aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/power/supply
AgeCommit message (Collapse)AuthorFilesLines
2024-09-03dt-bindings: power: supply: axp20x: Add AXP717 compatibleChris Morgan1-0/+1
Add binding information for AXP717. Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Chris Morgan <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>
2024-09-03dt-bindings: power: supply: axp20x: Add AXP717 compatibleChris Morgan1-0/+14
Add support for the AXP717. It has BC 1.2 detection like the AXP813 and uses ADC channels like all other AXP devices, but otherwise is very different requiring new registers for most functions. Acked-by: Krzysztof Kozlowski <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Chris Morgan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>
2024-08-27dt-bindings: power: supply: axp20x-battery: Add monitored-batteryChris Morgan1-0/+6
Document the monitored-battery property, which the existing driver can use to set certain properties. Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Chris Morgan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>
2024-08-27dt-bindings: power: supply: axp20x: Add input-current-limit-microampChris Morgan1-3/+55
Allow specifying a hard limit of the maximum input current. Some PMICs such as the AXP717 can pull up to 3.25A, so allow a value to be specified that clamps this in the event the hardware is not designed for it. Signed-off-by: Chris Morgan <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>
2024-08-27dt-bindings: power: supply: sc27xx-fg: add low voltage alarm IRQStanislav Jakubek1-0/+6
The SC27XX fuel gauge supports a low voltage alarm IRQ, which is used for more accurate battery capacity measurements with lower voltages. This was unfortunately never documented in bindings, do so now. The only in-tree user (sc2731.dtsi) has had interrupts specified since its initial fuel-gauge submission and the current kernel driver returns an error when no interrupt is specified, so also add it to the required list. Signed-off-by: Stanislav Jakubek <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/Zr3SAHlq5A78QvrW@standask-GA-A55M-S2HP Signed-off-by: Sebastian Reichel <[email protected]>
2024-07-04dt-bindings: power: supply: add support for MAX17201/MAX17205 fuel gaugeDimitri Fedrau1-0/+58
Adding documentation for MAXIMs MAX17201/MAX17205 fuel gauge. Reviewed-by: Conor Dooley <[email protected]> Signed-off-by: Dimitri Fedrau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>
2024-04-30dt-bindings: power: supply: max8903: specify flt-gpios as inputHerman van Hazendonk1-1/+1
The FLT pin was incorrected documented as an output. The MAX8903 uses it to signal to the processor that a charging fault has occurred. Signed-off-by: Herman van Hazendonk <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>
2024-01-19Merge tag 'for-v6.8-v2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "New features: - bq24190: Add support for BQ24296 charger Cleanups: - all reset drivers: Stop using module_platform_driver_probe() - gpio-restart: use devm_register_sys_off_handler - pwr-mlxbf: support graceful reboot - cw2015: correct time_to_empty units - qcom-battmgr: Fix driver initialization sequence - bq27xxx: Start/Stop delayed work in suspend/resume - minor cleanups and fixes" * tag 'for-v6.8-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (33 commits) power: supply: bq24190_charger: Fix "initializer element is not constant" error power: supply: bq24190_charger: Add support for BQ24296 dt-bindings: power: supply: bq24190: Add BQ24296 compatible dt-bindings: power: reset: xilinx: Rename node names in examples power: supply: qcom_battmgr: Register the power supplies after PDR is up dt-bindings: power: reset: qcom-pon: fix inconsistent example power: supply: Fix null pointer dereference in smb2_probe power: reset: at91: Drop '__init' from at91_wakeup_status() power: supply: Use multiple MODULE_AUTHOR statements power: supply: Fix indentation and some other warnings power: reset: gpio-restart: Use devm_register_sys_off_handler() power: supply: bq256xx: fix some problem in bq256xx_hw_init power: supply: cw2015: correct time_to_empty units in sysfs power: reset: at91-sama5d2_shdwc: Convert to platform remove callback returning void power: reset: at91-reset: Convert to platform remove callback returning void power: reset: tps65086-restart: Convert to platform remove callback returning void power: reset: syscon-poweroff: Convert to platform remove callback returning void power: reset: rmobile-reset: Convert to platform remove callback returning void power: reset: restart-poweroff: Convert to platform remove callback returning void power: reset: regulator-poweroff: Convert to platform remove callback returning void ...
2023-12-25dt-bindings: power: supply: bq24190: Add BQ24296 compatibleHermes Zhang1-0/+1
The BQ24296 is most similar to the BQ24196, but the: 1. OTG config is split from CHG config (REG01) 2. ICHG (Fast Charge Current limit) range is smaller (<=3008mA) 3. NTC fault is simplified to 2 bits Signed-off-by: Hermes Zhang <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>
2023-11-29dt-bindings: correct white-spaces in examplesKrzysztof Kozlowski1-4/+4
Use only one and exactly one space around '=' in DTS example. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Mathieu Poirier <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Acked-by: Serge Semin <[email protected]> Acked-by: Ulf Hansson <[email protected]> # For MMC Acked-by: Jonathan Cameron <[email protected]> #for-iio Acked-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2023-11-02Merge tag 'mfd-next-6.7' of ↵Linus Torvalds1-18/+0
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Allow all MFD Cell properties to be filled in dynamically at runtime - Skip disabled device nodes and continue to look for subsequent devices New Device Support: - Add support for Lunar Lake-M PCI to Intel LPSS PCI - Add support for Denverton to Intel ICH LPC New Functionality: - Add support for Clocks to Texas Instruments TWL* Core - Add support for Interrupts to STMicroelectronics STM32 Timers Fix-ups: - Convert to new devm-* (managed) power-off API - Remove superfluous code - Bunch of Device Tree additions, conversions and adaptions - Simplify obtaining resources (memory, device data) using unified API helpers - Trivial coding-style / spelling type clean-ups - Constify / staticify changes - Expand or edit on existing documentation - Convert some Regmap configurations to use the Maple Tree cache - Apply new __counted_by() annotation to several data structures containing flexible arrays - Replace strncpy() with strscpy() Bug Fixes: - Remove double put creating reference imbalances - Ensure headphone/lineout detection gets set when booting with ACPI" * tag 'mfd-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits) mfd: lpc_ich: Mark *_gpio_offsets data with const spmi: rename spmi device lookup helper spmi: document spmi_device_from_of() refcounting dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema mfd: rk8xx: Add support for RK806 power off mfd: rk8xx: Add support for standard system-power-controller property dt-bindings: mfd: rk806: Allow system-power-controller property dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller dt-bindings: mfd: max8925: Convert to DT schema format mfd: Use i2c_get_match_data() in a selection of drivers mfd: Use device_get_match_data() in a bunch of drivers mfd: mc13xxx-spi/wm831x-spi: Use spi_get_device_match_data() mfd: motorola-cpcap: Drop unnecessary of_match_device() call mfd: arizona-spi: Set pdata.hpdet_channel for ACPI enumerated devs mfd: qcom-spmi-pmic: Switch to EXPORT_SYMBOL_GPL() mfd: qcom-spmi-pmic: Fix revid implementation mfd: qcom-spmi-pmic: Fix reference leaks in revid helper mfd: intel-m10-bmc: Change contact for ABI docs mfd: max8907: Convert to use maple tree register cache mfd: max77686: Convert to use maple tree register cache ...
2023-11-01dt-bindings: mfd: max8925: Convert to DT schema formatSebastian Reichel1-18/+0
Convert the binding to DT schema format. The sub-functions of this MFD device do not have their own compatible string and are thus described directly in the MFD binding document after being converted to YAML. Signed-off-by: Sebastian Reichel <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2023-09-30dt-bindings: power: supply: sbs-manager: Add missing unevaluatedProperties ↵Rob Herring1-0/+6
on child node schemas Just as unevaluatedProperties or additionalProperties are required at the top level of schemas, they should (and will) also be required for child node schemas. That ensures only documented properties are present for any node. Add unevaluatedProperties as needed, and then add any missing properties flagged by the addition. Signed-off-by: Rob Herring <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>
2023-09-18dt-bindings: power: supply: Drop deprecated ab8500-batterySebastian Reichel1-34/+0
Linus Walleij modified AB8500 to use the generic simple-battery and samsung,battery bindings. This is an unused leftover that can be removed. Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>
2023-09-15dt-bindings: power: supply: Add pm8916 LBCNikita Travkin1-0/+128
Qualcomm Linear Battery Charger is a CC/CV charger block in PM8916 PMIC. Document it's DT binding. Signed-off-by: Nikita Travkin <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>
2023-09-15dt-bindings: power: supply: Add pm8916 VM-BMSNikita Travkin1-0/+83
Qualcomm Voltage Mode BMS is a battery monitoring block in PM8916 PMIC. Document it's DT binding. Signed-off-by: Nikita Travkin <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>
2023-09-15dt-bindings: power: supply: Document Mitsumi MM8013 fuel gaugeKonrad Dybcio1-0/+38
The Mitsumi MM8013 is an I2C fuel gauge for Li-Ion cells. The partial datasheet is available at [1]. Add bindings for this chip. [1] https://www.mitsumi.co.jp/latest-M/Catalog/pdf/battery_mm_8013_e.pdf Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>
2023-09-14dt-bindings: power: supply: maxim,max17040: add temperature supportSvyatoslav Ryhel1-0/+31
Add temperature monitoring support. Signed-off-by: Svyatoslav Ryhel <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Iskren Chernev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]>
2023-08-23dt-bindings: use capital "OR" for multiple licenses in SPDXKrzysztof Kozlowski1-1/+1
Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Correct also the format // -> .* in few Allwinner binding headers as pointed out by checkpatch: WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Guenter Roeck <[email protected]> Acked-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2023-08-18dt-bindings: Fix typosBjorn Helgaas1-1/+1
Fix typos in Documentation/devicetree/bindings. The changes are in descriptions or comments where they shouldn't affect functionality. Signed-off-by: Bjorn Helgaas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2023-07-03Merge tag 'for-v6.5' of ↵Linus Torvalds3-0/+101
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - Add new Qualcomm PMI8998/PM660 SMB2 charger - bq256xx: support systems without thermistors - cros_pchg: fix peripheral device status after system resume - axp20x_usb_power: add support for AXP192 - qcom-pon: add support for pm8941 - at91-reset: prepare to expose reset reason to sysfs - switch all I2C drivers back to use .probe instead of .probe_new - convert some more DT bindings to YAML - misc cleanups * tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits) MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml power: reset: at91-reset: change the power on reason prototype power: reset: qcom-pon: add support for pm8941-pon dt-bindings: power: reset: qcom-pon: define pm8941-pon power: supply: add Qualcomm PMI8998 SMB2 Charger driver dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver power: supply: rt9467: Make charger-enable control as logic level power: supply: Switch i2c drivers back to use .probe() power: reset: add HAS_IOPORT dependencies dt-bindings: power: supply: axp20x: Add AXP192 compatible power: supply: axp20x_usb_power: Add support for AXP192 power: supply: axp20x_usb_power: Remove variant IDs from VBUS polling check power: supply: axp20x_usb_power: Use regmap field for VBUS disabling power: supply: axp20x_usb_power: Use regmap fields for USB BC feature power: supply: axp20x_usb_power: Use regmap fields for VBUS monitor feature power: supply: axp20x_usb_power: Simplify USB current limit handling power: supply: hwmon: constify pointers to hwmon_channel_info power: supply: twl4030_madc_battery: Refactor twl4030_madc_bat_ext_changed() ...
2023-06-09dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driverCaleb Connolly1-0/+82
Add devicetree bindings for the Qualcomm PMI8998/PM660 SMB2 charger driver. Signed-off-by: Caleb Connolly <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2023-06-08dt-bindings: Add rt5033 MFD, Regulator and ChargerJakob Hauser1-0/+65
Add device tree binding documentation for rt5033 multifunction device, voltage regulator and battery charger. Signed-off-by: Jakob Hauser <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/bff139976865c2a489ab62333d78c4e3179a8eae.1684182964.git.jahau@rocketmail.com
2023-06-08dt-bindings: power: supply: rt5033-battery: Apply unevaluatedPropertiesJakob Hauser1-1/+1
Additionally to the already available ref "power-supply.yaml", replace "additionalProperties: false" by "unevaluatedProperties: false". Otherwise, when referencing rt5033-battery in an example, message "'power-supplies' does not match any of the regexes: 'pinctrl-[0-9]+'" will be returned. Signed-off-by: Jakob Hauser <[email protected]> Acked-by: Conor Dooley <[email protected]> Acked-by: Sebastian Reichel <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/ef86067348f01a3bbf1bd9b4f81716b62ea1f552.1684182964.git.jahau@rocketmail.com
2023-05-15dt-bindings: power: supply: axp20x: Add AXP192 compatibleAidan MacDonald1-0/+1
The AXP192 is most similar to the AXP202, but the current limits are different and the USB OTG status register has a different address (0x04 instead of 0x02). Signed-off-by: Aidan MacDonald <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2023-05-08dt-bindings: power: supply: bq256xx: Add ti,no-thermistor propertyHermes Zhang1-0/+18
Add a new property ti,no-thermistor to indicate that no thermistor is connected to the TS pin of the chip. Signed-off-by: Hermes Zhang <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2023-04-29Merge tag 'for-v6.4' of ↵Linus Torvalds1-0/+70
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - power-supply core support for automatic handling of constant battery data supplied by firmware - generic-adc-battery: major cleanup - axp288_charger: fix ACPI issues on x86 Android tablets - rk817: cleanup and fix handling for low state of charge * tag 'for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (26 commits) power: supply: rk817: Fix low SOC bugs power: supply: rk817: Drop unneeded debugging code power: supply: axp288_charger: Use alt usb-id extcon on some x86 android tablets power: supply: generic-adc-battery: style fixes power: supply: generic-adc-battery: improve error message power: supply: generic-adc-battery: update copyright info power: supply: generic-adc-battery: add DT support power: supply: generic-adc-battery: add temperature support power: supply: generic-adc-battery: simplify read_channel logic power: supply: generic-adc-battery: use simple-battery API power: supply: generic-adc-battery: drop memory alloc error message power: supply: generic-adc-battery: drop charge now support power: supply: generic-adc-battery: drop jitter delay support power: supply: generic-adc-battery: fix unit scaling power: supply: generic-adc-battery: convert to managed resources power: supply: core: auto-exposure of simple-battery data dt-bindings: power: supply: adc-battery: add binding power: supply: bq256xx: Support to disable charger power: supply: charger-manager: Use of_property_read_bool() for boolean properties power: reset: qcom-pon: drop of_match_ptr for ID table ...
2023-04-05dt-bindings: Add missing (unevaluated|additional)Properties on child node ↵Rob Herring1-0/+1
schemas Just as unevaluatedProperties or additionalProperties are required at the top level of schemas, they should (and will) also be required for child node schemas. That ensures only documented properties are present. Add unevaluatedProperties or additionalProperties as appropriate, and then add any missing properties flagged by the addition. Acked-by: Sebastian Reichel <[email protected]> Acked-by: Guenter Roeck <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Acked-by: Mark Brown <[email protected]> Acked-by: Lee Jones <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2023-03-20dt-bindings: power: supply: adc-battery: add bindingSebastian Reichel1-0/+70
Add binding for a battery that is only monitored via ADC channels and simple status GPIOs. Reviewed-by: Matti Vaittinen <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2023-03-08dt-bindings: Fix SPI and I2C bus node names in examplesRob Herring15-23/+24
SPI and I2C bus node names are expected to be "spi" or "i2c", respectively, with nothing else, a unit-address, or a '-N' index. A pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these cases. Mostly scripted with the following commands: git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/' git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/' With this, a few errors in examples were exposed and fixed. Acked-by: Sam Ravnborg <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Reviewed-by: Simon Glass <[email protected]> Acked-by: Marc Kleine-Budde <[email protected]> # for the microchip,mcp251xfd.yaml Acked-by: Mark Brown <[email protected]> Acked-by: Bartosz Golaszewski <[email protected]> Acked-by: Sebastian Reichel <[email protected]> # for power-supply Acked-by: Wolfram Sang <[email protected]> Acked-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2023-02-25dt-bindings: power: supply: Revise Richtek RT9467 compatible nameChiaEn Wu1-3/+3
Revise RT9467 compatible name from "richtek,rt9467-charger" to "richtek,rt9467" because it has to match the "compatible name" in the source code. Fixes: e1b4620fb503 ("dt-bindings: power: supply: Add Richtek RT9467 battery charger") Reported-by: Rob Herring <[email protected]> Signed-off-by: ChiaEn Wu <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2023-02-15dt-bindings: power: supply: pm8941-coincell: Don't require charging propertiesKonrad Dybcio1-4/+8
It's fine for these properties to be absent, as the driver doesn't fail without them and functions with settings inherited from the reset/previous stage bootloader state. Fixes: 6c463222a21d ("dt-bindings: power: supply: pm8941-coincell: Convert to DT schema format") Signed-off-by: Konrad Dybcio <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2023-02-15dt-bindings: power: supply: pm8941-coincell: Add PM8998 compatibleKonrad Dybcio1-1/+7
Add a specific compatible for the coincell charger present on PM8998. Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2023-02-03dt-bindings: power: supply: Add Richtek RT9467 battery chargerChiaEn Wu1-0/+82
Add bindings for the Richtek RT9467 battery charger. Reviewed-by: Krzysztof Kozlowski <[email protected]> Co-developed-by: ChiYuan Huang <[email protected]> Signed-off-by: ChiYuan Huang <[email protected]> Signed-off-by: ChiaEn Wu <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2023-02-03dt-bindings: power: supply: Add Richtek RT9471 battery chargerChiYuan Huang1-0/+73
Add bindings for the Richtek RT9471 I2C controlled battery charger. Reviewed-by: Krzysztof Kozlowski <[email protected]> Co-developed-by: Alina Yu <[email protected]> Signed-off-by: Alina Yu <[email protected]> Signed-off-by: ChiYuan Huang <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2022-12-21Merge tag 'mfd-next-6.2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Ampere Computing SMpro - Add support for TI TPS65219 PMIC New Functionality: - Add support for multiple devices of the same type; rk808 Fix-ups: - Convert a bunch of I2C class drivers over to .probe_new() - Remove superfluous includes; mc13xxx-*, palmas, timberdale - Use correct includes for GPIO handling; madera-core - Convert to GPIOD; twl6040 - Remove unused platform data handling; twl6040 - Device Tree changes; many - Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld - Add support for modules; palmas - Enable COMPILE_TEST support; intel_soc_pmic* - Trivial: spelling / whitespace fixes; mc13xxx-spi - Replace old PM helpers with new ones; many - Convert deprecated mask_invert usage to unmask_base; many - Use devm_*() calls; qcom_rpm - MAINTAINER fix-ups - Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc, stm32-lptimer, qcom_rpm, rohm-* Bug Fixes: - Add bounds / error checking; mt6360-core - No sleeping inside critical sections; axp20x - Fix missing dependencies; ROHM_BD957XMUF - Repair error paths; qcom-pm8008" * tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits) dt-bindings: mfd: da9062: Correct file name for watchdog mfd: pm8008: Fix return value check in pm8008_probe() mfd: rohm: Use dev_err_probe() mfd: Drop obsolete dependencies on COMPILE_TEST dt-bindings: mfd: da9062: Move IRQ to optional properties mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe() mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource() mfd: rohm-bd9576: Convert to i2c's .probe_new() mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource() dt-bindings: Fix maintainer email for a few ROHM ICs mfd: palmas: Use device_get_match_data() to simplify the code Input: Add tps65219 interrupt driven powerbutton mfd: tps65219: Add driver for TI TPS65219 PMIC mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ mfd: wcd934x: Convert irq chip to config regs mfd: tps65090: Replace irqchip mask_invert with unmask_base mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base mfd: stpmic1: Fix swapped mask/unmask in irq chip mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base ...
2022-12-20Merge tag 'devicetree-for-6.2-2' of ↵Linus Torvalds17-17/+17
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull more devicetree updates from Rob Herring: "This is mostly a treewide clean-up from Krzysztof. There's also a couple of fixes and things that fell thru the cracks. I must say this has been a nice merge window without bindings dumped in at the last minute introducing warnings. Summary: - Treewide dropping of redundant 'binding' or 'schema' from schema titles. This will be followed up with a automated check to catch these. - Re-sort vendor-prefies - Convert GPIO based watchdog to schema - Handle all the variations for clocks, resets, power domains in i.MX PCIe binding - Document missing 'power-domains' property in mxsfb - Fix error with path references in Tegra XUSB example - Honor CONFIG_CMDLINE* even without /chosen node" * tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: drop redundant part of title (manual) dt-bindings: clock: drop redundant part of title dt-bindings: drop redundant part of title (beginning) dt-bindings: drop redundant part of title (end, part three) dt-bindings: drop redundant part of title (end, part two) dt-bindings: drop redundant part of title (end) dt-bindings: clock: st,stm32mp1-rcc: add proper title dt-bindings: memory-controllers: ti,gpmc-child: drop redundant part of title dt-bindings: drop redundant part of title of shared bindings dt-bindings: watchdog: gpio: Convert bindings to YAML dt-bindings: imx6q-pcie: Handle more resets on legacy platforms dt-bindings: imx6q-pcie: Handle various PD configurations dt-bindings: imx6q-pcie: Handle various clock configurations dt-bindings: hwmon: ntc-thermistor: drop Naveen Krishna Chatradhi from maintainers dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property dt-bindings: vendor-prefixes: sort entries alphabetically dt-bindings: usb: tegra-xusb: Remove path references of: fdt: Honor CONFIG_CMDLINE* even without /chosen node
2022-12-17Merge tag 'for-v6.2' of ↵Linus Torvalds7-11/+21
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - bq25890: add charge voltage/current support - bd99954: convert to linear range - convert all i2c drivers to use probe_new - misc fixes and cleanups * tag 'for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (51 commits) power: supply: fix null pointer dereferencing in power_supply_get_battery_info power: supply: bq25890: Fix usb-notifier probe and remove races power: supply: bq25890: Ensure pump_express_work is cancelled on remove power: supply: Fix refcount leak in rk817_charger_probe power: supply: bq25890: Only use pdata->regulator_init_data for vbus power: supply: ab8500: Fix error handling in ab8500_charger_init() power: supply: cw2015: Fix potential null-ptr-deref in cw_bat_probe() power: supply: z2_battery: Fix possible memleak in z2_batt_probe() power: supply: z2_battery: Convert to i2c's .probe_new() power: supply: ucs1002: Convert to i2c's .probe_new() power: supply: smb347: Convert to i2c's .probe_new() power: supply: sbs-manager: Convert to i2c's .probe_new() power: supply: sbs: Convert to i2c's .probe_new() power: supply: rt9455: Convert to i2c's .probe_new() power: supply: rt5033_battery: Convert to i2c's .probe_new() power: supply: max17042_battery: Convert to i2c's .probe_new() power: supply: max17040: Convert to i2c's .probe_new() power: supply: max14656: Convert to i2c's .probe_new() power: supply: ltc4162-l: Convert to i2c's .probe_new() power: supply: ltc2941: Convert to i2c's .probe_new() ...
2022-12-16dt-bindings: drop redundant part of title (beginning)Krzysztof Kozlowski9-9/+9
The Devicetree bindings document does not have to say in the title that it is a "Devicetree binding", but instead just describe the hardware. Drop beginning "Devicetree bindings" in various forms: find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -exec sed -i -e 's/^title: [dD]evice[ -]\?[tT]ree [bB]indings\? for \([tT]he \)\?\(.*\)$/title: \u\2/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -exec sed -i -e 's/^title: [bB]indings\? for \([tT]he \)\?\(.*\)$/title: \u\2/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -exec sed -i -e 's/^title: [dD][tT] [bB]indings\? for \([tT]he \)\?\(.*\)$/title: \u\2/' {} \; Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Reviewed-by: Jonathan Cameron <[email protected]> Acked-by: Ulf Hansson <[email protected]> # MMC Acked-by: Stephen Boyd <[email protected]> # clk Acked-by: Dmitry Torokhov <[email protected]> # input Acked-by: Mark Brown <[email protected]> Acked-by: Sebastian Reichel <[email protected]> # power Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2022-12-16dt-bindings: drop redundant part of title (end, part three)Krzysztof Kozlowski6-6/+6
The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. Drop trailing "bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Acked-by: Matti Vaittinen <[email protected]> # ROHM Acked-by: Ulf Hansson <[email protected]> # MMC Acked-by: Stephen Boyd <[email protected]> # clk Acked-by: Dmitry Torokhov <[email protected]> # input Acked-by: Mark Brown <[email protected]> Acked-by: Hans Verkuil <[email protected]> # media Acked-by: Sebastian Reichel <[email protected]> # power Acked-by: Viresh Kumar <[email protected]> # cpufreq Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2022-12-16dt-bindings: drop redundant part of title (end)Krzysztof Kozlowski2-2/+2
The Devicetree bindings document does not have to say in the title that it is a "Devicetree binding", but instead just describe the hardware. Drop trailing "Devicetree bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[tT]ree [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[nN]ode [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD][tT] [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Acked-by: Jonathan Cameron <[email protected]> # IIO Reviewed-by: Jonathan Cameron <[email protected]> Acked-by: Ulf Hansson <[email protected]> # MMC Acked-by: Stephen Boyd <[email protected]> # clk Acked-by: Dmitry Torokhov <[email protected]> # input Acked-by: Mark Brown <[email protected]> Acked-by: Hans Verkuil <[email protected]> # media Acked-by: Sebastian Reichel <[email protected]> # power Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2022-12-08dt-bindings: Add missing 'unevaluatedProperties' to regulator nodesRob Herring1-1/+1
Several regulator schemas are missing 'unevaluatedProperties' constraint which means any extra properties are allowed. Upon adding the constraint, there's numerous warnings from using the deprecated 'regulator-compatible' property. Remove the usage as examples shouldn't be using long since deprecated properties. Signed-off-by: Rob Herring <[email protected]> Acked-by: Lee Jones <[email protected]> Acked-by: Sebastian Reichel <[email protected]> Acked-by: Bartosz Golaszewski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-12-07dt-bindings: Fix maintainer email for a few ROHM ICsMatti Vaittinen1-1/+1
The email backend used by ROHM keeps labeling patches as spam. This can result to missing the patches. Switch my mail address from a company mail to a personal one. Signed-off-by: Matti Vaittinen <[email protected]> Acked-by: Sebastian Reichel <[email protected]> Acked-by: Mark Brown <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/7986d30480df6179a3989fba4cd13817738635c5.1669877740.git.mazziesaccount@gmail.com
2022-11-05dt-bindings: power: supply: bq25890: use one fallback compatibleKrzysztof Kozlowski1-5/+9
BQ2589[0256] seem compatible between each other in major aspects and remaining features are auto-detectable (by reading device revision ID register). Existing DTS already uses the compatibles with a fallback, so adjust the bindings to reflect this and fix dtbs_check warning: arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: charger@6a: compatible: ['ti,bq25895', 'ti,bq25890'] is too long Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2022-11-05dt-bindings: power: supply: maxim,max17042: allow power-suppliesKrzysztof Kozlowski1-0/+2
MAX17042 Fuel Gauge uses power-supplies supplies: arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: fuel-gauge@36: 'power-supplies' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2022-11-05dt-bindings: power: supply: bq25890: allow power-supply fieldsKrzysztof Kozlowski1-1/+1
The BQ25890 schema references common power-supply.yaml, so allow all its properties to fix warnings like: arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: charger@6a: 'monitored-battery', 'power-supplies', ... do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2022-11-05dt-bindings: power: supply: define monitored-battery in common placeKrzysztof Kozlowski5-5/+9
Define the type of monitored-battery in power-supply.yaml common schema. Reference the schema where applicable to enforce the above in bindings which have monitored-battery property. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2022-09-16dt-bindings: power: supply: Add MediaTek MT6370 ChargerChiaEn Wu1-0/+96
Add MediaTek MT6370 Charger binding documentation. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: ChiaEn Wu <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2022-08-12Merge tag 'devicetree-fixes-for-6.0-1' of ↵Linus Torvalds3-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix schema warnings in qcom,ipq6018-pinctrl and sdhci-msm - Convert Qualcomm SPMI PMIC to DT schema - Make secure interrupt optional for arm,mhu - Fix google,cros-ec-typec binding allowed properties - Update a bunch of bouncing email addresses * tag 'devicetree-fixes-for-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: chrome: google,cros-ec-typec: restrict allowed properties dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos dt-bindings: Drop Robert Jones dt-bindings: Drop Beniamin Bia and Stefan Popa dt-bindings: iio: Drop Bogdan Pricop dt-bindings: iio: Drop Joachim Eastwood dt-bindings: mailbox: arm,mhu: Make secure interrupt optional dt-bindings: pinctrl: qcom,ipq6018: Fix example 'gpio-ranges' size dt-bindings: Drop DT_MK_SCHEMA_FLAGS conditional selecting schema files dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC dt-bindings: mmc: sdhci-msm: Fix 'operating-points-v2 was unexpected' issue dt-bindings: display: simple-framebuffer: Drop Bartlomiej Zolnierkiewicz
2022-08-12dt-bindings: Drop Dan Murphy and Ricardo Rivera-MatosKrzysztof Kozlowski3-5/+3
Emails to Dan Murphy and Ricardo Rivera-Matos bounce ("550 Invalid recipient"). Andrew Davis agreed to take over the bindings. Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Mark Brown <[email protected]> Acked-by: Andrew Davis <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Acked-by: Sebastian Reichel <[email protected]> Signed-off-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.