and V4L2 subdev API's
- a major redesign at v4l-ioctl2, in order to clean it up
- several driver fixes and improvements."
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (174 commits)
v4l: Export v4l2-common.h in include/linux/Kbuild
media: Revert "[media] Terratec Cinergy S2 USB HD Rev.2"
[media] media: Use pr_info not homegrown pr_reg macro
[media] Terratec Cinergy S2 USB HD Rev.2
[media] v4l: Correct conflicting V4L2 subdev selection API documentation
[media] Feature removal: V4L2 selections API target and flag definitions
[media] v4l: Unify selection flags documentation
[media] v4l: Unify selection flags
[media] v4l: Common documentation for selection targets
[media] v4l: Unify selection targets across V4L2 and V4L2 subdev interfaces
[media] v4l: Remove "_ACTUAL" from subdev selection API target definition names
[media] V4L: Remove "_ACTIVE" from the selection target name definitions
[media] media: dvb-usb: print mac address via native %pM
[media] s5p-tv: Use module_i2c_driver in sii9234_drv.c file
[media] media: gpio-ir-recv: add allowed_protos for platform data
[media] s5p-jpeg: Use module_platform_driver in jpeg-core.c file
[media] saa7134: fix spelling of detach in label
[media] cx88-blackbird: replace ioctl by unlocked_ioctl
[media] cx88: don't use current_norm
[media] cx88: fix a number of v4l2-compliance violations
...
|
|
The firmwares are there at the same place for a long time. However,
each time I need to remember where it is, I need to seek at the net.
The better is to just add a logic at the get_dvb_firmare script,
in order to obtain it from a reliable source.
Cc: Steven Toth <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Stick HD's firmware
As of June 2012 it uses the same firmware as the Hauppauge WinTV HVR 930C.
Signed-off-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- some V4L2 API updates needed by embedded devices
- DVB API extensions for ATSC-MH delivery system, used in US for mobile
TV
- new tuners for fc0011/0012/0013 and tua9001
- a new dvb driver for af9033/9035
- a new ATSC-MH frontend (lg2160)
- new remote controller keymaps
- Removal of a few legacy webcam driver that got replaced by gspca on
several kernel versions ago
- a new driver for Exynos 4/5 webcams(s5pp fimc-lite)
- a new webcam sensor driver (smiapp)
- a new video input driver for embedded (sta2x1xx)
- several improvements, fixes, cleanups, etc inside the drivers.
Manually fix up conflicts due to err() -> dev_err() conversion in
drivers/staging/media/easycap/easycap_main.c
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (484 commits)
[media] saa7134-cards: Remove a PCI entry added by mistake
[media] radio-sf16fmi: add support for SF16-FMD
[media] rc-loopback: remove duplicate line
[media] patch for Asus My Cinema PS3-100 (1043:48cd)
[media] au0828: Move the Kconfig knob under V4L_USB_DRIVERS
[media] em28xx: simple comment fix
[media] [resend] radio-sf16fmr2: add PnP support for SF16-FMD2
[media] smiapp: Use v4l2_ctrl_new_int_menu() instead of v4l2_ctrl_new_custom()
[media] smiapp: Add support for 8-bit uncompressed formats
[media] smiapp: Allow generic quirk registers
[media] smiapp: Use non-binning limits if the binning limit is zero
[media] smiapp: Initialise rval in smiapp_read_nvm()
[media] smiapp: Round minimum pre_pll up rather than down in ip_clk_freq check
[media] smiapp: Use 8-bit reads only before identifying the sensor
[media] smiapp: Quirk for sensors that only do 8-bit reads
[media] smiapp: Pass struct sensor to register writing commands instead of i2c_client
[media] smiapp: Allow using external clock from the clock framework
[media] zl10353: change .read_snr() to report SNR as a 0.1 dB
[media] media: add support to gspca/pac7302.c for 093a:2627 (Genius FaceCam 300)
[media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th try
...
|
|
Firmware for the PCTV QuatroStick nano (520e).
Signed-off-by: Antti Palosaari <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Correct multiple spelling typo in Documentation.
Signed-off-by: Masanari Iida <[email protected]>
Acked-by: Rob Landley <[email protected]>
Reported-by: Anders Larsen <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Signed-off-by: Malcolm Priestley <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
[[email protected]: CodingStyle fixes]
Signed-off-by: Kyle Strickland <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Changes to extract firmware for it913x devices
./get_dvb_firmware it9135
extracts
dvb-usb-it9135-01.fw
dvb-usb-it9135-02.fw
./get_dvb_firmware it9137
extracts
dvb-usb-it9137-01.fw
Signed-off-by: Malcolm Priestley <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Signed-off-by: Eddi De Pieri <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Signed-off-by: Renzo Dani <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
it9135 was the only one intended with spaces as others are tabs.
Signed-off-by: Antti Palosaari <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Signed-off-by: Antti Palosaari <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
TDA10071 firmware version 1.21.31.2
Signed-off-by: Antti Palosaari <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Signed-off-by: Benjamin Larsson <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
1b80:e409)
Firmware information for Kworld UB499-2T T09 based on IT913x series. This device
uses file dvb-usb-it9137-01.fw.
Signed-off-by: Malcolm Priestley <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Use a name convention for the firmware file that matches on the
current firmware namespacing. Also, add it to the firmware
download script.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Get DRX-K firmware for Digital Devices DVB-CT cards
Signed-off-by: Oliver Endriss <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
Fix common misspellings
|
|
Fix some minor typos:
* informations => information
* there own => their own
* these => this
Signed-off-by: Sylvestre Ledru <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
DM04 LME2510(C) Sharp BS2F7HZ0194 Firmware Information
Signed-off-by: Malcolm Priestley <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add download link for ngene firmware rev 18.
Signed-off-by: Oliver Endriss <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Corrected Firmware Information for LG on LME2510.
Signed-off-by: Malcolm Priestley <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
These include
-later kill of usb_buffer to avoid kernel crash on hot unplugging.
-DiSEqC functions.
-LNB Power switch
-Faster channel change.
-support for LG tuner on LME2510C.
-firmware switching for LG tuner.
Signed-off-by: Malcolm Priestley <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
DM04/QQBOX DVB-S USB BOX with LME2510C+SHARP:BS2F7HZ7395 or LME2510+LGTDQT-P001F tuner.
[[email protected]: Fix merge conflicts/compilation and CodingStyle issues]
Signed-off-by: Malcolm Priestley <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits)
Documentation: update broken web addresses.
fix comment typo "choosed" -> "chosen"
hostap:hostap_hw.c Fix typo in comment
Fix spelling contorller -> controller in comments
Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault
fs/Kconfig: Fix typo Userpace -> Userspace
Removing dead MACH_U300_BS26
drivers/infiniband: Remove unnecessary casts of private_data
fs/ocfs2: Remove unnecessary casts of private_data
libfc: use ARRAY_SIZE
scsi: bfa: use ARRAY_SIZE
drm: i915: use ARRAY_SIZE
drm: drm_edid: use ARRAY_SIZE
synclink: use ARRAY_SIZE
block: cciss: use ARRAY_SIZE
comment typo fixes: charater => character
fix comment typos concerning "challenge"
arm: plat-spear: fix typo in kerneldoc
reiserfs: typo comment fix
update email address
...
|
|
Below you will find an updated version from the original series bunching all patches into one big patch
updating broken web addresses that are located in Documentation/*
Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
Now there are also some addresses pointing to .spec files some are located, but some(after searching
on the companies site)where still no where to be found. In this case I just changed the address
to the company site this way the users can contact the company and they can locate them for the users.
Signed-off-by: Justin P. Mattock <[email protected]>
Signed-off-by: Thomas Weber <[email protected]>
Signed-off-by: Mike Frysinger <[email protected]>
Cc: Paulo Marques <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Michael Neuling <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
New driver contains new firmware 5.1.0.0. Fix script to get that.
Signed-off-by: Antti Palosaari <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Signed-off-by: Renzo Dani <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Fix obvious cases of "it's" being used when "its" was meant.
Signed-off-by: Francis Galiegue <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Commiter: Oliver Endriss <[email protected]>
Fix typo. Sort list of components for better readability.
Signed-off-by: Oliver Endriss <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Commiter: Oliver Endriss <[email protected]>
Use 'get_dvb_firmware ngene' to download 'ngene_15.fw' and 'ngene_17.fw'.
Signed-off-by: Oliver Endriss <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.
Signed-off-by: André Goddard Rosa <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
The patch does the following:
a. it synchronizes /Documentation/dvb/technisat.txt to the current kernel
design
b. it syncs Trent Piepho' s latest changes to the flexcop driver concept:
implementation of the dvb pll library for some cards that need it
Signed-off-by: Uwe Bugla <[email protected]>
Signed-off-by: Patrick Boettcher <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add af9015 firmware to get_dvb_firmware script.
Firmware version is 4.95.0.0.
Signed-off-by: Antti Palosaari <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
extraction logic
The extraction routine for the MPC718 "firmware" had 2 bugs in it, where one
bug masked the effect of the other. The loop iteration should have set
$prevlen = $currlen at the end of the loop, and the if() check should have used
&& instead of || for deciding if the firmware length is reasonable.
Signed-off-by: Andy Walls <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
extraction
Add routine to support extracting the MT352 DVB-T demodulator initialization
sequence for Yuan MPC718 cards for use by the cx18 driver.
This routine uses a hueristic for extracting a good sequence. It should work
on all different versions of the "yuanrap.sys" file, given the way the MT352
tuning sequences are stored in all versions of that file I have seen so far.
However, the current patch simply looks for one specific archive URL.
Signed-off-by: Andy Walls <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|