aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-07-01drm/amd/display: Account for cursor prefetch BW in DML1 mode supportAlvin Lee1-0/+3
[Description] We need to ensure to take into account cursor prefetch BW in mode support or we may pass ModeQuery but fail an actual flip which will cause a hang. Flip may fail because the cursor_pre_bw is populated during mode programming (and mode programming is never called prior to ModeQuery). Reviewed-by: Chaitanya Dhere <[email protected]> Reviewed-by: Nevenko Stupar <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfgPin-yen Lin3-10/+17
Commit 2f7b1d8b5505 ("clk: mediatek: Do a runtime PM get on controllers during probe") enabled runtime PM for all mediatek clock controllers, but this introduced an issue on the resume path. If a device resumes earlier than the clock controller and calls clk_prepare() when runtime PM is enabled on the controller, it will end up calling clk_pm_runtime_get(). But the subsequent pm_runtime_resume_and_get() call will fail because the runtime PM is temporarily disabled during suspend. To workaround this, introduce a need_runtime_pm flag and only enable it on mt8183-mfgcfg, which is the driver that observed deadlock previously. Hopefully mt8183-cfgcfg won't run into the issue at the resume stage because the GPU should have stopped rendering before the system calls suspend. Fixes: 2f7b1d8b5505 ("clk: mediatek: Do a runtime PM get on controllers during probe") Signed-off-by: Pin-yen Lin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2024-07-01drm/amd/display: Add refresh rate range checkTom Chung1-1/+3
[Why] We only enable the VRR while monitor usable refresh rate range is greater than 10 Hz. But we did not check the range in DRM_EDID_FEATURE_CONTINUOUS_FREQ case. [How] Add a refresh rate range check before set the freesync_capable flag in DRM_EDID_FEATURE_CONTINUOUS_FREQ case. Reviewed-by: Mario Limonciello <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Tom Chung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Reset freesync config before update new stateTom Chung1-0/+1
[Why] Sometimes the new_crtc_state->vrr_infopacket did not sync up with the current state. It will affect the update_freesync_state_on_stream() does not update the state correctly. [How] Reset the freesync config before get_freesync_config_for_crtc() to make sure we have the correct new_crtc_state for VRR. Reviewed-by: Sun peng Li <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Tom Chung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01Merge tag 'clk-imx-6.11' of ↵Stephen Boyd16-52/+197
git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux into clk-imx Pull i.MX clk driver updates from Abel Vesa: - Add reset controller support to audiomix block control - Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D lcdif_pixel_src clock - Fix parent clocks for earc_phy and audpll on i.MX8MP - Fix default parents for enet[12]_ref_sel on i.MX6UL - Add ops in composite 8M and 93 that allow no-op on disable - Add check for PCC present bit on composite 7ULP register - Fix fractional part for fracn-gppll on prepare - Fix clock tree update for TF-A managed clocks on i.MX8M - Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D - Add the SAI7 IPG clock for i.MX8MN - Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM - Add LVDS bypass clocks on i.MX8QXP - Add muxes for MIPI and PHY ref clocks - Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP - Add 1039.5MHz and 800MHz rates to fracn-gppll table - Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP - Add some module descriptions to the i.MX generic and the i.MXRT1050 driver. - Fix return value for bypass for composite 7ULP * tag 'clk-imx-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux: (22 commits) clk: imx: composite-7ulp: Use NULL instead of 0 clk: imx: add missing MODULE_DESCRIPTION() macros clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate clk: imx: fracn-gppll: update rate table clk: imx: imx8qxp: Parent should be initialized earlier than the clock clk: imx: imx8qxp: Register dc0_bypass0_clk before disp clk clk: imx: imx8qxp: Add clock muxes for MIPI and PHY ref clocks clk: imx: imx8qxp: Add LVDS bypass clocks clk: imx: imx8mm: Change the 'nand_usdhc_bus' clock to non-critical one clk: imx: imx8mn: add sai7_ipg_clk clock settings clk: imx: add CLK_SET_RATE_PARENT for lcdif_pixel_src for i.MX7D clk: imx: Remove CLK_SET_PARENT_GATE for DRAM mux for i.MX7D clk: imx: imx8mp: fix clock tree update of TF-A managed clocks clk: imx: fracn-gppll: fix fractional part of PLL getting lost clk: imx: composite-7ulp: Check the PCC present bit clk: imx: composite-93: keep root clock on when mcore enabled clk: imx: composite-8m: Enable gate clk with mcore_booted clk: imx: imx6ul: fix default parent for enet*_ref_sel clk: imx: clk-audiomix: Correct parent clock for earc_phy and audpll clk: imx: clk-audiomix: Add CLK_SET_RATE_PARENT flags for clocks ...
2024-07-01Merge tag 'sunxi-clk-for-6.11' of ↵Stephen Boyd28-12/+32
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner Pull Allwinner SoC clk driver updates from Chen-Yu Tsai: - Remove unused 'struct gates_data' from old sunxi driver library - Add missing MODULE_DESCRIPTION() macros for sunxi-ng drivers - Add GPADC clock and reset for H616 * tag 'sunxi-clk-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: h616: Add clock/reset for GPADC dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks clk: sunxi: Remove unused struct 'gates_data' clk: sunxi-ng: add missing MODULE_DESCRIPTION() macros
2024-07-01Merge tag 'sunxi-clk-fixes-for-6.10' of ↵Stephen Boyd1-6/+12
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes Pull one Allwinner SoC clk driver fix for 6.10 - Fix min/max rate clamping that caused a regression back in 6.9 * tag 'sunxi-clk-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
2024-07-01Merge tag 'clk-meson-v6.11-1' of https://github.com/BayLibre/clk-meson into ↵Stephen Boyd30-89/+3873
clk-amlogic Pull Amlogic clock driver updates from Jerome Brunet: - Minor S4 clock fixes - DT bindings Yaml conversion of the AXG audio controller - C3 clock controllers support - Flag added to skip init of already enabled PLLs and avoid relocking - A1 DT bindings updates for system pll support - Add missing MODULE_DESCRIPTION where necessary. * tag 'clk-meson-v6.11-1' of https://github.com/BayLibre/clk-meson: clk: meson: add missing MODULE_DESCRIPTION() macros dt-bindings: clock: meson: a1: peripherals: support sys_pll input dt-bindings: clock: meson: a1: pll: introduce new syspll bindings clk: meson: add 'NOINIT_ENABLED' flag to eliminate init for enabled PLL clk: meson: c3: add c3 clock peripherals controller driver clk: meson: c3: add support for the C3 SoC PLL clock dt-bindings: clock: add Amlogic C3 peripherals clock controller dt-bindings: clock: add Amlogic C3 SCMI clock controller support dt-bindings: clock: add Amlogic C3 PLL clock controller dt-bindings: clock: meson: Convert axg-audio-clkc to YAML format clk: meson: s4: fix pwm_j_div parent clock clk: meson: s4: fix fixed_pll_dco clock
2024-07-01drm/amdgpu: rewrite convert_tiling_flags_to_modifier_gfx12Marek Olšák1-27/+18
There were multiple bugs, like checking SWIZZLE_MODE before checking GFX12_SWIZZLE_MODE, which has undefined behavior. The function had no effect before (it always returned -EINVAL). Signed-off-by: Marek Olšák <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/radeon: check bo_va->bo is non-NULL before using itPierre-Eric Pelloux-Prayer1-1/+1
The call to radeon_vm_clear_freed might clear bo_va->bo, so we have to check it before dereferencing it. Signed-off-by: Pierre-Eric Pelloux-Prayer <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amdkfd: Use device based logging for errorsLijo Lazar5-45/+74
Convert some pr_* to some dev_* APIs to identify the device. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amdgpu: Fix hbm stack id in boot error reportHawking Zhang1-1/+1
To align with firmware, hbm id field 0x1 refers to hbm stack 0, 0x2 refers to hbm statck 1. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amdgpu: add amdgpu_framebuffer::gfx12_dccMarek Olšák2-7/+9
amdgpu_framebuffer doesn't have tiling_flags, so we need this. amdgpu_display_get_fb_info never gets NULL parameters, so checking for NULL was useless. Signed-off-by: Marek Olšák <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amdgpu/display: add all gfx12 modifiersMarek Olšák1-5/+6
Signed-off-by: Marek Olšák <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amdgpu/display: set plane attributes for gfx12 correctlyMarek Olšák1-1/+49
It used gfx9 flags, which has undefined behavior on gfx12. Signed-off-by: Marek Olšák <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amdgpu/display: handle gfx12 in amdgpu_dm_plane_format_mod_supportedMarek Olšák1-22/+25
All this code has undefined behavior on GFX12 and shouldn't be executed. Signed-off-by: Marek Olšák <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amdgpu: handle gfx12 in amdgpu_display_verify_sizesMarek Olšák2-1/+28
It verified GFX9-11 swizzle modes on GFX12, which has undefined behavior. Signed-off-by: Marek Olšák <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amdgpu: Correct register used to clear fault statusHawking Zhang1-1/+1
Driver should write to fault_cntl registers to do one-shot address/status clear. Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amdgpu: don't use amdgpu_lookup_format_info on gfx12Marek Olšák1-0/+4
It only uses fields for GFX9-11 related to the separate DCC buffer, which doesn't exist in GFX12. Signed-off-by: Marek Olšák <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amdgpu/display: handle gfx12 in dm_check_cursor_fbMarek Olšák1-3/+5
Checking SWIZZLE_MODE has undefined behavior on gfx12. Signed-off-by: Marek Olšák <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amdgpu: remove AMD_FMT_MOD_GFX12_DCC_MAX_COMPRESSED_BLOCK_* definitionsMarek Olšák1-3/+0
They were added accidentally. Signed-off-by: Marek Olšák <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amdgpu/gfx12: remove GDS leftoversMarek Olšák1-16/+0
GDS doesn't exist in gfx12. The incomplete packet allows userspace to hang the hw from the kernel. Signed-off-by: Marek Olšák <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amdgpu/gfx12: remove superfluous cache flagsMarek Olšák1-6/+0
If any INV flags are needed, they should be executed via ACQUIRE_MEM before INDIRECT_BUFFER. GLM flags are also removed because the hw ignores them. Signed-off-by: Marek Olšák <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amdgpu/gfx11: remove superfluous cache flagsMarek Olšák1-5/+1
If any INV flags are needed, they should be executed via ACQUIRE_MEM before INDIRECT_BUFFER. Signed-off-by: Marek Olšák <[email protected]> Acked-by: Christian König <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amdgpu: check for LINEAR_ALIGNED correctly in check_tiling_flags_gfx6Marek Olšák1-2/+1
Fix incorrect check. Signed-off-by: Marek Olšák <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: 3.2.291Aric Cyr1-1/+1
* FW Release 0.0.224.0 * Fix bw issue for dcn351 * Fix FAMS2 logic issue for dcn401 * Fix Coverity issues * Fix cursor issues * Refactor dio sources Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupportRoman Li1-1/+1
[Why] Potential out of bounds access in dml2_calculate_rq_and_dlg_params() because the value of out_lowest_state_idx used as an index for FCLKChangeSupport array can be greater than 1. [How] Currently dml2 core specifies identical values for all FCLKChangeSupport elements. Always use index 0 in the condition to avoid out of bounds access. Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Update efficiency bandwidth for dcn351Fangzhi Zuo1-0/+1
Fix 4k240 underflow on dcn351 Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Fangzhi Zuo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Fix refresh rate range for some panelTom Chung1-0/+48
[Why] Some of the panels does not have the refresh rate range info in base EDID and only have the refresh rate range info in DisplayID block. It will cause the max/min freesync refresh rate set to 0. [How] Try to parse the refresh rate range info from DisplayID if the max/min refresh rate is 0. Reviewed-by: Sun peng Li <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Tom Chung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: replace CRTC disable function callXi (Alex) Liu1-2/+2
[Why] In OTG disable workarund, CRTC is disabled immediately to improve performance, but this may cause timing issue in DP HPO encoder FIFO and result in blank CRCs. [How] Replace the immediate CRTC disable call with normal disable call Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Xi (Alex) Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Move dio files into dio folderBhuvanachandra Pinninti19-5/+37
[why] Refactor the code of dio to unit test. [how] Moved files to respective folders and changed cMakeLists and makefiles. Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Bhuvanachandra Pinninti <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Account for cursor prefetch BW in DML1 mode supportAlvin Lee1-0/+3
[Description] We need to ensure to take into account cursor prefetch BW in mode support or we may pass ModeQuery but fail an actual flip which will cause a hang. Flip may fail because the cursor_pre_bw is populated during mode programming (and mode programming is never called prior to ModeQuery). Reviewed-by: Chaitanya Dhere <[email protected]> Reviewed-by: Nevenko Stupar <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: fix a crash when clock source is reference for non otg ↵Wenjing Liu1-18/+20
master pipe [why] The function enumerates all pipes without checking pipe type. It is only supposed to call program pixel clock for OTG master pipe only. Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Fix dmub timeout after fams2 enabledFangzhi Zuo1-1/+6
Reset fams stream count upon stream removal, otherwise fams2 state machine in dmub will get corrupted. Reviewed-by: Dillon Varone <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Fangzhi Zuo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Add debug option for disabling SLDO optimizationsNicholas Kazlauskas3-1/+4
[Why] DM can hook this up to disable SLDO optimizations in firmware during DMCUB initialization for debug purposes. [How] Add the option and pass it through dmub_srv. Reviewed-by: Hansen Dsouza <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: un-block 8k with single dimmPaul Hsieh1-22/+0
[Why] Driver doesn't validate multi-display with scaling when OS calls DDI. This behavior causes the validated result to be a mismatch between some automated test cases. To address this issue, some workaround was added that caused issues in 8k. [How] Since the origin issue had been root caused, revert the previous workaround and unblock 8k with a single dimm. Reviewed-by: Aric Cyr <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Paul Hsieh <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Add available bandwidth calculation for audioRyan Seto2-6/+59
[Why] Audio for 8K 240Hz monitor was not available when it should be [How] Added calculation based on stream state Co-developed-by: Ryan Seto <[email protected]> Reviewed-by: George Shen <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Ryan Seto <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01Merge tag 'renesas-clk-for-v6.11-tag2' of ↵Stephen Boyd15-732/+57
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas Pull Renesas clk driver updates from Geert Uytterhoeven: - Remove obsolete clock DT binding header files - Add Battery Backup (VBATTB) and I2C clocks, resets, and power domains on RZ/G3S - Add audio clocks on R-Car V4M - Add video capture (ISPCS, CSI-2, VIN) clocks on R-Car V4M - Miscellaneous fixes and improvements * tag 'renesas-clk-for-v6.11-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: r9a08g045: Add clock, reset and power domain support for I2C clk: renesas: r8a779h0: Add Audio clocks clk: renesas: r9a08g045: Add clock, reset and power domain support for the VBATTB IP dt-bindings: clock: rcar-gen2: Remove obsolete header files dt-bindings: clock: r8a7779: Remove duplicate newline clk: renesas: Drop "Renesas" from individual driver descriptions clk: renesas: r8a779h0: Fix PLL2/PLL4 multipliers in comments clk: renesas: r8a779h0: Add VIN clocks dt-bindings: clock: renesas,rzg2l-cpg: Update description for #reset-cells clk: renesas: rcar-gen2: Use DEFINE_SPINLOCK() for static spinlock clk: renesas: cpg-lib: Use DEFINE_SPINLOCK() for global spinlock clk: renesas: r8a77970: Use common cpg_lock clk: renesas: r8a779h0: Add CSI-2 clocks clk: renesas: r8a779h0: Add ISPCS clocks
2024-07-01drm/amd/display: Add refresh rate range checkTom Chung1-1/+3
[Why] We only enable the VRR while monitor usable refresh rate range is greater than 10 Hz. But we did not check the range in DRM_EDID_FEATURE_CONTINUOUS_FREQ case. [How] Add a refresh rate range check before set the freesync_capable flag in DRM_EDID_FEATURE_CONTINUOUS_FREQ case. Reviewed-by: Mario Limonciello <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Tom Chung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Cleanup dce_get_dp_ref_freq_khzDillon Varone1-1/+1
[WHY&HOW] Cleanup unnecessary code pathes as compile guards were added and removed overtime. Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Check denominator crb_pipes before usedAlex Hung1-1/+1
[WHAT & HOW] A denominator cannot be 0, and is checked before used. This fixes 2 DIVIDE_BY_ZERO issues reported by Coverity. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Check denominator pbn_div before usedAlex Hung1-1/+1
[WHAT & HOW] A denominator cannot be 0, and is checked before used. This fixes 1 DIVIDE_BY_ZERO issue reported by Coverity. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Adjust cursor visibility between MPC slicesNevenko Stupar2-9/+39
[Why & How] When MPC enabled, need to adjust x and hot spot x position on one pipe when the cursor is between MPC slices i.e. when the cursor is moving from one MPC slice to next slice, while whole cursor size is not contained within one pipe, to make part of the cursor to be visible on the other pipe. Reviewed-by: Sridevi Arvindekar <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Nevenko Stupar <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Skip unnecessary abm disableSherry Wang1-0/+6
[Why] We try to disable abm immediately when it's being gradually disabled, which causes backlight ramping being paused in the middle [How] Don't disable abm immediately if abm has been or is being disabled through set_abm_level path Reviewed-by: Anthony Koo <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Sherry Wang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Fix possible overflow in integer multiplicationAlex Hung13-24/+24
[WHAT & HOW] Integer multiplies integer may overflow in context that expects an expression of unsigned/siged long long (64 bits). This can be fixed by casting integer to unsigned/siged long long to force 64 bits results. This fixes 26 OVERFLOW_BEFORE_WIDEN issues reported by Coverity. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Add ASIC cap to limit DCC surface widthGeorge Shen3-0/+11
[Why] Certain configurations of DCN401 require ODM4:1 to support DCC for 10K surfaces. DCC should be conservatively disabled in those cases. The issue is that current logic limits 10K surface DCC for all configurations of DCN401. [How] Add DC ASIC cap to indicate max surface width that can support DCC. Disable DCC if this ASIC cap is non-zero and surface width exceeds it. Reviewed-by: Jun Lei <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: George Shen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Revert Add workaround to restrict max frac urgent for DPM0Teeger3-19/+0
This reverts commit 871512e36f9c1c2cb4e62eb860ca0438800e4d63 due to multiple issues found. Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Teeger <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Choose HUBP unbounded request based on DML outputSung Joon Kim1-10/+2
[why] Previously, we decide on the unbounded request purely based on pipe_cnt which is a wrong variable to use to determine how many pipes are in "use". DML already accounts for number of pipes in use along with other various factors and is a more reliable method of determination. [how] Use UnboundedRequestEnabledThisState to decide on unbounbded_req_enabled. Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Sung Joon Kim <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Remove unnecessary error messageJoshua Aberback1-3/+1
[Why] This error message is unnecessary because returning when aconnector is uninitialized is the desired outcome during initialization. As well, there is no equivalent error message for read_dpcd. Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Joshua Aberback <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-07-01drm/amd/display: Fix divide by zero in CURSOR_DST_X_OFFSET calculationGeorge Shen1-2/+13
[Why] Certain situations cause pipes to have a recout of 0, such as when the dst_rect lies completely outside of a given ODM slice. [How] Skip calculation that transforms cursor coordinates to viewport space. Reviewed-by: Alvin Lee <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: George Shen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.