| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Add remoteproc support for the Cortex M4F found in AM62x and AM64x of
the TI K3 family, support for the modem remoteproc in the Qualcomm
SDX75, and audio, compute and general-purpose DSPs of the Qualcomm
SA8775P.
- Add support for blocking and non-blocking mailbox transmissions to
the i.MX remoteproc driver, and implement poweroff and reboot
mechanisms using them. Plus a few bug fixes and minor improvements.
- Cleanups and bug fixes for the TI K3 DSP and R5F drivers
- Support mapping SRAM regions into the AMD-Xilinx Zynqmp R5 cores
- Use devres helpers for various allocations in the Ingenic, TI DA8xx,
TI Keystone, TI K3, ST slim drivers
- Replace uses of of_{find,get}_property() with of_property_present()
where possible
* tag 'rproc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteporc: ingenic: Use devm_platform_ioremap_resource_byname()
remoteproc: da8xx: Use devm_platform_ioremap_resource_byname()
remoteproc: st_slim: Use devm_platform_ioremap_resource_byname()
remoteproc: xlnx: Add sram support
remoteproc: k3-r5: Fix error handling when power-up failed
remoteproc: imx_rproc: Add support for poweroff and reboot
remoteproc: imx_rproc: Allow setting of the mailbox transmit mode
remoteproc: k3-r5: Delay notification of wakeup event
remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
remoteproc: k3: Factor out TI-SCI processor control OF get function
dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs
remoteproc: k3-dsp: Acquire mailbox handle during probe routine
remoteproc: k3-r5: Acquire mailbox handle during probe routine
remoteproc: k3-r5: Use devm_rproc_alloc() helper
remoteproc: qcom: pas: Add support for SA8775p ADSP, CDSP and GPDSP
remoteproc: qcom: pas: Add SDX75 remoteproc support
dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
remoteproc: keystone: Use devm_rproc_alloc() helper
remoteproc: keystone: Use devm_kasprintf() to build name string
dt-bindings: remoteproc: xlnx,zynqmp-r5fss: Add missing "additionalProperties" on child nodes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
|
|
Corrected several typos in Documentation/devicetree/bindings files.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Kuan-Wei Chiu <[email protected]>
Reviewed-by: Matti Vaittinen <[email protected]>
Signed-off-by: Yu-Chun Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.12
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
* tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Allow QSEECOM on Surface Laptop 7 models
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM7325 compatible
soc: qcom: pd_mapper: Add SM7325 compatible
soc: qcom: socinfo: Add Soc IDs for SM7325 family
dt-bindings: arm: qcom,ids: Add IDs for SM7325 family
soc: qcom: socinfo: add QCS8275/QCS8300 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS8275/QCS8300
soc: qcom: smp2p: use scoped device node handling to simplify error paths
soc: qcom: pbs: use scoped device node handling to simplify error paths
soc: qcom: ocmem: use scoped device node handling to simplify error paths
soc: qcom: ice: use scoped device node handling to simplify error paths
soc: qcom: aoss: simplify with scoped for each OF child loop
soc: qcom: apr: simplify with scoped for each OF child loop
soc: qcom: smd-rpm: add qcom,smd-rpm compatible
dt-bindings: soc: qcom: smd-rpm: add generic compatibles
Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"
firmware: qcom: scm: Add multiple download mode support
firmware: qcom: scm: Refactor code to support multiple dload mode
soc: qcom: pd_mapper: Add more older platforms without domains
soc: qcom: pd_mapper: Add X1E80100
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
K3 AM64x SoC has a Cortex M4F subsystem in the MCU voltage domain.
The remote processor's life cycle management and IPC mechanisms are
similar across the R5F and M4F cores from remote processor driver
point of view. However, there are subtle differences in image loading
and starting the M4F subsystems.
The YAML binding document provides the various node properties to be
configured by the consumers of the M4F subsystem.
Signed-off-by: Martyn Welch <[email protected]>
Signed-off-by: Hari Nagalla <[email protected]>
Signed-off-by: Andrew Davis <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
|
|
Add two generic compatibles to all smd-rpm devices, they follow the same
RPMSG protocol and are either accessed through the smd-edge or through
the glink-edge.
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Document the MPSS Peripheral Authentication Service on SDX75 platform.
Signed-off-by: Naina Mehta <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
"additionalProperties" on child nodes
All nodes need an explicit additionalProperties or unevaluatedProperties
unless a $ref has one that's false. Add missing additionalProperties
to fix dt_binding_check warning:
xlnx,zynqmp-r5fss.yaml: ^r(.*)@[0-9a-f]+$: Missing additionalProperties/unevaluatedProperties constraint
Fixes: 9e1b2a0757d0 ("dt-bindings: remoteproc: Add Tightly Coupled Memory (TCM) bindings")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Tanmay Shah <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
|
|
Use my @kernel.org address everywhere.
Signed-off-by: Konrad Dybcio <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- The maximum amount of DDR memory used by the Mediatek MT8188/MT8195
SCP is increased to handle new use cases. Handling of optional L1TCM
memory is made actually optional.
- An optimization is introduced to only clear the unused portion of IPI
shared buffers, rather than the entire buffer before writing the
message.
- Detection for IPC-only mode in the TI K3 DSP remoteproc driver is
corrected. The loglevel of a debug print in the same is lowered from
error.
- Support for attaching to an running remote processor is added to the
Xilinx R5F.
- An in-kernel implementation of the Qualcomm "protected domain mapper"
(aka service registry) service is introduced, to remove the
dependency on a userspace implementation to detect when the battery
monitor and USB Type-C port manager becomes available. This is then
integrated with the Qualcomm remoteproc driver.
- The Qualcomm PAS remoteproc driver gains support for attempting to
bust hwspinlocks held by the remote processor when it
crashed/stopped.
- The TI OMAP remoteproc driver is transitioned to use devres helpers
for various forms of allocations.
- Parsing of memory-regions in the i.MX remoteproc driver is improved
to avoid a NULL pointer dereference if the phandle reference is
empty. of_node reference counting is corrected in the same.
* tag 'rproc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: mediatek: Increase MT8188/MT8195 SCP core0 DRAM size
remoteproc: k3-dsp: Fix log levels where appropriate
remoteproc: xlnx: Add attach detach support
remoteproc: qcom: select AUXILIARY_BUS
remoteproc: k3-r5: Fix IPC-only mode detection
remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing
remoteproc: qcom: enable in-kernel PD mapper
dt-bindings: remoteproc: imx_rproc: Add minItems for power-domain
remoteproc: imx_rproc: Fix refcount mistake in imx_rproc_addr_init
remoteproc: omap: Use devm_rproc_add() helper
remoteproc: omap: Use devm action to release reserved memory
remoteproc: omap: Use devm_rproc_alloc() helper
remoteproc: imx_rproc: Skip over memory region when node value is NULL
dt-bindings: remoteproc: k3-dsp: Correct optional sram properties for AM62A SoCs
remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
remoteproc: mediatek: Zero out only remaining bytes of IPI buffer
|
|
and GPDSP
Document the components used to boot the ADSP, CDSP0, CDSP1, GPDSP0 and
GPDSP1 on the SA8775p SoC.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
"fsl,imx8qxp-cm4" and "fsl,imx8qm-cm4" need minimum 2 power domains. Other
platform doesn't require 'power-domain'.
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
|
|
The C7xv-dsp on AM62A have 32KB L1 I-cache and a 64KB L1 D-cache. It
does not have an addressable l1dram . So, remove this optional sram
property from the bindings to fix device tree build warnings.
Signed-off-by: Hari Nagalla <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This makes the remoteproc core rproc_class const.
DeviceTree bindings for a few different Qualcomm remoteprocs are
updated to remove a range of validation warnings/errors. The Qualcomm
SMD binding marks qcom,ipc deprecated, in favor or the mailbox
interface.
The TI K3 R5 remoteproc driver is updated to ensure that cores are
powered up in the appropriate order. The driver also see a couple of
fixes related to cleanups in error paths during probe.
The Mediatek remoteproc driver is extended to support the MT8188 SCP
core 1. Support for varying DRAM and IPI shared buffer sizes are
introduced. This together with a couple of bug fixes and improvements
to the driver.
Support for the AMD-Xilinx Versal and Versal-NET platforms are added.
Coredump support and support for parsing TCM information from
DeviceTree is added to the Xilinx R5F remoteproc driver"
* tag 'rproc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits)
dt-bindings: remoteproc: qcom,sdm845-adsp-pil: Fix qcom,halt-regs definition
dt-bindings: remoteproc: qcom,sc7280-wpss-pil: Fix qcom,halt-regs definition
dt-bindings: remoteproc: qcom,qcs404-cdsp-pil: Fix qcom,halt-regs definition
dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
dt-bindings: remoteproc: qcom,smd-edge: Mark qcom,ipc as deprecated
remoteproc: k3-r5: Jump to error handling labels in start/stop errors
remoteproc: mediatek: Fix error code in scp_rproc_init()
remoteproc: k3-r5: Do not allow core1 to power up before core0 via sysfs
remoteproc: k3-r5: Wait for core0 power-up before powering up core1
remoteproc: mediatek: Add IMGSYS IPI command
remoteproc: mediatek: Support setting DRAM and IPI shared buffer sizes
remoteproc: mediatek: Support MT8188 SCP core 1
dt-bindings: remoteproc: mediatek: Support MT8188 dual-core SCP
drivers: remoteproc: xlnx: Fix uninitialized tcm mode
drivers: remoteproc: xlnx: Fix uninitialized variable use
drivers: remoteproc: xlnx: Add Versal and Versal-NET support
remoteproc: zynqmp: parse TCM from device tree
dt-bindings: remoteproc: Add Tightly Coupled Memory (TCM) bindings
remoteproc: zynqmp: fix lockstep mode memory region
remoteproc: zynqmp: Add coredump support
...
|
|
Set the 'items' correctly for the qcom,halt-regs property and update the
description to match what it should be.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Set the 'items' correctly for the qcom,halt-regs property and update the
description to match what it should be.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Set the 'items' correctly for the qcom,halt-regs property and update the
description to match what it should be.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
MSM8996 has limited glink support, allow glink-edge node on MSM8996
platform.
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Deprecate the qcom,ipc way of accessing the mailbox in favor of the
'mboxes' property.
Update the example to use mboxes.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Under different applications, the MT8188 SCP can be used as single-core
or dual-core.
Signed-off-by: Olivia Wen <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
|
|
Introduce bindings for TCM memory address space on AMD-xilinx Zynq
UltraScale+ platform. It will help in defining TCM in device-tree
and make it's access platform agnostic and data-driven.
Tightly-coupled memories(TCMs) are low-latency memory that provides
predictable instruction execution and predictable data load/store
timing. Each Cortex-R5F processor contains two 64-bit wide 64 KB memory
banks on the ATCM and BTCM ports, for a total of 128 KB of memory.
The TCM resources(reg, reg-names and power-domain) are documented for
each TCM in the R5 node. The reg and reg-names are made as required
properties as we don't want to hardcode TCM addresses for future
platforms and for zu+ legacy implementation will ensure that the
old dts without reg/reg-names works and stable ABI is maintained.
It also extends the examples for TCM split and lockstep modes.
Signed-off-by: Radhey Shyam Pandey <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Tanmay Shah <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
|
|
TI Davinci remoteproc bindings were marked as work-in-progress /
unstable in 2017 in commit ae67b8007816 ("dt-bindings: remoteproc: Add
bindings for Davinci DSP processors"). Almost seven years is enough, so
drop the "unstable" remark and expect usual ABI rules.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
Acked-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
Document the aDSP and cDSP Peripheral Authentication Service on the
X1E80100 Platform.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
dtschema package defines firmware-name as string-array, so individual
bindings should not make it a string but instead just narrow the number
of expected firmware file names.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
dtschema defines label as string, so $ref in other bindings is
redundant.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Document the DSP Peripheral Authentication Service on the SM8650 Platform.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/20240123-topic-sm8650-upstream-remoteproc-v7-1-61283f50162f@linaro.org
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- The i.MX DSP remoteproc driver adds support for providing a resource
table, in order to enable IPC with the core
- The TI K3 DSP driver is transitioned to remove_new, error messages
are changed to use symbolic error codes, and dev_err_probe() is used
where applicable
- Support for the Qualcomm SC7280 audio, compute and WiFi co-processors
are added to the Qualcomm TrustZone based remoteproc driver
* tag 'rproc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: qcom_q6v5_pas: Add SC7280 ADSP, CDSP & WPSS
dt-bindings: remoteproc: qcom: sc7180-pas: Add SC7280 compatibles
dt-bindings: remoteproc: qcom: sc7180-pas: Fix SC7280 MPSS PD-names
remoteproc: k3-dsp: Convert to platform remove callback returning void
remoteproc: k3-dsp: Use symbolic error codes in error messages
remoteproc: k3-dsp: Suppress duplicate error message in .remove()
arm64: dts: imx8mp: Add reserve-memory nodes for DSP
remoteproc: imx_dsp_rproc: Add mandatory find_loaded_rsc_table op
|
|
Add the compatibles and constraints for the ADSP, CDSP and WPSS found on
the SC7280 SoC.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
The power domains for MPSS on SC7280 are actually named CX and MSS, and
not CX and MX. Adjust the name which also aligns the bindings with the
dts and fixes validation.
Fixes: 8bb92d6fd0b3 ("dt-bindings: remoteproc: qcom,sc7180-pas: split into separate file")
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Use only one and exactly one space around '=' in DTS example.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Serge Semin <[email protected]>
Acked-by: Ulf Hansson <[email protected]> # For MMC
Acked-by: Jonathan Cameron <[email protected]> #for-iio
Acked-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Support for controlling the second core in Mediatek's SCP dual-core
setup is introduced.
Support for audio, compute and modem DSPs on Qualcomm SM6375, and the
audio DSP in SC7180 are introduced. The peripheral NoC clock is
dropped from MSM8996 modem DSP, as this is handled through the
interconnect provider.
In the zynqmp driver the setup for TCM memory, and device address
translation thereof, when operating in lockstep mode is corrected.
A few bug fixes and cleanups are introduces across the ST and STM32
remoteproc drivers"
* tag 'rproc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (28 commits)
remoteproc: st: Fix sometimes uninitialized ret in st_rproc_probe()
remoteproc: st: Use device_get_match_data()
remoteproc: zynqmp: Change tcm address translation method
remoteproc: mediatek: Refactor single core check and fix retrocompatibility
remoteproc: qcom: q6v5-mss: Remove PNoC clock from 8996 MSS
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Remove PNoC clock
dt-bindings: remoteproc: qcom,adsp: Remove AGGRE2 clock
remoteproc: qcom: pas: Add SM6375 MPSS
remoteproc: qcom: pas: Add SM6375 ADSP & CDSP
dt-bindings: remoteproc: qcom,sm6375-pas: Document remoteprocs
dt-bindings: remoteproc: pru: Add Interrupt property
remoteproc: qcom: pas: Add sc7180 adsp
dt-bindings: remoteproc: qcom: sc7180-pas: Add ADSP compatible
arm64: dts: mediatek: Update the node name of SCP rpmsg subnode
remoteproc: zynqmp: fix TCM carveouts in lockstep mode
remoteproc: mediatek: Refine ipi handler error message
remoteproc: mediatek: Report watchdog crash to all cores
remoteproc: mediatek: Handle MT8195 SCP core 1 watchdog timeout
remoteproc: mediatek: Setup MT8195 SCP core 1 SRAM offset
remoteproc: mediatek: Remove dependency of MT8195 SCP L2TCM power control on dual-core SCP
...
|
|
The common reserved-memory bindings have recently been copied from the
kernel tree into dtschema. The preference is to host common, stable
bindings in dtschema. As reserved-memory is documented in the DT Spec,
it meets the criteria.
The v2023.09 version of dtschema is what contains the reserved-memory
schemas we depend on, so bump the minimum version to that. Otherwise,
references to these schemas will generate errors.
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
The PNoC clock is a clock for the entire PNoC bus, managed from
within the interconnect driver. Attaching it to MSS was a total hack.
Get rid of it.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
The AGGRE2 clock is a clock for the entire AGGRE2 bus, managed from
within the interconnect driver. Attaching it to SLPI was a total hack.
Get rid of it.
Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
SM6375 hosts an ADSP, CDSP and modem as remote processors. Create
related bindings.
Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Add interrupts and interrupt-names protperties for PRU and RTU cores.
Signed-off-by: MD Danish Anwar <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
SC7180 has an ADSP remoteproc. Add it's compatible to the bindings and
refactor the schema conditionals to fit the ADSP.
Signed-off-by: Nikita Travkin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Extend the SCP binding to describe the MT8195 dual-core SCP.
Under different applications, the MT8195 SCP can be used as single-core
or dual-core. This change keeps the single-core definitions and
adds new definitions for the dual-core use case.
Signed-off-by: Tinghan Shen <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
|
|
Improve the definition of the rpmsg subnode by assigning a distinct
node name and adding the definition source of node properties.
Signed-off-by: Tinghan Shen <[email protected]>
Acked-by: Rob Herring <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Support for booting the iMX remoteprocs using MMIO, instead of SMCCC
is added. The iMX driver is also extended to support delivering
interrupts from an arbitrary number of vdev.
Support is added to the TI PRU driver, to allow GPMUX to be controlled
from DeviceTree.
The Qualcomm coredump collector is extended to fall back to generating
a full coredump, in the case that the loaded firmware doesn't support
generating minidump. The overly terse MD abbreviation of "MINIDUMP" is
expanded, to make the code easier on the eye.
The list of Qualcomm Sensor Low Power Island (SLPI) instances
supported is cleaned up, and SDM845 is added. SDM630/636/660 support
for the modem subsystem (mss) is added.
All the Qualcomm drivers are transitioned to of_reserved_mem_lookup()
instead of open coding the resolution of reserved-memory regions, to
gain handling of error cases. A couple of drivers are transitioned to
use devm_platform_ioremap_resource_byname().
The stm32 remoteproc driver's PM operations are updated to modern
macros, to avoid the "unused variable"-warning in some configurations.
Drivers are transitioned away from directly including of_device.h"
* tag 'rproc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (23 commits)
remoteproc: pru: add support for configuring GPMUX based on client setup
remoteproc: stm32: fix incorrect optional pointers
remoteproc: imx_rproc: Switch iMX8MN/MP from SMCCC to MMIO
dt-bindings: remoteproc: imx_rproc: Support i.MX8MN/P MMIO
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Fix 8996 clocks
remoteproc: qcom: pas: add SDM845 SLPI compatible
remoteproc: qcom: q6v5-mss: Add support for SDM630/636/660
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Add SDM660 compatible
remoteproc: qcom: Expand MD_* as MINIDUMP_*
remoteproc: qcom: pas: refactor SLPI remoteproc init
dt-bindings: remoteproc: qcom: adsp: add qcom,sdm845-slpi-pas compatible
remoteproc: qcom: wcnss: use devm_platform_ioremap_resource_byname()
remoteproc: qcom: q6v5: use devm_platform_ioremap_resource_byname()
dt-bindings: remoteproc: qcom: sm6115-pas: Add QCM2290
remoteproc: qcom: Add full coredump fallback mechanism
remoteproc: core: Export the rproc coredump APIs
remoteproc: qcom: Use of_reserved_mem_lookup()
remoteproc: imx_rproc: iterate all notifiyids in rx callback
dt-bindings: remoteproc: qcom,adsp: bring back firmware-name
dt-bindings: remoteproc: qcom,sm8550-pas: require memory-region
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
|
|
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.
Correct also the format // -> .* in few Allwinner binding headers as
pointed out by checkpatch:
WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
Fix typos in Documentation/devicetree/bindings. The changes are in
descriptions or comments where they shouldn't affect functionality.
Signed-off-by: Bjorn Helgaas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
Update the RPMHPD references with new bindings defined in rpmhpd.h
for Qualcomm SoCs SM8[2345]50.
Signed-off-by: Rohit Agarwal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
The MX8M CM7 boot via SMC call is problematic, since not all versions
of ATF support this interface. Document MMIO support used to boot the
CM7 on MX8MN/MP instead and discern MMIO interface using DT compatible
string. Document GPR register syscon phandle which is required by the
MMIO interface too.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
|
|
Change RPMH to RPM (as RPMh was introduced 2 generations later) and drop
the prng reference, which made ARRAY_SIZE(clocks) !=
ARRAY_SIZE(clock-names).
Fixes: bdea142295ff ("dt-bindings: remoteproc: qcom,q6v5: Move MSM8996 to schema")
Signed-off-by: Konrad Dybcio <[email protected]>
Acked-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Mention sdm660-mss-pil in compatibles list.
Signed-off-by: Alexey Minnekhanov <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
SLPI DSP remoteproc on DSP is defined by the 'qcom,sdm845-slpi-pas'
compatible in the qcom_q6v5_pas driver. Add this compatible to the
devicetree bindings.
Signed-off-by: Dylan Van Assche <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
QCM2290 is more or less a fork of the same design that SM6115 is based
on. As a result, the ADSP and modem found on it are identical.
Add compatibles for the QCM2290 with SM6115 fallbacks so as not to
require any driver changes. Change the allOf:if:properties clauses
to look for the presence of SM6115 compatibles and not an exact match.
Note that QCM2290 lacks a CDSP.
Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
The firmware-name property was moved from common qcom,pas-common.yaml
binding to each device-specific schema, but the qcom,adsp.yaml was not
updated.
Fixes: cee616c68846 ("dt-bindings: remoteproc: qcom: adsp: move memory-region and firmware-name out of pas-common")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|