| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add two compatibles for binman entries, as a starting point for the
schema.
Note that, after discussion on v2, we decided to keep the existing
meaning of label so as not to require changes to existing userspace
software when moving to use binman nodes to specify the firmware
layout.
Note also that, after discussion on v6, we decided to use the same
'fixed-partition' schema for the binman features, so this version
adds a new 'binman.yaml' file providing the new compatibles to the
existing partition.yaml binding.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Add three properties for controlling alignment of partitions, aka
'entries' in fixed-partition.
For now there is no explicit mention of hierarchy, so a 'section' is
just the 'fixed-partitions' node.
These new properties are inputs to the Binman packaging process, but are
also needed if the firmware is repacked, to ensure that alignment
constraints are not violated. Therefore they are provided as part of
the schema.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
UBI volumes may be used to contain NVMEM bits, typically device MAC
addresses or wireless radio calibration data.
Signed-off-by: Daniel Golle <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
Add basic bindings for UBI devices and volumes.
Signed-off-by: Daniel Golle <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
The initial description contained a typo.
Signed-off-by: Stefan Wahren <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"The main set of changes is related to Uwe's work converting platform
remove callbacks to return void. Comes next (in number of changes)
Kees' additional structures annotations to improve the sanitizers. The
usual amount of cleanups apply.
About the more substancial contribution, one main function of the
partitions core could return an error which was not checked, this is
now fixed. On the bindings side, fixed partitions can now have a
compression property. Finally, an erroneous situation is now always
avoided in the MAP RAM driver.
CFI:
- A several years old byte swap has been fixed.
NAND:
- The subsystem has, as usual, seen a bit of cleanup being done this
cycle, typically return values of platform_get_irq() and
devm_kasprintf(). There is also a better ECC check in the Arasan
driver. This comes with smaller misc changes.
- In the SPI-NAND world there is now support for Foresee F35SQA002G,
Winbond W25N and XTX XT26 chips.
SPI NOR:
- For SPI NOR we cleaned the flash info entries in order to have them
slimmer and self explanatory. In order to make the entries as slim
as possible, we introduced sane default values so that the actual
flash entries don't need to specify them. We now use a flexible
macro to specify the flash ID instead of the previous INFOx()
macros that had hardcoded ID lengths.
Instead of:
{ "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 0)
OTP_INFO(256, 3, 0x1000, 0x1000) },
We now use:
.id = SNOR_ID(0xef, 0x80, 0x20),
.name = "w25q512nwm",
.otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
- We also removed some flash entries: the very old Catalyst SPI
EEPROMs that were introduced once with the SPI-NOR subsystem, and a
Fujitsu MRAM. Both should use the at25 EEPROM driver. The latter
even has device tree bindings for the at25 driver.
- We made sure that the conversion didn't introduce any unwanted
changes by comparing the .rodata segment before and after the
conversion. The patches landed in linux-next immediately after
v6.6-rc2, we haven't seen any regressions yet.
- Apart of the autumn cleaning we introduced a new flash entry,
at25ff321a, and added block protection support for mt25qu512a"
* tag 'mtd/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (91 commits)
mtd: cfi_cmdset_0001: Byte swap OTP info
mtd: rawnand: meson: check return value of devm_kasprintf()
mtd: rawnand: intel: check return value of devm_kasprintf()
mtd: rawnand: sh_flctl: Convert to module_platform_driver()
mtd: spi-nor: micron-st: use SFDP table for mt25qu512a
mtd: spi-nor: micron-st: enable lock/unlock for mt25qu512a
mtd: rawnand: Remove unused of_gpio.h inclusion
mtd: spinand: Add support for XTX XT26xxxDxxxxx
mtd: spinand: winbond: add support for serial NAND flash
mtd: rawnand: cadence: Annotate struct cdns_nand_chip with __counted_by
mtd: rawnand: Annotate struct mtk_nfc_nand_chip with __counted_by
mtd: spinand: add support for FORESEE F35SQA002G
mtd: rawnand: rockchip: Use struct_size()
mtd: rawnand: arasan: Include ECC syndrome along with in-band data while checking for ECC failure
mtd: Use device_get_match_data()
mtd: spi-nor: nxp-spifi: Convert to platform remove callback returning void
mtd: spi-nor: hisi-sfc: Convert to platform remove callback returning void
mtd: maps: sun_uflash: Convert to platform remove callback returning void
mtd: maps: sa1100-flash: Convert to platform remove callback returning void
mtd: maps: pxa2xx-flash: Convert to platform remove callback returning void
...
|
|
Support for old NVMEM fixed cells was deprecated in favour of
"fixed-layout". It's still part of the nvmem.yaml though and may be
unknowingly used by new bindings added without much of analyze.
To make it more difficult to accidentally support old syntax move its
binding to separated file with "deprecated" in its name.
Signed-off-by: Rafał Miłecki <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Acked-by: Heiko Stuebner <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Sometimes the contents of a partition are compressed. Add a property to
express this and define the algorithm used.
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
This types of NAND partitions appear in OpenWrt and
U-Boot.
Signed-off-by: Linus Walleij <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
"linux,rootfs" is missing a type, add it.
Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
It's supposed to be there and it's needed for proper validation of DTS
files.
This fixes following errors for Northstar based TP-Link routers:
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dtb: flash@0: partitions: 'oneOf' conditional failed, one must be fixed:
'partition-file-system', 'partition-os-image', 'partitions-table-offset' do not match any of the regexes: 'pinctrl-[0-9]+'
'#address-cells' is a required property
'#size-cells' is a required property
'partition-file-system', 'partition-os-image', 'partitions-table-offset' do not match any of the regexes: '^partition@[0-9a-f]+$', 'pinctrl-[0-9]+'
'partition-file-system', 'partition-os-image', 'partitions-table-offset' do not match any of the regexes: '^partition-[0-9a-z]+$', 'pinctrl-[0-9]+'
'fis-index-block' is a required property
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dtb: flash@0: partitions:compatible: 'oneOf' conditional failed, one must be fixed:
['tplink,safeloader-partitions'] is too short
'fixed-partitions' was expected
'sercomm,sc-partitions' was expected
'arm,arm-firmware-suite' was expected
'brcm,bcm4908-partitions' was expected
'brcm,bcm947xx-cfe-partitions' was expected
'linksys,ns-partitions' was expected
'qcom,smem-part' was expected
'redboot-fis' was expected
From schema: Documentation/devicetree/bindings/mtd/mtd.yaml
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dtb: flash@0: partitions: Unevaluated properties are not allowed ('partitions-table-offset' was unexpected)
From schema: Documentation/devicetree/bindings/mtd/mtd.yaml
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dtb: flash@0: partitions: 'oneOf' conditional failed, one must be fixed:
'partition-file-system', 'partition-os-image', 'partitions-table-offset' do not match any of the regexes: 'pinctrl-[0-9]+'
'#address-cells' is a required property
'#size-cells' is a required property
'partition-file-system', 'partition-os-image', 'partitions-table-offset' do not match any of the regexes: '^partition@[0-9a-f]+$', 'pinctrl-[0-9]+'
'partition-file-system', 'partition-os-image', 'partitions-table-offset' do not match any of the regexes: '^partition-[0-9a-z]+$', 'pinctrl-[0-9]+'
'fis-index-block' is a required property
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dtb: flash@0: partitions:compatible: 'oneOf' conditional failed, one must be fixed:
['tplink,safeloader-partitions'] is too short
'fixed-partitions' was expected
'sercomm,sc-partitions' was expected
'arm,arm-firmware-suite' was expected
'brcm,bcm4908-partitions' was expected
'brcm,bcm947xx-cfe-partitions' was expected
'linksys,ns-partitions' was expected
'qcom,smem-part' was expected
'redboot-fis' was expected
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dtb: flash@0: partitions: Unevaluated properties are not allowed ('partitions-table-offset' was unexpected)
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dtb: flash@0: Unevaluated properties are not allowed ('partitions' was unexpected)
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
Signed-off-by: Rafał Miłecki <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <[email protected]>
Acked-by: Jernej Skrabec <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]> #rockchip
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
The 'partition' node name pattern is missing start and end anchors, so
anything is allowed before or after the regex pattern. There's no in tree
users needing that, so add anchors to the pattern.
Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Pratyush Yadav <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.
Drop trailing "bindings" in various forms (also with trailing full
stop):
find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
-not -name 'trivial-devices.yaml' \
-exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \;
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Acked-by: Matti Vaittinen <[email protected]> # ROHM
Acked-by: Ulf Hansson <[email protected]> # MMC
Acked-by: Stephen Boyd <[email protected]> # clk
Acked-by: Dmitry Torokhov <[email protected]> # input
Acked-by: Mark Brown <[email protected]>
Acked-by: Hans Verkuil <[email protected]> # media
Acked-by: Sebastian Reichel <[email protected]> # power
Acked-by: Viresh Kumar <[email protected]> # cpufreq
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Various LED binding conversions and clean-ups. Convert the
ir-spi-led, pwm-ir-tx, and gpio-ir-tx LED bindings to schemas.
Consistently reference LED common.yaml or multi-led schemas and
disallow undefined properties.
- Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
and fsl,imx-fb bindings to schema
- Add ata-generic, Broadcom u-boot environment, and dynamic MTD
sub-partitions bindings.
- Make all SPI based displays reference spi-peripheral-props.yaml
- Fix some schema property regex's which should be fixed strings or
were missing start/end anchors
- Remove 'status' in examples, again...
DT Core:
- Fix a possible NULL dereference in overlay functions
- Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
never worked)
- Add of_address_count() helper to count number of 'reg' entries
- Support .dtso extension for DT overlay source files. Rename staging
and unittest overlay files.
- Update dtc to upstream v1.6.1-63-g55778a03df61"
* tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (42 commits)
dt-bindings: leds: Add missing references to common LED schema
dt-bindings: leds: intel,lgm: Add missing 'led-gpios' property
of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
dt-bindings: lcdif: Fix constraints for imx8mp
media: dt-bindings: atmel,isc: Drop unneeded unevaluatedProperties
dt-bindings: Drop Jee Heng Sia
dt-bindings: thermal: cooling-devices: Add missing cache related properties
dt-bindings: leds: irled: ir-spi-led: convert to DT schema
dt-bindings: leds: irled: pwm-ir-tx: convert to DT schema
dt-bindings: leds: irled: gpio-ir-tx: convert to DT schema
dt-bindings: leds: mt6360: rework to match multi-led
dt-bindings: leds: lp55xx: rework to match multi-led
dt-bindings: leds: lp55xx: switch to preferred 'gpios' suffix
dt-bindings: leds: lp55xx: allow label
dt-bindings: leds: use unevaluatedProperties for common.yaml
dt-bindings: thermal: tsens: Add SM6115 compatible
of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values
dt-bindings: display: Convert fsl,imx-fb.txt to dt-schema
dt-bindings: Add missing start and/or end of line regex anchors
dt-bindings: qcom,pdc: Add missing compatibles
...
|
|
The schema for 'sercomm,scpart-id' is broken. The 'if' condition is
never true because 'compatible' is in the parent node, not the child
node the sub-schema applies to. The example passes as there are no
constraints on additional/unevaluated properties. That's a secondary
issue which is complicated due to nested partitions.
Drop the if/then schema and the unnecessary 'allOf' so that the
'sercomm,scpart-id' property is at least defined.
Cc: Mikhail Zhilkin <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
As recently requested by the binding maintaines, let's use 4 spaces in
the examples.
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
In most cases we try to avoid it but in some cases this is
needed. Clarify why by adding a small comment.
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
The aim of MTD nvmem-cells is to treat MTD partitions as NVMEM
providers. Hence, MTD partition properties are valid here. Let's
reference mtd/partition.yaml which gives us a chance to drop
"additionalProperties: true" in favor of "unevaluatedProperties:
false".
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Memory mapped devices such as parallel NOR flash could make use of the
'ranges' property to translate a nvmem 'reg' cell address to a CPU
address but in practice there is no upstream user nor any declaration of
this property being valid in this case yet, leading to a warning when
constraining a bit more the schema:
.../mtd/partitions/nvmem-cells.example.dtb: calibration@f00000:
Unevaluated properties are not allowed ('ranges' was unexpected)
So let's drop the property from the example, knowing that someone might
actually properly define it some day.
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
As described in dd638202dfb6 ("dt-bindings: mtd: partitions: add additional
example for qcom,smem-part"), the aim of documenting the subnodes was to be
able to declare nvmem cells. Hence, the partition property does not
really apply directly here, let's instead reference nvmem-cells.yaml
first.
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Parser compatibles cannot be used anywhere, and the list is limited. In
order to constrain this list, enumerate them all under the top
"partitions" subnode. New parsers will have to add their own compatible
here as well.
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Over time the various ways to define MTD partitions has evolved. Most of
the controllers support several different bindings. Let's define all
possible choices in one file and mark the legacy ones deprecated. This
way, we can just reference this file and avoid dupplicating these
definitions.
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
TP-Link SafeLoader partitioning means flash contains multiple partitions
defined in the on-flash table. Some of those partitions may have a
special meaning and may require describing additionally. Allow that.
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Linux needs to know what to use as root device. On embedded devices with
flash the only common way to specify that is cmdline & root= parameter.
That solution works with U-Boot which is Linux & cmdline aware but isn't
available with all market bootloaders. Also that method is fragile:
1. Requires specific probing order on multi-flash devices
2. Uses hardcoded partitions indexes
A lot of devices use different partitioning methods. It may be
"fixed-partitions" or some dynamic partitioning (e.g. based on parts
table). For such cases allow "linux,rootfs" property to mark correct
flash partition.
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Most TP-Link home routers use the same partitioning system based on a
custom ASCII table.
It doesn't seem to have any official name. GPL sources contain tool
named simply "make_flash" and Makefile target "FlashMaker".
This partitions table format was first found in devices with a custom
SafeLoader bootloader so it was called SafeLoader by a community. Later
it was ported to other bootloaders but it seems the name sticked.
Add binding for describing flashes with SafeLoader partitions table. It
allows operating systems to parse it properly and register proper flash
layout.
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
U-Boot partition may contain subpartitions. For example Broadcom
includes environment data block in the middle of its U-Boot partition.
This allows describing Broadcom's U-Boot env data and will allow
referencing its NVMEM cell in the future.
Ref: 118f3fbe517f4 ("dt-bindings: mtd: partitions: support label/name only partition")
Ref: dd638202dfb65 ("dt-bindings: mtd: partitions: add additional example for qcom,smem-part")
Signed-off-by: Rafał Miłecki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
Right now there is no (known) real reason for a custom binding for
standard U-Boot partitions. Broadcom's U-Boot however requires extra
handling - looking for environment variables subblocks. This commit adds
Broadcom specific binding.
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Richard Weinberger:
"MTD core changes:
- Dynamic partition support
- Fix deadlock in sm_ftl
- Various refcount fixes in maps, partitions and parser code
- Integer overflow fixes in mtdchar
- Support for Sercomm partitions
NAND driver changes:
- Clockrate fix for arasan
- Add ATO25D1GA support
- Double free fix for meson driver
- Fix probe/remove methods in cafe NAND
- Support unprotected spare data pages in qcom_nandc
SPI NOR core changes:
- move SECT_4K_PMC flag out of the core as it's a vendor specific
flag
- s/addr_width/addr_nbytes/g: address width means the number of IO
lines used for the address, whereas in the code it is used as the
number of address bytes.
- do not change nor->addr_nbytes at SFDP parsing time. At the SFDP
parsing time we should not change members of struct spi_nor, but
instead fill members of struct spi_nor_flash_parameters which could
later on be used by the callers.
- track flash's internal address mode so that we can use 4B opcodes
together with opcodes that don't have a 4B opcode correspondent.
SPI NOR manufacturer drivers changes:
- esmt: Rename "f25l32qa" flash name to "f25l32qa-2s".
- micron-st: Skip FSR reading if SPI controller does not support it
to allow flashes that support FSR to work even when attached to
such SPI controllers.
- spansion: Add s25hl-t/s25hs-t IDs and fixups"
* tag 'mtd/for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (53 commits)
mtd: core: check partition before dereference
mtd: spi-nor: fix spi_nor_spimem_setup_op() call in spi_nor_erase_{sector,chip}()
mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups
mtd: spi-nor: spansion: Add local function to discover page size
mtd: spi-nor: core: Track flash's internal address mode
mtd: spi-nor: core: Return error code from set_4byte_addr_mode()
mtd: spi-nor: Do not change nor->addr_nbytes at SFDP parsing time
mtd: spi-nor: core: Shrink the storage size of the flash_info's addr_nbytes
mtd: spi-nor: s/addr_width/addr_nbytes
mtd: spi-nor: esmt: Use correct name of f25l32qa
mtd: spi-nor: micron-st: Skip FSR reading if SPI controller does not support it
MAINTAINERS: Use my kernel.org email
mtd: rawnand: arasan: Fix clock rate in NV-DDR
mtd: rawnand: arasan: Update NAND bus clock instead of system clock
mtd: core: introduce of support for dynamic partitions
dt-bindings: mtd: partitions: add additional example for qcom,smem-part
dt-bindings: mtd: partitions: support label/name only partition
mtd: spi-nor: move SECT_4K_PMC special handling
mtd: dataflash: Add SPI ID table
mtd: hyperbus: rpc-if: Fix RPM imbalance in probe error path
...
|
|
Convert the arm,arm-firmware-suite partition binding to DT schema
format. Simple conversion as there's only a compatible property.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add additional example for qcom,smem-part to declare a dynamic
partition to provide NVMEM cells for the commonly ART partition
provided by this parser.
Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Document new partition nodes that declare only the label/name instead
of the reg used to provide an OF node for partition registred at runtime
by parsers. This is required for nvmem system to declare and detect
nvmem-cells.
With these special partitions, the reg / offset is not required and a
'partition-' prefix is needed.
The node name with the 'partition-' prefix stripped, is used to match
the partition allocated by the parser at runtime and the parser will
provide reg and offset of the mtd.
If the partition to match contains invalid char for a node name, the
label binding can be used to declare the partition name.
NVMEM will use the data from the parser and provide the NVMEM cells
declared in the DTS, "connecting" the dynamic partition with a
static declaration of cells in them.
Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Extend fixed-partitions binding for support of Sercomm partition parser
(add "sercomm,sc-partitions" compatible).
Signed-off-by: Mikhail Zhilkin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
This helps validating DTS files.
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Converts mtd/partitions/redboot-fis.txt to YAML.
Signed-off-by: Corentin Labbe <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
This adds the description of an additional property which allows to
specify a custom partition parser magic to detect a trx partition.
Buffalo has multiple device which are using the trx format, but with
different magic values.
Signed-off-by: Hauke Mehrtens <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Linksys on Broadcom Northstar devices uses fixed flash layout with
multiple firmware partitions.
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Document nvmem-cells compatible used to treat mtd partitions as a
nvmem provider.
Signed-off-by: Ansuel Smith <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
BCM4908 uses fixed partitions layout but function of some partitions may
vary. Some devices use multiple firmware partitions and those partitions
should be marked to let system discover their purpose.
Signed-off-by: Rafał Miłecki <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
Single partition binding is quite common and may be:
1. Used by multiple parsers
2. Extended for more specific cases
Move it to separated file to avoid code duplication.
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
Add YAML binding for Qualcomm Shared Memory (SMEM) Flash partition
parser.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
This standardizes its documentation, allows validating with Makefile
checks and helps writing DTS files.
Noticeable changes:
1. Dropped "Partitions can be represented by sub-nodes of a flash
device." as we also support subpartitions (don't have to be part of
flash device node)
2. Dropped "to Linux" as bindings are meant to be os agnostic.
Signed-off-by: Rafał Miłecki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
This adds device tree bindings for ARM Firmware Suite
flash partitioning used in NOR flashes on ARM reference
designs.
Cc: [email protected]
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
Describe how to use the BCM963XX ImageTag format in a mixed flash layout
environment.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Jonas Gorski <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
Add binding documentation for the standard CFE based BCM963XX flash
layout, found in most devices using a BCM63XX SoC with NOR flash.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Jonas Gorski <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
This adds device tree bindings for the RedBoot FIS partition
format.
Cc: [email protected]
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
|
|
Broadcom based home router devices use TRX firmware format. It's a
container that can hold few partitions. If operating system is expected
to access them it has to understand that format and parse flash data
accordingly.
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
|
|
Broadcom based home router devices use partitions which have to be
discovered in a specific way. They are not fixed and there is not any
standard partition table. This commit adds and describes a new custom
binding for such devices.
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
|