| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/[email protected]/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
|
|
The chip has 3 dual-channel PWM modules PWM_AB, PWM_CD, PWM_EF.
Signed-off-by: George Stark <[email protected]>
Signed-off-by: Dmitry Rokosov <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
On newer SoCs, the PWM hardware can require a power domain to operate
so add corresponding optional property.
Signed-off-by: George Stark <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clock-names.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Add YAML bindings for ep93xx SoC PWM.
Signed-off-by: Nikita Shubin <[email protected]>
Tested-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Document support for the 16-Bit Timer Pulse Unit (TPU) in the Renesas
R-Car V4M (R8A779H0) SoC.
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Document support for the PWM timers in the Renesas R-Car V4M (R8A779H0)
SoC.
Signed-off-by: Wolfram Sang <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface,
new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75
GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and
CSI-2 blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'"
* tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: timer: sprd-timer: convert to YAML
dt-bindings: incomplete-devices: document devices without bindings
dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43
dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node
dt-bindings: soc: fsl: cpm_qe: convert to yaml format
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: fsi: Document the AST2700 FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml
dt-bindings: soc: fsl: Convert q(b)man-* to yaml format
dt-bindings: misc: fsl,qoriq-mc: convert to yaml format
dt-bindings: drop stale Anson Huang from maintainers
...
|
|
Add compatible string for sama7d65. Like sama7g5, it currently binds to
"atmel,sama5d2-pwm" compatibility string for this driver, so add an
"enum" to reflect that.
Signed-off-by: Nicolas Ferre <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
The driver "drivers/pwm/pwm-imx27.c" never use interrupt. Generally pwm
hardware generate a waveform according to register timing setting. Needn't
interrupt handle at all. So remove it from "required" list.
Signed-off-by: Frank Li <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Add bindings for PWM modulated by GPIO.
Signed-off-by: Nicola Di Lieto <[email protected]>
Co-developed-by: Stefan Wahren <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Add Analog Devices AXI PWM generator.
Link: https://analogdevicesinc.github.io/hdl/library/axi_pwm_gen/index.html
Signed-off-by: Drew Fustini <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Michael Hennerich <[email protected]>
Acked-by: Nuno Sa <[email protected]>
Co-developed-by: Trevor Gamblin <[email protected]>
Signed-off-by: Trevor Gamblin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Convert dt-bindings pwm-fsl-ftm.txt to yaml format.
Additional change during convert:
- "big-endian" is not required property.
- Add "sleep" to pinctrl-names.
- Change pinctrl-NNN to pinctrl-0 and pinctrl-1.
- Remove label "pwm0" in example.
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Emails to Anson Huang bounce:
Diagnostic-Code: smtp; 550 5.4.1 Recipient address rejected: Access denied.
Add IMX platform maintainers for bindings which would become orphaned.
Acked-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Acked-by: Peng Fan <[email protected]>
Acked-by: Wolfram Sang <[email protected]> # for I2C
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Mark Brown <[email protected]>
Acked-by: Jonathan Cameron <[email protected]> # for IIO
Acked-by: Andi Shyti <[email protected]>
Acked-by: Abel Vesa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
When commit 89650a1e3b6f ("dt-bindings: pwm: Convert PWM bindings
to json-schema") converted the pwm provider section of the text binding
to dt-schema it also updated all references to pwm.txt in pwm provider
bindings to pwm.yaml.
Most pwm provider bindings had a reference to pwm.txt as it contains a
description of what the cells in #pwm-cells are, albeit in the consumer
section of the document. Only information in the provider section of the
document was moved to the yaml binding, and it contains no information
about the cell format, making all references to it for the cell format
unhelpful.
Fixes: 89650a1e3b6f ("dt-bindings: pwm: Convert PWM bindings to json-schema")
Signed-off-by: Conor Dooley <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/20240517-patient-stingily-30611f73e792@spud
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
pwm-cells property is already required by pwm.yaml schema.
Signed-off-by: Binbin Zhou <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/68eaecf11db9bec7bdb90dbf38507332628a0434.1714450308.git.zhoubinbin@loongson.cn
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
pwm-cells property is already required by pwm.yaml schema.
Signed-off-by: Binbin Zhou <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/480bcdc37958a9d99f4b61c26a13b844a1e416df.1714450308.git.zhoubinbin@loongson.cn
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
pwm-cells property is already required by pwm.yaml schema.
Signed-off-by: Binbin Zhou <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/0a0c13d6d716a52540e165e4835c0c406cc5d8ec.1714450308.git.zhoubinbin@loongson.cn
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
pwm-cells property is already required by pwm.yaml schema.
Signed-off-by: Binbin Zhou <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/06765e0dd9a842dc51ff9c9cea93f26b8792e44b.1714450308.git.zhoubinbin@loongson.cn
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
pwm-cells property is already required by pwm.yaml schema.
Signed-off-by: Binbin Zhou <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/231df058d9cb35cfcf4bcdf4385f4ad8cb21a046.1714450308.git.zhoubinbin@loongson.cn
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
pwm-cells property is already required by pwm.yaml schema.
Signed-off-by: Binbin Zhou <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/85d7dc606d60a7d0d1557b98ac3a600c660b7421.1714450308.git.zhoubinbin@loongson.cn
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Add a compatible string for MediaTek Genio 350 MT8365's display PWM
block: this is the same as MT8183.
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Alexandre Mergnat <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Add compatible strings list for SAM9X7.
Signed-off-by: Varshini Rajendran <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Allow the power-domains property to the PWM_DISP block as on some SoCs
this does need at most one power domain.
Fixes: b09b179bac0a ("dt-bindings: pwm: Convert pwm-mtk-disp.txt to mediatek,pwm-disp.yaml format")
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"These are changes that for some reason ended up not making it into the
first four branches but that should still make it into 6.9:
- A rework of the omap clock support that touches both drivers and
device tree files
- The reset controller branch changes that had a dependency on late
bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
drivers branch
- The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
changes that got delayed and needed some extra time in linux-next
for wider testing"
* tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
soc: fsl: dpio: fix kcalloc() argument order
bus: ts-nbus: Improve error reporting
bus: ts-nbus: Convert to atomic pwm API
riscv: dts: starfive: jh7110: Add camera subsystem nodes
ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
clk: ti: Improve clksel clock bit parsing for reg property
clk: ti: Handle possible address in the node name
dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
dt-bindings: riscv: cpus: reg matches hart ID
reset: Instantiate reset GPIO controller for shared reset-gpios
reset: gpio: Add GPIO-based reset controller
cpufreq: do not open-code of_phandle_args_equal()
of: Add of_phandle_args_equal() helper
reset: simple: add support for Sophgo SG2042
dt-bindings: reset: sophgo: support SG2042
riscv: dts: microchip: add specific compatible for mpfs pdma
riscv: dts: microchip: add missing CAN bus clocks
ARM: brcmstb: Add debug UART entry for 74165
...
|
|
The binding that is used up to now describe which input the PWM
channel multiplexer should pick among its possible parents,
which are hardcoded in the driver. This isn't a good binding in
the sense that it should describe hardware but not usage.
Add a new binding deprecating the old one that uses clocks in a
better way and how clocks are usually used today: The list of
clocks describe the inputs of the PWM block as they are realised
in hardware.
So deprecate the old bindings and introduce a compatible per SoC
family to replace these.
Signed-off-by: Jerome Brunet <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
s4 has been added to the compatible list while converting the Amlogic PWM
binding documentation from txt to yaml.
However, on the s4, the clock bindings have different meaning compared to
the previous SoCs.
On the previous SoCs the clock bindings used to describe which input the
PWM channel multiplexer should pick among its possible parents.
This is very much tied to the driver implementation, instead of describing
the HW for what it is. When support for the Amlogic PWM was first added,
how to deal with clocks through DT was not as clear as it nowadays.
The Linux driver now ignores this DT setting, but still relies on the
hard-coded list of clock sources.
On the s4, the input multiplexer is gone. The clock bindings actually
describe the clock as it exists, not a setting. The property has a
different meaning, even if it is still 2 clocks and it would pass the check
when support is actually added.
Also the s4 cannot work if the clocks are not provided, so the property is
no longer optional.
Finally, for once it makes sense to see the input as being numbered
somehow. No need to bother with clock-names on the s4 type of PWM.
Fixes: 43a1c4ff3977 ("dt-bindings: pwm: Convert Amlogic Meson PWM binding")
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Jerome Brunet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
StarFive JH8100 uses the same OpenCores PWM controller as JH7110.
Mark JH8100 as compatible to the OpenCores PWM controller.
Signed-off-by: Ley Foon Tan <[email protected]>
Signed-off-by: Ji Sheng Teoh <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Conor Dooley <[email protected]>
|
|
MT7988 has on-SoC controller that can control up to 8 PWM interfaces. It
differs from blocks on other SoCs (amount of PWMs & registers) so it
needs its own compatible string.
Signed-off-by: Rafał Miłecki <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Convert device tree bindings for Atmel's HLCDC PWM controller to YAML
format.
Signed-off-by: Dharma Balasubiramani <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Convert the PXA PWM binding file from TXT to YAML.
The original binding does not mention any clocks, but the PWM controller
will not probe without a clock.
Reviewed-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Duje Mihanović <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Add bindings for OpenCores PWM Controller.
Signed-off-by: William Qiu <[email protected]>
Reviewed-by: Hal Feng <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Uwe Kleine-König <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Conor Dooley <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains a bunch of cleanups and simplifications across the
board, as well as a number of small fixes.
Perhaps the most notable change here is the addition of an API that
allows PWMs to be used in atomic contexts, which is useful when time-
critical operations are involved, such as using a PWM to generate IR
signals.
Finally, I have decided to step down as PWM subsystem maintainer. Due
to other responsibilities I have lately not been able to find the time
that the subsystem deserves and Uwe, who has been helping out a lot
for the past few years and has many things planned for the future, has
kindly volunteered to take over. I have no doubt that he will be a
suitable replacement"
* tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
MAINTAINERS: pwm: Thierry steps down, Uwe takes over
pwm: linux/pwm.h: fix Excess kernel-doc description warning
pwm: Add pwm_apply_state() compatibility stub
pwm: cros-ec: Drop documentation for dropped struct member
pwm: Drop two unused API functions
pwm: lpc18xx-sct: Don't modify the cached period of other PWM outputs
pwm: meson: Simplify using dev_err_probe()
pwm: stmpe: Silence duplicate error messages
pwm: Reduce number of pointer dereferences in pwm_device_request()
pwm: crc: Use consistent variable naming for driver data
pwm: omap-dmtimer: Drop locking
dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml
media: pwm-ir-tx: Trigger edges from hrtimer interrupt context
pwm: bcm2835: Allow PWM driver to be used in atomic context
pwm: Make it possible to apply PWM changes in atomic context
pwm: renesas: Remove unused include
pwm: Replace ENOTSUPP with EOPNOTSUPP
pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()
pwm: Stop referencing pwm->chip
pwm: Update kernel doc for struct pwm_chip
...
|
|
Pull SoC DT updates from Arnd Bergmann:
"There is one new SoC for each 32-bit Arm and 64-bit RISC-V, but both
the Rockchips rv1109 and Sopgho CV1812H are just minor variations of
already supported chips.
The other six new SoCs are all part of existing arm64 families, but
are somewhat more interesting:
- Samsung ExynosAutov920 is an automotive chip, and the first one we
support based on the Cortex-A78AE core with lockstep mode.
- Google gs101 (Tensor G1) is the chip used in a number of Pixel
phones, and is grouped with Samsung Exynos here since it is based
on the same SoC design, sharing most of its IP blocks with that
series.
- MediaTek MT8188 is a new chip used for mid-range tablets and
Chromebooks, using two Cortex-A78 cores where the older MT8195 had
four of them.
- Qualcomm SM8650 (Snapdragon 8 Gen 3) is their current top range
phone SoC and the first supported chip based on Cortex-X4,
Cortex-A720 and Cortex-A520.
- Qualcomm X1E80100 (Snapdragon X Elite) in turn is the latest Laptop
chip using the custom Oryon cores.
- Unisoc UMS9620 (Tanggula 7 series) is a 5G phone SoC based on
Cortex-A76 and Cortex-A55
In terms of boards, we have
- Five old Microsoft Lumia phones, the HTC One Mini 2, Motorola Moto
G 4G, and Huawei Honor 5X/GR5, all based on Snapdragon SoCs.
- Multiple Rockchips mobile gaming systems (Anbernic RG351V, Powkiddy
RK2023, Powkiddy X55) along with the Sonoff iHost Smart Home Hub
and a few Rockchips SBCs
- Some ComXpress boards based on Marvell CN913x, which is the
follow-up to Armada 7xxx/8xxx.
- Six new industrial/embedded boards based on NXP i.MX8 and i.MX9
- Mediatek MT8183 based Chromebooks from Lenovo, Asus and Acer.
- Toradex Verdin AM62 Mallow carrier for TI AM62
- Huashan Pi board based on the SophGo CV1812H RISC-V chip
- Two boards based on Allwinner H616/H618
- A number of reference boards for various added SoCs from Qualcomm,
Mediatek, Google, Samsung, NXP and Spreadtrum
As usual, there are cleanups and warning fixes across all platforms as
well as added features for several of them"
* tag 'soc-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (857 commits)
ARM: dts: usr8200: Fix phy registers
arm64: dts: intel: minor whitespace cleanup around '='
arm64: dts: socfpga: agilex: drop redundant status
arm64: dts: socfpga: agilex: add unit address to soc node
arm64: dts: socfpga: agilex: move firmware out of soc node
arm64: dts: socfpga: agilex: move FPGA region out of soc node
arm64: dts: socfpga: agilex: align pin-controller name with bindings
arm64: dts: socfpga: stratix10_swvp: drop unsupported DW MSHC properties
arm64: dts: socfpga: stratix10_socdk: align NAND chip name with bindings
arm64: dts: socfpga: stratix10: add unit address to soc node
arm64: dts: socfpga: stratix10: move firmware out of soc node
arm64: dts: socfpga: stratix10: move FPGA region out of soc node
arm64: dts: socfpga: stratix10: align pincfg nodes with bindings
arm64: dts: socfpga: stratix10: add clock-names to DWC2 USB
arm64: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
ARM: dts: socfpga: align NAND controller name with bindings
ARM: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
arm64: dts: rockchip: Fix led pinctrl of lubancat 1
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b
...
|
|
Update for yaml and remove the old txt binding.
As we can replace most of the custom timer API with standard Linux
frameworks such as clock framework, let's tag the properties for
ti,prescaler and ti,clock-source as deprecated.
Cc: <[email protected]>
Cc: Nishanth Menon <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Uwe Kleine-König <[email protected]>
Cc: Vignesh Raghavendra <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Reviewed-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
Xinlei Lee's mail is bouncing:
<[email protected]>: host mailgw02.mediatek.com[216.200.240.185] said:
550 Relaying mail to [email protected] is not allowed (in reply to
RCPT TO command)
Remove it.
Signed-off-by: Michael Walle <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
Tesla FSD is a derivative of Samsung Exynos SoC, thus just like the
others it reuses several devices from older designs. Historically we
kept the old (block's) compatible only. This works fine and there is no
bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add Tesla FSD compatible specific to be used with an existing fallback.
Acked-by: Rob Herring <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Use #pwm-cells for all i.MX variants. Only fsl,imx1-pwm does not support
inverted PWM output. Keep it the same for consistency.
Signed-off-by: Alexander Stein <[email protected]>
Reviewed-by: Uwe Kleine-König <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Add samsung,exynosautov920-pwm compatible string to binding document.
Signed-off-by: Jaewon Kim <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Samsung Exynos SoC reuses several devices from older designs, thus
historically we kept the old (block's) compatible only. This works fine
and there is no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to each SoC in front of all old-SoC-like
compatibles.
Reviewed-by: Alim Akhtar <[email protected]>
Acked-by: Rob Herring <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains a few fixes and a bunch of cleanups, a lot of which is
in preparation for Uwe's character device support that may be ready in
time for the next merge window"
* tag 'pwm/for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
pwm: samsung: Document new member .channel in struct samsung_pwm_chip
pwm: bcm2835: Add support for suspend/resume
pwm: brcmstb: Checked clk_prepare_enable() return value
pwm: brcmstb: Utilize appropriate clock APIs in suspend/resume
pwm: pxa: Explicitly include correct DT includes
pwm: cros-ec: Simplify using devm_pwmchip_add() and dev_err_probe()
pwm: samsung: Consistently use the same name for driver data
pwm: vt8500: Simplify using devm functions
pwm: sprd: Simplify using devm_pwmchip_add() and dev_err_probe()
pwm: sprd: Provide a helper to cast a chip to driver data
pwm: spear: Simplify using devm functions
pwm: mtk-disp: Simplify using devm_pwmchip_add()
pwm: imx-tpm: Simplify using devm functions
pwm: brcmstb: Simplify using devm functions
pwm: bcm2835: Simplify using devm functions
pwm: bcm-iproc: Simplify using devm functions
pwm: Adapt sysfs API documentation to reality
pwm: dwc: add PWM bit unset in get_state call
pwm: dwc: make timer clock configurable
pwm: dwc: split pci out of core driver
...
|
|
The 'clocks' property is mandatory for the PWM to operate.
Document it.
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Uwe Kleine-König <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
imx28 uses the same PWM block that is found on imx23.
Add an entry for fsl,imx28-pwm.
Signed-off-by: Fabio Estevam <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
Document pwm compatible for rv1126 which is fallback compatible
of rk3328-pwm group.
Signed-off-by: Jagan Teki <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Various cleanups and fixes across the board"
* tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (31 commits)
pwm: lpc32xx: Remove handling of PWM channels
pwm: atmel: Simplify using devm functions
dt-bindings: pwm: brcm,kona-pwm: convert to YAML
pwm: stmpe: Handle errors when disabling the signal
pwm: stm32: Simplify using devm_pwmchip_add()
pwm: stm32: Don't modify HW state in .remove() callback
pwm: Fix order of freeing resources in pwmchip_remove()
pwm: ntxec: Use device_set_of_node_from_dev()
pwm: ntxec: Drop a write-only variable from driver data
pwm: pxa: Don't reimplement of_device_get_match_data()
pwm: lpc18xx-sct: Simplify using devm_clk_get_enabled()
pwm: atmel-tcb: Don't track polarity in driver data
pwm: atmel-tcb: Unroll atmel_tcb_pwm_set_polarity() into only caller
pwm: atmel-tcb: Put per-channel data into driver data
pwm: atmel-tcb: Fix resource freeing in error path and remove
pwm: atmel-tcb: Harmonize resource allocation order
pwm: Drop unused #include <linux/radix-tree.h>
pwm: rz-mtu3: Fix build warning 'num_channel_ios' not described
pwm: Remove outdated documentation for pwmchip_remove()
pwm: atmel: Enable clk when pwm already enabled in bootloader
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
|
|
Fix typos in Documentation/devicetree/bindings. The changes are in
descriptions or comments where they shouldn't affect functionality.
Signed-off-by: Bjorn Helgaas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
Convert Broadcom Kona family PWM controller bindings to DT schema.
Change during conversion:
- add used, but previously undocumented brcm,bcm11351-pwm compatible
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Stanislav Jakubek <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
Add samsung,exynosautov9-pwm compatible string to binding document.
Signed-off-by: Jaewon Kim <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"There's a little bit of everything in here: we've got various
improvements and cleanups to drivers, some fixes across the board and
a bit of new hardware support"
* tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (22 commits)
dt-bindings: pwm: convert pwm-bcm2835 bindings to YAML
pwm: Add Renesas RZ/G2L MTU3a PWM driver
pwm: mtk_disp: Fix the disable flow of disp_pwm
dt-bindings: pwm: restrict node name suffixes
pwm: pca9685: Switch i2c driver back to use .probe()
pwm: ab8500: Fix error code in probe()
MAINTAINERS: add pwm to PolarFire SoC entry
pwm: add microchip soft ip corePWM driver
pwm: sysfs: Do not apply state to already disabled PWMs
pwm: imx-tpm: force 'real_period' to be zero in suspend
pwm: meson: make full use of common clock framework
pwm: meson: don't use hdmi/video clock as mux parent
pwm: meson: switch to using struct clk_parent_data for mux parents
pwm: meson: remove not needed check in meson_pwm_calc
pwm: meson: fix handling of period/duty if greater than UINT_MAX
pwm: meson: modify and simplify calculation in meson_pwm_get_state
dt-bindings: pwm: Add R-Car V3U device tree bindings
dt-bindings: pwm: imx: add i.MX8QXP compatible
pwm: mediatek: Add support for MT7981
dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatible
...
|