| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/[email protected]/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the
last one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to many
new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both on the
consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very low
number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom and renesas
chips"
* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
arm64: dts: mediatek: add audio support for mt8365-evk
arm64: dts: mediatek: add afe support for mt8365 SoC
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
arm64: dts: mediatek: mt8186: Add svs node
arm64: dts: mediatek: mt8186: Add power domain for DPI
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
arm64: dts: mt8183: add dpi node to mt8183
arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
arm64: dts: nuvoton: Add syscon to the system-management node
ARM: dts: Fix undocumented LM75 compatible nodes
arm64: dts: toshiba: Fix pl011 and pl022 clocks
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
...
|
|
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add device tree bindings for the Cirrus Logic EP93xx SoC.
Signed-off-by: Nikita Shubin <[email protected]>
Tested-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom SoCs Device Tree changes for 6.12,
please pull the following:
- Krzysztof documents the AVS monitor binding present on 2711 (Raspberry
Pi 4)
- Rafal updates the Broadcom Northstar DTS files to use the recent NVMEM
binding
- Artur factors the nodes between the BCM21664 and BCM23550 SoCs since
they are nearly identical
- Stefan converts the bcm2835-system-timer and bcm2836-l1-intc to a YAML
binding syntax
* tag 'arm-soc/for-6.12/devicetree' of https://github.com/Broadcom/stblinux:
dt-bindings: interrupt-controller: convert bcm2836-l1-intc to yaml
dt-bindings: timer: convert bcm2835-system-timer bindings to YAML
ARM: dts: bcm-mobile: Split out nodes used by both BCM21664 and BCM23550
ARM: dts: broadcom: bcm21664: Move chosen node into Garnet DTS
ARM: dts: broadcom: convert NVMEM content to layout syntax
dt-bindings: soc: bcm: document brcm,bcm2711-avs-monitor
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.12
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
* tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Allow QSEECOM on Surface Laptop 7 models
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM7325 compatible
soc: qcom: pd_mapper: Add SM7325 compatible
soc: qcom: socinfo: Add Soc IDs for SM7325 family
dt-bindings: arm: qcom,ids: Add IDs for SM7325 family
soc: qcom: socinfo: add QCS8275/QCS8300 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS8275/QCS8300
soc: qcom: smp2p: use scoped device node handling to simplify error paths
soc: qcom: pbs: use scoped device node handling to simplify error paths
soc: qcom: ocmem: use scoped device node handling to simplify error paths
soc: qcom: ice: use scoped device node handling to simplify error paths
soc: qcom: aoss: simplify with scoped for each OF child loop
soc: qcom: apr: simplify with scoped for each OF child loop
soc: qcom: smd-rpm: add qcom,smd-rpm compatible
dt-bindings: soc: qcom: smd-rpm: add generic compatibles
Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"
firmware: qcom: scm: Add multiple download mode support
firmware: qcom: scm: Refactor code to support multiple dload mode
soc: qcom: pd_mapper: Add more older platforms without domains
soc: qcom: pd_mapper: Add X1E80100
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.12
Generic Fixups/Cleanups:
- AM62, AM62A, AM64, AM65, AM62P: ESM node cleanups
- J784s4, J721s2, J721e, AM65: FSS (Flash subsystem) fixups for ranges
- j721e/j7200/j721s2/am68/am69 SK/SoM, IOT2050: Disable of R5F lockstep
- j721e/j7200/j721s2/am68/am69 reserve GP timers for firmware usage.
- Misc device tree warning fixups: Serdes simple-mfd fixes for
am654-serdes-ctrl; rename of gpio-hog nodes; mux-controller node names
SoC Specific features and Fixes:
New boards:
- AM67A/J722s based BeagleBoard.org Foundation's BeagleY-AI
AM62:
- Thermal throttling enabled
AM62A:
- Add E5010 JPEG encoder
AM62P:
- gpio-reserved ranges
- SK: drop cts/rts for wakeup_uart0 firmware console pinmux
J722s: (AM62P variant)
- IPC/Remote proc for C7x and R5F
- gpio-reserved ranges
- EVM: Add main_uart5 description and CAN support.
AM64x:
- adc description fixes for dtbs_check warnings
- tqma64xxl and phyboard-electra: Add PRUSS ICSSG capability
- CPSW Ethernet is now disabled by default at SoC level and enabled explicitly
at board level.
- USB property to add fall back to j721e
AM65x:
- IOT2050: Add overlays for M.2, add Eth phy LED description
- idk: Fixes for DMA causing dtbs_check warning, Add MCAN
J721e:
- SK and beagleboneai64: Fixes for inverted C6x carveouts
J721s2:
- AM68-SK: Fixes for mmc clkb internal mux, ospi partition for uboot.backup
alignment fixup.
J784s4:
- WDT clock ID fix.
- EVM: Use 4 lanes for PCIe0.
* tag 'ti-k3-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (57 commits)
arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communication
arm64: dts: ti: k3-j722s-main: Add R5F and C7x remote processor nodes
arm64: dts: ti: k3-am68-sk-som: Update Partition info for OSPI Flash
arm64: dts: ti: Add k3-am67a-beagley-ai
dt-bindings: arm: ti: Add BeagleY-AI
arm64: dts: ti: iot2050: Declare Ethernet PHY leds
arm64: dts: ti: k3-am65: Add ESM nodes
arm64: dts: ti: k3-am64: Add more ESM interrupt sources
arm64: dts: ti: k3-am62a: Add ESM nodes
arm64: dts: ti: k3-am62: Add comments to ESM nodes
arm64: dts: ti: k3-am62p: Fix ESM interrupt sources
arm64: dts: ti: k3-am62p: Remove 'reserved' status for ESM
arm64: dts: ti: k3-j721s2-evm-gesi-exp-board: Rename gpio-hog node name
arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names
arm64: dts: ti: k3-am654-idk: Fix dtbs_check warning in ICSSG dmas
arm64: dts: ti: k3-j784s4: Include entire FSS region in ranges
arm64: dts: ti: k3-j721s2: Include entire FSS region in ranges
arm64: dts: ti: k3-j721e: Include entire FSS region in ranges
arm64: dts: ti: k3-am65: Include entire FSS region in ranges
arm64: dts: ti: k3-am64: add USB fallback compatible to J721E
...
Link: https://lore.kernel.org/r/20240903155701.q7soxtplbkfofwxt@entering
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.12 (take two)
- Add support for Ethernet TSN and PCIe on the R-Car V4H SoC and the
White-Hawk (Single) development board,
- Add display support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVk
board,
- Add I2C support for the RZ/G3S SoC and the RZ/G3S SMARC EVK board,
- Add support for HDMI audio on the RZ/G2L and RZ/G2LC SMARC EVK
boards,
- Add initial support for the RZ/V2H(P) (R9A09G057) SoC and the RZ/V2H
EVK board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.12-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
arm64: dts: renesas: r8a779h0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779a0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779g0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779h0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779a0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779g0: Add family fallback for VIN IP
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable watchdog
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable OSTM, I2C, and SDHI
arm64: dts: renesas: r9a09g057: Add WDT0-WDT3 nodes
arm64: dts: renesas: r9a09g057: Add SDHI0-SDHI2 nodes
arm64: dts: renesas: r9a09g057: Add RIIC0-RIIC8 nodes
arm64: dts: renesas: r9a09g057: Add OSTM0-OSTM7 nodes
arm64: dts: renesas: Add initial DTS for RZ/V2H EVK board
arm64: dts: renesas: Add initial SoC DTSI for RZ/V2H(P) SoC
dt-bindings: soc: renesas: Document RZ/V2H EVK board
dt-bindings: clock: renesas: Document RZ/V2H(P) SoC CPG
arm64: dts: renesas: r9a07g043u11-smarc: Enable DU
arm64: dts: renesas: rzg2lc-smarc: Enable HDMI audio
arm64: dts: renesas: rzg2l-smarc: Enable HDMI audio
arm64: dts: renesas: r9a07g043u: Add DU node
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
A number of pin fixes for Puma, Rock-Pi-E and rk356x, and as it turns
out the VO0 and VO1 general register files are not identical as suggested
by their original compatible. As there are no users of those yet,
everybody agreed that we should fix the compatibles.
* tag 'v6.11-rockchip-dtsfixes' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
Link: https://lore.kernel.org/r/7602696.A5hrfCrGMc@diego
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.12
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC.
* tag 'renesas-dt-bindings-for-v6.12-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: reset: renesas: Document RZ/G2M v3.0 (r8a774a3) reset module
dt-bindings: power: renesas: Document RZ/G2M v3.0 (r8a774a3) SYSC binding
dt-bindings: soc: renesas: Document RZ/G2M v3.0 (r8a774a3) SoC
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
- A series from Hervé Codina that bring support for the newer version
of QMC (QUICC Multi-channel Controller) and TSA (Time Slots Assigner)
found on MPC 83xx micro-controllers.
- Misc changes for qbman freescale drivers for removing a redundant
warning and using iommu_paging_domain_alloc()
* tag 'soc_fsl-6.12-2' of https://github.com/chleroy/linux: (38 commits)
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
soc: fsl: cpm1: qmc: Introduce qmc_data structure
dt-bindings: soc: fsl: cpm_qe: Add QUICC Engine (QE) QMC controller
soc: fsl: cpm1: qmc: Add missing spinlock comment
soc: fsl: cpm1: qmc: Fix 'transmiter' typo
soc: fsl: cpm1: qmc: Remove unneeded parenthesis
soc: fsl: cpm1: qmc: Fix blank line and spaces
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Add support for the QMC (QUICC Multichannel Controller) available in
some PowerQUICC SoC that uses a QUICC Engine (QE) block such as MPC8321.
This QE QMC is similar to the CPM QMC except that it uses UCCs (Unified
Communication Controllers) instead of SCCs (Serial Communication
Controllers). Also, compared against the CPM QMC, this QE QMC does not
use a fixed area for the UCC/SCC parameters area but it uses a dynamic
area allocated and provided to the hardware at runtime.
Last point, the QE QMC can use a firmware to have the QMC working in
'soft-qmc' mode.
Signed-off-by: Herve Codina <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christophe Leroy <[email protected]>
|
|
Add support for the time slot assigner (TSA) available in some
PowerQUICC SoC that uses a QUICC Engine (QE) block such as MPC8321.
This QE TSA is similar to the CPM TSA except that it uses UCCs (Unified
Communication Controllers) instead of SCCs (Serial Communication
Controllers). Also, compared against the CPM TSA, this QE TSA can handle
up to 4 TDMs instead of 2 and allows to configure the logic level of
sync signals.
Signed-off-by: Herve Codina <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christophe Leroy <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers
rk3308 io-domains, and some default settings for bits in the general
register files for rk3128 and the new rk3576 soc.
* tag 'v6.12-rockchip-drivers-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: grf: Add rk3576 default GRF values
dt-bindings: soc: rockchip: Add rk3576 syscon compatibles
soc: rockchip: grf: Set RK3128's vpu main clock
soc: rockchip: io-domain: Add RK3308 IO voltage domains
dt-bindings: power: rockchip: Document RK3308 IO voltage domains
Link: https://lore.kernel.org/r/23316481.ssLaC8jLEa@diego
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.12
1. Improve Samsung USI (Universal Serial Interface) DT binding,
2. Cleanup old Samsung MFC TXT binding.
* tag 'samsung-drivers-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: media: s5p-mfc: Remove s5p-mfc.txt binding
dt-bindings: samsung: exynos-usi: add missing constraints
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Add "renesas,rzv2h-evk" which targets the Renesas RZ/V2H ("R9A09G057")
EVK board.
Signed-off-by: Lad Prabhakar <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
According to RK3588 TRM, VO0_GRF and VO1_GRF have a similar layout, but
definitely not an identical one, therefore sharing the compatible is not
really justified.
Since currently there is no user of this, hence no ABI break, let's fix
it by providing dedicated compatibles while deprecating the old one.
Reported-by: Conor Dooley <[email protected]>
Signed-off-by: Cristian Ciocaltea <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Add documentation for pa-stats node which is syscon regmap for
PA_STATS registers. This will be used to dump statistics maintained by
ICSSG firmware.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Roger Quadros <[email protected]>
Acked-by: Nishanth Menon <[email protected]>
Signed-off-by: MD Danish Anwar <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pull in fixes to apply further refactoring.
|
|
This node contains a child which is only probed if simple-mfd is in the
compatible list. Add this here.
Signed-off-by: Andrew Davis <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Add all syscon compatibles for RK3576.
Signed-off-by: Detlev Casanova <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for reg, clocks and clock-names.
Reviewed-by: Sam Protsenko <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
The SM7325 is the closest SoC to the QCM6490 and is also identical
to the SC7280. The SM7325 also requires both UCSI_NO_PARTNER_PDOS &
UCSI_DELAY_DEVICE_PDOS quirks.
Document the PMIC GLINK firmware interface on the SM7325 Platform
by using the QCM6490 bindings as fallback.
Signed-off-by: Danila Tikhonov <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Convert binding doc newwork.txt to yaml format.
HDLC part:
- Convert to "fsl,ucc-hdlc.yaml".
- Add missed reg and interrupt property.
- Update example to pass build.
ethernet part:
- Convert to net/fsl,cpm-enet.yaml
- Add 0x in example, which should be hex value
- Add ref to ethernet-controller.yaml
mdio part:
- Convert to net/fsl,cpm-mdio.yaml
- Add 0x in example, which should be hex value
- Add ref to mdio.yaml
Signed-off-by: Frank Li <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Add two generic compatibles to all smd-rpm devices, they follow the same
RPMSG protocol and are either accessed through the smd-edge or through
the glink-edge.
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Drop the RCPM consumer example from the binding (LPUART device node),
because:
1. Using phandles is typical syntax, thus explaining it is not needed in
the provider binding,
2. It has 'fsl,rcpm-wakeup' property which is not allowed by LPUART
binding so it causes dt_binding_check warning:
fsl,rcpm.example.dtb: serial@2950000: Unevaluated properties are not allowed ('fsl,rcpm-wakeup' was unexpected)
from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#
Alternatively, this property could be added to LPUART binding
(fsl-lpuart.yaml), but it looks like none of in-tree DTS use it.
Fixes: ad21e3840a88 ("dt-bindings: soc: fsl: Convert rcpm to yaml format")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Frank Li <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Add compatible string, fsl,ls1088a-isc, fsl,ls2080a-isc, fsl,lx2160a-isc.
Fix the below warning:
arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dtb: /soc/syscon@1f70000: failed to match any schema with compatible: ['fsl,ls2080a-isc', 'syscon']
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert dt-binding rcpm from txt to yaml format.
Add fsl,ls1028a-rcpm compatible string.
Additional changes:
- Add missed compatible string fsl,<chip>-rcpm.
- Remove map fsl,<chip>-rcpm to fsl,qoriq-rcpm-<version>.
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Document alreasdy used binding for Syscon / AVS monitor:
brcm,bcm2711-avs-monitor to fix dt_binding_check and dtbs_check warnings
like:
brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@7d5d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd']
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Florian Fainelli <[email protected]>
|
|
Use my @kernel.org address everywhere.
Signed-off-by: Konrad Dybcio <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Add SoC documentation for Renesas RZ/G2M v3.0 (a.k.a r8a774a3) SoC.
Signed-off-by: Oliver Rhodes <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support
- Samsung Exynos gs101 drd combo phy
- Qualcomm SC8180x USB uniphy, IPQ9574 QMP PCIe phy
- Airoha EN7581 PCIe phy
- Freescale i.MX8Q HSIO SerDes phy
- Starfive jh7110 dphy tx
Updates:
- Resume support for j721e-wiz driver
- Updates to Exynos usbdrd driver
- Support for optional power domains in g12a usb2-phy driver
- Debugfs support and updates to zynqmp driver"
* tag 'phy-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (56 commits)
phy: airoha: Add dtime and Rx AEQ IO registers
dt-bindings: phy: airoha: Add dtime and Rx AEQ IO registers
dt-bindings: phy: rockchip-emmc-phy: Convert to dtschema
dt-bindings: phy: qcom,qmp-usb: fix spelling error
phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS)
phy: exynos5-usbdrd: convert Vbus supplies to regulator_bulk
phy: exynos5-usbdrd: convert (phy) register access clock to clk_bulk
phy: exynos5-usbdrd: convert core clocks to clk_bulk
phy: exynos5-usbdrd: support isolating HS and SS ports independently
dt-bindings: phy: samsung,usb3-drd-phy: add gs101 compatible
phy: core: Fix documentation of of_phy_get
phy: starfive: Correct the dphy configure process
phy: zynqmp: Add debugfs support
phy: zynqmp: Take the phy mutex in xlate
phy: zynqmp: Only wait for PLL lock "primary" instances
phy: zynqmp: Store instance instead of type
phy: zynqmp: Enable reference clock correctly
phy: cadence-torrent: Check return value on register read
phy: Fix the cacography in phy-exynos5250-usb2.c
phy: phy-rockchip-samsung-hdptx: Select CONFIG_MFD_SYSCON
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- add support for Realtek RTL9302C
- add support for Mobileye EyeQ6H
- add support for Mobileye EyeQ OLB system controller
- improve r4k clocksource
- add mode for emulating ieee754 NAN2008
- rework for BMIPS CBR address handling
- fixes for Loongson 2K1000
- defconfig updates
- cleanups and fixes
* tag 'mips_6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (58 commits)
MIPS: config: Add ip30_defconfig
MIPS: config: lemote2f: Regenerate defconfig
MIPS: config: generic: Add board-litex
MIPS: config: Enable MSA and virtualization for MIPS64R6
MIPS: Fix fallback march for SB1
mips: dts: realtek: Add RTL9302C board
mips: generic: add fdt fixup for Realtek reference board
mips: select REALTEK_OTTO_TIMER for Realtek platforms
dt-bindings: interrupt-controller: realtek,rtl-intc: Add rtl9300-intc
dt-bindings: mips: realtek: Add rtl930x-soc compatible
dt-bindings: vendor-prefixes: Add Cameo Communications
mips: dts: realtek: add device_type property to cpu node
mips: dts: realtek: use "serial" instead of "uart" in node name
MIPS: Implement ieee754 NAN2008 emulation mode
MIPS: lantiq: improve USB initialization
MIPS: GIC: Generate redirect block accessors
MIPS: CPS: Add a couple of multi-cluster utility functions
MIPS: Octeron: remove source file executable bit
MAINTAINERS: Mobileye: add OLB drivers and dt-bindings
MIPS: mobileye: eyeq5: add OLB system-controller node
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface,
new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75
GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and
CSI-2 blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'"
* tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: timer: sprd-timer: convert to YAML
dt-bindings: incomplete-devices: document devices without bindings
dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43
dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node
dt-bindings: soc: fsl: cpm_qe: convert to yaml format
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: fsi: Document the AST2700 FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml
dt-bindings: soc: fsl: Convert q(b)man-* to yaml format
dt-bindings: misc: fsl,qoriq-mc: convert to yaml format
dt-bindings: drop stale Anson Huang from maintainers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
|
|
Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs
- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs
- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.
- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots
- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already
There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"
* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...
|
|
ls1028a has a reset module that includes reboot, reset control word, and
service processor control.
Add platform specific compatible string to fix the below warning.
syscon@1e60000: compatible: 'anyOf' conditional failed, one must be fixed:
['syscon'] is too short
'syscon' is not one of ['al,alpine-sysfabric-service', ...]
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert binding doc qe.txt to yaml format. Split it to
fsl,qe-firmware.yaml, fsl,qe-ic.yaml, fsl,qe-muram.yaml, fsl,qe-si.yaml
fsl,qe-siram.yaml, fsl,qe.yaml.
Additional Changes:
- Fix error in example.
- Change to low case for hex value.
- Remove fsl,qe-num-riscs and fsl,qe-snums from required list.
- Add #address-cell and #size-cell.
- Add interrupts description for qe-ic.
- Add compatible string fsl,ls1043-qe-si for fsl,qe-si.yaml
- Add compatible string fsl,ls1043-qe-siram for fsl,qe-siram.yaml
- Add child node for fsl,qe.yaml
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000: failed to match any schema with compatible: ['fsl,qe-muram', 'fsl,cpm-muram']
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000: failed to match any schema with compatible: ['fsl,qe-muram', 'fsl,cpm-muram']
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000/data-only@0: failed to match any schema with compatible: ['fsl,qe-muram-data', 'fsl,cpm-muram-data']
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: /soc/uqe@2400000: failed to match any schema with compatible: ['fsl,qe', 'simple-bus']
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000/data-only@0: failed to match any schema with compatible: ['fsl,qe-muram-data', 'fsl,cpm-muram-data']
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: /soc/uqe@2400000/qeic@80: failed to match any schema with compatible: ['fsl,qe-ic']
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert qman, bman, qman-portals, bman-portals to yaml format.
Additional Change for fsl,q(b)man-portal:
- Only keep one example.
- Add fsl,qman-channel-id property.
- Use interrupt type macro.
- Remove top level qman-portals@ff4200000 at example.
Additional change for fsl,q(b)man:
- Fixed example error.
- Remove redundent part, only keep fsl,qman node.
- Change memory-regions to memory-region.
- fsl,q(b)man-portals is not required property
Additional change for fsl,qman-fqd.yaml:
- Fixed example error.
- Only keep one example.
- Ref to reserve-memory.yaml
- Merge fsl,bman reserver memory part
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.11
Support for Shared Memory (shm) Bridge is added, which provides a
stricter interface for handling of buffers passed to TrustZone.
The X1Elite platform is added to uefisecapp allow list, to instantiate
the efivars implementation.
A new in-kernel implementation of the pd-mapper (or servreg) service is
introduced, to replace the userspace dependency for USB Type-C and
battery management.
Support for sharing interrupts across multiple bwmon instances is added,
and a refcount imbalance issue is corrected.
The LLCC support for recent platforms is corrected, and SA8775P support
is added.
A new interface is added to SMEM, to expose "feature codes". One example
of the usecase for this is to indicate to the GPU driver which
frequencies are available on the given device.
The interrupt consumer and provider side of SMP2P is updated to provide
more useful names in interrupt stats.
Support for using the mailbox binding and driver for outgoing IPC
interrupt in the SMSM driver is introduced.
socinfo driver learns about SDM670 and IPQ5321, as well as get some
updates to the X1E PMICs.
pmic_glink is bumped to now support managing 3 USB Type-C ports.
* tag 'qcom-drivers-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (48 commits)
soc: qcom: smp2p: Use devname for interrupt descriptions
soc: qcom: smsm: Add missing mailbox dependency to Kconfig
soc: qcom: add missing pd-mapper dependencies
soc: qcom: icc-bwmon: Allow for interrupts to be shared across instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Add X1E80100 BWMON instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Remove opp-table from the required list
firmware: qcom: tzmem: export devm_qcom_tzmem_pool_new()
soc: qcom: add pd-mapper implementation
soc: qcom: pdr: extract PDR message marshalling data
soc: qcom: pdr: fix parsing of domains lists
soc: qcom: pdr: protect locator_addr with the main mutex
firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
firmware: qcom: scm: add support for SHM bridge memory carveout
firmware: qcom: tzmem: enable SHM Bridge support
firmware: qcom: scm: add support for SHM bridge operations
firmware: qcom: qseecom: convert to using the TZ allocator
firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ allocator
firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX DT bindings for 6.11:
- Add compatible string for various new boards
- Drop Li Yang as maintainer for bindings as his email bounces
* tag 'imx-bindings-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: document Kontron SMARC-sAMX6i boards
dt-bindings: arm: add MBa8MP-RAS314 SBC
dt-bindings: arm: fsl: add i.MX93 9x9 QSB board
dt-bindings: arm: fsl: add i.MX95 19x19 EVK board
dt-bindings: arm: fsl: Document Compulab IOT-GATE-iMX8
dt-bindings: Drop Li Yang as maintainer for all bindings
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.11
Few cleanups and improvements which were missed by their maintainers:
1. Add Krzysztof as odd-fixer for old ARM platforms: Alphascale, AXM
LSI, Moxa, TI Nspire and VT8500 (with Alexey Charkov).
2. VT8500: align node names with bindings (USB, panel timings).
3. Cirrus: align node names with bindings (panel timings).
4. TI Nspire: correct unit addresses, correct watchdog compatible and
properties while making it disabled (never tested).
5. Nuvoton, Aspeed: align node names with bindings (I2C).
IMPORTANT: At least for Aspeed it is known to affect some user-space
tools, because that user-space looks for specific node path via
/sys/firmware/devicetree. The /sys/firmware/devicetree is not the ABI
and any user-space relying on it:
- Prevents any changes in DTS, e.g. node renaming or moving,
changing unit addresses (re-arranging child bus addressing).
- Is using undocumented interface.
- Is neither reliable nor understandable.
6. TI OMAP and Davinci: align node names with bindings (panel timings),
drop incorrect property.
7. STI: document in bindings codec child to fix dtbs_checks.
* tag 'dt-cleanup-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: omap am5729-beagleboneai: drop unneeded ti,enable-id-detection
dt-bindings: soc: sti: st,sti-syscon: document codec node
ARM: dts: ti: align panel timings node name with dtschema
arm: dts: aspeed: Use standard 'i2c' bus node name
arm: dts: nuvoton: Use standard 'i2c' bus node name
MAINTAINERS: ARM: alphascale: add Krzysztof Kozlowski as maintainer
ARM: dts: nspire: Add full compatible for watchdog node
ARM: dts: nspire: Add unit name addresses to memory nodes
MAINTAINERS: ARM: nspire: add Krzysztof Kozlowski as maintainer
MAINTAINERS: ARM: vt8500: add Alexey and Krzysztof as maintainers
MAINTAINERS: ARM: axm: add Krzysztof Kozlowski as maintainer
MAINTAINERS: ARM: moxa: add Krzysztof Kozlowski as maintainer
ARM: dts: cirrus: align panel timings node name with dtschema
ARM: dts: vt8500: align panel timings node name with dtschema
ARM: dts: vt8500: replace "uhci" nodename with generic name "usb"
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM64 DTS for v6.11
Few cleanups and improvements which were missed by their maintainers:
1. Spreadtrum: correct PMU nodes - split per clusters.
2. HiSilicon: add dedicated compatible to syscon node ("syscon" alone is
not allowed).
3. APM: add dedicated compatible to syscon node (binding applied to MFD
tree).
* tag 'dt64-cleanup-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
arm64: dts: apm: Add dedicated syscon poweroff compatibles
arm64: dts: hisilicon: hi3660: add dedicated hi3660-usb3-otg-bc compatible
dt-bindings: soc: hisilicon: document hi3660-usb3-otg-bc
arm64: dts: sprd: Split PMU nodes for heterogeneous CPUs
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Add documentation to describe the "Other Logic Block" system-controller.
It deals with three platforms: EyeQ5, EyeQ6L and EyeQ6H. First two have
a single instance, whereas EyeQ6H has seven named instances.
Features provided are:
- Clocks, children to main crystal. Some PLLs and divider clocks.
- Resets. Some instances DO NOT have reset.
- Pinctrl. Only EyeQ5 has such feature.
Those are NOT the only features exposed in OLB system-controllers! Many
individual registers, related to IP block integration, can be found.
Additional features will be exposed over time.
We simplify devicetree phandles to OLB in two ways:
- Compatibles exposing a single clock do not ask for a index argument.
This means we use EyeQ6H OLB south (it has four clocks):
clocks = <&olb_south EQ6HC_SOUTH_PLL_PER>;
But use EyeQ6H OLB east (it has one clock):
clocks = <&olb_east>;
- Compatibles exposing a single reset domain do not ask for a domain
index, only a reset index.
This means we use EyeQ5 OLB (it has three domains):
resets = <&olb 0 10>;
But use EyeQ6H west reset (it has one domain):
resets = <&olb_west 3>;
About pinctrl subnodes: all pins have two functionality, either GPIO or
something-else. The latter is pin dependent, we express constraints
using many if-then.
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Théo Lebrun <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
Convert txt bindings of Rockchip EMMC PHY to dtschema to allow
for validation.
Signed-off-by: Shresth Prasad <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
soc/ti is the more appropriate location for the system controller
device tree binding documentation so move there.
Update Kishon's email address to a working one.
Signed-off-by: Roger Quadros <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
The http://processors.wiki.ti.com EOL in january 2021
Fix the old URL with the new one.
Signed-off-by: Richard Genoud <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
ti,am654-serdes-ctrl is not a simple syscon device - it has children -
thus it should be fully documented in its own binding.
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/20240626-dt-bindings-mfd-syscon-split-v3-5-3409903bb99b@linaro.org
Signed-off-by: Lee Jones <[email protected]>
|