| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
An USB hub is not a HCD, but an USB device. Fix the referenced schema
accordingly.
Fixes: bfbf2e4b77e2 ("dt-bindings: usb: Document the Microchip USB2514 hub")
Cc: [email protected]
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Alexander Stein <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add missed binding doc for layerscape dwc3 usb controller.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb: /soc/usb@3100000:
failed to match any schema with compatible: ['fsl,ls1028a-dwc3', 'snps,dwc3']
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Commit a170a1e9ccc5 ("usb: phy: remove phy-msm-usb.c") removed the
device driver but left the corresponding documentation, delete it.
Signed-off-by: Masanori Ogino <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The X1E80100, just like its predecessors, has a Multiport controller.
This time around, 2 HS (eUSB) and 2 SS PHYs are attached.
Document it.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We need the usb fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Unlike MSM SoC, IPQ SoC doesn't use RPM to aggregate bandwidth
requests and scale the NoC frequency. The NoCs are turned on and
set to a specific frequency at boot time and that is used for the
lifetime of the system. Hence interconnect was not considered
previously.
The same approach was used for PCIe and at that point the
consensus was to move to interconnect. Hence implemented the ICC
driver and updating the existing USB driver to use the ICC
driver.
USB uses icc-clk framework to enable the NoC interface clock.
Hence the 'iface' clock is removed from the list of clocks.
Update the clock-names list accordingly.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Compatible can be A or B+A, not A or B or A+B. B got added afterwards,
we want B+A not A+B. A=ti,j721e-usb and B=ti,am64-usb.
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Théo Lebrun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
IPQ5332 has only three interrupts. Update the constraints
to fix the following dt_binding_check errors.
interrupt-names: ['pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
Fixes: 53c6d854be4e ("dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding")
Signed-off-by: Varadarajan Narayanan <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
USB2517 is a 7-port variant of this USB hub. Add an USB compatible
based on USB vendor & product ID.
Signed-off-by: Alexander Stein <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Convert fsl-usb binding doc to yaml format.
Additional change:
- Remove port0 and port1 from required list.
- Use common usb-drd.yaml for dr_mode property
- Keep two difference examples.
- Add interrupts to required property list.
- Remove #address-cells and #size-cells in example.
- Use predefined irq type macro.
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Define "unevaluatedProperties" instead of "additionalProperties"
to allow properties from common schemas but still disallow undefined
properties.
This allow defining a device subnode and fixes:
meson-gxbb-odroidc2.dtb: usb@c9100000: '#address-cells', '#size-cells', 'hub@1' do not match any of the regexes: 'p
inctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/usb/dwc2.yaml#
Fixes: bb88dbbee2c9 ("dt-bindings: usb: dwc2: Add reference to usb-drd.yaml")
Fixes: 54bd6c9a3b7b ("dt-bindings: usb: dwc2: document TPL support")
Signed-off-by: Neil Armstrong <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240624-topic-amlogic-upstream-bindings-fixes-dwc2-subnodes-v1-1-f2544f21f594@linaro.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add the binding example for the USB3.1 Genesys Logic GL3523
integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
hub.
For onboard hub controllers that support USB 3.x and USB 2.0 hubs
with shared resets and power supplies, this property is used to identify
the hubs with which these are shared.
GL3523 has built-in 5V to 3.3V and 5V to 1.2V regulators, which serves
power to the USB HUB, it uses 5V power regulator.
Update the peer-hub description.
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Anand Moon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add a compatible entry for the TI TMUXHS4212 GPIO-based
bidirectional 2:1 mux/1:2 demux which can be used for
switching orientation of the SBU lines in USB Type-C
applications.
TMUXHS4212 datasheet: https://www.ti.com/lit/ds/symlink/tmuxhs4212.pdf
Signed-off-by: Parth Pancholi <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The SC8180X platform has two single port DWC3 instances and a two-port
DWC3 instance. Add compatibles for these to the binding.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/20240610-sc8180x-dwc3-binding-compatible-v2-1-c7d5db9702a2@quicinc.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use common usb-drd yaml for usb OTG related propteries to fix below
DTB_CHECK warning.
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb: usb@5b110000: usb@5b120000: 'port', 'usb-role-switch' do not match any of the regexes: 'pinctrl-[0-9]+'
Add "port" proptery to use connect type C connector and fix below warning.
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb: usb@5b110000: usb@5b120000: Unevaluated properties are not allowed ('port' was unexpected)
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We need the USB / Thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The enable gpio is not required when the SBU mux is used only for
orientation, make enable-gpios required only for alternate mode
switch use case.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add a property to allow configuring the musb controller on PolarFire SoC
to use an external vbus for ULPI PHYs.
Signed-off-by: Conor Dooley <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/20240531-fountain-plating-1d3739422a26@wendy
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
child nodes
All nodes need an explicit additionalProperties or unevaluatedProperties
unless a $ref has one that's false. As that is not the case with
usb-device.yaml, "additionalProperties" is needed here.
Fixes: c44d9dab31d6 ("dt-bindings: usb: Add downstream facing ports to realtek binding")
Signed-off-by: "Rob Herring (Arm)" <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub
usb: fotg210: Add missing kernel doc description
usb: dwc3: core: Fix unused variable warning in core driver
usb: typec: tipd: rely on i2c_get_match_data()
usb: typec: tipd: fix event checking for tps6598x
usb: typec: tipd: fix event checking for tps25750
dt-bindings: usb: qcom,dwc3: fix interrupt max items
usb: fotg210: Use *-y instead of *-objs in Makefile
usb: phy: tegra: Replace of_gpio.h by proper one
usb: typec: ucsi: displayport: Fix potential deadlock
usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
usb: musc: Remove unused list 'buffers'
usb: dwc3: Wait unconditionally after issuing EndXfer command
usb: gadget: u_audio: Clear uac pointer when freed.
usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
dt-bindings: usb: dwc3: Add QDU1000 compatible
usb: core: Remove the useless struct usb_devmap which is just a bitmap
MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry
USB: usb_parse_endpoint: ignore reserved bits
usb: xhci: compact 'trb_in_td()' arguments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert samsung,exynos5-dp, atmel,lcdc, aspeed,ast2400-wdt bindings
to schemas
- Add bindings for Allwinner H616 NMI controller, Renesas r8a779g0
irqc, Renesas R-Car V4M TMU and CMT timers, Freescale S32G3
linflexuart, and Mediatek MT7988 XHCI
- Add 'reg' constraints on DSI and SPI display panels
- More dropping of unnecessary quotes in schemas
- Use full paths rather than relative paths in schema $refs
- Drop redundant storing of phandle for reserved memory
DT Core:
- Use scope based cleanups for kfree() and of_node_put()
- Track interrupt-map and power-supplies for fw_devlink
- Add buffer overflow check in of_modalias()
- Add and use __of_prop_free() helper for freeing struct property"
* tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits)
of: property: Add fw_devlink support for interrupt-map property
dt-bindings: display: panel: constrain 'reg' in DSI panels
dt-bindings: display: panel: constrain 'reg' in SPI panels
dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref
dt-bindings: Use full path to other schemas
dt-bindings: PCI: qcom,pcie-sm8350: Drop redundant 'oneOf' sub-schema
of: module: add buffer overflow check in of_modalias()
dt-bindings: PCI: microchip: increase number of items in ranges property
dt-bindings: Drop unnecessary quotes on keys
dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop unnecessary quotes
of: property: Use scope based cleanup on port_node
of: reserved_mem: Remove the use of phandle from the reserved_mem APIs
of: property: fw_devlink: Add support for "power-supplies" binding
dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
dt-bindings: irq: sun7i-nmi: Add binding for the H616 NMI controller
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779g0 support
dt-bindings: timer: renesas,tmu: Add R-Car V4M support
dt-bindings: timer: renesas,cmt: Add R-Car V4M support
of: Use scope based of_node_put() cleanups
of: Use scope based kfree() cleanups
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
|
|
A recent commit adding the SC8280XP multiport controller to the binding
failed to update the interrupt maxItems, which results it DT checker
warnings like:
arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dtb: usb@a4f8800: interrupts-extended: [[1, 0, 130, 4], [1, 0, 135, 4], [1, 0, 857, 4], [1, 0, 856, 4], [1, 0, 131, 4], [1, 0, 136, 4], [1, 0, 860, 4], [1, 0, 859, 4], [136, 127, 3], [136, 126, 3], [136, 129, 3], [136, 128, 3], [136, 131, 3], [136, 130, 3], [136, 133, 3], [136, 132, 3], [136, 16, 4], [136, 17, 4]] is too long
Fixes: 80adfb54044e ("dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport")
Reported-by: "Rob Herring (Arm)" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Cc: Krishna Kurapati <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Document the QDU1000 dwc3 compatible.
Signed-off-by: Komal Bajaj <[email protected]>
Acked-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The Exynos-based Google Tensor gs101 SoC has a DWC3 compatible USB
controller and can reuse the existing Exynos glue. Update the dt schema
to include the google,gs101-dwusb3 compatible for it.
Signed-off-by: André Draszik <[email protected]>
Reviewed-by: Peter Griffin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add the compatible string for SC8280 Multiport USB controller from
Qualcomm.
There are 4 power event interrupts supported by this controller
(one for each port of multiport controller). Add all the 4 as
non-optional interrupts for SC8280XP-MP
Also each port of multiport has one DP and one DM IRQ. Add all DP/DM
IRQs related to 4 ports of SC8280XP Teritiary controller.
Also added SuperSpeed PHY interrupt for both Superspeed ports.
Signed-off-by: Krishna Kurapati <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Tested-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add bindings to indicate properties required to support multiport
on Synopsys DWC3 controller.
Signed-off-by: Krishna Kurapati <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Tested-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Convert USB UHCI bindings to DT schema. Documenting aspeed compatibles
and missing properties. Adding aspeed/generic-uhci example and fixing
nodename for the original example.
Signed-off-by: Mohammad Shehar Yaar Tausif <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Update Qualcomm PMIC Type-C examples to follow the USB-C connector
schema. The USB-C connector should have three ports (USB HS @0,
SSTX/RX @1 and SBU @2 lanes). Reorder ports accordingly and add SBU port
connected to the SBU mux (e.g. FSA4480).
Reported-by: Luca Weiss <[email protected]>
Acked-by: Konrad Dybcio <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add "fsl,imx8ulp-usbmisc" compatible.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Xu Yang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
MT7988 SoC contains two on-SoC XHCI controllers. Add proper binding.
Signed-off-by: Rafał Miłecki <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
It is expected that the USB controller works in host mode
to have the USB hub operational.
Remove such unneeded property from the devicetree example.
Signed-off-by: Fabio Estevam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Document the Microchip USB2412, USB2417, and USB2514 USB hubs.
The existing usb251xb.yaml describes Microchip USB251x hubs that are
connected under I2C bus. Here, the hub is under the USB bus and use
the on-board-hub interface instead.
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).
Description of this property is added to all peripheral binding files of
the peripheral under the STM32 firewall controller. It allows an accurate
representation of the hardware, where various peripherals are connected
to a firewall bus. The firewall can then check the peripheral accesses
before allowing its device to probe.
Signed-off-by: Gatien Chevallier <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
|
|
restriction for imx93
The i.MX93 needs a wakup clock to work properly. This will add compatible
and restriction for i.MX93 platform.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Xu Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
clock and clock-names properties
Add restrictions for reg, interrupts, clock and clock-names properties
for imx Socs.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Xu Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
As more and more NXP i.MX chips come out, it becomes harder to maintain
ci-hdrc-usb2.yaml if more stuffs like property restrictions are added to
this file. This will separate i.MX parts out of ci-hdrc-usb2.yaml and add
a new schema for NXP ChipIdea USB2 Controller, also add a common schema.
1. Copy common ci-hdrc-usb2.yaml properties to a new shared
chipidea,usb2-common.yaml schema.
2. Move fsl,* compatible devices and imx spefific properties
to dedicated binding file chipidea,usb2-imx.yaml.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Xu Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The USBHS IP found on RZ/G2L SoCs only has 10 pipe buffers compared
to 16 pipe buffers on RZ/A2M. Document renesas,rzg2l-usbhs family
compatible to handle this difference for RZ/G2L family SoCs.
Signed-off-by: Biju Das <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add compatible string for the DWC2 IP which is used by
Sophgo CV18XX/SG2000 series SoC.
Signed-off-by: Inochi Amaoto <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/IA1PR20MB49530A43A81CF4B809DBC2F8BB352@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The PM6150 PMIC has the same Type-C register block as the PM8150B.
Define corresponding compatible string, having the qcom,pm8150b-vbus-reg
as a fallback.
Signed-off-by: Luca Weiss <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
of tiny changes and forward progress to support new hardware and
better support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues"
* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
phy: tegra: xusb: Add API to retrieve the port number of phy
USB: gadget: pxa27x_udc: Remove unused of_gpio.h
usb: gadget/snps_udc_plat: Remove unused of_gpio.h
usb: ohci-pxa27x: Remove unused of_gpio.h
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
usb: Clarify expected behavior of dev_bin_attrs_are_visible()
xhci: Allow RPM on the USB controller (1022:43f7) by default
usb: isp1760: remove SLAB_MEM_SPREAD flag usage
usb: misc: onboard_hub: use pointer consistently in the probe function
usb: gadget: fsl: Increase size of name buffer for endpoints
usb: gadget: fsl: Add of device table to enable module autoloading
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add generic tcpci fallback compatible
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
usb: core: Set connect_type of ports based on DT node
dt-bindings: usb: Add downstream facing ports to realtek binding
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
|
|
The NXP PTN5110 [1] is an TCPCI [2] compatible chip, so add the fallback
binding.
[1] https://www.nxp.com/docs/en/data-sheet/PTN5110.pdf
[2] https://www.usb.org/sites/default/files/documents/usb-port_controller_specification_rev2.0_v1.0_0.pdf
Signed-off-by: Marco Felsch <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add a graph with 4 output endpoints to this hub binding to support the
scenario where a downstream facing port is connected to a device that
isn't a connector or a USB device with a VID:PID. This will be used to
connect downstream facing ports to USB type-c switches so the USB
superspeed and high speed lanes can be put onto USB connectors.
Cc: Rob Herring <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Conor Dooley <[email protected]>
Cc: Matthias Kaehlcke <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Pin-yen Lin <[email protected]>
Cc: maciek swiech <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The TI USB8020B is a USB 3.0 hub controller with 2 ports.
This initial version of the binding only describes USB related aspects
of the USB8020B, it does not cover the option of connecting the controller
as an i2c slave.
Signed-off-by: Macpaul Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The binding references usb-connector.yaml schema, which lists all
allowed properties and ends with unevaluatedProperties:false, so we can
simplify analogix,anx7411 binding by dropping everything covered by
usb-connector.yaml.
Suggested-by: Pavel Machek <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Pavel Machek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Document the DWC3 controller used by Hi3798MV200.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Yang Xiwen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The PM4125 PMIC has the same Type-C register block as the PMI632.
Likewise it doesn't support USB Power Delivery. Define the compatible
for the TypeC block found on PM4125, using PMI632 as a compatible.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The correct interrupt name is 'hs_phy_irq' not 'hs_phY_irq'.
Signed-off-by: Gabor Juhos <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/20240220-dt-bindins-qcom-dwc3-fix-typo-v1-1-742bf6e49641@gmail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|