| Age | Commit message (Collapse) | Author | Files | Lines |
|
Correct phy-mode property value to 1000base-x.
Fixes: cbb1ca6d5f9a ("dt-bindings: net: xlnx,axi-ethernet: convert bindings document to yaml")
Signed-off-by: Suraj Gupta <[email protected]>
Reviewed-by: Radhey Shyam Pandey <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The MDIO block in the BCM6846 is not identical to any of the
previous versions, but has extended registers not present in
the other variants. For this reason we need to use a new
compatible especially for this SoC.
Suggested-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/linux-devicetree/[email protected]/
Signed-off-by: Linus Walleij <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ieee802154, bluetooth and netfilter.
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both
dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in
sctp_listen_start
- mac802154: fix potential RCU dereference issue in
mac802154_scan_worker
- eth: fec: restart PPS after link state change"
* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
doc: net: napi: Update documentation for napi_schedule_irqoff
net/ncsi: Disable the ncsi work before freeing the associated structure
net: phy: qt2025: Fix warning: unused import DeviceId
gso: fix udp gso fraglist segmentation after pull from frag_list
bridge: mcast: Fail MDB get request on empty entry
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
net: phy: realtek: Check the index value in led_hw_control_get
ppp: do not assume bh is held in ppp_channel_bridge_input()
selftests: rds: move include.sh to TEST_FILES
net: test for not too small csum_start in virtio_net_hdr_to_skb()
net: gso: fix tcp fraglist segmentation after pull from frag_list
ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
net: add more sanity checks to qdisc_pkt_len_init()
net: avoid potential underflow in qdisc_pkt_len_init() with UFO
net: ethernet: ti: cpsw_ale: Fix warning on some platforms
net: microchip: Make FDMA config symbol invisible
...
|
|
Add missing reg minItems as based on current binding document
only ethernet MAC IO space is a supported configuration.
There is a bug in schema, current examples contain 64-bit
addressing as well as 32-bit addressing. The schema validation
does pass incidentally considering one 64-bit reg address as
two 32-bit reg address entries. If we change axi_ethernet_eth1
example node reg addressing to 32-bit schema validation reports:
Documentation/devicetree/bindings/net/xlnx,axi-ethernet.example.dtb:
ethernet@40000000: reg: [[1073741824, 262144]] is too short
To fix it add missing reg minItems constraints and to make things clearer
stick to 32-bit addressing in examples.
Fixes: cbb1ca6d5f9a ("dt-bindings: net: xlnx,axi-ethernet: convert bindings document to yaml")
Signed-off-by: Ravikanth Tuniki <[email protected]>
Signed-off-by: Radhey Shyam Pandey <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/[email protected]/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604
- btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
- btrtl: Add the support for RTL8922A
- btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
- btnxpuart: Add support for ISO packets
- btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
- btsdio: Do not bind to non-removable CYW4373
- hci_uart: Add support for Amlogic HCI UART
* tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (27 commits)
Bluetooth: btintel_pcie: Allocate memory for driver private data
Bluetooth: btusb: Fix not handling ZPL/short-transfer
Bluetooth: btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
Bluetooth: btsdio: Do not bind to non-removable CYW4373
Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCEL
Bluetooth: CMTP: Mark BT_CMTP as DEPRECATED
Bluetooth: replace deprecated strncpy with strscpy_pad
Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED
Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B
Bluetooth: Use led_set_brightness() in LED trigger activate() callback
Bluetooth: btrtl: Use kvmemdup to simplify the code
Bluetooth: btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
Bluetooth: btrtl: Add the support for RTL8922A
Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed
Bluetooth: hci_conn: Remove redundant memset after kzalloc
Bluetooth: L2CAP: Remove unused declarations
dt-bindings: bluetooth: bring the HW description closer to reality for wcn6855
Bluetooth: btnxpuart: Add support for ISO packets
Bluetooth: hci_h4: Add support for ISO packets in h4_recv.h
Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
...
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Corrected several typos in Documentation/devicetree/bindings files.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Kuan-Wei Chiu <[email protected]>
Reviewed-by: Matti Vaittinen <[email protected]>
Signed-off-by: Yu-Chun Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add YAML bindings for ep93xx SoC Ethernet Controller.
Signed-off-by: Nikita Shubin <[email protected]>
Tested-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
bootloader-backdoor-gpio (along with reset-gpio) is used to enable
bootloader backdoor for flashing new firmware.
The pin and pin level to enable bootloader backdoor is configured using
the following CCFG variables in cc1352p7:
- SET_CCFG_BL_CONFIG_BL_PIN_NO
- SET_CCFG_BL_CONFIG_BL_LEVEL
Acked-by: Conor Dooley <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Ayush Singh <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet
PHY to enable 10BASE-T1S networks. The Ethernet Media Access Controller
(MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible
with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver
integrated into the LAN8650/1. The communication between the Host and the
MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial
Interface (TC6).
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Parthiban Veerasooran <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The "amlogic,tx-delay-ns" property schema has unnecessary type reference
as it's a standard unit suffix, and the constraints are in freeform
text rather than schema.
Signed-off-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Martin Blumenstingl <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As Rob pointed in another mail thread [1], the binding of tja11xx PHY
is completely broken, the schema cannot catch the error in the DTS. A
compatiable string must be needed if we want to add a custom propety.
So extract known PHY IDs from the tja11xx PHY drivers and convert them
into supported compatible string list to fix the broken binding issue.
Fixes: 52b2fe4535ad ("dt-bindings: net: tja11xx: add nxp,refclk_in property")
Link: https://lore.kernel.org/[email protected] # [1]
Signed-off-by: Wei Fang <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Describe the inputs from the PMU that the Bluetooth module on wcn6855
consumes and drop the ones from the host. This breaks the current
contract but the only two users of wcn6855 upstream - sc8280xp based
boards - will be updated in DTS patches sent separately while the
hci_qca driver will remain backwards compatible with older DT sources.
Acked-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
Add binding document for Amlogic Bluetooth chipsets attached over UART.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-09-04-2
this is a pull request of 18 patches for net-next/master.
All 18 patches add support for CAN-FD IP core found on Rockchip
RK3568.
The first patch is co-developed by Elaine Zhang and me and adds DT
bindings documentation.
The remaining 17 patches are by me and add the driver in several
stages.
linux-can-next-for-6.12-20240904-2
* tag 'linux-can-next-for-6.12-20240904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: add support for CAN_CTRLMODE_BERR_REPORTING
can: rockchip_canfd: add support for CAN_CTRLMODE_LOOPBACK
can: rockchip_canfd: add hardware timestamping support
can: rockchip_canfd: enable full TX-FIFO depth of 2
can: rockchip_canfd: prepare to use full TX-FIFO depth
can: rockchip_canfd: add stats support for errata workarounds
can: rockchip_canfd: rkcanfd_get_berr_counter_corrected(): work around broken {RX,TX}ERRORCNT register
can: rockchip_canfd: implement workaround for erratum 12
can: rockchip_canfd: implement workaround for erratum 6
can: rockchip_canfd: add TX PATH
can: rockchip_canfd: rkcanfd_register_done(): add warning for erratum 5
can: rockchip_canfd: rkcanfd_handle_rx_int_one(): implement workaround for erratum 5: check for empty FIFO
can: rockchip_canfd: add notes about known issues
can: rockchip_canfd: add support for rk3568v3
can: rockchip_canfd: add quirk for broken CAN-FD support
can: rockchip_canfd: add quirks for errata workarounds
can: rockchip_canfd: add driver for Rockchip CAN-FD controller
dt-bindings: can: rockchip_canfd: add rockchip CAN-FD controller
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
pull-request: wireless-next-2024-09-04
here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
====================
Conflicts:
drivers/net/wireless/ath/ath12k/hw.c
38055789d151 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850")
8be12629b428 ("wifi: ath12k: restore ASPM for supported hardwares only")
https://lore.kernel.org/[email protected]
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add documentation for the rockchip rk3568 CAN-FD controller.
Co-developed-by: Elaine Zhang <[email protected]>
Signed-off-by: Elaine Zhang <[email protected]>
Tested-by: Alibek Omarov <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
Convert binding doc marvel-8xxx.txt to yaml format.
Additional change:
- Remove marvell,caldata_00_txpwrlimit_2g_cfg_set in example.
- Remove mmc related property in example.
- Add wakeup-source property.
- Remove vmmc-supply and mmc-pwrseq.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dtb: /soc@0/bus@30800000/mmc@30b40000/wifi@1:
failed to match any schema with compatible: ['marvell,sd8997']
Acked-by: Brian Norris <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Convert binding doc microchip,mcp251x.txt to yaml.
Additional change:
- add ref to spi-peripheral-props.yaml
Fix below warning:
arch/arm64/boot/dts/freescale/imx8dx-colibri-eval-v3.dtb: /bus@5a000000/spi@5a020000/can@0:
failed to match any schema with compatible: ['microchip,mcp2515']
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
Document support for the CAN-FD Interface on the Renesas R-Car V4M
(R8A779H0) SoC, which supports up to four channels.
The CAN-FD module on R-Car V4M is very similar to the one on R-Car V4H,
but differs in some hardware parameters, as reflected by the Parameter
Status Information part of the Global IP Version Register. However,
none of this parameterization should have any impact on the driver, as
the driver does not access any register that is impacted by the
parameterization (except for the number of channels).
Signed-off-by: Duy Nguyen <[email protected]>
[geert: Clarify R-Car V4M differences]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/68b5f910bef89508e3455c768844ebe859d6ff1d.1722520779.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
KSZ8895/KSZ8864 is a switch family developed before KSZ8795 and after
KSZ8863, so it shares some registers and functions in those switches.
KSZ8895 has 5 ports and so is more similar to KSZ8795.
KSZ8864 is a 4-port version of KSZ8895. The first port is removed
while port 5 remains as a host port.
Signed-off-by: Tristram Ha <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/BYAPR11MB3558FD0717772263FAD86846EC8B2@BYAPR11MB3558.namprd11.prod.outlook.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add a rockchip,rk3576-gmac compatible for supporting the 2 gmac
devices on the rk3576.
Signed-off-by: Detlev Casanova <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The TPS23881 has an active-low reset pin that can be connected to an
SoC. Document this with the device-tree binding.
Signed-off-by: Kyle Swenson <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Oleksij Rempel <[email protected]>
Reviewed-by: Kory Maincent <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clock-names and reset-names.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for reg, clocks, clock-names, interrupts and interrupt-names.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks and clock-names.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Each variable-length property like interrupts must have fixed
constraints on number of items for given variant in binding. The
clauses in "if:then:" block should define both limits: upper and lower.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Reference common serial properties schema (for children of UART
controllers) to bring common definition of "current-speed" and
"max-speed" properties.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-5-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Some Bluetooth devices bindings are in net/ and some are in
net/bluetooth/, so bring some consistency by putting everything in
net/bluetooth. Rename few bindings to match preferred naming
style: "vendor,device".
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-3-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Change mdio.yaml nodename match pattern to
'^mdio(-(bus|external))?(@.+|-([0-9]+))$'
Fix mdio.yaml wrong parser mdio controller's address instead phy's address
when mdio-mux exista.
For example:
mdio-mux-emi1@54 {
compatible = "mdio-mux-mmioreg", "mdio-mux";
mdio@20 {
reg = <0x20>;
^^^ This is mdio controller register
ethernet-phy@2 {
reg = <0x2>;
^^^ This phy's address
};
};
};
Only phy's address is limited to 31 because MDIO bus definition.
But CHECK_DTBS report below warning:
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: mdio-mux-emi1@54:
mdio@20:reg:0:0: 32 is greater than the maximum of 31
The reason is that "mdio-mux-emi1@54" match "nodename: '^mdio(@.*)?'" in
mdio.yaml.
Change to '^mdio(-(bus|external))?(@.+|-([0-9]+))?$' to avoid wrong match
mdio mux controller's node.
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add microchip,pme-active-high property to set the PME (Power
Management Event) pin polarity for Wake on Lan interrupts.
Note that the polarity is active-low by default.
Signed-off-by: Pieter Van Trappen <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Oleksij Rempel <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
c25504a0ba36 ("dt-bindings: net: fsl,qoriq-mc-dpmac: add missed property phys")
be034ee6c33d ("dt-bindings: net: fsl,qoriq-mc-dpmac: using unevaluatedProperties")
https://lore.kernel.org/[email protected]
drivers/net/dsa/vitesse-vsc73xx-core.c
5b9eebc2c7a5 ("net: dsa: vsc73xx: pass value in phy_write operation")
fa63c6434b6f ("net: dsa: vsc73xx: check busy flag in MDIO operations")
2524d6c28bdc ("net: dsa: vsc73xx: use defined values in phy operations")
https://lore.kernel.org/[email protected]
Resolve by using FIELD_PREP(), Stephen's resolution is simpler.
Adjacent changes:
net/vmw_vsock/af_vsock.c
69139d2919dd ("vsock: fix recursive ->recvmsg calls")
744500d81f81 ("vsock: add support for SIOCOUTQ ioctl")
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Convert binding doc newwork.txt to yaml format.
HDLC part:
- Convert to "fsl,ucc-hdlc.yaml".
- Add missed reg and interrupt property.
- Update example to pass build.
ethernet part:
- Convert to net/fsl,cpm-enet.yaml
- Add 0x in example, which should be hex value
- Add ref to ethernet-controller.yaml
mdio part:
- Convert to net/fsl,cpm-mdio.yaml
- Add 0x in example, which should be hex value
- Add ref to mdio.yaml
Signed-off-by: Frank Li <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Replace additionalProperties with unevaluatedProperties because it have
allOf: $ref: ethernet-controller.yaml#.
Remove all properties, which already defined in ethernet-controller.yaml.
Fixed below CHECK_DTBS warnings:
arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb:
fsl-mc@80c000000: dpmacs:ethernet@11: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/misc/fsl,qoriq-mc.yaml#
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Convert binding doc maxim,ds26522.txt to yaml format.
Additional changes
- Remove spi-max-frequency because ref to
/schemas/spi/spi-peripheral-props.yaml
- Add address-cells and size-cells in example
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/spi@2100000/slic@2: failed to match any schema with compatible: ['maxim,ds26522']
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Add missed property phys, which indicate how connect to serdes phy.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: fsl-mc@80c000000: dpmacs:ethernet@7: Unevaluated properties are not allowed ('phys' was unexpected)
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The flexcan in iMX95 is not compatible with imx93 because wakeup method is
difference. Make fsl,imx95-flexcan not fallback to fsl,imx93-flexcan.
Reviewed-by: Han Xu <[email protected]>
Signed-off-by: Haibo Chen <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
Add common 'can-transceiver' children node for fsl,flexcan.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb: can@2180000: 'can-transceiver' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
Add documentation for the built-in switch which can be found in the
Airoha EN7581 SoC.
Signed-off-by: Lorenzo Bianconi <[email protected]>
Reviewed-by: Arınç ÜNAL <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add a schema validator to vitesse,vsc73xx.yaml for MAC-level RGMII delays
in the CPU port. Additionally, valid values for VSC73XX were defined,
and a common definition for the RX and TX valid range was created.
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Pawel Dembicki <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- qca: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: Add BCM4388 support
- btintel: Add support for BlazarU core
- btintel: Add support for Whale Peak2
- btnxpuart: Add support for AW693 A1 chipset
- btnxpuart: Add support for IW615 chipset
- btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591
* tag 'for-net-next-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (71 commits)
Bluetooth: btmtk: Mark all stub functions as inline
Bluetooth: hci_qca: Fix build error
Bluetooth: hci_qca: use the power sequencer for wcn7850 and wcn6855
Bluetooth: hci_qca: make pwrseq calls the default if available
Bluetooth: hci_qca: unduplicate calls to hci_uart_register_device()
Bluetooth: hci_qca: schedule a devm action for disabling the clock
dt-bindings: bluetooth: qualcomm: describe the inputs from PMU for wcn7850
Bluetooth: btnxpuart: Fix warnings for suspend and resume functions
Bluetooth: btnxpuart: Add system suspend and resume handlers
Bluetooth: btnxpuart: Add support for IW615 chipset
Bluetooth: btnxpuart: Add support for AW693 A1 chipset
Bluetooth: btintel: Add support for Whale Peak2
Bluetooth: btintel: Add support for BlazarU core
Bluetooth: btusb: mediatek: add ISO data transmission functions
Bluetooth: btmtk: move btusb_recv_acl_mtk to btmtk.c
Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c
Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c
Bluetooth: btusb: add callback function in btusb suspend/resume
Bluetooth: btmtk: rename btmediatek_data
Bluetooth: btusb: mediatek: return error for failed reg access
...
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Drop the inputs from the host and instead expect the Bluetooth node to
consume the outputs of the internal PMU. This model is closer to reality
than how we represent it now.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
This helps validating DTS files. Introduced changes:
1. Dropped serial details from example
2. Added required example include
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
QCA6390 has a compatible listed in the bindings but is missing the
regulators description. Add the missing supply property and list the
required ones in the allOf section.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
There is a group of PHY chips supporting BroadR-Reach link modes in
a manner allowing for more or less identical register usage as standard
Clause 22 PHY.
These chips support standard Ethernet link modes as well, however, the
circuitry is mutually exclusive and cannot be auto-detected.
The link modes in question are 100Base-T1 as defined in IEEE802.3bw,
based on Broadcom's 1BR-100 link mode, and newly defined 10Base-T1BRR
(1BR-10 in Broadcom documents).
Add optional brr-mode flag to switch the PHY to BroadR-Reach mode.
Signed-off-by: Kamil Horák (2N) <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This adds a new optional device tree property called firware-name.
Signed-off-by: Neeraj Sanjay Kale <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|